Filters

List of cable-compound Tenders

List of latest cable-compound Tenders in Indian Tenders. Click on any cable-compound Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for cable-compound Tenders.

All-Tenders (33)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

corporations/Associations/Others

TRN :35826573 | 14 Nov, 2025

Tender Value : 9.90 Lacs

Kapurthala - Punjab

Tender for estimate for road marking with thermoplastic compound in sadar bazar jallowkhana to bhagat singh chowk, satnarayan bazar to bhagat singh chowk, red cross market shiv mandir chowk to bhagat singh chowk, old sabzi mandi bhagat singh chowk to city cable

State Government

TRN :35808867 | 13 Nov, 2025

Tender Value : 0

Mumbai - Maharashtra

Tender for providing and construct work for electrical cable line and distribution chamber for cable and divert drainage pipe line and chamber to dental building to main electric dp in st. georges hospital compound, mumbai.

Central Government And Public Sector

TRN :35813181 | 10 Nov, 2025

Tender Value : 0

Guwahati - Assam

Tender for supply of single core 120 sq. mm 11kv earth armoured ht power cable stranded comp- circu lar aluminium conductor screen with extended semi conducting compound xlpe insulated and insulation sc reening with extruded semi conducting compound in combination with copper tape cores laid up innershea thed of pvc sheathed cable,al flat strip armoured conformingto is 7098 (part-ii) 1985 with up to date amen dments. make : havells, finolex, kei, polycab.

Central Government/Public Sector

TRN :35814625 | 17 Nov, 2025

Tender Value : 0

Kamrup - Assam

Tender for gem bids for boq1, stp, stp allied works, reactor radius in zink aluminumbio reactors, sweage sump, treated water sump, hydroheal tank, clean water storage tank, blowerand pumpsshed, control room, filter unit 100 or 50 micron, hydroheal, overhead grit chamber, sludgecollectiontrolley, pumps, foot mounted kirloskar make sweage feedpump with standby, foot mounted filter pump kilsokarmake 1 srunning and one standby for filter unit, footmounted kirloskar, blowers, twin lob roots blower oraeration blower including 18 motor 6m bar, filtration unit, ss 316 or 304 mess duplex filter with cleaning 20 systemand stndby, hydro heal complete unit for disinfection withoxygen concentrator 10 lph, diffusres silicon based, upvc and ss or gi piping and accessories, valves, motorized, electrical work mcc panel and rv mcc paneland vfd and cabling and cable tray laying, plc panels anddp transmitters and do sensor and level sensor and cablingand cable tray laying plc, radar sensors and ultrasoniclevel transmitters and exhaust fan on reactor androtameter air, part i concrete and plastering work andwater proofing, part ii reinforcement, part iii centeringshuttering and formwork, pcc solid block, woodenscanntling various size, steel prop of size 2 mtr long and 80mm dia and adjustable up to 4 mtr height and as directed, water proofing compound conform to is 2645 or 20203make pidilite or dr fixit or fevicol, pvc and swr pipe 110mm dia pipe, puf insulated 55 mm thick water tank 5000ltrs, m and l precast cementconcrete, gi pipe 25 mm, flot valve 25 mm dia, gate valve 25 mm, bend 25 mm, tee 25 mm dia, socket 25 mm dia, three phase 1 point 2hp monoblock pump 430 volt complete /bid number: gem/2025/b/6859122* /dated: 05-11-2025 & & / bid document1 / 45

Central Government/Public Sector

TRN :35803029 | 13 Nov, 2025

Tender Value : 0

Pathankot - Punjab

Tender for gem bids for boqboq, wire copper soft for general purposses, volt meter ac mi, sealing compound for repair od distribut, rear doorprimary moul rh, rear door primary moul lh, cable elect, cable electric atc elastomer insulated, cloth canvas cotton540 gm og 91 cm, electrodes welding steel armour 5 mm, steel bar carbon hot rolled round 50mm, lt wire, ht wirecable, isopropyl alcohol, solder soft grade d, copperwasher 14mm, copper washr 17mm, copper washer22mm, insulation tape electrical cotton self a

corporations/Associations/Others

TRN :35785734 | 24 Nov, 2025

Tender Value : 2.74 Crore

Vadodara - Gujarat

Tender for construction of cr building first floor, foundation, cable trench, compound wall, rcc road and ancillary civil works at 66kv parvat ss, tal. and dist surat under navsari circle

