Filters

List of exhaust-system Tenders

List of latest exhaust-system Tenders in Indian Tenders. Click on any exhaust-system Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for exhaust-system Tenders.

All-Tenders (33)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :35610881 | 04 Nov, 2025

Tender Value : 0

Porthrapur - Andaman And Nicobar Islands

Tender for gem bids for 25pmuc004, em6290b-0000925105 filter element em6290b-0299976748 sealing ring for set w6 em6290b-5295307212-76 plug-in-board not adjusted em6290b-700429038003 o-ring em6290b-8695860572 gasket kit em6299b-700429024000 o-ring em6290b-8922491damper assly em6290b-0000180729 safety valve em6290b-0002035583-32 rubber bellows em6290b-700429028002 o ring 28x4 em6290b 700429095004 o-ring for set w5 em6290b-700429160000 o ring em6290b-x00012879 fuel filter em6290b-x00e50700032 wiring harness for on-engine sensor em6290b-xp52717300080 ring gear em6299b-5240960680 gasket cyl hd to air intake pipe em6299b-8591840001 paper filter em6299b-ex52421300029 alternator em6299b-x00e50203604-s0002 display unlabelled em6299b-x00e5020903jplug in board lop display em6290b-0001812398 semirotary hand pump em6290b-5249972672 adapter60deg m14x1 5 em6290b-0025313060 relay 24v dc em6290b-0035351731 pressure sensor 15 bar em6290b-206796020000 conical spr washer em6290b-5240780047 adapter em6290b-5261420060flange sealing em6290b-735080010200 rbgulatorfuel retur n 0 5 bar em6290b-drg -41 -839gm scoopgum grating em6290b-x52405500120 cylinder headcover die casting em6290b-x52623100058 rubbermount em6299b-0180943002 air filter em6299b-5260020714 exhaust belows em6299b-x59308300058easychange fuel filter em6290b 735080018200valve check 0 2 bar rhdk 18 l 0 2 em6290b-000-092-02-60 gasket em6290b-000-098-00-33 curve roller em6290b-000-153-64-972 instrument em6290b-000-20102 18 counter ring em6290b-000-538-74-30 bid number gem2025b6674991 dated 13-10-2025 bid document1 63 1 1 soldering iron tid, em6290b-000-538-83-30 solderingiron stand, em6290b-000000003326 hex screw, em6290b-0000640038 piston, em6290b-0005384575screen, em6290b-000n55006 gasket, em6290b-000n55051gasket, em6290b-111a27002 1ring sealing, em6290b-111g017021 fuel filter, em6290b-111k74701 1spring leg, em6290b-111m07001 1 banjo plug, em6290b-121 h04033 gasket, em6290b-136-a19-0022gasket crankcase, em6290b-5105384575-s0005display dis 10-015105381275 s0004, em6290b-550-142-15-20 gasket, em6290b-5605892099-23 wt05-solution, em6290b-635-h22-706 2 microswitch, em6290b-635m22706d1 limit switch clutch position auto, em6290b-700429021001 o-ring, em6290b-705057013000 ring sealing a13 x18 cu, em6290b-8691840031 cover fixing kit, em6290b-915013040002union, em6290b-x00017222-76 plug in board mpu 30-02, em6290b-x00e50201330 track ball, em6290b-x00e50205983 tester, em6290b-xp52499100226 v-bandclamp, em6299b-23540304 kit o ring centrifugalfilter, em6299b-700368042004 rubber sleeve, em6299b-ex59407500029 injector, em6299b-x59414500018 exhaust pipe bellows, em6290b5272001101 sea water pump, em6290b-0002035283-87rubber bellows, em6290b-000-159-21-79 terminal, em6290b-000472042000 snap ring 42x1 75 din 472, em6290b-0005362539 digital multimeter fluke 87, em6290b-5295309312 plug in board aibi-02, em6290b-x00e50207213 pressure sensor, em6299b-x59499100111 o-ring, em6299b-xp52800600016 repairkit, em6299b-700429070002 o-ring, em6299b-700429185002 o-ring, em6299b-700429253000 o-ringprofile gasket, em6290b-5265309612 plug-inboard, em6290b-5265300813-76 plug in board dfc 201, em6290b-5265300483-76 modular system gcm 1-025265300483, em6290b-5275307654-76 electronicgovernor ecu4, em6299b-x59308300031 fuel filterspin on, em6299b-x59420200234 restrictor, em6299b-x59420200235 restrictor, em6299b-x59499100112 o-ringem6290b-0000925105 filter element, em6290b-0299976748 sealing ring for set w6, em6290b-5295307212-76 plug-in-board not adjusted, em6290b-700429038003 o-ring, em6290b-8695860572 gasket kit, em6299b-700429024000 o-ring, em6290b-8922491damper assly, em6290b-0000180729 safety valve, em6290b-0002035583-32 rubber bellows, em6290b-700429028002 o ring 28x4, em6290b 700429095004 o-ring for set w5, em6290b-700429160000 o ring, em6290b-x00012879 fuel filter, em6290b-x00e50700032 wiring harness for on-engine sensor, em6290b-xp52717300080 ring gear, em6299b-5240960680 gasket cyl hd to air intake pipe, em6299b-8591840001 paper filter, em6299b-ex52421300029 alternator, em6299b-x00e50203604-s0002 display unlabelled, em6299b-x00e5020903jplug in board lop display, em6290b-0001812398 semirotary hand pump, em6290b-5249972672 adapter60deg m14x1 5, em6290b-0025313060 relay 24v dc, em6290b-0035351731 pressure sensor 15 bar, em6290b-206796020000 conical spr washer, em6290b-5240780047 adapter, em6290b-5261420060 flangesealing, em6290b-73^080010200 rbgulator fuelretur n 0 5 bar, em6290b-drg 41 839gm scoop gumgrating, em6290b-x52405500120 cylinder head cover //bid details2 / 63

