Filters

List of aluminum-ventilator Tenders

List of latest aluminum-ventilator Tenders in Indian Tenders. Click on any aluminum-ventilator Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for aluminum-ventilator Tenders.

All-Tenders (1)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :28159327 | 13 Jun, 2023

Tender Value : 17.07 Lacs

Jamshedpur - Jharkhand

Tender for annual civil maintenance work of turamdih mines - earthwork in excavation in the following types of soil and rock up to and including 1.5 mtr. lead including bailing or pumping out any water accumulating inside the excavated pit or trench shoring strutting adequate protection to be taken during excavation transporting the excavated soil for all lead stacking selectively including disposing off the rubbish rock fragments excess spoils etc. lead upto 100 mtrs. in the area as directed by the engineer all complete as per drawing, specification and direction of the engineer. .earth work in back filling with available earth including watering and compaction at all elevations around foundations walls wells tunnels pitsculverts trenches road approaches and in plinth filling and area filling as per specifications and drawings and as directed by the engineer with selected spoil within a lead of 100 mtr..disposal carriage of rubbish waste rock earth etc.dumped stacked at site by mechanical means including loading unloading and dressing properly lead upto 5 km. and up to any lift includind cost of all labours and equipments. .surface dressing of the ground in all kinds of soil including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish lead up to 50 m and lift up to 1.5 m..supply mix place in position compact cure cement concrete 1 cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size below foundations walls wells pits trenches etc. and in basin lining as per specifications drawings and directions of the engineer and including cost of centring and shuttering but excluding cost of cement..supply mix place in position compact and cure including testing of concrete specimens finishing surfaces as per specifications drawings and directions of the engineer of the following grades of concrete with 20mm and down graded stone aggregate and coarse sand in super structure or any level excluding cost of centring and shuttering cement and reinforcement. m20 rcc pcc.taking delivery from store or departmental yard bend bind and place the following types of reinforcement in all types of reinforced concrete work at all elevations including cleaning straightening cutting bending and binding with 18 swg annealed wire or with welding such as tack lap butt etc with approved electrodes providing concrete cover blocks pin chairsnails supports of reinforcement etc. with all materials and labour complete as per drawings specifications and directions of engineer excluding cost of reinforcement. .install dismantle and remove the form work of approved quality including splay recess corners haunch etc. scaffolding necessary rendering of concrete surfaces after exposure including cost of all material and labours at all elevations. .supply and laying in position brick work with designate 75 bricks in super structure etc in cement coarse sand mortar 1 isto 6 including mixing mortar laying bricks raking joints curing etc complete with all materials and labour as per drawings and specifications excluding cost of cement. .providing and fixing 125 into 63 mm m. s. hinges of approved quality and make..providing and fixing isi marked anodised aluminium tower bolt black finish barrel type with necessary screws etc. complete 300 into 10 mm.providing and fixing isi marked anodised aluminium tower bolt black finish barrel type with necessary screws etc. complete 150 into10 mm.providing and fixing bright finished brass hanging type floor door stopper with necessary screws etc. complete..providing and fixing aluminium extruded section body tubular type universal hydraulic door closer having brand logo with is 3564 embossed on the body door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm with double speed adjustment with necessary accessories and screws etc. complete..providing and fixing aluminium handles isi marked anodised anodic coating not less than grade ac 10 as per is 1868 transparent or dyed to required colour or shade with necessary screws etc. complete 125 mm..providing and fixing aluminium sliding door bolts isi marked anodised anodic coating not less than grade ac 10 as per is 1868 transparent or dyed to required colour or shade with nuts and screws etc. complete 300x16 mm.cement concrete flooring 1 cement 2 coarse sand 4 graded stone aggregate finished with a floating coat of neat cement including cement slurry but excluding the cost of nosing of steps etc. complete as per direction of eic excluding cost of cement. 