Filters

List of aluminium-channel Tenders

List of latest aluminium-channel Tenders in Indian Tenders. Click on any aluminium-channel Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for aluminium-channel Tenders.

All-Tenders (12)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :35557999 | 16 Oct, 2025

Tender Value : 30.35 Lacs

Jaipur - Rajasthan

Tender for "part-a (building work) based on bsr pwd - 2019, dausa earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils " "pcc in foundation : providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)." random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in: cement mortar 1:6 ( 1-cement : 6-sand). centering and shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc. centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.m20 grade nominal mix supplying and filling in plinth with sandy soil free from deleterious and organic material under floors including watering ramming consolidating and dressing complete including cost of sandy soil with all lead and lift. stone kharanja : random rubble dry stone kharanja under floor. brick work with clay flyash f.p.s. brick of class designation 75 in superstructure above plinth level upto floor five level in : cement mortar 1 : 6 (1 cement : 6 coarse sand) beam:- providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) providing and fixing m.s. sheet 1mm thick single leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint extra for double leaf shutters. glazed windows : providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required : windows side hung /ventilators top or centre hung (openable) supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. guard bars : providing and fixing square bars or other flat welded to window, ventilatiors etc. kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm internal plaster : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :12mm thick. external plaster : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. plaster (ceiling): 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand) grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. painting exterior surface of wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including sand papering, prime coat, making smooth surface with cement based putty etc complete in all respect: . new work panting on doors & windows :- painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work door frames:-providing and fixing in cm 1 : 4 double paitam (rebated) stone door window and ventilator frames of approved quarry :size 100 x 75mm. p&f rigid pvc pipe (is:4985 mark) class ii(4 kg. /cm.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant 110mm dia p&f rigid pvc pipe fittings (is: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: bend 87.5 110mm dia pipe clip 110mm dia providing and fixing granite stone slab mirror polished and machine edge cut in walls, pillars, steps, shelves, sills counters, floors etc. laid on 12mm (av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete.green / blackabove 3601 cm2 slabs providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to is : 13753 & is :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). "part-b (sanitary work) based on bsr pwd - 2014, dausa circle p & f kitchen & lab. sink of approved make with c.i. brackets duly painted, 40 mm c.p. waste coupling, c.p. brass chain with rubber plug, 40 mm g.i. waste pipe up-to floor level complete including cutting and making good the wall & floor :wvc lab sink (is:2556 mark) size 530 x 430 x 180 mm " p & f chromium plated swan-neck laboratory cock of approved quality / make:one way p & f ball cock (is :1703 mark) with rod & p.v.c. ball complete :brass wt.400 gm,15mm. p & f inlet connection (angle valves) superior quality, of approved make, for wash basin, gyser etc. c.p. inlet connection 15mm.brass (is : 8931 marked) p & f 15 mm. dia connection pipe of approved quality/make :(-do-) 450mm. p & f full-way valve (is:778 mark) or wheel valve of approved make :gun-metal 15mm nominal bore. p & f stop cock (is :8931 mark), superior quality & of approved make:brass 400 gm. 15mm nominal bore. p & f pvc storage tank isi marked (is : 12701) indicating the bis license no), of approved make with cover, 25mm dia 1m long g.i. over-flow pipe & 25 cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 500 (-do-) p & f g.i. pipes (external work) with g.i. fittings excluding union (is : 1239 mark) including trenching & refilling earth etc.15mm dia nominal bore'b' class p & f g.i. pipes (external work) with g.i. fittings excluding union (is : 1239 mark) including trenching & refilling earth etc.25mm dia nominal bore 'a' class construction of soakage well in all types of soil of approved drawing, top 90 cm .portion in 450mm thick masonry with cm 1:6, 80 mm thick stone slab covering, jointing of slab in cm 1:3 ,ralthal, kharanja 40mm thick m-15 grade c.c flooring, earth work etc . complete including disposal of surplus earth within a lead of 50 mtr . inner dia 90 cm & 10 to 12 mtr deep. "part-c (electric work) based on bsr pwd 2013, jaipur circle wiring of light point/fan point/exhaust fan point/ call bell point with 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is: 694) of approved make group-2 light point short point (up to 3 mtr.)" medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3 pin 5 amp. light plug point with 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is: 694) of approved make in surface/reces group - on board s & f follwing sizes (dia.) of isi marked medium duty pvc conduit along with accessories in surface/ recessed using clamps, fastener as required including cutting the wall , covering conduit with wire mess and making good the same as required. group-2 25 mm dia "supplying and drawi;ng fr pvc insulated & unsheathed flexible copper conductor isi marked (is:694) of 1.1 kv grade and approved make in existing surface ofr necessed conduit/ casting capping including making connections etc. as required. group-2 2 x 1.5 sq. mm" 2 x 2.5 sq. mm p & f 240/415 v mcb of breaking capacity not less than 10 ka (b/c/d tripping characteristic) isi marked is 8828 (1996)/conforming to iec 60898 in existing board/ sheets including making connections with lugs, testing etc. as required. group-2 6 a to 32 a rating p & f recessed/ surface mounting heavy duty horizontal type sheet steel distribution board phophatised/ powder painted complete with 100 amp copper copper bus bar, shorting link, neutral, earth link and din bar, conforming to is 13032 & is 8623 including making internal db termination with copper lux, testing etc. as reqd. . group-2 single door(single phase) 8 way p & f strip fluorscent tube fitting fabricated from (crca sheet and finished with powder coating/stove enamelled non corrosive uv resist ep channel) complete with accessories(low loss copperchoke, starter, starter seat)/electronic choke with terminal block duely prewired with copper conducter including making connection, testing etc. as required(without tube)1x36 watts with occb. group-2 p & f fluorscent tube rod in existing fixtures as required, minimum 3 star rating,36/40 watts p & f star rated double ball beari;ng capacitor start, aluminium body and blade ceiling fan with down rod upto 30 cm with 3x1.5 sqmm pvc insulated flexible copper conductor making connection testing etc as required.1200 mm sweep 3 star rated p & f is:371 marked 6 amp sufface type celling rose inculuding making commection testing etc. grup-2 (e071400) p & f isi marked 6 amp bakelite batten/ angle holder including making connextion testing etc as required p & f 18 swg ms recessed fan box, hexagonal/round of size 130mm dia, depth 75 mm , 12mm dia rad fan hook with 100mm length extended on eeach side. gourp-1 p & f 18 swg sheet steel boxes duly finisded with two coats of red oxide and with earthing terminal of following sizes (nominal size) on surfacae or in recessed as required. 175 mmx 100 mmx60 mm