Central Government/Public Sector

TRN :35612721 | 04 Nov, 2025

Tender Value : 0

Kolkata - West Bengal

Tender for gem bids for supply, support work table with 2 bottom shelves, chapatihot plate with puffer, double burner rangewithout bottom shelf low height, work table with2 bottom shelves, single sink unit, single burnerrange without bottom shelf low height, pot rack4 shelves, storage rack 5 shelves, ss hood with ssfilter part wise, gi ducting for hot air, heavy dutyindustrial exhaust fan 18inch dia for hot air, pulverizer gravy machine, vegetable cuttingmachine, dirty dish soil dish landing table, garbage can, pre wash table with sink, clean dishrack 5 shelves, 6 container hot bain marie tabletop, gas manifold system, half inch ss lpg pipe linewith fittings

Central Government/Public Sector

TRN :35606896 | 31 Oct, 2025

Tender Value : 0

Mumbai - Maharashtra

Tender for gem bids for repair, maintenance, and installation of plant/systems/equipments version 2 - manufacturing unit;biennial rate repairing of casing of bucket elevator, exhausters & furnace shell 6 mm thick, cs plate insuphala plant at rcf, trombay unit; as per.. /

corporations/Associations/Others

TRN :35595659 | 25 Oct, 2025

Tender Value : 0

Yavatmal - Maharashtra

Tender for gem bids for the proximity suit, chemical suit, b.a. set with cylinder, portable fire pump, emergency lighting system, rechargeable torch, smoke exhauster, hose 38 mm, concrete cutter, chain saw cutter, pole pruner, safetybelt, colling vest, rescue stretcher

