Filters

List of cover-all-suit Tenders

List of latest cover-all-suit Tenders in Indian Tenders. Click on any cover-all-suit Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for cover-all-suit Tenders.

All-Tenders (11)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :35032598 | 12 Aug, 2025

Tender Value : 0

Imphal - Manipur

Tender for gem bids for plywood commercial bwr grade isi marked of size 6 ft x 3 ftx 12mm thick gi binding wire 12mm dia hdpe tarpaulin30 ft x 30 ft hdpe tarpaulin 18 ft x 24 ft pvc swr pipe110mm dia 3m long with socket end isi marked pvc swrtee 110 mm bore isi marked pvc swr bend with accessdoor 110 mm bore isi marked pvc swr socket 110mm diaisi marked vitreous china urinal pot bowl type includingspreader cp waste coupling and pvc waste pipe switchsocket combination 15 amp 240v with gang box isi marked hdpe sand bags of size 14 inch x 36 inch weight not lessthan 60 gms ordinary portland cement 43 grade in hdpebags of 50kg each confirming to is 269-1976 coarse sanddimapur sand conforming to is 383 -1978 switch socketcombination 6 amp 240v with gang box isi marked bedswitch 5 amp isi marked tripple layer hdpe water storagetank cylindrical vertical with closed top 500ltrs capacityconforming to is specification led bulb 18w 220-240 volt led batten surface 4 long 18w output 1600 lumens perwatt with suitable powder coated frame end caps andconnector pvc sheathed unarmoured stranded copperconductor cable of size 25sqmm conforming to isi marked90m roll insulation tape 3 y 8 inch wide 9 mtr roll flexiblecable twin twisted roll of 90 mtr 23 y 00040 conforming tois pvc casing capping 32mm conforming to is fanregulator electronic dimmer type conforming to is pvcsquare box 4 inch x 4 inch for ceiling rose isi marked vitreous china water closet orissa pattern with integratedfoot rests and p trap ceiling fan 1200mm sweep withelectronic regulator conforming to is mild steel corrugatedgalvanised cgi sheet 10 ft x 3 ft 063 mm thick isi marked mild steel corrugated galvanised cgi sheet 8 ft x 3 ft 063mm thick isi marked mild steel wire nails assorted size socket 3 y 5 pin 5 amp 240v isi marked socket 3 y 6 pin 5 bid number gem2025b6528531 dated 02-08-2025 bid document1 66 0 0 y 15 amp 240v isi marked, switch piano 5 amp 240v isimarked, glazed ceramic coloured tiles of size 300mm x300mm x 7-8mm thick, vitreous china pedestal patternwater closet european type ewc including pvc seat andcover, white cement, welding rod pkt of 100 electrodes, fuel filter 15 kva genr set kirlosker, oil filter 15 kva genrset kirlosker, air filter assembly 15 kva genr set kirlosker, fuel pipe 15 kva genr set kirlosker, oil pipe 15 kva genrset kirlosker, avr 15 kva genr set kirlosker, door lockkey 15 kva genr set kirlosker, door glass for 15 kva genrset kirlosker, fuel filter 5 kva genr set kirlosker, oil filter5 kva genr set kirlosker, air filter assembly 5 kva genrset kirlosker, fuel pipe 5 kva genr set kirlosker, oil pipe 5kva genr set kirlosker, avr 5 kva genr set kirlosker, pedestal fan 400mm sweep, tripple layer hdpe waterstorage tank cylindrical vertical with closed top 1000ltrscapacity conforming to is specification, pvc sheathedunarmoured stranded copper conductor cable of size1.5sqmm conforming to isi marked 90m roll, plywoodcommercial 18 y 19mm bwr 8 ft x 4 ft, hdpe jar 20 ltr, app water proofing membrane 3 mm thick 1m wide 10 mlong, pvc insulated sheathed unarmoured cable 10sqmmtwin core aluminium conductor isi marked with workingvoltage upto 1100 volt roll of 90 mtrs, battery terminal, mcb 63 amp dp 240 volts, starting and stoper relay, mcb3 phase 63 amp 20 kva genr, self starter for genr set, ledbulb 9w, 220-240 volt, synthetic enamel paint high glosssuperiour quality og colour, synthetic enamel paint highgloss superiour quality red oxide paint, synthetic enamelpaint high gloss superiour quality black colour, syntheticenamel paint high gloss superiour quality white colour, synthetic enamel paint high gloss superiour quality redcolour, painting brush 75mm standard quality, switchpiano 15 amp 240v isi marked, ceiling rose surfacebakelite 65 x 50mm 2 to 3 terminals, plywood commercialbwr grade isi marked of size 8 ft x 4 ft x12mm thick, acrylic sheet 3mm thick for window panes 8 ft x 4 ft, cpstop cock 15mm bore, cp cast copper alloy pillar cock15mm bore, m seal 100 gm, wall mounted fan 300mmsweep conforming to is, exhaust fan 300mm sweepconforming to is, mcb 10 amp sp with enclosure box mildsteel, synthetic enamel paint high gloss superiour qualitygreen colour, painting brush 100mm standard quality, pvcsolid panel plain colour door and frame made of 5mm thickpreformed pvc panel reinforced with mild steel square tubeincluding aluminium mongery size 3 ft x 6 ft, hand drillmachine, vitreous china wash hand basin of size 550mm x400mm, mcb 20 amp sp 240 volts, bib cock fancy type 15mm long nozzle cp brass, pvc flexible pipe 25mm dia, hand grinder machine, standard wooden ballies 3m longdia not less than 100mm on either end, pixel bulk headfitting in deep drawn anodized aluminium body epoxypowder coated and heat resistant prismatic glass cover withspecially designed gasket with led lamp 1 x 5 watt, tullupump 0.5 hp, mcb 32 amp dp 240 volts, mild steel doorwire mesh weight not less than 2.20 kg per sqm, mild steelcorrugated galvanised cgi sheet 6 ft x 3 ft 0.63 mm thickisi marked, batten holder bakelite angle type isi marked, synthetic enamel paint high gloss superiour quality whitecolour, synthetic enamel paint high gloss superiour qualityblack colour, synthetic enamel paint high gloss superiourquality greencolour, bricks sub class b old size best locallyavailable minimum compressive strength 75 kg sqcm waterabsorption not more than 20 percentage, pendent holder //bid details2 / 66 bakelite isi marked, mild steel corrugated galvanised cgisheet 12 ft x 3 ft 0.63 mm thick isi marked, pvc flushingcistern of 10ltr capacity with flushing pipe and fittingscomplete, cp shower rose 75 mm dia with swivel arm15mm bore square round shape, pvc swr tee 75 mmbore isi marked, pvc swr bend 75mm bore isi marked, pvc swr pipe 75mm dia 3m long with socket end isimarked

