Filters

List of buttons Tenders

List of latest buttons Tenders in Indian Tenders. Click on any buttons Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for buttons Tenders.

All-Tenders (15)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :49019288 | 01 Jan, 0001

Tender Value : 7.96 Lacs

Amreli - Gujarat

Tender for providing and erecting highmast, led streetlight/ floodlight, pole, pole box, pole bracket, dismantling old led streetlight, mcbs, push buttons, etc. and other electrical works at thebi irrigation scheme. (dist. : amreli)

State Government

TRN :49020312 | 12 May, 2025

Tender Value : 0

Delhi - Delhi

Tender for replacement of 02 nos lrs installed in cwph hpi=- 1 motorized liquid rotor starter, floor mounting free standing, dust vermin proof construction tank in 3 mm crca sheet fabricated with m.s. fixed moving electrodes system having horizontal/radial movement, motorized mechanism box, with manual start provision, cable box & control panel for rotor control with all necessary interlock facility with stator (tp air break contactor), rotor panel comprises of indicating lamp - 03 nos. (resistance in, resistance out, stator on) push buttons-03 nos., auxiliary contactor, selector switch for auto/manual, these will have interlock arrangement with stator so that motor may not start in any case unless resistance is fully in position. suitable for 500-750hp make - any djb approved 2 cable for lrs atomization 1.5 sq. mm 5 core copper control cable 3 dismantling of existing old starter, removing cable with suitable means and shifting of the same 4 laying of control cable on wall/surface/under trench as required at site for auto controlling of lrs 5 installation, testing & commissioning of new lrs with all electrical & mechanical connection with necessary civil work as per site requirement including loading, unloading heavy labor charges. filling of water in lrs with chemical solutions for proper resistance. this includes making of foundation/base frame to install lrs as per requirement including cable connection.

