Filters

List of epoxy grouting Tenders

List of latest epoxy grouting Tenders in Indian Tenders. Click on any epoxy grouting Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for epoxy grouting Tenders.

All-Tenders (19)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Local Bodies

TRN :48606691 | 15 May, 2025

Tender Value : 56.65 Crore

Prayagraj - Uttar Pradesh

Tender for tender for kareli - nurulla road to askari market road block c and block d housing scheme and nurulla road from mahavir chauraha to karamat ki chowki near sasur khedari river and also till the connecting road - clearing grass and removal of rubbish upto a distance of 30 m outside the periphery of the area as per technical specification clause 201. 3 dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 60 metres as per instructions of e-i-c. (by mechanical means). 4 i) cement concrete 5 ii) reinforced cement concrete/ r.b. 6 dismantling of flexible pavements and disposal of dismantled material up to a lead of 100 m, stacking serviceable and unserviceable materials separately as per technical specification clause 202. bituminous / granular courses (by mechanical means) 7 dismantling of road gully chamber of various sizes including c.i. grating with frame including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including refilling the excavated gap. 8 removing all type of hume pipes and stacking within a lead of 1000 metres including t&p, earthwork and dismantling of masonry works. 9 (i) up to 600 mm dia 10 removal of telephone / electric poles / street light / lamp post including excavation and dismantling of foundation concrete and lines under the supervision of concerned department, disposal with all lifts and up to a lead of 1000 metres and stacking the serviceable and unserviceable material separately 11 disposal of moorum/building rubbish malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of engineer-in-charge. note- item to be applicable in urban areas having directions for restricted hours for movement/ plying of load carrying motor vehicle of 3.5 cum or more. 12 dewatering using 10hp to 70hp diesel engine pump set including hire charges, cost of diesel, engine oil, pump operator, labor charges, conveyance of pump set and fuel to site and back, loading, unloading and any other incidental charges etc., complete. (hire charges for diesel pump set for 10 hp) 13 [b] bill no. 2 - earthworks 14 excavation for road work in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and leading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections and transporting to the embankment location within all lifts and lead upto 1000m 15 removal of unserviceable soil including excavation loading and disposal but excluding replacement by suitable soil which shall be paid separately as per clause 305 16 i) lead upto 1000 m 17 ii) lead upto 8000 m 18 earth work in excavation of foundation of structures as per drawing and technical specification, including setting out construction of shoring and bracing, removal of stumps and other deleterious matter dressing of sides and bottom, backfilling the excavation earth to the extent required and utilizing the remaining earth locally for road work. 19 mechanical means (depth upto 1.5 m) 20 i) excavation 21 filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. 22 [c] bill no. 3 - development of carriageway 23 stabilization of in-situ (existing pavement crust) or soil or otherwise sub base/ base course up to the required depth by cold in-situ recycling using cement and chemical additives / otherwise: providing pulverizing, spreading, milling and mixing of chemical additives at the appropriate rate as per job mix design in accordance with irc-sp-72-2015 , irc-37-2012 & 2018 and irc sp 89 (part ii) 2018. cementitious additive @ rate of minimum 5 - 7% and ccs/cs additive should be spread on the existing pavement using a mobile truck mounted containerized cement/ additive spreader with micro processor controlled weighing and spreading system. the additive spreader shall have variable working width sufficient to cover whole pavement lane. the in-situ stabilization process shall be carried out by a mobile and self propelled stabilizer / reclaimer of working width of 2.4 m and with minimum engine horse power of 440 kw with a variable working depth up to 50 cm. the resultant stabilized mix then would be profiled to the required grade, level and thickness using motor grader and the mix would be compacted using 20 tonne pad foot roller in combination with smooth wheel roller to achieve desired proctor density as per irc 37-2012 & 2018 and complete in all respect and curing with water as required including all materials, labour and machinery etc. the entire in-situ process would be carried out in single pass with milling and pulverising of damaged asphalt pavement / soil/ aggregates / soil-aggregate mixture to the desired depth and with simultaneous addition of additives and water with machine integrated spray bars fited on the wheeled self-propelled and vibratory pad foot roller to achieve the desired proctor density in all respects. the tandem roller be followed by pneumatic tyre roller. the minimum unconfined compressive strength (ucs) of stabilized sub base/ base should be 4.5 to 7 mpa after 7 / 28 days of curing as per irc-sp- 72-2015 , irc-37-2012 & 2018 . also durability aspects (wet-dry cycles) of stabilized sub base should be satisfied as per irc 37-2012 & 2018 and irc sp 89 (part ii) 2018. the gradation mixes and materials should be as per irc 37-2012 & 2018 and irc sp 89 (part ii) 2018. the train of equipments to be used are binder spreader- water tanker- additive truck- recycler- padfoot roller (20 tonne) + single drum compactor- grader- tandom roller- pneumatic tyreroller (20 tonne) 24 sami layerproviding and laying stress absorbing membrane interlayer (sami)/bitumen impregnated geotextile layer after clearing of the road surface geotextile conforming to physical requirements of claues 703-3, laid over a tack coat of paving grade bitumen 80- 100 penetration, laid at the rate of 1.05 kg per sqm over thoroughly cleaned and repaired surface to provide a water resistance membrane and crack retarding layer paving fabric to be free of wrinkling and folding and to be laid before cooling of tack coat, brooming and rolling of surface with pneumatic roller to maximise paving fabric contact with pavement surface. 25 providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 to 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. (tack coat on bituminous surfaces ) 26 providing and laying 40mmthickbitumencarpete(b.c.) with 100-120 tph hot mix plant producing and average output of 75 tonege par hour using crushed aggregates of specified grading premixed with bitumen binder(vg-30) @ 5.40% of mix as per most specification clause. etc all comp of work. 27 providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from aggregat aggregate natural sources, portland pozzolana/ordinary portland/portland slag cement, admixtures in recommended proportions as per is: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads as per direction of the engineer-in-charge; for the following grades of concrete.note: extra cement up to 10% of the minimum specified cement content in design mix shall. be payable separately. in case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. 28 m.s. (tor steel or plain) in plain work such as rcc or rb work including binding for proper shape and including supply of steel and its wastage bend, hooks and authorized overlapping shall be measured and including cost of binding wire. excluding gst (sor-504). 29 [d] bill no. 4 - pedestrian infrastructure (footpath) 30 sand filling in foundation trenches as per drawing & technical specification and as per direction of engineer-in-charge. (including beneath all paver blocks, cobble areas for levelling purpose, etc.) 31 plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. (pcc below all paving area, kerb channel, road edge kerb, table top, property edge beam) 32 construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at omc, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 (by mix in place method) 33 i) for grading-i material 34 plain/reinforced cement concrete in open foundation complete as per drawing and technical specifications, pcc grade m30using batching plant transit mixer & manual placing(80 mm thickness) r & manual placingand giving broom finish. (pcc with broom finish thickness 80 mm) 35 providing and laying 75mm thick m-30 grade batch mix cement concrete and applying stamping finish to the top surface of freshly laid plain/ reinforced cement concrete of specified grade in porticos, sidewalks, driveways, pool decks and open yards as per direction of the engineer-in-charge. the process shall include the following:-the concrete shall be placed and screeded to the finished grade, and floated to a uniform surface by using standard finishing techniques. the approved color hardener @ 2.7 kg/sqm shall be applied evenly to the surface of the fresh concrete by the dry shake method by sprinkling in two or more shakes, floated after each shake and trowelled only after the final floating. the approved release agent @ 0.113 kg/sqm shall be applied evenly to the trowelled surface before stamping or the said release agent can be applied to the flexible polyurethane stamp moulds of approved design and in required sizes to achieve final stamped pattern. these stampings shall be placed on the surface of concrete in three to four pieces at a time and tapped gently with rammers of sufficient size & weight to leave proper stamp marks and the process repeated for the remaining concrete surface till the hole surface to be stamped is completed within the time while concrete is in plastic stage of setting.after stamping, the curing shall be done as per manufactures specifications. after initial curing the imprinted joints shall be grouted using cement slurry mixed with color hardener as per theequirement. the surface shall be sealed by applying acrylic based sealer not less than 0.167 litre/sqm.on finished surface.the construction joints shall be provided by groove cutting of size 4mm x 20mm in panel size 3m x 3 m or lesser as per the site conditions and filling the same with 10 mm baker rod and providing and laying (pu) polyurethane based joint sealer of approved make as per manufacturer’s specifications and finished by applying polyurethane resin based top protective clear coat of minimum 80 micron applied with rollers on properly cured and dry clean surface. (cost of concrete for flooring is not included in this item which shall be paid separately.) 36 80 mm thick c.c. paver block of m-35 grade with approved color design and pattern. 37 supply and fixing of tactile indicators made from ss-304 grade stainless steel. warning tactile indicator shall be installed on the walking surface in a raised grid pattern of dots or stud. minimum 36 studs to be placed in 300x300 mm area. dimensions - 35mm outer dia x25mm inner dia, stem dia 8mmx12mm, weight - 28grm.all the indicator will be installed into correctly drilled holes and place any suitable adhesive, all the indicators shall be aligned property, all complete as per direction of engineer-in-charge. 38 supply & fixing of tactile indicators made from ss-304 grade stainless steel. directorial tactile indicator shall be installed on walking surface, consisting of a series of raised bar/strip. min 4 bars/strip to be placed in direction perpendicular to distance of travel in 300x300 mm area. dimensions-280mm l x 35mm w x 4.5mm, stem dia 8mmx12mm, weight - 250grm all the indicator will be installed into correctly drilled holes and place any suitable adhesive, all the indicators shall be aligned property., all complete as per direction of engineer-in-charge. 39 providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8 mm having with water absorption less than 0.5% and conforming to is : 15622 of approved make in all colors and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of engineer-in-charge 40 chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). (dsr-11.20) 41 providing, laying and making kerb channel 30 cm wide and 50 mm thick with cement concrete 1:3:6 (1 cement: 3 coarse sand:6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth etc. complete and as per direction of engineer-in-charge. (saucer drain along the road edge, curved kerbs at property entry/exit, curved kerbs at side roads) 42 providing and laying at or near ground level factory made kerb stone of m-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of engineer-in-charge (length of finished kerb edging shall be measured for payment). (precast c.c. kerb stone shall be approved by engineer-in-charge). 43 cc grade m20 using batching plant transit mixer & manual placing all complete as per direction of e-i-c. 44 [e] bill no. 5 -parking 45 construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at omc, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 (by mix in place method) 46 i) for grading-i material 47 supplying and filling in plinth with sand under floors/in trenches, including watering, ramming, consolidating and dressing all complete with material (from source to site), labor and t&p etc. required for proper completion of the work. (including royalty). 48 plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days and giving broom finish. (pcc) 49 providing and laying factory made chamfered edge cement concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using pu mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of engineer-in-charge.80 mm thick c.c. paver block of m-35 grade with approved color design and pattern. 50 [f] bill no. 6 -cycle track 51 nil 52 [g] bill no. 7 - traffic signs, markings and other road appurtenances 53 providing and erecting 2.00 metre high temporary barricading at site; each panel of size 2.50mx2.00m made of 40x40x6mm angle iron or 50x50x3mm hollow ms tube posts/horizontal members/bracings covered with 1.63mm thick ms sheet. the sheet shall be fixed with 30x5mm ms flat by suitable welding/riveting. the panels shall be made so that gap of 50cm above the ground is available making overall height as 2.5m. ms channel islc 75 @ 5.70 kg/m, 50cm long shall be provided at the bottom having oval shaped holes of size 50x25mm at both ends with 50cm long ms angle 40x40x6mm bracing. suitable arrangement shall be made to fix the barricading to avoid from overturning by providing 250mm long expansion fasteners at both ends. the work shall be executed as per drawing/direction of engineer-in-charge which includes writing and painting, arrangement for traffic diversion such as traffic signals during construction at site for day and night, glow lamps, reflective signs, marking, flags, caution tape as directed by the engineer-in-charge. the barricading provided shall be retained in position at site continuously i/c shifting of barricading from one location to another location as many times as required during the execution of the entire work till its completion. rate include its maintenance for damages, painting, all incidentals, labour materials, equipments and works required to execute the job. the barricading shall not be removed without prior approval of engineer[1]in-charge.(note :- one time payment shall be made for providing barricading from start of work till completion of work i/c shifting. the barricading provided shall remain to be the property of the contractor on completion of the work). 54 reflective raised pavement markers (cat eye/ road stud) supply and fixing of raised pavement marker with made of plastic body of rpm/ road stud shall be moulded from asa (acrylic styrene acrylonitrile) or hips (high-impact polystyrene) or acrylonitrile butadiene styrene (abs) or any other suitable material approved by the engineer. the marker shall support a load of 13,635 kg tested in accordance with astm d4260. the reflective panels shall consist, of number of lenses containing single or dual prismatic cubes capable of providing total internal reflection of the light entering the lens face. lenses shall be moulded of methyl methacrylate conforming to astm d788 of equivalent. the slop or retro-reflecting surface shall preferably ba 5+/.5 degree lo base and the area of each retro -reflecting surface shall not be less than 13.00 $q.cm. the marker height shall not be less than 10 mm and shall not exceed 20 mm & width shall not exceed 130 mm the base of the marker shall be flat within 1.3 mm all road studs shall be legibly marked with the name trade or other means of identification of the manufacture. epoxy installations, excess adhesive around the edge of the marker, excess adhesive on the pavement and adhesive on the exposed surfaces of the markers shall be immediately removed. the contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel , to the engineer . in addition , a two year warranty for satisfactory infield performance of the finished road marker shall also be given by the contractor who carries out the work of fixing of reflective road markers. in case the markers are, displaced , damaged . get worn out or lose their reflectivity compared to stipulated standards , the contractor would be required to replace all such markers within 15 days of the intimation from the engineer , at his own cost. the rate shall include all materials, labor, t&p, transportation, installation and incidentals all complete as per direction of the engineer-in-charge, 55 rpm with shank 56 solar power road marker the solar studs shall be made of aluminum alloy and polycarbonate material which shall be absolutely weather resistant and strong enough to support to load of 13,635 kg tested in accordance with astm d4280. its color may be white, red, yellow, green or blue or combination as directed by the engineer. its water resistance shall meet the requirements of ip 65 in accordance with is: 12063:1987 category 2 for the protection against water ingress. the dimensions of solar studs shall not be less than 100 mm * 100 mm * 10 mm. it shall have super bright leds so as the provide long visibility from a distance of more than 800 m. its flashing rate shall not be less than 1 hz. its should be able to give the prescribed performance in the temperature range of -40 degree c to +55 degree c. its life shall be not less than 3 years. the rate shall include all material, labor, equipments, fabrication, transportation erection, installation and incidentals all complete as per direction of the engineer-in-charge 57 r.cc work (1:1.5:3) (m-20) with cement course sand &20mm the stone grit including all complete cement concrete with cement sand &20mm gauge stone grit with the proportion of (1:1.5:3)including all complete the work (morth ra-12.8 c, case-ii) 58 m.s. or iron work plain or tor for rcc work including cutting, bending, rivetting or welding etc. where necessary. excluding gst (s.i.no-504) 59 painting two coats on new concrete surfaces - painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces 60 m.s. or iron work of heavy sizes section such as trusses, built up gates, record racks, roof work, gates etc. including rivetting or welding where necessary. excluding gst (s.i.no-503) 61 painting of m.s. grill with enamul paint etc all complete work. (s.i. 15.15 new item no.) 62 providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, t&p, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of engineer-in-charge and accordance with applicable specifications. 63 providing and fixing of retro- reflectorized cautionary, mandatory and informatory sign as per irc :67 made of high intensity grade sheeting type-ivvide clause 801.3, 2mm thick aluminum sheeting, 1.5 mm thick supported on mild steel angle iron post 75mm* 75mm 6mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 45cm 45cm60 cm, 60 cm below ground level as per the approved drawing. the retroreflective sheeting shall be tested for a certificate of having the sheeting coefficient of retro reflection, daytime, color and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoors weathering and its having passed these tests shall be obtained from international/ government laboratory/ institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should be also obtained from indian condition within 3 years of launching ofproduct by the manufacturing abroad. alternatively, a certificate conforming to astm specification (d4956-09) on artificial accelerated weathering requirement from a reputed laboratory in india can be accepted provisionally. in such a situation , the employer/client, if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of 3 years outdoor weathering of the sheeting as per irc 67:2012 . legends, letters, numerals, and borders etc. should be as per mort&h specification 801.3.7. proof of the same in form of government reports shall be uploaded while quoting tender. 64 90 cm equilateral triangle with diffinitation plate size (20cm x 60 cm) 65 60 cm equilateral triangle with diffinitation plate size (20cm x 60 cm) 66 60 cm circular with diffinitation plate size (20cm x 60 cm) 67 80mm x 60mm rectangularwith diffinitation plate size (20cm x 60 cm) 68 60 mm x 45 mm rectangularwith diffinitationplate size (20cm x 60 cm) 69 60cm x 60cm square with diffinitation plate size (20cm x 60 cm) 70 90 cm high octagon 71 direction and place identification signs up to 0.90 sqm size board providing and erecting direction and place identification retro-reflectorized sign as per irc-67 made of high intensity grade sheeting the retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime color and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from international/government laboratory/ institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from indian condition within 3 years of launching of product by the manufacture in abroad. alternatively, a certificate conforming to astm specification (d4956-09) on artificial accelerated weathering requirements from a reputed laboratory in india can be accepted provisionally. in such a situation, the employer/ client, if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per irc 67:2012. legends, letters, numerals and borders etc. should be as per mort&h specification no-801.3.7. sheet fixed over aluminum sheeting 2 mm thick with area not exceeding 0.9 sqm. supported on a mild steel single angle iron post 75x75x6 mm firmly fixed to the ground by means of property designed foundation with m-15 grade cement concrete 45x45x60cm., below ground level as per approved drawing, complete. 72 direction and place identification signs with size more than 0.90 sqm size boardproviding and erecting direction and place identification retro-reflectorized sign as per irc-67 made of high intensity grade sheeting the retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime color and luminance, shrinkage, flexibility. liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from international/government laboratory/ institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from indian condition within 3 years of launching of product by the manufacture in abroad. alternatively, a certificate conforming to astm specification (d4956-09) on artificial accelerated weathering requirements from a reputed laboratory in india can be accepted provisionally. in such a situation, the employer/client, if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per irc 67:2012. legends, letters, numerals and borders etc. should be as per mort&h specification no-801.3.7. sheet fixed over aluminum sheeting 2 mm thick with area exceeding 0.9 sqm. supported on a mild steel single angle iron post 75x75x6 mm firmly fixed to the ground by means of property designed foundation with m-15 grade cement concrete 45x45x60 cm below ground level as per approved drawing, complete. 