Filters

List of da-regulator Tenders

List of latest da-regulator Tenders in Indian Tenders. Click on any da-regulator Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for da-regulator Tenders.

All-Tenders (27)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :35783524 | 24 Nov, 2025

Tender Value : 0

Agartala - Tripura

Tender for gem bids for utensils, steel plates, steel glasses, steel bowls, pressure cooker 5litters, pressure cooker 3 litters, aluminium gamlacontainer with lids 26 inch diameter, aluminium saucepans- patila with lids 24.5 inch diameter, aluminium saucepans -patila with lids 20 inch diameter, steel bucket, aluminiumdekechi - pot - handi with lids 24 inch diameter, aluminiumdekechi - pot - handi with lids 15 inch diameter, spoonsand ladles ghajra - perforated iron ladle, spoons andladles palta flat iron spatula, spoons and ladles iron dalghutni, spoons and ladles for rice serving, spoons andladles for dal serving, spoons and ladles for vegetableserving, rice strainer - jhajhri, iron vegetable cutter dau, wooden chaklabelan, iron tawa, iron kadai, stainless steeljug, plastic buckets 20 litres, plastic buckets 10 litres, plastic mugs, plastic dustbins small, big dustbin forkitchen waste - solid, big dustbin for kitchen waste - liquid, weight machine, commercial iron gas oven set with pipeand regulator, trolley for carrying gas cylinders and snacks, door lock with 3 keys, key hanging board

State Government

TRN :35786673 | 18 Nov, 2025

Tender Value : 10.02 Lacs

Srikakulam - Andhra Pradesh

Tender for repairs and replacement of damaged shuttering arrangement for cross regulator km 15 466 of right main canal near syamalapuram village of l n peta mandal

Central Government/Public Sector

TRN :35787826 | 15 Nov, 2025

Tender Value : 0

Jammu - Jammu And Kashmir

Tender for gem bids for amp socket with gang box, acrolic sheet, aggregate 20mm, aldrop bolt, aluminium door, aluminium strip, babyconcertina coil, bathroom tiles 1x1, bib cock, bib cockbrass, binding wire, black fill compound, black paint, black plastic ldpe, blue paint, bow handle, bricks, brownpaint, bulk head fitting, casing and caping, ceiling fanwith regulator, ceiling rose, cement, cgi sheet, cgisheet 10 ft, cgi sheet 12 ft, cgi sheet 13 feet, cgi sheet8 ft x 3 feet, ci cover 300x 300 for lc, cistern tank 10 ltr, cloth hook, concrete block, copper pipe, copper prongand glove, cousion sheet with plywood, cover water proof9x12ft, cover water proof 9x9, cushion for double bunkbed, mattress with ply, distemper, door double shutter, door stopper, double bunk with mattress, elbow, ewc, fevicol, fire extinguisher 1 kg, floor tiles, flush tank 10ltr, flushing pvc pipe, gang box, gi strip, gi wire, glassputty, handjet spray, hdpe jerrican 35l, hdpe sand bag, hdpe trapaulin, hellow block, hesco basket, hydrolicdoor closer, insulation tape, iwc, j hook, karandi, laip, lc prong, lc set, ldpe film, led bulb 9w, led tubelight fitting 20w, looking mirror with frame 600mm x450mm, m seal, matress with plywood, mattress for buckbed with ply, mcb 32 amp, ms shoes rack, nails 1 inch, nails 2 inch, nails 3 inch, nails 6 inch, net mosquito wirewith nut bolt fmn, nipple 20mm 4 inch, paint og, p trap 4inch dia, paint brush 4 inch, paint brush 75mm, paint darkbrown, paint green, red paint, paint red oxide, whitepaint, paint, paint yellow, pbs roll 20mmx1m, pipe pvc 4inch dia, plastic chair, plug, ply with cushion for bunk, plywood for false ceiling, plywood 08mm, plywood 10mm, plywood 18mm, plywood 19mm 3x6, plywood 19 mm x 3 ft, plywood 2 x 10mm, plywood, plywood with cushion, plywood 8 mm 3x6, plywood 8 mm x 3 ft x 8 feet, plywood8 feet, primer, putty, pvc casting and capping, pvcelbow 4 inch dia, pvc solvent, pvc wire 1.5 sqmm singlecore, pvc wire 2.5 sqmm single core, sand bag, sand fine, security light 45 w, self tapping screw 100mm long, service wire 10sqmm, shade conical, shower rose steel, syntax water tank 1000 ltrs, water tank 500ltrs, steelalmirah, steel almirah, socket 20mm, srt 6 feet long, srt 8 ft, srt 10 ft, steel chair with cushion, steel tab20mm long body, steel tab 15mm long tab, stop cock20mm, switch board 5 point, water tap, tarpin oil, terminal lightening conductor, thinner, tiles 2 x 2, toiletseat, tuffen tape, urinal port, wall mounting fan, wcwestern type, welding rod, white cement, window glass, window glass size 43cmx36cm, window glass size20cmx22cm, wooden ply 6 mm, 15 amp board, 5 ampboard, tube light, bulb 9 watt, celling rose, secure box, angle holder holder, piano type switch, 2.5 mm copperwire, 1.5 mm copper wire, two core wire 16 mm, mcb 16amp, dp mcb 63 amp, mcb box 04 way, casing capping, pvc box three way, pvc box four way, change over 200amp, pvc gitti 2inch, star screw 2inch, pvc gitti 2 inch, star screw 4 inch, insulation tape role, verified tiles600mmx600mm, drainage mesh 1 ft x 2 ft, girder ismb