Central Government/Public Sector

TRN :35559665 | 21 Oct, 2025

Tender Value : 0

Pune - Maharashtra

Tender for gem bids for hardware, steel wire brush 6inch superior quality steel wire brush10inch superior quality hinges 2inch mild steel withpowder coated 14 gauge hinges 3inch mild steel withpowder coated 14 gauge hinges 4inch mild steel withpowder coated 14 gauge hinges 6inch mild steel withpowder coated 14 gauge bow handle 4inch alumunium nails 1inch headless wire nails 050inch wire nailsheadless 075inch wire nails 1inch wire nails 150inch wire nails 2inch wire nails 3inch wire nails 4inch wirenails 5inch wire nails 6inch headless nails 1inch headless nails 15inch headless nails 2inch headlessnails 1inch 17 nos headless nails 15inch 17 nos woodenscrew 050inch pkt of 100 nos full thread wooden screw075inch pkt of 100 nos full thread wooden screw 1inchpkt of 100 nos full thread mirror screw 125inch woodenscrew 15inch full thread wooden screw 3inch full thread screw 050inch full thread screw 075inch full thread screw 1inch full thread screw 15 inch full thread screw2inch full thread screw 3inch full thread special drill bit 4mm for concrete special drill bit 5 mm for concrete as persample binding wire check nut for sd screw sd screw1inch sd screw 2inch file hand saw 4inch pad lock withkey 50 mm pad lock with key 65 mm gypsum board 060m x 060 m x 12 mm aluminium l clamp power coated15inch x 15inch nut bolt size 050inch 12 mm x 4 mm dia rivet 050inch long for alluminium t l channel ceilingwork aluminium t channel powder coated size 15inch x15inch gi wire 4 mm thichness gi wire 2 mm thichness aluminum curtain rod 075inch dia aluminum curtain rodside holder 075 dia with clambing screw steel curtain rod1inch dia ss curtain rod side holder 1inch dia with clampand clamping screw and rawel plug 5 mm fly proof wiremesh steel wire dia 24 swg 15 m long 4 ft width floor bid number gem2025b6754504 dated 06-10-2025 bid document1 91 1 1 door stopper small, wooden ply cutting blade, fevicol sr998, araldite 180 gms, vinyl flooring sheet 1mm thickness, pbs roll 1.5 mm thick 01 mtr width 20 mtr length makeshalimar, oil stone 6inch x 2inch x 1inch, glass cuttermechanical, tinted toilet window glass pan 6ft x 4ft x 3mm, glass pan 6ft x 4ft x 4 mm, glass putty, lookingmirror 2ft x 4ft aluminium beeding, looking mirror 2ft x1.5ft aluminium beeding, ravel plug pvc 4mm or 6mm, door handle aluminium 4inch, haxsaw blade 0.50inch highspeed 1ft long appx, haxsaw blade 1inchhigh speed 1ftlong appx, m seal 100 gm, suction pump for clearingblockage bath or toilet 3inch dia, tower bolt aluminium6inch, tower bolt aluminium 8inch, tower bolt aluminium10inch, door closer helical, door closer hydraulic, slidingbolt 12inch, sliding bolt 8inch, handle consealed 4inch, handle folding 3inch, plastic bush 2 inch length and thick12 mm, ss screw 0.50inch, ss screw 0.75inch, butthinges ss0.75inch x 0.75inch x 3inch, tower bolt 4 inch, curtain socket one side 1 inch matki, ss handle 6inch, sshandle 4inch, mortec lock, auto cut hinges, furniturepvc edge band tape 0.75inch ivory 50 mtrs, furniture pvcedge band tape 0.75inch wooden 50 mtrs, sand paper, ceramic tiles 0.30 m x 0.30m x 6 mm, ceramic non skidtiles 0.30 m x 0.30m x 6 mm, vertified tiles 0.60 m x0.60m x 8 mm, vetrified tiles 0.30 x 0.30x 6 mm thickwhite colour, wall tiles 0.45 x 0.30x 8 mm thick whitecolour, wall clading tiles 240mm x 60mm x 9mm d colour, j hook 6inch half threaded with nut and washers 8 mm, drfix it, fevicol sh for wood work, dha iron appx weight of01 kg, spade appx 1 kg wt, showel with handle make tataor eqvt appx 1 kg wt, pick axe appx 2.50 to 3 kg wt, crowbar 5ft long, tasla 24inch pan mortar plastic appx 18inch to24inch dia, plumb bob, mason thread plastic, spirit levelsize 12inch, stabila spirit level type 70 mm or equivalent, mason hammer 1 kg mbt riveting hammer head, masonhammer 1.5 kg, mason trovel small size, mason troveliron big size, water level pipe 8 mm dia, 3 m cate eyeindicator, road sign boards, right angle 12inch, cuttingwheel 4inch dia for angle grinder, multipurpose non sliprubber reusable gardening dishwashing scrubbingcleaning gloves size 9 inch, construction black safetygumboots black size 9, psh 02 rachet type safety helmetwith nape strap white colour, psh 02 rachet type safetyhelmet with nape strap yellow colour, safet jackets white, safet jackets yellow, demolition hammer 5 kgs 1500w, marbel moulding grinder 4 inch dw801 850 w anglegrinder, dustless chalks white 100 no per pkt, tile cuttingblade, carbon bush for tile cutting machine, tile cuttingmachine gdc 120 mm professional, ms square pipe 70mmx 70mmx2.6mm th 6mtr length, ms square pipe 50mm x50mmx2.6mm th 6mtr length, ms square pipe 20mm x20mmx2.6mm th 6mtr length, ms pipe 40 mm dia 6 mtrlength, ms pipe 50 mm dia 6 mtr length, ms angle 50mmx 50mm x 5mm, agnle iron d size, ms flat 1inch x 3mm x10 mtr length, cast iron weldind road of size 200, ms arcwelding electrode e6013 2.5 mm dia, ms arc weldingelectrode e 6013 3.15 mm dia, arc welding hand shieldscreen, arc welding heavy duty copper cable 600 amp 70sqm, arc welding black glass 11 a1 din, protection glassfor arc welding white glass, chipping hammer, tongs 1ft6inch size, grinding goggles white, hand safe syn 021welding safety goggles, esab buddy arc 200 inverterwelding machine, hand gloves, heavy duty arc weldingholder 600 amp, heavy duty arc welding earth clamp, //bid details2 / 91 angular grinder 800 amps, 355 mm metal cut off grinder, metal cutting blade size 355 x 2.8 x 25.4 mm, weldinghelmet auto darkening, welding helmet normal, transparent polycarbonate corrugated sheet 10 ft

