Filters

List of boundary-work Tenders

List of latest boundary-work Tenders in Indian Tenders. Click on any boundary-work Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for boundary-work Tenders.

All-Tenders (1298)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :49053581 | 16 May, 2025

Tender Value : 9.95 Crore

Samba - Jammu And Kashmir

Tender for tender for providing architectural, and structural consultancy services for the work namely construction of new degree college at gdc ghagwal including (design of b/wall, master plan, culvert design etc).

State Government

TRN :49053588 | 23 May, 2025

Tender Value : 16.45 Lacs

Villupuram - Tamil Nadu

Tender for tender for construction of angnawadi building at vadughapoondiin melmalayaur block; 1 construction of anganwadi building@ mettuvailamur in melvailamur panchayat 2 earth work excavation for foundation in all classes of soils and sub soil to full depthexcept in hard rock requiring blasting but inclusive of shoring struttingif required forthe sides of foundation. 3 supplying and filling in foundation and basement with good sand in layers not more 15 cm thick including ramming, watering and compacting etc.complete complying to standard specification 4 cement concrete 1:4:8 mix using 40 mm hbg metal for foundaion including watering wherever necessary and laid in layers of not more than 15cm thick. compacting etc., complete complying with standard specifications and as directed. 5 brick work in cm 1:5 mix using country bricks ground moulded of size 23 x 11 x 7 cm for the following including curing etc., complete complying with standard specifications. 6 supplying and fabricating and placing in position ms steel or ribbed for steel for all reinforced cement concrete works as per the design given including cost of steel and blinding wire all floors etc., complete complying with standard specification. 7 supplying and erection centering for sides and soffiots including necessaary supports and strutting as directed by the departmental officers. rate for 10m2 for the following items (rcc floor slab, roff slab, rectangular / square, tee/ ell beams, lintels, 8 bgl 9 agl 10 reinforced cement concrete 1; 11/2;3 using 20mm iss hbg metal including the cost and conveyance of all meterials and cost of all labour charges etc complete 11 plastering cm 1;4 -20mm thick including the cost and conveyance of all materials and cost of all labour charges etc., complete. 12 finishing the top of roof with one course of solar reflective tiles cm laid incement mortor 1 : 3 mix and pointingwith the same mortor mixed with water proof compoundincluding cost conveyance of all materials and labour charges etc complete 13 providing scratch proof ceramic tiles including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc, complete. 14 dadooing the walls with glazed tiles including the cost and conveyance of all materials and cost of all labour charges etc., complete 15 flooring using 2 x 2 vitrified tiles approved and pointing with same colourincluding cost and conveyance of all materials to site and all labour charges etc complete 16 granolithic flooring using 10 - 12mm chips including cost and conveyance of all materials to site and all labour charges etc complete 17 ceiling plastering with cement mortar 1:3 mixto 10 mm thick for r.c.c. items including cost and conveyance of all materials to site and all labour charges etc complete 18 plastering cm 1;5 -12mm thick including the cost and conveyance of all materials and cost of all labour charges etc., complete. 19 distempering two coat using oil bound distemper including cost of distemper and labour charges, etc, complete. 20 painting two coat approved cement paint over the plastered surface including cost and all other charges etc., 21 painting two coat enamel paint over the new iron work surface including cost and all other charges etc., 22 supply of steel doors and windows 23 door0.90x2.10 m 24 door0.75x1.20 m 25 door1.10 x 2.10 m 26 window1.20 x 1.300 m 27 vernilator 0.90x0.45 28 supply and fixing of cuddappa slab including cost and conveyance of cuddappa slab and labour charges for fixing etc, complete. 29 cost and supply of rcc jolley 30 provision for rain water arrangements 31 supply and fixing baby watercloset with p- trap 32 supply and fixing european water closet with all accesoories 33 providing following electrification items 34 provision for labour charges fixing door and window 35 provision for sanitary arrangement 36 provision for rain water structure 37 citizen information board 38 gst amount for providing service to government contract works for the above construction works. { gst amount is the total gst amount for total overall quoted amount above this row in column bb for all works in this package}

Local Bodies

TRN :49053674 | 19 May, 2025

Tender Value : 0

Nagercoil - Tamil Nadu

Tender for nagercoil corporation providing drain wall raising work at cbh road in ward no.11

