Filters

List of aluminium-angle Tenders

List of latest aluminium-angle Tenders in Indian Tenders. Click on any aluminium-angle Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for aluminium-angle Tenders.

All-Tenders (33)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :34838870 | 02 Aug, 2025

Tender Value : 0

Ranga Reddy - Telangana

Tender for gem bids for ceramic western commode 660mm 380mm 740 mm withseat cover make parryware or hindware or cera, pvccistern of ten ltr capacity complete make parryware orhindware or cera, ceramic wash basin 450 mm makeparryware or hindware or cera, stainless steel jet withconnection health faucet 25 mm dia make prayag or cera orhindware, looking mirror 500 mm x 350 mm x 6 mm withfitting of make saint or gobain or prayag alongwith plasticcabinet, cp towel rail of 609 mm with fitting makeparryware or prayag or cera, stainless steel curtain rod1828 mm with fitting make jindal or tata or sail, plasticcurtain 1828mm x 1524mm with ring, cp shower completeset with 300mm long make cera or prayag or hindustan, cpwall mixer with fitting make cera or prayag or hindustan, led 18 watt with ceiling light make havells or bajaj or syska, led tube rod 18 watt make havells or bajaj or syska, bulkhead 20 w make havells or bajaj or syska, toilet paperholder make prayag or cera or hindustan, water tank 500ltr cubical type make sintax or apollo or supreme, cp soapdish make hindustan or cera or prayag, cp two way bib tap15mm make prayag or cera or jainco, cp angle cock 15mmmake prayag or cera or jainco, cp pillar tap 15mm makeprayag or cera or jainco, motor 0.5 hp alongwith boosterpump and necessary plumbing make kirloskar or cromptongreaves or hindustan, 32 amps double pole mcb alongwithgang box make schneider or leygrand or havells, pvcexhaust fan 300 mm x 300 mm make bajaj or khaitan orcrompton or greaves, switch board 2 way make havells orrico or anchor, switch piano type 6 amp make havells orrico or anchor, switch socket 16 amp make havells or ricoor anchor, sewage disposal as per tech specification anddrawing att in rfp tank make of steel jindal or tata orsail, wire 10 sqmm 2 core aluminium make havells orpolycab or anchor, fabrication and supply of modified twomen mob fd toilet one side platform as per technicalspecification and drawing attached in rfp