Central Government/Public Sector

TRN :35032741 | 12 Aug, 2025

Tender Value : 0

Imphal - Manipur

Tender for gem bids for led bulb 18w 220-240 volt led batten surface 4 long 18woutput 1600 lumens per watt with suitable powder coatedframe end caps and connector pendent holder bakelite isimarked ceiling fan 1200mm sweep with electronicregulator conforming to is switch socket combination 6amp 240v with gang box isi marked modular socket outletmulti purpose 5 pin 6 amps 240 volt isi marked modularswitch piano flush type 6 amps 240 volts single pole oneway isi marked wall mounted fan 300mm sweepconforming to is pvc insulated sheathed unarmouredcable 16sqmm 4 core aluminium conductor isi marked withworking voltage upto 1100 volt roll of 90 mtrs modularsocket outlet multi purpose 2 in 1 6 pin 16 6 amps 240 voltisi marked switch socket combination 15 amp 240v withgang box isi marked pedestal fan 400mm sweep roomheater switch piano 6 amp 240v isi marked exhaust fan300mm sweep conforming to is cp cast copper alloy bibcock long body 15mm bore mcb distribution box 8 wayconforming to is 13032 cp shower rose 75 mm dia withswivel arm 15mm bore square round shape mcb 10 ampsp with enclosure box mild steel mcb 20 amp sp 240 volts mcb 40 amp sp 240 volts mcb 63 amp sp 240 volts mcb 32 amp dp 240 volts mcb 63 amp dp 240 volts pixel bulk head fitting in deep drawn anodized aluminiumbody epoxy powder coated and heat resistant prismaticglass cover with specially designed gasket with led lamp 1x 5 watt change over switch 100 amp four pole changeover switch 63 amp four pole angle holder bakelite isimarked 25 ltr watre storage geyser plastic body with allacessoreis for instalation water despencer 20 ltr vitreous china pedestal pattern water closet european typeewc including pvc seat and cover concertina coil1050mm dia nylon rope 24mm vitreous china wash hand bid number gem2025b6528627 dated 02-08-2025 bid document1 103 0 0 basin of size 550mm x 400mm, pvc insulated sheathedunarmoured cable 6sqmm twin core aluminium conductorisi marked with working voltage upto 1100 volt roll of 90mtrs, pvc insulated sheathed unarmoured cable 10sqmmtwin core aluminium conductor isi marked with workingvoltage upto 1100 volt roll of 90 mtrs, flexible cable twintwisted roll of 90 mtr 23 y 0.0040 conforming to is, pvcsheathed unarmoured stranded copper conductor cable ofsize 1sqmm conforming to isi marked 90m roll, pvcsheathed unarmoured stranded copper conductor cable ofsize 2.5sqmm conforming to isi marked 90m roll, insulationtape 3 y 8 inch wide 9 mtr roll, hdpe sand bags of size 14inch x 36 inch weight not less than 60 gms., coarse sanddimapur sand, coarse aggregate crushed stone 20mmgraded, mild steel wire nails assorted size, gi binding wire3mm dia, pvc sheathed unarmoured stranded copperconductor cable of size 1.5sqmm conforming to isi marked90m roll, four layer hdpe water storage tank cylindricalvertical with closed top 1000ltrs capacity conforming to isspecification, four layer hdpe water storage tankcylindrical vertical with closed top 500ltrs capacityconforming to is specification, 0.5 hp motor, ldp sheet, bed switch 5 amp isi marked, mild steel cp curtain rod20mm dia, mild steel cp bracket for curtain rod 20mm dia, led security lifgt fitting 20 watts, security light fitting for65 watt led, 1 hp motor, flood light 200 watt, mild steelcorrugated galvanised cgi sheet 10 ft x 3 ft 0.63 mm thickisi marked, mild steel corrugated galvanised cgi sheet 8 ftx 3 ft 0.63 mm thick isi marked, mild steel corrugatedgalvanised cgi sheet 6 ft x 3 ft 0.63 mm thick isi marked, m seal 100 gm, synthetic enamel paint high glosssuperiour quality black colour, synthetic enamel paint highgloss superiour quality red colour, synthetic enamel painthigh gloss superiour quality yellow colour, syntheticenamel paint high gloss superiour quality og colour, synthetic enamel paint high gloss superiour quality whitecolour, synthetic enamel paint high gloss superiour qualitygreen colour, synthetic enamel paint high gloss superiourquality mehroon colour, thinner for paint, tarpentine oil, painting brush 75mm standard quality, plywoodcommercial bwr grade isi marked of size 6 ft x3 ft x 12mmthick, plywood commercial bwr grade isi marked of size 8ft x 4 ft x 12mm thick, hdpe tarpaulin 30 ft x 30 ft, hdpetarpaulin 18 ft x 24 ft, cp angle stop cock 15mm bore, bibcock fancy type 15 mm long nozzle cp brass, cp stop cock15mm bore, mirror for gents of size 30 inch x 15 inch x5mm thick, cp cast copper alloy pillar cock 15mm bore, pvc connection pipe 15mm dia 450mm long with both sidenut and washer, batten holder bakelite angle type isimarked, vitreous china urinal pot bowl type includingspreader cp waste coupling and pvc waste pipe, jet spray, teflon tape 3 y 8 inch wide 10 mtr roll, solvent cement forpvc pipe, gun metal gate valve 25mm m, distemper paintemulsion acrylic distemper, wire mess for window, ordinary portland cement 43 grade in hdpe bags of 50kgeach, confirming to is 269-1976, white cement, pvcflexible water pipe 25mm dia, towel rail 600mm, coirmattress of size 1.83m x 0.9m x 75mm thick comprising of50mm thick high density coir with hessian border pastedwith 25mm thick high density foam pasting to be done, glazed ceramic coloured tiles of size 300mm x 300mm x 7-8mm thick, non skid ceramic coloured tiles of size 600mmx 600mm x 9-10mm thick, ppgi profiled sheet of size 10 ftx 3.5 ft 0.63mm thick, paint roller standard quality 8 inch, //bid details2 / 103 cp cast copper alloy hot and cold mixture 15mm bore, fanregulator electronic dimmer type conforming to is, pvcwaste pipe, exhaust fan 450mm sweep matelic bodyconforming to is, pvc swr pipe 110m dia 3m long withsocket end isi marked, pvc swr socket 110mm dia isimarked, pvc swr bend 110mm bore isi marked, fuelfilter bosch f002h20308 genr set 15 kva, lub oil filter 15kva 04.270.01.0.00 genr set 15 kva, v belt aux 10x1500la, air filter genr set 15 kva, fuel pipe line 19x19 1.5 mtr, fuel pipe line 19x19 1 mtr, fuel pipe line 19x19 0.5 mtr, rotating rectifier assy diode tp25 genr set 15 kva, avr 3phase genr set 15 kva, set on indicator bulb green, loadon indicator bulb red, fuel filter assy genr set 30 kva, fuel filter genr set 30 kva, oil filter genr set 30 kva, aircleaner filter genr set 30 kva, v belt avx 10x 10x1265 la, bty 12v 100 ah, canopy lamp 12v dc, fuel filter genrset 58.5 kva model harison, oil filter genr set 58.5 kvamodel harison, air filter genr set 58.5 kva model harison, fuel filter genr set 15 kva, oil filter genr set 15 kva, doide 20 amp, fuel injector assy genr set 10 kva, fuelflexible pipe genr set 10 kva, fuel high pressure pipe genrset 10 kva, piston head sim copper genr set 10 kva, banjo bolt no 19, banjo washer copper no 19, diode 30amp, over flow pipe genr set 10 kva, oil filter genr set10 kva, fuel filter genr set 10 kva, dg on lamp, load onlamp, piston ring set genr set 10 kva, tappet covergasket genr set 10 kva, tappet cover nut, bty terminalwith lead plus minus, voltmeter genr set 10 kva, air filtergenr set 30 kva, fip in line assy three cyl genr set 30 kva, fuel flexible pipe genr set 15 kva, fuel filter genr set 40kva, oil filter genr set 40 kva, relay genr set 40 kva, diode 40 amp, fuel high pressure pipe, fuel filter assy withhand primer, self starter assy genr set 40 kva, alternatorassy 12v genr set 40 kva, fuel feed pump genr set 15kva, fuel high pressure pipe genr set 15 kva, fuel filtermicro genr set 15 kva, fan belt, alternator 12v dc 35amp genr set 15 kva, self starter assy 12v genr set 15kva, bty lead connecting cable 4 feet, fuel pipe assy tankto pump, fuel filter over flow, coupling 19 bhp pumpingset, fuel filter 19 bhp pumping set, oil filter 19 bhppumping set, alternator charging 12v genr set 10 kva, fuel single element pump genr set 10 kva, feed pumpgenr set 10 kva, turbo charge assy genr set 40 kva, charging altenator assy genr set 40 kva, head gasket simtype copper genr set 40 kva, relay 63 amp genr set 40kva