State Government

TRN :49020391 | 20 Jun, 2025

Tender Value : 0

Panaji - Goa

Tender for tender for expression of interest tender for national games sports equipment on rental basis-aquatics sports equipment 2 osb 9 starting platform equipped with false start detection system and early start detecting device with no springing effect having a non slip surface of 0.5 x 0.5 meter backstroke hand grip at 0.6 above water level with complete mounting material ready to use confirming to fina , sfi regulations of make anti / mryta 3 floating goal post as per fina specification of make malmsten / anti 4 anti-wave lanes 50 mts long of make anti / mryt 5 backstroke ledge for start of make finis 6 ball cage for 10 balls of make indian 7 ball releasing mechanism of make indian 8 athletics sports equipment 9 assorted rake (with 1.50m handle) (60cm x 20cm) of make nelco 10 cross bar stands (high jump) to hold 6 cross bars of make nelco 11 cross bar stands (pole vault) to hold 6 cross bars of make nelco 12 cutting player of make indigeneous 13 discus 1 kg steel or brass rim for competition (wa approved) minimum 3 brands of make nelco 14 discus 2 kg steel or brass rim for competition (wa approved) minimum 3 brands of make nelco 15 discus stand (20 discus in one stand) of make nelco 16 folding stool (umpires & lap scorers) of make standard 17 hammer 4.00 kg dia turned brass / iron / alloy for competition (wa approved) minimum 3 brands of make nelco 18 hammer 500 gm ms (for fixing nails) of make standard 19 hammer 7.260 kg dia turned brass/ iron/ alloy for competition (wa approved) minimum 3 brands of make nelco 20 hammer cage with door & net (as per wa rule) of make nelco 21 hammer extra wire and handle - men (wa approved) of make nelco 22 hammer extra wire and handle - women (wa approved) of make nelco 23 hammer stand (12 hammers in one stand) of make nelco 24 high jump fiber cross bar (4m) (wa approved) of make nelco 25 high jump height measuring rod - 0.00m to 2.50mof make nelco 26 high jump landing mattress with cover 6m x 4m x 0.70m of make nelco 27 high jump uprights aluminium telescopic of make nelco 28 hurdles - steeple chase including water jump 1 set (wa approved) of make nelco 29 hurdles automatic aluminium - competition (wa approved)of make ate 30 hurdles carrying trolly (20 hurdles in 1 trolly) of make standard 31 javelin 600 gm. 40m range for competition (wa approved) minimum 2 brandsof make nelco/ate 32 javelin 600 gm. 50m range for competition (wa approved) minimum 2 brandsof make nelco/ate 33 javelin 600 gm. 60m range for competition (wa approved) minimum 2 brands of make nelco/ate 34 javelin 600 gm. 70m range for competition (wa approved) minimum 2 brandsof make nelco/ate 35 javelin 600 gm. non range for competition (wa approved) minimum 2 brandsof make nelco/ate 36 javelin 800 gm. 60 m range for competition (wa approved) minimum 2 brandsof make nelco/ate 37 javelin 800 gm. 70 m range for competition (wa approved) minimum 2 brandsof make nelco/ate 38 javelin 800 gm. 80 m range forcompetition (wa approved) minimum 2 brandsof make nelco/ate 39 javelin 800 gm. 90 m range for competition (wa approved)minimum 2 brands of make nelco/ate 40 javelin 800 gm. non range for competition (wa approved) minimum 2 brandsof make nelco/ate 41 javelin stand (20 javelins in one stand) of make nelco 42 jumping mattress trolly 5m x 3m of make nelco 43 ladder for hammer retriving of make standard 44 pole rack (to hold 10 poles) of make nelco 45 pole vault box of make nelco 46 pole vault crow bar (bar lifter)4.0m long aliminium (telescopic) of make nelco 47 pole vault elastic cross bar of make nelco 48 pole vault fiber cross bar - 4.5m (wa approved) of make nelco 49 pole vault height measuring rod (0.00m to 5.50m) of make nelco 50 pole vault landing mattress (wa approved) of make nelco 51 pole vault uprights (wa approved) with base pair sets of make nelco 52 relay baton different colours with number 1 to 8 aluminium of make nelco 53 shot 4 kg of different dia from 95mm, 100mm, 105mm, 109mm and 110 mm for competition (tuned iron & alloy) minimum 2 brands wa approved of make nelco/ate 54 shot 7.260 kg different dia from 110mm, 115mm, 120mm, 125mm, 129mm, 130mm for competition (turned iron & alloy) minimum 2 brands wa approved of make nelco/ate 55 shot return channel 20m long of make nelco 56 shot stand (20 shots in stand) of make nelco 57 stand with bowl (mgco2/ gym chalk) of make nelco 58 starters stand of make nelco 59 starting blocks combatable with start information syatem wa approved of make nelco 60 starting blocks trolley (10 blocks in one trolly) of make nelco 61 concentric circle of make nelco 62 badminton sports equipment 63 hova courts of make yonex 64 umpire chair of make sanrit 65 basketball sports equipment 66 basketball trolley(to accommodate 15 balls) of make cosco 67 basketball trolley(to accommodate 8 balls) of make cosco 68 billiards & snooker sports equipment 69 sharma s1 snooker tables (12 x 6) with steel cushion long rest half rest spider rest goose neck rest cue extension chalk cues table cover iron ball spotter ball rack table brushes corner brusher of make sharma 70 boxing sports equipment 71 boxing ring (aibaapporved) of make greenhill 72 canoeing & kayaking sports equipment 73 kayak paddle 100% carbon graphite fiber available in ultra-light and stiff variant adjustable clamp on shaft with lock and unlock facility adjustable to 5 cm with a left and right angle protractor icf and ikca approvedof make braca iv 74 canoe paddle 100% carbon graphite fiber available in ultra-light and stiff variant adjustable clamp on shaft with lock and unlock facility adjustable to 5 cm with a left and right angle protractor icf and ikca approved of make braca iv 75 kayak ergometer length: 2.50 m - 3.10 m width: 0.40 m - 0.70 m height: 0.40 m - 0.70 m weight: 40 kg (approximate) povides easily readable, relevant numeric / graphic information to the athlete while training on the ergometer its display shows following updates: paddling time distance speed / power stroke rate / water-air ratio / max heart rate (requires serial interface to polar chest ribbon or similar) average speed / power graphic left / right power balance pacer icf and ikca approved of make dansprint aps 76 canoe ergometer length: 3.10 m - 3.30 m width: 0.40 m - 0.52 m height: 0.60 m - 0.70 m weight: 40 kg (approximate) povides easily readable, relevant numeric / graphic information to the athlete while training on the ergometer its display shows following updates: paddling time distance speed / power stroke rate / water-air ratio / max heart rate (requires serial interface to polar chest ribbon or similar) average speed / power graphic left / right power balance pacer icf and ikca approved of make dansprint aps 77 interval 2000 split / rate watch - stop watch included in the packages: - cr2032 batteries (2) - interval 2000 - interval protective bumper - lanyard memory: 2000 splits, best and average split, 600+ segments identified by date and time, stroke rate w/time unit weight: 2.2 oz (66.369 kg) display dimensions: 1.625 x 1.25 in buoyancy: floats (note: control unit with bumper and lanyard floats) display: high-contrast monochrome lcd backlight: blue/green electroluminescent backlight, auto-on controls: 5 buttons (3 side, 2 front), tactile and audible response. battery type: 2 cr2032 (1 display, 1 backlight) battery life expectancy: 300+ hours case: injection-molded polymer case, acrylic lensof make nielsen & kellerman 78 canoe knee pad made from lightweight and durable closed mini-cell foam that can be shaped for a custom fit and superior comfort icf and ikca approved of make braca iv 79 seats k1 icf and ikca approved of make nelo 80 seats k2 icf and ikca approved of make nelo 81 seats k4 icf and ikca approved of make nelo 82 foot rest k1 icf and ikca approved of make nelo 83 foot rest k2 icf and ikca approved of make nelo 84 foot rest k4 icf and ikca approved of make nelo 85 spare rudder k1 icf and ikca approved of make nelo 86 spare rudder k2 icf and ikca approved of make nelo 87 spare rudder k4 icf and ikca approved of make nelo 88 stop watch electronic with 100 memories included in the packages: - cr2032 batteries (2) - interval 2000 - interval protective bumper - lanyard memory: 2000 splits, best and average split, 600+ segments identified by date and time, stroke rate w/time unit weight: 2.2 oz (66.369 kg) display dimensions: 1.625 x 1.25 in buoyancy: floats (note: control unit with bumper and lanyard floats) display: high-contrast monochrome lcd backlight: blue/green electroluminescent backlight, auto-on controls: 5 buttons (3 side, 2 front), tactile and audible response. battery type: 2 cr2032 (1 display, 1 backlight) battery life expectancy: 300+ hours case: injection-molded polymer case, acrylic lens of make nielsen & kellerman 89 rope garware (in meter) of make nelo 90 balls (big size) of make nelo 91 life jackets ultra low olympic gold medal cut clever figure-hugging shoulder straps integrated side straps 50-70n of gaia environmentally friendly soft foam size available xs (weight: 30-50 kg) sm (weight: 45-70 kg) lxl (weight: 65-90 kg) xxl (weight: 85-110 kg) fl/xl (weight: 60-90 kg) icf and ikca approved of make hiko sports 92 slalom paddles 100% carbon, aluminium & titanium reinforced tips with adjustable shaft upto 5cm of make braca iv 93 spray deck canoe slalom blind stitched and latex sealed seams throughout. 10/11 mm shockcord style deck. 4/5 mm tough faced neoprene with silicone printed reinforcing on top. no seams in the deck section icf and ikca approved of make hiko sports 94 spray deck kayak slalom blind stitched and latex sealed seams throughout. 10/11 mm shockcord style deck. 4/5 mm tough faced neoprene with silicone printed reinforcing on top. no seams in the deck section icf and ikca approved of make hiko sports 95 helmet canoe slalom ultra lightweight competition helmet ideal for whitewater kayak / canoe racing, surf lifesaving, freestyle kayaking and rafting. construction material high impact ralvek thermoplastic for a stiffer, safer shell. the interior is a top grade closed cell eva foam liner. detachable fit pads give you a super comfortable custom fit without abosrbing moisture. low profile shell design foam vent inserts for cold water paddling interior impact liner is a low profileshell design, closed- cell waterproof eva foam weight 500 gms ce-1385 certified and icf approved for international and olympic layak / canoe racing icf and ikca approved of make hiko sports 96 life jackets canoe slalom ultra low olympic gold medal cut clever figure-hugging shoulder straps integrated side straps 50-70n of gaia environmentally friendly soft foam size available xs (weight: 30-50 kg) sm (weight: 45-70 kg) lxl (weight: 65-90 kg) xxl (weight: 85-110 kg) fl/xl (weight: 60-90 kg) icf and ikca approved of make hiko sports 97 jetties for canoe sprint material: high density polyethylene (hdpe), marlex hdpe 50100 / qtr 571 cube dimensions: 500mm x 500mm x 400mm higher holding strength - corrugated design sides to interlock cubes together for higher pressure resistance and strength in water & provision to pass cables or pipes under the cover top cover: separate cover made of marlex hdpe 50100 / qtr 571 with 20mm thick and antiskid design for extra strength & prevent wear & tear lug thickness: 22mm (+-5%)to ensure sufficient strength min. weight of cube with cover 8.5 kgs/cube (+-5%) buoyancy: 360 kgs/sq. mtr flat floor, floor stiffening with painted grip accessories and connectors: made of same hdpe material to avoid any frictional damages complete accessories, short pin, short screw & nuts, cleat, washer, required for constructing floating surface including rope ua radiation proof buoyancy test report qb 1557-1992 diagonal tensile strength test report gb/t 1040.1-2006 compressive strength test: gb/t 8813-2008 supply, installation and handover of project at site hdpe side railing, height 1000mm icf and ikca approved of make indigeous 98 k2 (not more than 18kg) 100% carbon composite construction with no added aramid fiber or glass fiber length: 650 cm weight: not more than18kg icf and ikca approved of make nelo 99 k4 (not more than 30kg) 100% carbon composite construction with no added aramid fiber or glass fiber length: 1100 cm weight: not more than30kg icf and ikca approved of make nelo 100 c1 (not more than 14kg) 100% carbon composite construction with no added aramid fiber or glass fiber length: 520 cm weight: not more than14kg icf and ikca approved of make nelo 101 c2 (not more than 20kg) 100% carbon composite construction with no added aramid fiber or glass fiber length: 650 cm weight: not more than20kg icf and ikca approved of make nelo 102 c4 (not more than 30kg) 100% carbon composite construction with no added aramid fiber or glass fiber length: 900 cm weight: not more than30kg icf and ikca approved of make nelo 103 judo sports equipment 104 judo mats for competition and warm up area (tatami) of make taishan 105 kabaddi sports equipment 106 synthetic kabaddi mats thickness 35-40 mm - total 1500 pieces for 4 courts (2 court for practice and 2 for fop) of make indigeous 107 kho kho sports equipment 108 kho-kho mats (30m x 20m) size:1m x1m . density:30 mm (approved/preferred by kfi) of make gravolite 109 kho-kho poles-sheesham ( height:120-125cms above the ground & 40-50cms below the ground, wooden circumference:9-10 cms at the top & 28.25-31.4 cm at bottom.) colour:white of make shiv naresh 110 mallakhamb sports equipment 111 pole mallakhamb for competition & warm up area above the ground 2600 to 2800 mm, under the ground 800 to 900 mm, neck 180 to 200 mm, top - 70 mm, total length 3400 - 3700 mm, circumference: bottom - 530-550 mm, below the neck 300 to 350 mm, neck 180 to 200 mm, top 350 mmof make kepl khalsa 112 hanging mallakhamb for competition & warm up area height 1700 to 1900 mm, neck height 180 to 200 mm, top height - 70 mm, distance b/w bottom and ground 650-700 mm, circumference: bottom 450 to 500 mm, neck 180 to 200 mm, below the neck 250 to 300 mmof make kepl khalsa 113 structure of hanging mallakhamb for competition & warm up area height of structure/stand - 4600 to 4800 mm, width - 12 feetof make kepl khalsa 114 structure of rope mallakhamb for competition & warm up area height of structure/stand - 5800 to 6000 mm, width - 12 feetof make kepl khalsa 115 powder stand 3 feet with steel tubeof make kepl khalsa 116 rubber foam mattresses for competition and warm up area length - 2 m, width - 1 m, thickness - 6 cm to 10 cmof make kepl khalsa 117 portable mallakhamb above the ground 2600 to 2800 mm, neck 200 mm, top - 70 mm, total length 3400 - 3700 mm, circumference: bottom - 530-550 mm, below the neck 300 to 350 mm, neck 180 to 200 mm, top 350 mmof make kepl khalsa 118 modern pentathlon 119 uipm laser pistols (shooting) (model - pp320exp laser pistol set)of make ecoaims 120 uipm laser target (shooting) (model - lt600 laser hit / miss target) of make ecoaims 121 fencing piste of make absolute fencing 122 fencing apparatus of make absolute fencing 123 pencak silat sports equipment 124 arena mattress (5 cm)(1 set of 92 green, 2 yellow, 3 red, 3 blue)of make indigenous 125 roll ball sports equipment 126 goalpost (size & design as per irbf guidelines) of make indigenous 127 rowing sports equipment 128 single scull boat imported (coastal boats) of make swift racing 129 double scull boat imported (coastal boats) of make swift racing 130 4 seat catamaran importedof make swift racing 131 catamaran obm 4 stroke 25hp of make rowing solutions 132 rugby sports equipment 133 rugby specific goal posts (set of 2 goal posts) 6 inch diameter, 20m height x 4 poles & 4 inch diameter, 6m height x 2 poles of make scrum 134 sqay martial arts sports equipment 135 arena of size 10 x 10 women (sqay arena mats) yellow & purple colour mats (total 100 pieces) of make haily 136 arena of size 12 x 12 men (sqay arena mats) yellow & purple colour mats (total 144 pieces)of make haily 137 table tennis sports equipment 138 table tennis tables - show court- black of make cosco 139 umpires tables of make cosco 140 taekwondo sports equipment 141 taekwondo mats (red & blue colour, 1m x 1m x 24mm thick, daedo or kwon or any wt approved mats) of make indigeous 142 weightlifting sports equipment 143 men bar with collar (warm up & training area) of make eleiko 144 women bar with collar (warm up & training area)of make eleiko 145 discs & plates (fop main stage) (1 set disc & plates in fop (main stage) will consist of 25 kg x 4, 20 kg x 2, 15 kg x 2, 10 kg x 2, 5 kg x 2, 2.5 kg x 2, 2 kg x 2, 1.5 kg x 2, 1 kg x 2, 0.5 kg x 2) of make eleiko 146 discs & plates (warm up & training area) (16 sets disc & plates inwarmup & training area will consist of 25 kg x 2, 20 kg x 2, 15 kg x 2, 10 kg x 2, 5 kg x 2, 2.5 kg x 2, 2 kg x 2, 1.5 kg x 2, 1 kg x 2, 0.5 kg x 2)of make eleiko 147 discs racks (warm up & training area)of make eleiko 148 powder standof make eleiko 149 resin trayof make eleiko 150 warmup & training platform(3 mts. x 3mts.)of make eleiko 151 wrestling sports equipment 152 wrestling mats of make taishan 153 wushu sports equipment 154 taolu arena of make taishan 155 for warm up area - kabaddi mats thickness 35mm,1m x 1m of make rxn 156 sanda arena of make taishan 157 for warm up area - judo mats thickness 40mm, 2m x 1m of make rxn 158 yachting sports equipment 159 rescue boats 4.5 meter rib (rigid inflatable boat), with 2000mm beam, 350mm draft (including appendages), 450mm dia. hypalon coated fabric collars of 1500gsm, 1670dtex material, with 5 airtight compartments, fitted with 40hp 4-stroke obm with manual tiller steering handle and capacity of 6 people. fuel capacity of 2 external tanks of 23-liter capacity each per boat cruising speed of 16 to 18 knots. the boat should be unsinkable when flooded and fully loaded and highly maneuverable, suiting rescue operations in seas.boat to be supplied with irs class certificate. accessories to be provided: 1no. boat repair kit, anchor with rope, 2 paddles, 1 set lifting slings. 1 bollard and 2 fairleads of make chougule fiberglass 160 jury boat 4700 mm long rib (rigid inflatable boat) with fiberglass hull, breadth of 2000mm, max draft of 450mm (including appendages), with 460mm dia. hypalon coated fabric of 1500gsm, 1670dtex, having 5 nos.foam-filled compartments, with single 60 hp 4-stroke obm fitted with remote control and steering system on a center console unit. fuel capacity of 2 external tanks of 23-liter capacity each per boat. cursing speed of 18-20 knot and a capacity of 6-8 people. the boat should be unsinkable when flooded and fully loaded and highly maneuverable.boat to be supplied with irs class certification. accessories to be provided: 1no. boat repair kit, anchor with rope, 2 paddles, 1 set lifting slings. 1 bollard and 2 fairleads of make chougule fiberglass