Central Government/Public Sector

TRN :34842792 | 05 Aug, 2025

Tender Value : 0

Bangalore - Karnataka

Tender for gem bids for w2, aluminium alloy connector amphenol 55 pin with glnairtinel lock adapter straight telescopic for heat shrinkableboot with olive drab chromate over cadmium aluminiumalloy connector aphenol 4 pin with glenairtinel lockadapter right angle telescopic for heat shrinkable boot witholive drab chromate over cadmium aluminium alloyconnector aphenol 6 pin with glenairtinel lock adapterright angle telescopic for heat shrinkable boot with olivedrab chromate over cadmium aluminium alloy connectoramphenol 13 pin with glnair tinel lock adapter straighttelescopic for heat shrinkable boot with olive drab chromateover cadmium aluminium alloy connector aphenol 37 pinwith glenairtinel lock adapter right angle telescopic forheat shrinkable boot with olive drab chromate overcadmium aluminium alloy connector aphenol 13 pin withglenairtinel lock adapter right angle telescopic for heatshrinkable boot with olive drab chromate over cadmium bnc rf connector 9 point 8mm dia x 37mm long withmetalic protective cap assy as per sample te114949bj379290339 comma jss50860 electrical cable coppermulti strands silver coated 2 core with silver coated shieldwhite and white with blue line extruded modified xletfesingle jacketed white electrical cable copper multi strandssilver coated 2 core with silver coated shield red and whiteextruded modified xletfe single jacketed white 12awg triaxial cable copper multi strands silver coated conductorwith white pvc jacketed and two layer copper tinned screenwith pvc jacketd with ptfe jacketed black electrical cablecopper multi strands silver coated extruded modifiedxletfe white 20awg 19 by 0 point 20 single core electrical cable copper multi strands silver coated extrudedmodified xletfe blue 20awg 19 by 0 point 20 single core electrical cable copper multi strands silver coated extruded bid number gem2025b6391201 dated 15-07-2025 bid document1 57 1 1 modified xletfe white 22awg 19 by 0 point 16 single core, electrical cable copper multi strands silver coatedextruded modified xletfe blue 22awg 19 by 0 point 16single core, electrical cable copper multi strands silvercoated extruded modified xletfe white 24awg 19 by 0point 13 single core, electrical cable copper multi strandssilver coated extruded modified xletfe blue 24awg 19 by0 point 13 single core, heat shrinkable moulded bootstraight fluid resistance modified elastomer black with innerwall glue by adhesive properties raychem comma 202k121 25 01, heat shrinkable moulded boot straight fluidresistance modified elastomer black with inner wall glue byadhesive properties raychem comma 202 k 142 25 01, heat shrinkable moulded boot straight fluid resistancemodified elastomer black with inner wall glue by adhesiveproperties raychem comma 202 k 153 25 01, heatshrinkable moulded boot straight fluid resistance modifiedelastomer black with inner wall glue by adhesive propertiesraychem comma 202 k 132 25 01, heat shrinkablemoulded boot y transition fluid resistance modifiedelastomer black with inner wall glue by adhesive propertiesraychem comma 342 a 024 20 by, heat shrinkablemoulded boot t transition fluid resistance modifiedelastomer black with inner wall glue by adhesive propertiesraychem comma 322 a 134 20 by, heat shrinkablemoulded boot 3 way fluid resistance modified elastomerblack with inner wall glue by adhesive properties raychemcomma pt no 462a 034, heat shrink tube black 01 inch 12point 5 by 25 mm raychem dr 25, heat shrink tube black3 by 4 inch 9 point 5 by 19 mm raychem dr 25, heatshrink tube black 1 by 2 inch 6 by 12 mm raychem dr 25, heat shrink tube black 3 by 16 inch 2 point 5 by 5 mmraychem dr 25, heat shrink tube black 3 by 8 inch 5 by10 mm raychem dr 25, heat shrink tube white 16 by 32mm, heat shrink tube white 12 by 24 mm, heat shrinktube white 9 by 18 mm, heat shrink tube white 6 by 12mm, heat shrink tube white 4 by 8 mm, heat shrink tubewhite 2 by 4 mm, heat shrink tube black 12 by 24 mm, heat shrink tube black 10 by 20 mm, heat shrink tubeblack 5 by 10 mm, heat shrink tube clear 16 by 32 mm, heat shrink tube clear 12 by 24 mm, heat shrink tubeclear 9 by 18 mm, heat shrink tube clear 6 by 12 mm, heat shrink tube clear 4 by 8 mm, heat shrink tube clear 2by 4 mm, heat shrink tube clear 1 point 3 by 2 point 5 mm, silver plated copper shield braid 16 by 24 mm pmlo, silver plated copper shield braid 10 by 16 mm pmlo, silverplated copper shield braid 6 by 10 mm pmlo, silver platedcopper wire mesh 30 mm width pmsr, copper ring tongueterminal comma crimp type tin coated with yellowinsulator for 6 mm od shield round braid 7 point 6 mm id x14mm od x 1mm, stainless steel band for braid crimpingas per drg a4 