Filters

List of column-work Tenders

List of latest column-work Tenders in Indian Tenders. Click on any column-work Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for column-work Tenders.

All-Tenders (13)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :35950398 | 02 Dec, 2025

Tender Value : 0

Jammu - Jammu And Kashmir

Tender for gem bids for cordless drill machine heavy duty voltage of 18 volt, drillmachine heavy duty 650w, petrol engine concrete vibratormachine, elect welding machine 220 v, elect iron cutter 14inch, hy duty metal cutter blade of good quality, heavyduty iron hand cutter, hand grinder blade good quality, tile cutter machine heavy duty, riveting gun machineheavy duty hand held, pipe vise heavy duty make, die set, all type tool kit, pipe wrench 12 inch, pipe wrench 18inch, pipe wrench 24 inch, pipe wrench 4 inch, hexablade with frame, brick hammer, water level pipe 0.75inch, iron cutter blade 14 inch, iron drill bits all size, ironcutter blade 4 inch, tile cutter blade 4 inch, hand glovesfor work good quality, welding rod good quality, nylonrope 12 mm, good quality, plastic tirpal, protectionhelmet, jute rassi, column frame with nut bolt, shuttering plate 1200 sqft with all accy, nails 2 inch, nails3 inch, packing timber, dah mark iii, leather gloves, picks 3 kg with handle, phawda with handle, cutting plier, crow bar, shovel, nylone rope 20 mm, nylone rope 10mm, hdpe sand bag, wire cutter, drill bit set, drillconcrete bit 2 to 10 mm, drill star bit, drill magnetic bit, adapter 8 mm, allen key set, chain saw 16 inch, hydraulic concrete mixer machine, heavy duty rockbreaker machine, steel gurmala, wooden gurmala, aluminium patti, fish line best quality, water level pipe, sprit level, nylon rope 40 mm, rammer with handle, chiesal, mason trowel, hammer 250 gm, hammer 1 kg, hammer 2 kg, ball pin hammer, steel bucket, sandscreen, welding hand screen, plumb bob, aluminiumfoldable ladder, cgi sheet cutter scissors, centre punches, measuring tape 30 mtr, measuring tape 15 mtr, measuring tape 05 mtr, hexa blade, adjustable 300 mm, adjustable 600 mm, spanner set 6 to 23, spanner 21 to 23, spanner 19 to 21, screw driver set, die set 32 mm, juterope, earth compactor motor operator, sprit levelmagnetic, stud, binding wire, swg wire, hand sieve ofsize 20mm to 60 mm, measuring tube 100 ml to 1000 ml, digital electronic weighing machine, hanging weighingmachine upto 500 kg, digital vernier caliper meter, ringwire gauage

State Government

TRN :35935046 | 26 Nov, 2025

Tender Value : 4.86 Lacs

Palwal - Haryana

Tender for dnit for supply and fixing of submersible motor pump, gi column pipes, submersible cable, panel board etc. complete in all respect at village badoli and all other works contingent thereto. a/mtc. water supply scheme ...

