Filters

List of cam-roller Tenders

List of latest cam-roller Tenders in Indian Tenders. Click on any cam-roller Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for cam-roller Tenders.

All-Tenders (69)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :49020829 | 15 May, 2025

Tender Value : 39.20 Lacs

Sitapur - Uttar Pradesh

Tender for tender for re construction of gangupur to ganeshpur mdhya bhag first - providing laying and spreding and compacting stoneaggrigate of 53-22.4mmsize to water bound macadam specification includingspreading in uniform thikness hand packing rooling with smooth wheel roller 80-100kn in stages to proper grade and cambermaterial manually mixing in place with rotavater and compacti applying and brooming stone screening to fill up the entrstices of coarse aggrigate watering and compacting to the required density 2 providing and applying primer coat with bitumen emulsion (ss) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70kg/sqm usingmannual means . 3 providing and applying tack coat with vg_10 using bitumen distributor at the rate of 0.25 kg per sqm on the preparedsurface cleaned with hydraulic broom . 4 providinglaying & rolling of open graded premix carpet of 20 mm thickness composed of 13.2mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line ,grade and level to serve as wearing course on a previously prepared base including mixing in a suitable plant,laying and rolling with a three wheel 80-100 kn static roller capacity finished to required level and grades to be followed by seal coat . 5 providing and laying seal coat c type sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall . 6 construction of embankment with approved material obtained from available land as permitted and approved byengineer-in-charge and as per technical specitaion clause 301.3.4.1,with all liftsand leads,spreading, grading to required slope and compacting to meet requirement of tables 300.1and 300.2 as per technical specification clause 301.5 7 brick edging on both sides of the road with first class bricks 8 cm wide & 12 cm deep laid with mudmortar including labour & supply of bricks finished to required template and in proper alingment and also including dressing & ramming the excavated earth as directed by the engineer - in -charge. 8 routine maintenance charge up to 5 year for any diffect/damaged found after constrution for all works including restoration of paved surface, soulders culverts, road furniture etc complete as per dirction of e/i .

Government Departments

TRN :49020962 | 21 May, 2025

Tender Value : 10.31 Lacs

Agra - Uttar Pradesh

Tender for tender for hariparvat zone, room no. 28, jageshwar nagar, from saurabh house to hubbalal temple, drain repair and road improvement work by interlocking tiles and cc on the side track. - demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of engineer- in-charge. 2 earth work in excavation by mechanical means (hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by engineer-in-charge: all kinds of soil. 3 by machenical transport including loading, unloading and stacking of earth (upto 10 km) 4 brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in: cement mortar 1:4 (1 cement: 4 coarse sand) 5 cement plaster in coarse sand : 12mm cement plaster of mix : 1:4 (1 cement : 4 coarse sand) 6 1:5:10 (1 cement: 5 coarse sand (zone-iii) derived from natural sources: 10 graded stone aggregate 40 mm nominal size derived from natural sources) 7 providing and laying design mix cement concrete of m-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy m.s. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of engineerin-charge (item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately). cement concrete manufactured in automatic batching plant (rmc plant) including transportation to site in transit mixer 8 extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density (proctor density). 53 mm to 22.4 mm size stone aggregate 9 supplying and stacking at site. red bajri 10 laying, spreading and compacting stone aggregate of specified sizes to wbm specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density. 11 providing and laying factory made chamfered edge cement concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using pu mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of engineer-in-charge. 80 mm thick c.c. paver block of m-35 grade with approved colour design and pattern 12 1:2:4 (1 cement : 2 coarse sand (zone-lll) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 13 raising & re-fixing of manhole including all material labor t&p etc. all complete. 14 supply & fixing of r.c.c. manhole frame and cover including all complete. 15 r.c.c. precast slab 900mm x 450mm having thickness (150mm with 10mm dia) reinforcement double cage and having two lifting handles. 16 supply and fixing of r.c.c. slab as per direction of engineer-in-charge etc. all complete. 17 supply and fixing of black granite stone board and approved standard matter with brick work, plaster & paint etc. all complete. 18 sub total (a) 19 add / deduction for estimate figure amount match