73 providing and erecting overhead signs with a corrosion resistant 2mm thick aluminium alloy sheet reflectorised with high intensity retro-reflective sheeting of encapsulated lense type with vertical and lateral clearance given in clause 802.2 and 802.3 and installed as per clause 802.7 over a designed support system of aluminium alloy or galvanised steel trestles and trusses of sections and type as per structural design requirements and approved plans & as per irc :67 74 brick masonry work in cement mortar 1:4 (1cement: 4 coarse sand) in foundation complete with cement concrete bricks procured from c&d waste recycling plant baswar excluding pointing and plastering, as per drawing and technical specifications. 75 struck pointing with cement mortar consisting of 1 part cement and 2 parts of fine sand of 1.25 finerness modulus.sor 2022 si no574 76 12 mm cement plaster finished with a floating coat of neat cement of mix 1:3 (1 cement :3 sand)and as per direction of engineer in charge. 77 finishing walls with ready mixed premium acrylic emulsion paint (company depot tinted) having volatile organic compound (voc)less than 50 gm/liter and uv resistance as per is 15489:2004, alkali, & fungal resistance, dirt resistance exterior paint of required shade with silicon additive(for painting wall, street furniture) new work (two or more coats applied @1.43 liter/10sqm over and including priming coat of exterior primer applied @ 0.90 liter/10 sqm) 78 supplying and fixing of cast iron antique style bench having weight of sides not less than 72 kg (36 kg each) fitted with fibre rectangle strip (should not be less than 50 mm x 25 mm and 1.6mm thick. length of bench should not be less than 6 ft (end to end of castiron support). 79 [h] bill no. 8 - utility and street light cabling 80 plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.(pcc below pipe of storm water, sewer, water, inspection chamber for storm water, telecom chamber, power chamber and sewer) 81 providing and laying non pressure np-3 class (medium duty) r.c.c. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete (storm water, sewer) 82 600 mm dia rcc pipes 83 providing of 7- way 40mm multi ducts with solid permanently solidly lubricated silicone in inner layer for ict fiber cables conforming to astm f 2160, astm d 2444 and /or equivalent indian standard. external sheathshall be in orange colorand shall be free from visual defects like blisters, shrink holes,flaking, scratches, groove lines & surface roughness. the color of the 7 nos. plb hdpe ducts shall be green, blue, yellow, brown, violet, grey , red for differentiation. outer sheet thicknessshall be 1.2mm +/-0.2mm. the inner surface of the multi channel ducts shall be spirally ribbed & shall be of a configuration for faster installation of cables. wall thickness(mm) of each of the ducts excluding rib height shall be 2.9mm +/- 0.3mm. iso requirements- iso 9001, 14001, 18001, complete as per specifications and directions of engineer-in-charge. (7 way multi utility duct for ofc) 84 supply of hdpe pipe of size 110mm for distribution system conformingn to latest/ relevant i.s. 4984/1995 specifications with all jointing materials and specials conforming to latest /relevant i.s. specifications including f.o.r. destination and all taxes and insurance etc. with loading, unloading and carting up to site of work, also including specials for these pipes and lowering them into the trenches and laying true to alignment and gradient and jointing etc. complete (including testing of pipe lines and cutting of pipes for making up the length but excluding the cost of trenches) all complete as per instructions of engineer-in-charge.110mm dia hdpe pipe pn-6 class pe-100 85 supply of hdpe pipe of size 63mm for distribution system conformingn to latest/ relevant i.s. 4984/1995 specifications with all jointing materials and specials conforming to latest /relevant i.s. specifications including f.o.r. destination and all taxes and insurance etc. with loading, unloading and carting up to site of work, also including specials for these pipes and lowering them into the trenches and laying true to alignment and gradient and jointing etc. complete (including testing of pipe lines and cutting of pipes for making up the length but excluding the cost of trenches) all complete as per instructions of engineer-in-charge.63mm dia hdpe pipe pn-6 class pe-100 86 rcc grade m20 using batching plant transit mixer & manual placing ( side wall, bottom slab for all inspection chamber i.e. storm water, telecom, power, sewer, water) 87 supply and installation on site - recessed double seal ofwith a clear opening of750750 mm di manhole cover and frame(material- ductile iron grade 500/7) of class b125 having minimum load capacity 125 kn load as per en124-2, the top cover( should have 2 no. of keyholes ) as per the design approved by engineer in chargedesign approved by engineer in charge. 88 supply and installation on site - recessed double seal ofwith a clear opening of750750 mm di manhole cover and frame(material- ductile iron grade 500/7) of class d400 having minimum load capacity 400 kn load as per en124-2, the top cover( should have 2 no. of keyholes ) as per the design approved by engineer in chargedesign approved by engineer in charge. (storm water) 89 supply and fixing gully grates red 048 grh – 300 750mm d.i. gully grate & frame in d400 load class , as per bs en 124 black bitumen paint, all complete as per direction of engineer-in-charge. 90 constructing rcc rectangular type manholewith a floating coat of neat cement, foundation concrete 1:6:12mix (1 cement : 6 coarse sand : 12 graded brick bats 40 mm nominal size), and making necessary channel in cement concrete of m-25 grade finished with a floating coat of neat cement, all complete as per standard design and instruction of e-i-c. 91 restoration of water pipeline in case of damage 92 [i] bill no. 9 - horticulture / landscaping works 93 trenching in ordinary soil up to required depth including removal and stacking of serviceable materials and then disposing of as directed and spreading earth & neatly levelling, breaking clods etc. and making the trenched area with designed mounds, paths and sitting spaces etc. to proper levels by filling with earth or earth mixed with manure and properly watering complete work in required topography as per drawing & specifications. 94 supplying and stacking of good earth at site including royalty but including carriage1km (earth measusred in stacks will be reduced by 20% for payment). 95 supplying and stacking at site dump manure from approved source,including carriage up to 1 km (manure measured in stacks will be reduced by8% for payment) 96 mixing earth and manure in specified proportion or as directed. 97 rough dressing the trenched ground including breaking the clods. 98 fine dressing the ground 99 spreading ofmixed good earth and manure in specified proportions as above and in required thickness. 100 uprooting weeds from the trenched area after 10 to 15 days after flooding with water including disposal of uprooted vegetation. 101 providing & laying selection no. 1 grass turf with earth 50mm to 60mm thickness on existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same, as per direction of officer in charge 102 preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of officer-in-charge. 103 excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth,sides of foundation etc. complete. 104 providing and stacking of nauclea cadamba (kadam) of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge. 105 providing and stacking of nyctanthes arbor-tristis (hasingar) of ht. 90-105 cm in earthen pots of size 20 cm as per direction of the officer-in-charge. 106 providing and stacking of terminalia arjuna of height 150-165 cm. in big polybags of size 25 cm as per direction of the officer-in-charge. 107 providing and stacking of plumeria alba dwarf dwarf of height 90-105 cm. with 3-4 branches and thick stem in big size hdpe bags as per direction of the officer-in-charge. 108 providing and stacking of plumeria rubra of height 120-150 cm. with 3-4 branches and thick stem in big size hdpe bags as per direction of the officer-in-charge. 109 providing and stacking of ficus panda of height 90-105 cm. with 10-12 branches and healthy foliage, well formed in cement pots of size 30 cm as per direction of the officer-in-charge.. 110 providing and stacking of ficus reginald well branched, bushy of height 60-75 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge.. 111 providing and stacking of duranta golden, having ht.15 to 20 cm bushtyshape with fresh and healthy leaves in 15 cm size of earthen pot/plastic pot & as per direction of the officer-in-charge.. 112 providing and stacking of tradescantia zebrina having in 15 cm size of earthen pot/plastic pot & as per direction of the officer-in-charge. 113 providing and stacking of wedelia trilobata,full of leaves in 15 cm size ofpoly bags & as per direction of the officer-in-charge. 114 providing and stacking of asparagus sprengeri of height 30 cm to 45 cm, full of leafy branches in 15 cm size of earthen pot / plastic pot & as per direction of the officer-in-charge.. 115 providing and stacking of ophiopogon jaburan ( variegated ), full of variegated leaves in earthen pot/plastic pot of size 20 cm. as per direction of the officer-in-charge. 116 providing and displaying of croton petra bangalore variety having ht. 60 cm to 75 cm with 4 to 6 branches, well developed, fresh and healthy colorful leaves in 25 cm size of earthen pot/plastic pot & as per direction of the officer-in-charge. 117 providing and fixing ms iron tree guard 60 cm dia and 2 metre high above ground level formed of 4 nos (25 x 6 mm) and 8 nos (25 x 3 mm) vertical ms riveted to 3 nos (25 x 6 mm) iron rings in two halves, bolted together with 8 mm dia and 30 mm long bolts including painting two coats with paint of approved brand over a coat of priming, complete in all respects. 118 street light works (excluding gst) 119 supply & fixing of 9 mtr gi octagonal pole of approved make (top dia 70mm, bottom dia 155 mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 mtr length) on rcc foundation including the cost of foundation, foundation bolts, excavation & back filling and required t&p complete in all respect 120 supply and fixing of led street light fitting having die cast aluminium body and diffuser with driver set suitable for 110 to 130 watt. confirming to ip 66 protection complete in all respect. cat: aaa 121 supply and laying of 16 sq.mm. 4 core aluminium conductor pvc insulated armoured served sheathed cables 1100 volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. on surface the cable run shall be fixed on m.s. clamps etc. of suitable size or as directed by the engineer-incharge, complete in all respect. the armouring of the cable shall be properly connected with the earth conductor by clamps etc. 122 supplying and laying 6 swg g.i. wire at 0.50 metre below ground level for conductor earth electrode, including connection/termination with gi thimble etc. as required. 123 supply and burring of safe earthing electrode t-39 (hot-dip galvanized), length up to 3000mm, outer pipe 76mm inner dia38mm terminal dia 12 mm ,outer gipipe of 16 swg and inner gi pipe of 12 swg withhot dip galvanization up to 100 micron filled with crystalline conductive mixture (ccm) having anti corrosive & conductive property with 50 kgs activated soil (bfc) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square c.i. frame with hinged cover & masonary housing. (from electrode terminal to switch board, cost of 25 x 3 gi. strip will be extra) make: as approved in u.p. p.w.d., & c.p.r.i. certified. 124 making connection of each street light by s/l 1.5 sqmm frlsh copper wire complete as per direction of engineer in charge. 125 supply & fixing of 9 mtr gi octagonal pole of approved make (top dia 70mm, bottom dia 155 mm and base plate 12mm thik) having 3mm thikness with double arm bracket (1 mtr length each ) on rcc foundationincluding the cost of foundation, foundation bolts, excavation & back filling and required t&p completee in all respect. 126 supply & laying of 63 mm dia (od-63 mm & id- 51 mm nominal) dwc hdpe pipe isi marked along with all accessories like socket, bend, couplers, etc. conforming to is 14930, part ii complete with fitting and cutting, jointing, etc. direct in ground (75 cm below ground level) including excavation & refilling the trench but excluding sand cushioning & protective covering etc, complete as required. 127 supply and fixing for automatic street light cubical control juction box painted with anti-corrosive alkali and acid proof pait consisting of 6 amps mcb (b - curve) complete in all respect 128 supply and fixing of 16 sq.mm plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the engineer-incharge. 129 supply and fixing of 40 amp. capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch tso 100 series with contactors, hrc fuses, isolating switch metering instrument & instrument box with cts etc. in case of tpn, complete in all respect. 130 supply and laying of 32 mm x 6 mm g.i. strip from earth electrode directly in the ground as required complete in all respect. 131 supply/ erection of surface mounted decorative pole 4500 mm long having base plate 300x300x12 mm with the bottom dia 139 mm upto 1 mtr long with the thickness of 3.6 mm and the top dia is 76 mm upto 3.5 mtr. log. decorative pole made out of galvanized iron tube with cast aluminium embellishments. the poles are painted with polyturetnane paint. the pole have service window at the bottom on the pole for housing the mcb and terminal strips and as per attached drawings. 132 s/f of single arm decorative bracket 100 mm long made of cast iron/ aluminium embellishments painted with polyturetnane paint. 133 supply of led decorative drop down light made of aluminium housing fitted with polycarbonate diffuser having 500 mm dia with 70 w. 134 supplyandlayingof aluminiumconductorpvc insulated armoured served sheathed cables 1100 volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. on surface the cable run shall be fixed on m.s. clamps etc. of suitable size or as directed by the engineer-incharge, complete in all respect. the armouring of the cable shall be properly connected with the earth conductor by clamps etc. 16 sq. mm 4 core 135 supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch tso 100 series with contactors, hrc fuses, isolating switch metering instrument & instrument box with cts etc. in case of tpn, complete in all respect. 40 a tpn 136 supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the engineer-incharge. 16 sq. mm 137 supply & laying of 63 mm dia (od-63 mm & id- 51 mm nominal) dwc hdpe pipe isi marked along with all accessories like socket, bend, couplers, etc. conforming to is 14930, part ii complete with fitting and cutting, jointing, etc. direct in ground (75 cm below ground level) including excavation & refilling the trench but excluding sand cushioning & protective covering etc, complete as required. 138 supply and laying 6 swg g.i. wire at 0.50 metre below ground level for conductor earth electrode, including connection/termination with gi thimble etc. as required. 139 supply and burring of safe earthing electrode t-39 (hot-dip galvanized), length up to 3000mm, outer pipe 76mm inner dia38mm terminal dia 12 mm ,outer gipipe of 16 swg and inner gi pipe of 12 swg withhot dip galvanization up to 100 micron filled with crystalline conductive mixture (ccm) having anti corrosive & conductive property with 50 kgs activated soil (bfc) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square c.i. frame with hinged cover & masonary housing. (from electrode terminal to switch board, cost of 25 x 3 gi. strip will be extra) make: as approved in u.p. p.w.d., & c.p.r.i. certified. 140 part - b utility shifting (including gst) 141 converstion of lt overhead line by underground lt line 142 lt xlpe insulated cable of size 3.5x400 sqmm. 143 lt xlpe insulated cable of size 3.5x240 sqmm. 144 lt xlpe insulated cable of size 3.5x150 sqmm. 145 lt xlpe insulated cable of size 3.5x70 sqmm. 146 9 mtr long stp 147 hdpe pipe 140mm dia peb0, pn-6 148 hdpe pipe 120 mm dia peb0, pn-6 149 hdpe pipe 75 mm dia p880, pn-6 150 aluminium crimping lugs 400sqmm 151 aluminium crimping lugs 240sqmm 152 aluminium crimping lugs 150sqmm 153 aluminium crimping lugs 70sqmm 154 6 swg g.l. wire for earthing along cables. 155 cable end termination using total double compression brass glands and crimping type cu. thimbles for 3.5x400 sqmm. lt cable 156 cable end termination using total double compression brass glands and crimping type cu. thimbles for 3.5x240 sqmm. lt cable 157 cable end termination using total double compression brass glands and crimping type cu. thimbles for 3.5x150 sqmm. lt cable 158 cable end termination using total double compression brass glands and crimping type cu. thimbles for 3.5x70 sqmm. lt cable 159 main lt panel at sub station- 400 kva (type a-2)lncomer- 1 set of 800 amp. tp mccb with spreader & extended handlemetering on lncomer - 1 set of digital ammeter with ass- 1 set of digatal voltmeter with vss- 1 set of led type phase lndicating light (22.5 mm.)with control mcbsoutgoing- 6 set of 250 amp. tp mccb with spreader & extended handte( 5 nos. + 1 no. for capacitor panel)- 2 set of 100 amp. tp mccb with spreader & extended handle 160 main lt panel at sub statton- 250 kva (type a-2) lncomer- 1 no. 630 amp. tp mdo acb with inbuilt mpr release with i ontoff tnai.ating lightmetering on lncomer - 1 set of digital ammeter with ass- i set oldigital volt-meler wirh vss- 1 set of led type phase indicating light (22.5 mm.j with control mcbs outgoing - 5 set of 250 amp. tp mccb with spreader & exrended handle- 2 set of 100 amp. tp mccb with spreader & extended handle flnstallation oflt distribution boards for lt underground system (type a,b&cj) 161 supply , installation, testing & commissioning of outdoor type feeder pillar panetto be made of 2 mm crca sheet and covers will be j.6mm crca sheet dulypowder coated paint with 300 amps al. busbar. (type-b2)lncomer - 250 amp. tp mccb - 1 no.outgoing - 63 amp. tp mccb - 5 nos.lnstallation of lt distribution boards forlt underground system (type-a, b & c) 162 outdoor type feeder pillar panel to be made of 2 mm crca sheet and covers will be 1.6mm crca sheet duly powder coated paint with 300 amps al. busbar. [type-b3] incomer - 100 amp. tp mccb - 1 no. outgoing - 63 amp. tp mccb - 4 nos.lnstallation of lt distribution boards for lt qnderground system [tvpe-a, b & cl 163 lockable distribution boxes of size 450x400mm with bus bar 100 amp. tpn to feed upto 10 houses (type c) 164 xlpe lt service armoured cable for single phase,2x6 sq. mm.(pvc armoured consumer service cablel 165 xlpe lt service armoured cable for single phase,2x10 sq. mm.(pvc armoured consumer service cablej 166 xlpe lt service armoured cable for three phase,4x10 sq. mm.[pvc armoured consumer service cablel 167 xlpe lt service armoured cable for three phase,4x1.6 sq. mm.(pvc armoured consumer service cablel 168 xlpe lt service armoured cable for three phase,4x25 sq. mm.(pvc armou[ed consumer service cable) 169 pvc pipe 32 mm dia 170 pvc pipe 50 mm dia 171 electronic kwh meter 1px2w with box. for single phase consumer 172 electronic kwh meter 3px4w static meter with box.for three phase consumer 173 carriage , laying of 3.5cx400 sq.mm size lt xlpe insulated cable underground in hdpe pipe size 140 mm dia. 174 carriage, laying of 3.5cx150/240 sq.mm size lt xlpe insulated cable underground in hdpe pipe size 1.20 mm dia. 175 carriage ,laying of 3.5cx70 sq.mm size lt xlpe insulated cable underground in hdpe pipe size 75mm dia. 176 painting of stp incuding paints [2 ltr red oxide and 2 ltr alluminum paint for each pole.l 177 grouting of st pole 178 cartage , erection and dismentling charges 22% of materials cost 179 conversion of 11kv overhead/underground line by 11kv line underground 180 11 kv cable size 3x185 sq.mm xlpe 181 stp 11m-is 410 sp-55 182 g.l pipe 4 dia 183 top channel 100x50x2240 mm 184 hdpe pipe 160 mm dia pe 80, pn-6 185 service clamp o/s 186 clamp for fixing pipe to pole 187 11 kv cable jointing kit size 3x185 sq.mm xlpe o/d 188 11 kv cable jointing kit size 3x185 sq.mm xlpe s/t 189 earthing complete. 190 m.s. nut & bolt with washer 191 bracing angle 65x65x6x2700 mm with clamp 192 stone pad 193 number plates with clamp 194 danger board & clamp with bolts & nuts 195 stay complete 196 g i barbed wire 197 carriage , layrng of 3x185 sq.mm size 11 kv xlpe insulated cable underground in hdpe pipe dia 160 mm. 198 painting of stp incuding paints (2 itr red oxide and z lt. allrn inrm pal,1t for each pole.) 199 grouting of st pole 200 grouting of stay set 201 cartage , erection and dismentling charges 22% of materials cost 202 conversion of 33kv overhead/ underground line by 33kv line underground 203 cable al. 3x300 sq.mm. xlpe 33 kv 204 stp 11m-is 410 sp-55 205 g.l pipe 6 dia 206 m.s.top channel 100x50x2240 mm 207 hdpe pipe 200 mm dia pe 80, pn-6 208 service clamp o/s 209 clamp for fixing pipe to pole 210 bracing angle 65x65x6x4300 mm with clamp 211 33 kv cable jointing kit 3x300 se mm outdoor 212 33 kv cable jointing kit 3x300 se mm straight through 213 earthing of pole by ms earthing rod of 2ox25o0 mm & 6 swg earthr.ng wire etc. 214 m.s. nut & bolt with washer 215 number plates with clamp 216 danger board & clamp with bolts & nuts 217 stay complete (stay rod 15x1800mm, stay wire 5 kg,, stay clamp, boult & nut rvith grouting 218 daner bqard barbed wire includin jumpering 219 carriage , layrng of 3x300 sq.mm size 33 kv xlpe insulated cable underground in hdpe pipe dia 200 mm. 220 painting of stp incuding paints (2 itr red oxide and z lt. allrn inrm pal,1t for each pole.) 221 grouting of st pole 222 grouting of stay set 223 cartage , erection and dismentling charges 22% of materials cost 224 installation of 250 kva transformer on dp for the shifting of 3 no. 250 kva. 9 no.400 kva & 3 no. 630 kva transformer 225 stp 11m-is 410 sp-55 226 ms channel 100x50x2240 mm 227 service clamp for round pole 228 m.s. bolt and nuts off size with washer 229 l.t. cable 3.5ox4oo so m 230 ltxlpe insulated,unarmoured aluminium singlc corc cable,1x240sq. mm.sizc 231 lt xlpe insulatcd,unarmoured aluminium singlc core cablc,1x400 sq. mm.size 232 earthing of 250 kva t/f with g.i. pip[ 233 earthing rod complet. 234 1 1 kv d.o. fi]se sets 235 1 1 kv tpmo 236 d.d. wire 70 qs mm 237 250 kva t/f 238 l.t. cubical b0x complete 239 l,t. cable 3.50x240 sq mm 240 stay set complete, 241 aluminimum lug 70 sqmm 242 aluminimum lug 240 sqmm 243 aluminimum lug 400 sqmm 244 pvc tape 245 t/f bushing connector of copper strip 246 labour , cartage & errection charges and dismentaling of existing t/f 247 dismentling and cartage from site to store charges 7% (other misclenous charges)