State Government

TRN :35941047 | 28 Nov, 2025

Tender Value : 1.00 Crore

Bikaner - Rajasthan

Tender for dismantling of existing structures like culverts, bridges, retaining walls, cc road and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 50 metres as directed by engineer.cement concrete grade m-15 and above and pcc blocks clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to a lead of 50 metres from road boundary including removal and disposal of top organic soil not exceeding 150 mm in thickness as directed by engineer.in area of light jungle silt clearance of drains, channels and canals with lift 1.5 mtr and lead up to 50 mtr. sludge clearance of drains, channels and canals with lift 1.5 mtr and lead up to 50 mtr. "providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level :1:3:6 (1 cement : 3 fine/ coarse sand : 6 graded stone aggregate 20 mm nominal size). " 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto two stories excluding cost of centring, shuttering, finishing and reinforcement : including providing /mixing of synthetic fibers compulsorily complying with is 16481:2022 of 06 mm/12 mm length to be mixed @ 0.25% by weight of cement i.e. 125 gms per 50 kg cement up to 900 gms per cum of concrete/ mortar. "reinforcement for r.c.c. work at all levels including straightening, cutting, bending, placing in position and binding all complete." centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for :foundations, footings, bases of columns, etc. for mass concrete. wrought iron and mild steel welded work) (using angles, square bars, tees and channel grills, grating frames, gates and tree guards of any size and design etc. including cost of screens and welding rods or bolts and nuts complete fixed in position but without the cost of excavation and concrete for fixing which will be paid separately. providing and fixing of reinforced ferro-cement drain covers designed for 'a' class loading duly marked on cover with adequate steel reinforcement having thickness 75mm to 150mm anti corrosive bitumen painted m.s. plate , rim and m.s. lifting hooks, admixtures like plasticizer, bond improving compound, shrinkage, resistance compound, abrasion resistant complete as per approved design etc.standard size 2100x500mm (150mm thick) for span 1201 to 1500mm brick work with fps bricks of class designation 75 in foundation and plinth in:cement mortar 1:4 (1 cement : 4 coarse sand) cement plastering including t&p, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 20 mm cement plaster of mix : 1:4 (1 cement : 4 fine/ coarse sand) providing and laying precast reinforced cement concrete box culvert section of m-40 grade designed for 'aa' class loading as per irc specifications including the effect of impact, eq etc. complete on firm base of 200mm thick lean concrete of m-10 grade with aggregate of size 40mm nominal of following internal sizes. the work includes required safety measures, construction of drain for diversion of flowing water, cost of design of rcc precast box and its proof checking from iit/mnit jaipur etc. complete in all respect as per specifications diversion of flowing water, cost of design of rcc precast box and its proof checking from iit/mnit jaipur etc. complete in all respect as per specifications size 2.00 m x 2.00 m providing, laying, spreading and compacting of granular sub-base by providing close graded material, mixing in a mechanical mix plant at omc, carriage of mixed material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per mort&h specification clause - 401 including all material, labour, machinery, lighting, guarding and maintenance of diversion.grading - i material providing, laying, spreading (with paver finisher only) and compacting wet mix macadam (wmm) base course comprising of graded stone aggregate and granular material conforming to mort&h specifications (table 400-ii) in layers of equal compacted thickness each consolidated, including pre-mixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tippers to site, laying in uniform layers in base course on a well prepared sub-base/ base course and compacting with power vibratory-roller to achieve the desired density complete as per mort&h specification clause - 406 including all material, labour, machinery, lighting, guarding and maintenance of diversion. providing and applying primer coat over prepared surface of granular base with bitumen emulsion as per is : 8887 and approved quality @ 0.6 kg/sqm with the help of spray set fitted on bitumen container (boiler) after cleaning the surface including removing of binding material and other foreign matter with wire brushes and small picks, sweeping with brooms or soft brushes and finally dusting