State Government

TRN :49020396 | 14 May, 2025

Tender Value : 0

Belagavi - Karnataka

Tender for tender for rate contract supply of disposable items to bims belagavi - corrugated drain.,water - bed,visualis-100-irrigation-aspiration-tubing-set-reusable,vaccum-suction-set-non-toxic-pyrogen-free-sterilised-disposable-ce/iso-certified(yankur-suction-set),urine-container-30ml,urine-collection-bag-1.5ltr,umbilical-venous-catherter-no5,umbilical-venous-catherter-no4,umbilical-venous-catherter-no3.5,umbilical-artery-catheter-5f,twin-bore-nasal-canula-adult,tracheostomy-tubes-with-no8.5-cuff-protex-or-equivalent,tracheostomy-tubes-with-no7.5-cuff-protex-or-equivalent,tracheostomy-tubes-with-no7.0-cuff-protex-or-equivalent,tracheostomy-tubes-with-no6.0-cuff-protex-or-equivalent,tracheostomy-tubes-with-no5.0-cuff-protex-or-equivalent,tracheostomy-tubes-with-no.0-cuff-protex-or-equivalent,tracheostomy-tubes-silicon-uncuff-size(pead)5.0,tracheostomy-tubes-silicon-uncuff-size(pead)4.5,tracheostomy-tubes-silicon-uncuff-size(pead)4.0,tracheostomy-tubes-silicon-uncuff-size(pead)3.5,tracheostomy-tubes-silicon-uncuff-size(pead)3.0,tracheostomy-tubes-silicon-uncuff-size(pead)2.5,tracheostomy-tubes-kit-uncuff-size4.5,tracheostomy-tubes-kit-uncuff-size4,tracheostomy-tubes-kit-uncuff-size3.5,tracheostomy-tubes-kit-uncuff-size3,tracheostomy-tubes-kit-size4.5,tracheostomy-tubes-kit-size4,t - protector,thermal-paper(high-quality)for-use-with-edan-se-1200-ecg-machine(1x100)-packa4-size,suction-catheters-no8,suction-catheters-no6,suction-catheters-no16,suction-catheters-no14,suction-catheters-no12,suction-catheters-no10,stillets-fitting-for-sizes7-endotracheal-tube,stillets-fitting-for-sizes4-endotracheal-tube,stillets-fitting-for-sizes3-endotracheal-tube,stillets-fitting-for-sizes2.5--endotracheal-tube,stillets-fitting-for-sizes2-endotracheal-tube,sterile-disposable-infusion-set(iv-infusion-set),steri-drape-for-ent,stehtoscope-peadiatric,stehtoscope-adult,stainless-steel-hydro-cannula-no.24,spinal-needle-no27g,spinal-needle-no26g,spinal-needle-no25g,spinal-needle-no24g,spinal-needle-no23g,spinal-needle-no22g,spinal-needle-no20g,spinal-needle-no18g,spc-catheter-malecot-with-stillete-fr20,spc-catheter-malecot-with-stillete-fr18,spc-catheter-malecot-with-stillete-fr16,spc-catheter-malecot-with-stillete-fr14,spc-catheter-malecot-with-stillete-fr12,spc-catheter-malecot-with-stillete-fr10,spc-catheter.,sony-thermal-glossy-paper-rolls-for-ultra-sound-typev,skin-staplers-disposable-35w-regular-size,skin-grafting-blade(humby-knife-blade),simcoe-irrigating-aspirating-cannula-22g,simco-cannula-no.22,siliconized-endotracheal-tubes-size4.5-without-cuff,siliconized-endotracheal-tubes-size4.0-without-cuff,siliconized-endotracheal-tubes-size3.5-without-cuff,siliconized-endotracheal-tubes-size3.0-without-cuff,siliconized-endotracheal-tubes-size2.5-without-cuff,siliconized-endotracheal-tubes-size2.0-without-cuff,side-port-blade-,septal-buttons,scented-masks-inflatable-cuff5,scented-masks-inflatable-cuff4,scented-masks-inflatable-cuff3,scented-masks-inflatable-cuff2,sanitary-napkin(size-extra-large),ryles-tube-no8,ryles-tube-no6,ryles-tube-no5,ryles-tube-no18,ryles-tube-no17,ryles-tube-no16,ryles-tube-no14,ryles-tube-no12,ryles-tube-no10,ryles-tube-no.-20,rubber-toniquet-no.6,rubber-toniquet-no.4,romovac-drain16,romovac-drain14,romovac-drain12,red-rubber-torniquet-4inch,red-rubber-catheter-no8,red-rubber-catheter-no7,red-rubber-catheter-no12,red-rubber-catheter-no11,red-rubber-catheter-no10,rae-ivory-pvc-nsala-tubes-with-soft-seal-cuff6,radiography-dry-laser-films-14inchx17inch(shall-give-one-cr-film-printer-free-of-cost-which-should-be-compatible-with-existing-fuji-cr-reader),radiography-computer-radiography-film-8inchx10inch(shall-give-one-cr-film-printer-free-of-cost-whichshould-be-compatible-with-existing-fuji-cr-reader),proseal-laryngeal-mask-airway-reusable-no4,proseal-laryngeal-mask-airway-reusable-no3,pigtail-catheter-8,pigtail-catheter-20,pigtail-catheter-18,pigtail-catheter-12,photo-therapy-eye-pad/goggles,phaco-tubings,peripherally-insrted--central-catheter-picc,pelvic-binder-l-size,papsmear-kit-(cytobrush-with-spatulla),oxygen-mask(adult),oxygen-mask-paediatric,ot-mask-with-tie-knot,optivantage-high-pressure-syringe-200ml,nrb-mask,north-polar-preformed-ivory-pvc-nasal-tubes-cuff8,north-polar-preformed-ivory-pvc-nasal-tubes-cuff7,north-polar-preformed-ivory-pvc-nasal-tubes-cuff6.5,nasal-splints-(internal-nasal-splints),nasal-splints-(external-nasal-splints),nasal-canula-paediatrics,nasal-02cannula-,n95-mask,micro-drip-set,measured-volume-set(coomb-set),long-arm-splint-universal,laryngscope-paediatric-conventional-4blades-set,laryngscope-adult-conventional-4blades-set,laparoscopic-tubal-ligation-band,lacrimal-stent,keratome-blade-2.8mm,iv-extension-3way-10cm,iv-extension-100cm,iobon-(antimicrobial-incise-drape-60x45-cm),iobon-(antimicrobial-incise-drape-34x35-cm),intubating-styleptes-small,intubating-styleptes-medium,intubating-styleptes-large,intubating-lma-reusable-size5,intubating-lma-reusable-size4,intubating-lma-reusable-size3,intrajagular-catheter-no10,intra-oculr-lens(foldable)no9-injector-system-preferably-2.8mm,pigtail-catheter-14,intra-oculr-lens(foldable)no8-injector-system-preferably-2.8mm,intra-oculr-lens(foldable)no6-injector-system-preferably-2.8mm,intra-oculr-lens(foldable)no5-injector-system-preferably-2.8mm,intra-oculr-lens(foldable)no23-injector-system-preferably-2.8mm,intra-oculr-lens(foldable)no22-injector-system-preferably-2.8mm,intra-oculr-lens(foldable)no21-injector-system-preferably-2.8mm,intra-oculr-lens(foldable)no20-injector-system-preferably-2.8mm,intra-oculr-lens(foldable)no19-injector-system-preferably-2.8mm,intra-oculr-lens(foldable)no17-injector-system-preferably-2.8mm,intra-oculr-lens(foldable)no16-injector-system-preferably-2.8mm,intra-oculr-lens(foldable)no15-injector-system-preferably-2.8mm,intra-oculr-lens(foldable)no14-injector-system-preferably-2.8mm,intra-oculr-lens(foldable)no13-injector-system-preferably-2.8mm,intra-oculr-lens(foldable)no12-injector-system-preferably-2.8mm,intra-oculr-lens(foldable)no11-injector-system-preferably-2.8mm,intra-oculr-lens(foldable)no10-injector-system-preferably-2.8mm,intra-ocular-lens(sf-iol)dia-13.5mm-optic6.5-size21,intra-ocular-lens(sf-iol)dia-13.5mm-optic6.5-size20,intra-ocular-lens(sf-iol)dia-13.5mm-optic6.5-size19,intra-ocular-lens(sf-iol)dia-13.5mm-optic6.5-size18,intra-ocular-lens(sf-iol)dia-13.5mm-optic6.5-size17,intra-ocular-lens(pciol)no26-optic-diameter-5.25mm-and-size-13mm,intra-ocular-lens(pciol)no25-optic-diameter-5.25mm-and-size-13mm,intra-ocular-lens(pciol)no24-optic-diameter-5.25mm-and-size-13mm,intra-ocular-lens(pciol)no23-optic-diameter-5.25mm-and-size-13mm,intra-ocular-lens(pciol)no22-optic-diameter-5.25mm-and-size-13mm,intra-ocular-lens(pciol)no21-optic-diameter-5.25mm-and-size-13mm,intra-ocular-lens(pciol)no21.5-optic-diameter-5.25mm-and-size-13mm,intra-ocular-lens(pciol)no20-optic-diameter-5.25mm-and-size-13mm,intra-ocular-lens(pciol)no20.5-optic-diameter-5.25mm-and-size-13mm,intra-ocular-lens(pciol)no19-optic-diameter-5.25mm-and-size-13mm,intra-ocular-lens(pciol)no19.5-optic-diameter-5.25mm-and-size-13mm,intra-ocular-lens(pciol)no18-optic-diameter-5.25mm-and-size-13mm,intra-ocular-lens(pciol)no17-optic-diameter-5.25mm-and-size-13mm,intra-ocular-lens(pciol)no16-optic-diameter-5.25mm-and-size-13mm,intra-ocular-lens(iris-claw)size-5.5x8mm-no24d,intra-ocular-lens(iris-claw)size-5.5x8mm-no23d,intra-ocular-lens(iris-claw)size-5.5x8mm-no22d,intra-ocular-lens(iris-claw)size-5.5x8mm-no16d,intra-ocular-lens(iris-claw)size-5.5x8mm-no21,intra-ocular-lens(iris-claw)size-5.5x8mm-no20,intra-ocular-lens(iris-claw)size-5.5x8mm-no19,intra-ocular-lens(iris-claw)size-5.5x8mm-no18,intra-ocular-lens(iris-claw)size-5.5x8mm-no17,intra-ocular-lens(aciol)no19.5-optic-diameter5.25mm-and-size-13mm,intra-ocular-lens(aciol)no19-optic-diameter5.25mm-and-size-13mm,intra-ocular-lens(aciol)no18-optic-diameter5.25mm-and-size-13mm,intra-ocular-lens(aciol)no17-optic-diameter5.25mm-and-size-13mm,intra-ocular-lens(aciol)no16-optic-diameter5.25mm-and-size-13mm,intra-ocular-lens(aciol)no15-optic-diameter5.25mm-and-size-13mm,intra-ocular-lens(aciol)no14-optic-diameter5.25mm-and-size-13mm,intra-ocular-lens(aciol)no12-optic-diameter5.25mm-and-size-13mm,intra-ocular-lens(aciol)no11-optic-diameter5.25mm-and-size-13mm,intersurgical-i-gel-no.-5.0,intersurgical-i-gel-no.-4.0,intersurgical-i-gel-no.-3.5,intersurgical-i-gel-no.-3.0,infant-feeding-tube-no9,infant-feeding-tube-no8,infant-feeding-tube-no7,infant-feeding-tube-no6,infant-feeding-tube-no5,infant-feeding-tube-no10,ijc-dialysis-catheters-dual-luman-with-ctheter-kit-curved-extension-and-laser-cut-side-slots-3.8mmx13.5,i-gel-supraglottic-airways(inter-surgical)-size2.5,i-gel-supraglottic-airways(inter-surgical)-size2,i-gel-supraglottic-airways(inter-surgical)-size1.5,i-gel-supraglottic-airways(inter-surgical)-size1,icds-bags,icd-tubes-trocer-no32,icd-tubes-trocer-no30,icd-tubes-trocer-no28,icd-tubes-trocer-no24,icd-tubes-trocer-no16,icd-tubes-trocer-no14,heparinised-syringes-(for-abg-analysis)(plastic-round-disposable-heparin-coated-abg-syringe,14g,-packet),hemolock-(weck)-clips-size-600,hemolock-(weck)-clips-size-400,hemolock-(weck)-clips-size-200,hb-strips-with-machine(should-give-one-machine-free-of-cost-for-each-500-strips),glucometer-strips-with-machine(should-give-one-machine-free-of-cost-for-each-1000-strips),folleys-catheters-no.22,folleys-catheters-no.20,folleys-catheters-no.18,folleys-catheters-no.16,folleys-catheters-no.14,folleys-catheters-no.12,folleys-catheters-no.10,folleys-catheters-no.08,folleys-catheters-no.06,folleys-catheter-three-way--22fr,folleys-catheter-three-way--20fr,folleys-catheter-silicone-two-way-18fr,folleys-catheter-silicone-two-way-16fr,folleys-catheter-silicone-two-way-14fr,extension-with-integrated-bi-way-50cm,extension-with-integrated-bi-way-25cm,extension-with-integrated-bi-way-10cm,examination-gloves(small-size),examination-gloves(medium-size),examination-gloves(large-size),examination-gloves(extra-small-size),endotracheal-tubes-size9.5with-cuff,endotracheal-tubes-size9.0without-cuff,endotracheal-tubes-size9.0with-cuff,endotracheal-tubes-size8.5without-cuff,endotracheal-tubes-size8.5with-cuff,endotracheal-tubes-size8.0without-cuff,endotracheal-tubes-size8.0with-cuff,endotracheal-tubes-size7.5without-cuff,endotracheal-tubes-size7.5with-cuff,endotracheal-tubes-size7.0without-cuff,endotracheal-tubes-size7.0with-cuff,endotracheal-tubes-size6.5without-cuff,endotracheal-tubes-size6.5with-cuff,endotracheal-tubes-size6.0without-cuff,endotracheal-tubes-size6.0with-cuff,endotracheal-tubes-size5.5without-cuff,endotracheal-tubes-size5.5with-cuff,endotracheal-tubes-size5.0without-cuff,endotracheal-tubes-size5.0with-cuff,endotracheal-tubes-size4.5without-cuff,endotracheal-tubes-size4.5with-cuff,endotracheal-tubes-size4.0without-cuff,endotracheal-tubes-size4.0with-cuff,endotracheal-tubes-size3.5without-cuff,endotracheal-tubes-size3.5with-cuff,endotracheal-tubes-size3.0without-cuff,endotracheal-tubes-size3.0with-cuff,endotracheal-tubes-size2.5without-cuff,endotracheal-tubes-size2.5with-cuff,endotracheal-tubes-size2.0without-cuff,endotracheal-tubes-size2.0with-cuff,elbow-gloves(small),elbow-gloves(medium),elbow-gloves(large),elastic-adhesive-bandage-10cmsx4/6mtr,ecg-rolls-106mm-4inch,ecg-paper-roll-size-3inch(80mm-x-20-mtrs),ecg-chest-leads-disposable,ear-foam-tips-small-size.,ear-foam-tips-big-size.,ear-foam-tips-for-paediatrics-packets,ear-foam-tips-for-adults-packets,dry-laser-films-14inchx17inch(shall-give-one-cr-film-printer-free-of-cost-which-should-be-compatible-with-existing-fuji-cr-reader),disposable-syringe-5ml-with-23g-needle,disposable-syringe-50ml-with-needle,disposable-syringe-2ml-with-23g-needle,disposable-syringe-20ml-with-needle.,disposable-syringe-1ml-26x1.5-g,disposable-syringe-10ml-with-needle,disposable-plastic-sheet,disposable-plastic-apron-material-hmhd/ldp-plastic-colour-medical-blue-length-52inch-56inch-(below-the-knee)-size-medium-blood-and-water-resistant-fits-men-and-women,disposable-ot-masks-three-layer-with-6.5inch-ear-loop-melt-blown-cloth-and-non-woven-material-colour-medical-blue-dimension-6.88-inchx-3.74inch-outside-layer-leak-proof-non-woven-abric(25gsm)middle-layer-high-density-filter-yer(25gsm)-melt-blown-fabric-bfe-more-and-equivalent-to95%inner-layer-direct-contact-skin-layer-non-woven-fabric-quad-fold-design-pleat-depth-design-5/8inch-size-universal-certification-ce-iso/astm-level1,disposable-ot-caps-25-gsm-medical-grade-polypropylene-spun-bond-non-woven-materials-with-ultrasonic-sealed-with-small-elastic-at-the-back,disposable-needle-no26g-half-inch,disposable-needle-no.-24g,disposable-needle-no.-20g,disposable-needle-no.-18g,disposable-microtone-blade-high-profile-set,disposable-mackintosh-sheet,disposable-iv-cannula-26g,disposable-iv-cannula-24g,disposable-iv-cannula-22g,disposable-iv-cannula-20g,disposable-iv-cannula-18g,disposable-iv-cannula-16g,disposable-insulin-syringe-1ml(0.25x6mm),disposable-hiv-protection-kit hiv-kits-discription.-(1) surgical-gown-1piece (2) face-mask-1piece (3) face-protector-1piece (4) head-cap-1piece (5) shoe-cover-1 piece (6) gloves-1 piece,disposable-gown,disposable-glove-7inch(pair)-disposable-sterile-isi-or-ce-marked-gloves,disposable-glove-7.5inch(pair)-disposable-sterile-isi-or-ce-marked-gloves,disposable-glove-6inch(pair)disposable-sterile-isi-or-ce-marked-gloves,disposable-glove-6.5inch(pair)disposable-sterile-isi-or-ce-marked-gloves,disposable-crescent-blades,disposable-bed-sheet-colour-medical-blue-disposable-breathable-chemical-free-skin-friendly-bacterial-and-viral-barrier-tear-and-puncture-resisitant-impervious-and-repellant-to-fluids-adhesive-strip-fitted-elastic-on-all-boundaries-sterilized-dimension-and-weight-width-160cm-length-180cm-weight-of-bedsheet-130gram-material-nonwoven-fabric-polycoated-gsm-of-non-woven-material(g/m2)-40-to-60certifications-and-reports-aami-protection-level-level-iv-certification--iso-13485-medisurge-or-equivalent,disposable-a-scopy-shaver-4.00mm,disposable-1.5inch-needle-length,-26-gauge-needle-thickness-and-2ml-syringe-with-thread-locking-system-(unilock),disafe-plus-,diaper(adult)m-l(30inch-to-50inch),diaper-newborn(2-5kg),dialyser-suitable-for-fresenius-dialyser-machine0.8(m2)inline-steam-sterilization-reusable,dialyser-suitable-for-fresenius-dialyser-machine(f6)1.3(m2)inline-steam-sterilization-reusable-,dermatome.,dcr-stents-(dacrocystorhinostomy),dark-goggle,cord-clamp,computer-radiography-film-8inchx10inch(shall-give-one-cr-film-printer-free-of-cost-whichshould-be-compatible-with-existing-fuji-cr-reader),collegen-sheet-dressing,chest-drain32,chest-drain30,chest-drain28,chest-drain24,central-venous-line7,central-venous-line6.5,central-venous-line6.0,central-venous-line5,central-venous-line4.5,central-venous-line4,central-venous-line3.5,blood_lancet.,central-venous-line3.0,central-line-triple-lumen-,central-line-double-lumen-,cannula-fixator-,caesarian-drape-sterilized-disposable-non-woven-material-disposable-breathable-chemical-free-skin-friendly-bacterial-and-viral-barrier-tear-and-puncture-resisitant-impervious-and-repellant-to-fluids-colour-medical-blue-43gsm-size-160cmx250cm-43gsm-8mms-100cmx80cm-absorbent-80gsm-10inch-hole-2inch-adhesives-with-butter-paper,bone-wax-2.5gms-each-pkt,-1-box-contains-12-pieces-per-box,blood-transfusion-set,blood-tubing-set,blood-bags-double-450-ml,blood-bags-double-350-ml,biway-cannula,biopsy-disposable-punches--3.5,biopsy-disposable-punches--3,biopsy-disposable-punches--2.5,biopsy-disposable-punches--2,b-p-blade-no11,b-p-blade-no.12,b-p-blade-no.-21,b-p-blade-no.-20-,b-p-blade-no.-15,avf-needle-17g,a-scopy-burr-4.mm,angiographic-syringe-ct-and-mr-connector-pipe-compatable,angiographic-syringe-connection-pipe-two-way/by-way,angiographic-syringe-connection-pipe-single-way,angiographic-disposable-syringe-ct-and-mri-4x12,angiographic-disposable--syringe-200ml,ambu-bag-set-autoclavable-paediatric,ambu-bag-set-autoclavable-neonatal,ambu-bag-set-autoclavable-adult,ambu-bag-reservior-750ml,ambu-bag-reservior-500ml,ambu-bag-reservior-250ml,ambu-bag-reservior-1000ml,ambu-bag-face-mask-size2,ambu-bag-face-mask-size1,ambu-bag-face-mask-size00,ambu-bag-face-mask-size0,airways-no-3,airways-no-2,airways-no-1,air-bed-,adhesive-abdomen-drape,abgel-(gel-foam),abdominal-drain-kit-size-32,abdominal-drain-kit-size-30,abdominal-drain-kit-size-28,abdominal-drain-kit-size-26,abdominal-drain-kit-size-24

