Filters

List of feeder-bay Tenders

List of latest feeder-bay Tenders in Indian Tenders. Click on any feeder-bay Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for feeder-bay Tenders.

All-Tenders (14)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :49055023 | 12 Jun, 2025

Tender Value : 4.85 Crore

Bengaluru Urban - Karnataka

Tender for tender for provision of deficient smqs at af stn chimney hills; 2 general summary note: schedule ‘a’ part i to xii are prepriced by mes under ser no. 1 to 12. bidders shall insert their lumpsum amount in the green coloured field under col-6 only. 3 lumpsum price worked out by the contractor for “internal water supply” as listed in schedule ‘a’part–ii 4 lumpsum price worked out by the contractor for “internal electric supply as listed in schedule ‘a’part–iii 5 lumpsum price worked out by the contractor for site clearance and development as listed in schedule ‘a’ part - iv . 6 lumpsum price worked out by the contractor for road / path / culvert as listed in schedule ‘a’ part - v . 7 lumpsum price worked out by the contractor for area drainage as listed in schedule ‘a’ part - vi . 8 lumpsum price worked out by the contractor for sewage disposal as listed in schedule ‘a’ part - vii . 9 lumpsum price worked out by the contractor for “fencing” as listed in schedule ‘a’ part – viii. 10 lumpsum price worked out by the contractor for “protective works” as listed in schedule ‘a’ part – ix. 11 lumpsum price worked out by the contractor for “external water supply” as listed in schedule ‘a’ part – x 12 lumpsum price worked out by the contractor for “external electric supply” as listed in schedule ‘a’ part – xi 13 lumpsum price worked out by the contractor for “hot water supply” as listed in schedule ‘a’ part – xii 14 schedule a part - idesign and construction of married accommodation building in 3 storey (ground+2 storey)in framed construction with permanent specifications in rcc of grade as per structural drawings, aac block masonry walls, att, pu based wpt, earthquake resistance as per latest is, green building norms with minimum 3 star griha rating etc complete all as specified and as shown on drawings. 15 design and construction of car and scooter parkingshed in rcc framed construction with permanent specifications in rcc of grade as per structural drawings, aac block masonry walls, pu based wpt, earthquake resistance as per latest is, green building norms with minimum 3 star griha rating etc complete all as specified and as shown on drawings. 16 sch a part - xiii : fittings / fixtures & misc items. internal water supply supply and fix 15mm bore kitchen sink tap, brass chromium plated dual flow pattern with silicon black flexible hose swivel type complete all as specified and as directed. 17 supply and fix 3 in 1 chromium plated wall mixer for mixing hot and cold water (for shower) screwed down for iron pipe and fixed complete all as specified and as directed. 18 internal electric supplysupply and fix modular tv socket, one module all as specified and directed by engineer in charge. 19 supply and fix modular telephone socket, rj-11, one module all as specified and directed by engineer in charge. 20 material and labour for telephone wiring with unarmoured solid annealed bare copper industrial cablein concealed of size 0.5 mm, 3 pair with pvc conduit 25 mm diaall as specified and directed by engineer in charge 21 material and labour for tv wiring with unarmoured coaxial cable, rg-11 in concealedwith pvc conduit 25 mm diaall as specified and directed by engineer in charge . 22 material and labour for mild steel box for telephone wiring including blocks, suitable for 30 pair all as specified and directed by engineer in charge. 23 material and labour for earthing complete with galvanised steel pipe electrode of size 40 mm bore, medium grade, 2.5 meter length, burried directly in ground in bore 350 mm dia vertically to a depth not less 3.2 meter below ground level with top edge of the pipe not less than 60 cm below normal ground level connected to galvanised earth lead wire 4.0mm dia by meanswith bolts, nuts check nuts and washers protected by gl light grade pipe of size 15 mm dia and connecting up with the db as the case may be upto a maximum distance of 7.5m away from the earth electrode including test point junction, excavation, earthwork, pcc chamber, rcc cover(yellow painted) with handle, watering pipe 20mm dia gi medium grade with funnel and wire mesh, charcoal dust , salt, mild steel earth markerwith earthing result, date all as per plate no.2 of ssr 1991 and as directed by engineer in charge. note:-boring charges are included in the above quoted rates 24 smart meter systemdesign, supply, installation, integration, testing and commissioning of smart meter with prepaid metering facility, ac single phase, two wire, 240 volts, 50 hz , 10 to 60 amps all as per bis 16444:2015 (reaffirmed 2020) with plug in type bi- directional communication module (the plug in module shall be field swappable /replaceable), includingnecessary communication infrastructure suitable for integration with approved communication technology gprs/rf/hybrid (gprs+rf) /any other advance technology as per cea /trai regulations etc.easily adaptable for network interface and integration with advance metering infrastructure (ami) of the project area complete in all respect all as specified and as directedby engineer-in-charge. 25 tv & telesupply and fix pvc conduit 25 mm diaconcealed in wall all as specified and directed by engineer in charge . 26 material and labour for tvwiringwith rg-6 solid copper coaxial audio and video cable for tv antenna, satellite, dvr devices, safe for using in door and out door and drawn through pvc conduit upto required length,all as specified and directed by engineer in charge. 27 material and labour for telephonewiringwith 0.4mm pvc telephone switchboardcablefor telephone , safe for using in door and out door and drawn through pvc conduit upto required length, all as specified and directed by engineer in charge. 