Central Government/Public Sector

TRN :35540922 | 15 Oct, 2025

Tender Value : 0

Aizwal - Mizoram

Tender for gem bids for bleaching powder , liq maiathion 50 percent , liq maiathion 95percent , foot powder , phenol , baygone black hit , dettol handwash 200ml , odomos cream 50gm , goodnight mosquito machine combo pack , refill goodnight , deet lotion 50ml , deltamerthrin 1 point 25 percent , dettol 500 ml , harpic blue 1 ltr , odonil room freshner , ononil bathroom freshner , lizol floor cleaner 500ml , moper , wiper , magnifying glass 3 or 4 inch dia , executive plastic leaf information folder a4 size 40 leaf sheets , acrylic sheet green colour4mm thick , aluminium channel 50x25 mm 10 feet long , screw aluminium 25x2mm pkt of 100 nos , gyser 15 ltrs cap make bajaj philips havells , curtain rod steel dia 15 20 mm , drawer channels 14 inch , bracket for curtain pipes complete , towel big size , towel small size

State Government

TRN :35531732 | 09 Oct, 2025

Tender Value : 0

Pune - Maharashtra

Tender for supplying diff type of material - 3kw solar panel system with necessary hardware materials with fitting and installation as per location including laborc harges with transport as per location 1 side 24w ssl semi integrated solar light gi tubular pole 6 mtr with single hole pass- height: 6 meter (20 feet) thickness: 1.2 mm with fitting and installation as per location including all labor charges with necessary hardware and material including all transport vaikunthrath mounted on tractor trolly_ axle width 6ft x length 12ft x width 6.5ft x height 6ft. tyre 7.50 x 16 kissan. ms structure. side plate aluminium. ms sheet 1.6mm. aluminium sheet 1.5mm. steps design.speaker. wire connector. pen drive. battery and tape box. spring. channel 75 x 40 240 ltr wheel garbage dustbin nilkamal 60+60=120 ltr dustbin with stand all in one intel core i5 | 8gb ram | 512gb ssd | 24" fhd | intel® uhd graphics | wi-fi+bt | fhd ir camera | k+m wireless | alexa | win 11home+ms office h&s 2024+1yr m365 | 1 yr warranty wi fi all in one color printer epson print scan_xerox 1 year warranty property tax e gram soft and old deta recover and app installation dsc setup with browser setting installation "net protector antivirus with one year subscription"