Central Government/Public Sector

TRN :35014797 | 16 Aug, 2025

Tender Value : 13.00 Lacs

Tawang - Arunachal Pradesh

Tender for gem bids for nageswar, bid number gem2025b6517333 dated 01-08-2025 bid document1 101 1 1 copper alloy taps/stop valves v2 conforming to is 8931q3, flushing cistern q3, sinks q3, stainless steelshelf rack q3, bathroom or toilet mirror v2 q4, plastics bib taps pillar taps angle valves and stop valves asper is 9763:2000 latest q3, connection pipe with nutsv2 q3, towel rail / ring for bathroom q3, waste pipeq3, soap dish - case q4, rotational mouldedpolyethylene water storage tanks v2 conforming to is12701 q3, toilet seat covers v2 q4, bathroom watershower v2 q3, waste fittings for washbasin and sinksas per is 2963 q3, pvc three layer water storage tank1000 ltrs with cover, health faucet cp with tube 1 pt 5 mtrlong, pvc pipe 110 mm bore, western toilet europeanpattern p trap or s trap, 15mm brass fancy tap cp bib tap, bib cock brass 15 mm, powder coating bib tap, bib cockcp brass 15 mm, hand wash basin viterous china glazed, ppr pipe 25 mm outer diameter, glass shelf 6 mm thickwith cp railing of size 450 by 200 mm, ppr pipe 20 mmouter diameter, ppr gate valve 20 mm, wc orissapattern viterous china 450 by 350 mm, hydraulic doorcloser, ppr gate valve 25 mm, bib cock 15 mm cp longbody, pvc health faucet with tube 1 pt 5 mtr long, pprunion 15mm, toilet paper holder cp, ppr gate valve15mm, ppr union 20 mm, plywood bwr 8 ft by 4 ft by 8mm, 15mm brass fancy tap angle valve, urinal potviterous flat back, door stopper aluminium, cp wastecoupling 32 mm, nipple gi 15 by 100 mm, 2 way bib cockcp, 2 way angle cock cp, plywood bwr 8 ft by 4 ft by 4mm, elbow gi 15 mm, stainless steel curtain rails 4mtreach, pvc bend 110 mm bore, door or wall hook rail setpeg set 3 pin, ppr 25mm tank socket, pvc three layerwater storage tank 300 ltrs with cover, ppr elbow 20 mm, tee equal gi 15 mm, helical door spring, pvc shelf 450by 200 mm, socket gi 15 mm, aluminium sliding bolt 250mm long, gi bend 15 mm, ppr tank socket 20 mm, union gi 20 mm, ppr socket 25 mm, ppr socket 15mm, ppr elbow 15 mm, ms butt hinges 100 mm, door or wallhook rail set peg set 6 pin, plywood bwr 8 ft by 4 ft by 6mm, ppr tank socket 15mm, pvc connector 110 mm bore, flushing handle suitable for 10 ltrs cistern, pvc o hshower with arm, ppr union socket 50 mm, tee gi 15mm, jet spray cp 15 mm, aluminium anodised handle 100 mm, pvc bend for cistern, excel acrylic emulsion terracoda, synthetic enamel paint white colour, ppr socket 20 mm, tee gi red 20 by 20 by 15mm, m seal 100 gms, union gi15 mm, connection pipe wired 600mm, socket gi reducer15 by 20 mm, tee gi 20 mm, white cement, teflon tape19mm 10mtr, elbow gi 20 mm, syphon kit for flushingcistern, nails 3 inch 75mm long, ppr pipe clamp 20 mmdia, gi union socket 25mm, pvc tee 110 mm, u clamp20mm dia, tank socket gi 15 mm, aluminium barreltower bolt 75 mm, ppr elbow 90 degree 50mm, glazingputty oil glazed, gi socket 50mm, ppr reducing tee 40 by25mm, aluminium barrel tower bolt 100 mm, tank socketgi 20 mm, pvc grating round type 140 mm, pvc bend 75mm, ppr elbow 90 degree 32mm, ppr brass l 20mm, pprbrass t 20mm, sink mixture cp, ppr t 20mm, ppr union25 mm, ppr u clamp 20 mm dia

Central Government/Public Sector

TRN :35019868 | 18 Aug, 2025

Tender Value : 0

Ajmer - Rajasthan

Tender for supply of driver seat complete assembly to drg. no. 726-6-1-001 alt. n, col.-1 item no. 16 for train-18 spare to be used in 3 phase locomotives. note : 1 all the crew friendly features of train-18 driver seat like head rest, arm support, front and back seat movement, reclining back support, vertical height adjustment, leatherette seat cover with comfortable cushion to be identical to train-18 driver seat of make : f.i.s.a. srl italy, 2 suitable structural modification as necessitated by 3 phase loco cab base to windshield viewing height to be done by firm only without any additional cost. 3 firm should have supplied train-18 driver seat for train 18 or as train-18 spare for 3 phase loco past performance. make : f.i.s.a srl italy or vijayjyot or volvo or medha servo drives or similar..

Central Government/Public Sector

TRN :34975604 | 19 Aug, 2025

Tender Value : 1.18 Crore

Cachar - Assam

Tender for gem bids for provision, supply of 2 mega pixel network dome camera with poweradaptor, supply of 2 mega pixel network indoor ir ptzcamera, supply of 2 mega pixel network outdoor ir ptzcamera, providing camera recording licenses for existingvideo management software, supply of 8tb hard driver, supply of spf plus sr optic 10gbe 850nm module forexisting storage, supply of om4 lc or lc fiber cable, supply of workstation, supply of 55 inch display unit, supply of layer-2 24 ports poe plus managed switch, supply of 1g single mode sfp transceiver module, supplyof 12 core single mode armoured optical fiber cable, supply of 12 port loaded optical fiber liu, supply of opticalfiber patch cord, supply of cat6 4 pair unshielded twistedpair cable, supply of cat6 4 pair shielded twisted paircable, supply of cat6 24 port u or utp patch panel, supplyof cat6 u or utp patch cord, supply of rj 45 connector, supply of 6u wall mount network rack, supply of 3 core2.5mm copper electrical cable, supply of electrical boxwith 25 amp mcb 15 or 16 amp socket at rack end, supplyof 5 or 6 amp shuttered switch socket combined with coverplate and back box, supply of 4 way waterproof electricalcable junction box with terminal block, supply of 25mm msconduit with all fixing accessories, supply of 25mm pvcpipe with all fixing accessories for indoor, supply of 25mmpvc flexible pipe for indoor, supply of 32mm pvc pipe withall fixing accessories for indoor, supply of 32mm pvcflexible pipe for indoor, supply of 25 or 32mm pvcreinforceable flexible pipe, laying of 25mm pvc pipe forindoor with all fixing accessories, laying of 25mm pvcflexible pipe for indoor, laying of 32mm pvc pipe with allfixing accessories for indoor, laying of 32mm pvc flexiblepipe for indoor, laying of 25 or 32mm pvc reinforceableflexible pipe, laying or fixing of ms conduit including fixing /bid number: gem/2025/b/6504064* /dated: 28-07-2025 & & / bid document1 / 37 & & /item categoryof suitable saddle or screws etc, laying of optical fibrecable end to end ferruling labeling and termination throughhdpe or ms conduit or gi conduit or pvc pipe, laying ofcat6 u or utp end to end ferruling labeling and terminationthrough pvc pipe, laying of cat6 stp end to end ferrulinglabeling and termination through hdpe or ms conduit or giconduit or pvc pipe complete as required, laying ofelectrical cable end to end ferruling labeling andtermination through hdpe or ms conduit or gi conduit orpvc pipe complete as required, mounting, fixing, labelingand dressing of 6u wall mount rack complete as required, mounting, fixing and labeling of all types of camerascomplete as required, installation splicing of all ofc corerack to server rack, labelling, testing and commissioningof 12 or 24 port liu with all its accessories complete asrequired, installation of 5 or 6 amp shuttered switch socketcombined with cover plate and back box complete asrequired, installation of electrical box with 25 amp mcb 15or 16 amp socket at rack end complete as required, installation, testing and commissioning of hdd storagecomplete as required, mounting, fixing, installation, testing, labeling and commissioning on the network rackside of u or utp 24 port patch panel complete as required, mounting, fixing, installation and configuration of all typesof switches complete as required, installation andconfiguration of workstation complete as required, mounting, fixing, installation and configuration of all typesof display unit complete as required, configuration ofcameras recording licenses for existing video managementsoftware primary and redundary server complete asrequired, relocation of existing cameras with accessoriescomplete as required, testing, commissioning, certification, providing 3 sets of completion diagram and documentationof entire project complete as required