28 supply and fix telephone distribution box ,junction box with krone module for multiple connection, all as specified and directed by engineer- in- charge. 29 external water supplymaterial and labour for drilling and tapping gi/ci water mains (in position) for branch connection of 150/100mm including all fittings such as bend, elbows, tees, reducers and unions etc all as directed by engineer in charge. 30 supply and fix brass-metal, 100 mm diaglobe gate valves, with iron wheel head, screwed both ends for iron pipe all as specified and directed by engineer in charge 31 material and labour for construction of brick masonary valve chamber of size 900mm x 900mm x 600mm internal size including necessary earth work excavation, pcc 1:4:8 type d2 for foundation, brick work in cement mortar 1:4, pcc 1:2:4 type b1 for coping, 15mm thick rendering in cement mortar 1:4 including provision of mild steel cover 3mm thick on 40 x 40 x6 mm angle iron frame work with 2 coats of synthetic enamel paint over a coat of zinc chrome primer and locking arrangements complete all as specified and as directed. 32 material and labour for construction of brick masonary valve chamber of size 600x600x600mm internal size including necessary earth work excavation, pcc 1:4:8 type d2 for foundation, brick work in cement mortar 1:4, pcc 1:2:4 type b1 for coping, 15mm thick rendering in cement mortar 1:4 including provision of mild steel cover 3mm thick on 40 x 40 x6mm angle iron frame work with 2 coats of synthetic enamel paint over a coat of zinc chrome primer and locking arrangements complete all as specified and as directed. 33 external electric supplymaterial and labour for cutting road / hard standing to depth not exceeding 60 cm and to width not exceeding 45 cm for laying hdpe pipes and making good the disturbed surfacesby 1:3:6 type c1 using 20 mm graded stone aggregate complete all as specified and as directed. 34 supply, install, testing and commissioning of cpri approved lt panel outdoor type of size 1.5x1.2x0.60 mtr suitable size recommended by manufacturercubical floor mounted type (ip-65 degree of protection ) made out of 3 mm thick ms sheet duly painted with two coats of synthetic enamel paint powder coated, bus bar 200 amps rating made of aluminium strip (40x5mm) duly drilled holes for connections and mounted on epoxy based post insulatorsfor 3 phase 4 wire 415 volts 50 hz ac supply ,hibling , cable entry boxes , cable gland incl 50x50x6 mm frame (bottom portion of the panel), grouted by using foundation 1:2:4 type c1 with 20 mm graded stone aggregates totally tested as per iec 61439-i with the following accessories. 35 incomingmccb 125 amps 25 ka adjustable type 4 pole -01 no@ as in/comingoutgoing(i) mccb 63 amps 25 ka adjustable type 4 pole -03 nos@ as out/going (working-02 , spare-01)(ii) mcb 32 ampstpnamps adjustable type as per - 03 nos@ as out /going(working-02 , spare-01)(iii)multifunctional digital type timer switch230v 50 hz, single phase40amps cap with bay pass system including power cotactor suitable 40 amp mcb 40amps toggle switch cut out of40amps. (iv) powercontactor for rex timer switch 4 pole 40 amps -01 no(v)multifunctional digital type adwancedthree phase meter volt/amp/kva/kw/ +/- 1.0% rated current, auto and manual scrooling,site selectable ct/pt ratios 80/5 etc.housing in ms sheet 1.6 mm thick duly painted with enameled paint over a coat of primer complete in all respect all as directed & specified(vi) phase indicators led type set of 3 - r,y,b -o1 setnote :- foundationfor fixing of lt/feeder pillerboard in ground floor pcc (1:4:8) type b-1 using 20mm graded stone aggregate, measured and paid separately 36 supply and fix smc loop in loop out pvc water proofjunction box of internal size 200 x 140 x 95 mmincluding mcb 6 amps,b class ,connector necessary ms clamps, nuts & bolts with washers etc required at site all as specified and as directed. 37 material and labour for pvc insulated, pvc round sheathed multicore industrial cable of size 3 core,1.5 sqmmfor voltage grade upto 1100 v, as per is 694 all as specified and directed by engineer in charge. 38 returning and filling in two parts (i) using riddled soil obtain from excavated soil upto depth of 30 cm (8 cm below cable and remaining above cable) for cushioning of cable and (ii) refilling the trench of remaining depth with normal excavated soil all as specified and directed. note:- excavated soil shall be riddled by using sieve to separate composite particles etc as per is 1255 1983 and refilling in trenches as in cable cushioning. 39 supply and fix gi bracket made out of light grade pipe of size 40 mm dia 1.2 mtr long bent to shape including ms clamp of suitable size nut bolt washer for fixed along the wall/pcc pole with ms clamp etc complete all as specified and as directed. 40 supply and fix mccb 3 pole, 415 v, adjustable type, 125 amps with breaking capacity 25 ka, at existing lt panel and making good connectionwith nut bolts and washers and wire connections etc. to be fixed in theexisting tr panel complete all as specified and as directed. 41 m & l for earthing complete with gi earth plate electrode 60 cm x 60 cm x 6 cm thick buried directly in ground vertically at a depth not less than 2.25 m belownormal ground level with top level of earth plate at depth not less than 1.5 m below normal ground level surrounded form all sides by 15 cm thick and packed layer of charcoal dust and common salt filling in alternate layers and electrode connection by using 25x4mm gi stripby means of bolts, nuts, check nuts and washers of galvanized iron upto test pointand protected by gi pipe light grade 40 mm bore up to 7.5 mtr connected to a main switch board or main control board and gi pipe light grade 20 mm bore for watering and including funnel, wire mesh, 80 mm thick pre-cast rcc 1:2:4, type b-1 cover reinforced with hard drawn steel wire fabric weighing not less than 4 kg/sqm in lieu of ci cover, pcc 1:3:6 type c2 pit / chamber including all necessary excavation and earth work, disposal of surplus soil to a distance not exceeding 50 m all as specified and as shown in electrical plate no3 of mes schedule part – i of 2009.