State Government

TRN :34450698 | 19 May, 2025

Tender Value : 0

Khandwa - Madhya Pradesh

Tender for procurement of consumable items insulating gaskets washers sleeves epoxy fibre glass material for 600 mw turbo generator /motor of unit 2 at 2x600 mw, sstpp, mppgcl, dongalia.

Central Government/Public Sector

TRN :34451266 | 21 May, 2025

Tender Value : 0

Amritsar - Punjab

Tender for gem bids for 3010 geru red ochre q4 target face - archery v2 q3 shade nets for agriculture and horticulture as per is 16008 part 2 shade nets made from mono filament yarns q3 metal polish liquid as per is 5487 q3 water proof hdpepp woven sack for packing - ofb q3 lime q3 thinner for epoxy paints bhel q3 monkey rope q3

Central Government/Public Sector

TRN :34439172 | 17 May, 2025

Tender Value : 0

Udhamsign Nagar - Uttaranchal

Tender for gem bids for ru2590092423 seal-off bushing (epoxy cast resin) drawing 32002000006 r02 it002 , ru2590092415 sealoff bushing (epoxy cast resin) drawing 32002000006 r02 it001 , ru2590093012 seal-off bushing (epoxy cast resin) drawing 45410053474 r07 , ru2590092040 seal-off bushing (epoxy cast resin) drawing 31241822351 r00 it001 , ru2590092326 seal-off bushing (epoxy cast resin) drawing 31001700005 r00 it-002 , ru2590092334 seal-off bushing (epoxy cast resin) drawing 31001700005 r00 it003 , ru2590092016 seal-off bushing (epoxy cast resin) drawing 31001200006 r00 it001 , ru2590092431 seal-off bushing (epoxy cast resin) drawing 32002000006 r02 it003 , ru2590092032 seal-off bushing (epoxy cast resin) drawing 31001200006 r00 it003 , ru2590092024 seal-off bushing (epoxy cast resin) drawing 31001200006 r00 it002 , ru2590092059 seal-off bushing (epoxy cast resin) drawing 31001200007 r00 it001