Central Government/Public Sector

TRN :35789290 | 11 Nov, 2025

Tender Value : 19.67 Lacs

Imphal - Manipur

Tender for gem bids for mcb 10 amp sp with enclosure box mild steel mcb 20amp sp 240 volts mcb 32 amp dp 240 volts mcb 40amp dp 240 volts led batten surface 4ft long 18woutput 1600 lumens per watt with suitable powder coatedframe end caps and connector led bulb 9w 220-240 volt led bulb 11w 220-240 volt security light fitting for 200watt led batten holder bakelite angle type isi marked modular switch piano flush type 6 amps 240 volts singlepole one way isi marked pvc sheathed unarmouredstranded copper conductor cable of size 25sqmmconforming to isi marked 90m roll pvc sheathedunarmoured stranded copper conductor cable of size1sqmm conforming to isi marked 90m roll pvc sheathedunarmoured stranded copper conductor cable of size15sqmm conforming to isi marked 90m roll pvc switchboard 4inch x 4inch conforming to is pvc switch board6inch x 4inch conforming to is change over switch 32amp 4 pole change over switch 63 amp 4 pole m pvcswitch board 8inch x 10inch conforming to is waterdispenser 20 ltr capacity with bottle voltas automaticchange over 63 amp socket 3oblique 6 pin 5 oblique 15amp 240v isi marked ceiling fan 1200mm sweep withelectronic regulator conforming to is socket 3 oblique 5pin 5 amp 240v isi marked flexible cable twin twisted rollof 90 mtr 23oblique 0point0040 conforming to is pedestalfan 400mm sweep condenser 25 mfd for ceiling fan isimarked 2 core cable aluminium size 10 sqmm conformingto isi marked 90m roll m 2 core cable aluminium size 6sqmm conforming to isi marked 90m roll pvc conduit pipe20 mm isi marked switch piano 5 amp 240v isi marked switch socket combination 15 amp 240v with gang box isimarked switch socket combination 5 amp 240v with gangbox isi marked wall mounted fan 400mm sweep bid number gem2025b6848426 dated 01-11-2025 bid document1 101 0 0 conforming to is, mcb 32 amp sp 240 volts, , switch piano15 amp 240v isi marked, exhaust fan 400mm, mcbdistribution box 6 way spn, mcb 63amp tpn 240 volts, , change over switch 100 amp four pole, , insulation tape 3oblique 8inch wide 9 mtr roll, mcb 16amp sp 240 volts, m, gi pipe 20mm bore 6m long medium grade, , gi pipe 15mmbore 6m long medium grade, , gi reducer tee 20 x 15mm isimarked, gi tee 15mm bore isi marked, gi tee 20mm boreisi marked, gi socket 20mm bore isi marked isi marked, gi socket 15mm bore isi marked isi marked, gi elbow15mm bore isi marked, gi elbow 20mm bore isi marked, gi nipple 20mm bore 100mm long, gi nipple 15mm bore100mm long, pvc swr pipe 110m dia 3m long with socketend isi marked, pvc swr pipe 75m dia 3m long withsocket end isi marked, pvc swr tee 75 mm bore, isimarked, pvc swr tee 110 mm bore, isi marked, pvc bibcock 15mm, rivit machine, drill bit 6mm, tile cuttermachine make bosch, iron cutter blade 4, tile cutter blade4, hand grander 850w 12000rpm, cp cast copper alloypillar cock 15mm bore, wooden cutter blade 4inch, 2 hpmotor isi marked, pp-r pipe tee 15mm, fly catcher, geyser 10 ltr, spray machine, kitchen sink, pp r pipeelbow 15mm, pp r pipe union socket 20mm, ppr pipeunion socket 15mm, ppr pipe reducer socket 15 obliqu 20, hand z spray, cp cast copper alloy stop cock angle type15mm bore, mild steel corrugated galvanised ppgi sheet12ft x 3ft, 0.63 mm thick isi marked, mild steel corrugatedgalvanised ppgi sheet 8ft x 3ft, 0.63 mm thick isi marked m, mild steel corrugated galvanised ppgi sheet 10ft x 3ft, 0.63 mm thick isi, mild steel corrugated galvanised cgisheet 8ft x 3ft, 0.63 mm thick isi marked, mild steelcorrugated galvanised cgi sheet 6ft x 3ft, 0.63 mm thick isimarked, acrylic sheet 3mm thick for window panes 6ftx4ft, plywood commercial bwr grade isi marked of size 4ft x 8ft, 12mm thick, m seal 100 gm, chunna, teflon tape 