Central Government/Public Sector

TRN :34958759 | 16 Aug, 2025

Tender Value : 3.49 Lacs

Shimla - Himachal Pradesh

Tender for gem bids for procurement, bid number gem2025b6497156 dated 26-07-2025 bid document1 51 1 1 all pin esteem paper pin stainless steellength of pin xdiameter 26mm x point 71mm, ball pen elasto grip point 5mm tip blue colour, binder clips medium size pack of 12 pcsblack 25mmx19mm, calculator normal, scientificcalculator, carbon paper a3 blue, carbon paper a4 blue100 sheet per packet, cello tape point 5 inch transparent, cello tape 1 inch transparent, cello tape 2 inchtransparent, correction fluid pen 8ml, dak pad fourflapper pvc file rexene thickness 4mm greenred, dakpad four flapper pvc file simple thickness 4mm, dampersponge medium height if moisteners 23 cm, desk diarystand transperent l x w 22 x 20 cm, desktop paper traya4 size set of two height of tray 1218cm, desktop papertray a4 size single height of tray 36cm, diary register 4quire l x w 32 x 21, dispatch register 4 quire l x w 32 x21, drawing pin push pins packet 50 pins per packet plastichead bevelled shape, dust bin for office use capacity 10 lts, duster cloth white 22 x 22, eraser, file cover, file ringbinder a4 size 1mmm thick plastic blue width 250mm, fine tip permanent marker pen blackblue, gem clipushapeclip copper coated mild steel wire 100 clips per packet, glue stick 25 g, gum bottle 300 ml, gum tube 50 ml, highlighter green, highlighter red, highlighter yellow, keyboard cleaning brush bristle length 2 inch, mouse padanti skid rectangle shape thickness 3mm, paper weightglass weight 100gm, papper cutting knife small 80mmlong and 09mm width blade materialcarbon steel, pappercutting knife big 120mm long and 18mm width bladematerialcarbon steel, pen stand mesh type cylindrical 4x4inch black steel, pen stand 4 sockets length 9 inch, pencilhb per pack containing 10 pcs., peon book l x b 16 x 20cm, permanent marker black, photo glossory paper 50paper per packet a4 size 175gsm, photostat paper a3 sizeand 75 gsm 500 sheet per ream, photostat paper a4 sizeand 75 gsm 500 sheet per ream, pilot pen hitechpointpoint 7 mm tip size black, pilot pen hitechpoint point 7 mmtip size blue, pilot pen hitechpoint point 7 mm tip sizegreen, pilot pen hitechpoint point 7 mm tip size red, pincoushion magnetic dia 5cm plasticpvc, pocker pvc, punching machinemedium dp600, punching machinesmalldp280, register 2 quire 146 pages, register 3 quire 194pages, register 4 quire 240 pages, register 6 quire 270pages, ruler scale stainless steel 12 inch, ruler scaleplastic 12 inch, scissor 16cm lenght stainless steel, scissor20cm length stainless steel, self adhesive note set of threecoloure 3x1 size each colour, sharpner, sketch pen seteach contain 12 shades big size, stamp pad material ofpad cotton length of pad 80mm width of pad 50mm, stamppad ink blue colour 30 ml., stapler big hd45 suitable for246 pin, stapler heavy duty 23 24 capacity of staples100staples suitable for pin size 2324 size pin, stapler pin big246 per pack 1000 pins, stapler pin heavy duty 23 24staple per strip 50, stapler pin small no104 per pack 1000pins, staplersmall hd10 suitable for no104 pin size, tapedispenser 1 inch anti skid for office use, transparent filecover with plastic strip a4 size, white board dustermagnetic size 10x2x2 cm, white board marker pen black, white board marker pen blue, white board marker pengreen, white board marker pen red //bid details2 / 51

Central Government/Public Sector

TRN :34930168 | 13 Aug, 2025

Tender Value : 0

Pithoragarah - Uttaranchal

Tender for gem bids for cement in polythene bags 50 kgs each 43 opc , sand coarse , stone aggregate 40 mm graded , crushed stone aggregate 20mm graded , rr stone , hard core of broken stone aggregate of size 45 to 63 mm , tmt bar fe 550 grade 10mm dia and is 1786 to 1985 , non skid ceramic tiles of size 300 x 300 and 8 mm thick , quick setting compound , cement white , main column made by using square hollow steel sections of size 100 x 100 x 4 mm and 3000 mm long , trusses shall be provided using rhs steel section of size 80 mm x 40 mm x 4 mm and 4500 mm long , main purlins shall be made using rectangular hollow steel section of 80 x 40 x 4mm, 3000 mm long , end purlins shall be made using rectangular hollow steel section of 80 x 40 x 4mm and 250 mm long , both side bracings shall be made using rectangular hollow steel section of size 60 x 40 x 3mm and 2940 mm long , gable side bracing shall be made using rectangular hollow steel section of size 60 x 40 x 3mm and 4540 mm long , wall the walls to be made up of puf panels pir panels polyisocyanurate panels , roof 0 point 60 mm thick pre painted galvalume in approved colour sheet fixed with self tapping screws over steel purlins , wind ties of 40 x 5mm ms flat on each side of roof will be provided and shall be secured adequately to purlins with self tapping screws and steel and bitumen washers and bolts , ridge cover 0 point 60 mm thick pre coated corrugated sheet of approved colour matching with the roof sheet of size and design and 3m long , the false ceiling will be made up of 50mm thick continuous line manufactured hybrid core insulated fireproof sandwich ceiling panels in min 1000mm width , pvc door with frame d 915 mm x 2100 mm factory made pvc moulded door shutter 30mm thick , pvc door with frame d1 750 mm x 1800 mm factory made pvc moulded door shutter 30mm thick , ventilators will be 600 x 450 mm with powder coated aluminium frame , sun shade a sun shades 900 x 300 mm for ventilators , sun shade b sun shades 1215 x 550 mm for main doors , self tapping screw 4 inch , self tapping screw 3 inch , rivet full size , nut bolt of size 12mm dia 75mm long with washer , nut bolt of size 12mm dia 125mm long with washer , nut bolt of size 12mm dia 150mm long with washer , 20w led tube light fiting with electronic ballasts and bipin holder and connector and block and etc complete with all accessories , bulk head fitting with 8w short body cfl , modular pvc square box 4 x 4 inch , angle holder , led bulb 15 watt , mcb box 2 way spn , mcb 10 to 32 amp sp , modular switch socket combine 5 oblique 15 amp , star screw full thread 25mm each packet 100 , change over switch 32 amp , tape insulation one and half x 15 mtr with isi mark , wire single core copper conductor 1 point 5 sqmm , elect wire two core copper conductor 6 sqmm , modular switch piano and flush type 5 amp , modular pvc switch board 6x4 inch , ceiling rose , pvc casing and capping of size 25mm , pvc casing and capping of size 25 mm tee , pvc casing and capping of size 25 mm elbow , pvc casing and capping of size 25 mm common for joints , flexible pipe 25mm , lightening conductor made of copper tube 1500mm long x 25mm dia with five copper prongs of length 150mm each fixed to copper ball of dia 50mm and 4mm thick with securing arrangement , solar street light 25w including pole having length 5 mtr long and 75mm dia and complete accessories warranty for street lighting system including battery min 2 years , vitreous china squatting pan iwc orissa pattern and size 680 x 470 mm white with integral foot rests and complete fixing arrangement including vitreous china valveless , vitreous china wash hand basin pedestal type angle back white and flat back and pedestal pype size 580 mm x 450 mm including bracket and pvc connections and waste pipe and 15mm bore cp pillar taps , vitreous china bowl urinal flat back size of 465 mm x 355 mm x265mm white including bracket and waste pipe and urinal spreader with pvc connections and connection pipe , p trap 100mm dia for wc of isi mark , pvc pipe 110 mm dia , pvc y oblique t junction 110mm dia , pvc socket 110 mm dia , pvc swr bend plain 110mm dia , ppr pipe pn 16 oblique sdr 7 point 4 and 3 layer 20mm , ppr pipe pn 16 oblique sdr 7point 4 and 3 layer 32 mm dia , ppr reducer 32 x 20mm outer dia , ppr reducer tee 32 x 20mm outer , ppr union 32mm dia , ppr socket 32mm dia , ppr tee 32mm outer , ppr elbow 32mm isi mark , ppr end cap 32mm dia , ppr socket 20mm dia , ppr elbow 20mm , ppr t 20mm outer dia , pvc floor trap 3 inch dia , pvc pipe 3 inch dia , pvc elbow 75mm dia , pvc t 75mm dia , ppr tank connector inner dia 32mm , ppr gate valve 32mm outer dia , bathroom cabinet ptmt cabinet with looking mirror for toiletry items of size 330mm x 140mm x 530mm with arrangements to fix the same with wall , sealing thread , ppr female threaded elbow inner dia 20mm , ppr female threaded socket dia 20mm , ppr female threaded tee inner dia 20mm , pvc connection pipe 2 feet long with 2 brass nut and bolt , pvc door bend 110mm dia outer dia , pvc tee 110mm dia , m seal , pvc gel 100ml each , taplone tape , ppr wall clamp dia 25mm , ppr wall clamp dia 32mm , cp bib cock 15mm bore long body , cp angle valve chromium plated steel 15 mm bore , cp stop valve chromium plated steel 15 mm bore , cp pillar tap 15 mm bore , ss soap dish holder , cp towel rail 24 mm dia and 600 mm long with fixing fixing arrangement , pre fabricated ms angle 65 x 65 x 5mm with cross bracing between all the four sides of ms angle 40x50x5mm staging for frp tank 500ltr as per tech specs and drg attached , hdpe oblique pvc water tank 500 ltrs and triple layer and including float valve and accessories , cgi sheet 3000 x 900mm x 0 point 60mm of isi mark , gi pipe 2400mm long and 50 mm dia and 1 point 5mm thick , field water heating devices hamam field water heating devices 500 ltrs capacity with five nos of sleeves with 1mm thick ms cover , ppr cutter , welding rod , tile cutter blade , steel cutting wheel blade , safety harness belt of suitable size , magnetic adaptor for self screw fittiing , gum boot 1st quality , hand gloves rubber 1st quality , trawal brick 250mm , shovel hand gs 12 feet 1 point 6 kg with fibre handle , phawarh 915mm with wooden handle , measuring tape 5mtr retractable grade ai 16 , cutter machine with iron cutter blade and wood cutter blade , tile cutter machine , drilling machine portable , drill bits 2mm and 3mm and 5mm and 8mm and 10mm , riveting machine with 100 rivets as per isi specification , spirit level , tube level pipe 4mm of 15mtr length , safety rope 30 mtr long , provision of 01 x plumber to be deployed for 01 month to execute the plumbing wks required in the cement in polythene bags 50 kgs, tmt bar fe 550 grade 10mm dia, non skid ceramic tiles, puf panels