Boards / Undertakings / PSU

TRN :48869711 | 09 May, 2025

Tender Value : 0

Raigad - Maharashtra

Tender for fittings for setting up 500 kta pdh - pp unit at usar along with propane storage at uran and associated pipeline fittings for setting up 500 kta pdh - pp unit at usar along with propane storage at uran and associated pipeline , supply of fittingsas per complete scope mentioned in material requisition no.b378-000-wd-mr-3520 in all respects: , item sl no 1 b001 elbow.90, b-16.11, astm a 105, sw, 3000 0.5 inch , item sl no 2 b001 elbow.90, b-16.11, astm a 105, sw, 3000 1.0 inch , item sl no 3 b001 elbow.90, b-16.11, astm a 105, sw, 3000 1.5 inch , item sl no 4 b001 elbow.90, b-16.11, astm a 105, sw, 3000, h2 1.0 inch , item sl no 5 b001 elbow.90, b-16.11, astm a 105, sw, 3000, h2 1.5 inch , item sl no 6 b001 elbow.90, b-16.11, astm a 105, sw, 3000, ibr 1.5 inch , item sl no 7 b001 elbow.90, b-16.11, astm a 105, sw, 6000 0.5 inch , item sl no 8 b001 elbow.90, b-16.11, astm a 105, sw, 6000 0.75 inch , item sl no 9 b001 elbow.90, b-16.11, astm a 105, sw, 6000, h2 0.5 inch , item sl no 10 b001 elbow.90, b-16.11, astm a 105, sw, 6000, h2 0.75 inch , item sl no 11 b001 elbow.90, b-16.11, astm a 105, sw, 6000, ibr 0.5 inch , item sl no 12 b001 elbow.90, b-16.11, astm a 105, sw, 6000, ibr 0.75 inch , item sl no 13 b001 elbow.90, b-16.11, astm a 350 gr.lf2 cl.1, sw, 3000, lt 1.0 inch , item sl no 14 b001 elbow.90, b-16.11, astm a 350 gr.lf2 cl.1, sw, 3000, lt 1.5 inch , item sl no 15 b001 elbow.90, b-16.11, astm a 350 gr.lf2 cl.1, sw, 6000, lt 0.5 inch , item sl no 16 b001 elbow.90, b-16.11, astm a 350 gr.lf2 cl.1, sw, 6000, lt 0.75 inch , item sl no 17 b001 elbow.45, b-16.11, astm a 105, sw, 3000 1.0 inch , item sl no 18 b001 elbow.45, b-16.11, astm a 105, sw, 3000 1.5 inch , item sl no 19 b001 elbow.45, b-16.11, astm a 105, sw, 3000, ibr 1.0 inch , item sl no 20 b001 elbow.45, b-16.11, astm a 105, sw, 3000, ibr 1.5 inch , item sl no 21 b001 elbow.45, b-16.11, astm a 105, sw, 6000 0.5 inch , item sl no 22 b001 elbow.45, b-16.11, astm a 105, sw, 6000 0.75 inch , item sl no 23 b001 elbow.45, b-16.11, astm a 105, sw, 6000, ibr 0.5 inch , item sl no 24 b001 elbow.45, b-16.11, astm a 105, sw, 6000, ibr 0.75 inch , item sl no 25 b001 elbow.45, b-16.11, astm a 350 gr.lf2 cl.1, sw, 3000, lt 1.0 inch , item sl no 26 b001 t.equal, b-16.11, astm a 105, sw, 3000, h2 1.5 inch , item sl no 27 b001 t.equal, b-16.11, astm a 105, sw, 6000 0.5 inch , item sl no 28 b001 t.equal, b-16.11, astm a 105, sw, 6000 0.75 inch , item sl no 29 b001 t.equal, b-16.11, astm a 105, sw, 6000, h2 0.5 inch , item sl no 30 b001 t.equal, b-16.11, astm a 105, sw, 6000, h2 0.75 inch , item sl no 31 b001 t.equal, b-16.11, astm a 105, sw, 6000, ibr 0.5 inch , item sl no 32 b001 t.equal, b-16.11, astm a 350 gr.lf2 cl.1, sw, 3000, lt 1.0 inch , item sl no 33 b001 t.equal, b-16.11, astm a 350 gr.lf2 cl.1, sw, 6000, lt 0.5 inch , item sl no 34 b001 t.red, b-16.11, astm a 105, sw, 3000 1.0 inch, 0.75 inch , item sl no 35 b001 t.red, b-16.11, astm a 105, sw, 3000 1.5 inch, 0.75 inch , item sl no 36 b001 t.red, b-16.11, astm a 105, sw, 3000, h2 1.5 inch, 0.75 inch , item sl no 37 b001 t.red, b-16.11, astm a 105, sw, 3000, ibr 1.5 inch, 0.75 inch , item sl no 38 b001 t.red, b-16.11, astm a 105, sw, 3000, ibr 1.5 inch, 1.0 inch , item sl no 39 b001 t.red, b-16.11, astm a 350 gr.lf2 cl.1, sw, 3000, lt 1.0 inch, 0.75 inch , item sl no 40 b001 t.red, b-16.11, astm a 350 gr.lf2 cl.1, sw, 6000, lt 0.75 inch, 0.5 inch , item sl no 41 b001 swage.conc, bs-3799, astm a 105, pbe 0.75 inch, s160, 0.5 inch, s160 , item sl no 42 b001 swage.conc, bs-3799, astm a 105, pbe 1.0 inch, xs, 0.5 inch, s160 , item sl no 43 b001 swage.conc, bs-3799, astm a 105, pbe 1.5 inch, xs, 0.75 inch, s160 , item sl no 44 b001 swage.conc, bs-3799, astm a 105, pbe 1.5 inch, xs, 1.0 inch, xs , item sl no 45 b001 swage.conc, bs-3799, astm a 105, pbe 1.5 inch, xs, 1.25 inch, xs , item sl no 46 b001 swage.conc, bs-3799, astm a 105, pbe, h2 0.75 inch, s160, 0.5 inch, s160 , item sl no 47 b001 swage.conc, bs-3799, astm a 105, pbe, h2 1.5 inch, xs, 1.0 inch, xs , item sl no 48 b001 swage.conc, bs-3799, astm a 105, pbe, ibr 1.5 inch, xs, 0.75 inch, s160 , item sl no 49 b001 swage.conc, bs-3799, astm a 105, tle 0.75 inch, s160, 0.5 inch, s160 , item sl no 50 b001 swage.conc, bs-3799, astm a 105, tle, h2 0.75 inch, s160, 0.5 inch, s160 , item sl no 51 b001 swage.conc, bs-3799, astm a 105, tle, ibr 0.75 inch, s160, 0.5 inch, s160 , item sl no 52 b001 swage.conc, bs-3799, astm a 350 gr.lf2 cl.1, pbe, lt 0.75 inch, s160, 0.5 inch, s160 , item sl no 53 b001 swage.conc, bs-3799, astm a 350 gr.lf2 cl.1, pbe, lt 1.0 inch, xs, 0.75 inch, s160 , item sl no 54 b001 swage.conc, bs-3799, astm a 350 gr.lf2 cl.1, tle, lt 0.75 inch, s160, 0.5 inch, s160 , item sl no 55 b001 swage.ecc, bs-3799, astm a 105, pbe 1.0 inch, xs, 0.5 inch, s160 , item sl no 56 b001 swage.ecc, bs-3799, astm a 105, pbe 1.0 inch, xs, 0.75 inch, s160 , item sl no 57 b001 swage.ecc, bs-3799, astm a 105, pbe 1.5 inch, xs, 1.0 inch, xs , item sl no 58 b001 swage.ecc, bs-3799, astm a 105, pbe, h2 0.75 inch, s160, 0.5 inch, s160 , item sl no 59 b001 swage.ecc, bs-3799, astm a 105, pbe, h2 1.5 inch, xs, 0.5 inch, s160 , item sl no 60 b001 swage.ecc, bs-3799, astm a 105, pbe, ibr 0.75 inch, s160, 0.5 inch, s160 , item sl no 61 b001 swage.ecc, bs-3799, astm a 350 gr.lf2 cl.1, pbe, lt 1.0 inch, xs, 0.75 inch, s160 , item sl no 62 b001 cap, b-16.11, astm a 105, scrf, 3000 0.5 inch , item sl no 63 b001 cap, b-16.11, astm a 105, scrf, 3000 1.0 inch , item sl no 64 b001 cap, b-16.11, astm a 105, scrf, 3000, ibr 1.5 inch , item sl no 65 b001 cap, b-16.11, astm a 105, scrf, 6000 0.5 inch , item sl no 66 b001 cap, b-16.11, astm a 105, scrf, 6000 0.75 inch , item sl no 67 b001 cap, b-16.11, astm a 105, scrf, 6000, h2 0.5 inch , item sl no 68 b001 cap, b-16.11, astm a 105, scrf, 6000, h2 0.75 inch , item sl no 69 b001 cap, b-16.11, astm a 105, scrf, 6000, ibr 0.5 inch , item sl no 70 b001 cap, b-16.11, astm a 350 gr.lf2 cl.1, scrf, 6000, lt 0.5 inch , item sl no 71 b001 cplng.full, b-16.11, astm a 105, scrf, 6000 0.5 inch , item sl no 72 b001 cplng.full, b-16.11, astm a 105, scrf, 6000, h2 0.5 inch , item sl no 73 b001 cplng.full, b-16.11, astm a 105, scrf, 6000, ibr 0.5 inch , item sl no 74 b001 cplng.full, b-16.11, astm a 105, sw, 3000 1.5 inch , item sl no 75 b001 cplng.full, b-16.11, astm a 105, sw, 3000, h2 1.5 inch , item sl no 76 b001 cplng.full, b-16.11, astm a 105, sw, 6000 0.5 inch , item sl no 77 b001 cplng.full, b-16.11, astm a 105, sw, 6000, h2 0.5 inch , item sl no 78 b001 cplng.full, b-16.11, astm a 105, sw, 6000, h2 0.75 inch , item sl no 79 b001 cplng.full, b-16.11, astm a 105, sw, 6000, ibr 0.5 inch , item sl no 80 b001 cplng.full, b-16.11, astm a 105, sw, 6000, ibr 0.75 inch , item sl no 81 b001 cplng.full, b-16.11, astm a 350 gr.lf2 cl.1, scrf, 6000, lt 0.5 inch , item sl no 82 b001 cplng.full, b-16.11, astm a 350 gr.lf2 cl.1, scrf, 6000, lt 0.75 inch , item sl no 83 b001 cplng.full, b-16.11, astm a 350 gr.lf2 cl.1, sw, 3000, lt 1.5 inch , item sl no 84 b001 cplng.full, b-16.11, astm a 350 gr.lf2 cl.1, sw, 6000, lt 0.5 inch , item sl no 85 b001 cplng.full, b-16.11, astm a 350 gr.lf2 cl.1, sw, 6000, lt 0.75 inch , item sl no 86 b001 cplng.half, b-16.11, astm a 105, sw, 3000 1.0 inch , item sl no 87 b001 cplng.half, b-16.11, astm a 105, sw, 3000, ibr 1.5 inch , item sl no 88 b001 cplng.half, b-16.11, astm a 105, sw, 6000 0.5 inch , item sl no 89 b001 cplng.half, b-16.11, astm a 105, sw, 6000 0.75 inch , item sl no 90 b001 cplng.half, b-16.11, astm a 105, sw, 6000, h2 0.75 inch , item sl no 91 b001 cplng.half, b-16.11, astm a 105, sw, 6000, ibr 0.5 inch , item sl no 92 b001 cplng.half, b-16.11, astm a 105, sw, 6000, ibr 0.75 inch , item sl no 93 b001 cplng.half, b-16.11, astm a 350 gr.lf2 cl.1, sw, 6000, lt 0.5 inch , item sl no 94 b001 cplng.half, b-16.11, astm a 350 gr.lf2 cl.1, sw, 6000, lt 0.75 inch , item sl no 95 b001 cplng.half, b-16.11, astm a 350 gr.lf2 cl.1, sw, 6000, lth2 0.75 inch , item sl no 96 b001 cplng.lh, b-16.11, astm a 105, sw, 3000 1.0 inch , item sl no 97 b001 cplng.lh, b-16.11, astm a 105, sw, 3000 1.5 inch , item sl no 98 b001 cplng.lh, b-16.11, astm a 105, sw, 3000, h2 1.5 inch , item sl no 99 b001 cplng.lh, b-16.11, astm a 105, sw, 3000, ibr 1.5 inch , item sl no 100 b001 cplng.lh, b-16.11, astm a 105, sw, 6000 0.75 inch , item sl no 101 b001 cplng.lh, b-16.11, astm a 105, sw, 6000, h2 0.75 inch , item sl no 102 b001 cplng.lh, b-16.11, astm a 350 gr.lf2 cl.1, sw, 3000, lt 1.0 inch , item sl no 103 b001 cplng.lh, b-16.11, astm a 350 gr.lf2 cl.1, sw, 3000, lt 1.5 inch , item sl no 104 b001 cplng.lh, b-16.11, astm a 350 gr.lf2 cl.1, sw, 6000, lt 0.75 inch , item sl no 105 b001 cross, b-16.11, astm a 105, sw, 6000, h2 0.5 inch , item sl no 106 b002 nipple, b-36.10, astm a 106 gr.b, pbe, seamless 0.5 inch, s160, 80 mm , item sl no 107 b002 nipple, b-36.10, astm a 106 gr.b, pbe, seamless 0.5 inch, s160, 100 mm , item sl no 108 b002 nipple, b-36.10, astm a 106 gr.b, pbe, seamless 0.75 inch, s160, 80 mm , item sl no 109 b002 nipple, b-36.10, astm a 106 gr.b, pbe, seamless 1.0 inch, xs, 80 mm , item sl no 110 b002 nipple, b-36.10, astm a 106 gr.b, pbe, seamless 1.0 inch, xs, toe mm , item sl no 111 b002 nipple, b-36.10, astm a 106 gr.b, pbe, seamless, h2 1.0 inch, xs, 80 mm , item sl no 112 b002 nipple, b-36.10, astm a 106 gr.b, pbe, seamless, ibr 0.5 inch, s160, 100 mm , item sl no 113 b002 nipple, b-36.10, astm a 106 gr.b, pbe, seamless, ibr 0.75 inch, s160, 80 mm , item sl no 114 b002 nipple, b-36.10, astm a 106 gr.b, toe, seamless 0.5 inch, s160, 100 mm , item sl no 115 b002 nipple, b-36.10, astm a 106 gr.b, toe, seamless 0.75 inch, s160, 100 mm , item sl no 116 b002 nipple, b-36.10, astm a 106 gr.b, toe, seamless, h2 0.5 inch, s160, 100 mm , item sl no 117 b002 nipple, b-36.10, astm a 106 gr.b, toe, seamless, ibr 0.5 inch, s160, 100 mm , item sl no 118 b002 nipple, b-36.10, astm a 106 gr.b, toe, seamless, ibr 0.5 inch, s160, 80 mm , item sl no 119 b002 nipple, b-36.10, astm a 333 gr.6, pbe, seamless, lt 0.5 inch, s160, 100 mm , item sl no 120 b002 nipple, b-36.10, astm a 333 gr.6, pbe, seamless, lt 0.75 inch, s160, toe mm , item sl no 121 b002 nipple, b-36.10, astm a 333 gr.6, toe, seamless, lt 0.5 inch, s160, 100 mm , item sl no 122 b003 elbow.90, b-16.9, astm a 234 gr.wpb, bw, 1.5d 2.0 inch, xs , item sl no 123 b003 elbow.90, b-16.9, astm a 234 gr.wpb, bw, 1.5d 3.0 inch, std , item sl no 124 b003 elbow.90, b-16.9, astm a 234 gr.wpb, bw, 1.5d 4.0 inch, std , item sl no 125 b003 elbow.90, b-16.9, astm a 234 gr.wpb, bw, 1.5d 6.0 inch, std , item sl no 126 b003 elbow.90, b-16.9, astm a 234 gr.wpb, bw, 1.5d, h2 2.0 inch, xs , item sl no 127 b003 elbow.90, b-16.9, astm a 234 gr.wpb, bw, 1.5d, h2 2.0 inch, s160 , item sl no 128 b003 elbow.90, b-16.9, astm a 234 gr.wpb, bw, 1.5d, h2 3.0 inch, std , item sl no 129 b003 elbow.90, b-16.9, astm a 234 gr.wpb, bw, 1.5d, h2 4.0 inch, xs , item sl no 130 b003 elbow.90, b-16.9, astm a 234 gr.wpb, bw, 1.5d, h2 6.0 inch, std , item sl no 131 b003 elbow.90, b-16.9, astm a 234 gr.wpb, bw, 1.5d, ibr 2.0 inch, xs , item sl no 132 b003 elbow.90, b-16.9, astm a 234 gr.wpb, bw, 1.5d, ibr 3.0 inch, std , item sl no 133 b003 elbow.90, b-16.9, astm a 234 gr.wpb, bw, 1.5d, ibr 4.0 inch, xs , item sl no 134 b003 elbow.90, b-16.9, astm a 234 gr.wpb, bw, 1.5d, ibr 4.0 inch, std , item sl no 135 b003 elbow.90, b-16.9, astm a 234 gr.wpb, bw, 1.5d, ibr 6.0 inch, xs , item sl no 136 b003 elbow.90, b-16.9, astm a 234 gr.wpb, bw, 1.5d, ibr 6.0 inch, std , item sl no 137 b003 elbow.90, b-16.9, astm a 234 gr.wpb, bw, 1.5d, ibr 8.0 inch, std , item sl no 138 b003 elbow.90, b-16.9, astm a 420 gr.wpl6, bw, 1.5d, lt 6.0 inch, std , item sl no 139 b003 elbow.90, b-16.9, astm a 420 gr.wpl6, bw, 1.5d, lt 8.0 inch, std , item sl no 140 b003 elbow.45, b-16.9, astm a 234 gr.wpb, bw, 1.5d 2.0 inch, xs , item sl no 141 b003 elbow.45, b-16.9, astm a 234 gr.wpb, bw, 1.5d 3.0 inch, std , item sl no 142 b003 elbow.45, b-16.9, astm a 234 gr.wpb, bw, 1.5d 4.0 inch, std , item sl no 143 b003 elbow.45, b-16.9, astm a 234 gr.wpb, bw, 1.5d 6.0 inch, std , item sl no 144 b003 elbow.45, b-16.9, astm a 234 gr.wpb, bw, 1.5d 8.0 inch, std , item sl no 145 b003 elbow.45, b-16.9, astm a 234 gr.wpb, bw, 1.5d, h2 6.0 inch, std , item sl no 146 b003 elbow.45, b-16.9, astm a 234 gr.wpb, bw, 1.5d, h2 8.0 inch, std , item sl no 147 b003 elbow.45, b-16.9, astm a 234 gr.wpb, bw, 1.5d, ibr 2.0 inch, xs , item sl no 148 b003 elbow.45, b-16.9, astm a 234 gr.wpb, bw, 1.5d, ibr 3.0 inch, std , item sl no 149 b003 elbow.45, b-16.9, astm a 234 gr.wpb, bw, 1.5d, ibr 4.0 inch, std , item sl no 150 b003 elbow.45, b-16.9, astm a 234 gr.wpb, bw, 1.5d, ibr 4.0 inch, xs , item sl no 151 b003 elbow.45, b-16.9, astm a 234 gr.wpb, bw, 1.5d, ibr 6.0 inch, std , item sl no 152 b003 elbow.45, b-16.9, astm a 234 gr.wpb, bw, 1.5d, ibr 8.0 inch, std , item sl no 153 b003 elbow.45, b-16.9, astm a 420 gr.wpl6, bw, 1.5d, lt 2.0 inch, xs , item sl no 154 b003 elbow.45, b-16.9, astm a 420 gr.wpl6, bw, 1.5d, lt 3.0 inch, std , item sl no 155 b003 elbow.45, b-16.9, astm a 420 gr.wpl6, bw, 1.5d, lt 6.0 inch, std , item sl no 156 b003 elbow.45, b-16.9, astm a 420 gr.wpl6, bw, 1.5d, lt 8.0 inch, std , item sl no 157 b004 elbow.90, b-16.9, astm a 234 gr.wpb, bw, 1.5d 10.0 inch, std , item sl no 158 b004 elbow.90, b-16.9, astm a 234 gr.wpb, bw, 1.5d 12.0 inch, std , item sl no 159 b004 elbow.90, b-16.9, astm a 234 gr.wpb, bw, 1.5d, h2 10.0 inch, std , item sl no 160 b004 elbow.90, b-16.9, astm a 234 gr.wpb, bw, 1.5d, h2 12.0 inch, xs , item sl no 161 b004 elbow.90, b-16.9, astm a 234 gr.wpb, bw, 1.5d, ibr 10.0 inch, s80 , item sl no 162 b004 elbow.90, b-16.9, astm a 234 gr.wpb, bw, 1.5d, ibr 10.0 inch, std , item sl no 163 b004 elbow.90, b-16.9, astm a 234 gr.wpb, bw, 1.5d, ibr 12.0 inch, s80 , item sl no 164 b004 elbow.90, b-16.9, astm a 420 gr.wpl6, bw, 1.5d, lt 10.0 inch, xs , item sl no 165 b004 elbow.45, b-16.9, astm a 234 gr.wpb, bw, 1.5d 12.0 inch, std , item sl no 166 b004 elbow.45, b-16.9, astm a 234 gr.wpb, bw, 1.5d, h2 12.0 inch, xs , item sl no 167 b004 elbow.45, b-16.9, astm a 234 gr.wpb, bw, 1.5d, ibr 12.0 inch, s80 , item sl no 168 b004 elbow.45, b-16.9, astm a 420 gr.wpl6, bw, 1.5d, lt 10.0 inch, std , item sl no 169 b004 elbow.45, b-16.9, astm a 420 gr.wpl6, bw, 1.5d, lt 12.0 inch, std , item sl no 170 b005 t.equal, b-16.9, astm a 234 gr.wpb, bw, h2 2.0 inch, xs , item sl no 171 b005 t.equal, b-16.9, astm a 234 gr.wpb, bw, ibr 2.0 inch, xs , item sl no 172 b005 t.equal, b-16.9, astm a 234 gr.wpb, bw, ibr 3.0 inch, std , item sl no 173 b005 t.equal, b-16.9, astm a 234 gr.wpb, bw, ibr 4.0 inch, std , item sl no 174 b005 t.equal, b-16.9, astm a 234 gr.wpb, bw, ibr 4.0 inch, xs , item sl no 175 b005 t.equal, b-16.9, astm a 420 gr.wpl6, bw, lt 2.0 inch, xs , item sl no 176 b005 t.red, b-16.9, astm a 234 gr.wpb, bw 2.0 inch, xs, 1.0 inch, xs , item sl no 177 b005 t.red, b-16.9, astm a 234 gr.wpb, bw, ibr 2.0 inch, xs, 1.5 inch, xs , item sl no 178 b006 t.equal, b-16.9, astm a 234 gr.wpb, bw 10.0 inch, std , item sl no 179 b006 t.equal, b-16.9, astm a 234 gr.wpb, bw, ibr 10.0 inch, s80 , item sl no 180 b007 reduc.conc, b-16.9, astm a 234 gr.wpb, bw 2.0 inch, xs, 1.5 inch, xs , item sl no 181 b007 reduc.conc, b-16.9, astm a 234 gr.wpb, bw 3.0 inch, std, 2.0 inch, xs , item sl no 182 b007 reduc.conc, b-16.9, astm a 234 gr.wpb, bw 4.0 inch, std, 2.0 inch, xs , item sl no 183 b007 reduc.conc, b-16.9, astm a 234 gr.wpb, bw 4.0 inch, std, 3.0 inch, std , item sl no 184 b007 reduc.conc, b-16.9, astm a 234 gr.wpb, bw 6.0 inch, std, 3.0 inch, std , item sl no 185 b007 reduc.conc, b-16.9, astm a 234 gr.wpb, bw 6.0 inch, std, 4.0 inch, std , item sl no 186 b007 reduc.conc, b-16.9, astm a 234 gr.wpb, bw 8.0 inch, std, 4.0 inch, std , item sl no 187 b007 reduc.conc, b-16.9, astm a 234 gr.wpb, bw, h2 4.0 inch, xs, 3.0 inch, std , item sl no 188 b007 reduc.conc, b-16.9, astm a 234 gr.wpb, bw, h2 8.0 inch, std, 4.0 inch, std , item sl no 189 b007 reduc.conc, b-16.9, astm a 234 gr.wpb, bw, ibr 2.0 inch, xs, 1.5 inch, xs , item sl no 190 b007 reduc.conc, b-16.9, astm a 234 gr.wpb, bw, ibr 4.0 inch, xs, 2.0 inch, xs , item sl no 191 b007 reduc.conc, b-16.9, astm a 234 gr.wpb, bw, ibr 4.0 inch, std, 3.0 inch, std , item sl no 192 b007 reduc.conc, b-16.9, astm a 234 gr.wpb, bw, ibr 4.0 inch, std, 2.0 inch, xs , item sl no 193 b007 reduc.conc, b-16.9, astm a 234 gr.wpb, bw, ibr 4.0 inch, xs, 3.0 inch, std , item sl no 194 b007 reduc.conc, b-16.9, astm a 234 gr.wpb, bw, ibr 6.0 inch, xs, 3.0 inch, std , item sl no 195 b007 reduc.conc, b-16.9, astm a 234 gr.wpb, bw, ibr 8.0 inch, std, 6.0 inch, std , item sl no 196 b007 reduc.conc, b-16.9, astm a 234 gr.wpb, bw, ibr 8.0 inch, xs, 6.0 inch, xs , item sl no 197 b007 reduc.conc, b-16.9, astm a 234 gr.wpb, bw, ibr 8.0 inch, std, 4.0 inch, std , item sl no 198 b007 reduc.conc, b-16.9, astm a 420 gr.wpl6, bw, lt 2.0 inch, xs, 0.75 inch, s160 , item sl no 199 b007 reduc.conc, b-16.9, astm a 420 gr.wpl6, bw, lt 2.0 inch, xs, 1.5 inch, xs , item sl no 200 b007 reduc.conc, b-16.9, astm a 420 gr.wpl6, bw, lt 2.0 inch, xs, 1.0 inch, xs , item sl no 201 b007 reduc.conc, b-16.9, astm a 420 gr.wpl6, bw, lt 4.0 inch, std, 2.0 inch, xs , item sl no 202 b007 reduc.conc, b-16.9, astm a 420 gr.wpl6, bw, lt 8.0 inch, std, 6.0 inch, std , item sl no 203 b008 reduc.conc, b-16.9, astm a 234 gr.wpb, bw 10.0 inch, std, 6.0 inch, std , item sl no 204 b008 reduc.conc, b-16.9, astm a 234 gr.wpb, bw 12.0 inch, std, 6.0 inch, std , item sl no 205 b008 reduc.conc, b-16.9, astm a 234 gr.wpb, bw 14.0 inch, std, 8.0 inch, std , item sl no 206 b008 reduc.conc, b-16.9, astm a 234 gr.wpb, bw, h2 12.0 inch, xs, 8.0 inch, std , item sl no 207 b008 reduc.conc, b-16.9, astm a 420 gr.wpl6, bw, lt 10.0 inch, std, 6.0 inch, std , item sl no 208 b009 reduc.ecc, b-16.9, astm a 234 gr.wpb, bw 4.0 inch, std, 2.0 inch, xs , item sl no 209 b009 reduc.ecc, b-16.9, astm a 234 gr.wpb, bw 6.0 inch, std, 4.0 inch, std , item sl no 210 b009 reduc.ecc, b-16.9, astm a 234 gr.wpb, bw 8.0 inch, std, 4.0 inch, std , item sl no 211 b009 reduc.ecc, b-16.9, astm a 234 gr.wpb, bw, h2 6.0 inch, std, 4.0 inch, std , item sl no 212 b009 reduc.ecc, b-16.9, astm a 234 gr.wpb, bw, h2 8.0 inch, std, 6.0 inch, std , item sl no 213 b009 reduc.ecc, b-16.9, astm a 234 gr.wpb, bw, ibr 2.0 inch, xs, 1.0 inch, xs , item sl no 214 b009 reduc.ecc, b-16.9, astm a 234 gr.wpb, bw, ibr 3.0 inch, std, 2.0 inch, xs , item sl no 215 b009 reduc.ecc, b-16.9, astm a 234 gr.wpb, bw, ibr 4.0 inch, std, 2.0 inch, xs , item sl no 216 b009 reduc.ecc, b-16.9, astm a 420 gr.wpl6, bw, lt 2.0 inch, xs, 1.0 inch, xs , item sl no 217 b009 reduc.ecc, b-16.9, astm a 420 gr.wpl6, bw, lt 4.0 inch, std, 2.0 inch, xs , item sl no 218 b009 reduc.ecc, b-16.9, astm a 420 gr.wpl6, bw, lt 6.0 inch, std, 4.0 inch, std , item sl no 219 b009 reduc.ecc, b-16.9, astm a 420 gr.wpl6, bw, lt 8.0 inch, std, 4.0 inch, std , item sl no 220 b009 reduc.ecc, b-16.9, astm a 420 gr.wpl6, bw, lt 8.0 inch, xs, 4.0 inch, std , item sl no 221 b010 reduc.ecc, b-16.9, astm a 234 gr.wpb, bw 10.0 inch, std, 8.0 inch, std , item sl no 222 b010 reduc.ecc, b-16.9, astm a 234 gr.wpb, bw 12.0 inch, std, 6.0 inch, std , item sl no 223 b010 reduc.ecc, b-16.9, astm a 234 gr.wpb, bw 12.0 inch, std, 8.0 inch, std , item sl no 224 b010 reduc.ecc, b-16.9, astm a 234 gr.wpb, bw, h2 10.0 inch, std, 6.0 inch, std , item sl no 225 b010 reduc.ecc, b-16.9, astm a 234 gr.wpb, bw, h2 12.0 inch, xs, 10.0 inch, std , item sl no 226 b010 reduc.ecc, b-16.9, astm a 420 gr.wpl6, bw, lt 10.0 inch, std, 6.0 inch, std , item sl no 227 b010 reduc.ecc, b-16.9, astm a 420 gr.wpl6, bw, lt 14.0 inch, std, 10.0 inch, std , item sl no 228 b011 cap, b-16.9, astm a 234 gr.wpb, bw 3.0 inch, std, 0.75 inch , item sl no 229 b011 cap, b-16.9, astm a 234 gr.wpb, bw 3.0 inch, std , item sl no 230 b011 cap, b-16.9, astm a 234 gr.wpb, bw 4.0 inch, std, 2.0 inch , item sl no 231 b011 cap, b-16.9, astm a 234 gr.wpb, bw 4.0 inch, std , item sl no 232 b011 cap, b-16.9, astm a 234 gr.wpb, bw, ibr 3.0 inch, std, 1.5 inch , item sl no 233 b011 cap, b-16.9, astm a 420 gr.wpl6, bw, lt 2.0 inch, xs , item sl no 234 b012 cap, b-16.9, astm a 234 gr.wpb, bw, ibr 24.0 inch, std, 2.0 inch , item sl no 235 b013 cap, b-16.9, astm a 234 gr.wpb, bw, ibr 30.0 inch, std, 2.0 inch , item sl no 236 b013 cap, b-16.9, astm a 234 gr.wpb, bw, ibr 32.0 inch, std, 30.0 inch , item sl no 237 b014 elbow.90, b-16.9, astm a 234 gr.wpb-w, bw, 1.5d 10.0 inch, std , item sl no 238 b014 elbow.90, b-16.9, astm a 234 gr.wpb-w, bw, 1.5d 12.0 inch, std , item sl no 239 b014 elbow.45, b-16.9, astm a 234 gr.wpb-w, bw, 1.5d 10.0 inch, std , item sl no 240 b015 elbow.90, b-16.9, astm a 234 gr.wpb-w, bw, 1.5d 16.0 inch, std , item sl no 241 b015 elbow.90, b-16.9, astm a 234 gr.wpb-w, bw, 1.5d 16.0 inch, 6.0 mm thk , item sl no 242 b015 elbow.90, b-16.9, astm a 234 gr.wpb-w, bw, 1.5d 18.0 inch, std , item sl no 243 b015 elbow.90, b-16.9, astm a 234 gr.wpb-w, bw, 1.5d 24.0 inch, 8.0 mm thk , item sl no 244 b015 elbow.90, b-16.9, astm a 234 gr.wpb-w, bw, 1.5d, ibr 18.0 inch, std , item sl no 245 b015 elbow.90, b-16.9, astm a 420 gr.wpl6-w, bw, 1.5d, lt 18.0 inch, std , item sl no 246 b015 elbow.90, b-16.9, astm a 420 gr.wpl6-w, bw, 1.5d, lt 20.0 inch, std , item sl no 247 b015 elbow.90, b-16.9, astm a 420 gr.wpl6-w, bw, 1.5d, lt 24.0 inch, std , item sl no 248 b015 elbow.45, b-16.9, astm a 234 gr.wpb-w, bw, 1.5d 16.0 inch, xs , item sl no 249 b015 elbow.45, b-16.9, astm a 234 gr.wpb-w, bw, 1.5d 20.0 inch, 8.0 mm thk , item sl no 250 b015 elbow.45, b-16.9, astm a 234 gr.wpb-w, bw, 1.5d 24.0 inch, s30 , item sl no 251 b015 elbow.45, b-16.9, astm a 234 gr.wpb-w, bw, 1.5d, ibr 16.0 inch, std , item sl no 252 b016 t.equal, b-16.9, astm a 234 gr.wpb-w, bw 10.0 inch, std , item sl no 253 b017 t.equal, b-16.9, astm a 234 gr.wpb-w, bw 16.0 inch, 6.0 mm thk , item sl no 254 b018 reduc.conc, b-16.9, astm a 234 gr.wpb-w, bw 10.0 inch, std, 8.0 inch, std , item sl no 255 b018 reduc.conc, b-16.9, astm a 234 gr.wpb-w, bw 12.0 inch, std, 8.0 inch, std , item sl no 256 b018 reduc.conc, b-16.9, astm a 234 gr.wpb-w, bw 12.0 inch, std, 10.0 inch, std , item sl no 257 b018 reduc.conc, b-16.9, astm a 234 gr.wpb-w, bw 12.0 inch, std, 6.0 inch, std , item sl no 258 b019 reduc.conc, b-16.9, astm a 234 gr.wpb-w, bw 16.0 inch, std, 14.0 inch, std , item sl no 259 b019 reduc.conc, b-16.9, astm a 234 gr.wpb-w, bw 16.0 inch, xs, 14.0 inch, std , item sl no 260 b019 reduc.conc, b-16.9, astm a 234 gr.wpb-w, bw 24.0 inch, s30, 20.0 inch, xs , item sl no 261 b020 reduc.conc, b-16.9, astm a 234 gr.wpb-w, bw 30.0 inch, std, 28.0 inch, std , item sl no 262 b021 reduc.ecc, b-16.9, astm a 234 gr.wpb-w, bw 12.0 inch, std, 8.0 inch, std , item sl no 263 b022 reduc.ecc, b-16.9, astm a 234 gr.wpb-w, bw 18.0 inch, std, 10.0 inch, std , item sl no 264 b022 reduc.ecc, b-16.9, astm a 234 gr.wpb-w, bw 18.0 inch, std, 14.0 inch, std , item sl no 265 b022 reduc.ecc, b-16.9, astm a 234 gr.wpb-w, bw 20.0 inch, std, 18.0 inch, std , item sl no 266 b022 reduc.ecc, b-16.9, astm a 234 gr.wpb-w, bw 24.0 inch, s30, 16.0 inch, xs , item sl no 267 b022 reduc.ecc, b-16.9, astm a 234 gr.wpb-w, bw 24.0 inch, s30, 20.0 inch, xs , item sl no 268 b022 reduc.ecc, b-16.9, astm a 234 gr.wpb-w, bw 24.0 inch, std, 18.0 inch, std , item sl no 269 b022 reduc.ecc, b-16.9, astm a 234 gr.wpb-w, bw, ibr 16.0 inch, std, 14.0 inch, std , item sl no 270 b022 reduc.ecc, b-16.9, astm a 420 gr.wpl6-w, bw, lt 16.0 inch, std, 10.0 inch, std , item sl no 271 b022 reduc.ecc, b-16.9, astm a 420 gr.wpl6-w, bw, lt 20.0 inch, xs, 14.0 inch, std , item sl no 272 b023 reduc.ecc, b-16.9, astm a 234 gr.wpb-w, bw 36.0 inch, std, 32.0 inch, std , item sl no 273 b024 elbow.90, b-16.11, astm a 182 gr.f11 cl.2, sw, 6000 0.75 inch , item sl no 274 b024 elbow.90, b-16.11, astm a 182 gr.f11 cl.2, sw, 6000, h2 0.75 inch , item sl no 275 b024 cap, b-16.11, astm a 182 gr.f11 cl.2, scrf, 6000, ibr 0.5 inch , item sl no 276 b024 cplng.full, b-16.11, astm a 182 gr.f11 cl.2, sw, 3000, h2 1.5 inch , item sl no 277 b024 cplng.half, b-16.11, astm a 182 gr.f11 cl.2, sw, 6000 0.75 inch , item sl no 278 b024 cplng.lh, b-16.11, astm a 182 gr.f11 cl.2, sw, 3000, h2 1.5 inch , item sl no 279 b025 nipple, b-36.10, astm a 335 gr.p11, pbe, seamless, ibr 0.75 inch, s160, 80 mm , item sl no 280 b026 elbow.90, b-16.9, astm a 234 gr.wp11 cl.1, bw, 1.5d 8.0 inch, xs , item sl no 281 b026 elbow.90, b-16.9, astm a 234 gr.wp11 cl.1, bw, 1.5d, h2 2.0 inch, xs , item sl no 282 b026 elbow.90, b-16.9, astm a 234 gr.wp11 cl.1, bw, 1.5d, h2 3.0 inch, xs , item sl no 283 b026 elbow.90, b-16.9, astm a 234 gr.wp11 cl.1, bw, 1.5d, ibr 8.0 inch, xs , item sl no 284 b026 elbow.45, b-16.9, astm a 234 gr.wp11 cl.1, bw, 1.5d 2.0 inch, xs , item sl no 285 b027 elbow.90, b-16.9, astm a 234 gr.wp11 cl.1, bw, 1.5d 10.0 inch, xs , item sl no 286 b028 reduc.conc, b-16.9, astm a 234 gr.wp11 cl.1, bw, h2 4.0 inch, xs, 3.0 inch, xs , item sl no 287 b028 reduc.conc, b-16.9, astm a 234 gr.wp11 cl.1, bw, ibr 8.0 inch, xs, 6.0 inch, xs , item sl no 288 b029 elbow.90, b-16.11, astm a 182 gr.f304, sw, 3000 0.5 inch , item sl no 289 b029 elbow.90, b-16.11, astm a 182 gr.f304, sw, 3000 0.75 inch , item sl no 290 b029 elbow.90, b-16.11, astm a 182 gr.f304, sw, 3000 1.5 inch , item sl no 291 b029 elbow.90, b-16.11, astm a 182 gr.f304, sw, 3000, cryo 0.75 inch , item sl no 292 b029 elbow.90, b-16.11, astm a 182 gr.f304, sw, 3000, cryo 1.0 inch , item