State Government

TRN :49020506 | 31 May, 2025

Tender Value : 0

Bengaluru - Karnataka

Tender for supply of rescue shoring items as per department technical specification - rescue shoring items--1 a mechanical strut with self-retaining thread, plunger with thread. when the plunger is extended the thread shall be self-retaining. the axial displacement per rotation shall not be more than 17 mm. it shall have female snap-lock system on both sides retracted length shall not be less than 250 mm, stroke : 120 mm and weight : 3.5 kg 2 strut with hydraulic single acting cylinder with spring return and a plunger with thread and lock nut. the axial displacement per rotation shall not be more than 17 mm. it shall have female snap-lock system on both sides working pressure : 720 bar / 72 mpa retracted length : 575 mm stroke : 252 mm weight, ready for use : 9.2 kg force at working pressure : 100 kn/10.1 t 3 strut with pneumatic single acting cylinder with spring return with plunger with automatic locking mechanism that locks in steps of 9 mm. retracting the plunger shall be possible only after releasing the locking mechanism. it shall have female snap-lock system on both sides working pressure : 8 bar / 0.8 mpa retracted length : 632 mm stroke : 252 mm weight, ready for use : 8.4 kg force at working pressure :4 kn/0.4 t 4 a suitable hydraulic pump shall be provided for using the hydraulic strut. the pump shall be fitted with a pressure gauge 0-720 bar with rubber protection cover and with 3 m. hose and quick coupler. the pump shall be mounted on a wooden plate. working pressure : 720 bar / 72 mpa effective capacity oil tank : 700 cc output per stroke 1st stage : 11 cc up to 30 bar output per stroke 2nd stage : 2 cc up to 720 bar weight ready for use : 9.9 kg 5 extension pipe fitted with male snap-lock system on one side and female snap-lock system on the other side. length : 125 mm colour code : white weight : 1.5 kg outside diameter : 90 mm working load : 100 kn/10.1 t 6 extension pipe fitted with male snap-lock system on one side and female snap-lock system on the other side. length : 250 mm colour code : blue weight : 1.9 kg outside diameter : 90 mm working load : 100 kn/10.1 t 7 extension pipe fitted with male snap-lock system on one side and female snap-lock system on the other side. length : 500 mm colour code : yellow weight : 2.8 kg outside diameter : 90 mm working load : 100 kn/10.1 t 8 extension pipe fitted with male snap-lock system on one side and female snap-lock system on the other side. length : 1000 mm colour code : green weight : 4.6 kg outside diameter : 90 mm working load : 100 kn/10.1 t 9 a suitable connector with female snap-lock on both sides shall be provided to connect the male end of an extension pipe with one of the saddles weight : 1.4 kg outside diameter : 89 mm working load: : 100 kn/10.1 t 10 2-way block to support 2 tilting heads.. weight : 6 kg 11 3-way swivel head with 3 integrated swivel heads for use with up to 3 shoring lines in various directions. weight : 9.1 kg 12 support plate for use with the tensioning belts and cylinders or extension pipes,. the plate should support 3 swivel heads or a cross head and up to 3 tensioning belts. weight : 4.0 kg cross head 4 nos. weight : 1.1 kg 13 v-block small (aluminium block) to support on or against tubes. weight : 0.7 kg diameter : 89 mm 14 tilting head on plate with nailing holes in the plate for support on uneven or tilting surfaces. max. angle 45° in all directions. weight : 2.5 kg dimensions : 150 x 150 mm 15 swivel head mounted on a sphere to place the head in almost any position. weight : 2.0 kg 16 tilting head for support on uneven or tilting surfaces. max. angle 45° in all directions. weight : 2.5 kg, dimensions : 95 x 95 mm 17 v-block large (aluminium block) to support on or against tubes. weight : 1.7 kg opening x width : 141 x 100 mm 18 pointed head for support in narrow gaps weight : 1.2 kg diameter : 89 mm 19 cone head for support on or against hard concrete or steel surfaces. the point shall be of hardened steel to partially penetrate the surface and prevent the strut or extension pipe from sliding away weight : 0.5 kg diameter : 89 mm 20 flat head (round aluminium saddle) for support against a flat, soft surface like wood. 2 nos. weight : 0.3 kg diameter : 89 mm 21 hook wrench shall be adjustable to create a pre-load with the mechanical strut diameter : 90 mm tensioning belt 6 nos. weight : 1.4 kg length : 4.0 m width : 35 mm load : 10 kn/ 1 t 22 rope 5 mtrs long with carabine hook. to lower struts, or wrapping around the strut 23 flat head (saddle) for support against a flat soft surface like wood. the steel plate (150150 mm) shall have holes to nail the saddle to wood. weight : 0.8 kg dimensions : 150150 mm 24 beam support l-shape for support on or against very wide beams. the beam support shall have holes to nail it to wooden beams. weight : 1.0 kg 25 beam support 100 mm for support on or against upto 100 mm wide beams. the beam support shall have holes to nail it to wooden beams. weight : 1.2 kg 26 beam support 150 mm for support on or against upto 150 mm wide beams. the beam support shall have holes to nail it to wooden beams. weight : 1.7 kg 27 pressure reducer with air hose 2 m. with coupler suitable for both 200 and 300 bar air cylinders 28 double control unit for simultaneous operation of 2 tools with safety valves set at 8.5 bar and operation by means of push buttons with auto lock couplers 29 air hose length 10 metres colour blue with standard coupler on both sides. 30 air hose length 5 metres colour yellow with standard coupler on both sides. 31 anti-roll block made from flexible rubber to prevent struts and extension pipes rolling on uneven surfaces and protect against dirt and damage. 32 synthetic carrying / storage bag for struts and extension pipes. 33 storage / carrying bag for accessories

corporations/Associations/Others

TRN :49021828 | 13 May, 2025

Tender Value : 0

Pune - Maharashtra

Tender for providing basic facilities at pune municipal corporation and rani lakshmibai womens industrial training institute-1. non comprehensive maintence contract of computer with al necessary supplying accessories, servicing & software data loading as per instruction by dept. non comprehensive maintanence contract of ups batteries with all necessary supplying accessories, servicing as per instruction by dept. headphones with mic with 3.5 mm drivers, in-built noise cancelling foldable and adjustable - driver size 40mm speaker impedance 32 ohm frequency response-20hz-20khz sensitivity-105db microphone impedance - 1.2k ohm microphone sensitivity = -58db + 2db connector type dual 3.5mm jack cable length-1.8m package dimension - 168 x 90 x 200 mm warranty 1 year usb 3.0 desktop ram - item height-13.3 centimeters item width - 0.1 inches ram size 8 gb memory technology- ddr3 computer memory type ddr3 sdram memory clock speed - 1600 mhz voltage-1.5 volts wattage - 1.2 warranty 1 years web camera for desktop dsp chip: driverless image sensor: cmos lens: 5p lens digital zoom: 4x zoom digital video format: mjpg, yuy2 wide angle: 85-90 degree lens: superior quality glass lens dynamic resolution: 1280x720p frame rate: 30fps (usb2.0) line length: 140cm system support: windows xp/vista/7/8/10 warranty - 1 years solid state drive interface - nvme (pcie gen 4 x4) ssd endurance (tbw) 300tb form factor m.2 (2280) ssd series-t500 capacity 500gb sequential read-7200 mb/s sequential write-5700 mb/s warranty 3 years 7 mouse optical tracking dpi (min/max): 1000? number of buttons: 3 (left/right-click, middle click) line-by-line scrolling scroll wheel: yes, optical black plastics: 72% post-consumer recycled material product carbon footprint: 1.73 kg co2e 3-year limited hardware warranty cable length: 180 cm warranty 1 years keyboard spill-resistant design 10-key number pad caps lock indicator light num lock indicator light up to 10 million keystrokes key type: deep profile black plastics: 51% post-consumer recycled material product carbon footprint: 4.02 kg co2e 3-year limited hardware warranty warranty 1 years pendrive - 64gb flash drive compatible with: laptops | desktops form factor: flash version: usb 3.0 password protection 60 months warranty 10. 12. supply & fixing of wiring & cabling complete set up for indoor and outdoor for wiring, cctv setup and networking connector type-bnc cable type - coaxial compatible devices - camera special feature - high speed compatible phone models - hd camera ethernet cable category - cat 5 connector gender - female-to-male 13. providing, fixing & fitting of 1 sqmm, 2.5 sqmm & 6 sq.mm wiring & cabling set up with all neccesary points & material including casing, caping & labour & all light fittings, earthing, l point, p point, circuit point, light point, fan point, full plug point, half plug point, power point, ac point, led tube lights & tube fitting, fan regulators, fan dimmers etc. 10. new motor 1/16 hp novel / rajesh / navkar 11. sewing machine table novel rajesh / navkar 14. sewing machine double part servicing novel / rajesh / navkar 8.