State Government

TRN :49053724 | 13 May, 2025

Tender Value : 6.47 Lacs

Kinathukadavu - Tamil Nadu

Tender for tender for construction of compound wall in mayanam at no10muthur ho no10muthur panchayat

State Government

TRN :49053759 | 27 May, 2025

Tender Value : 11.40 Lacs

Lucknow - Uttar Pradesh

Tender for tender for construction of new boundary wall, barbed wire fencing and painting, in place of damaged boundary wall situated behind block no.1 to 3 of type-4 residences of government colony sector-d jankipuram lucknow

corporations/Associations/Others

TRN :49053763 | 22 May, 2025

Tender Value : 0

Thiruvallur - Tamil Nadu

Tender for supply of sbv/ poppet valve for water wall soot blowers of model wb-1e for boilers of unit-ii , supply of sbv/poppet valve (head assembly) for water wall soot blowers of model wb-1e for boilers of unit-ii drawing-1 sheet

State Government

TRN :49053791 | 14 May, 2025

Tender Value : 1.75 Lacs

Kallakurichi - Tamil Nadu

Tender for tender for providing of paver block keel street length of the road 30 in meter width of the road 3.00 in meter. at kalliparai habitation in kilakadu panchayat.; 1 providing of paver blockkeel street length of the road 30 in meter width of the road 3.00 in meter. at kalliparai habitation in kilakadupanchayat 2 cc pavementearthwork excavation and depositing on bank with initial lead and liftin all type of soil except hard rock requiring blasting as per ss 20 b for kerb wall foundation 3 cost and labour for centering works including all cost andconveyance and all labour charge etc,complete 4 plain cement concrete1:4:8mix using 40mm hbg metal including all cost andconveyance and all labour charge etc,complete 5 plaincement concrete 1:2:4 mix 20mm hbg iss metal including all cost andconveyance and all labour charge etc , complete 6 construction of granular sub base by providing well graded material (25 mm to 4.75 mm irc hbg metal @ 65 %,4.75 to 2.36mm irc hbg metal@20%&2.36 mm below irc hbg metal @15%) including cost and conveyance and materials and labour charges etc,..completed. 7 flooring with paver laid with 80mm thick including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete 8 provision for name board 9 provision for photographic charges