State Government

TRN :49061070 | 15 May, 2025

Tender Value : 1.56 Lacs

Maintenance - Uttar Pradesh

Tender for tender for rectification of scada system at 220 kv s/s bah on urgent basis under etd-iii, agra - inspection and rectification of ge alstom make substation automation system installed at 220 kv s/s bah. the following works are including for healthy scada communication.(a) replacing the defective armourd optical fiber cable and splicing it if required any anywhere in the ring. (b) replacing the defective fo multimod st-st port patch cords. (c) checking & rectifying the healthiness of lius and its communicating ports. (d) checking and rectifying the healthiness of iec 61850-7 ethernet switches. (e) replacing the defective cat-5/lan cables and checking its healthiness. (f) rectifying communication healthiness of mod bus rtu for various mfm meters (g) rectification/checking healthiness of gps system and its time synchronisation with all relays. (h) re-installation of old backup to scada. (i) checking the healthiness of all protection relays communication to scada. (j) checking of all required events, alarms, numericals datas, status and signals to scada from various bays & feeders. (k) checking the sld of s/s to scada screen. (l) checking the all required operations of equipments from scada. (m) configuration of ethernet switches/modems/rtu etc. if required. (n) installation of new window and sicam230 software in standby pc, and reinstalling the old backup in hmi-2, making both hmi-1 & hmi-2 in all respect at the time of rectification all required materials and computer parts will be arranged by department without extra charges, except the following given material will be provided by contractor scada license key, activation key, old sad backup and software cd will be provided by department.

