Filters

List of connector screw Tenders

List of latest connector screw Tenders in Indian Tenders. Click on any connector screw Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for connector screw Tenders.

All-Tenders (24)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :35789290 | 11 Nov, 2025

Tender Value : 19.67 Lacs

Imphal - Manipur

Tender for gem bids for mcb 10 amp sp with enclosure box mild steel mcb 20amp sp 240 volts mcb 32 amp dp 240 volts mcb 40amp dp 240 volts led batten surface 4ft long 18woutput 1600 lumens per watt with suitable powder coatedframe end caps and connector led bulb 9w 220-240 volt led bulb 11w 220-240 volt security light fitting for 200watt led batten holder bakelite angle type isi marked modular switch piano flush type 6 amps 240 volts singlepole one way isi marked pvc sheathed unarmouredstranded copper conductor cable of size 25sqmmconforming to isi marked 90m roll pvc sheathedunarmoured stranded copper conductor cable of size1sqmm conforming to isi marked 90m roll pvc sheathedunarmoured stranded copper conductor cable of size15sqmm conforming to isi marked 90m roll pvc switchboard 4inch x 4inch conforming to is pvc switch board6inch x 4inch conforming to is change over switch 32amp 4 pole change over switch 63 amp 4 pole m pvcswitch board 8inch x 10inch conforming to is waterdispenser 20 ltr capacity with bottle voltas automaticchange over 63 amp socket 3oblique 6 pin 5 oblique 15amp 240v isi marked ceiling fan 1200mm sweep withelectronic regulator conforming to is socket 3 oblique 5pin 5 amp 240v isi marked flexible cable twin twisted rollof 90 mtr 23oblique 0point0040 conforming to is pedestalfan 400mm sweep condenser 25 mfd for ceiling fan isimarked 2 core cable aluminium size 10 sqmm conformingto isi marked 90m roll m 2 core cable aluminium size 6sqmm conforming to isi marked 90m roll pvc conduit pipe20 mm isi marked switch piano 5 amp 240v isi marked switch socket combination 15 amp 240v with gang box isimarked switch socket combination 5 amp 240v with gangbox isi marked wall mounted fan 400mm sweep bid number gem2025b6848426 dated 01-11-2025 bid document1 101 0 0 conforming to is, mcb 32 amp sp 240 volts, , switch piano15 amp 240v isi marked, exhaust fan 400mm, mcbdistribution box 6 way spn, mcb 63amp tpn 240 volts, , change over switch 100 amp four pole, , insulation tape 3oblique 8inch wide 9 mtr roll, mcb 16amp sp 240 volts, m, gi pipe 20mm bore 6m long medium grade, , gi pipe 15mmbore 6m long medium grade, , gi reducer tee 20 x 15mm isimarked, gi tee 15mm bore isi marked, gi tee 20mm boreisi marked, gi socket 20mm bore isi marked isi marked, gi socket 15mm bore isi marked isi marked, gi elbow15mm bore isi marked, gi elbow 20mm bore isi marked, gi nipple 20mm bore 100mm long, gi nipple 15mm bore100mm long, pvc swr pipe 110m dia 3m long with socketend isi marked, pvc swr pipe 75m dia 3m long withsocket end isi marked, pvc swr tee 75 mm bore, isimarked, pvc swr tee 110 mm bore, isi marked, pvc bibcock 15mm, rivit machine, drill bit 6mm, tile cuttermachine make bosch, iron cutter blade 4, tile cutter blade4, hand grander 850w 12000rpm, cp cast copper alloypillar cock 15mm bore, wooden cutter blade 4inch, 2 hpmotor isi marked, pp-r pipe tee 15mm, fly catcher, geyser 10 ltr, spray machine, kitchen sink, pp r pipeelbow 15mm, pp r pipe union socket 20mm, ppr pipeunion socket 15mm, ppr pipe reducer socket 15 obliqu 20, hand z spray, cp cast copper alloy stop cock angle type15mm bore, mild steel corrugated galvanised ppgi sheet12ft x 3ft, 0.63 mm thick isi marked, mild steel corrugatedgalvanised ppgi sheet 8ft x 3ft, 0.63 mm thick isi marked m, mild steel corrugated galvanised ppgi sheet 10ft x 3ft, 0.63 mm thick isi, mild steel corrugated galvanised cgisheet 8ft x 3ft, 0.63 mm thick isi marked, mild steelcorrugated galvanised cgi sheet 6ft x 3ft, 0.63 mm thick isimarked, acrylic sheet 3mm thick for window