Central Government And Public Sector

TRN :35599794 | 31 Oct, 2025

Tender Value : 17.99 Lacs

Bhavnagar - Gujarat

Tender for gem bids for point wiring group c , wiring with 2c 4sq mm cu wire in pvc conduit with earthing , wiring with 4c 4sq mm cu wire in pvc conduit with earthing , wiring for sub main 2c 1.5 sq mm cu wire with earthing , wiring for sub main 2c 4 sq mm cu wire with earthing , wiring for sub main 4c 4 sq mm cu wire with earthing , s drawing 1c 1.5 sq mm cu wire in extg conduit , s drawing 2c 1.5 sq mm cu wire in extg conduit , s drawing 3c 1.5 sq mm cu wire in extg conduit , s drawing 4c 1.5 sq mm cu wire in extg conduit , s drawing 6c 1.5 sq mm cu wire in extg conduit , s fixing 20 mm medium pvc conduit , s fixing 25 mm medium pvc conduit , s fixing modular switch 5 or 6 amp , s fixing modular switch 5 or 6 amp 2way , s fixing modular switch 15 or 16 amp , s fixing modular 5 or 6 amp socket outlet , s fixing modular 15 or 16 amp socket outlet , s fixing bell push modular , s fixing modular blanking plate , s fixing metal box with lamnated sheet cover 1 or 2 module , s fixing metal box with lamnated sheet cover 3 module , s fixing metal box with lamnated sheet cover 4 module , s fixing metal box with lamnated sheet cover 6 module , s fixing metal box with lamnated sheet cover 8 module , s fixing metal box with lamnated sheet cover 12 module , s fixing metal box 100 x 100 x 60 mm , s fixing metal box 150 x 75 x 60 mm , s fixing metal box 180 x 100 x 60 mm , s fixing box with 3 no 5 or 6 a modular switch and sockets , s fixing box with 1 no 15 or 16 a modular switch and sockets , s fixing call bell buzzer 230 v ac , itc of prewired light fitting incl wiring , itc of ceiling fan incl wiring , s fixing 4 way double door mcb db 415v , s fixing 2 and 4 or 6 way double door mcb db 240v , s fixing single pole 5 to 32 amp mcb , s fixing single pole and neutral 5 to 32 amp mcb , s fixing 40 amp dp mcb , s fixing 63 amp triple pole and neutral mcb , s fixing 25 to 32 amp dp mcb with db , s fixing ms perforated poweder coated painted cable tray 150mm x 50 mm x 1.6mm , s fixing ms perforated poweder coated painted cable tray 300mm x 50 mm x 1.6mm , s fixing led 2x2 feet 18w , s fixing led 2x2 feet 36w , sitc bldc celing fan 1200 mm , sitc bldc celing fan 1400 mm , s fixing 2 step electronic fan regulator , s fixing metallic wall mounted air circulator fan , sitc furface mounted led battern light aluminium body 36w , laying on wall upto3.5c 35 sq mm cable , s and lay alcond cable 2c 6 sqmm xlpe , s and lay alcond cable 4c 6 sqmm xlpe , s and lay alcond cable 4c 10 sqmm xlpe , s fixing brass battern holder , s f computer spike guard 4 no outlet , s f 20 mm size pvc casing capping , s f pvc exhaust fan 200 mm to 300 mm 1 phase , s f metal body exhaust fan 200 mm to 300 mm 1 phase , sitc led streetlight fitting 30w al body , s f pvc box with 20a spn and timer , s f ms adopter box , sf ms angle iron frame structure incl cutting welding etc , sitc indoor power paned with 200a tpn sfu and 200a fp onload changeover as incomer etc , itc of 1.5 or 2 tr split ac units , sf add copper pipe with cable for sac , s f powder coated iron stannd of ac outdoor unit , sf 3 c 2.5 sq mm cu cond flexible cable , sf25 mm pvc isi drain pipe , earthing with 600x600x6mm gi earth plate , pf 25x5 mm gi earth strip in 40mm gi pipe , pf 25x5 mm gi earth strip on surface , pf 6 swg gi wire , sitc heat detector for fda system , sitc smoke detector for fda system , sitc manual call box for fda system , sitc response indicatorfor fda system , sitc alarm sounder for fda system , sitc of sector paned of fda system 4 zone , sitc of sector paned of fda system 6 zone , s laying 2c 1.5sq mm fire alarm armoured cu conductor