corporations/Associations/Others

TRN :49022093 | 13 May, 2025

Tender Value : 0

Pune - Maharashtra

Tender for providing basic facilities for various vocational training centers of the pune municipal corporation social development department.=1. 2. 3. non comprehensive maintence contract of computer with all neccsa supplying accessories, servicing & software data loading as f instruction by dept. stitching machine headphones with mic with 3.5 mm drivers, in-built noise cancellir foldable and adjustable - driver size 40mm 4. 5. 6. speaker impedance - 32 ohm frequency response-20hz-20khz microphone impedance-1.2k ohm 7 sensitivity-105db microphone sensitivity = -58db+2db connector type dual 3.5mm jack cable length-1.8m package dimension - 168 x 90 x 200 mm warranty - 1 year usb 3.0 desktop ram - item height-13.3 centimeters item width-0.1 inches ram size 8 gb memory technology- ddr3 computer memory type ddr3 sdram memory clock speed - 1600 mhz voltage - 1.5 volts wattage-1.2 warranty 1 years web camera for desktop dsp chip: driverless image sensor: cmos lens: sp lens digital zoom: 4x zoom digital video format: mjpg, yuy2 wide angle: 85-90 degree lens: superior quality glass lens dynamic resolution: 1280x720p frame rate: 30fps (usb2.0) line length: 140cm system support: windows xp/vista/7/8/10 warranty 1 years solid state drive interface nvme (pcie gen 4 x4) ssd endurance (tbw) 300tb form factor m.2 (2280) 5sd series 1500 capacity 500gb sequential read-7200 mb/s sequential write-5700 mb/s warranty 3 years mouse optical tracking dpi (min/max): 1000± number of buttons: 3 (left/right-click, middle click) line-by-line scrolling 8. 9. keyboard spill-resistant design 10-key number pad caps lock indicator light num lock indicator light up to 10 million keystrokes (excludes number lock key) key type: deep profile black plastics: 51% post-consumer recycled material product carbon footprint: 4.02 kg co2e 3-year limited hardware warranty warranty 1 years pen drive - 64gb flash drive compatible with: laptops | desktops form factor: flash version: usb 3.0 password protection 60 months warranty new motor 1/16 hp novel / rajesh / navkar sewing machine table novel rajesh / navkar 10. 11. 12. pressure ta 1 novel / rajesh / navkar 13. datri novel / rajesh / navkar 14. needle plate novel / rajesh / navkar 15. shuttle japan novel rajesh navkar 16. needle bar novel / rajesh / navkar 17. tension set novel / rajesh / navkar 18. side plate novel / rajesh / navkar 19. wheel bush novel / rajesh / navkar 20. dollar novel / rajesh / navkar 21. needle packet novel / rajesh / navkar 22. stopper strip novel rajesh / navkar 23. oil can 90 ml novel rajesh / navkar 24. measuring tape novel / rajesh / navkar 25. bobbing case double part novel rajesh / navkar 26. bobbing case single part novel rajesh / navkar 27. badi novel / rajesh / navkar 28. kana ta1 novel / rajesh / navkar 29. 30. 297 check nut novel / rajesh / navkar 31. needle pliers novel / rajesh / navkar takeup lever novel / rajesh / navkar 32. tweezers novel / rajesh / navkar 33. connecting novel / rajesh / navkar 34. stop moshav novel / rajesh / navkar 35. stop wire novel / rajesh / navkar 36. pressure bar novel / rajesh / navkar 37. pressure bar piece - novel / rajesh / navkar 38. clock novel / rajesh / navkar 39. clock pin novel / rajesh / navkar 40. reverse lipter novel / rajesh / navkar 41. india gate novel / rajesh / navkar 42, daab nut novel / rajesh / navkar 43. wider novel / rajesh / navkar 44. face plate novel / rajesh / navkar - 45. chand thali novel / rajesh / navkar - 46. break set novel / rajesh / navkar 47. patra ta1 novel / rajesh / navkar