panes 6ftx4ft, plywood commercial bwr grade isi marked of size 4ft x 8ft, 12mm thick, m seal 100 gm, chunna, teflon tape 3oblique8inch wide 10 mtr roll, membrane 4040, 20inch x2ft jumbo filter, geru, plywood commercial bwr grade isimarked of size 3ft x 6ft, 12mm thick, gi binding wire1.20mm dia, welding rod pkt of 100 electrodes, measuringtape 50 mtr, tripple layer hdpe water storage tankcylindrical vertical with closed top 500ltrs capacityconforming to is specification, tripple layer hdpe waterstorage tank cylindrical vertical with closed top 1000ltrscapacity conforming to is specification, tripple layer hdpewater storage tank cylindrical vertical with closed top 200ltrs capacity conforming to is specification, self tappingscrews with ppdm washer 75mm long, brass screwwood 6x 75mm 200 nos, pvc frame looking mirror 15inch x 18inchselect quality glass, cp towel rail 600 mm long 20mm diawith bracket, app water proofing membrane 3 mm thick 1mwide 10 m long, painting brush 25mm standard quality, painting brush 50mm standard quality, painting brush75mm standard quality, painting brush 100mm standardquality, synthetic enamel paint high gloss superiour qualitywhite colour, synthetic enamel paint high gloss superiourquality green colour, synthetic enamel paint high glosssuperiour quality og colour, synthetic enamel paint highgloss superiour quality yellow colour, synthetic enamelpaint high gloss superiour quality red colour, coarseaggregate 20mm obliqu 40mm obliqu 63mm dimapur sandconforming to is 383, 1978., mild steel wire nails 2inch, mild steel wire nails 1inch, mild steel wire nails 6inch, emery cloth 100mm wide various grades, mild steel slidingdoor bolt 250mm, floor door stopper aluminum 50mm, s //bid details2 / 101 steel hinges 100mm, taping screw 1inch with washer, taping screw 3inch with washer, brick 9 x4.5x3 inch, coirmattress of size1.83m x 0.9m x 75mm thick comprising of50mm thick high density coir, hdpe sand bags of size14inch x 36inch, weight not less than 60 gms., red cushionchair, thinner for paint, ordinary portland cement 43grade in hdpe bags of 50kg each, confirming to is269, 1976, hesco bastion bags of size 0.60m x0.45mx0.60m, oil filter genr set 30 kva, fuel filter genr set 30kva kiloskar, air filter genr set 30 kva kiloskar, fan beltgenr set 30 kva kiloskar, engine mounting pad genr set 30kva kiloskar, fuel pipe line filter to pump 19x19 genr set30 kva kiloskar, fuel feed pump genr set 30 kva kiloskar, tapped cover gaskit genr set 30 kva kiloskar, injector genrset 30 kva kiloskar, cylinder head gasket genr set 30 kvakiloskar, battery 12v 120ah, battery lead, fuel tank capgenr set 30 kva kiloskar, oil filter genr set 15 kva kiloskar, fuel filter genr set 15 kva kiloskar, air cleaner filter genrset 15 kva kiloskar, fan belt genr set 15 kva kiloskar, engine mounting pad genr set 15 kva kiloskar, fuel pipeline filter to pump genr set 15 kva kiloskar, fuel pumpassembly genr set 15 kva kiloskar, tapped cover gaskitgenr set 15 kva kiloskar, avr genr set 15 kva kiloskar, push button genr set 15 kva kiloskar, exhaust fan genr set15 kva kiloskar, battery 12v 88ah, fuel filter pairs genrset 30 kva kiloskar, oil filter elements genr set 30 kvakiloskar, silencer genr set 30 kva kiloskar, anabond, water saperator genr set 30 kva kiloskar, benjo washers17x19 genr set 30 kva kiloskar, avr genr set 30 kvakiloskar, oil filter genr set 40 kva harrison, fuel filter genrset 40 kva harrison, air filter genr set 40 kva harrison, fan belt genr set 40 kva harrison, fuel pipe line filter topump genr set 40 kva harrison, fuel feed pump genr set40 kva harrison, oil filter genr set 58.5 kva harrison, fuelfilter genr set 58.5 kva harrison, air filter genr set 58.5kva harrison, fan belt genr set 58.5 kva harrison, fuelpipe line filter to pump genr set 58.5 kva harrison, corksheet size 1m x 1m genr set 58.5 kva harrison, fuel feedpump genr set 58.5 kva harrison