with old gunny bags and compressed air to receive bituminous treatment complete as per clause 502 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. providing and applying tack coat on the prepared surface with bitumen emulsion as per is: 8887 and approved quality @ 0.2 kg/sqm with the help of spray set fitted on bitumen container (boiler) after cleaning the surface with brooms or soft brushes and finally dusting with old gunny bags and compressed air to receive bituminous treatment complete as per clause 502 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. "providing and laying 50-75 mm compacted thick design mix (approved by engineer) dense bituminous macadam on prepared surface with specified graded crushed aggregates as per table 500-9, 500-10 with bitumen binder set (including cost of anti stripping compound minimum 1% in lime/cement as per design wherever required) for base/ binder course including loading of material with f.e. loader, heating and mixing of stone aggregate, filler and bitumen in computerised hot mix plant, transporting the mixed material by tippers to paver and laying with paver finisher fitted with electronic sensor control as per clause 504.3.5 to the required level and grade, compacting by power rollers and vibratory rollers or 150 to 250 kn pneumatic tyred roller with tp = 0.7 mpa to achieve the desired density (approximately 2.3 tonne/cum) complete as per clause 507 of mort&h specification but excluding primer/tack coat, including all material, labour, machinery, lighting, guarding and maintenance of diversion.grade-ii with bitumen vg-grade 30 @ 4.25 %, lime filler @ 2% (percent by weight of total mix)" "providing and laying 30-45 mm compacted thickness bituminous concrete as per design mix (approved by engineer) on prepared surface with specified grade stone aggregate as per table - 500-18 with bitumen for wearing course including loading of aggregate with f.e. loader and hot mixing of stone aggregate and bitumen (including cost of anti stripping compound minimum 1% in lime/cement as per design wherever required) in computerised hot mix plant, transporting the mixed material by tippers to paver and laying with paver finisher fitted with electronic sensing device (as per clause 504-3.5) to the required level and grade and compacting by power rollers and vibratory rollers or 150 to 250 kn pneumatic tyred roller with tp = 0.7 mpa, to achieve the desired density complete as per clause 509 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion but excluding primer/tack coat.grade-ii with bitumen vg-grade 30 @ 6% (percent by weight of total mix)" "earth work in excavation in open area, stp, wtp, pumping station with mechanical means including dressing of sides and ramming of bottoms, including getting out the excavated material, disposal of excavated material lead upto 1000m at suitable site as per as per drawing and as per direction of engineer. (measurements for payment to be done as per standard drawings). above 3.0 m and upto 6.0 m depth" dismantling of existing structures like culverts, bridges, retaining walls, cc road and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 50 metres as directed by engineer. cement concrete grade m-15 and above and pcc blocks clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to a lead of 50 metres from road boundary including removal and disposal of top organic soil not exceeding 150 mm in thickness as directed by engineer.in area of light jungle silt clearance of drains, channels and canals with lift 1.5 mtr and lead up to 50 mtr. sludge clearance of drains, channels and canals with lift 1.5 mtr and lead up to 50 mtr. "providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level : 1:3:6 (1 cement : 3 fine/ coarse sand : 6 graded stone aggregate 20 mm nominal size). " 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) brick work with fps bricks of class designation 75 in foundation and plinth in: cement plastering including t&p, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 20 mm cement plaster of mix : 1:4 (1 cement : 4 fine/ coarse sand) reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto two stories excluding cost of centring, shuttering, finishing and reinforcement : including providing /mixing of synthetic fibers compulsorily complying with is 16481:2022 of 06 mm/12 mm length to be mixed @ 0.25% by weight of cement i.e. 125 gms per 50 kg cement up to 900 gms per cum of concrete/ mortar. "reinforcement for r.c.c. work at all levels including straightening, cutting, bending, placing in position and binding all complete." centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for :foundations, footings, bases of columns, etc. for mass