3oblique8inch wide 10 mtr roll, membrane 4040, 20inch x2ft jumbo filter, geru, plywood commercial bwr grade isimarked of size 3ft x 6ft, 12mm thick, gi binding wire1.20mm dia, welding rod pkt of 100 electrodes, measuringtape 50 mtr, tripple layer hdpe water storage tankcylindrical vertical with closed top 500ltrs capacityconforming to is specification, tripple layer hdpe waterstorage tank cylindrical vertical with closed top 1000ltrscapacity conforming to is specification, tripple layer hdpewater storage tank cylindrical vertical with closed top 200ltrs capacity conforming to is specification, self tappingscrews with ppdm washer 75mm long, brass screwwood 6x 75mm 200 nos, pvc frame looking mirror 15inch x 18inchselect quality glass, cp towel rail 600 mm long 20mm diawith bracket, app water proofing membrane 3 mm thick 1mwide 10 m long, painting brush 25mm standard quality, painting brush 50mm standard quality, painting brush75mm standard quality, painting brush 100mm standardquality, synthetic enamel paint high gloss superiour qualitywhite colour, synthetic enamel paint high gloss superiourquality green colour, synthetic enamel paint high glosssuperiour quality og colour, synthetic enamel paint highgloss superiour quality yellow colour, synthetic enamelpaint high gloss superiour quality red colour, coarseaggregate 20mm obliqu 40mm obliqu 63mm dimapur sandconforming to is 383, 1978., mild steel wire nails 2inch, mild steel wire nails 1inch, mild steel wire nails 6inch, emery cloth 100mm wide various grades, mild steel slidingdoor bolt 250mm, floor door stopper aluminum 50mm, s //bid details2 / 101 steel hinges 100mm, taping screw 1inch with washer, taping screw 3inch with washer, brick 9 x4.5x3 inch, coirmattress of size1.83m x 0.9m x 75mm thick comprising of50mm thick high density coir, hdpe sand bags of size14inch x 36inch, weight not less than 60 gms., red cushionchair, thinner for paint, ordinary portland cement 43grade in hdpe bags of 50kg each, confirming to is269, 1976, hesco bastion bags of size 0.60m x0.45mx0.60m, oil filter genr set 30 kva, fuel filter genr set 30kva kiloskar, air filter genr set 30 kva kiloskar, fan beltgenr set 30 kva kiloskar, engine mounting pad genr set 30kva kiloskar, fuel pipe line filter to pump 19x19 genr set30 kva kiloskar, fuel feed pump genr set 30 kva kiloskar, tapped cover gaskit genr set 30 kva kiloskar, injector genrset 30 kva kiloskar, cylinder head gasket genr set 30 kvakiloskar, battery 12v 120ah, battery lead, fuel tank capgenr set 30 kva kiloskar, oil filter genr set 15 kva kiloskar, fuel filter genr set 15 kva kiloskar, air cleaner filter genrset 15 kva kiloskar, fan belt genr set 15 kva kiloskar, engine mounting pad genr set 15 kva kiloskar, fuel pipeline filter to pump genr set 15 kva kiloskar, fuel pumpassembly genr set 15 kva kiloskar, tapped cover gaskitgenr set 15 kva kiloskar, avr genr set 15 kva kiloskar, push button genr set 15 kva kiloskar, exhaust fan genr set15 kva kiloskar, battery 12v 88ah, fuel filter pairs genrset 30 kva kiloskar, oil filter elements genr set 30 kvakiloskar, silencer genr set 30 kva kiloskar, anabond, water saperator genr set 30 kva kiloskar, benjo washers17x19 genr set 30 kva kiloskar, avr genr set 30 kvakiloskar, oil filter genr set 40 kva harrison, fuel filter genrset 40 kva harrison, air filter genr set 40 kva harrison, fan belt genr set 40 kva harrison, fuel pipe line filter topump genr set 40 kva harrison, fuel feed pump genr set40 kva harrison, oil filter genr set 58.5 kva harrison, fuelfilter genr set 58.5 kva harrison, air filter genr set 58.5kva harrison, fan belt genr set 58.5 kva harrison, fuelpipe line filter to pump genr set 58.5 kva harrison, corksheet size 1m x 1m genr set 58.5 kva harrison, fuel feedpump genr set 58.5 kva harrison

