Filters

List of earth-excavation Tenders

List of latest earth-excavation Tenders in Indian Tenders. Click on any earth-excavation Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for earth-excavation Tenders.

All-Tenders (10)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :35763827 | 10 Nov, 2025

Tender Value : 2.94 Lacs

Dausa - Rajasthan

Tender for major repair work under state budget head at gups narayanpura - demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). random rubble stone masonry with hard stone in superstructure above plinth level and upto five level above 30cm. thick walls in :cement mortar 1:6 ( 1-cement : 6-sand).cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." stone kharanja : random rubble dry stone kharanja under floor. panting on doors & windows :- painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work p&f rigid pvc pipe (is:4985 mark) class ii(4 kg. /cm.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant 110mm dia wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr

State Government

TRN :35764287 | 10 Nov, 2025

Tender Value : 32.95 Lacs

Kozhikode - Kerala

Tender for demolishing stone rubble masonry cement concrete brick work and rcc work earthwork excavation random rubble masonry pcc rcc centering and shuttering conveying the newly casted slabs filling earth structural steel work plastering works etc 220 kv substation kaniyambetta - renovation and extension of control cable trench in yard

State Government

TRN :35765746 | 10 Nov, 2025

Tender Value : 4.90 Lacs

Jaipur - Rajasthan

Tender for demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). supply & stacking good soil of earth at site complete including loading unloading & transportation etc.good soil of earth filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :columns, pillars, posts and struts etc. centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.m20 grade nominal mix / design mix roviding m-25 grade concrete by using cement as per codal provision instead of m-20 grade design mix. providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating

Central Government/Public Sector

TRN :35770182 | 11 Nov, 2025

Tender Value : 29.80 Lacs

Panchkula - Haryana

Tender for gem bids for construction, excavation and area grading for ramp and industrial lift withcovered roof, earthfilling for floor including watering andcompaction up till 600mm above ngl, brickwork in class abricks in cc 1 is to 6 ratio for foundation plinth and parapetwall, rendering 12mm with 1 is to 4 ratio cement mortar, pcc hardstanding 75mm thickness in 20mm aggregate inmortar ratio 1 is to 4 is to 8 ratio, steel structure made withtreated ms steel section with min clear height of 4 point 60mtr and ridge height 6m, ppgi point 50mm walls withinsulation, ppgi galvalume 0 point 50mm roofing withridges and joint sealant complete in all respects withinsulation, shutters with covers rotatable handle and inbuiltlocking mechanism dimensions 5 into 5mt and 2 into 3 mtr, electrical wiring complete in all respects including switchessockets dbs etc as per requirement anchor or finolex or keior vguard, provision and installation of 100w led halogen, industrial fans for air circulation 600mm heavy dutycrompton wall mounted, provision and installation ofexhaust fans heavyduty 450mm complete in all respects, pressure driven centrifugal exhaust fans for roof, paint jobfor structural steel civil work storage racks and shutterscomplete in all respects, lightning conductor, kotaflooring finished rough

State Government

TRN :35744005 | 20 Nov, 2025

Tender Value : 0

Palghat - Kerala

Tender for excavation, sale and disposal of earth from the ponds by deepening at dhoni farm