Central Government/Public Sector

TRN :35789353 | 25 Nov, 2025

Tender Value : 0

New Delhi - Delhi

Tender for gem bids for 612 80099 hose 3 by 8 bsp 530mm long 613 05400 hose1 by 2 bsp x 1100 613 09201 hose aux valve to bulkhd 613 23100 hose 1 by 2 inch bsp x 1015mm 646 04449cover pre cleaner top 646 04450 stud pre cleaner 64604624 spacer locking unqin 646 04628 washer thrust 650 10166 adaptor hose connector 16mm od 701 58821decal hazard switch 701 58822 actuator 4wd switch 701 58824 decal road lamps switch 701 58826 actuatorswitch front worklights 701 58827 actuator switch 70160000 switch 12v 701 60002 switch panel 701 60004switch panel 701 60005 panel 12v 2 position 701 80265switch panel blank 701 80324 switch oil temp 5 by 8 inchunf deutsch connector 701 80416 cover hydraclampswitch soft touch 701 80458 sensor vacuum 80m bar 701 m7305 switch oil pressure m12 701 y1372 switchignition 716 05703 5 amp fuse 716 05704 7 point 5 ampfuse 716 05706 15 amp fuse 716 05707 20 amp fuse 716 30126 sensor water temperature 716 30252 relaygrid heater 12 volt 718 56105 strap braided earth 400mmlong cross over pipe mtg 730 03602 band 808 00296bush 808 00297 bush 809 00176 bearing liner 81120061 pin pivot 45x300mm 811 50368 pin pivot 81150369 pin pivot 45 x 290mm 811 50483 pin pivot 81150520 pin pivot 811 50530 pin pivot 811 70099 pin boomlock 811 80001 pin pivot 811 80004 pin pivot 81190198 pin pivot 172mm long with groove 811 90469 pinpivot 811 90485 pin pivot back 813 00456 seal pivot pingrease 813 10175 gasket valve block 813 50012 sealbrake piston 813 50026 seal brake piston square section 813 50027 gasket 813 50041 seal rear 813 50042gasket 813 m7603 ring backup 813 m7604 ring backup 814 00222 spring 814 00297 spring compression 81400345 spring 814 00354 spring 814 00365 spring bid number gem2025b6733793 dated 04-11-2025 bid document1 101 1 1 compression, 814 00441 spring torsion, 814 10115 discspring spline, 814 10170 spring compression, 814 10179spring, 816 00189 cap pipe, 816 00196 cap blankingsteel 3 by 4 inch bsp, 816 00464 adapter elbow malefemale, 816 13351 adapter m f with 5 by 8 inch tapping, 816 13382 adapter hose, 816 15184 adapter 1 by 2 inchbspx1 inch unf, 816 20049 adaptor, 816 20070 adapter, 816 60040 nipple screw, 816 60050 adapter, 816 60066adapter, 816 70009 connector banjo, 816 75016 boltbanjo, 816 80012 plug magnetic 3 by 4 inch bsp, 81680037 plug filler 33mm head see ti gen245, 816 80051plug 1 by 8 inch tapered, 816 80052 plug taper 1 by 4 inchbsp, 816 90006 adaptor filtered m m, 816 90020 adaptor, 816 90163 adopter elbow, 816 90176 adaptor, 81690277 adaptor tee, 816 90459 adaptor elbow 7 by 16saex 1 by 4bsp, 816 90676 adaptor 90deg elbow 9 by 16 saex g1 4 hydra clamp, 819 00049 shim 1 point 4mm, 81900070 shim 0 point 5mm, 819 00071 shim 1 point 5mm, 819 00097 spacer, 819 00100 shim 120x60 point 5x1 point4 thick, 