Central Government/Public Sector

TRN :35533257 | 25 Oct, 2025

Tender Value : 24.75 Lacs

New Delhi - Delhi

Tender for gem bids for aluminium tower bolt , aluminium sliding bolt , aluminium handle , aluminium door stopper , anti cockroach jaali , glass shelf , brass phase , brass phase half trun , brass phase marc , brass phase jaquar , ball cock super flow , cement , c.p. waste , c.p. pillar cock , cp swan pillar cock , cp connection pipe , cp shower with arm , cp jali grating , cp wash basin mixer , cp wall mixer , cp bib cock long body , cp bib cock short body , cp wall cap for tap , china wash basin , cp angle valve , curtain brackets , commercial board , cp bottle trap , cp towel rod , cp towel ring , curtain rod , cp extension nipple , chain link fencing , cp jali for sink , cutter blade , cutter blade wood , cutter blade iron , double syphon , drapery rod , ss drawer channel , ms chhapka kunda , english wc with s trap , flush door shutter , fevicol , gi nipple , gi reducing elbow , gi elbow , gi socket , gi reducing socket , gi union , glass putty , glass runner , glass corner , ms hinges , ms hex nipple , indian wc , cp health faucet , jet spray , mortice lock with handle , ms sliding bolt , ms tower bolt , ms handle , m seal , magnetic catcher , marandi wood batten , masking tap , ms nails , old dhoti , pvc connection pipe , pvc bib cock , pvc stop cock , pvc ball cock , pvc water tank , pvc ewc seat cover , pvc bend , pvc cistern , pvc waste pipe , pvc elbow , pvc socket , pvc tee , pvc nahani trap , pvc pipe , pvc tank cover , painting brush , synthetic enamel paint , plain glass 5 mm thick , pvc cistern handle , pvc syphon washer , cp toilet paper holders , gypsum screws , ss kitchen sink , seat cover hinges , water proofing compound , ss wire mesh , wall putty , drawer knob

Central Government/Public Sector

TRN :35527022 | 24 Oct, 2025

Tender Value : 0

Kolkata - West Bengal

Tender for supply of set of aluminium window channels..

Central Government/Public Sector

TRN :35519559 | 11 Oct, 2025

Tender Value : 0

Gurdaspur - Punjab

Tender for gem bids for stabilizer, stablizer for ac, electric wire for ac 2 ponit 5mm, ply 8multiply 4 multiply 12mm, wooden scaling 8 multiply 1point 5 multiply 10 inch, fevicol, partition labour charge, aluminium and channel, sliding wheel, glass, woodprimer, white paint, tarpin oil, brush 2 inch, ply 6multiply 4 multiply 9mm, steel nail, carpanter labour, home safe 32 amp mcb, glass for cupboard size 2 point 5multiply 2 point 5 multiply 5 mm, curtain rod, clamp forcurtain rod, door closer, fiber sheet, iron frame withfiber sheet, flex with frame 2 feet multiply 3 feet, digitalboard led, wall putty 25 kgs per bag

Central Government/Public Sector

TRN :35500786 | 20 Oct, 2025

Tender Value : 1.33 Lacs

Sambalpur - Orissa

Tender for gem bids for medical, c reactive protein test kit, syphillis kit, bloodsample cardiac troponin t test kit, blood groupinganti a, urine test strips, ph paper roll, microscopeslides cover slip, microscopic slide, leishmanstains, immersion oil, distilled water, droppingbottle with tip cap, stainless steel 304 straight sinusforceps, permanent marker pen, test tube rack, rubber tourinquet large size, type 1 creped toiletpaper, medical grade virgin polypropyleneuniversal 200 ui, medical grade virginpolypropylene universal pipette 1000 ui, isopropylalcohol, test tube 12x75mm, non vacuum bloodcollection tubes 4ml, non vacuum blood collection tubes2ml, borosil beaker 1000 ml, borosil beaker 250 ml, borosil beaker 500 ml, plastic bottle urineculture 50ml, fixed volume single channelmicropippettes, manual single channel variablevolume micropippettes, variable volume singlechannel micropippete, esr pipette pack of 50, wastecollection bags yellow, waste collection bagsblack, waste collection bags blue, wastecollection bags red, aluminium slide tray