40 mm thick with 20 mm nominal size stone aggregate.grading roof for water proofing treatment with cement concrete 1 cement 2 coarse sand 4 graded stone aggregate 20 mm nominal size excluding cost of cement..15mm thick minimum plastering with 1 cement 6 coarse sand to all faces of walls channels in roof and other structures at various elevations including mixing laying, finishing curing and necessary scaffolding work complete as per drawings specifications with all materials and labours excluding cement including making grove if required. work will be done upto 10 m height..applying neat cement punning including cost of all materials labours etc. complete as per direction of engineer in charge excluding cost of cement.supplying and applying two or more coats of white wash with lime to walls ceiling etc. at various elevations including preparation of surfaces cleaning etc.complete with all materials labour scaffolding work as per specifications ..supplying and applying two or more coats of approved water proof cement paint over a coat of primer to exterior surfaces of concrete masonry plastered surfaces etc.at all elevations and including preparation of surface necessary scaffolding work etc.complete with all materials and labour application of paint should be made as per manufacturer specifications to give an even shade. .drain cleaning including disposal of rubbish up to 5 km all complete as per direction of eic.cleanning of chajja roof rwdc floor corner drains etc..painting with synthetic enamel paint of approved brand and manufacturer of required colour to give an even shade two or more coats on new or old work over a priming coat complete as per specification and direction of eic. .providing and fixing factory made isi marked steel glazed doors, windows and ventilator with beading and all members complete of standard rolled steel sections joints mitred and flash butt welded and sash bars tenoned and riveted including providing and fixing of hinges pivots including priming coat of approved steel primer but excluding the cost of other fittings complete all as per approved design sectional weight of only steel members shall be measured for payment..taking delivery from store or departmental yard fabrication and erection of structural steel work riveted bolted or welded in built up sections trusses and framed work including cutting hoisting fixing in position and applying a priming coat of approved steel primer all complete..providing and fixing bright finished brass casement window fastener with necessary screws etc. complete..providing and fixing following g.i. pipes complete with g.i. fittings including trenching and refilling etc.15 mm dia nominal bore.providing and fixing following g.i. pipes complete with g.i. fittings including trenching and refilling etc. 20 mm dia nominal bore.providing and fixing following g.i. pipes complete with g.i. fittings including trenching and refilling etc.25 mm dia nominal bore.providing and fixing following g.i. pipes complete with g.i. fittings including trenching and refilling etc. 50 mm dia nominal bore.providing and fixing following g.i. pipes complete with g.i. fittings including trenching and refilling etc. 100 mm dia nominal bore g.i.or cpvc...fixing of old g.i. pipes complete with g.i. fittings including trenching and refilling etc. 15 mm dia nominal bore.fixing of old g.i. pipes complete with g.i. fittings including trenching and refilling etc.20 mm dia nominal bore.fixing of old g.i. pipes complete with g.i. fittings including trenching and refilling etc. 25 mm dia nominal bore.providing and fixing c.p. brass bib cock or pillar cock of approved quality conforming to is 8931. 15 mm nominal bore..providing and fixing c.p. brass stop cock concealed of standard design and of approved make conforming to is 8931. 15 mm nominal bore..demolishing brick work in cement mortar manually or by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of eic.demolishing r.c.c or pcc work manually or by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of eic.dismantling g.i. pipes external work including excavation and refilling trenches after taking out the pipes manually by mechanical means including stacking of pipes within 50 metres lead as per direction of eic upto 150 mm dia.providing and fixing or renewing glass panes with putty and nails wherever necessary including racking out the old putty float glass panes of thickness 5.5 mm.renewing of old glass putty.supplying, laying in position stone masonary with hard rock boulder with cement morter 1 cement 6coarse sand morter finishing the top with pcc reasonably smooth complete with curing and raking of joints including cost of all material equipments and labour excluding cost of cement...providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete..distempering with oil bound washable distemper of approved brand and manufacture to give an even shade old work one or more coats.providing and fixing 35 mm thick factory made pvc door shutters with frame 65mm into 55mm with wall thickness 2 mm all complete as per manufacturers specification and direction of eic. .providing and fixing isi marked flush door shutters conforming is 2202 non-decorative type core of block board construction with frame of 1st class hard wood and well matched comercial 3 plyveneering with vertical grains or cross bands and face veneers on both faces of shutters 30 mm thick including isi marked stainless steel butt hinges with necessary screws..providing and fixing precoated galvanised iron profile sheets 0.50 mm total coated thickness with zinc coating 120 grams per sqm as per is 277 in 240 mpa steel grade 5 microns epoxy primer on both side of the sheet and polyester top coat 15 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by eic. the sheet shall be fixed using self drilling self tapping screws with epdm seal complete upto any pitch in horizontal vertical or curved surfaces including ridges barge board etc excluding the cost of purlins rafters and trusses and including cutting to size and shape wherever required. .providing and fixing following precoated galvanised steel sheet roofing accessories 0.50 mm total coated thickness zinc coating 120 