Central Government/Public Sector

TRN :35753319 | 19 Nov, 2025

Tender Value : 13.78 Lacs

Mundra - Gujarat

Tender for gem bids for supply and installation of double arm pole , supply and installation of single arm pole , supply and installation of led street lights , supply and installation of garden bollard type pole and 15w led lantern , supply and installation of 100w colour flood light , supply and installation of 50w flood light , supply and installation of 1.5 sq.mm x 3c armoured cable , supply and installation of electrical pole junction box , supply and installation of 30a, 6 way close type connector , supply and installation of 6a, 240v single pole mcb , supply and fabrication of copper clamp by using 25x3mm copper strip , supply and installation of 1. 5sq.mmx3c pvc insulated and sheathed coper flexible cable , supply and installation of 25 mm pvc pipe , supply and installation of 10a, 2p, mcb in power house , supply and installation of 6 way mcb distribution board , supply and installation of 25mm steel wire reinforced pvc flexible pipe , supply and laying of 50mm upvc pipe for road crossing , supply and installation of miscellaneous items , labour charges for excavation of cable trench , excavation for pole foundation , construction of footing structure , applying cement primer , applying signal red paint , applying metal primer , applying aluminium paint , demolishing of existing 29 footing structure , labour charges for laying of pipes in road crossings and ug cable markings with red colour bricks , supply and installation of 2m modular switch board box with matching frame plate and cover plate , supply and installation of 3m modular switch board box with matching frame plate and cover plate , supply and installation of 4m modular switch board box with matching frame plate and cover plate , supply and installation of 6m modular switch board box with matching frame plate and cover plate , supply and installation of 8m modular switch board box with matching frame plate and cover plate , supplying and fixing 6a modular switch and socket on the existing modular plate and switch box including connections , supplying and fixing 3 pin 6a modular socket outlet, on the existing modular plate and switch box including connections , supplying and fixing 16a modular switch on the existing modular plate and switch box including connections , supplying and fixing 6 pin 16 modular socket on the existing modular plate and switch box including connections , supply and installation of 16a universal extension board , supply and installation of 1m modular electronics fan regulator , supply and installation of 4 way spn db with earth connection. , supply and fixing 6a mcb , supply of 300mm pvc dom exhaust fan for installation in power house in the existing opening , installation of 300mm exhaust fan , extra carpentry work including supply and fixation of 19mm plywood on the exiting and ss net fixation at the outer side of opening , supply and installation of 12w, round surface led light , supply and fixing modular angle holder , supply and installation of self ballasted 20w led lamp , supply of 1200mm ceiling fan , installation testing and commissioning of ceiling fan , supply and installation of rotational adjustable pvc street light wall mount stand , supply and installation of led street light 25w,230v,50hz ac inbuilt with surge protection circuit , supply and installation of single phase 230v ac, 2hp monoblock pump , supply and installation of single phase 230v ac, 2hp motor starter , supply and installation of 6.5kg or higher front load, fully automatic washing machine , supply and installation of washing machine trolly stand , supply and installation of good quality of gate light on main gate pillar , supply of domestic clothing iron , supply of good quality nylon flexible pipe for gardening purpose , long solar panel cleaning brush kit heavy duty , gi mounting arm with clamps for installation led street light , supply of pvc suction hose and other items as per atc clause 7.1

Central Government/Public Sector

TRN :35755212 | 19 Nov, 2025

Tender Value : 54.77 Lacs

Jammu - Jammu And Kashmir

Tender for gem bids for sitc, sitc crs radio station transmitter of 50 w fm set 1 plus 1 sitc of self supported transmission tower vhftransmitting antenna low loss feeder cable with nconnector studio monitor speaker on air broadcastconsole etc dynamic cardioid microphone portable solidstate field recorder headphones broadcast audioprocessor dummy load with connector extra lighteningprotection circuit 19 equipment rack ht 5 ft mtsequivalent work station with antivirus for 3 years audioediting software automation scheduling software licence condensor microphone with wind filter and arm stand audio distribution amplifier headphone distributionamplifier 10 kva online ups xlr 6 microphone junctionbox professional audio line cable professionalmicrophone cable xlr connecter male and female trsstereo connecter professional on air studio light digitalclock with time supply and fixing of work station table supply and fixing of vob table supply and fixing ofdiscussion table l shape supply and fixing of on air tableand side table supply and fixing of shoe rack supply oflow frequency acoustic treatment supply of acoustictreatment teak board skirting supply of observationwindow supply of sound proof door with frame chaukhatt supply of executive chairs revolving standard supply ofvisitor chairs revolving standard tv 56 inch standardled type ips panel sitc of split unit 10 tr for transmissionroom sitc of split unit 10 tr for lobby area supply andfixing of refrigent copper pipe with insullation shifting andinstallation of existing cassette units supply and fixing ofrefrigent conduit pipe 25mm pvc internet works sitc ofpatch cord ofc - 3 meter sc-lc sitc of pigtail ofc - 1meter sitc of cat-6a cable sitc of 19 inch 6 u rack sitcof lan system sitc of liu 12 port sitc of patch cord cat- bid number gem2025b6836990 dated 29-10-2025 bid document1 89 1 1 6 -1 meter, sitc of patch cord cat-6 -2 meter, sitc ofpatch cord cat-6 -10 meter, supplying and fixing io boxalongwith base and cover plate, sitc of cctv camera withnight vision - 5 mp, supply and fixing of cat-6 wire in pvcconduit, sitc of cctv camera, fire work sitc talk backslave station, sitc smoke detector with built in led, sitc 6kg powder type fire extinguishers, citc 2 kg powder typefire extinguishers, sitc addressable manual call pointcomplete as required., civil excavation works as per boq, cement work as pe boq, providing and laying in positioncement concrete of specified grade, centering andshuttering, steel reinforcement for r.c.c. work, smoothfinishing of the exposed surface of r.c.c. work, brick workwith common burnt clay, 12 mm cement plaster of mix, partition upto ceiling height, cement fiber board, woodwork frame of doors, windows, clerestory windows, structural steel work, polishing in high gloss matt finishmelamine, bright finished brass hanging type floor doorstopper, dismantling and refixing of existing false ceilingwith cove and design at all height, removing dry or oilbound distemper, water proofing cement paint, providingand applying white cement based putty, wall painting withacrylic emulsion paint, 2mm thick pvc mat finished on floorof approved design, sitc of vertical blinds, providing andfixing aluminum works, providing and fixing aluminumworks for windows, providing and fixing glazing, tubulartype universal door closer for aluminum, aluminum towerbolt, aluminum handle, electrical works wiring, wiring forlight point etc, wiring for circuit, supplying and fixingfollowing modular switch etc, supplying and fixing followingmodular switch socket, supplying and fixing followingmodular switchs, supplying and fixing modules, supplyingand fixing mcb db, supplying and fixing miniature circuitbreaker, supplying and fixing single pole blanking plate, frls pvc insulated copper conductor, frls pvc insulatedcopper conductor 2, frls pvc insulated copper conductor3, frls pvc insulated copper conductor, 4, sitc of 3x2.5 mmflexible wire for connection, wiring for group controlled, led 2x2 luminaire 36w, recess mounted led downlighter, wall fan with brush less direct current bldc motor, electrical earthingsitc crs radio station transmitter of 50 w fm set 1 and 1total 2, sitc of self supported transmission tower, vhf transmitting antenna, low loss feeder cable withn connector, studio monitor speaker, on air broadcastconsole etc, dynamic cardioid microphone, portable solidstate field recorder, headphones, broadcast audioprocessor, dummy load with connector, extra lighteningprotection circuit, 19 equipment rack ht 5 ft mtsequivalent, work station with antivirus for 3 years, audioediting software, automation scheduling software licence, condensor microphone with wind filter and arm stand, audiodistribution amplifier, headphone distribution amplifier, 10kva online ups, xlr 6 microphone junction box, professional audio line cable, professional microphonecable, xlr connecter male and female, trs stereoconnecter, professional on air studio light, digital clockwith time, supply and fixing of work station table, supplyand fixing of vob table, supply and fixing of discussiontable l shape, supply and fixing of on air table and sidetable, supply and fixing of shoe rack, supply of lowfrequency acoustic treatment, supply of acoustic treatment, teak board skirting, supply of observation window, supply of sound proof door with frame chaukhatt, supply ofexecutive chairs revolving, standard, supply of visitor