Central Government/Public Sector

TRN :35789768 | 17 Nov, 2025

Tender Value : 0

Bokaro - Jharkhand

Tender for gem bids for surgical, disposable syringe 5 ml needle size 24 g, disposablesyringe 5 ml needle size 22 g, disposable syringe withneedle 2 ml, dispo syringe with needle, syringeinsulin, mersilk no 3 dash 0 with cutting, surgicalbandage, adhesive plaster 2.5 cm, adhesive plaster7.5 cm, ryles tube size 8 fg, ryles tube size 10 fg, ryles tube size 12 fg, ryles tube size 14 fg, rylestube size 16 fg, plain catheter size fr 16, plaincatheter size fr 18, i.v set with regulator, intra cathvasofix g20, intra cath vasofix g22, intra cath vasofixg24, plain catgut 1dash0, mersilk 3 dash 0, mersilk 2 dash0, silk reel 6 reel x 25 mtr r 822, silk reel 6 reel x 25 mtrr 825, disposable needle g26 1by2 inch, disposable spinalneedle 25g, foleys ballon catheter 2way size 18 fr, foleys ballon catheter 2way size 16 fr, foleysballon catheter 2way size 14 fr, foleys balloncatheter 2way size 12 fr, absorbant cotton wool, gauge than 90cm x 15mtr, plaster of paris 10 cm x 2.7mtrs, plaster of paris 15 cm x 2.7 mtrs, urobag, surg sprit400 ml /bid number: gem/2025/b/6846891* /dated: 01-11-2025 & & / bid document1 / 42

State Government

TRN :35771498 | 17 Nov, 2025

Tender Value : 1.07 Lacs

Charkhi Dadri - Haryana

Tender for repair of damaged lining and head cross regulator at rd 63175 of badhwana disty

State Government

TRN :35776081 | 07 Nov, 2025

Tender Value : 2.83 Lacs

Suryapet - Telangana

Tender for repairs to damaged crs masonry wing wall on the right side of the cross regulator located at km 19.830 on mukthyala branch canal at huzurnagar village and mandal

