Filters

List of data-sheet Tenders

List of latest data-sheet Tenders in Indian Tenders. Click on any data-sheet Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for data-sheet Tenders.

All-Tenders (15)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

corporations/Associations/Others

TRN :35381131 | 25 Sep, 2025

Tender Value : 16.07 Lacs

Balasore - Orissa

Tender for earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the engineer-incharge. filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the engineer-incharge. cement concrete (1:4:8) with 4cm size h.g.b. hand broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement t&p required etc. complete as per the direction of the engineer-incharge. brick work with fly ash brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the engineer-incharge. 12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. r.c.c. work in c.c. (1:2:4) including hoisting & laying & curring for 28 days using 12mm. size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. "rigid smooths centering and shuttering for rcc works including false work and dismentgalling then after casting including cot os materials complete. (a) rcc walls and fins including attached pillasters" labour charge for m.s. reinforcement for r.c.c. work including cutting, bending & typing the grills & placing in position including cost of binding wire 18 to 20 guage per qntl. including cost of hysd still bar (fe 415/ fe 500) filling the foundation and plinth with excavated material as directed by the engineer-incharge. finishing wall with water proofing cement paint of approved shade two coats to new work to give an even shade including cost of cement paints. etc. complete as per the direction of engineer – in charge. writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the engineer-incharge. supplying of 160 mm dia unplasticised rigid upvc pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies conforming to is - 4985 / 2000 of bis - amendment - 2 read with table - 1 of is - specification bearing isi marks for working pressure ci - i upvc pipe to withstand pressure of 2.5 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest amendment of is - 4985. it includes the cost of sockets in case of plain ended pipe. pdi test ( both pre & post inspection ) are to be condcuted and should be marked on body of each pipe and report is to be obtained from cipet, bhubaneswar necessary approval of authority including transportation to work site in complete shape. fitting of un plasticised 160mm dia pvc pipe for following inside dia mtr. for all classes of pipe including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of pvc tee for outlet and pvc shaddle and pvc riser nipple for fitting air valve, equal tee etc. complete including conveyance pipe from village to worksite and testing of pipe line etc. complete as per the direction of the engineer-incharge. 7.5 hp / 5.6 kw submersible pumpset corpled with totally enclosed water cooled squirrel case induction motor with delivery discharge 1100 lpm at 36 meter head with s/s cable, clamp clip etc. suitable for operation at 415v + -15%, 3 phase 50hz a.c. power supply as per particulars in annexure. labour charges for installation of 7.5hp motor including fitting & fixing of base frame, fitting & fixing suction and delivery pipe to motor, nr valve, foot valve, sluice valve and other fitting materials including cutting, welding and construction of supporting pillar etc. complete as per the direction of the engineer-incharge. 100 mm ø nominal bore g.i. pipe having wall thickness 4.5 mm electrical resistance welded of medium class confirming to is - 1239 (pt-1 of 2004) with socketed at one end and the other end protected with plastic thread protector. the socket confirming to is-1239 (pt-ii/1992) with latest amendmewnts in random length of 4 to 7 mtrs. each pipe should bear isi certification & manufacturers name / trade mark. 100 mm dia g.i. bend is no.1239(part-ii/1992) 100 mm dia g.i. flange is no.6392 / 1971 cost of tw safe guard for stand includng labour charge 100mm dia gi socket is 1239 (part-ii/1992 ) cost of 100 mm dia ms t/w clamp cost of 100 mm dia c.i reflux valve(nr) 25 mm ø air release valve with saddle & raiser pipe. the air release valve shall confirm to is 14845 with isi mark. 160 mm x 160 mm x 160 mm ø pvc equal tee (w.p. 4 kgf/cm2) confirming to is-4995/1988 with latest ammendment 160 mm ø pvc end cap (w.p. 10 kgf/cm2) confirming to is-4995/1988 with latest ammendment 5/8 x3" nut bolt & foundation nut bolt as per is specification 1/8" thick rubber insertion as per is specification cost, supplying of 160mmx160mmx110mm dia weldless g.i.tee (3.6mm thickness) with bend, closing and opening arrangement of reputed brand including all cost, conveyance, cess etc complete but excluding cost of gst cost of 160mm×110mm dia pvc reducing socket. cost of 12 mm wire rope control pannel with automatic star delta starter, sheet steel enclosure suitable for operation of squirrel cage induction motor up to 10 hp with 16 amp (ac -3) duty contractor at 415 volt+6%-15%, 3 phase, 50 hz ac supply with over load relay range 6.00 to 9.50 amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 v. the starter should provide dependable protection against over load and single phasing fitted with volt