State Government

TRN :49022392 | 13 May, 2025

Tender Value : 31.44 Lacs

Gangapur - Maharashtra

Tender for providing electrical installation in, premises street light, water pump and fire extinguisher for the newly constructed zilla parishad primary health center (p .h .c)main building (g.f+f.f) [under scheme d.p.c. (general) year 2022-23, 34512595 construction expantion & m/ce & repairs of p.h.c/ phsc) at village,lasur stationtq. gangapurdist. chhatrapati sambhajinagar.= 1 supplying and erecting 25 mm dia. corrugated flexiblepolypropyleneconduit 2 supplying anderectingpvctrunking (pvccasing-n-capping)ofsize25 mm with accessorieson wall/ceiling as per specification no: wg-ma/con. 3 supplying anderectingpvctrunking (pvc casing-n-capping)ofsize20 mm with accessorieson wall/ceiling as per specification no: wg-ma/con. 4 supplying anderectingpvctrunking (pvccasing-n-capping)ofsize32 mm with accessorieson wall/ceiling as per specification no: wg-ma/con. 5 supplying anderectingpvctrunking (pvccasing-n-capping)ofsize40 mm with accessorieson wall/ceiling as per specification no: wg-ma/con. 6 supplying and erecting mains with 2x1.5 sq.mm frlshcopperpvc insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places as per specification no: wg-ma/bw 7 supplying and erecting green earth wire 1x1.5 sq.mm frlshcopperpvc insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places as per specification no: wg-ma/bw 8 supplying and erecting mains with 2x2.5 sq.mmfrlsh copper pvc insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places. as per specification no: wg-ma/bw 9 supplying and erecting green earth wire 1x2.5 sq.mmfrlsh copper pvc insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places. as per specification no: wg-ma/bw 10 supplying and erecting mains with 4x2.5 sq.mmfrlsh copper pvc insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places. as per specification no: wg-ma/bw 11 supplying and erecting mains with 2x4 sq.mm frlsh copper pvc insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places. as per specification no: wg-ma/bw 12 supplying and erecting mains with 4x4 sq.mm frlsh copper pvc insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places. as per specification no: wg-ma/bw 13 supplying and erecting green earth wire 1x4 sq.mm frlsh copper pvc insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places. as per specification no: wg-ma/bw 14 supplying and erecting mains with 4x6 sq.mm frlsh copper pvc insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places. as per specification no: wg-ma/bw 15 supplying and erecting pvc insulated pvc round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multi strandedcopper industrial cable for voltage grade up to 1.1 kv 16 supplying and erecting pvc insulated pvc round sheathed 2.5 sq.mm (50 no. x 0.25 mm dia.) 3 core flexible multi strandedcopper industrial cable for voltage grade up to 1.1 kv 17 supplying and erectingceiling rose / batten holder / slanting holder / hanging cord switch / hanging bell push / pendant holder bakelite base 6a. erected on filled polypropylene board or polished double wooden block/ pvc junction box. 18 supplying and erectingmodular type switch 6a / 10a duly erected on provided plate and box with wiring connections complete. 19 supplying and erectingmodular type switch 16aduly erected on provided plate and box with wiring connections complete. 20 supplying and erectingmodular type bell-push with indicator 2 modules 6a / 10a, duly erected on provided plate and box with wiring connections complete. 21 supplying and erectingmodular type 3 pin 6amultisocket with safety shutter, duly erected on provided plate and box with wiring connections complete. 22 supplying and erectingmodular type 3 pin 6 / 16amultisocket with safety shutter,duly erected on provided plate and box with wiring connections complete. 23 supplying and erectingmodular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete. 24 supplying and erecting modular type blanking plate one module, duly erected on provided plate & box. 25 supplying and erecting pvc surface modular switch box with double mounting plate for 2module duly erected. 26 supplying and erecting pvc surface modular switch box with double mounting plate for 3module duly erected. 27 supplying and erecting pvc surface modular switch box with double mounting plate for 6module duly erected. 28 supplying and erecting pvc surface modular switch box with double mounting plate for 12module duly erected. 29 supplying and erecting 16 / 20 / 25 a starter (modular range) 2 module for ac unit on provided box complete & duly concealed with necessary material and connected. 30 point wiring for light/bell/exhaust fan in pvc trunking (casing-capping) with 1.5 sq.mm (2+1e) frlsh grade copper wire, modular type switch, earthingand required accessories as per specification no: wg-pw/sw 31 point wiring for ceiling fan in pvc trunking (casing-capping) with 1.5 sq.mm (2+1e) frlsh grade copper wire, modular type switch, earthingand required accessories as per specification no: wg-pw/sw 32 wiring for plug on board withswitch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification no: wg-pw/cw 33 supplying and erectingled square / circular max. 11 w down lighter/panel light having pressure die-cast aluminium housing,polystyrene diffuser havingsystem lumens output of min. 1200 lumens, min. efficacy of 110 lumen/w, cri>80, cct upto 6500k, beam angle of 120 deg., max. ripple of 5%,thd<10%, p.f. >0.95, operating range of120-270v, surge protection of 2.5 kv, life class of 50,000 hrs. at l70b50,including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. 34 supplying and erectingled square / circular max. 14 w down lighter/panel light having pressure die-cast aluminium housing,polystyrene diffuser havingsystem lumens output of min. 1500 lumens, min. efficacy of 110 lumen/w, cri>80, cct upto 6500k, beam angle of 120 deg., max. ripple of 5%,thd<10%, p.f. >0.95, operating range of120-270v, surge protection of 2.5 kv, life class of 50,000 hrs. at l70b50,including driver,having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. 35 supplying and erectingled square / circular max. 18 w down lighter/ panel light having pressure die-cast aluminium housing,polystyrene diffuser having system lumens output of min. 2000 lumens, min. efficacy of 110 lumen/w, cri>80, cct upto 6500k, beam angle of 120 deg., max. ripple of 5%,thd<10%, p.f. >0.95, operating range of120-270v, surge protection of 2.5 kv, life class of 50,000 hrs. at l70b50, including driver,having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. 36 supplying and erectingledpanel light(600mm x 600mm) max. 30 whaving crca powder coated housing,polystyrene diffuser havingsystem lumens output of min. 3600 lumens, min. efficacy of 120 lumen/w, cri>80, cct upto 6500k, beam angle of 120 deg., max. ripple of 5%,thd<10%, p.f. >0.95, operating range of120-270v, surge protection of 2.5 kv, life class of 50,000 hrs. at l70b50including driver,having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. 37 supplying and erecting anodized aluminium corridor / passage / mirror light led fitting (2 feet) max. 12wwith high transitivity diffuser with min. system lumens output of 1200 lumens, min. efficacy of 100 lumen/w, cri>80, cct upto 6000k, beam angle of 110 deg., ripple<5%,thd<10%,p.f. >0.95, operating range of200-270v, surge protection of 2 kv, life class of 50,000 hrs. at l70b50, including driver with end caps on provided pvc block / wooden board with 3 years warranty. 38 supplying & erecting inverter led batten 10w tube light fitting with polycarbonate housing, heat sink, integrated hf electronic driver, min. 2600 mah lithium ion battery with charging time of 8-10 hours and backup time of min. 3 hrs. with minimum 25% of initial watts having luminous efficacy of 100 lumen/watt,cri>80, cct of 6500k and thd<=20% havinguseful life of minimum 25000 hrs. with overheating protection with 2 years warranty. 39 supplying & erecting inverter led batten 20w tube light fitting with polycarbonate housing, heat sink, integrated hf electronic driver, min. 2600 mah lithium ion battery with charging time of 8-10 hours and backup time of min. 3 hrs. with minimum 25% of initial watts having luminous efficacy of 100 lumen/watt,cri>80, cct of 6500k and thd<=20% havinguseful life of minimum 25000 hrs. with overheating protection with 2 years warranty. 40 supplying and erecting ding dong / electronic musical type call bell with heavy duty coilsuitable to operate on 230v a.c. supply erected on polished double wooden block/sunmica block of suitable size. 41 supplying and erecting integrated led street light fitting26 to 30w ip65 & ik08 class having single piece pressure die-cast aluminium housing ,having system lumens output of min. 2600 lumens, min. efficacy of 100 lumen/w, cri>70, cct upto 6500k, thd<10%, p.f. >0.95, operating range of140-270v, inbuilt surge protection of 10 kv, life class of 50,000 hrs. at l70b50,including driver complete with 3 years warranty as per specification nofg-odf/fls2. 42 supplying and erecting integrated led street light fitting 40 to 50w ip65 & ik08 class having single piece pressure die-cast aluminium housing,havingsystem lumens output of min. 4400 lumens, min. efficacy of 110 lumen/w, cri>70, cct upto 6500k,thd<10%, p.f. >0.95, operating range of140-270v, inbuilt surge protection of 10 kv, life class of 50,000 hrs. at l70b50, including driver complete with 3 years warranty as per specification nofg-odf/fls2. 43 supplying and erecting integratedled street light fitting 100-110w ip65 & ik08 class having single piece pressure die-cast aluminium housing,havingsystem lumens output of min. 11000 lumens, min. efficacy of 110 lumen/w, cri>70, cct upto 6500k, thd<10%, p.f. >0.95, operating range of140-270v, inbuilt surge protection of 10 kv, life class of 50,000 hrs. at l70b50,including driver complete with 3 years warranty as per specification nofg-odf/fls2. 44 supplying & erecting integral post top lantern fixtures (mushroom type) suitable for led lamp upto 12 w consisting of clear acrylic top cover, cast aluminium pole cap complete with accessories on provided pole /bracket as per specification no. fg-odf/ptl 45 supplying and erecting street light wall bracket made from 40 mm. dia ‘ g.i. pipe 1.2 m. in total length complete as per specification no. fg-bkt/wb 46 supplying & erecting 3w, 230v integral type led lamp suitable for b-22 / e-27 base.(night lamp) 47 supplying and erecting regular/ standard model ceiling fan of 900 /1050 mm. sweep complete erected in position as per specification no. fg-fn/cf 48 supplying and erecting bracket fan 400 mm. sweep a. c. 230 volts 50 cycles 1350 rpm. oscillating type, plastic or metal blades chrome plated guard with speed regulator and moisture proof treatment to winding and with ‘e’ class insulation. 49 supplying and erecting fresh air cum exhaust fan of light duty 250 v a.c. 50 cycles 300mm. 1400 rpm rust proof body & blades, wire mesh, duly erected, complete. 50 supplying and erecting exhaust fan heavy duty 230 v a.c. 50 cycles 375/380 mm. 1400 rpm complete erected in position as per specification no. fg-fn/exf 51 supplying and erectingenergy saving ceiling fan 230 v a.c. 50 cycles 1200 mm complete erected in position as per specification no. fg-fn/cf 52 supplying and erecting fan hook of 10 mm. m.s. round bar grouted in rcc slab with making the site as original. 53 providing recess in brick wall suitable for erection of exhaust fan up to 450mm. sweep complete with grouting of nut, bolts, plastering and colour washing to match the colour of the wall for the wall thickness of 225 mm. 54 supplying & erecting 22 swg g.i sheet metal cawl sector shaped with 25 x 25 x 3 (mm) angle iron frame, metal mesh to avoid birds entry with necessary material, suitable for exhaust fan of 400 mm as per specification no fg-fas/msc 55 supplying and erecting midget type 3.0 litres instant type water heater of rustproof & shockproof abs plastic body, high grade ss inner tank & 3kw heating element with corrosion & hard water protection, with minimum 3 safety protections (i.e. thermostat & thermalcut-out, function valve) complete with 6.5 bar pressure withstanding capacity 230/250v, 50hz, a.c. supply with inlet and outlet, with 3 core pvc flexible copper wire leads duly tested and marking sr. no. and date of erection complete. 56 supplying and erecting chromium plated heavy duty brass stop cock for inlet pipe of water heater (15mm. dia). 57 supplying & erecting 15mm brass non return valve for inlet pipe of storage water heater. 58 providing fiber reinforced pvc flexible pipe upto 1m length with brass locking nuts and washers and clips at both ends suitable for hot water and cold water both (1 set of 2 nos.) complete. 