Central Government/Public Sector

TRN :34899511 | 12 Aug, 2025

Tender Value : 39.80 Lacs

West Siang - Arunachal Pradesh

Tender for gem bids for furnishing, vip wooden double bed 2 point 16l x 1 point 87w withmatress godrej almirah double door big size woodenbed side table 3 shelves floor lamp with three shlevesfurniture metal waste bucket small hanger for wall long mirror with frame vip blanket double bed normalblanket double bed bed sheet with pillow cover reynolds door curtain and window curtain for bed room vip photoframe sofa set furniture wooden 5 seater centre tablecoffee table wooden furniture lambs with table smartled tv 53 inch rug carpet 5x3 dining table with fourseater chair wooden vip gas stove 2 burner induction pressure cooker 5 ltr pressure cooker 3 ltr non stick frypen ss cookware set 5 ltr all utensil set kitchen rackstand ss top patila all size 5 to 1 ltr serving bouls andplatters and spoon knife set ss round container all size kitchen clothing tea pot okhli set of dishes plates andbowls and cups set of tableware knives and forks andspoons drinking glasses set of 6 mug and tea cups food storage containers small to large for storing staplesand leftover oven toster grill otg 20 ltr juicer mixer waste bin microwave oven 28l dishwasher shink washing machine full automatic 7 kg 5 point 5 kg fullyautomatic dryer machine automatic heavy iron press withstand cloth dryer stand laundry baskets broom andpan mop stand with bucket duster and pocha cloths toilet bowl cleaner brush and plunger and cleaning supplies garbage bags harpic 1 ltr lizol 1 ltr coine 500 ltr white phynile bucket 20l with mug bathroom towel big hand towel toilet paper with stand bathroom mirror corner stand bathing shop cloth washing dish andpowder hand dryer western toilet seat wash besin towel stand soap stand computer and printer binders lined and blank paper pens and pencil and ruler and bid number gem2025b6363769 dated 22-07-2025 bid document1 105 0 0 eraser and pencil crayons and markers, calculators, voltasdeep frezzer, electric kettle 1 ltr, bukhari, curtain doorsize, solar inverter with battery, solar light 200w, 5 kvagenerator, plastic chairs, plastic table, gyser 10 ltr, exhust fan, curtain rod steel, curtain accessories, carpetroll for floor, foot mat 2x3ft, upvc door 6.5x4 ft, upvcdoor 6 x 3 ft, upvc window with mirror 6x4 ft, upvcwindow with mirror 3x3 ft, upvc door frame, upvcwindow frame, wooden safety 10x1x1, pvc panal forcelling, ordinary rock, filling available excavated earthexcluding rock, supplying and filling in plinth with fine sandunder floors including, supplying chemical emulsion insealed containers including delivery, stone soling underfloors including watering, ns ramming consolidating anddressing complete upto 5 km, providing and laying inposition cement concrete of specified grade excluding thecost of centering and shuttering in footings and bases ofcolumns, all work upto floor plinth level, all work fromplinth level upto floor roof level, centering and shutteringincluding strutting propping, centering and shutteringincluding strutting and propping and removal of form, centering and shuttering including strutting, reinforcementof rcc work including straightening, brick work withcommon burnt, providing half brick masonry with bricks ofclass designation, providing and fixing 1 st quality ceramicglazed wall tiles confirming, providing and laying ceramicglazed floor tiles, providing and laying vitrified floor tiles indifferent sizes, 12 mm thk cement plaster on wall, 15 mmcement plaster on the rough side of single or half brick wallof mix 1 ratio 4, 6 mm thick cement plaster to ceiling, providing and applying white cement based putty of avgthickness, white washing with lime to give an even shadefor new work, finishing walls with water proofing cementpaint of approved brand and maufacture and of requiredshade to give an even shade, applying one coat of cementprimer approved brand, providing wood work in frames offor door and windows, providing and fixing isi marked flushdoor shutters conforming t, providing and fixing aluminiumhandles, providing and fixing aluminum hanging floor doorstopper, providing and fixing aluminium tower bolts, providing and fixing ms grills of required pattern in framesof windows, steel work in built up tubular trusses includingcutting, providing and fixing precoated galvanised ironprofile sheets, providing and fixing precoated galvanisedsteel sheet roofing accessories, providing and fixingprecoated galvanised steel sheet roofing accessories zeropoint 50 mm, providing and fixing thermal insulation ofceiling, weight to be carried by head load from manigongto work site, point wiring in pvc conduit with modular typeswitch, circuit sub main wiring in pvc conduit, 2 x 4 sqmm earth wire for power plug, 2 x 6 sq mm 1 x 6 sq mmearth wire, 2x10 sq mm 1x10sq mm earth wire for commonarea db, 4x10 sq mm 2x10sq mm earth wire for db, 4x16sq mm 2x16sq mm earth wire for db, supplying anddrawing following sizes of frls pvc insulated copperconductor3 x 4 sq mm, supplying and drawing followingsizes of frls pvc insulated copper conductor 3 x 6 sq mm, supplying and drawing co axial tv cable rg, s f pvcconduit, s f modular type switch, s f modular type switchsocket, tv antenna socket outlet, supplying and fixingstepped type electronic fan regulator, supplying and fixingfollowing size modules gi box along with modular base, supplying and fixing following size modules gi box alongwith modular base cover plate for modular switches, //bid details2 / 105 supplying and fixing suitable size gi box with modular plateand cover in front on surface or in reces, supplying andfixing suitable size gi box with modular plate and cover infront on surface or in recess including providing and fixing 6pin 15 by 16 and 5by 6 amps, installation testing andcommissioning of ceiling fan including the down rods ofstandard length, installation of exhaust fan upto 450 mmsweep in the existing opening including making the hole tosuit the size of the above fan making good the damagecoonection testing commissioning etc, extra for fixinglouvers shutters complete with frame for a exhaust, supplying and fixing following way single pole and neutral, supplying and fixing following way prewired tp and n mcbdistribution board, supplying and fixing following wayssurface, providing and fixing following rating, supplyingand fixing 5 amps to 32 amps rating, supplying and fixingfollowing rating and double pole having senstivity crrent upto 300 ma, supplying and fixing 20 amps and 240voltsand spn industrial type socket outlet, providing fixing mpoint v danger notice plate of 200 mm x 150 mm, earthingwith g i earth pipe 4 point 5 mtr long, earthing with g iearth plate 600mm x 600 mm x 6 mm thick includingaccessories, earthing with copper earth plate 600mm x 600mm x 3 mm thick including accessories, providing andfixing 25 mm x 5 mm g i earth strip from earth electrode asrequired, providing and fixing 6 swg dia gi wire on surfaceor in recess for loop earthing as required, supplying thefollowing lighting fixtures including lamps at site rate shallinclude all taxes and duties transportation etc complete, 12inch dia 1 phase exhaust fan 1400 rpm, 2x18 watt cfllight fixture as per wipro cat no wcp 36218 sgw or asequivalent, 48 inch dia 1200 sweep ceiling fan, providingand fixing white vitereous china pedestal type water closeteuropean type w c pan with seat as lid10 litre low levelwhite, providing and fixing wash basin with ci brackets15mm brass pillar taps 32mm cp brass waste of standardpattern, providing and fixing flexible pvc waste pipe forsink or wash basin including pvc waste fittings complete 32mm dia, providing and fixing flexible pvc waste pipe forsink or wash basin including pvc waste fittings complete 40mm dia, providing and fixing 600 x 450 mm bevelled edgemirror of superior glass, providing and fixing viterous chinatoilet paper holder, providing and fixing stainless steel a isi304, providing and fixing chlorinate polyvinyl chloride withclamps at 1 point 00 m, providing and fixing chlorinatepolyvinyl chloride cpvc pipes having thermal stability withclamps at 1 point 50 m, providing and fixing chlorinatepolyvinyl chloride cpvcpipes having thermal stability for hotcold water with clamps at 2 point 00 m, providing andfixing chlorinate polyvinyl chloride cpvc pipes havingthermal stability for hot and cold water supply including allcpvc plain and brass threaded, providing and fixing gunmetal gate valve with ci approved quality, providing andfixing unplasticised pvc connection pipe with brass unions, providing and fixing cp brass bib cock of approved qualityconforming, providing and fixing cp brass long nose bibcock of approved quality conforming to is standards andweighing not less than 810 gms, providing and fixing brassstop cock of approved quality 15mm nominal bore, providing and fixing cp brass shower rose with 15 mm inlet100 mm dia, providing and fixing of cp brass health faucetfor ablution with 1 meter long pvc tube, providing andfixing of 32 mm dia cp brass bottle trap with 190 mm longwall connection pipe in place of pvc waste pipe for wash //bid details3 / 105 basin discharge, providing and fixing of 600 mm long c pbrass towel rail complete with cp brass brackets, providingand fixing of 15 mm dia inlet cp brass adjustable showerwith 190 mm long shower arm complete with flange