meter,ameter,mcb in complete shape including indicator lamp 63 amp main switch triple pole & neutral of voltage range 440 volt of re-wirable fuse and shall confirm to is 4064 part i & with isi mark. 3 x 10 sqmm tarpodar cable xlpe (cross link polyethylin) conforming to is: 7098 (part-ii) including laying below .9mtr. of the ground and filling the excavated materials including watering and ramming. cost of empty outdoor irrigation panel board (size 0.45mx0.25mx1.20m) of 18 swg (cold rolled) m.s. sheet with one coat of red oxid primer and two coats of smoke gray / navey blue enemel paint on both side ( inside & outside) suitable to mount 3 phase starter, main switch and capacitor inside the pannel board vertically over 18 swg m.s. sheet. the pannel board should be provided with locking arrangement and have grover on rear side for fixing motor hood. the danger board should be fixed on the to of the pannel door. 2.50mm2 submerssible (3 core) flat cable isi mark of reputed brand of isi specification including all cost, conveyance, cess etc complete but excluding cost of gst construction of 3 phase 11 kv line as per rec standard confirming to ie rules 1956 with 300 kg 9 m long psc pole with 80 sqmm aaac , 11 kv "v" cross arm, with required no.of 11 kv t & c disc. insulators in tension point & 11 kv pin insulators, couping & padding of poles. danger board at each pole, anti climbing devices, stay set at bending point & double stay at end point with 18 mm g.i.h.t.stay, concreting of stay with anchor plate, guarding at road crossings etc. including cost of all materials, labour transportation,inspection & commissioning etc. complete. construction and erection of 11 /0.4 kv , 25 kva double pole mounted substation star rated confirming to re rules 1956, mounted on 2.44 mtr. long structure, supported in 300 kg 9 mtr long psc pole,transformer hard channel & top channel made of 2.8 m long 100 x 50 x 6 mm m.s.channel, transformer belting on 2.80 m long 50 x 50 x 5 mm m.s.angle, (all rec spn std.f-3) with all accessories like 3 pole 11 kv hg fuse(f-5)& a.b.switches(f-9) both mounted on 2.8 m long 75 x 40 x 6 mm m.s.channel and supported by 1.0 m long 50 x 50 x 5 mm m.s.angle, with 3 no. 11 kv lightening arrestors & distribution box for 25 kva s/s, g.i.pipe earthing with 25x5mm g.i.flats including cost of 25 kva 11/0.4 k.v.transformer , 35 sqmm 3 1/2 core pvc cable - 40 mtr couping & padding of poles, danger board at each pole, anti climbing devices & all other necessary fittings i.e required size nuts & bolts, brackets, cable, cable sockets, barbed fencing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. construction of boundry wall fancing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc for substation as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. electrical installation with electrical materials such as pvc tape, ampere tape, 7/20 pvc copper wire, 3/20 pvc copper wire, g.i. flexible conduite pipe, no.6 g.i. wire, copper cable socket, g.i. socket and flange and petty materials required for electrical installation including fixing of td cable inside the earth trench as per direction of engineer-in-charge.. electrical earthing with digging earth pit of size (2 ft x 2 ft x 3 ft ) and using 1/2 '' g.i pipe ,no -6 g.i wire ,cable socket ,flange , carcoal, salt etc. as per the direction of the engineer-incharge. 4 kvr power shunt capasitor 4.0 mm 2 pvc single core copper wire labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level in alluvial soil strata by mud rotary rig drilling as required to suit the site condition as per the direction of engineer in charge including use of own rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of finished bore suitable for lowering (minimum 400 mm dia.) of 200mm dia gi/pvc pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. gi/pvc casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion. for drilling of 200 (8”) dia pipe. from 0 mtr. to 100th meters supply of all labour & t&p for lowering the following sizes of pvc pipes with or without slotted pipes as per the necessity from ground level & fitted & fixed up in perfectly verticaly position inlcuding cutting & threading pipe and slotted pipe and fixing all jointing materials etc. complete. and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above excluding cost of fitting & joining materials. 200mm dia pvc/gi casing pipes cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour as per the direction of engineer-in-charge. supplying all materials,labour t & p for packing the bore with washed gravel size (p-6) arround the well screen and pipes in good quality including cost of gravel ,conveyance,royality,etc complete as per direction engineer-in-charge. (100m depth) =0.786 x (0.4² - 0.2²) x 100mtr = 9.43 say 9.5 cum supplying all labour tools ,plant and grouting with cement bentonite slurry for saline sealing in the bore arround 200mm dia pvc casing pipe etc all complete as per direction of engg in charge(including cost of cement and bentonite) labour charges for cutting transverse slot on 200 mm dia pvc pipe with slot size 1.5 mm as per specification threading charges 8" pvc bail plug 8" pvc threaded end cap pn-10 200mm x 12" long pvc shot piece 200mm ø schedule 80 casing pipe (as per epm rate order no.2877 dated 05.07.2025) water sample test if required