State Government

TRN :35487116 | 16 Oct, 2025

Tender Value : 79.89 Lacs

Chandigarh Ut - Chandigarh

Tender for gem bids for mechanical, apparatus for verification of law of polygon of forces simply supported beam apparatus inclined plane andfriction slide apparatus winch crab single purchaseapparatus apparatus for determining centre of gravity ofregular irregular lamina bench grinding machine metallurgical microscope heat treatement furnace mufflefurnace spark test apparatus metallurgical cut offmachine standard prepared readymade samplesspecimen with photographs go-no go thread plug gaugem16x15 made of ss go-no go thread plug gaugem22x15 made of ss go-no go snap gauge measuringrange 50-63 mm made of ss go-no go ring gauge dia22mm with tolerance 0 to minus 21 microns made of ss go-no go ring gauge dia 22mm with tolerance 0 to plus21 microns made of ss slip gauges set surfaceroughness tester magnetic v block dial indicator withstand auto collimator with stand angle deckor with set ofangle gauges screw thread micrometer sine bar length125mm made of ss sine bar length 250mm made of ss feeler gauge comparator stand mechanical comparator clinometer gear tooth vernier meteric thread pitchgauge electronic weighing machine digital tachometer digital torsion testing machine pressure measuringbench hydraulic system trainer kit pneumatic systemtrainer kit pelton wheel turbine test rig francis turbinetest rig infrared thermometer digital pyrometer modelsof safety valve blow off cock steam stop valve feed checkvalve economizer demonstration actual cut section modelof two stroke single cylinder petrol engine model of solexcarburettor model of amal carburettor model of watercooling system of an automobile model of lubricationsystem of ic engine mpfi four stroke four cylinderpetrol engine test rig with eddy current dynamometer bid number gem2025b6723232 dated 26-09-2025 bid document1 130 1 1 model of mpfi system, model of crdi system, tool kit, pressure gauge, compound gauge, thermometer withcase, leak dedector to detect cfc hfcs, thermostaticswitch lp-hp cut out overload protector filters strainersand filter driers, refrigeration cycle testing rig, gascharging kit, split ac test rig, actual cut section model ofscrew compressor, actual cut section model of rotarycompressor, vapour absorption refrigeration test rig, vaccum pump, ice plant trainer, sling psychrometer, single plate clutch, multi plate clutch unit, centrifugalcluth unit, cut section of synchromesh gear box, model ofrack and pinion steering gear, model of power steering gearor re-circulating type worm and wheel or other type ofsteering gear, model of ac pump, model of su pump, automobile electric system, brake master cylinder, slidingmesh gear box, cut section model of 4 cylinder 4 strokepetrol engine, diesel fuel supply system, abs systemtrainer, air compressor for tyre inflation, inverter, electricvehicle kit, software, acetylene cylinder, acetylene pipe15 meter, acetylene regulator with spanner, anvil 50 kgwith stand, earthing cable 50mm 06 meter, electrodeholder simple, electrode holder heavy duty, gloves, handhacksaw frame, oxygen regulator with spanner, oxygencylinder, oxygen pipe 15 meter, single snip, weldingscreen, welding torch high pressure, welding torch lowpressure, carpentry bench vice, firmer chisel, gimlet, plough plane 200 mm, spoke shave plane, tenon saw 12inch -300mm, analog meggar, desert cooler, digital earthtester, earth leakage circuit breaker single phase, earthleakage circuit breaker single phase three phase four pole, electric oven, heat convector, motor coil windingmachine, residual current circuit breaker single phase, residual current circuit breaker single phase three phasefour pole, leg vice 4 inch, swage block 4 inch, benchgrinder 0.5 hp motor, bench vice heavy duty, flat filerough 10inch, flat file smooth 10inch, grinder, pipe vice, round die handle, tap wrench 5by16 inch to 1 inch, edgefolding machine, foot shear machine, funnel stake, grinder machine, hand shear 12inch bent snip aviationsnips, hand stake, hearth anvil, round stake, taper stake, gaggers, hand rammer, ladle, lifter- tong 2 in 1, molding boxes flasks, oil fired tilting type furnace, pneumatic rammer, riddle, sand mix muller, drillingmachine, grinding machine heavy duty, planner, powerhacksaw, shaper, welding cable 50mm copperapparatus for verification of law of polygon offorces:apparatus consisting of a wooden board of approx 20mm thickness of size 24x30 inches, fixed on a woodenslotted frame. four adjustable frictionless aluminium pulleysto be provided in the slots of the frame and the frame to beprovided with suitable arrangements for fixing it to a wall., simply supported beam apparatus:apparatus consists oftwo compression dial type spring balance and a woodenbeam of length 1m, minimum cross section 2cmx5cm withall weights and accessories, inclined plane and friction slideapparatus:apparatus consisting of wooden plane ofminimum size 60x15 cms having adjustment for setting theangle precisely. apparatusshould be supplied completelywith frictionless pulley, linear and circular scale, pan, awheeled trolley and a set of minimum six slide drawshaving bottom of metalic and non metalic materials., winch crab single purchase apparatus:apparatus consistingof a heavy duty c.i. wall brackets. the grooved wheel of 25cm dia and a set of gearing arrangements machine cut //bid details2 / 130 gears to be provided for measurement of efficiency ofwinch crab complete set with accessories., apparatus fordetermining centre of gravity of regular & irregularlamina:apparatus consisting of a rod mounted on a basewith a screw at the topand 8 laminas of clear acrylicmaterial- circular, triangular, square, trapezoidal and fourirregular shapes, bench grinding machine:grinding wheel dia300 mm, width 38mm, bore 1, centre height 910 mm, metallurgical microscope :the microscope should havemagnification 50x to 1500x with binocular head inclined at45 . both side coaxial focusing knobs, quadruple revolvingnosepiece with accurate centering and positive click stop, large coaxial mech. stage for x-y movement of specimen, bright field illuminator 6v-20w halogen lamp with fielddiaphragm, filter slot and bulb centering mechanism withred, green and blue filters . objectives : 10x, 45x, 100x, eyepiece : 5x, 10x, 15x paired . the microscope to besupplied with suitable digital camera resolution 10, 20, 50micrometer