Central Government/Public Sector

TRN :35773840 | 11 Nov, 2025

Tender Value : 0

Jhansi - Uttar Pradesh

Tender for gem bids for lv1 r72 4720015070 hose 40y25 7 bor dia 25mm walthk 4 5mm , lv1 r72 346 00 sb oil primingpump mzn 2 w ele motor mn1 2s , lv1 r72 cqa hv 5 45 001 seal spring set comprisg of 2 items , lv1 r72 gyu2 817 022sb houe meter 228 chp ii 0 , lv1 r72 175 34 033 gasket , lv1 r72 cqa hv 5 51 001 seal spg set consist 2 items 175 51 01 , lv7 stln 6220 72 0196593 indicator bulb 21 w , lv7 stln 6220 004180 f 2350300 bulb 24v 5w su 8 5 cap , lv7 stln 6240 013698 lamp fluorescent bulb side lamp tail , lv7 stln 2540 72 0000720 f 7610960 handle door , lv7 stln 8105 001038 x 4700600 bag tools and spare parts tool kit bag , lv7 stln x3000650 mud flap , lv7 stln 2540 009005 b 5518305 blade wind shield wiper , lv7 stln 5945 007625 flasher solid state , lv7 stln 5920 72 0466084 fuse 30 amp , lv7 stln 8030 001186 sealing compound anabond 673 , lv7 stln 6240 008606 f 2330300 lamp incandescent , lv7 stln 6240 013631 lamp incandescent , lv7 stln 6220 004502 light indicator , lv7 stln 6240 013624 lamp incandescent , lv7 stln 6220 004485 light blackout , lv7 stln 6240 72 0468909 tail light glass , lv7 stln p 1602051 master cyl kit , lv7 stln f 0530150 rubber bush , lv7 stln 2940 003886 b 7094101 s a of fuel pipe feed pump to filter , lv7 stln 2540 72 0000719 handle door , lv7 stln f 7875600 front direction indicator , lv7 stln p 3706745 terminal , lv7 stln 5310 009070 washer for banjo bolt on engine washer , lv7 stln f 1939460 pvc hose 1 meter long , lv7 stln p 3706845 terminal , lv7 stln p1605751 kit slave cylinder , lv7 stln x3016850 mud flap , lv7 stln 2540 72 0200999 wiper blades , lv7 stln 4730 72 0001931 f 0831610 clamp hose , lv7 stln 2520 72 0473321 speedometer cable , lv7 stln x 2703400 shaft seal , lv7 stln f 1939650 flexible hose assy , lv7 stln x 1904250 hose radiator outlet to water pump , lv7 stln x 0802110 clip , lv7 stln p 3701449 washer , lv7 stln f 1936750 x1903950 hose rubber 4 id 65mm long , lv7 stln f7x00400 fuse 15 amp , lv7 stln 5920 72 0466088 fuse 30 amp , lv7 stln f 1945450 hose 1 id 80 long , lv7 stln f 0836610 jubilee clip , lv7 stln 2540 009151 mirror assy rear view , lv7 stln x 2703600 shaft seal , lv7 stln f7x00200 fuse 10 amp , lv7 stln x 4801460 knob shift lever , lv7 stln 6240 72 0098502 bulb holder warning lamp , lv7 stln 4930 002613 oil can , lv7 stln b 3717103f arenes control complete , lv7 stln 6240 72 0468907 parking light bulb 5w , lv7 stln f 3921800 slave cyl clutch , lv7 stln 4730 078800 strainer sediment