Central Government/Public Sector

TRN :35345555 | 14 Oct, 2025

Tender Value : 0

Samastipur - Bihar

Tender for supply of traction center machined for vb/ts, as per drawing: drg no. d-a675uv2- 137352 rev-01., packing instruction: detail of revised packing instruction of traction center to pl no. 33500113 1. the traction center to pl no. 33500113 is to be properly wrapped in biodegradable transparent plastic sheet separately and separated with corrugated paper so that it should not rub during transportation. 2. the packing shall be such that all the machined surface shall be properly protected against rubbing /impact/scratches with each other with any mode of transportation i.e wagon/truck/trailers etc. 3. the traction center to pl no. 33500113 should be packed in 15 nos in iron box pallet returnable / wooden box prepared by firm suitable for said items. the items should be separated by using suitable eco friendly cushioning material to avoid rubbing. the packing shall be such that transit damage if any shall be at the cost of supplier till unloading in shell depot. 4. each packing should have an identification showing p.o. no., pl no. description, drawing no./spec., quantity, firms name & address and dispatch detail etc. note:- iron box pallet shall be returned to firm when empty. 5. in addition to this, the following instructions can be considered to be added to the packing instructions for ensuring proper identification and linkage of the items against the purchase orders:- 5.1 the item or its packing shall carry a qr code containing the details as listed below:- a. name of the manufacture b. purchase order number c. purchase order date d. unique serial number or lot number for bulk items of the manufacturer or e. date of manufacture f. delivery challan no. g. delivery challan date 5.2 the qr code shall be as per iso/iec 18004 model2 and the data shall be available as xml using the tags detailed above. 5.3 in case the above details are not available or the qr codes are not readable, the supplied material is liable to be rejected..