Central Government / Public Sector

TRN :34888685 | 18 Aug, 2025

Tender Value : 0

Tirupathi - Andhra Pradesh

Tender for supply of plastic commode seats and covers colour- white of items 2&3 of icf drg. no.icf/dev/sk 6-3-160, alt-s/8, suiting porcelain commode with all connected fittings and hinging devices of material mild steel with nickle chromium plating as per 4.2 b of the specn. is: 2548/96 part - 2. colour -white.

Central Government/Public Sector

TRN :34891878 | 11 Aug, 2025

Tender Value : 0

Visakhapatnam - Andhra Pradesh

Tender for gem bids for entry and mid level desktop computer q2, computermonitor q2 . . % % 4 4 /mse exemption for years ofexperience and turnoverno& % & % . . % % 4 4 /startup exemption for years ofexperience and turnoverno -- 8 8 9 9 : : ; ; / minimum number ofbids required to disable automatic bidextension3 > > ; ;, , @ @ -- / / number of days for which bidwould be auto--extended7 b %b % : : /bid to ra enabledyesb %b % c c /ra quali cation ruleh1-highest priced bid elimination 4 4 /type of bidtwo packet bid4 4 f f /primary product categoryentry and mid level desktop computer g g & i & i /time allowed for technicalclarifications during technical evaluation2 days ; /bid number: gem/2025/b/6459939 /dated: 21-07-2025 & & / bid document1 / 14 q q 8 8 s s q q 4 4 / % % u > u > v v /inspection required byempanelled inspection authority / agenciespre-registered with gemno g g s s /evaluation methoditem wise evaluation/ w & w & /arbitration clauseno /mediation clauseno //bid details /emd detail 8 /requiredno /epbg detail 8 /requiredno /splitting / bid splitting not applied. /mii purchase preference /mii purchase preferenceno /mse purchase preference /mse purchase preferenceyes1. purchase preference will be given to mses having valid udyam registration and whose credentials arevalidated online through udyam registration portal as defined in public procurement policy for micro and smallenterprises mses order, 2012 dated 23.03.2012 issued by ministry of micro, small and medium enterprises andits subsequent orders/notifications issued by concerned ministry. if the bidder wants to avail themselves of thepurchase preference, the bidder must be the manufacturer / oem of the offered product on gem. traders areexcluded from the purview of public procurement policy for micro and small enterprises and hence resellersoffering products manufactured by some other oem are not eligible for any purchase preference. in respect of bidfor services, the bidder must be the service provider of the offered service. relevant documentary evidence inthis regard shall be uploaded along with the bid in respect of the offered product or service and buyer will decideeligibility for purchase preference based on documentary evidence submitted, while evaluating the bid. if l-1 isnot an mse and mse seller s has / have quoted price within l-1+ 15% selected by buyer of margin ofpurchase preference /price band defined in relevant policy, such mse seller shall be given opportunity to matchl-1 price and contract will be awarded for 30% selected by buyer percentage of total quantity. the buyers areadvised to refer the om no. f.1/4/2021-ppd dated 18.05.2023 om no.1 4 2021 ppd dated 18.05.2023 forcompliance of concurrent application of public procurement policy for micro and small enterprises order, 2012and public procurement preference to make in india order, 2017. benefits of mse will be allowed only if seller is2 / 14 validated on-line in gem profile as well as validated and approved by buyer after evaluation of documentssubmitted. 2. estimated bid value indicated above is being declared solely for the purpose of guidance on emd amount andfor determining the eligibility criteria related to turn over, past performance and project / past experience etc.this has no relevance or bearing on the price to be quoted by the bidders and is also not going to have anyimpact on bid participation. also this is not going to be used as a criteria in determining reasonableness ofquoted prices which would be determined by the buyer based on its own assessment of reasonableness andbased on competitive prices received in bid / ra process. 3. reverse auction would be conducted amongst all the technically qualified bidders except the highest quotingbidder. the technically qualified highest quoting bidder will not be allowed to participate in ra. however, h-1will also be allowed to participate in ra in following cases:i. if number of technically qualified bidders are only 2 or 3.ii. if buyer has chosen to split the bid amongst n sellers, and h1 bid is coming within n.iii. in case primary product of only one oem is left in contention for participation in ra on elimination of h-1.iv. if l-1 is non-mse and h-1 is eligible mse and h-1 price is coming within price band of 15% of non-mse l-1v. if l-1 is non-mii and h-1 is eligible mii and h-1 price is coming within price band of 20% of non-mii l-1 g g g g / evaluation method item wise evaluation method contract will be awarded schedulewise and the determination of l1 will be done separately for each schedule.the details of item-consignee combination covered under each schedule are as under: g / evaluation schedules & / / item/category / quantityschedule 1entry and mid level desktop computer8schedule 2computer monitor15entry and mid level desktop computer 8 pieces i i /technical specifications* i / as per gem category speci cation /speci cation i i /specificationname 8 8 g g /bid requirementallowed valuesprocessordescription of storesdesktop computer with table mount monitor systemwith compatible chipset as per processor make withminimum 6 usb portcomputer typemid levelprocessor numberamd ryzen 5 5600g, intel core i5 12400 or highermotherboardexpansion slots pcie x 12 or higherexpansion slots m dot 2 forwifi1 or highergraphicsgraphics typeintegratedoperating systemfactory pre-loadedoperating system bydesktop oemwindow 11 professionalmemory ramram size memorycard/module in gbcapacity to be installed inthe system16, 32 or higher3 / 14 storagetype of storage installedwith the systemnvme-ssd plus hdd@7200 rpmssd - storage capacity ingb500, 512, 1024, 2048 or higherhdd - storage capacity ingb1000, 2000 or highercabinetbays for optical drive1optical drivedvd r/waudio interface typeuniversal 3.5 mm audio jack support for audio-in andaudio out, audio-in, audio-outportsnumber of usb type a portversion 2 point 04 or highernumber of usb type a portversion 3 point 2 gen 13, 4, 5, 6 or highernumber of usb ports type c1, 2 or highernumber of vga ports1 or highernumber of hdmi ports1 or highernumber of dp ports1 or highermonitoravailibility of monitoryes as per is 13252 part 1display technologyled backlit lcd liquid crystal displayscreen size in cms53.1 - 58 20.91 - 22.83, 58.1 - 63 22.87 - 24.8maximum resolution pixels1920 x 1080 full hdmonitor porthdmi, vgaintegrated webcam with micyes, noinput devicesmouse connectivityusb wired, wireless or higherkeyboard connectivityusb wired, wireless or highertype of keyboardstandardwarrantyon site oem warranty inyear3, 4, 5 or higher /speci cation i i /specificationname 8 8 g g /bid requirementallowed values //b y b y /consignees/reporting officer and quantity4 / 14 :. .:. ./s.no. //b y b y /consigneereporting/officer /address /quantity /deliverydays1adisekhar munga530031, central storesbuilding visakhapatnamsteel plant830computer monitor 15 pieces i i /technical specifications* i / as per gem category speci cation /speci cation i i /specificationname 8 8 g g /bid requirementallowed valuesstandardsdescription of storea monitor is an electronic visual display device thatoutputs the video signal generated by a computer. itis essentially a screen that shows text, images, andvideos, allowing users to interact with the computersgraphical user interface gui. it comes with a tablemount for support, a power cable and/or adapter, ports for connectivity and 1 year minimum on sitewarrantyconstructionpanel typein plane switching ips or higherdisplay technologyled backlit lcd liquid crystal displayscreen form factorflatdimensionmaximum resolutionpixels1366 x 768 hd, 1440 x 900, 1920 x 1080 full hdscreen size in cm48.1 - 53 18.94 - 20.87, 53.1 - 58 20.91 - 22.83brightness in nits301 to 350, 350 to 500 or higherconnectivity portsinput port1- hdmi port, 1- vga port //b y b y /consignees/reporting officer and quantity:. .:. ./s.no. //b y b y /consigneereporting/officer /address /quantity /deliverydays1adisekhar munga530031, central storesbuilding visakhapatnamsteel plant1530special terms and conditions-version:5 effective from 06-06-2025 for category entry and mid leveldesktop computer5 / 14 . for buyers:the category has been created in accordance with the model technical specification issued by theministry of electronics and information technology meity vide letter no. w-43/4/2020-iphw dated 19thaugust 2024, and is based on the parameters defined therein. the specifications applicable to thiscategory are as per the meity model technical specification dated 19th august 2024. accordingly, buyersshall not specify or mandate any particular processor, processor brand, or manufacturer in the additionalterms and conditions atc. in this context, reference may also be made to clause 2e of the gemgeneral terms and conditions gtc, which inter alia states: the specifications shall identify the keyparameters defining the products with all necessary validations related to configuration, type of