State Government

TRN :49053871 | 14 May, 2025

Tender Value : 0

Anantnag - Jammu And Kashmir

Tender for stage contract for sub division anantnag.- stage contract anantnag sub division. 2 engagements of jcbfor execuation of works of various natures 3 surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -all kinds of soil 4 earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed,( all kinds of soil) 5 earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by engineer-in-charge. all kinds of soil : 6 earth work in excavation by manualmeans in trenches for foundations, drains, pipes, cables etc .upto required depth ) and for shafts, wells, cesspits including dressing of sides and ramming of bottoms , including getting out excavated earth and disposal of surplus excavated earth as directed,( all kinds of soil) 7 supply and filling of rbm of specified size including spreading, watering, ramming, compacting with prr of 8 to 10 tonne capacity and including carriage of the same from approved source upto site of work complete 8 felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunk and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. 9 beyond 30 cm girth upto and including 60 cm girth. 10 beyond 60 cm girth upto and including 120 cm girth. 11 beyond 120 cm girth upto and including 240 cm girth. 12 banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with 1/2 tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc., lead upto 50 m and lift upto 1.5 m in all kinds of soi 13 supply and filling of khak bajri including spreading, watering, ramming, compacting with prr of 8 to 10 tonne capacityincluding carriage of the same from approved source upto site of work complete( for berm) 14 providing / laying of rcc pipes in proper position/ grade including cutting of road surface upto required depth, providing requisite cushion including carriage ofall materials and pipesupto site ofwork complete. 15 10 16 12 17 14 18 16 19 20 20 24 21 32 22 36 23 40 24 48 25 providing / laying of ms pipes in proper position/ grade including cutting of road surface upto required depth, providing requisite cushion including carriage ofall materials and pipesupto site ofwork complete. 26 6 27 8 28 10 29 12 30 scarifying the existing bituminous road surface to a depth of 50mm and disposal of scarified material within all lifts and lead upto 1 km (by mechanical means). 31 scarifying metalled (water-bound) road surface including disposal of rubbish lead upto 50m and consolidation of the aggregate received from scarifying with power road roller of 8 to 10 tonne capacity. 32 providing and laying water bound macadam base course with quarry crushed stone aggregate 90 to 45mm size, stone screening 13.20mm size and binding material as per morth specification including screening, sorting, spreading to template and consolidation with prr of 8 to 10 tonne capacity including carriageofquarry crushedstone aggrregateand stone screeing, stone dustfrom approved soucrce upto site of wotk complete(finished work to be measured) 100mm compacted thickness 33 providing and laying water bound macadam base course with quarry crushed stone aggregate 63 to 45mm size, stone screening 13.20mm size and binding material as per morth specification including screening, sorting, spreading to template and consolidation with prr of 8 to 10 tonne capacity including carriageofquarry crushedstone aggrregateand stone screeing, stone dustfrom approved soucrce upto site of wotk complete(finished work to be measured) 75mm compacted thickness 34 providing and laying water bound macadam base course with quarry crushed stone aggregate 53 to 22.4mm size, stone screening 11.20mm size and binding material as per morth specification including screening, sorting, spreading to template and consolidation with prr of 8 to 10 tonne capacity including carriageofquarry crushedstone aggrregateand stone screeing, stone dustfrom approved soucrce upto site of wotk complete(finished work to be measured) 75mm compacted thickness 35 providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (wmm) specification including premixing the material with water at omc in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of engineer-in-charge 36 providing and applying tack coat using hot straight run bitumen of grade –vg-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications. on bitumen surface @ 0.50 kg/sqm 37 providing and applying tack coat using hot straight run bitumen of grade –vg-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications. on w.b.m. @ 0.75 kg/sqm 38 providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of engineer-in-charge. 50 to 100 mm average compacted thickness with bitumen of grade vg-10 @ 3.5% (percentage by weight of total mix) 39 providing and laying semi- dense bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of engineer-in-charge. 25 mm compacted thickness with bitumen of grade vg 10 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of aggregate) 40 providing and laying dense graded bituminous macadam using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of engineer-in-charge. 16.62.1 50 to 100 mm average compacted thickness with bitumen of grade vg-30 @5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of aggregate) prepared in batch type hot mix plant of 100-120 tph capacity. 16.62.2 50 to 100 mm average compacted thickness with bitumen of grade vg-30 @5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of aggregate) prepared in drum type hot mix plant of 60-90 tph capacity. 41 providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade vg-10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road all complete. 42 providing and laying of stone soling, hand packed, including carriage of same from approved source upto site of work complete. 