819 00132 spacer grey 50 point 75 borex3 point5mm thick qty max 1 min 0, 819 00133 spacer cream 50point 75mm bore x 4 point 0mm thick qty max 1 min 0, 819 00134 spacer yellow 50 point 75mm bore x 4 point5mm thick qty max 2 min 1, 819 00135 spacer blue 50point 75mm bore x 5 point 0mm thick qty max 1 min 0, 819 00136 spacer red 50 point 75mm bore x 5 point 5mmthick qty max 1 min 0, 819 00137 spacer red 50 point75mm bore x 6 point 0mm thick qty max 1 min 0, 82100190 clip e, 821 00296 circlip external, 821 00332 clip etype, 821 00335 clamp plate, 821 00496 plate clamp, 821 00523 circlip, 821 10223 circlip internal, 821 10354circlip, 823 00220 shim 1 point 40mm thick, 823 00237shim 0 point 95mm thick, 823 00291 washer copper m8, 823 00372 washer copper m12, 823 00451 washer thrust38 point 1mm x 55 point 55mm x 1 point 55mm, 823 10264washer thrust 50 point 15mm x 78mm x 3 point 51mm, 823 10265 washer thrust 3 point 52mm, 823 10266washer spring retainer, 823 10270 washer thrust71x150x6 point 05, 823 10297 washer hardened, 82310316 washer thrust bevelled, 823 10331 washer tablefthand, 823 10332 washer tab righthand, 823 10347shim 0 point 5 0 pont 6mm o dia 65mm a r, 823 10355spacer, 823 10364 washer thrust 35 point 15mm x 60mmx 3 point 51mm, 823 10638 shim 82 od x 71 id x 0 pont5thk as required, 823 10704 shim 82 od x 71 id x 1 point5 thk as required, 826 00303 bolt plough 3 by 4 inch unfx 70mm, 826 00614 circlip, 826 00818 pin tension, 82600820 nut, 826 00871 nut, 826 00919 dowel, 826 00926nut left hand thread, 826 00927 joint ball, 826 01099rivet nut m6, 826 01144 tie cable 200mm, 826 01249 nutrivet m10, 826 01265 bolt dowel, 826 01559 screwsocket button head flanged, 826 01627 nut rivet m8, 826 01714 nut 1 inch unf, 826 10467 circlip internal, 82610648 plug locking, 826 10669 pin hinge cab door, 82611353 bolt 1 inch unf x 8 inch long torque 607n m, 82611635 screw cap screw 3 by 4 unfx3 by 4, 828 00196 oring, 828 00224 o ring 39 point 7mm i d x 3 point 53mm, 828 00414 o ring 123 point 5mm i d, 829 00548 bush, 830 00314 ferrule rubber, 831 00117 bearing, 904 14300seal ring turquoise, 904 20172 seal triple lip to suit 55point 0 54 point 81 shaft brown, 904 20226 sealtransmission pump, 904 20336 seal hydra clamp, 90450024 seal ring, 904 50040 seal, 904 m6779 seal, 90720043 bearing taper roller, 911 12400 pin pivot 306mm //bid details2 / 101 long, 911 40104 pin ss kingpost bottom pivot circlipretention, 914 49100 shaft drive 2ws 4wd, 914 60223driveshaft rear ss700 sideshift, 914 88100 shaft driveassembly 1275mm long, 914 88200 shaft drive assembly825mm long, 914 m4448 driveshaft, 991 00156 kit sealpower track rod ram 75mm cyl x 45mm rod, 331 31205gaiter excavator lever, 332 y3852 throttle cableassembly, 320 07280 filter fuel assembly, 333 y6130water seperator assembly, 331 31071 catch windowlockback, 332 y8135 plate brake friction