data, restrictions, range / allowed values, allowed units etc. sellers as well as buyers while offering / buying thegoods / services shall have to comply with the validation rules / restrictions provided for in the categoryspecification. buyers / sellers cannot add parameters and / or drop down values not provided for incategory specification. in view of the above, buyers are not permitted to amend or modify any technicalspecification through the additional terms and conditions, and must ensure full compliance with thepredefined category specifications1productverificationa unique device serial number shall be provided by the seller at the time of supply, which is mentioned on the product. the buyer/consignee shall be able to verify thecomplete product details, including configuration, through the oem website. thebuyer/consignee should be able to perform these verifications without needing tocreate an account on the oem website.2operatingsystem1. there is no requirement that the oem of the desktop systems should be adevice partner of microsoft and holding a microsoft authorization form maffrom the software provider.2. microsoft os may be sourced directly from microsoft by oems holding devicepartner status, and those not holding device partner status may source fromauthorized distributors, i.e., ingram/reddington and their authorized channelpartners.3. buyers may ensure that maf shall not be made a mandatory requirement inbids.4. if supplies are made as per brands of oems who are global device partners, then the serial number of the machine supplied can be used to check thedetails of the product from the website of the oem.5. in the case of local device partners of microsoft, os details such as the digitalkey number should be produced with supplies, and the buyer may verify themfrom microsoft.6. in case of other oems who are sourcing from authorized distributors ofmicrosoft, reddington, or ingram, a copy of the invoice which contains therelevant serial number of windows os shall be submitted with supplies, andthe buyer/consignee can verify the same from the os server website or bytelephone, or both.7. in respect of verification of os, the consignee shall take necessary steps at thetime of acceptance. for device partner machines, buyers can check thecomputer oem website to verify the os by entering the pcs serial number andpart code number. for entities that are not device partners and source os fromdistributors networks, they may verify the serial number through the microsoftwebsite or by telephone, or both.8. in case the product offered is with a dos or linux operating system, suchverification of os shall not be applicable.9. buyer shall request for windows hardware compatibility certificate for windowoperating system to ensure the supplied hardware is compatible with windowsoperating system3requirementof oem logo buyers are advised to note that incorporating a condition stipulating an oem logo onthe motherboard is restrictive and may not be incorporated into the bids.6 / 14 processorsintel and amd processors are added as per model technical specification of desktopcomputer issued by ministry of electronics and information technology meity-iphwdivision w-43/4/2020 dated 19 aug 20245scope ofinstallationinstallation requirements shall be indicated in the bid by the buyer under theinstallation, commissioning and testing in bid ict clause. in case installation isspecified in the bid, it shall be the responsibility of the seller to ensure that allsystems are installed and satisfactory working is shown to the consignee orauthorized representative of the buyer. however, in case of direct and l1 purchase, installation of the computer system by the seller/oem is mandatory. installation doesnot include the supply of antivirus, ms office, etc., which are to be separatelyprocured by the buyer only.6buyer/consignee obligationsrelating toinstallationit is necessary that the buyer/consignee provide the seller or authorizedrepresentative access to locations, areas, or rooms for the installation of equipment.the seller or authorized representative will install systems and connect them toexisting power lines/networking at no additional charge. the buyer/consignee will beresponsible for electrical wiring, networking, or any other work connected to theinstallation area. the seller shall be only responsible for ensuring the setup of thedesktop systems, configuring, etc., as well as loading software etc. to be provided bythe buyer/consignee. any other site preparation required before installation andconnection of the desktop shall be the responsibility of the buyer/consignee. thebuyer/consignee, if required, will provide space at the installation site for the safestorage of tools, test equipment, and other materials used for installation at nocharge. in case there is a requirement of obtaining an entry pass for allowingrepresentatives to the premises, the same shall be arranged by the consignee.similarly, if there is a requirement of a gate pass for bringing items required forinstallation, the same is to be arranged by the consignee. in scenarios where multiplelocation installations are required, the buyer must indicate complete installationaddresses in the bid document. in the case of other modes of purchase, as soon asthe order is placed, complete details regarding installation may be informed to theseller. this ensures smooth coordination and delivery of products to the respectivelocations.7warrantythe buyer may ensure that as soon as supplies are received, a request for a warrantycertificate is made, along with logging into the oem website/call centre to verify thecertificate.8om related tomii, localcontent andmeity adviceon modeltechnicalspecifications buyers are requested to refer to various oms pertaining to dpiit and meity, as issuedfrom time to time, while making procurement and follow relevant provisions asapplicable.7 / 14 check pointsduringacceptance ofsupplies before generating the consignee receipt and acceptance certificate crac, theconsignee may inspect the system condition and verify that it complies with theagreed specifications and configurations. in the case of a large number of units to beprocured, then the buyer may opt for bidding and accordingly stipulate conditionsregarding installation, inspection by consignees/inspection agency. consignees whoreceive the supplies should be vigilant and should complete checking to ensure thatthere is no scope for the supply of refurbished products. at the time of receivingsupplies, the consignee may adhere to the following to ensure that any discrepanciesin supplies can be flagged, taken into account, and reflected while generating thecrac: i. packing should be checked properlyii. a warranty certificate from the oem should be insisted upon and checked.iii. instruction manuals and the os installed should be checked.iv. the machine serial number should also be checked through settings and canbe verified from the oem website. the above points are for guidance, and thebuyer/consignee may take steps considered suitable by them for checking atthe consignee end before acceptance of systems.v. an escalation matrix for customer grievance redressal shall be insisted uponby the buyer from the seller at the time of delivery.10hdd/ssdstorageretentionbuyer may add their requirement of retention of securely store all hard disk driveshdds or solid-state drives ssds used in the desktop computer under atc clause.11higherconfigurationthe buyer may permit products delivered with advanced usb standards. for example, a usb type-a 3.2 gen 2 port may be acceptable in place of usb type a port version3 point 2 gen 1 for seller:1oem websitelink/part nofor productverification the oem shall share the oem website link with the buyer at the time of delivery. theoffered model details/configuration should be available on their website. a uniquedevice serial number shall also be provided at the time of supply, which is alsomentioned on the product. the buyer/consignee shall be able to verify the completeproduct details, including configuration, through the shared oem website link.2changing oraltering theconfigurationthe seller must refrain from changing or altering the configuration of the factory pre-loaded machine. the machine should be delivered to the consignee in its original, factory-approved configuration.3warrantythe seller shall furnish a valid warranty certificate/tag from the oem to thepurchaser, guaranteeing the products coverage under the specified warranty terms.the warranty certificate should be verifiable through the oem website/customer carecentre.4compliance ofextendedproducer sresponsibilitywith effect from 1.4.23, as per the e-waste rules 2022, epr registration is mandatoryfor manufacturing entities. therefore, all oems shall hold valid epr registration, andthe registration number should be reflected in the catalog parameter. oems shallensure compliance with all responsibilities as per epr registration applicable fromtime to time.5mandatory /statutoryrequirementsas applicableoems shall have to ensure compliance with the mandatory/statutory requirements asper the government of india notifications issued from time to time for hardware andsoftware components, as applicable.6operatingsystem1. it shall be the responsibility of oems to ensure that supplies are made withgenuine operating systems.2. seller shall ensure to have windows hardware compatibility certificate forwindow operating systems8 / 14 