43 providing and laying in position cement concrete in1 : 4 : 8 (1 cement :4 coarse sand : 8 graded crushed stone aggregate, 40mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete. 44 providing and laying in position cement concrete in1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate, 40mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete. 45 providing and laying in position cement concrete in1 : 2 : 4 (1 cement :2 coarse sand : 4 graded crushed stone aggregate, 20mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete. 46 providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. but including carriage of all materials from approved sources up to site of work complete.all works upto plinth level (1: 1.5 : 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) 47 providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. but including carriage of all materials from approved sources up to site of work complete.all works upto plinth level (1 : 2 : 4 (1 cement :2 coarse sand : 4 graded crushed stone aggregate, 20mm nominal size)) 48 reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.but including carriage of all materials from approved sources up to site of work complete. (1: 1.5 : 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) 49 reinforcement for rcc work including straightening cutting, bending, placing in position and binding all complete (thermo mechanically treated bars) including all carriages complete. fe-500 d or more 50 providing / fixing of necessary farm work / shuttering including strutting, propping etc and removal of same complete 51 foundations, footings, bases for columns 52 return walls, walls (any thickness) including attached pilaster buttresses, plinth and string course fillets, kerbs and steps etc. 53 suspended floors, roofings, landings, balcones and access plateform 54 50mm thick cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished wit a floating coat of neat cement including carriage of all materials from approved sources upto site of work complete 55 40mm thick cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished wit a floating coat of neat cement including carriage of all materials from approved sources upto site of work complete 56 25mm thick cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished wit a floating coat of neat cement including carriage of all materials from approved sources upto site of work complete 57 12mm cement plaster of mix 1:4 (1cement: 4 fine sand) including all carriages complete. 58 12mm cement plaster of mix 1:6 (1cement: 6 fine sand) including all carriages complete. 59 15mm cement plaster of mix 1:4 (1cement: 4 fine sand) including all carriages complete. 60 15mm cement plaster of mix 1:6 (1cement: 6 fine sand) including all carriages complete. 61 dry random rubble masonry in 100 x100mm mesh size g.i wire crate made of 5mm dia g.i wire using bond stones ncluding wrapping /tightening of wire crate and binding wire crates after stone work including cost of all material involed (crates and stones) and carriage of same upto site work complete (quarry stones) 62 random rubble masonry with hard stone (quarry) in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement : 6 coarsesand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: cement mortar 1:6 (1 cement : 6 coarse sand) including carriage of all materials from approved sources up to site of work complete. 63 engagement of labour /masdoor for one day 64 engagement of skilled labour with all machinary like cutters , axe etc for purning of the trees 65 pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. 66 removal of unhygienic materials (so classified by the site engineer) from designated sites and its disposal as per directions, all inclusive 67 clearance of slipsdisposal lead upto 50 m and lift upto 1.5 m. 68 in ordinary soils disposal lead upto 50 m and lift upto 1.5 m. 69 in soils; mixed with moorum/kankar/shingle/boulders; disposal lead upto 50 m and lift upto 1.5 m. 70 in soils; mixed with decomposed rocks; by blasting or any other means 71 providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/colour using hot thermoplastic material by fully/semiautomatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, t&p, cleaning the road surface of all dirt, seals, oil, grease and foreignmaterial etc. complete as per direction of engineer-in-charge and accordance with applicable specifications. 72 white washing with lime to give an even shade :old work (two or more coats) 73 white washing with lime to give an even shade :old work (one or more coats) 74 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work 75 painting road surface marking with adequate no. of coats to give uniform finish with read mixed road marking paint conforming to is: 164, on bituminous surface in white/yellow shade including cleaning the surface of all dirt, scales, oil, grease and foreign material etc. complete.old work ( one or more coats) 76 providing and laying at or near ground level factory made kerb stone of m-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of the joints except at sharp curve shall not to be more than 5mm) including making drainage opening wherever required complete etc. as per direction of engineer-incharge (length of finished kerb edging shall be measured for payment). (precast c.c. kerb stone shall be approved by engineer-in-charge). 77 manufacturing supplying and fixing retro reflective sign boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type-iv of astm-d-4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per irc : 67-2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of astm-d-4956-01 and fixing the same with suitable sized aluminum alloy rivets @ 20cm c/c to back support frame of m.s. angle iron of size 25x25x3mm along with theft resistant measures mounted and fixed with 2 nos. m.s. angles of size 35x35x5mm to a vertical post made upto m.s. tee section ismt 50x50x6mm welded with 16.0 (road work) 224 base plate of size 100x100x5mm at the bottom end and including making holes in pipes, angle flats, providing and fixing m.s. message plate of required size steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical m.s.-tee support to be painted in black and white colours). backside of aluminum sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coats including all leads and lifts etc. complete as per drawing, specification and direction of engineer-in-charge. 16.66.1 mandatory/regulatory sign boards of 900 mm diameter with part as length of 3750 mm. 78 structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete 79 structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. welded 80 supply and filling of rbm of specified grade including spreading, watering, ramming, compacting with prr of 8 to 10 tonne capacity material availabe at site