sl no 293 b029 elbow.90, b-16.11, astm a 182 gr.f304, sw, 3000, cryo 1.5 inch , item sl no 294 b029 elbow.90, b-16.11, astm a 182 gr.f304, sw, 3000, lth2 0.75 inch , item sl no 295 b029 elbow.90, b-16.11, astm a 182 gr.f316, sw, 3000 0.75 inch , item sl no 296 b029 elbow.90, b-16.11, astm a 182 gr.f316, sw, 3000 1.0 inch , item sl no 297 b029 elbow.45, b-16.11, astm a 182 gr.f304, sw, 3000 0.75 inch , item sl no 298 b029 elbow.45, b-16.11, astm a 182 gr.f304, sw, 3000, cryo 0.75 inch , item sl no 299 b029 elbow.45, b-16.11, astm a 182 gr.f304, sw, 3000, cryo 1.0 inch , item sl no 300 b029 elbow.45, b-16.11, astm a 182 gr.f304, sw, 3000, cryo 1.5 inch , item sl no 301 b029 elbow.45, b-16.11, astm a 182 gr.f304, sw, 3000, lth2 0.75 inch , item sl no 302 b029 t.equal, b-16.11, astm a 182 gr.f304, sw, 3000 0.5 inch , item sl no 303 b029 t.equal, b-16.11, astm a 182 gr.f304, sw, 3000 0.75 inch , item sl no 304 b029 t.equal, b-16.11, astm a 182 gr.f304, sw, 3000 1.0 inch , item sl no 305 b029 t.equal, b-16.11, astm a 182 gr.f304, sw, 3000 1.5 inch , item sl no 306 b029 t.equal, b-16.11, astm a 182 gr.f304, sw, 3000, cryo 0.5 inch , item sl no 307 b029 t.equal, b-16.11, astm a 182 gr.f304, sw, 3000, cryo 0.75 inch , item sl no 308 b029 t.equal, b-16.11, astm a 182 gr.f316, sw, 3000 0.75 inch , item sl no 309 b029 t.red, b-16.11, astm a 182 gr.f304, sw, 3000 1.0 inch, 0.75 inch , item sl no 310 b029 t.red, b-16.11, astm a 182 gr.f304, sw, 3000 1.5 inch, 0.75 inch , item sl no 311 b029 t.red, b-16.11, astm a 182 gr.f304, sw, 3000 1.5 inch, 1.0 inch , item sl no 312 b029 t.red, b-16.11, astm a 182 gr.f304, sw, 3000, cryo 0.75 inch, 0.5 inch , item sl no 313 b029 t.red, b-16.11, astm a 182 gr.f304, sw, 3000, cryo 1.0 inch, 0.75 inch , item sl no 314 b029 t.red, b-16.11, astm a 182 gr.f304, sw, 3000, cryo 1.5 inch, 0.75 inch , item sl no 315 b029 swage.conc, bs-3799, astm a 182 gr.f304, pbe 0.75 inch, 80s, 0.5 inch, 80s , item sl no 316 b029 swage.conc, bs-3799, astm a 182 gr.f304, pbe, cryo 0.75 inch, 80s, 0.5 inch, 80s , item sl no 317 b029 swage.conc, bs-3799, astm a 182 gr.f304, tse, cryo 0.75 inch, 80s, 0.5 inch, 80s , item sl no 318 b029 swage.ecc, bs-3799, astm a 182 gr.f304, pbe 1.0 inch, 40s, 0.5 inch, 80s , item sl no 319 b029 swage.ecc, bs-3799, astm a 182 gr.f304, pbe 1.5 inch, 40s, 1.0 inch, 40s , item sl no 320 b029 swage.ecc, bs-3799, astm a 182 gr.f304, pbe, cryo 1.0 inch, 40s, 0.75 inch, 80s , item sl no 321 b029 swage.ecc, bs-3799, astm a 182 gr.f304, pbe, lth2 1.5 inch, 40s, 1.0 inch, 40s , item sl no 322 b029 cap, b-16.11, astm a 182 gr.f304, scrf, 3000 0.75 inch , item sl no 323 b029 cap, b-16.11, astm a 182 gr.f304, scrf, 3000 1.5 inch , item sl no 324 b029 cap, b-16.11, astm a 182 gr.f304, scrf, 3000, cryo 0.5 inch , item sl no 325 b029 cap, b-16.11, astm a 182 gr.f304, scrf, 3000, cryo 0.75 inch , item sl no 326 b029 cap, b-16.11, astm a 182 gr.f304, scrf, 3000, cryo 1.0 inch , item sl no 327 b029 plug, b-16.11, astm a 182 gr.f304, scrm, 6000 0.5 inch , item sl no 328 b029 cplng.full, b-16.11, astm a 182 gr.f304, scrf, 3000, cryo 0.5 inch , item sl no 329 b029 cplng.full, b-16.11, astm a 182 gr.f304, sw, 3000 0.5 inch , item sl no 330 b029 cplng.full, b-16.11, astm a 182 gr.f304, sw, 3000 1.5 inch , item sl no 331 b029 cplng.full, b-16.11, astm a 182 gr.f304, sw, 3000, cryo 0.75 inch , item sl no 332 b029 cplng.full, b-16.11, astm a 182 gr.f304, sw, 3000, cryo 1.0 inch , item sl no 333 b029 cplng.full, b-16.11, astm a 182 gr.f304, sw, 3000, cryo 1.5 inch , item sl no 334 b029 cplng.full, b-16.11, astm a 182 gr.f304, sw, 3000, lth2 0.75 inch , item sl no 335 b029 cplng.full, b-16.11, astm a 182 gr.f304, sw, 6000 0.5 inch , item sl no 336 b029 cplng.full, b-16.11, astm a 182 gr.f304, sw, 6000 0.75 inch , item sl no 337 b029 cplng.full, b-16.11, astm a 182 gr.f304, sw, 9000 0.5 inch , item sl no 338 b029 cplng.full, b-16.11, astm a 182 gr.f304, sw, 9000 0.75 inch , item sl no 339 b029 cplng.full, b-16.11, astm a 182 gr.f316, sw, 3000 1.0 inch , item sl no 340 b029 cplng.half, b-16.11, astm a 182 gr.f304, sw, 3000 0.5 inch , item sl no 341 b029 cplng.half, b-16.11, astm a 182 gr.f304, sw, 3000 0.75 inch , item sl no 342 b029 cplng.half, b-16.11, astm a 182 gr.f304, sw, 3000 1.0 inch , item sl no 343 b029 cplng.half, b-16.11, astm a 182 gr.f304, sw, 3000, cryo 0.5 inch , item sl no 344 b029 cplng.half, b-16.11, astm a 182 gr.f304, sw, 3000, cryo 0.75 inch , item sl no 345 b029 cplng.half, b-16.11, astm a 182 gr.f304, sw, 3000, cryo 1.5 inch , item sl no 346 b029 cplng.half, b-16.11, astm a 182 gr.f304, sw, 3000, lth2 0.75 inch , item sl no 347 b029 cplng.half, b-16.11, astm a 182 gr.f304, sw, 3000, lth2 1.5 inch , item sl no 348 b029 cplng.half, b-16.11, astm a 182 gr.f316, sw, 3000 0.75 inch , item sl no 349 b029 cplng.lh, b-16.11, astm a 182 gr.f304, sw, 3000, cryo 0.75 inch , item sl no 350 b029 cplng.lh, b-16.11, astm a 182 gr.f304, sw, 3000, cryo 1.0 inch , item sl no 351 b029 cplng.lh, b-16.11, astm a 182 gr.f304, sw, 3000, cryo 1.5 inch , item sl no 352 b029 cplng.red, b-16.11, astm a 182 gr.f304, sw, 3000 1.0 inch, 0.5 inch , item sl no 353 b030 nipple, b-36.19, astm a 312 tp304, pbe, seamless 0.5 inch, 80s, 80 mm , item sl no 354 b030 nipple, b-36.19, astm a 312 tp304, pbe, seamless 0.5 inch, 80s, 100 mm , item sl no 355 b030 nipple, b-36.19, astm a 312 tp304, pbe, seamless 0.75 inch, 80s, 80 mm , item sl no 356 b030 nipple, b-36.19, astm a 312 tp304, pbe, seamless 1.0 inch, 40s, 80 mm , item sl no 357 b030 nipple, b-36.19, astm a 312 tp304, pbe, seamless 1.0 inch, 40s, toe mm , item sl no 358 b030 nipple, b-36.19, astm a 312 tp304, pbe, seamless, cryo 0.5 inch, 80s, 100 mm , item sl no 359 b030 nipple, b-36.19, astm a 312 tp304, pbe, seamless, cryo 0.75 inch, 80s, 80 mm , item sl no 360 b030 nipple, b-36.19, astm a 312 tp304, toe, seamless, cryo 0.5 inch, 80s, 100 mm , item sl no 361 b030 nipple, b-36.19, astm a 312 tp304, toe, seamless, lth2 0.5 inch, 80s, 100 mm , item sl no 362 b030 nipple, b-36.19, astm a312 gr.tp304/304l, pbe, seamless 0.75 inch, 80s, 100 mm , item sl no 363 b030 nipple, b-36.19, astm a312 gr.tp304/304l, toe, seamless 0.75 inch, 80s, 80 mm , item sl no 364 b030 nipple, b-36.19, astm a312 gr.tp304/304l, toe, seamless 0.75 inch, 80s, 100 mm , item sl no 365 b031 elbow.90, b-16.9, astm a 403 gr.wp304-s, bw, 1.5d 2.0 inch, 40s , item sl no 366 b031 elbow.90, b-16.9, astm a 403 gr.wp304-s, bw, 1.5d 3.0 inch, 10s , item sl no 367 b031 elbow.90, b-16.9, astm a 403 gr.wp304-s, bw, 1.5d 4.0 inch, 10s , item sl no 368 b031 elbow.90, b-16.9, astm a 403 gr.wp304-s, bw, 1.5d, cryo 2.0 inch, 40s , item sl no 369 b031 elbow.90, b-16.9, astm a 403 gr.wp304-s, bw, 1.5d, cryo 3.0 inch, 10s , item sl no 370 b031 elbow.90, b-16.9, astm a 403 gr.wp304-s, bw, 1.5d, cryo 4.0 inch, 10s , item sl no 371 b031 elbow.90, b-16.9, astm a 403 gr.wp304-s, bw, 1.5d, cryo 4.0 inch, 40s , item sl no 372 b031 elbow.90, b-16.9, astm a 403 gr.wp304-s, bw, 1.5d, cryo 6.0 inch, 10s , item sl no 373 b031 elbow.90, b-16.9, astm a 403 gr.wp304-s, bw, 1.5d, cryo 6.0 inch, 40s , item sl no 374 b031 elbow.90, b-16.9, astm a 403 gr.wp304-s, bw, 1.5d, cryo 8.0 inch, 10s , item sl no 375 b031 elbow.90, b-16.9, astm a 403 gr.wp304-s, bw, 1.5d, cryo 8.0 inch, 6.35 mm thk , item sl no 376 b031 elbow.90, b-16.9, astm a 403 gr.wp304-s, bw, 1.5d, lth2 3.0 inch, 10s , item sl no 377 b031 elbow.90, b-16.9, astm a 403 gr.wp316-s, bw, 1.5d 2.0 inch, 40s , item sl no 378 b031 elbow.90, b-16.9, astm a 403 gr.wp316l-s, bw, 1.5d 6.0 inch, 10s , item sl no 379 b031 elbow.45, b-16.9, astm a 403 gr.wp304-s, bw, 1.5d 2.0 inch, 40s , item sl no 380 b031 elbow.45, b-16.9, astm a 403 gr.wp304-s, bw, 1.5d 3.0 inch, 10s , item sl no 381 b031 elbow.45, b-16.9, astm a 403 gr.wp304-s, bw, 1.5d, cryo 2.0 inch, 40s , item sl no 382 b031 elbow.45, b-16.9, astm a 403 gr.wp304-s, bw, 1.5d, cryo 3.0 inch, 10s , item sl no 383 b031 elbow.45, b-16.9, astm a 403 gr.wp304-s, bw, 1.5d, cryo 4.0 inch, 10s , item sl no 384 b031 elbow.45, b-16.9, astm a 403 gr.wp304-s, bw, 1.5d, cryo 6.0 inch, 10s , item sl no 385 b031 elbow.45, b-16.9, astm a 403 gr.wp304-s, bw, 1.5d, cryo 8.0 inch, 6.35 mm thk , item sl no 386 b031 elbow.45, b-16.9, astm a 403 gr.wp304-s, bw, 1.5d, cryo 8.0 inch, 10s , item sl no 387 b031 elbow.45, b-16.9, astm a 403 gr.wp304-s, bw, 1.5d, lth2 2.0 inch, 40s , item sl no 388 b032 t.equal, b-16.9, astm a 403 gr.wp304-s, bw 4.0 inch, 10s , item sl no 389 b032 t.equal, b-16.9, astm a 403 gr.wp304-s, bw, cryo 2.0 inch, 40s , item sl no 390 b032 t.equal, b-16.9, astm a 403 gr.wp304-s, bw, cryo 4.0 inch, 40s , item sl no 391 b032 t.equal, b-16.9, astm a 403 gr.wp304-s, bw, cryo 6.0 inch, 10s , item sl no 392 b032 t.equal, b-16.9, astm a 403 gr.wp304-s, bw, cryo 6.0 inch, 40s , item sl no 393 b032 t.equal, b-16.9, astm a 403 gr.wp304-s, bw, cryo 8.0 inch, 10s , item sl no 394 b032 t.equal, b-16.9, astm a 403 gr.wp316-s, bw 2.0 inch, 40s , item sl no 395 b033 reduc.conc, b-16.9, astm a 403 gr.wp304-s, bw 4.0 inch, 10s, 2.0 inch, 40s , item sl no 396 b033 reduc.conc, b-16.9, astm a 403 gr.wp304-s, bw, cryo 3.0 inch, 10s, 2.0 inch, 40s , item sl no 397 b033 reduc.conc, b-16.9, astm a 403 gr.wp304-s, bw, cryo 4.0 inch, 40s, 2.0 inch, 40s , item sl no 398 b033 reduc.conc, b-16.9, astm a 403 gr.wp304-s, bw, cryo 4.0 inch, 10s, 3.0 inch, 10s , item sl no 399 b033 reduc.conc, b-16.9, astm a 403 gr.wp304-s, bw, cryo 4.0 inch, 10s, 2.0 inch, 40s , item sl no 400 b033 reduc.conc, b-16.9, astm a 403 gr.wp304-s, bw, cryo 6.0 inch, 40s, 4.0 inch, 40s , item sl no 401 b033 reduc.conc, b-16.9, astm a 403 gr.wp304-s, bw, cryo 6.0 inch, 40s, 3.0 inch, 40s , item sl no 402 b033 reduc.conc, b-16.9, astm a 403 gr.wp304-s, bw, cryo 6.0 inch, 10s, 4.0 inch, 10s , item sl no 403 b033 reduc.conc, b-16.9, astm a 403 gr.wp304-s, bw, cryo 8.0 inch, 40s, 6.0 inch, 40s , item sl no 404 b033 reduc.conc, b-16.9, astm a 403 gr.wp316-s, bw 2.0 inch, 40s, 1.0 inch, 40s , item sl no 405 b033 reduc.conc, b-16.9, astm a 403 gr.wp316-s, bw 3.0 inch, 10s, 2.0 inch, 40s , item sl no 406 b034 reduc.ecc, b-16.9, astm a 403 gr.wp304-s, bw 2.0 inch, 40s, 1.5 inch, 40s , item sl no 407 b034 reduc.ecc, b-16.9, astm a 403 gr.wp304-s, bw 3.0 inch, 10s, 2.0 inch, 40s , item sl no 408 b034 reduc.ecc, b-16.9, astm a 403 gr.wp304-s, bw 4.0 inch, 10s, 1.5 inch, 40s , item sl no 409 b034 reduc.ecc, b-16.9, astm a 403 gr.wp304-s, bw 4.0 inch, 10s, 3.0 inch, 10s , item sl no 410 b034 reduc.ecc, b-16.9, astm a 403 gr.wp304-s, bw, cryo 3.0 inch, 10s, 2.0 inch, 40s , item sl no 411 b034 reduc.ecc, b-16.9, astm a 403 gr.wp304-s, bw, cryo 4.0 inch, 10s, 2.0 inch, 40s , item sl no 412 b034 reduc.ecc, b-16.9, astm a 403 gr.wp304-s, bw, cryo 4.0 inch, 10s, 3.0 inch, 10s , item sl no 413 b034 reduc.ecc, b-16.9, astm a 403 gr.wp304-s, bw, cryo 6.0 inch, 10s, 4.0 inch, 10s , item sl no 414 b034 reduc.ecc, b-16.9, astm a 403 gr.wp304-s, bw, cryo 6.0 inch, 10s, 3.0 inch, 10s , item sl no 415 b034 reduc.ecc, b-16.9, astm a 403 gr.wp304-s, bw, cryo 8.0 inch, 10s, 4.0 inch, 10s , item sl no 416 b034 reduc.ecc, b-16.9, astm a 403 gr.wp304-s, bw, cryo 8.0 inch, 10s, 6.0 inch, 10s , item sl no 417 b034 reduc.ecc, b-16.9, astm a 403 gr.wp304-s, bw, cryo 8.0 inch, 6.35 mm thk, 6.0 inch, 10s , item sl no 418 b035 elbow.90, b-16.9, astm a 403 gr.wp304-wx, bw, 1.5d, cryo 10.0 inch, 10s , item sl no 419 b035 elbow.90, b-16.9, astm a 403 gr.wp304-wx, bw, 1.5d, cryo 10.0 inch, 6.35 mm thk , item sl no 420 b035 elbow.90, b-16.9, astm a 403 gr.wp304-wx, bw, 1.5d, cryo 12.0 inch, 10s , item sl no 421 b035 elbow.45, b-16.9, astm a 403 gr.wp304-wx, bw, 1.5d, cryo 10.0 inch, 10s , item sl no 422 b035 elbow.45, b-16.9, astm a 403 gr.wp304-wx, bw, 1.5d, lth2 12.0 inch, 8.38 mm thk , item sl no 423 b036 t.equal, b-16.9, astm a 403 gr.wp304-wx, bw, cryo 10.0 inch, 10s , item sl no 424 b036 t.equal, b-16.9, astm a 403 gr.wp304-wx, bw, cryo 12.0 inch, 10s , item sl no 425 b037 reduc.ecc, b-16.9, astm a 403 gr.wp304-wx, bw, cryo 10.0 inch, 10s, 4.0 inch, 10s , item sl no 426 b037 reduc.ecc, b-16.9, astm a 403 gr.wp304-wx, bw, cryo 10.0 inch, 10s, 6.0 inch, 10s , item sl no 427 b037 reduc.ecc, b-16.9, astm a 403 gr.wp304-wx, bw, cryo 12.0 inch, 10s, 6.0 inch, 10s , item sl no 428 b038 reduc.ecc, b-16.9, astm a 403 gr.wp304-wx, bw, cryo 16.0 inch, 10s, 14.0 inch, 10s , item sl no 429 i0429 elbow.90, b-16.11, astm a 105 (epoxy-coated), sw, 3000 1.0 inch , item sl no 430 i0430 elbow.90, b-16.11, astm a 105 (epoxy-coated), sw, 6000 0.5 inch , item sl no 431 i0431 elbow.90, b-16.11, astm a 105 (epoxy-coated), sw, 6000 0.75 inch , item sl no 432 i0432 elbow.90, b-16.11, astm a182 gr.f304/304l, sw, 3000 0.75 inch , item sl no 433 i0433 elbow.90, b-16.11, astm a182 gr.f304/304l, sw, 9000 0.5 inch , item sl no 434 i0434 elbow.90, b-16.9, a 234 gr.wpb (epoxy coated), bw, 1.5d 4.0 inch, std , item sl no 435 i0435 elbow.90, b-16.9, a 234 gr.wpb (epoxy coated), bw, 1.5d 6.0 inch, std , item sl no 436 i0436 elbow.90, b-16.9, a 234 gr.wpb (epoxy coated), bw, 1.5d 8.0 inch, std , item sl no 437 i0437 elbow.90, b-16.9, a 234 gr.wpb-w (epoxy coated), bw, 1.5d 14.0 inch, std , item sl no 438 i0438 elbow.90, b-16.9, astm a 234 gr.wpb, bw, 1.5d, h2 0.75 inch, s160 , item sl no 439 i0439 elbow.90, b-16.9, astm a 403 gr.wp304-s, bw, 1.5d 0.5 inch, 80s , item sl no 440 i0440 elbow.90, b-16.9, astm a 403 gr.wp304-s, bw, 1.5d 0.75 inch, 80s , item sl no 441 i0441 elbow.90, b-16.9, astm a 403 gr.wp304-wx, bw, 1.5d, cryo 30.0 inch, 22.0 mm thk , item sl no 442 i0442 elbow.90, b-16.9, astm a 420 gr.wpl6-w, bw, 1.5d, lt 30.0 inch, 14.0 mm thk , item sl no 443 i0443 elbow.90, b-16.9, astm a403 gr.wp304/304l-s, bw, 1.5d 2.0 inch, 40s , item sl no 444 i0444 elbow.45, b-16.11, astm a182 gr.f304/304l, sw, 3000 0.75 inch , item sl no 445 i0445 elbow.45, b-16.9, a 234 gr.wpb (epoxy coated), bw, 1.5d 6.0 inch, std , item sl no 446 i0446 elbow.45, b-16.9, a 234 gr.wpb (epoxy coated), bw, 1.5d 12.0 inch, std , item sl no 447 i0447 elbow.45, b-16.9, a 234 gr.wpb-w (epoxy coated), bw, 1.5d 8.0 inch, std , item sl no 448 i0448 elbow.45, b-16.9, a 234 gr.wpb-w (epoxy coated), bw, 1.5d 10.0 inch, std , item sl no 449 i0449 elbow.45, b-16.9, a 234 gr.wpb-w (epoxy coated), bw, 1.5d 12.0 inch, std , item sl no 450 i0450 elbow.45, b-16.9, a 234 gr.wpb-w (epoxy coated), bw, 1.5d 14.0 inch, std , item sl no 451 i0451 elbow.45, b-16.9, a 234 gr.wpb-w (epoxy coated), bw, 1.5d 24.0 inch, 8.0 mm thk , item sl no 452 i0452 elbow.45, b-16.9, astm a 403 gr.wp304-s, bw, 1.5d 0.5 inch, 80s , item sl no 453 i0453 elbow.45, b-16.9, astm a 403 gr.wp304-s, bw, 1.5d 0.75 inch, 80s , item sl no 454 i0454 elbow.45, b-16.9, astm a 420 gr.wpl6-w, bw, 1.5d, lt 48.0 inch, 20.0 mm thk , item sl no 455 i0455 elbow.45, b-16.9, astm a403 gr.wp304/304l-s, bw, 1.5d 2.0 inch, 40s , item sl no 456 i0456 pipe.bend, jobstd, astm a 105, bw, 1.5d 1.0 inch, xs, 60 degree , item sl no 457 i0457 pipe.bend, jobstd, astm a 105, bw, 1.5d 1.0 inch, xs, 30 degree , item sl no 458 i0458 pipe.bend, jobstd, astm a 105, pe, 1.5d 1.0 inch, xs, 60 degree , item sl no 459 i0459 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 1.5d 2.0 inch, xs, 30 degree , item sl no 460 i0460 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 1.5d 8.0 inch, std, 90 degree , item sl no 461 i0461 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 1.5d 8.0 inch, std, 30 degree , item sl no 462 i0462 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 3d 1.0 inch, xs, 130 degree , item sl no 463 i0463 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 3d 1.0 inch, xs, 30 degree , item sl no 464 i0464 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 3d 1.0 inch, xs, 40 degree , item sl no 465 i0465 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 3d 1.0 inch, xs, 120 degree , item sl no 466 i0466 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 3d 2.0 inch, xs, 30 degree , item sl no 467 i0467 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 3d 2.0 inch, xs, 120 degree , item sl no 468 i0468 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 3d 3.0 inch, std, 120 degree , item sl no 469 i0469 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 3d 3.0 inch, std, 90 degree , item sl no 470 i0470 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 3d 4.0 inch, std, 90 degree , item sl no 471 i0471 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 3d 4.0 inch, std, 30 degree , item sl no 472 i0472 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 3d 4.0 inch, std, 45 degree , item sl no 473 i0473 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 3d 6.0 inch, std, 90 degree , item sl no 474 i0474 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 3d 8.0 inch, std, 85 degree , item sl no 475 i0475 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 3d 8.0 inch, std, 90 degree , item sl no 476 i0476 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 3d 8.0 inch, std, 80 degree , item sl no 477 i0477 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 3d 8.0 inch, std, 70 degree , item sl no 478 i0478 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 3d 8.0 inch, std, 60 degree , item sl no 479 i0479 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 3d 8.0 inch, std, 50 degree , item sl no 480 i0480 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 3d 8.0 inch, std, 45 degree , item sl no 481 i0481 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 3d 8.0 inch, std, 30 degree , item sl no 482 i0482 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 4d 8.0 inch, std, 90 degree , item sl no 483 i0483 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 4d 8.0 inch, std, 30 degree , item sl no 484 i0484 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 4d 10.0 inch, std, 90 degree , item sl no 485 i0485 pipe.bend, jobstd, astm a 234 gr.wpb, bw, 9d 8.0 inch, std, 90 degree , item sl no 486 i0486 pipe.bend, jobstd, astm a 403 gr.wp304-s, bw, 3d, cryo 4.0 inch, 40s, 45 degree , item sl no 487 i0487 pipe.bend, jobstd, astm a 403 gr.wp304-s, bw, 3d, cryo 4.0 inch, 40s, 90 degree , item sl no 488 i0488 pipe.bend, jobstd, astm a403 gr.wp304/304l-s, bw, 1.5d, cryo 3.0 inch, 10s, 30 degree , item sl no 489 i0489 pipe.bend, jobstd, astm a403 gr.wp304/304l-s, bw, 1.5d, cryo 3.0 inch, 10s, 120 degree , item sl no 490 i0490 pipe.bend, jobstd, astm a403 gr.wp304/304l-s, bw, 1.5d, cryo 6.0 inch, 10s, 30 degree , item sl no 491 i0491 pipe.bend, jobstd, astm a403 gr.wp304/304l-s, bw, 1.5d, cryo 6.0 inch, 10s, 45 degree , item sl no 492 i0492 pipe.bend, jobstd, astm a403 gr.wp304/304l-s, bw, 1.5d, cryo 6.0 inch, 10s, 105 degree , item sl no 493 i0493 pipe.bend, jobstd, astm a403 gr.wp304/304l-s, bw, 1.5d, cryo 6.0 inch, 10s, 150 degree , item sl no 494 i0494 pipe.bend, jobstd, astm a403 gr.wp304/304l-s, bw, 1.5d, cryo 8.0 inch, 6.35 mm thk, 30 degree , item sl no 495 i0495 t.equal, b-16.11, astm a 105 (epoxy-coated), sw, 6000 0.5 inch , item sl no 496 i0496 t.equal, b-16.11, astm a182 gr.f304/304l, sw, 3000 0.75 inch , item sl no 497 i0497 t.equal, b-16.11, astm a182 gr.f304/304l, sw, 9000 0.5 inch , item sl no 498 i0498 t.equal, b-16.11, astm a182 gr.f304/304l, sw, 9000 0.75 inch , item sl no 499 i0499 t.equal, b-16.9, a 234 gr.wpb-w (epoxy coated), bw 8.0 inch, std , item sl no 500 i0500 t.equal, b-16.9, astm a 234 gr.wpb, bw, h2 0.75 inch, s160 , item sl no 501 i0501 t.equal, b-16.9, astm a 403 gr.wp304-s, bw 0.75 inch, 80s , item sl no 502 i0502 t.equal, b-16.9, astm a403 gr.wp304/304l-s, bw 2.0 inch, 40s , item sl no 503 i0503 t.red, b-16.11, astm a182 gr.f304/304l, sw, 3000 0.75 inch, 0.5 inch , item sl no 504 i0504 reduc.conc, b-16.9, a 234 gr.wpb-w (epoxy coated), bw 8.0 inch, std, 6.0 inch, std , item sl no 505 i0505 reduc.ecc, b-16.9, astm a403 gr.wp304/304l-s, bw 2.0 inch, 40s, 1.5 inch, 40s , item sl no 506 i0506 reduc.ecc, b-16.9, astm a403 gr.wp304/304l-s, bw 3.0 inch, 10s, 2.0 inch, 40s , item sl no 507 i0507 reduc.ecc, jobstd, astm a 234 gr.wpb-w, bw 54.0 inch, 14.0 mm thk, 44.0 inch, xs , item sl no 508 i0508 reduc.ecc, jobstd, astm a 234 gr.wpb-w, bw 72.0 inch, 14.0 mm thk, 54.0 inch, 14.0 mm thk , item sl no 509 i0509 swage.conc, bs-3799, astm a 105, pbe 3.0 inch, std, 1.0 inch, xs , item sl no 510 i0510 swage.conc, bs-3799, astm a 105, pbe, h2 2.0 inch, xs, 0.75 inch, s160 , item sl no 511 i0511 swage.conc, bs-3799, astm a 105, pbe, h2 2.0 inch, xs, 1.0 inch, xs , item sl no 512 i0512 swage.conc, bs-3799, astm a 105, pbe, h2 3.0 inch, std, 1.5 inch, xs , item sl no 513 i0513 swage.conc, bs-3799, astm a 105, pbe, ibr 2.0 inch, xs, 1.5 inch, xs , item sl no 514 i0514 swage.conc, bs-3799, astm a 182 gr.f11 cl.2, pbe, h2 3.0 inch, xs, 1.5 inch, xs , item sl no 515 i0515 swage.conc, bs-3799, astm a 182 gr.f304, pbe, cryo 2.0 inch, 40s, 0.75 inch, 80s , item sl no 516 i0516 swage.conc, bs-3799, astm a 350 gr.lf2 cl.1, pbe, lt 2.0 inch, xs, 0.5 inch, s160 , item sl no 517 i0517 swage.conc, bs-3799, astm a 350 gr.lf2 cl.1, pbe, lt 2.0 inch, xs, 1.0 inch, xs , item sl no 518 i0518 swage.conc, bs-3799, astm a 350 gr.lf2 cl.1, pbe, lt 3.0 inch, std, 1.5 inch, xs , item sl no 519 i0519 swage.conc, bs-3799, astm a182 gr.f304/304l, pbe 0.75 inch, 80s, 0.5 inch, 80s , item sl no 520 i0520 swage.conc, bs-3799, astm a182 gr.f304/304l, pbe 1.5 inch, 40s, 0.75 inch, 80s , item sl no 521 i0521 swage.conc, bs-3799, astm a182 gr.f304/304l, pbe 2.0 inch, 40s, 1.0 inch, 40s , item sl no 522 i0522 swage.conc, bs-3799, astm a182 gr.f304/304l, pbe 2.0 inch, 40s, 1.5 inch, 40s , item sl no 523 i0523 swage.conc, bs-3799, astm a182 gr.f304/304l, pbe 2.0 inch, 40s, 0.75 inch, 80s , item sl no 524 i0524 swage.ecc, bs-3799, astm a 105, pbe 2.0 inch, xs, 1.0 inch, xs , item sl no 525 i0525 swage.ecc, bs-3799, astm a 105, pbe 2.0 inch, xs, 1.5 inch, xs , item sl no 526 i0526 swage.ecc, bs-3799, astm a 105, pbe 3.0 inch, std, 1.5 inch, xs , item sl no 527 i0527 swage.ecc, bs-3799, astm a 105, pbe, ibr 2.0 inch, xs, 1.5 inch, xs , item sl no 528 i0528 swage.ecc, bs-3799, astm a 105, pbe, ibr 2.0 inch, xs, 0.75 inch, s160 , item sl no 529 i0529 swage.ecc, bs-3799, astm a 105, pbe, ibr 3.0 inch, std, 1.5 inch, xs , item sl no 530 i0530 swage.ecc, bs-3799, astm a 182 gr.f11 cl.2, pbe, h2 2.0 inch, xs, 1.5 inch, xs , item sl no 531 i0531 swage.ecc, bs-3799, astm a 182 gr.f304, pbe 2.0 inch, 40s, 0.5 inch, 80s , item sl no 532 i0532 swage.ecc, bs-3799, astm a 182 gr.f304, pbe 2.0 inch, 40s, 1.0 inch, 40s , item sl no 533 i0533 swage.ecc, bs-3799, astm a 182 gr.f304, pbe, cryo 3.0 inch, 10s, 1.5 inch, 40s , item sl no 534 i0534 swage.ecc, bs-3799, astm a182 gr.f304/304l, pbe, 9000 0.75 inch, 7.47 mm thk, 0.5 inch, 7.47 mm thk , item sl no 535 i0535 cap, b-16.11, astm a182 gr.f304/304l, scrf, 3000 0.75 inch , item sl no 536 i0536 cap, b-16.9, astm a 234 gr.wpb, bw, ibr 34.0 inch, 16.0 mm thk, 2.0 inch , item sl no 537 i0537 plug, b-16.11, astm a 105, scrm 0.5 inch , item sl no 538 i0538 plug, b-16.11, astm a 105, scrm 0.75 inch , item sl no 539 i0539 plug, b-16.11, astm a182 gr.f304/304l, scrm 0.5 inch , item sl no 540 i0540 plug, b-16.11, astm a182 gr.f304/304l, scrm 0.75 inch , item sl no 541 i0541 cplng.full, b-16.11, astm a 105 (epoxy-coated), sw, 6000 0.5 inch , item sl no 542 i0542 cplng.full, b-16.11, astm a 105 (epoxy-coated), sw, 6000 0.75 inch , item sl no 543 i0543 cplng.full, b-16.11, astm a182 gr.f304/304l, sw, 3000 0.5 inch , item sl no 544 i0544 cplng.full, b-16.11, astm a182 gr.f304/304l, sw, 3000 0.75 inch , item sl no 545 i0545 cplng.half, b-16.11, astm a182 gr.f304/304l, sw, 3000 0.5 inch , item sl no 546 i0546 cplng.half, b-16.11, astm a182 gr.f304/304l, sw, 3000 0.75 inch , item sl no 547 i0547 stub.end, b-16.9, astm a182 gr.f304/304l, bw, 125aarh 0.75 inch, 80s , item sl no 548 i0548 weldolet, mss-sp97, astm a 105, bw 8.0 inch, std, 2.0 inch, xs , item sl no 549 i0549 weldolet, mss-sp97, astm a 105, bw 8.0 inch, std, 3.0 inch, std , item sl no 550 i0550 weldolet, mss-sp97, astm a 105, bw, h2 3.0 inch, xs, 0.75 inch, s160 , item sl no 551 i0551 weldolet, mss-sp97, astm a182 gr.f304/304l, bw 2.0 inch, 40s, 0.75 inch, 80s , item sl no 552 i0552 weldolet, mss-sp97, astm a182 gr.f304/304l, bw 4.0 inch, 10s, 1.0 inch, 40s , item sl no 553 i0553 elbowlet, mss-sp97, astm a 105, bw 8.0 inch, std, 4.0 inch, s160 , item sl no 554 i0554 nippolet, mss-sp97, astm a182 gr.f304/304l, pe, 9000 0.75 inch, 0.5 inch , item sl no 555 i0555 latrolet, mss-sp97, astm a 105, bw 8.0 inch, std, 3.0 inch, s160 , item sl no 556 i0556 111-sp-40301, special reducer 42 x 36 inch with inclined angle 14 deg. line no.p-111-40301 , item sl no 557 i0557 lateral equal tee, size 1 x 1 , 30 deg. mnfstd,astma105, sw, 3000, , item sl no 558 i0558 lateral tee, 45 deg,manufacturers standard, astm a 105, sw, 3000, 1.0 inch x 0.75 inch, line no. 1-ct-111- 41302/41401-b43a-ie , item sl no 559 i0559 lateral un equal tee, size 1 x 3/4 , 30 deg. mnfstd,astma105, sw, 6000, , item sl no 560 i0560 lateral unequal tee, size 2 x 3/4 ,30 deg. mnfstd,astma105, sw, 6000, , item sl no 561 i0561 lateral unequal tee, size 2 x 3/4 ,30 deg. mnfstd,astma105, sw, 6000, , item sl no 562 i0562 lateral unequal tee, size 3 x 3/4 ,30 deg. mnfstd,astma105, sw, 6000, , item sl no 563 i0563 lateral unequal tee, size 3 x 3/4 ,30 deg. mnfstd,astm a403 gr.wp304/304l-s, bw, 6000, , item sl no 564 i0564 lateral unequal tee, size 6 x 3 ,30 deg. mnfstd,astm a403 gr.wp304/304l-s, bw. , item sl no 565 i0565 lateral unequal tee, size 8 x 6 ,30 deg. mnfstd,astm a403 gr.wp304/304l-s, bw. , item sl no 566 i0566 lateral unequal tee, size 8 x 4,45 deg. mnfstd,astm a 234 gr.wpb, bw. => limited