which can picturize & camera attachments fortaking photos of microstructure . the instrument should bepainted and supplied with dust cover & wooden box withlock and keys ., heat treatement furnace mufflesurface:rectangular design with regulator, mains indicator, 900-1000 c digital thermo electric pyrometer, mainthermal fuse, 3.5 kw . muffle size 12 6 6 with door . thefurnace should be with good insulation., spark testapparatus :suitable for measuring length of spark of metalsand alloys fitted with scale and pointer with heightadjustable vice for holding specimen, complete withgrinding wheel fitted on 1/2 h.p. motor works on 220v, 50hz supply . the apparatus should be nicely painted andfitted on a stand ., metallurgical cut off machine:suitable forcutting upto 30mm dia metal specimen complete with cutoff wheel fitted on 1 h.p. motor and coolant pump andholding vice, works on 220/230v ac supply ., standardprepared readymade samples/specimen withphotographs:set consists of a low carbon steel, bmedium carbon steel, c high carbon steel, d high speedsteel, e hardened and tempered steel, f grey cast iron, g malleable iron, h s.g. iron, i austenitic stainless steel, j case carburized steel, k aluminum alloy, l copperalloy brass, m powder metallurgy sample, n copperalloy bronze, o muntz metal, p electroplatedcomponent, q white cast iron, r pure aluminium, t purecopper, u magnesium alloy, v dead mild steel and xfusion weld steel, go-no go thread plug gauge : m16 x1.5 made of stainless stee, go-no go thread plug gauge:m22*1.5 made of ss, go-no go snap gauge measuringrange 50-63 mm made of ss:measuring range 50-63 mmmade of ss, go-no go ring gauge dia 22mm withtolerance 0 to minus 21 microns made of ss: 22 withtolerance 0 to - 21 microns made of ss, go-no go ringgauge dia 22mm with tolerance 0 to plus 21 microns madeof ss: 22 with tolerance 0 to + 21 microns made of ss, slipgauges set : surface finish below 0.2 of 1 microns, set ofm122 pieces with 87 set made of ss, surface roughnesstester:measuring range: 360 m minimum profileresolution: 0.02 m minimum minimum measuring range:17.5 mm x axis standards: iso, ansi, vda, jis powersupply: battery & ac adapter, magnetic v block : 70lx 100w x 95 h mm made of ss, dial indicator with stand : leastcount 0.01 mm maximum, auto collimator withstand:with standard accessories like plane reflector, opticalsquare instrument, base with leveling attachment, //bid details3 / 130 magnification 10x or above, lc 1sec, measuring range 30mins of arc in x-y axis, angle deckor with set of anglegauges:micro optic and manual operated with maximumworking distance 12m, should consist of microscope, objective lens, two scales engraved on glass screen, opticalsquare of a 1 sec of arc, accuracy 6 sec of arc, resolution0.5 secs of arc or better and set of angles, screw threadmicrometer:stainless steel 0-25mm screw thread pitchmicrometer: with anvils, sine bar : length of sine bar125mm and made of ss to be used for anglemeasurement, sine barlength: 250mm made of ss :length : 250 mm made of ss to be used for anglemeasurement, feeler gauge : 4 long, 26 leaves made ofss, comparator stand:the comparator stand shouldconsists of a very stable flat ground base and an uprightpillar with a mounting bracket for the dial gauge. horizontaldisplacement for the dial gauge should be provided in themounting bracket. base size: 150 x 150 mm pillar dia: 30mm measuring range: 160 mm horizontal displacement: 40mm throat depth: 130 mm, mechanical comparator:magnification range 300-5000 scale estimation of the orderof 0.001 mm, clinometer : minimum dimensions :75 x 50 x15 mm tools for accurately measuring angles andelevations in various applications., gear tooth vernier :measuring range 0-25 mm with l.c 0.001mm used tomeasure the dimensions of gear teeth, meteric thread pitchgauge:pitch range 0.4 mm to 7 mm with 21 leaves made ofss, electronic weighing machine:capacity, 5kg readabilitymin.1 gm, min. pan diameter 100 mm with lcd displaywith battery, digital tachometer : range 0.5 to 19999 rpmor higher, contact type, with lcd display : used for themeasurement of rpm, digital torsion testing machine: maximum torque capacity 100 nm least count 0.01nm torsion speed 1.5 rpm clearance between grips 0-420 mm grips for round specimen 4 mm 8 mm, 8mm 12 mm grips for flat specimen 2-8 mm width forflat specimen 25 mm motor power 0.5 hp powersupply 3 phase 440 volt 50 hz windows 11 os basedsoftware should be capable of real time graphs, pressuremeasuring bench:the setup should be self containedwater recirculating unit consisting of a pipe line withpressure gauge, u- tube differential manometer, singlecolumn manometer and piezometer tube for measuringdifferent types of pressure. ss sump tank of 50 literscapacity with drain valve, fhp centrifugal pump with motor, control panel with on / off switch, mains indicator, fuses etc.the setup should be arranged in a good quality paintedstructure and should be supplied with instructional manual., hydraulic system trainer kit:hydraulic trainer kit, consisting of the following matching components andaccessories :- 1. hydraulic power pack with 1 external gearpump having a delivery rate of 2.5 pm, approx @1400rpm operating pressure 60 bar, coupled to a single-phase ac motor 230 v ac having start capacitor andon/off switch and overload protection, 2 pressure reliefvalve adjustable from 0-60 bar, 3 oil reservoir> 5 literscapacity having sight glass, drain screw, air filter, and p andt ports. 2. pressure relief valve pilot-operated 3. drip tray.shell size 1160 mm x 760 mm 4. pressure gauge glycerin-damped, indication range of : 0-100 bar 5. four-waydistributor with five ports, equipped with a pressure gauge6. double acting hydraulic cylinder with a control cam, piston diameter 16 mm, piston rod diameter 10 mm, strokelength 200 mm. 7. suitable weight for vertical loading of //bid details4 / 130 hydraulic cylinder 8. mounting kit for weight for realizingpulling and pushing load 9. 3/2 way directional controlvalve with hand lever actuation 10. 4/2- way directionalcontrol valve with hand lever actuation 11. 