Local Bodies

TRN :49021459 | 16 May, 2025

Tender Value : 6.20 Lacs

Hathras - Uttar Pradesh

Tender for tender for cc work from hanuman mandir to cc road in gram panchayat afo. - clearing & grubbing road land including uprooting wild vegetation grass bushes shrubs sapling and trees of girth up to 300 mm 2 construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300.1 and 300.2 with a lead upto 1000 m as per technical specification clause 301.5(widening of patari) 3 construction of granular sub-base by providing well graded material, spreading in uniform layers with tractor mountedgrader on prepared surface mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401. 4 providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smoothwheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405. 5 construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per clause 1501.2.2 m30 (grade), coarse and fine aggregates conforming to is:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, 6 supply and fixing of information board

Local Bodies

TRN :49021495 | 16 May, 2025

Tender Value : 7.61 Lacs

Hathras - Uttar Pradesh

Tender for tender for cc connectivity work from main link road to brahmadev sthal in village tikari kala - cleaning and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings of girth up to 300mm, removal of stumps of suchtrees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per technical specification clause 201 2 construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300.1 and 300.2 with a lead upto 1000 m as per technical specification clause 301.5 3 construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavatorat omc, and compacting with smoothwheelroller to achieve thedesired density, complete as per technical specification clause 401. 4 providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smoothwheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405. 5 cement concrete pavement (c.c. road slab m 30 (grade) (1:1.5:3) coarse and fine aggregate construction of un-reinforced plain cement concrete pavement thickness as per design, over a prepared sub base, laying and fixing of 125 micron thick polythene film, including provision of contraction and expansion construction joints, applying curing of concrete slabs for 14 days, finishing to lines and grade as per drawing and technical specification 6 supply and fixing of inaugration stone i/c its painting and lettering etc complete as per direction of e/i.

Local Bodies

TRN :49021556 | 16 May, 2025

Tender Value : 21.17 Lacs

Hathras - Uttar Pradesh

Tender for tender for cc work from nagla khushali marg to lakhanu pura marg ambedkar park in village panchayat lakhanu - clearing & grubbing road land including uprooting wild vegetation grass bushes shrubs sapling and trees of girth up to 300 mm 2 construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300.1 and 300.2 with a lead upto 1000 m as per technical specification clause 301.5(widening of patari) 3 excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5m and lead upto 50m as per technical specification clause 302.3 4 providing concrete for plain concrete in open foundation complete as per drawings and technical specification clause 802,803,1202 &1203 5 plane/reinforced cement concrete in substructure complete as per drawings and technical specification clauses 802,804,805,806,807, 1202&1204 6 supply, fitting and placing with ms bar rainforcement as per drawings and technical cpecification clause 1002, 1010 and 1202 7 construction of granular sub-base by providing well graded material, spreading in uniform layers with tractor mountedgrader on prepared surface mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401. 8 providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smoothwheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405. 9 construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per clause 1501.2.2 m30 (grade), coarse and fine aggregates conforming to is:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, 10 supply and fixing of information board

Local Bodies

TRN :49021584 | 16 May, 2025

Tender Value : 8.00 Lacs

Hathras - Uttar Pradesh

Tender for tender for cc work from aligarh road to nihal singhs house in village panchayat bijhari - clearing & grubbing road land including uprooting wild vegetation grass bushes shrubs sapling and trees of girth up to 300 mm 2 construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300.1 and 300.2 with a lead upto 1000 m as per technical specification clause 301.5(widening of patari) 3 excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5m and lead upto 50m as per technical specification clause 302.3 4 providing concrete for plain concrete in open foundation complete as per drawings and technical specification clause 802,803,1202 &1203 5 brick masonry work in cement mortar in foundation complete excluding pointing and plastering as per drawing and technical spefication clauses 600,1202 & 1203 (brick masonry in 1:4 cement mortar) 6 plastering with cement mortar (1:4) 12mm thick on brickwork in substructure as per technical specification clauses 613.4& 1204 7 construction of granular sub-base by providing well graded material, spreading in uniform layers with tractor mountedgrader on prepared surface mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401. 8 providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smoothwheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405. 9 construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per clause 1501.2.2 m30 (grade), coarse and fine aggregates conforming to is:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, 10 providing and laying of interlocking concrete block provements having thickness 80mm as per drawing and technical specification clause 1504 11 supply and fixing of information board