State Government

TRN :49061418 | 21 May, 2025

Tender Value : 13.99 Crore

Thane - Maharashtra

Tender for tender for additional 1 x 50 mva, 220/22 kv t/f with 22 kv gis bays (06 feeder bays, 01 t/f lv bay, 01 pt bay & 01 bus coupler / tie bay) & 22 kv ais bus coupler at 220/100/22 kv bapgaon substation under ehv o&m circle, kalwa (transformer will be provided by msetcl)

State Government

TRN :49020608 | 21 May, 2025

Tender Value : 47.67 Lacs

East Godavari - Andhra Pradesh

Tender for providing 132kv bay protection equipments (i.e. cb, cts, isolators protection relays etc.) on the 132kv nidadavole (132kv ss) source feeder 132kv nidadavole (220kv ss) source feeder and also providing one number 132kv bus pt set for protection functions at 132/33kv substation ,kovvuru in nidadavole division, om circle, eluru in east godavari district under rmi scheme

State Government

TRN :49021140 | 28 May, 2025

Tender Value : 6.35 Lacs

Ballia - Uttar Pradesh

Tender for tender for supply and work for 02 nos. 33kv bays for jal jivan mission yojana at 132kv s/s dighar under etd, ballia. - laying and jointing pvc pipe. heading 2 supply-apgclamp suitable for moose to panther 3 pgclamp suitable forpanther to panther 4 phase plate (r,y,b phase ) 5 copper bond 6 led street light limiaire type sl-l19 45w) 7 40mm dia ms electrod of 3 meter length 8 40mm dia ms round bar 9 single tension fitting for acsr panther conductor 10 70 kn disc insulator 11 g.i nut &boltwith washer 16x40 mm 12 g.i nut &boltwith washer 16x45 mm 13 g.i nut &boltwith washer 16x50 mm 14 work -bsorting counting and loading for carriage of substation structure (8.00 mt) from efu naini prayagraj to 132kv s/s dighar 15 carriage of substation structure fromefu naini to 132kv s/s digharapproxdistance (8mt x 330=2640 ) 16 unloading and stacking of g.i structure at 132kv s/s dighar 17 erection of main and auxiliary structure by shifting of structure from store to work siteas per relevant drawing and practices using nut - bolt and spring washers .the material shall be supplied by department free of cost but the contractor has to managet&p and all other associated work to complete the job satisfactory. 18 stringing of 33 kv transfer bus bar ( r, y & b phase ) with acsr single pantherconductor including cutting, bending and clamping fitting of tension clamp with all associated accessories, hoisting of insulator string after shifting of material from store to worksite and all other associated work to complete the work satisfactory. 19 erection of following equipments as per instruction manual of various equipments and technical specification including shifting of material from store to work site includig all other associated work to complete the job satisfactory.30 kv la 20 36 kv ct 21 junction box for 36 kv ct 22 36 kv vcb 23 36 kv bsi 24 36kv lsi 25 33kv tripple feeder control & relay panel 26 dismantling of old tripple feeder panel for proper space for new panel including disconnection ofcontrol cable 27 erection of abt energy metering panel with 2nos abt meter 28 jumpering of equipments using single/double panther/zebra/moose conductor from bus bar to isolators,cb,ct,la, etc 29 laying of follwing size control cables from control & relay panels to various equipment junction boxes etcin switchyard as per cable schedule, its binding at every 1.5 mtr. distance with m.s. saddle including carriage of cable from store to work site and shifting back to store and all associated works to complete the job satisfactorily.2c x 2.5 sq. mm 30 4cx 2.5 sq. mm 31 6cx 2.5 sq. mm 32 termination of above cable as per cable schedule including making necessary holes in gland plates of boxes where ever required including supply and fixing of cable glands of approxinmate size and to provide ferrules and nos. for each core of cable and its termination with all the other associated works to complete the job. 33 delta earthing of 30 kv la consisting of 06 nos 3 meter long electodes its placing inside the ground and connecting all three electrodes with 75x10 mm ms flat and connecting the same with laat two place required including cost of m.s stripexcluding cost of m.s round bar 34 earthing ofmain & auxiliary structure and various type equipments (ct, cb, la, lsi, bsi etc ) by m.s strips by cutting to proper size, digging of earth from ground level to earthmat then proper welding as per drawing and leveling earth. painting of m.s strips of one coat red oxide primer and two coat with green colourand all associated work to complete the job satisfactory . m.s flat will be provided by the contractor.50 x 6 mm 35 25 x 6 mm 36 layingof 40 mm dia. round bar 700 mm below ground level including cutting straightening ,welding painting excavation of earth in trench from back filling after completion of work with all other associated work to complete the job satisfactory ,excluding cost of 40mm dia round bar. 37 fabrication of3 meter long electrode with 40 mmms round bar having 150 mm conical shape and then its piercingvertically inside the ground with top 700 mm below ground level and its welding exluding cost of 40 mm dia. round bar 38 providing and fixing of name plate made of 2mm thick aluminium sheet of 3m hip retro reflective sheeting plkates to be fixed with help of nut and bolts of istalled equipment structure of 400mm*250mm size 39 loading/unloading and carriage of 02nos 36kv vcb with structurefrom 132kv s/s sikandarpur to 132kv s/s dighar including loading at 132kv s/s sikndarpur by crane and unloading at 132kv s/s dighar by crane , men ,t&p, vahicle , crane arranged by contractor at own his cost