4/3 waydirectional control closed-center position, with hand leveractuation 12. non-return valve 13. pilot-operated checkvalve pilot to open 14. one-way flow control valve withintegrated check valve 15. t- connector with self sealingcoupling nipples 2 nos. and quick coupling socket 1 no.16. profile plate, anodized aluminum, 100x700 mm, withcarriers, mounting frames and mounting accessories 17.dol starter, pneumatic system trainer kit:pneumatictrainer kit, consisting of the following matching componentsand accessories :-1. single acting cylinder max. strokelength 50 mm. bore dia 20 mm. 2. double acting cylindermax. stroke length 100mm. bore dia 200 mm magnetictype. 3. 3/2- way valve manually actuated normally closed4. 3/2-way valve pneumatically-actuated. spring return. 5.one-way flow control valve. 6. 5/2- way valve withmanually-operated switch 7. 5/2-way valve pneumatically-actuated spring return 8. 5/2-way valve pneumatically-actuated double pilot 9. 3/2-way roller lever valve directactuation normally closed 10. shuttle valve or 11. two-pressure valve and 12. pressure gauge 0-16 bar 13.manifold with self-closing nrv, 6-way 14. push buttonstation for electrical signal input with 3 illuminatedmomentary-contact switches 1 no + 1 nc and 1illuminated maintained-contact switch 1 no + 1 nccontact load 2 a. 15. relay station with 3 relays each with 4contact sets 3 no + 1 nc or change- over type. 5 a 16.3/2-way single solenoid valve with led 17. 5/2-way singlesolenoid valve with manual override and led. 18. 5/2-waydouble solenoid valve with manual override and led. 19.power supply unit, input voltage 85-265 v ac, outputvoltage : 24 v dc, output current : max 4.5 a, short-circuit proof. 20. profile plate . anodised aluminum 1100x700mm, with carriers. mounting frames and mountingaccessories., pelton wheel turbine test rig: outputpower: 1 kw. discharge : 350 lpm approx. supplyhead : 30 m. speed : 1000 rpm approx. impeller :bucket type, nozzle: materia| stainless steel. spear:material stainless steel. dynamometer: rope brake drumtype, drum dia. 200 mm. sump tank: capacity 200 ltrs. water circulation! centrifugal pump, ktrloskar/standardmake, 5 hp, discharge measurement: venturi meter withdifferential pressure manometer. control panel comprisesof: rpm measurement: digital rpm indicator with proximitysensor., francis turbine test rig: output power : 3 kw. discharge : 2000 lpm approx. supply head : 20 mapprox. speed : 1500 rpm approx. runner: curvedvanes type. dynamometer: rope brake drum type, drumdia 300 mm. sump tanl : capacity 400 ltrs. approx. water circulation: centrifugal pump, i|kioskar/standardmake, 15 hp, 3 phase. discharge measurement: venturimeter with differential pressure manometer. control panelcomprises of :rpm measurement: digital rpm indicator withproximity sensor., infrared thermometer :range unto 500degree celsius with digital display, digital pyrometer:opticalsensor radiation pyrometer for temperature measurementon small target to 0.0005 0.0127mm accuracy: 0.5%range selectable digital display: c, f, r, k standardtemperature ranges: unto 1000 c, adjustable emissivitysetting: 0.01 to 1.0, models of safety valve, blow off cock, steam stop valve, feed check valve, economizer:metallic //bid details5 / 130 cut section model, demonstration actual cut section modelof two stroke single cylinder petrol engine:originaldissected, two stroke single cylinder petrol engine of ascooter. engine consisting of carburettor etc. complete withall salient parts sectioned for study of the variouscomponents and their functions., model of solexcarburettor:original carburettor duly sectioned andmounted on base., model of amal carburettor:originalcarburettor duly sectioned and mounted on base., model ofwater cooling system of an automobile:metallic modelshowing various parts of water cooling system, model oflubrication system of i.c. engine :actual metallic modelshowing various parts of lubrication system, mpfi, fourstroke four cylinder petrol engine test rig with eddycurrent dynamometer: i. petrol engine: a four strokefour cylinder petrol engine developing about 85 hp withstandard accessories. engine provided with water cooledradiator system, self-starter with battery, dynamo, lubrication oil filter, fuel pump, ignition coil, exhaust silencer.engine provided with switches for conducting morse test.ii. loading device: an eddy current dynamometermust be provided with the engine which is directly coupledand should have cooling system. iii. suitable arrangementfor fuel consumption measurement. iv. latest suitablearrangement for air intake and exhaust gasmeasurement.temperature sensor for measuring the airintake temperature to be provided. a temperature sensoralso provided to measure the exhaust gas temperature.suitable arrangement for measurment of heat carried awayby cooling water. v. panel board : the entiretemperature and other parameter measuring devicesmounted on separate panel board. it also consists of ignitionand starting switch and switch assembly for cutting off eachcylinder for conducting morse test with control of eddycurrent dynamometer loading. , model of mpfi system:actual working metallic model showing various parts ofmpfi system, model of crdi system :actual working metallicmodel showing various parts of crdi system, tool kit:kitconsists of cutting toolstube cutter, bending tool, flaringtool, swaging tool & brazing tool for copper pipeused forrepair and maintenance of refrigeration equipmentequipment, pressure gauge : size 0-300 lb/sq inch., compound gauge : 30-0-150 lb. 2.5 dial 1/8 inches hpt, thermometer with case : range 0 to 250 degree celcius, leak dedector to detect cfc & hfcs:leak detector withprobe minimum 14 inch long made up of stainless steel andhose, led display, leak alarm and able to detect cfc hfcs, thermostatic switch, lp/hp cut out, overload protector, filters, strainers and filter driers: thermostatic switch, lp/hp cut out, overload protector, filters, strainers andfilter drier fitted on board, refrigeration cycle testingrig:vapour compression type consisting of refrigerationcycle demonstration equipments compressor : 1/3 hpcondensor fin : air cooled solenoid valve, expansion valve, capillary expansion, lp-hp cutout, pressure and compoundgauge : variac : for applying variable load in evaporatorammeter: digital 0 10a ac lc 0.01 amp voltmeter :digital 0 500v ac lc 1v rota meter: for measuring flowof liquid refrigerant, digital wattmeter for powermeasurement of compressor and heater. pressure gauge 0to 300 psi r-134a temp indicator 6 channel : digital, -500c to1500c lc 0.10c overall size : 4 x 2 x 5 approx , gas charging kit:fitted with vaccum pump withpipe line with different valves and pressure gauges. //bid details6 / 130