concrete. wrought iron and mild steel welded work) (using angles, square bars, tees and channel grills, grating frames, gates and tree guards of any size and design etc. including cost of screens and welding rods or bolts and nuts complete fixed in position but without the cost of excavation and concrete for fixing which will be paid separately. providing and fixing of reinforced ferro-cement drain covers designed for 'a' class loading duly marked on cover with adequate steel reinforcement having thickness 75mm to 150mm anti corrosive bitumen painted m.s. plate , rim and m.s. lifting hooks, admixtures like plasticizer, bond improving compound, shrinkage, resistance compound, abrasion resistant complete as per approved design etc.standard size 2100x500mm (150mm thick) for span 1201 to 1500mm dismantling of flexible pavements for sewer line and manholes and disposal of dismantled materials up to a lead of 50 metres as directed by engineer including allowances for any additional dismantling beyond the drawings (measurement for payment to be as per standard drawings), re-handling of material/earth to complete the task. bituminous courses granular courses "providing, laying, spreading and compacting of granular sub-base by providing close graded material, mixing in a mechanical mix plant at omc, carriage of mixed material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per mort&h specification clause - 401 including all material, labour, machinery, lighting, guarding and maintenance of diversion. grading - i material" providing, laying, spreading (with paver finisher only) and compacting wet mix macadam (wmm) base course comprising of graded stone aggregate and granular material conforming to mort&h specifications (table 400-ii) in layers of equal compacted thickness each consolidated, including pre-mixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tippers to site, laying in uniform layers in base course on a well prepared sub-base/ base course and compacting with power vibratory-roller to achieve the desired density complete as per mort&h specification clause - 406 including all material, labour, machinery, lighting, guarding and maintenance of diversion. providing and applying tack coat on the prepared surface with bitumen emulsion as per is: 8887 and approved quality @ 0.2 kg/sqm with the help of spray set fitted on bitumen container (boiler) after cleaning the surface with brooms or soft brushes and finally dusting with old gunny bags and compressed air to receive bituminous treatment complete as per clause 502 of mort&h specification including all material, labour, machinery lighting, guarding and maintenance of diversion. providing and laying 50-75 mm compacted thick design mix (approved by engineer) dense bituminous macadam on prepared surface with specified graded crushed aggregates as per table 500-9, 500-10 with bitumen binder set (including cost of anti stripping compound minimum 1% in lime/cement as per design wherever required) for base/ binder course including loading of material with f.e. loader, heating and mixing of stone aggregate, filler and bitumen in computerised hot mix plant, transporting the mixed material by tippers to paver and laying with paver finisher fitted with electronic sensor control as per clause 504.3.5 to the required level and grade, compacting by power rollers and vibratory rollers or 150 to 250 kn pneumatic tyred roller with tp = 0.7 mpa to achieve the desired density (approximately 2.3 tonne/cum) complete as per clause 507 of mort&h specification but excluding primer/tack coat, including all material, labour, machinery, lighting, guarding and maintenance of diversion. grade-ii with bitumen vg-grade 30 @ 4.25 %, lime filler @ 2% (percent by weight of total mix) providing and laying 30-45 mm compacted thickness bituminous concrete as per design mix (approved by engineer) on prepared surface with specified grade stone aggregate as per table - 500-18 with bitumen for wearing course including loading of aggregate with f.e. loader and hot mixing of stone aggregate and bitumen (including cost of anti stripping compound minimum 1% in lime/cement as per design wherever required) in computerised hot mix plant, transporting the mixed material by tippers to paver and laying with paver finisher fitted with electronic sensing device (as per clause 504-3.5) to the required level and grade and compacting by power rollers and vibratory rollers or 150 to 250 kn pneumatic tyred roller with tp = 0.7 mpa, to achieve the desired density complete as per clause 509 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion but excluding primer/tack coat. grade-ii with bitumen vg-grade 30 @ 6% (percent by weight of total mix)