State Government

TRN :49023155 | 15 May, 2025

Tender Value : 1.54 Lacs

Navi Mumbai - Maharashtra

Tender for supply, installation, testing &commissioning of amr panels along with allied equipment’s for 01 no. 22kv gis feeder bay for m/s web werks india pvt. ltd. plot no.r-202,ttc midc area rabale navi mumbai emanating from 100/22kv nocil substation

State Government

TRN :49023648 | 15 May, 2025

Tender Value : 1.22 Lacs

Jaisalmer - Rajasthan

Tender for construction of 1x33 kv rsmml feeder bay at 220 kv gss, ramgarh as deposit work of rsmml (rajasthan state mines & minerals ltd.) on labour contract basis.

State Government

TRN :49028581 | 22 May, 2025

Tender Value : 5.63 Lacs

Kolkata - West Bengal

Tender for tender for construction of one 33 kv feeder bay and other allied works at narayanpur 33/11 kv sub-station under bidhannagar-ii division, wbsedcl.

State Government

TRN :34438625 | 20 May, 2025

Tender Value : 0

Raipur - Chhattisgarh

Tender for construction of 08 no. 132kv feeder bays at 220/132kv substation patan on labor contract basis

State Government

TRN :34437115 | 14 May, 2025

Tender Value : 17.73 Lacs

Kolkata - West Bengal

Tender for construction of 02 nos 33kv feeder bay with allied works at nt-aa-cbd substation under newtown division

Related Searched Keywords : feeder bay

List of feeder-bay Tenders

Tender for tender for additional 1 x 50 mva, 220/22 kv t/f with 22 kv gis bays (06 feeder bays, 01 t/f lv bay, 01 pt bay & 01 bus coupler / tie bay) & 22 kv ais bus coupler at 220/100/22 kv bapgaon substation under ehv o&m circle, kalwa (transformer will be provided by msetcl)

Tender for supply, installation, testing &commissioning of amr panels along with allied equipment’s for 01 no. 22kv gis feeder bay for m/s web werks india pvt. ltd. plot no.r-202,ttc midc area rabale navi mumbai emanating from 100/22kv nocil substation

Tender for construction of 1x33 kv rsmml feeder bay at 220 kv gss, ramgarh as deposit work of rsmml (rajasthan state mines & minerals ltd.) on labour contract basis.

Tender for tender for construction of one 33 kv feeder bay and other allied works at narayanpur 33/11 kv sub-station under bidhannagar-ii division, wbsedcl.

Tender for construction of 08 no. 132kv feeder bays at 220/132kv substation patan on labor contract basis

Tender for construction of 02 nos 33kv feeder bay with allied works at nt-aa-cbd substation under newtown division

Get feeder bay Tender Alert...

Related Searched Keywords : feeder bay

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us