59 supplying, installing, testing & commissioning split type variable speed invertertechnology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.3tr to 1.6tr capacity having iseer minimum 3.8 to maximum 4.39 suitable to operate on 250v, 50 hz, a.c. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant r32 having copper condenser, minimum 2.5pm filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dba at position as per specification no. apac/ wac 60 supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.7tr to 2.0tr capacity having iseer minimum 3.8 to maximum 4.39 suitable to operate on 250v, 50 hz, a.c. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant r32 having copper condenser, minimum 2.5pm filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dba at position as per specification no. apac/ wac 61 supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with rohs compliant suitable for refrigerant having 22swg thickness and inner dia/size 12mm complete. 62 supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with rohs compliant suitable for refrigeranthaving 22swg thickness and inner dia/size 16mm complete. 63 supplying, erecting, testing and commissioning self contained water cooler 230/250v 50hz nominal cooling capacity of 80 litres per hour and storage capacity 120 litres with partially stainless steel body as per specification no. ap-wcr/wc 64 supplying, erecting, testing and commissioning self contained water cooler 230/250v 50hz nominal cooling capacity of 150 litres per hour and storage capacity 150 litres with partially stainless steel body as per specification no. ap-wcr/wc 65 supplying and erecting ultra violet storage type water purifier (ro+uv+uf) with softener for safe drinking water consisting of uv germicidal tube of 8w capacity choke made of copper wire and two indicator lamps with output of purified water minimum 0.33 litre/min with activated carbon filter and softener operating on 230v, single phase a.c. supply with uv fail & filter change indication system .(for tds more than 200) 66 supplying, installing, testing and commissioning of single phase, 230v, 50 hz, 1400 to 1600va digital pure sine waveinverter with backup time of ........ hrs. based on insulated gate bipolar transistor (igbt) technology completeas per specification no.ap-inv 67 supplying and erecting 12v/180ah tubular battery with battery terminal wire, duly charged with 36 months warranty complete 68 supplying and erecting fully automatic line voltage stabilizer buck and boost type for operation on input voltage 160-270v and output voltage 200-250v rated for 3kva maximum load and with voltmeter, selector switch, 6a/16a flush type 3 pin socket for output and with 3 core copper flexible cord and 3 pin 6/16a plug top with overload & short circuit protection complete. 69 supplying and erecting switch disconnector fuse (sdf) switch 415v, 100a,open execution, four poleac23 a rated with terminal shrouds on both sides and phase barriers along with telescopic shaft for depth adjustments and door interlock and padlock complying to is/iec 60947-3 part-1/3hrc - din type fuse, insulation voltage 1000 vfor enclosing in panel with rotary handle for on / off operation (without hrc fuse) 70 supplying & erecting three phase, 415v, street light control panel up to the max load of 6kw, tpn mcb 40a,powder coated crca 14 swg sheet, outdoor type, having ip54,ik10 protection, suitable rating contactor, 24 hrs. astronomical time switch with minimum 5 years battery back up,auto/manual selector switch, on/off push buttons, indicator lamps, control wiring, metering device, etc. for automatic operation, with overcurrent, short circuit, earth fault protectionon provided iron frame / cc foundation. 71 supplying, erecting & marking spmcb 0.5a to 5a, c-series with rated short - circuit breaking capacity (icn) 10kain provided distribution board as per specification no. sw-swr/mcb 72 supplying, erecting & marking spmcb 6a to 32a, c-serieswith rated short - circuit breaking capacity (icn) 10ka in provided distribution board as per specification no. sw-swr/mcb 73 supplying, erecting & marking spmcb 6a to 32a, b-series with rated short - circuit breaking capacity (icn) 10ka in provided distribution board as per specification no. sw-swr/mcb 74 supplying, erecting & marking dpmcb 6 a to 32 a, b-series with rated short - circuit breaking capacity (icn) 10ka in provided distribution board as per specification no. sw-swr/mcb 75 supplying, erecting & marking tpmcb 6a to 32a, with rated short - circuit breaking capacity (icn) 10ka in provided distribution board as per specification no. sw-swr/mcb 76 supplying, erecting & marking tpmcb 40a to 63a, with rated short - circuit breaking capacity (icn) 10ka in provided distribution board as per specification no. sw-swr/mcb 77 supplying, erectingand marking double pole isolator only switch version of miniature circuit breakerof40awith required wiring connections and lugs etc. in provided distribution board. 78 supplying, erecting and markingfour pole isolators only switch version of miniature circuit breakers of 40a in provided distribution board. 79 supplying, erecting and markingfour pole isolators only switch version of miniature circuit breakers of 63ain provided distribution board. 80 supplying&erectingtriplepole and neutral distribution board (tpndb), sp/tp mcbs total 4 ways /12 poles, with door, 1.2mm thickness surface/flushmounted, ip 43 protection on iron/gi frame (vertical busbar type) as per specification no. sw-swr/mcbdb 81 supplyingand erecting single pole and neutral distributionboard (spndb), with 2 ways for incoming and 6 ways (6 poles) for outgoing sp mcbs, with door, 1.2mm thickness surface / flush mounted, ip 43 protection on iron / gi frame as per specification no. sw-swr/mcbdb 82 supplying & erecting crca sheet metal one way enclosures of 1.2mm thickness suitable for dp mcb /tp mcb/fp mcb/rccb/rcbo complete erected on angle iron/gi frame. 83 supplying & erecting triple pole and neutral distribution board (tpndb), 3 pole/4 pole mccb as incomer & outgoing sp mcb (36 poles) or tp mcb of 12 ways (36 poles), with door, 1.2mm thickness, surface/flush mounted, on iron/gi frame (vertical busbar type) as per specification no. sw-swr/mcbdb1 84 providing & erecting 4 pole mccb, 415 v, 100a, rated short-circuit breaking capacity 25 ka (ics=100% of icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/uv/trip alarm contact.mccb with phase barriers on both sides, insulation withstand capacity 800v, no line-load bias in provided enclosure/panel as per specification no. sw-swr/mccb (rate of 3 pole mccb +20% for 4 pole mccb= 5309x20%+5309=6370.80) 85 supplying and erecting cupboard for enclosing switchgears orforany other purposemadefromselected marine plywood planks 19 mm thick duly varnished/ painted from inside and from outside with brass hinges and locking arrangement with suitable lock with keys in duplicate. cupboard shall be duly grouted with suitable size of iron work in wall at the bottom. (size of cupboard 0.5x1x2+0.5x1x2+1x1x2= 4 sq.mtrs.) 86 supplyinganderectingiron, sheet metal work consisting of crcasheets, varioussectionsofiron,plates, chequeredplates,rods,bars,mspipes,etc. forpanel board or any other purpose with bending, cutting, drilling and welding completeerectedatthepositionwith necessarymaterialsdulypaintedwith one coat of red oxide and two coats of enamelpaint to match the switchgears or as per directions by the authority. ( 50x50x4mm angle @ 3.4 kgs x 6 mtrs.= 20.40 kgs i,e 20 kgs. 87 supplying and erecting 525 v 3 phase, 50 hz., mpp type capacitor having minimum overcurrent capacity of 1.8 in,peak inrush current capacity 300 inand minimum life 150000 hourskvarbank of all polypropylenecondensers (app)withthestandard capacities of 2, 3, 5, 7, 10, 12.5 and 15 kvarunitsofp.f. correctionforoperationon 3 phase 50 hz. with externally discharging resistances, earthing terminals and built on angle iron or channel iron frame work and providedwithterminalcoverbox completeerected onprovidediron bracketoronfloordulytestedby licensee.( original p.f=0.8 desired p.f = 0.95 for this multiplying factor is 0.421. so 0.421 x 46.440 = 19.55 i.e 10 kvar x 2= 20 kvar) 88 supplying, erecting & terminating fr xlpe insulated, galvanised steel formed wire armoured (strip) cable 1100 v, 2 core 6sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. cb-lt/al 89 supplying, erecting & terminatingfr xlpe insulated, galvanised steel formed wire armoured (strip) cable 1100 v, 3½ core50 sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. cb-lt/al (double run) 90 supplying, erecting & terminatingfr xlpe insulated, galvanised steel formed wire armoured (strip) cable 1100 v, 4 core6sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. cb-lt/al 91 supplying & erecting g.i. pipe‘a’ class 50 mmdia.erectedfor enclosingxlpearmouredcable on wall/poleas per specification no. cb-ce 92 supplying andlaying (including excavation of suitable width & depth up to 90 cm) 50 mmoutside dia. double wall corrugatedpipes(dwc) ofhdpe for enclosing cable below ground/road surface, to required depth complete. 93 supplying and laying (including excavation of suitable width & depth up to 90 cm) 75 mmoutside dia. double wall corrugatedpipes (dwc) ofhdpe for enclosing cable below ground/road surface, to required depth complete. 94 supplying & erectingcast iron cable indicatorplate buried along with route of cable for pvc / xlpe armoured cableas per specification no. cb-cip 95 supplying & erecting frp box of size 150mm x 125mm x 100 mm, 2.7 mm thickcomplete on pole/wallas per specification no. cb-sb 96 providing & erecting 8 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 135 mm a/f, top 70 mm a/f on provided foundation as per specification no. oh-pl/opl 97 providing and erecting galvanised 1000mm single arm sword type bracket with frp dome and ball as per specification no. oh-pl/pbkt 98 providing and erecting galvanised 1000mm double arm sword type bracket with frp dome and ball as per specification no. oh-pl/pbkt 99 providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results asper specification no. ea-ep 100 providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results asper specification no. ea-ep 101 providingpipetype earthing with 40mm. dia. g.i. pipe or 20 mm dia. g.i. rodcomplete with all materials testing and recording the results as per specification no. ea-ep 102 supplying and erecting gi strip of required size used for earthing on wall and/or any other purpose with necessary gi clampsfixed on wall painted with insulating and non-corrosive bond with requiredjointsas per specification no. ea-ep.(25x3mm strip. perpole 1.5 mtrs. so for 13 poles 13nos.x1.5mtrs.= 19.5 mtrs. weight of strip @0.590kgs/mtr. so 19.50mtrs.x0.590kgs.=11.51 kgs.) 103 supplying and erecting minimum three & above star rated 1 phase, 230 v, 50 hz, submersible pump set of 1.5 kw/2hp suitable for erection on open well, pump having delivery head from 29to 7 m and discharge from 30 to 600 litres. . per minute& pipe of suction 50 mm/delivery 50 mm diameter erected with necessary h type clamps as per specification no. wp-osp 104 supplying & erecting flat flexible 3 core 4 sq.mm pvc sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete. 105 supplying & erecting automatic control panel for 1 ph, 230 volt, a.c. submersible/centrifugal pump set up to 3 hp consisting of dol starter of suitable relay range s.p.p., combined ammeter/ voltmeter, phase indicating lamp enclosed in crca powder coated vibration proof enclosure with ip 54 protection. 106 supplying & erecting carbon dioxide (co2) fire extinguisher of 4.5 kg. capacity cartridge type conform to is 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. m. s. flat with nut & bolts routed in wall complete. 107 making cement concretefoundationin 1:3:6 cement concrete,(20 to 25) mm. stone metal duly plastered with necessary curing forcomplete. (02x02x02 foundation for main control panel stand and for street light control panel 0.2x0.2x0.2mtr.=0.16 cu.mtrs.) 108 makingm- 20 grade reinforced cement concretefoundation by considering the safe soil bearing capacity at site as 10 t/sq.mat 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical gi pole). 109 supplying and erecting isi mark gi pipe 50 mm dia.‘b’ class at position with accessories complete as per specification no. cw-plb/gp. 110 supplying and erecting high density polythene pipe isi mark 50 mm. dia. suitable for pressure of 6 kg. / cm2 connected tojet/submersible pump with required material complete. 111 supplying and erecting 50 mm dia. gun metal sluice valve at position with necessary materials complete. 112 supplying and erecting non return valve 50 mm dia in position made of gun metal complete. 113 lum sump provision towards service connection charges1 no.3 phase @ rs. 55000/-/per total rs.55,000/-