scope ofinstallation it shall be the responsibility of the seller to ensure that all systems are installed, andsatisfactory working is shown to the consignee or authorized representative of thebuyer. however, in the case of direct and l1 purchase, installation of computersystem by the seller/oem is mandatory.8categoryspecification1. the seller may list products with advanced usb standards. for example, a usbtype-a 3.2 gen 2 port may be acceptable in place of usb type a port version3 point 2 gen 12. the supply of the monitor shall be in accordance with the parameteravailability of monitor. the details mentioned under description of storeregarding the monitor are applicable only if the monitor is being supplied.special terms and conditions-version:2 effective from 31-01-2025 for category computer monitor1. the product in gem marketplace direct purchase & l1 purchase comes with a minimum standard on sitewarranty of one year. in case the seller has standard warranty more than one year, the same may bementioned in the catalogue including in the model name and in such case higher warranty offered shallprevail/supersede the minimum one year warranty.: : v v \ \/buyer added bid specific terms and conditions1. genericoption clause: the purchaser reserves the right to increase or decrease the quantity to be ordered upto 25 percent of bid quantity at the time of placement of contract. the purchaser also reserves the right toincrease the ordered quantity up to 25% of the contracted quantity during the currency of the contract atthe contracted rates. the delivery period of quantity shall commence from the last date of originaldelivery order and in cases where option clause is exercised during the extended delivery period theadditional time shall commence from the last date of extended delivery period. the additional deliverytime shall be increased quantity original quantity original delivery period in days, subject tominimum of 30 days. if the original delivery period is less than 30 days, the additional time equals theoriginal delivery period. the purchaser may extend this calculated delivery duration up to the originaldelivery period while exercising the option clause. bidders must comply with these terms.2. buyer added bid specific atcbuyer added text based atc clauses1.material: procurement of desktop based programming hmi unit and monitor.please submit gem bid document duly stamped and signed .2.delivery schedule: as per bid document. however, rinl-vsp reserves the right to revise the delivery schedules, depending on vsp s production requirements and storage capacity, without any change in price, terms and conditions of po.3. rinl reserves the right to negotiate with the tenderers without prejudice to their quoted price.4. inspection: inspection at r.i.c. central stores department, r.i.n.l., visakhapatnam steel plant, visakhapatnam-530031, andhra pradeshtest certificate not applicable5.number of sources: 01 one :the intended number of source is one . however, the bid quantity may be split in two sources as per the mii and mse policy of buyer; subject to purchase preference to eligible mses and make-in-india suppliers; subject to matching l1 price by any of the tenderers from l2 onwards in the order of ranking. if none of the l2 tenderers onwards matches the l1 price, then full tendered quantity may be ordered on the l1 tenderer.6.purchase preference: purchase preference will be accorded to micro & small entrepreneurs mses/ssis and make in india class-1 local suppliers mii class-1 as per the prevailing orders / policy of govt. / rinl, subject to fulfillment of eligibility and submission of requisite / stipulated documents in support ofeligibility and subject to matching of l-1 lnip price. 7.conditions for availing benefit is detailed under cl.no. 8.0 of detailed terms and conditions of invitation to supply tender ref vsp s website: www.vizagsteel.com.9 / 14 .for the purpose of this bid, the order of preference public procurement policy ppp & make in india mii is as under:a local mses - till the total quantity on local mses equals or exceeds 50%.b aimses - till the total quantity on aimses including local mses equals or exceeds 25%.c mii class 1 local suppliers - till the total quantity on class 1 suppliers equals or exceeds 50% d others including mses/non mses/ mii/ non mii in the order of ranking9.price firmness: price shall be quoted in rs. per no. for supply on for vsp stores basis inclusive of material price, freight, transit insurance, taxes / gst, etc. and the price finalized shall remain firm till completion of supplies. gst shall be applicable on all penalties like liquidated damages, penalties for variation in material specification, risk purchase recovery, shortages, penalty for late lifting/ delivery, forfeiture of emd / pg bond/ security deposit etc if levied by the purchaser on the seller/supplier and shall be recovered along with gstapplicable thereon. the purchaser shall issue tax invoice in favour of the seller/supplier for such recoveries. 10.not-withstanding anything specified in this tender document, rinl at its sole discretion, unconditionally and without having to assign any reason, reserves to itself the right: to accept or reject the lowest priced tender or any other tender or all the tenders; to accept any tender in full or in part quantity; to reject the offers not conforming to the tender terms and to accord purchase preference to public sector undertakings wherever applicable as per government policy/ guidelines. to extend purchase preference to local & non-local ssis / mses micro and small enterprises, subjectto submission of documents as stipulated. 11.terms of payment: 100% payment of the value of each consignment shall be made against submission of bills along with vsp s acceptance garn goods acceptance / rejection note. payment shall be released on 60th day 21st day for local micro and small enterprises and 45th day for non-local mses, subject to submission of documents as stipulated for availing mse benefits from the date of acceptance of material at vsp i.e. garn date.payment shall be made by neft/rtgs mode or such other mode of electronic fund transfer offered by banks. tenderers must furnish the required bank account details to vsp in prescribed proforma so that the same can be updated in vsp s database. 12.emd and performance guarantee bond: not required 13.right to accept/reject offers:rinl/vsp does not pledge itself to accept the lowest priced offer or any other offer and reserves to itself the right of accepting the whole or any part of the tender/offer or portion of the quantity tendered and the tenderers bidders shall supply the same at the rate quoted.14.liquidated damages: shall be as per gem gtc clause no. 15. iii with following addition/modification: subject to a maximum of 10% of value of such consignments, excluding taxes. for levy of ld in case of late delivery, date of receipt of material by rinl-vsp stores along with necessary documents shall be considered as date of delivery, subject to acceptance of material by rinl-vsp after inspection. 15.establishment of credibility of non-enlisted/non-assessed vendors: if a tenderer who responds to this bid is presently not enlisted with rinl-vsp as an approved vendor, and/or those tenderers for whom vendor assessment is not done by gem for the category desktop based programming hmi unit and monitor, has to upload the following documents in the offer/bid in gem:notarized statutory manufacturing / service industry registration certificate, i.e., empartiiissuedbydic/nsicregistration certificate / udyog aadhar memorandum for the same/similar tendered itemsfor mses.ornotarized copy of certificate of registration of shops and establishments for a dea1er/agent/trader etc.or10 / 14 notarized copy of certificate of incorporation along with memorandum and articles of association of the private/public limited companies.ii notarized copy of proprietary/partnership deeds in case of proprietary/partnership firms.iii notarized copy of gst registration certificate and pan card copy in the name of company in case of limited companies or in the name of individuals in case of proprietary firms.iv self-attested financial worth and audited financial statements for the last three 3 years.v self-attested copies of purchase orders/contracts for the same or similar tendered item/s.vi self-certified iso certificate, if any.vendor assessment report has to be submitted by the bidders for whom vendor assessment is already done by gem for the category desktop based programming hmi unit and monitor16.bidder shall have minimum 20% domestic value addition class-i or class-ii local supplier as per orderno. p-45021/2/2017-pp be-ii dt. 04.06.2020 of dpiit, ministry of commerce, goi and shall submit declaration as per format at annexure-ii of this atc along with their techno-commercial bid. 17. documents to be uploaded: by the bidder/seller during bid participation in gem: this bid document, specification sheets, drawings, corrigendum if any, etc. duly signed and stamped by bidder on all pages, confirming acceptance. bidders must select the mse option to claim mse benefits while submitting the offer on gem itself and upload their udyam registration for same/

Related Searched Keywords : cover all suit

List of cover-all-suit Tenders

Get cover all suit Tender Alert...

Related Searched Keywords : cover all suit

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us