Central Government/Public Sector

TRN :35774463 | 22 Nov, 2025

Tender Value : 0

Port Blair - Andaman And Nicobar Islands

Tender for gem bids for er6150b-101131 pressure maintaining vlave, er6150b-103216 motor of filter pump type 1 1 kw, er6151b-100100202035 neck ring p 45, er6151 b-100100202055 neck ring retainer, er6151b-100100203031 mechanical seal p 105, er6151b-100100203032 sleeve gasket p37, er6151b-100100203046 bearing ring p 47a, er6151b-100100203055 neck ring p 45, er6151b-100100203056neck ring retainer, er6151b-100100203065 split pin, er6151b-100103001047 kit gaskets, er6151b-100103203053 retainer for seal ring p111, er6150b-705104 hp pump driving belt set, er6151b-00249level switch, er6151b-100125101053 lip seal o b p49, er6151b-100920303002 high pressure relief valve, er6151b-101100103105 circuit breaker 4 to 6 3 amps, er6151b-101200102003 pressure gauge 0 10bar, er6151b-101800504003 hp hose 1 idx1 vicx1500l saf2507, er6151b-131200291004 high pressuretransmitter 4 to 20 ma pt60, er6150b-100200125076female adaptor, er6151b-100125101036 i b bearingp16, er6151b-100125101039 o b bearing p18a, er6151b-100125101040 circlip internal p18b, er6151b-100125101049 o-ring bearing housing p33b, er6151b-100125101050 deflector p40, er6151b-100125101051 breather p45, er6151b-100125101052lip seal i b p47, er6151b-100125101056 cover gasketp73, er6151b-100200131901 ho pump seat kit, er6151b-100200131902 hop pump valve kit, er6151b-100210106034 charging plug screw, er6151b-100210204001 pulsation damper, er6151b-100300210072 motor for h p pump 415v 1 4kw, er6151b-100700157001 3-waysolenoid vvd20, er6151b-100700246005 abs ball valve 2 way 32 mm, er6151b-10070040100t flow meter 600-6000lph, er6151b-100700402003 flow meter 150-1500lph, er6151b-100700405004 flow switch, er6151b-100803116102 victaulic couplings 1 1 4, er6151b-100805414101 straight connector 1 4 m x pu 4, er6151b-100900305012 smcv valve unit for 3 by4valve, er6151b-101200291004 pressuretransmittero 100bar, er6151b-101200502011 levelswitches for cleaning tank, er6151b-101200502012level switches for permeate tank, er6151b-101200602001 conductivity meter, er6151b-101900263001 tapper bush for hp motor, er6151b-102000501003 av mount for pk20, er6151b-130802604017 adaptor for hp discharge ro 1531, er6151b-130805214904 1 4 fxpu4 elbow, er6151b-ank00296 hp pump driving belts, er6151b-zaa00364e-spare kit ro 1530, er6151b-zpp00257 hp pump valveseal kit

Central Government/Public Sector

TRN :35775098 | 24 Nov, 2025

Tender Value : 0

Darjeeling - West Bengal

Tender for gem bids for tiles ceremic 300x300mm, load bearing concrete hollowblocks of size 400mm x 200 mm x 200 mm, cement opc43 grad, pbs roll of size and 20.00 mtr long, tarpaulinehdpe laminated 30x20 ft, water proof tarpaulin polythene30x30 ft, wall putty, glass putty, synthetic enamel paintcolour black, synthetic enamel paint colour white, synthetic enamel paint colour og, synthetic enamel paintcolour red, synthetic enamel paint colour blue, syntheticenamel paint colour yellow, synthetic enamel paint colourgreen, synthetic enamel paint colour brown, syntheticenamel paint red oxide, paint brush 2 inch, paint brush 3inch, paint brush 4 inch, pvc door handle, pvc doorhinges, pvc door size 7 x 3 ft, thinner, white cement, black screw 1 inch, black screw 1 point 5 inch, self tapingscrew 25mm, star head screw, chinese screw 1 inch, plywood 8 x 4 x 6mm thick, nails 2 inch, nails 3 inch, hdpelaminated sand bag of size 75 x 40 cm, door curtain rod, ss curtain bracket, cgi sheet 810 x 3050 mm long 0.5mmthick 10 ft, led tube light fitting 1 x 12 w 2 ft, led tubelight fitting 1 x 18 or 22 w 4ft long, led bulb 5 w, ledbulb 7 w, led bulb 9 w, led bulb 12 w, led securitylight 20 watt, 2 core copper wire 3 mm, pvc insulatedcable 1 point 5 sqmm single core copper conductor, pvcinsulated cable 1 point 5 sqmm 2 core copper conductor, cable pvc insulated unsheathed single core flexible copperconductor 1100v grade of size 2 point 5 sqmm, pvc switchbd 4 x 4, pvc switch bd 6 x 4, pvc switch bd 6 x 8, switchsocket 5 amp with box, switch socket 15 amp with box, switch 5 amp, switch 15 or 16 amp, socket 5 amp, socket15 amp, switch socket combination 3 or 5 pin 5 or 6 amp, switch socket combination 5 or 3 pin 15 or 16 amp, plug 3pin 5 or 6 amp, plug 3 pin 15 amp top, insulation tape, pvc insulation tape 2 cm wide 10 mtr long, mcb 6 amp 240v, mcb 20 amp 240 v, mcb 10 amp sp, mcb 16 amps spwith box, mcb 32 amp sp with box, isolator 40 amp dp240v, mcb box b20, mcb box c20, mcb distributionboards in sheet metal enclosure 4 ways double door withblanks confirming to is 8623, mcb distribution bd sheetmetal 8 way, gi gang box 4 way, pvc exhaust fan 150mmsweep, pvc exhaust fan 300mm iron, bed switch on offswitch, piano switch 5 amps, pvc casing caping 25x16 mm, pendent holder, angle holder with skirt, angle holder, pvc ceiling rose 2 or 3 terminal, ppr pipe 20mm dia, pprpipe 3 layer dia 40mm 6 mtr long, ppr socket 40mm, pprtee 40mm, ppr elbow 40mm, ppr female threaded socket20 or 15 mm dia, pvc elbow 25mm, ppr socket 25mm, ppr union 40mm, pvc union 25mm, ppr tee reducer 40 or32mm, pvc tank connector 2 inch, tape teflon, pvcconnection pipe 450mm, towel rail cp 750mm long, hdpetank tank 500 ltr capacity, rotational mouldedpolyethylene water storage tank double layer 1000 ltrcapacity make star or comfort or sintex, bib cock brass15mm, pvc bib cock 20mm, brass stop cock 15mm, pvcstop cock 20mm, ball brass float valve 15mm, ppr stopvalve 20 mm, ball valve 1 inch 25mm, snow white coloureuropean wc with s or p trap concealed of size650x405x770m with sheet cover, wc indian type, wcindian type steel, waste pipe for wash basin, whb steel, wastage pipe for urinal pot, looking mirror 600mm x450mm, fire extinguisher 2 kg