Local Bodies

TRN :49021643 | 16 May, 2025

Tender Value : 11.19 Lacs

Hathras - Uttar Pradesh

Tender for tender for c.c. connecting road from main link road to baghel temple in village jaraira - construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavatorat omc, and compacting with smoothwheelroller to achieve thedesired density, complete as per technical specification clause 401. 2 providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smoothwheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405. 3 cement concrete pavement (c.c. road slab m 30 (grade) (1:1.5:3) coarse and fine aggregate construction of un-reinforced plain cement concrete pavement thickness as per design, over a prepared sub base, laying and fixing of 125 micron thick polythene film, including provision of contraction and expansion construction joints, applying curing of concrete slabs for 14 days, finishing to lines and grade as per drawing and technical specification 4 earthwork in excavation for structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of side. 5 providing concrete for plain concrete (m10) in (1:3:6 :: c:c/s:s/g)open foundations complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 6 rcc work with cement approved coarse sand and 2cm(3/4) gauge approved stone grit in the proportion 1:2:4 c:c/s:s/g excluding supply of reinforcement and its bending and including its fixing and binding the same with 24bwgi binding wire and including necessary centering and shuttering etc. and also including supply of all material labour and tools and plants etc. required to proper completion of the work/strength of the concrete shall not be less than m-15 as per drawings and technical specifications clause 802, 803, 1202 & 1203 7 mild steel or iron work in plain work as reinforced concrete i/c bending for proper completion of the work and including the supply of steel and its wastage bend, hooks and athourized over iapping shal be measured upto floor to level 8 supply and fixing of inaugration stone i/c its painting and lettering etc complete as per direction of e/i.

Government Departments

TRN :49022269 | 21 May, 2025

Tender Value : 8.46 Lacs

Agra - Uttar Pradesh

Tender for tender for zone-1, chhatta ward no. 27, bagh muzaffar khan, from saint john square to near garg homeo hall, hotmix road improvement work. - dismantling of flexible pavement (bituminous courses) by mechanical means and disposal of dismantled material up to a lead of 1 kilometre, as per direction of engineer-in-charge. 2 supplying and stacking at site 53 mm to 22.4 mm size stone aggregate 3 supplying and stacking at site stone dust 4 preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres. 5 surface dressing one coat on old surface with bitumen of specified grade at the rate of 1.22 kg/ sqm of surface area with 1.10 cum of stone chippings 11.2 mm nominal size per 100 sqm of road surface, including consolidation with road roller of 6 to 8 tonne capacity etc. complete: using bitumen emulsion (minimum 50% bitumen content- rs grade conforming to is : 8887) 6 providing and applying tack coat using bitumen emulsion conforming to is:8887, using emulsion pressure distributer including preparing the surface & cleaning with mechanicalbroomon bituminous surface @ 0.25kg/sqm 7 providing and laying dense graded bituminous macadam using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specificatons and directions of engineer-in-charge.50 to 100 mm average compacted thickness with bitumen of grade vg-30 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of aggregate) prepared in batch type hot mix plant of 100-120 tph capacity 8 providing and laying bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of engineer-in-charge. 40/50 mm compacted thickness with bitumen of grade vg-30 @ 5.5% (percentage by weight of total mix) and lime filler @ 3% (percentage by weight of aggregate) prepared in batch type hot mix plant of 100-120 tph capacity 9 providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatichermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, t&p, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of engineer-in-charge and accordance with applicable specifications. 10 reflective raised pavement markers (cat eye/ road stud) supply and flxing of raised pavement marker with made of plastic body of rpimi road stud shall be moulded from asa (acrylic styrene acrylonitrile) or hips (high-lmoact polystyrene) or acryloniilrile butadien styrene (abs) or any oiher suitable malerial approved by the engineer. the marker shall support aload of 13,635 kg tested in ccordance with astm d4280.the reflective panels shall consist of number of lenses containing single or dual prismatic cubes capable of providing total internaleflection of the lighl entring the lens face. lenses shall be mouled of methyl melhecrylate conforming io astm d78b of equivalent the slop or retro-reflecting surface shall preferably be 35+1-5 degree to base and the area of each relro _reflecling sllrface shall not be less than 13.00 sq.cm the marker height shall not be less lhan 10 mm and shall nol exceed 20 mm & width shall not exceed 130 mm. the base of the marker shall be flal within 1.3 mm all road studs shall be legibly marked wilh the name , lrade or other means of identification of the manufacture. epoxynslallations, excess adhesive around the edge of the malker, excess adheslve on the pavemenl and adhesive on the exposed surfaces of the markers shall be immedialely removed. the contractor shall submit a two year warranty for sal sfactory lleldeformance including stipulated retro-refleclance of the reflecting panel , to the engineer . ln addition a two year warranty foralisfactory infield perfonnance of the finished road marker shall also be given by lhe conlractor who carries out the work of fixing of reflective road ma*ers. ln case the markers are displaced , damaged . gel worn out or lose theireflectivity compared lo stipulated standards , the contractor would be reqlllred to replace allsuch markers within 15 days ofthe inlimation from the engineer. at his own cost the rate shall include all materlals, labour, t&p,ransportalion, insiallation and incidentals all complete as per direction of the engineer-in-charge 11 supply & fixing granite stone work display board (size 2.50ft x 4.00ft) including painting, lettering etc. all complete. (none schedule) 12 sub total 13 add/deduction rs. for estimate figure amount match 14 grand total