Central Government/Public Sector

TRN :35333789 | 22 Sep, 2025

Tender Value : 0

Visakhapatnam - Andhra Pradesh

Tender for gem bids for procurement, pencil box hb and apsara, eraser box, sharpener, markertemporary black red blue, blue ball pen, black and red ballpen, violet and pilot pen, tracking sheet, sketch pen, colour papers light green pink red, lamination sheets, feviquick, whitener, small stapler, vip leaf folder forbridge card and communication data book, highlighter, file tag, ink pad, cd marker blue and black, box file, gumbottle 200 ml, envelope a3 size, envelope a4 size, envelope small size, paper cutter, colin, stapler pin small, stapler pin big, office file, envelope sealing red colourcandle, cello tape 1 and 2, cello tape dispenser, gluestick, l shape folder, register no20, register no18, register no12, signal folder, signal box folder, brownsheet, book cover sky blue yellow pink, transparent sheetfor books, lamination file, pin for board, ribbon redyellow white green blue, seizer medium

State Government

TRN :35292469 | 26 Sep, 2025

Tender Value : 15.00 Lacs

Anand - Gujarat

Tender for gem bids for paper-based printing services - printing with material;secured degrees with variable data; offset uv printing, paper-based printing services - printing with material;secured mark sheets with variable data; offset uv printing