Central Government And Public Sector

TRN :34432181 | 19 May, 2025

Tender Value : 0

Aurangabad - Bihar

Tender for procurement of material for unit 4 generator stator winding over hang portion strengthening and modification work - bus-bar spacer,bhel,thri 108/44,bus-bar spacer,02,bhel,thri 108/44,bus-bar spacer,03,bhel,thri 108/44,pol resin mat/sheet,bhel,thri 108/44,glass flat sleeve,bhel,thri 108/44,epoxy resin,cy205,bhel,turbo generator,hardener-hy 951,01391201066-00/67,bhel,enamel,red-2404,bhel,thri108/44,250mw,spacer,01350801042,bhel,thri108/44,flat sleeve,01391201066-00 & 68,bhel,glass tape,00005540083,bhel,thri108/44,fine mica glass,1350801+,bhel,thri108/44,fine mica powder,bhel,thri 108/44,acetone,tgemis 1/00 90,bhel,thw 210-b,mica ppr gls foil,0135+,bhel,thri108/44,gls rope acc. trtd,135+,bhel,thri108/44,chem hardener,hy 840,turbo generator,diluent c assy,1/00016,turbo generator,ring,01393401010-01/8,bhel,o-ring,01393401010-01/9,bhel,tg-60158,seal element,01393401010-01/18,bhel,sealing rect cord,01393401010-00/7,bhel,packing

Central Government / Public Sector

TRN :34437392 | 14 May, 2025

Tender Value : 0

Lakhimpur Khiri - Uttar Pradesh

Tender for gem bids for 3052 enamel synthetic exterior a under coating b finishing paint v3 confirming to is 2932 q3 ready mixed paint air drying red oxide zinc chrome priming v2 as per is 2074 q3 thinner for epoxy paints bhel q3

Central Government/Public Sector

TRN :34426960 | 16 May, 2025

Tender Value : 0

Dakshina Kannada - Karnataka

Tender for gem bids for polish metal brass , super mop refill , tape transparent 1 inch , candle wax , abrasive paper tape transparent 2 inch , antirust spray , wonder tape 2 inch , safety gloves , distilled water , hand wash liquid , cleaning liquid for utensils , scrubber with handle , brush with long handle , super mop refills , cloth sponge , cloth stocknite mutton cloth , duster cloth , brush sweeping hand , cotton waste , soap toilet , refill for automatic air freshener , distemper white , photocopier paper full scape , cleaning bar for utensils , rags cotton coloured , wiper long handle , disinfectant fluid phenoil , deodriser refill , chain in silver for call boatswain , wind socks , xerox paper a4 size 80 gsm , detergent powder , plastic mug , gash bag big size , napthalene balls , ncml solution oxalic acid , ncml solution thiourea , safety goggles , call boatswain , ncml solution teepol , ncml solution phosphoric acid , brown sheet laminated , rope polypropylene 6 mm isi mark , polythene bag 14x16x75 micron , polythene bag 14x20x75 micron , tray paint roller , tape measuring steel 15 mtrs in metalic case , cable tie 8 inch , cable tie 10 mm , halogen lamp 230 v , lugs brass , tape insulation 25 mm , interthane 990 signal green , interguard 269 epoxy primer red , interthane 990 white , thinner gta 220

Central Government/Public Sector

TRN :34428240 | 24 May, 2025

Tender Value : 0

Indore - Madhya Pradesh

Tender for gem bids for 1303 no polish no epoxy sm sc connectors no polish no epoxy mm sc connectors compatible toolkit for sc connectors

Central Government/Public Sector

TRN :34428712 | 16 May, 2025

Tender Value : 0

Mumbai - Maharashtra

Tender for gem bids for repair maintenance and installation of plant systemsequipments version 2 - manufacturing unit; strengthening of pipes tanks etc by using polymer based high build composite epoxy compound wrapping with glass fibre tape as per sow and quantum ..

Related Searched Keywords : epoxy grouting

List of epoxy grouting Tenders

Tender for procurement of consumable items insulating gaskets washers sleeves epoxy fibre glass material for 600 mw turbo generator /motor of unit 2 at 2x600 mw, sstpp, mppgcl, dongalia.

Tender for gem bids for 3052 enamel synthetic exterior a under coating b finishing paint v3 confirming to is 2932 q3 ready mixed paint air drying red oxide zinc chrome priming v2 as per is 2074 q3 thinner for epoxy paints bhel q3

Tender for gem bids for 1303 no polish no epoxy sm sc connectors no polish no epoxy mm sc connectors compatible toolkit for sc connectors

Tender for gem bids for repair maintenance and installation of plant systemsequipments version 2 - manufacturing unit; strengthening of pipes tanks etc by using polymer based high build composite epoxy compound wrapping with glass fibre tape as per sow and quantum ..

Get epoxy grouting Tender Alert...

Related Searched Keywords : epoxy grouting

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us