Central Government/Public Sector

TRN :35457861 | 16 Oct, 2025

Tender Value : 0

Bangalore - Karnataka

Tender for gem bids for autoclavable biohazard bags 24x30 pkt of 100 nos red , multi channel pipette 8 channel 50 300ul , filter papers tissue paper 2ply roll of 150 gms length 48m width 10cm brand good house , aluminium foil roll 9mtr x 30cms 10 point 5 microns fresh wrap superwrap , 100bp dna ladder 50ln , bottle reagent n m with screw cap and pouring ring 1000ml , bottle reagent n m with screw cap and pouring ring 2000ml , tough spots 9 point 5mm dia white pkt of 1000 nos , tough spots 9 point 5mm dia red pkt of 1000 nos , tough spots 9 point 5mm dia blue pkt of 1000 nos , tough spots 9 point 5mm dia green pkt of 1000 nos , parafilm m 4 inches x 125 feet pm996 , parafilm m 2 inches x 250 feet pm992 , soft loop sterile 10ul pouch of 10 ps pkt of 100 nos , micro tips pp upto 20 200ul pkt of 1000 nos , micro tips pp upto 0 point 2 10ul pkt of 1000 nos , micro tips pp upto 200 1000ul pkt of 500 nos , nitrile gloves blue powder free g10 2pro medium pkt of 100 nos , bottle reagent wide mouth 30ml pp 72x5 360 nos , centrifuge tube with screw cap pp 50ml rs sterile 500x1 500 nos , carboy 5lit with stopcock pp

Related Searched Keywords : aluminium channel

List of aluminium-channel Tenders

Tender for supply of set of aluminium window channels..

Get aluminium channel Tender Alert...

Related Searched Keywords : aluminium channel

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us