Central Government/Public Sector

TRN :34404877 | 12 May, 2025

Tender Value : 0

Chennai - Tamil Nadu

Tender for gem bids for single punch , double punch , stapler small , stapler big , ball pen blue , ball pen black , ball pen red , pilot pen blue , pilot pen black , eraser , sharpener , pencil , scale plastic , scale steel , highlighter , white board marker blue , white board marker black , white board marker red , white board marker green , permanent marker blue , permanent marker black , permanent marker red , permanent marker green , sketch pen , cd marker black , cd marker blue , gum bottle 250 ml , binder clip small , binder clip big , fevicol tube 50 gm , fevistick , scissor big , scissor small , paper clip , note pad , notice board duster , thump pin , stamp pad , magnetic buttons , stamp ink 60 ml , paper cutter , correction pen , hand note book , notice board ribbon , case file tag , fevi quick , box folder , ring folder , writing pad , white chart big , photo paper , leaf folder 40 leaf

Central Government And Public Sector

TRN :34396610 | 12 May, 2025

Tender Value : 2.34 Lacs

Kullu - Himachal Pradesh

Tender for gem bids for 42 push button pendant with 12 push buttons 10a 500v along with cable gravity limit switch for mh ah and monorail for eot phep iii brake shoe with liner for 160mm dia dcem brake brake shoe with liner for brake drum 160 mm electro hyd thruster brake mdt 160-18 brake shoe with liner for 400mm dia dcem brake brake shoe with liner for 400mm dia eht brake mdt 400-46 brake shoe with liner for brake drum 200 mm electro hyd thruster brake mdt 200-18 brake shoe for 200dia l.t. brake drum -dc electro-magnetic type brake shoe 250mm dia for thruster

Related Searched Keywords : buttons

List of buttons Tenders

Tender for providing and erecting highmast, led streetlight/ floodlight, pole, pole box, pole bracket, dismantling old led streetlight, mcbs, push buttons, etc. and other electrical works at thebi irrigation scheme. (dist. : amreli)

Get buttons Tender Alert...

Related Searched Keywords : buttons

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us