Central Government/Public Sector

TRN :35582359 | 29 Oct, 2025

Tender Value : 49.67 Lacs

Gurgaon - Haryana

Tender for repair and maint of geyser ceiling fan exhaust fan and electric meter incl misc items at afssr gurgaon/ repair and maint of fire fighting system at nts map accn and comprehensive maint of the fire alarm system wld system fm-200 and vesda system and

Central Government/Public Sector

TRN :35570022 | 29 Oct, 2025

Tender Value : 0

New Delhi - Delhi

Tender for gem bids for dg, 250 kva dg set with exhaust system, amf control panel, lt power cable outdoor 3 and half core 300 sq mm, ltcable indoor 3 and half core 400 sq mm al, control cable, cable laying trenching, hdd, earthing gi chemical pipepits, civil works pcc foundation, pre-commissioning testsdocs, buyback of old 65 kva dg set

Central Government/Public Sector

TRN :35555325 | 20 Nov, 2025

Tender Value : 0

Multi Location - Multi State

Tender for supply of emergency exhaust valve 1 1/4 for e-70 brake/ccb system.

State Government

TRN :35558127 | 16 Oct, 2025

Tender Value : 7.36 Lacs

Jaipur - Rajasthan

Tender for "earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils " p.c.c. in foundation providing and laying in position cement concrete including curing compaction etc. complete in spcified grade excluding the cost of centering and shuttering all work upto plinth level 1:4:8(1 cement:4 coarse sand :8 gradeed stone aggregate 40 mm nominal size). random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in cement mortat 1:6 (1-cement: 6- sand) dpc:-providing and laying in position specified grade of cement concrete for all rcc structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required excluding the cost of centering, shuttering and reinforcement . m20 grade nominal mix/design mix. stone masonry in super structurerandom rubble stone masonry with hard stone in superstucture above plinth level and upto five level wall upto 30 cm and less thickness cement sand mortar 1:6 (1-cement: 6- sand) pillar masonary:-random rubble stone masonry with hard stone in superstucture above plinth level and upto five level for square or rectangular pillers cement sand mortar 1:4 (1-cement: 4- sand) supplying and fixing stone lintels/bed plates of approved quarry rough dressed in cement mortar 1:4 :upto 15 cm. thick. " beams:-providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc. m20 grade nominal mix / design mix" centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc. steel reinforcement:-p/f reinforcement for rcc work including straightening,cutting, bending, placing in position and binding (including cost of binding wire) all complete upto floor five levetmt bars (conforming of relevent is code). door frames:-providing and fixing in cm 1 : 4 double paitam (rebated) stone door window and ventilator frames of approved quarry :size 100 x 75mm. doors:-providing and fixing m.s. sheet 1mm thick double leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint glazed window:providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required :partly fixed and partly openable [ fixed area not to exceed 33%] wire gauge supplying & fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. guard bars: p&f square bars or other flat welded to window/ventilators etc., guard bar 12 x12mm supplying and filling in plinth with sandy soil free from deleterious and organic material under floors including watering ramming consolidating and dressing complete including cost of sandy soil with all lead and lift. stone kharanja: rr dry stone kharanja under floor kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete(for area of each slab upto 2001 sqcm) plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished : 20 mm thick plaster(ceiling): 6 mm thick cement plaster to ceiling of mix 1:3 (1 cement: 3 fine sand) black board : plaster on new surface on wall in cement sand mortar 1:3 including raking of joints etc. complete fine finish: 12mm thick grading roof for water proofing treatment with water proffing compound: cement concrete 1: 2: 4 (1 cement: 2 course sand: 4 greded stone aggregate 20 mm nominal size) gola providing gola 75mm x 75mm in cement concrete 1:2:4(1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge) including finished with cement mortar 1:3(1 cement: 2 fine sand) as per standard design. "distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding: new work (two or more coats) over and including