State Government

TRN :35763340 | 10 Nov, 2025

Tender Value : 17.65 Lacs

Dausa - Rajasthan

Tender for major repair work under state budget head at govt. sss bilona kalan -demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster (ceiling): 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand) internal plaster : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :12mm thick. plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. panting on doors & windows :- painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of 240/415 v ac mcb with positive isolation of breaking capacity not less than 10 ka (b/ c tripping characteristic as per type of load and site requirement) 4kv impulse withstand voltage, as per pwd specification for electrical works with isi marked is 8828(1996) / conforming to iec 60898-1 2002, iec 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per iec, minimum phase termination capacity of 35sq.mm. , conductorline load reversibility, label holding facility , ip 20 contact protection and fitted with existing distribution board/sheets, min. operation 20,000 upto 32 a rating and 10,000 upto 63 a, 5000 for 80 a rating including making connections, testing etc. as required. . oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .6a to 32a rating. 50 a to 63a rating providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed un-arrmoured aluminium cable confirming to is:1554 p-i / is :7098 p - i of 1.1 kv with h4- grade electrolytic aluminium conductor confirming to is 8130 of purity >99.6 %, inner / outer sheath confirming to is:5831 in existing rcc / hume / stoneware / pvc pipe/ open duct/cable trench / cable tray (with cable tie) including testing etc. as required of following size. oem must have it's own in house nabl accrediated laboratory for testing procedure as per is:10810. for additional technical parameters of product / work refer annexure 'a' attached with this bsr 6.0 sq. mm 4 core providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating p & f isi marked (is:3854) 6 amp. flush type non modular switch with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material including cutting hole in tile and making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of of 3/5 pin 6 amp. flush type non modular socket made out from industrial grade polycarbonate or fire resistant abs material, brass terminal with porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .

State Government

TRN :35765746 | 10 Nov, 2025

Tender Value : 4.90 Lacs

Jaipur - Rajasthan

Tender for demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). supply & stacking good soil of earth at site complete including loading unloading & transportation etc.good soil of earth filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :columns, pillars, posts and struts etc. centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.m20 grade nominal mix / design mix roviding m-25 grade concrete by using cement as per codal provision instead of m-20 grade design mix. providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating

Central Government/Public Sector

TRN :35770160 | 12 Nov, 2025

Tender Value : 0

Imphal - Manipur

Tender for gem bids for led bulb 18w 220-240 volt led bulb 9w 220-240 volt ceiling fan 1200mm sweep with electronic regulatorconforming to is switch socket combination 6 amp 240vwith gang box isi marked switch socket combination 15amp 240v with gang box isi marked pedestal fan 400mmsweep wall mounted fan 300mm sweep conforming to is socket 3 oblique 6 pin 5 obliqu 15 amp 240v isi marked exhaust fan 300mm sweep conforming to is mcbdistribution box 8 way conforming to is 13032 mcb 20amp sp 240 volts angle holder bakelite isi marked concertina coil 1050mm dia hdpe sand bags of size14inch x 36inch weight not less than 60 gms led securitylifgt fitting 20 watts security light fittings for 65w led plywood commercial bwr grade isi marked of size 8ft x 4ftx 12mm thick bib cock fancy type 15mm long nozzle cpbrass mirror for gents of size 30inchx 15inch x5mm thick pvc connection pipe 15mm dia 450mm long with both sidenut and washer jet spray teflon tape 3 oblique 8 inchwide 10 mtr roll gun metal gate valve 25mm m painingbrush 100mm standard quality cp towel rail 600mm long20mm dia with bracket bricks sub class b old size bestlocally available minimum compressive strength 75 kgoblique sqcm water absorption not more than 20percentage app water proofing membrane 3 mm thick 1mwide 10 m long long angle iron picket of size 18 mtrlength of size 2inch x2inch laip pendent holder bakelite isimarked led batten surface 4ft long 18w output 1600lumen per watt with suitable powder coated frame endcape and connector swtich piano 6 amp 240v isi marked cp cast copper alloy bib cock long body 15mm bore cpshower rose 75mm dia with swivel arm 15mm bore squareoblique round shape mcb 10 amp sp with enclosure boxmild steel mcb 32 sp 240 volts mcb 40 amp sp 240 bid number gem2025b6848455 dated 01-11-2025 bid document1 63 0 0 volts, , mcb 63 dp 240 volts, , bulk head fitting in deepdrawn anodized aluminum body, epoxy powder coated andhead resistant prismatic glass cover with specially., waterdespencer 20 ltr make voltas, vitreous china pedestalpattern water closet european type ewc inclk pvc seat andcover, nylon rope 32mm, vitreous china wash hand basinof size 550mm x 400mm, pvc insulated sheathedunarmored cable 6sqmm twin core aluminum conductor isimarked with working voltage upto 1100 volt roll of 90 mtrs, flexible cable twin twisted roll of 90 mtr 23 oblique 0.0040, conforming to is, pvc sheathed unarmored strandedcopper conductor cable of size 1sqmm conforming to isimarked 90m roll, tripple layer hdpe water storage tankcylindrical vertical with closed top 1000ltrs capacityconforming to is specification, tripple layer hdpe waterstorage tank cylindrical vertical with closed top 500ltrscapacity conforming to is specification, 1 hp motor, nonskid ceramic colored tiles of size 600mm x 600mm x 9 to10mm thick, sheated unarmored stranded copperconductor cable of size 1.5sqmm conforming to isiconductor cable to size 1.5sqmm conforming to isi marked90m roll, flood light 200 watt, ppgi profiled sheet of size10ft x 3.5ft, 0.50mm thick, mild steel corrugatedgalvanized cgi sheet 8ft x 3ft, .63mm thick isi marked, ordinary portland cement 43 grade in hdpe bags of 50 kgseach, confirming to is 269-1976, m seal 100gm, pvcsheathed unarmoured stranded copper conductor cable ofsize 2.5sqmm conforming to isi marked 90m roll, pvcsheathed unarmoured stranded copper conductor cable ofsize 4sqmm conforming to isi marked 90m roll, thinner forpaint, tarpentin oil, paining brush 75mm standard quality, painting brush 50mm standard quality, coarse sanddimapur sand conforming to is 383 to1978., coarseaggregate crushed stone 20mm graded conforming to is383 to1979, plywood commercial bwr grade isi marked ofsize 8ft 4ft x 19mm thich, cp cast copper alloy stoop cock15 mm bore, mild steel hard drawn wire mesh 50 x 50mmpitch 3mm dia of wire, weight not less that 2.20 kg per, white cement, tirpolean plastic 30 x 30, tirpolean plastic24x18, pvc swr pipe 75m dia 3m long with socket end isimarked, pvc swr pipe 110m dia 3m long with socket endisi marked, pvc l bow 4 inch, pvc t 4 inch, pvc socket 4inch, pvc l bow 3 inch, pvc t 3 inch, pcv socket 3 inch, pixel bulk head fitting in deep drawn anodized minimumbody, epoxy powder coated and heat resistant prismaticglass cover with specially, change over switch 63 amp fourpole, change over switch 100 amp four pole, 25 ltr waterstrong geyser plastic body with all accessories forinstallation, pvc insulated sheathed unarmoured cable10sqmm twin core aluminium conductor isi marked withworking voltage upto 1100 volt roll of 90 mtr, insulationtape 3 oblique 8 inch wide 9 mtr roll, mild steel wire nailssorted size, gi binding wire 3mm dia, curtain rod mscp20mm dia 12ft long, bracket for curtain rod aluminiumpowder coated curtain rod in white colour 20 oblique 25mmdia, synthetic enamel paint high gloss superiour qualityblack colour, synthetic enamel paint high gloss superiourquality red colour, synthetic enamel paint high glosssuperiour quality yellow colour, synthetic enamel painthigh gloss superiour quality og colour, synthetic enamelpaint high gloss superiour quality white colour, plywoodcommercial bwr grade isi marked of size 6ft x 3ft x 12mmthick, cp cast copper alloy pillar cock 15mm, batten holderbakelite, vitreous china urinal pot bowl type including //bid details2 / 63 spreader, solvent cement for pvc pipe, distemper paintemulsion oblique acrylic distemper, pvc flexible ribbed pipe20mm dia

Related Searched Keywords : da regulator

List of da-regulator Tenders

Tender for repairs and replacement of damaged shuttering arrangement for cross regulator km 15 466 of right main canal near syamalapuram village of l n peta mandal

Tender for repair of damaged lining and head cross regulator at rd 63175 of badhwana disty

Tender for repairs to damaged crs masonry wing wall on the right side of the cross regulator located at km 19.830 on mukthyala branch canal at huzurnagar village and mandal

Get da regulator Tender Alert...

Related Searched Keywords : da regulator

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us