Central Government/Public Sector

TRN :35763226 | 21 Nov, 2025

Tender Value : 3

Faridkot - Punjab

Tender for gem bids for cctv camera, cat 6 cable, rj 45 connector, hard disk, poe switch, poe rack, network video recorder nvr, nvrrack 9 u, smps for nvr, pvc batton, screw black, installation charges, amc charges, tape roll

State Government

TRN :35763340 | 10 Nov, 2025

Tender Value : 17.65 Lacs

Dausa - Rajasthan

Tender for major repair work under state budget head at govt. sss bilona kalan -demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster (ceiling): 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand) internal plaster : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :12mm thick. plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. panting on doors & windows :- painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of 240/415 v ac mcb with positive isolation of breaking capacity not less than 10 ka (b/ c tripping characteristic as per type of load and site requirement) 4kv impulse withstand voltage, as per pwd specification for electrical works with isi marked is 8828(1996) / conforming to iec 60898-1 2002, iec 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per iec, minimum phase termination capacity of 35sq.mm. , conductorline load reversibility, label holding facility , ip 20 contact protection and fitted with existing distribution board/sheets, min. operation 20,000 upto 32 a rating and 10,000 upto 63 a, 5000 for 80 a rating including making connections, testing etc. as required. . oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .6a to 32a rating. 50 a to 63a rating providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed un-arrmoured aluminium cable confirming to is:1554 p-i / is :7098 p - i of 1.1 kv with h4- grade electrolytic aluminium conductor confirming to is 8130 of purity >99.6 %, inner / outer sheath confirming to is:5831 in existing rcc / hume / stoneware / pvc pipe/ open duct/cable trench / cable tray (with cable tie) including testing etc. as required of following size. oem must have it's own in house nabl accrediated laboratory for testing procedure as per is:10810. for additional technical parameters of product / work refer annexure 'a' attached with this bsr 6.0 sq. mm 4 core providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating p & f isi marked (is:3854) 6 amp. flush type non modular switch with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material including cutting hole in tile and making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of of 3/5 pin 6 amp. flush type non modular socket made out from industrial grade polycarbonate or fire resistant abs material, brass terminal with porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .

State Government

TRN :35763827 | 10 Nov, 2025

Tender Value : 2.94 Lacs

Dausa - Rajasthan

Tender for major repair work under state budget head at gups narayanpura - demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). random rubble stone masonry with hard stone in superstructure above plinth level and upto five level above 30cm. thick walls in :cement mortar 1:6 ( 1-cement : 6-sand).cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." stone kharanja : random rubble dry stone kharanja under floor. panting on doors & windows :- painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work p&f rigid pvc pipe (is:4985 mark) class ii(4 kg. /cm.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant 110mm dia wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr

Central Government/Public Sector

TRN :35764509 | 11 Nov, 2025

Tender Value : 37.20 Lacs

Angul - Orissa

Tender for gem bids for hexagon screw, part no.voe60112611, propellershaft, part no.voe15076938, hexagon screw, partno.voe60114447, propeller shaft, partno.voe15076943, joint, part no.voe15097814, screw, part no.voe15117505, hexagon screw, partno.voe997465, filter, part no.voe11431792, o-ring, part no.voe982737, hose assembly, partno.voe15023913, hose, part no.voe17224544, sealingkit, part no.voe15111059, hydraulic valve, partno.voe17511833, hose assy, part no.voe11431668, hose assembly, part no.voe937998, hose assembly, part no.voe937280, contact kit, part no.voe17416725, rubber cushion, part no.voe16860170, flange screw, part no.voe60113111, flange screw, partno.voe60113130, hose assembly, part no.voe937036, hose assembly, part no.voe15098808, hose assembly, part no.voe15114894, hose assembly, partno.voe15098809, hose assembly, part no.voe15183178, hose assembly, part no.voe15025372, hose assembly, part no.voe15025373, hose assembly, partno.voe11148952, connector casing, partno.voe11093808, clamp, part no.voe11431482, connector casing, part no.voe11096888, clamp, partno.voe11301437, clamp, part no.voe11431481, o-ring, part no.voe960236, hose assembly, partno.voe11431018, hose assembly, part no.voe11431480, hose assembly, part no.voe15025868, hose assembly, part no.voe11302909, hose assembly, partno.voe11411351, hose assembly, part no.voe11411352, propeller shaft, part no.voe15076944, attachment, part no.voe11431296, testing nipple, partno.voe937695, hose assembly, part no.voe11173012, hose, part no.voe15019695, rubber hose, partno.voe943706, hose, part no.voe15174127, hose, partno.voe15019639, hose assembly, part no.voe17442037, hose assembly, part no.voe15107661, hose assembly, part no.voe15025301, hose assembly, partno.voe15099884, flange screw, part no.voe984816, flange screw, part no.voe60113132, washer, partno.voe11093833, shim, part no.voe15055282, shim, partno.voe15055278, shim, part no.voe15055286, rubberspacer, part no.voe4930053, spacer, partno.voe11093832, flange lock nut, partno.voe60113171, flange screw, part no.voe60113134, air filter, part no.voe16881340, gasket, partno.voe15123652, level sensor, part no.voe17202021, flange screw, part no.voe990861, flange screw, partno.voe60113097, flange half, part no.voe935312, flange half, part no.voe14048189, flange screw, partno.voe60113110, flange half, part no.voe935309, hex.socket screw, part no.voe956616

Central Government/Public Sector

TRN :35765733 | 14 Nov, 2025

Tender Value : 7.99 Lacs

Belgaum - Karnataka

Tender for gem bids for patch cord 2 mtrs bracket lc to lc connector bracket, patch cord 2 mtrs bracketsc e2k bracket, patch cord 2 mtrsbracket e2k to e2k bracket, patch cord 2 mtrs bracket e2kto lc connector bracket, ip bottle, ofc joint closer, splicing paper, pipe gi 3 inch, ac 1.5 ton, mcv tripper 16amp, io box with female rj 45 connector, rj 45 connector100 per pkt, lan switch 8 port unmanned, lan switch 16port unmanned, lan switch 24 port unmanned, rack ubracket junction box bracket, crimping tool, casing obliquecapping 3 inch x 3 inch, casing oblique capping 1 inch x1inch, l bend 3 inch x 3 inch, corner bend 3 inch, threeway 3 inch, l bend 1 inch x 1 inch, corner bend 1 inch, strait cover 1 inch, three way 1 inch, screw 1 inch, gitti 1inch, utp cable cat 6 bracket 305 mtrs bracket, earthing, sitc incl manpower support and installation

State Government

TRN :35765746 | 10 Nov, 2025

Tender Value : 4.90 Lacs

Jaipur - Rajasthan

Tender for demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). supply & stacking good soil of earth at site complete including loading unloading & transportation etc.good soil of earth filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :columns, pillars, posts and struts etc. centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.m20 grade nominal mix / design mix roviding m-25 grade concrete by using cement as per codal provision instead of m-20 grade design mix. providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating

Related Searched Keywords : connector screw

List of connector screw Tenders

Tender for gem bids for cctv camera, cat 6 cable, rj 45 connector, hard disk, poe switch, poe rack, network video recorder nvr, nvrrack 9 u, smps for nvr, pvc batton, screw black, installation charges, amc charges, tape roll

Get connector screw Tender Alert...

Related Searched Keywords : connector screw

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us