Central Government/Public Sector

TRN :35774667 | 12 Nov, 2025

Tender Value : 0

Purnia - Bihar

Tender for gem bids for air pressure gauge-c303582, circuit breaker, valvebutterfly 2, window regulator, fuel gauge fueltank, wiper swf 107799, wiper arm swf 108815, temperature guage, fuel gauge, leveling valve, plvalve, cable, lock set, gauge compound vacuumdial indicating make h guru 100mm range-1to24kg/cm2, gauge pressure dial indicating make hguru 100mm range-0to 25 kg/cm2, rear bracket19024646, hose, coupling female 63 fm

Central Government/Public Sector

TRN :35779969 | 24 Nov, 2025

Tender Value : 0

Bardhaman - West Bengal

Tender for gem bids for chanda, fan with washer and nut, trigger pin and nut, plannet carrier with spacer 5 and 6, plug comp assymale plug and female sock, socket housing, drillchuck, ring gear, sun pinion, trigger adjustingnut, socket insulator housing, rotor shaft fittedwith rotor, main body, fan cover with bolt andspring washer, telescopic switch, male plug, planet pinion fitted with needle bearing, stator, overload, short circuit and motor protect, potential transformer 11 kv 110 v 3 ph, pushbutton 550v 10a flp dgms bis crtfd, compoundwear-abrsn rstnc resin-hrdnr, shunt trip assemblywith coil, moving contact for isolator 03 sets for, brass cable gland complete with c.i clam, singlephasing preventor with module, arrester 3.3 kvlghtng, arrester

State Government

TRN :35763340 | 10 Nov, 2025

Tender Value : 17.65 Lacs

Dausa - Rajasthan

Tender for major repair work under state budget head at govt. sss bilona kalan -demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster (ceiling): 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand) internal plaster : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :12mm thick. plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. panting on doors & windows :- painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of 240/415 v ac mcb with positive isolation of breaking capacity not less than 10 ka (b/ c tripping characteristic as per type of load and site requirement) 4kv impulse withstand voltage, as per pwd specification for electrical works with isi marked is 8828(1996) / conforming to iec 60898-1 2002, iec 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per iec, minimum phase termination capacity of 35sq.mm. , conductorline load reversibility, label holding facility , ip 20 contact protection and fitted with existing distribution board/sheets, min. operation 20,000 upto 32 a rating and 10,000 upto 63 a, 5000 for 80 a rating including making connections, testing etc. as required. . oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .6a to 32a rating. 50 a to 63a rating providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed un-arrmoured aluminium cable confirming to is:1554 p-i / is :7098 p - i of 1.1 kv with h4- grade electrolytic aluminium conductor confirming to is 8130 of purity >99.6 %, inner / outer sheath confirming to is:5831 in existing rcc / hume / stoneware / pvc pipe/ open duct/cable trench / cable tray (with cable tie) including testing etc. as required of following size. oem must have it's own in house nabl accrediated laboratory for testing procedure as per is:10810. for additional technical parameters of product / work refer annexure 'a' attached with this bsr 6.0 sq. mm 4 core providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating p & f isi marked (is:3854) 6 amp. flush type non modular switch with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material including cutting hole in tile and making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of of 3/5 pin 6 amp. flush type non modular socket made out from industrial grade polycarbonate or fire resistant abs material, brass terminal with porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .

Related Searched Keywords : cable compound

List of cable-compound Tenders

Tender for estimate for road marking with thermoplastic compound in sadar bazar jallowkhana to bhagat singh chowk, satnarayan bazar to bhagat singh chowk, red cross market shiv mandir chowk to bhagat singh chowk, old sabzi mandi bhagat singh chowk to city cable

Tender for providing and construct work for electrical cable line and distribution chamber for cable and divert drainage pipe line and chamber to dental building to main electric dp in st. georges hospital compound, mumbai.

Tender for construction of cr building first floor, foundation, cable trench, compound wall, rcc road and ancillary civil works at 66kv parvat ss, tal. and dist surat under navsari circle

Get cable compound Tender Alert...

Related Searched Keywords : cable compound

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us