corporations/Associations/Others

TRN :49023353 | 19 May, 2025

Tender Value : 7.53 Lacs

Fatehpur - Uttar Pradesh

Tender for tender for work no-13 ward no-01 ajgava to renewal of route by pc to banda sagar bahraich marg to udhannapur sampark marg. - providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with threewheel 80-100 kn static roller in stages to proper grade and camber,applying and brooming,crushable screening to fill up the interstices of coarse aggregate watering and compacting to required density gr 3 as per t.s clause 405 2 providing and applying primer coat with bitumen emulsion (ss-2) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/sqm using manual means. clause 502 3 providing and applying tack coat with0.30 kg /sqm with bitumen vg-10 grade surface clean by machanical broom all complete work. 4 providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates using bitumenvg10 to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat type c as per technical specification clause 508. 5 providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type c as per technical specification clause 510 6 construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 technical specification clause 303.1. in patri 7 brick edging on both sides of the road of first brick class m--150 8 cm wide and 12 cm deep laid withmud mortar including labour & supply of brick finished to required template and in proper alignment and also including dressing & ramming the excavated earth as directed by the engineer in charge of the work including material, labour and t&p etc proper completion of the work

corporations/Associations/Others

TRN :49023358 | 19 May, 2025

Tender Value : 18.26 Lacs

Fatehpur - Uttar Pradesh

Tender for tender for work no-02 ward no.-01 ajgawa from gt road to saraihar (monu yadav) with general repair and renewal work. - providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with threewheel 80-100 kn static roller in stages to proper grade and camber,applying and brooming,crushable screening to fill up the interstices of coarse aggregate watering and compacting to required density gr 3 as per t.s clause 405 2 providing and applying primer coat with bitumen emulsion (ss-2) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/sqm using manual means. clause 502 3 providing and applying tack coat with0.30 kg /sqm with bitumen vg-10 grade surface clean by machanical broom all complete work. 4 providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates using bitumenvg10 to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat type c as per technical specification clause 508. 5 providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type c as per technical specification clause 510 6 earth work in emabnkment in ordinary soilincludingsupply of earth, labour and t&p also including cartage 5km up to site. 7 brick edging on both sides of the road of first brick class m--150 8 cm wide and 12 cm deep laid withmud mortar including labour & supply of brick finished to required template and in proper alignment and also including dressing & ramming the excavated earth as directed by the engineer in charge of the work including material, labour and t&p etc proper completion of the work

Related Searched Keywords : cam roller

List of cam-roller Tenders

Get cam roller Tender Alert...

Related Searched Keywords : cam roller

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us