Corporations / Associations / Others

TRN :35723107 | 06 Nov, 2025

Tender Value : 2.86 Lacs

Tambaram - Tamil Nadu

Tender for providing open gym equipment - earth work excavation for foundation in all kinds ...lling the sides with excavated earth etc. complete supplying stone dust and filling in regular laye...ting etc. complete for foundation, basement, etc. plain cement concrete work 1:4:8 (1 cement, 4 crus...etc. complete for foundation, etc. upto basement brick work with fly ash bricks of size 230mm x 110m...ick walls upto basement (upto 1m high above g.l.) plastering with cement mortar 1:4 (1 cement and 4 ...sand) 12mm thick including curing, etc., complete. painting the new plastered walls with two coats of...ion and the durability period should be 3 years... paving the flooring with cement concrete tiles h...g pointing with colour cement etc., complete,(isi) supply and fixing of push pull up chair promotes ...st / foot paddle for long lasting life at dr. ambedkar play ground in division - 92, unit - 20, zone - vii

Central Government And Public Sector

TRN :35704373 | 08 Nov, 2025

Tender Value : 26.25 Lacs

Leh Ladakh - Jammu And Kashmir

Tender for earth work excavation, providing and lying cement concrete, lying random rubble stone masonry, ordinary stone for core filling, lying stone slate in cement mortarproviding wooden budloo wood and etc providing skilled / unskilled manpower under s/r to lonpo castle and wanla monastery

Central Government/Public Sector

TRN :35672061 | 17 Nov, 2025

Tender Value : 0

Ernakulam - Kerala

Tender for concrete dismantling, earth work excavation and yard concreting at ammonia plant in fact fert. udyogamandal.

Related Searched Keywords : earth excavation

List of earth-excavation Tenders

Tender for excavation, sale and disposal of earth from the ponds by deepening at dhoni farm

Tender for earth work excavation, providing and lying cement concrete, lying random rubble stone masonry, ordinary stone for core filling, lying stone slate in cement mortarproviding wooden budloo wood and etc providing skilled / unskilled manpower under s/r to lonpo castle and wanla monastery

Tender for concrete dismantling, earth work excavation and yard concreting at ammonia plant in fact fert. udyogamandal.

Get earth excavation Tender Alert...

Related Searched Keywords : earth excavation

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us