Central Government/Public Sector

TRN :35285132 | 25 Sep, 2025

Tender Value : 0

Visakhapatnam - Andhra Pradesh

Tender for gem bids for toner cartridges / ink cartridges / consumables for printersq2 specific terms and conditions1. genericoption clause: the purchaser reserves the right to increase or decrease the quantity to be ordered upto 25 percent of bid quantity at the time of placement of contract. the purchaser also reserves the right toincrease the ordered quantity up to 25% of the contracted quantity during the currency of the contract atthe contracted rates. the delivery period of quantity shall commence from the last date of originaldelivery order and in cases where option clause is exercised during the extended delivery period theadditional time shall commence from the last date of extended delivery period. the additional delivery7 / 12 time shall be increased quantity original quantity original delivery period in days, subject tominimum of 30 days. if the original delivery period is less than 30 days, the additional time equals theoriginal delivery period. the purchaser may extend this calculated delivery duration up to the originaldelivery period while exercising the option clause. bidders must comply with these terms.2. buyer added bid specific atcbuyer added text based atc clauses1.material: procurement of printer cartridges .please submit gem bid document duly stamped and signed .2.delivery schedule: as per bid document. however, rinl-vsp reserves the right to revise the delivery schedules, depending on vsp s production requirements and storage capacity, without any change in price, terms and conditions of po.3. rinl reserves the right to negotiate with the tenderers without prejudice to their quoted price.4.inspection: inspection at r.i.c. central stores department, r.i.n.l., visakhapatnam steel plant, visakhapatnam-530031, andhra pradeshtest certificate not applicable5.number of sources: 01 one :the intended number of source is one . however, the bid quantity may be split in two sources as per the mii and mse policy of buyer; subject to purchase preference to eligible mses and make-in-india suppliers; subject to matching l1 price by any of the tenderers from l2 onwards in the order of ranking. if none of the l2 tenderers onwards matches the l1 price, then full tendered quantity may be ordered on the l1 tenderer.6.purchase preference: purchase preference will be accorded to micro & small entrepreneurs mses/ssis and make in india class-1 local suppliers mii class-1 as per the prevailing orders / policy of govt. / rinl, subject to fulfillment of eligibility and submission of requisite / stipulated documents in support ofeligibility and subject to matching of l-1 lnip price. 7.conditions for availing benefit is detailed under cl.no. 8.0 of detailed terms and conditions of invitation to supply tender ref vsp s website: www.vizagsteel.com.8.for the purpose of this bid, the order of preference public procurement policy ppp & make in india mii is as under:a local mses - till the total quantity on local mses equals or exceeds 50%.b aimses - till the total quantity on aimses including local mses equals or exceeds 25%.c mii class 1 local suppliers - till the total quantity on class 1 suppliers equals or exceeds 50% d others including mses/non mses/ mii/ non mii in the order of ranking9.price firmness: price shall be quoted in rs. per no. for supply on for vsp stores basis inclusive of material price, freight, transit insurance, taxes / gst, etc. and the price finalized shall remain firm till completion of supplies. gst shall be applicable on all penalties like liquidated damages, penalties for variation in material specification, risk purchase recovery, shortages, penalty for late lifting/ delivery, forfeiture of emd / pg bond/ security deposit etc if levied by the purchaser on the seller/supplier and shall be recovered along with gstapplicable thereon. the purchaser shall issue tax invoice in favour of the seller/supplier for such recoveries. 10. not-withstanding anything specified in this tender document, rinl at its sole discretion, unconditionally and without having to assign any reason, reserves to itself the right: to accept or reject the lowest priced tender or any other tender or all the tenders; to accept any tender in full or in part quantity; to reject the offers not conforming to the tender terms and to accord purchase preference to public sector undertakings wherever applicable as per government policy/ guidelines. to extend purchase preference to local & non-local ssis / mses micro and small enterprises, subjectto submission of documents as stipulated. 8 / 12 .terms of payment: 100% payment of the value of each consignment shall be made against submission of bills along with vsp s acceptance garn goods acceptance / rejection note. payment shall be released on 60th day 21st day for local micro and small enterprises and 45th day for non-local mses, subject to submission of documents as stipulated for availing mse benefits from the date of acceptance of material at vsp i.e. garn date.payment shall be made by neft/rtgs mode or such other mode of electronic fund transfer offered by banks. tenderers must furnish the required bank account details to vsp in prescribed proforma so that the same can be updated in vsp s database. 12.emd and performance guarantee bond: not required 13.right to accept/reject offers:rinl/vsp does not pledge itself to accept the lowest priced offer or any other offer and reserves to itself the right of accepting the whole or any part of the tender/offer or portion of the quantity tendered and the tenderers bidders shall supply the same at the rate quoted.14.liquidated damages: shall be as per gem gtc clause no. 15. iii with following addition/modification: subject to a maximum of 10% of value of such consignments, excluding taxes. for levy of ld in case of late delivery, date of receipt of material by rinl-vsp stores along with necessary documents shall be considered as date of delivery, subject to acceptance of material by rinl-vsp after inspection. 15.establishment of credibility of non-enlisted/non-assessed vendors: if a tenderer who responds to this bid is presently not enlisted with rinl-vsp as an approved vendor, and/or those tenderers for whom vendor assessment is not done by gem for the category printer catridges., has to upload the following documents in the offer/bid in gem:notarized statutory manufacturing / service industry registration certificate, i.e., empartiiissuedbydic/nsicregistration certificate / udyog aadhar memorandum for the same/similar tendered itemsfor mses.ornotarized copy of certificate of registration of shops and establishments for a dea1er/agent/trader etc.ornotarized copy of certificate of incorporation along with memorandum and articles of association of the private/public limited companies.ii notarized copy of proprietary/partnership deeds in case of proprietary/partnership firms.iii notarized copy of gst registration certificate and pan card copy in the name of company in case of limited companies or in the name of individuals in case of proprietary firms.iv self-attested financial worth and audited financial statements for the last three 3 years.v self-attested copies of purchase orders/contracts for the same or similar tendered item/s.vi self-certified iso certificate, if any.vendor assessment report has to be submitted by the bidders for whom vendor assessment is already done by gem for the category printer catridges16.bidder shall have minimum 20% domestic value addition class-i or class-ii local supplier as per orderno. p-45021/2/2017-pp be-ii dt. 04.06.2020 of dpiit, ministry of commerce, goi and shall submit declaration as per format at annexure-ii of this atc along with their techno-commercial bid. 17. documents to be uploaded: by the bidder/seller during bid participation in gem:i this bid document, specification sheets, drawings, corrigendum if any, etc. duly signed and stamped by bidder on all pages, confirming acceptance.ii bidders must select the mse option to claim mse benefits while submitting the offer on gem itself and upload their udyam registration for same

Related Searched Keywords : data sheet

List of data-sheet Tenders

Tender for gem bids for paper-based printing services - printing with material;secured degrees with variable data; offset uv printing, paper-based printing services - printing with material;secured mark sheets with variable data; offset uv printing

Get data sheet Tender Alert...

Related Searched Keywords : data sheet

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us