scrapping and priming coat with cement primer." exterior finishing: painting exterior surface of wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including sand papering, prime coat, making smooth surface with cement based putty etc complete in all respect: new work panting on doors & windows :- painting with syntheitic enamel paint of approved brand and manufacture in all shade to give an even shade new steel work (2 or more coat on new work). copping: cement concrete flooring 1:2:4 (1 cement: 2 course sand: 4 greded stone aggregate) finishing with a floating coat of neat cement including cement slurry, making of lines or groove etc. complete but excluding the cost of nosing of steps etc. complete : 40mm thick with 20mm thick nominal size aggregate. making grooves as per design in plaster 10mm to 20mm wide. making of drip course (tapka) in cement sand mortar 1:6 width upto 40 mm and 10 mm thick as per approved design providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete p&f rigid pvc pipe (is:4985 mark) class ii/ (4 kg. /cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 110mm dia wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of 240/415 v ac mcb with positive isolation of breaking capacity not less than 10 ka (b/ c tripping characteristic as per type of load and site requirement) 4kv impulse withstand voltage, as per pwd specification for electrical works with isi marked is 8828(1996) / conforming to iec 60898-1 2002, iec 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per iec, minimum phase termination capacity of 35sq.mm. , conductorline load reversibility, label holding facility , ip 20 contact protection and fitted with existing distribution board/sheets, min. operation 20,000 upto 32 a rating and 10,000 upto 63 a, 5000 for 80 a rating including making connections, testing etc. as required. . oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .6a to 32a rating. providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed un-arrmoured aluminium cable confirming to is:1554 p-i / is :7098 p - i of 1.1 kv with h4- grade electrolytic aluminium conductor confirming to is 8130 of purity >99.6 %, inner / outer sheath confirming to is:5831 in existing rcc / hume / stoneware / pvc pipe/ open duct/cable trench / cable tray (with cable tie) including testing etc. as required of following size. oem must have it's own in house nabl accrediated laboratory for testing procedure as per is:10810. for additional technical parameters of product / work refer annexure 'a' attached with this bsr 6.0 sq. mm 4 core providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating p & f isi marked (is:3854) 6 amp. flush type non modular switch with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material including cutting hole in tile and making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of of 3/5 pin 6 amp. flush type non modular socket made out from industrial grade polycarbonate or fire resistant abs material, brass terminal with porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .

Central Government / Public Sector

TRN :35558794 | 16 Oct, 2025

Tender Value : 0

Bangalore - Karnataka

Tender for gem bids for fume exhaust system with scrubber or fume hood withscrubber q3 pac only

Related Searched Keywords : exhaust system

List of exhaust-system Tenders

Tender for gem bids for repair, maintenance, and installation of plant/systems/equipments version 2 - manufacturing unit;biennial rate repairing of casing of bucket elevator, exhausters & furnace shell 6 mm thick, cs plate insuphala plant at rcf, trombay unit; as per.. /

Tender for gem bids for the proximity suit, chemical suit, b.a. set with cylinder, portable fire pump, emergency lighting system, rechargeable torch, smoke exhauster, hose 38 mm, concrete cutter, chain saw cutter, pole pruner, safetybelt, colling vest, rescue stretcher

Tender for repair and maint of geyser ceiling fan exhaust fan and electric meter incl misc items at afssr gurgaon/ repair and maint of fire fighting system at nts map accn and comprehensive maint of the fire alarm system wld system fm-200 and vesda system and

Tender for supply of emergency exhaust valve 1 1/4 for e-70 brake/ccb system.

Tender for gem bids for fume exhaust system with scrubber or fume hood withscrubber q3 pac only

Get exhaust system Tender Alert...

Related Searched Keywords : exhaust system

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us