corporations/Associations/Others

TRN :35941730 | 27 Nov, 2025

Tender Value : 23.49 Lacs

Jhunjhunu(N) - Rajasthan

Tender for construction of cc drain and road at luhar basti sitsar ward no 12 - dismantling of existing structures like culverts, bridges, retaining walls, cc road and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 50 metres as directed by engineer cement concrete grade m-15 and above and pcc blocks dressing of earth work in surface excavation including cutting and filling upto 30cm depth including disposal of excavated earth upto 50m and lift upto 1.5 m. earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of engineer for following depths, below natural ground / road top level. in all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc. depth upto 1.5 m "carriage of materials by mechanical transport including loading, unloading and stacking : earth for 5.0 km" providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level : 1:5:10 (1 cement : 5 fine/ coarse sand : 10 graded stone aggregate 40 mm nominal size). providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded 20mm nominal size stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 40mm thick neat cement punning centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for : foundations, footings, bases of columns, etc. for mass concrete. providing, laying and spreading of granular sub-base by providing coarse graded material (table 400-2), spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with vibratory roller to achieve the desired density, complete as per mort&h specification clause - 401 including all material, labour, machinery, lighting, guarding and maintenance of diversion. grading - iii material "construction of embankment with approved material obtained from borrow pit with all lifts and leads, transporting to site, spreading, grading to required slope and compacting by vibratory roller 8-10 tonne to meet requirement of table 300-2 including cost of compensation for earth taken from private land complete as per mort&h specification clause 305. (lead taken upto 5 km)" "providing and laying lean cement concrete 1:4:8 in sub- base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in concrete mixer, laid manualy, compacted with surface vibrator, finishing and curing complete as per clause 601, 112 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion." providing and laying un-reinforced, plain cement concrete mix with concrete mixer & vibrator pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate conforming to is: 383, maximum size of coarse aggregate not exceeding 25 mm, mixed as per approved mix design, laid, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints etc including all material, labour, machinery, lighting, guarding and maintenance of diversion.

corporations/Associations/Others

TRN :35943031 | 27 Nov, 2025

Tender Value : 32.03 Lacs

Jhunjhunu(N) - Rajasthan

Tender for construction of bt road and drain from mandawa road to rakesh pti plot via govt school, ward no 12 -dismantling of existing structures like culverts, bridges, retaining walls, cc road and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 50 metres as directed by engineer cement concrete grade m-15 and above and pcc blocks dismantling of flexible pavements and disposal of dismantled materials up to a lead of 50 metres as directed by engineer. bituminous courses "carriage of materials by mechanical transport including loading, unloading and stacking : earth for 2.0 km" dressing of earth work in surface excavation including cutting and filling upto 30cm depth including disposal of excavated earth upto 50m and lift upto 1.5 m. providing, laying and spreading of granular sub-base by providing coarse graded material (table 400-2), spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with vibratory roller to achieve the desired density, complete as per mort&h specification clause - 401 including all material, labour, machinery, lighting, guarding and maintenance of diversion. grading - ii material "providing, laying, spreading (with paver finisher only) and compacting wet mix macadam (wmm) base course comprising of graded stone aggregate and granular material conforming to mort&h specifications (table 400-ii) in layers of equal compacted thickness each consolidated, including pre-mixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tippers to site, laying in uniform layers in base course on a well prepared sub-base/ base course and compacting with power vibratory-roller to achieve the desired density complete as per mort&h specification clause - 406 including all material, labour, machinery, lighting, guarding and maintenance of diversion." providing and applying primer coat over prepared surface of granular base with bitumen emulsion as per is : 8887 and approved quality @ 0.6 kg/sqm with the help of spray set fitted on bitumen container (boiler) after cleaning the surface including removing of binding material and other foreign matter with wire brushes and small picks, sweeping with brooms or soft brushes and finally dusting with old gunny bags and compressed air to receive bituminous treatment complete as per clause 502 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. "providing and applying tack coat on the prepared surface with bitumen emulsion as per is: 8887 and approved quality @ 0.2 kg/sqm with the help of spray set fitted on bitumen container (boiler) after cleaning the surface with brooms or soft brushes and finally dusting with old gunny bags and compressed air to receive bituminous treatment complete as per clause 502 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion." providing and laying open graded premix carpet 20mm thick (compacted), on prepared surface in a single course as wearing course, composed of specified graded crushed stone aggregate as per table 500-23, premixed with bituminous binder @ 14.60 kg/ 10sqm (including cost of anti-stripping compound wherever required), including loading of material with f.e. loader, hot mixing of stone aggregate and bitumen in computerised hot mix plant, transporting the mixed material by tippers to paver and laying with paver finisher fitted with electronic sensor control to the required level and grade, compacting smooth wheeled roller 8-10 tonne capacity and finishing to required level to achieve the desired density as per clause 511 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion but excluding cost of tack coat/ seal coat. with bitumen vg-grade 30 providing and applying liquid seal coat type "a" comprising of a layer of bituminous binder @ 9.8 kg/ 10 sqm (including cost of anti stripping compound minimum 1% in lime/cement as per design wherever required) followed by a cover of stone chipping @ 0.09 cum/10 sqm of specified grading and rolling with power roller 8-10 tonne complete as per clause 513 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. with bitumen vg-grade 30 providing and laying marking of center line and stop line etc with hot thermoplastic compound 2.5 mm thick on road/ plain surface, including reflectorising glass beads @ 250 gms per sqm area with special applicator machine, as per irc:35 including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control involved. the finished surface to be level, uniform and free from streaks and holes as per clause 803 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of engineer for following depths, below natural ground / road top level. in all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc. depth upto 1.5 m "carriage of materials by mechanical transport including loading, unloading and stacking : earth for 5.0 km" providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level : 1:5:10 (1 cement : 5 fine/ coarse sand : 10 graded stone aggregate 40 mm nominal size). providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded 20mm nominal size stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 40mm thick neat cement punning centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for : foundations, footings, bases of columns, etc. for mass concrete. steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Corporations And Associations And Others