grams per sqm as per is 277 in 240 mpa steel grade 5 microns epoxy primer on both side of the sheet and polyester top coat 15 microns using self drilling self tapping screws complete in ridges plain 500 mm.providing and fixing following precoated galvanised steel sheet roofing accessories 0.50 mm total coated thickness zinc coating 120 grams per sqm as per is 277 in 240 mpa steel grade 5 microns epoxy primer on both side of the sheet and polyester top coat 15 microns using self drilling self tapping screws complete in barge board up to 300mm.providing and fixing following precoated galvanised steel sheet roofing accessories 0.50 mm total coated thickness zinc coating 120 grams per sqm as per is 277 in 240 mpa steel grade 5 microns epoxy primer on both side of the sheet and polyester top coat 15 microns using self drilling self tapping screws complete in gutter. 600 mm over all girth.providing reinforced by organic fibres or inorganic synthetic fibres cement 6 mm thick corrugated sheets roofing up to any pitch and fixing with polymer coated j or l hooks bolts and nuts 8 mm dia. g.i. plain and bitumen washers or with self drilling fastener and epdm washers etc. complete excluding the cost of purlins rafters and trusses including cutting sheets to size and shape wherever required. .providing and fixing following fibre cement high impact polypropylene reinforced roofing accessories in all colours with polymer coated j or l hooks, bolts and nuts and or g.i. seam bolts and nuts g.i. plain and bitumen washers or with self drilling fastener and epdm washer etc. complete close fitting adjustable ridges.providing and fixing following fibre cement high impact polypropylene reinforced roofing accessories in all colours with polymer coated j or l hooks, bolts and nuts and or g.i. seam bolts and nuts g.i. plain and bitumen washers or with self drilling fastener and epdm washer etc. complete in barge boards .providing & fixing uv stabilised fiberglass reinforced plastic sheet roofing up to any pitch including fixing bolts nuts 8mm dia. g.i plain bitumen washers complete but excluding the cost of purlins rafters trusses etc. the sheets shall be manufactured out of 2400 tex panel rovigs incorporating minimum ultra violet stabiliser in resin system under approximately 2400 psi and hot cured. they shall be of uniform pigmentation and thickness without air pocketsthe sheets shall be opaque or translucent clear or pigmented textured or smooth as specified. 2 mm thick corrugated.repairing and maitenance of rolling shutter in all respect including greasing repairing replacement of material to repairing of rolling shutter..supply and fixing 27.5 cm long springs.supply and fixing ball bearing.supply and fixing precast slab m20 grade.providing wood work in frames of false ceiling or floor, partitions etc. sawn and fixed in position sal wood and 15 mm thick light weight integral densified micro look edged with pvc top matt false floor tiles of size 595 into 595 mm including cost of all materials labours and as per direction of eic. .aluminum work for shutters of doors windows ventilators including providing and fixing hinges pivots and making provision for fixing of fittings wherever required including the cost of epdm rubber neoprene gasket required fittings shall be paid for separately polyester powder coated aluminium minimum thickness of polyester powder coating 50 micron.providing and fixing water closet squatting pan indian type w.c. pan with 100 mm sand cast iron p or s trap 10 litre low level white p.v.c. flushing cistern including flush pipe with manually controlled device handle leverconforming to is 7231 with all fittings and fixtures complete including cutting and making good the walls and floors wherever required white vitreous china orissa pattern w.c. pan of size 580 into 440 mm with integral type foot rests..providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 into 260 into 350 mm or 340 into 410 into 265 mm sizes respectively..providing and fixing wash basin or kitchen sink with c.i. brackets 15 mm c.p. brass pillar taps 32 mm c.p. brass waste of standard pattern including painting of fittings and brackets cutting and making good the walls wherever require white vitreous china wash basin size 630 into 450 mm with a single 15 mm c.p. brass pillar tap all complete as per direction of eic..providing and fixing white vitreous china water closet squatting pan indian type orissa pattern w.c. pan of size 580 into 440 mm.supply and fixing pvc connecting pipe 15 mm n b.supply and fixing pvc flexible waste pipe 32 or 40 mm n b.supply and fixing float ball valve 20 mm n b.providing and fixing g.i. chain link fabric fencing of required width in mesh size 25 into 25 mm made of g.i. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of eic. .dismantling steel work in built up sections in angles tees flats and channels including all gusset plates bolts nuts cutting rivets welding etc. including dismembering and stacking within 50 metres lead..dismantling following roofing including ridges hips valleys and gutters etc.and stacking the material within 50 metres lead of g.s. sheet.dismantling following roofing including ridges hips valleys and gutters etc and stacking the material within 50 metres lead of asbestos cement sheet.

Related Searched Keywords : aluminum ventilator

List of aluminum-ventilator Tenders

Get aluminum ventilator Tender Alert...

Related Searched Keywords : aluminum ventilator

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us