State Government

TRN :49054028 | 30 May, 2025

Tender Value : 36.10 Lacs

Gaya - Bihar

Tender for tender for construction of new boundary wall (length-229.00 m) and r&m (length-30.00 m) for extension of trw barun, aurangabad

State Government

TRN :49054033 | 15 May, 2025

Tender Value : 0

Challakere - Karnataka

Tender for supply of materials for construction of bhoojanalaya to govt. primary school at mitlakatte village in challakere taluk - mtk add hom of welding and grinding machine at 2% on material,mtk tools & plants and electrical charges at 2%,miscellaneous /contingencies charges,display board or cib,mtk add white lead paint, gasket, cement, sand for making good the wall and floor at 2% on material,mtk licenced plumber with tools,mtk lead or pvc connection pipe 32mm dia (for wash basin),mtk c.i. m.s. brackets for flushing cistern,mtk brass stop cock,mtk cp brass waste 32 mm of standard pattern,mtk cp brass chain with plug,mtk copper plated brass piller tap 15mm,mtk white vitreous china clay flat back wash basin size 630x450mm,mtk handling loading and unloading 3% on material,mtk labour charges for lifting and placing in position and making connection at 7% on material,mtk polyenthylene water storage tank of specified capacity l,mtk vitrified tiles 600x600 mm,mtk fabricator,mtk add 15% wastage for glass,mtk 5.50 mm thick plain glass,mtk chrominum plated screws,mtk cleat angles,mtk alluminium handles - 15 mm,mtk alluminium tower bolt - 20 cm,mtk pvc beading,mtk rubber beading for shutters beading,mtk nylon rollers,mtk aluminium window frame section 1.20 mm thick,mtk binding wire,mtk tmt bars fe 500,mtk add brush, putty, glue at 5% on cost of paint,mtk whitening,mtk dry distemper,mtk unit cost as per the specification,mtk add brush at 1% on cost of paint,mtk enamel metal paint,mtk painter class i,mtk add wire brush, fine steel wool, putty, sand paper, at 3% on cost of paint,mtk ready mix primer paint (ready mix red lead paint),mtk hom of cutting and grinding machine,mtk add,mtk hom of welding and grinding machine,mtk welder grade i,mtk corbon electrodes,mtk anchor bolts 750mm,mtk base plate / base plate,mtk gusset plates 6 mm thick,mtk ms angle iron 40mm x 40mm x 6mm, 23 metre in length at 3.5 kg per metre,mtk ms angle iron 50mm x 50mm x 6mm, 33.8 metre in length at 4.5 kg per metre,mtk add providing and removing scaffolding at 3% on labour,mtk hom of vibrator 0.71 days,mtk plasticizer / super plasticizer,mtk add handling , loading and unloading at 1% on material,mtk solid concrete blocks (40 x 15 x 20 cms)-4.00 n/sqmm,mtk add watering charges at 1 % on labour,mtk stone chistler class ii,mtk mason class ii (with tools),mtk mason class i (with tools),mtk mixer (concrete small used in culvert),mtk boulders,mtk bond stone 20 x 20 x 45 cm,mtk size stone 20 x 20 x 25 cms,mtk add handling , loading and unloading at 2% on material,mtk casurina poles 100 - 150 mm,mtk silver oak or equivalent planks 38 mm thick,mtk add watering charges at 1 % on material,mtk mixer (concrete) - 1 cum capacity,mtk portland cement,mtk coarse sand (zone iii),mtk broken stone aggregate 12 mm to 10 mm size,mtk broken stone aggregate 20 mm size,mtk broken stone aggregate 40 mm size

Related Searched Keywords : boundary work

List of boundary-work Tenders

Tender for tender for providing architectural, and structural consultancy services for the work namely construction of new degree college at gdc ghagwal including (design of b/wall, master plan, culvert design etc).

Tender for nagercoil corporation providing drain wall raising work at cbh road in ward no.11

Tender for tender for construction of compound wall in mayanam at no10muthur ho no10muthur panchayat

Tender for tender for construction of new boundary wall, barbed wire fencing and painting, in place of damaged boundary wall situated behind block no.1 to 3 of type-4 residences of government colony sector-d jankipuram lucknow

Tender for supply of sbv/ poppet valve for water wall soot blowers of model wb-1e for boilers of unit-ii , supply of sbv/poppet valve (head assembly) for water wall soot blowers of model wb-1e for boilers of unit-ii drawing-1 sheet

Tender for tender for construction of new boundary wall (length-229.00 m) and r&m (length-30.00 m) for extension of trw barun, aurangabad

Get boundary work Tender Alert...

Related Searched Keywords : boundary work

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us