TRN :35912599 | 29 Nov, 2025

Tender Value : 24.17 Lacs

Anakapalle - Andhra Pradesh

Tender for improvement works existing skating rink including construction of damaged compound wall, erection of fibre shed on the existing columns for community purpose

State Government

TRN :35895301 | 01 Dec, 2025

Tender Value : 32.67 Lacs

Thiruvananthapuram - Kerala

Tender for dismantling brick and rcc works, excavation for column footings, shuttering and steel work for rcc, pcc and rcc works, solid block work, plastering and painting works.aluminium fabrication works, sanitary fittings and plumbing works. eletrifications works. new oxygen plant operators room construction works

Central Government/Public Sector

TRN :35885798 | 28 Nov, 2025

Tender Value : 0

Coimbatore - Tamil Nadu

Tender for repairs to plinth protection, columns, walls, fascia and beams, slab and other connected works to md otm accn and upkeep/ maintenance of electrical supply installation, substation and connected works

Central Government/Public Sector

TRN :35888609 | 03 Dec, 2025

Tender Value : 31.77 Lacs

Dhanbad - Jharkhand

Tender for illumination of column beam window with narrow beam lights neon lights allied cabling and other electrical work at nlhc and illumination of gates of new academic complex building with neon lights and narrow beam lights at iit ism dhanbad

Central Government/Public Sector

TRN :35880222 | 27 Nov, 2025

Tender Value : 35.00 Lacs

Secunderabad - Telangana

Tender for repairs to borewell, column pipe, submersible motor, starters earthing and connecting works at certain units and repairs to borewell, open well related repairs and repairs to pumps/ motors and water distribution and allied works under age em ii of ge

Related Searched Keywords : column work

List of column-work Tenders

Tender for dnit for supply and fixing of submersible motor pump, gi column pipes, submersible cable, panel board etc. complete in all respect at village badoli and all other works contingent thereto. a/mtc. water supply scheme ...

Tender for improvement works existing skating rink including construction of damaged compound wall, erection of fibre shed on the existing columns for community purpose

Tender for repairs to plinth protection, columns, walls, fascia and beams, slab and other connected works to md otm accn and upkeep/ maintenance of electrical supply installation, substation and connected works

Tender for illumination of column beam window with narrow beam lights neon lights allied cabling and other electrical work at nlhc and illumination of gates of new academic complex building with neon lights and narrow beam lights at iit ism dhanbad

Tender for repairs to borewell, column pipe, submersible motor, starters earthing and connecting works at certain units and repairs to borewell, open well related repairs and repairs to pumps/ motors and water distribution and allied works under age em ii of ge

Get column work Tender Alert...

Related Searched Keywords : column work

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us