515 drg 54357, 2 by 3 core shield braidheat shrinkable solder ring splice butt with insulated clearsleeve and both side blue colour tint rings 28 38 awgshsb 1, 2 by 3 core shield braid heat shrinkable solder ringsplice butt with insulated clear sleeve and both side bluecolour tint rings 18 22 awg shsb 2, 2 by 3 core shieldbraid heat shrinkable solder ring splice butt with insulatedclear sleeve and both side blue colour tint rings 14 16 awgshsb 3, 2 by 3 core shield braid heat shrinkable solder ringsplice butt with insulated clear sleeve and both side bluecolour tint rings 10 12 awg shsb 4, 2 by 3 core shieldbraid heat shrinkable crimping splice butt with insulatedclear sleeve and both side blue colour tint rings 24 26 awg //bid details2 / 57 shsb 4, 2 by 3 core shield braid heat shrinkable crimpingsplice butt with insulated clear sleeve and both side bluecolour tint rings 18 22 awg shsb 1 point 25, blue tint forsplice joint compound spray acrylic conformal coating ac iiiin bectron, kapton tape 24 mm width, insulation tape pvcblack 18mm width, s1125 adhesive kit no 8 silicon pastepart a grey part b black s 1255 4, glue tape 24 mmwidth x 0 point 020 mm thk x 100 feet roll, loctitestructural adhesive 50 ml aa 324, loctite primer byactivator 100ml, lumicent paint white 22ml acrylic markerpaint, atc binding wire 0 point 3 mm dia, atc binding wire0 point 5 mm dia, nylon thread white 0 point 30 mm dia, dasooti black cloth, tissue paper 25 point 5 cm x 30 cm, iso propyle alchahol, solder soft 16 swg sn 63 percentcomma pb 37 percent hybrid, solder liquid hybrid, plasticcover comma 80 microns clear 24 inches x 24 inches, permanent marker pen black no 1523, masking tape 24mm width 10 mtrs rollaluminium alloy connector amphenol 55 pin with glnairtinel lock adapter straight telescopic for heat shrinkableboot with olive drab chromate over cadmium plate withprotective cap connector deutsch03428bddi jd38999/26-we-35sn : adopter glenair 440hs027nf 1706-63-0320jss: 50860, aluminium alloy connector aphenol 4 pin withglenairtinel lock adapter right angle telescopic for heatshrinkable boot with olive drab chromate over cadmiumplate with protective cap connector deutsch0349addijd38999/26-wc 4pa : adopter glenair 440hj030nf 1304-0320 jss: 50860, aluminium alloy connector aphenol 6 pinwith glenairtinel lock adapter right angle telescopic forheat shrinkable boot with olive drab chromate overcadmium plate with protective cap connectordeutsch0325cddi jd38999/26-wb 98sn : adopterglenair 440hj030nf1104-63 jss: 50860, aluminium alloyconnector amphenol 13 pin with glnair tinel lock adapterstraight telescopic for heat shrinkable boot with olive drabchromate over cadmium plate with protective capconnector deutsch0341eddi jd38999/26-wb-35sa :adopter glenair 31461-11540s1006055-0334 jss: 50860, aluminium alloy connector aphenol 37 pin with glenairtinellock adapter right angle telescopic for heat shrinkable bootwith olive drab chromate over cadmium plate withprotective cap connector deutsch0352addi jd38999/25-wd35 sn : adopter glanair 440hj030nfi505-0319 jss:50860, aluminium alloy connector aphenol 6 pin withglenairtinel lock adapter right angle telescopic for heatshrinkable boot with olive drab chromate over cadmiumplate with protective cap connector deutsch0342bddijd38999/26-wd 35 sn 3178340 : adopter glanair440hj030nf0903-63 jss: 50860, aluminium alloy connectoraphenol 13 pin with glenairtinel lock adapter right angletelescopic for heat shrinkable boot with olive drab chromateover cadmium plate with protective cap connectordeutsch0405dddi jd38999/26-wb-35sn : adopterglenair 440hj030np1104-63 jss: 50860, bnc rfconnector 9.8mm dia x 37mm long with metalic protectivecap assy as per sample te-114949 bj-379-29-0339, jss:50860, electrical cable copper multi strands silvercoated 2 core with silver coated shield white and white withblue line extruded modified xletfe single jacketed white24awg 19/0.132 core scd pt no . m27500-24sb2t23-06090, electrical cable copper multi strands silver coated 2core with silver coated shield white and white with blueline extruded modified xletfe single jacketed white18awg 19/0.252 core scd, electrical cable copper multi //bid details3 / 57

State Government

TRN :34843231 | 30 Jul, 2025

Tender Value : 17.76 Lacs

Trivandrum - Kerala

Tender for gem bids for office chair v3 q2, steel shelving cabinets adjustabletype confirming to is 3312 v4 q3, metal beds v3 q2 . . % % 4 4 /mse exemption for years ofexperience and turnoverno& % & % . . % % 4 4 /startup exemption for years ofexperience and turnoverno 5 5 & & /document requiredfrom sellercertificate requested in atc, oem authorizationcertificate, additional doc 1 requested in atc, additionaldoc 2 requested in atc, compliance of boq specificationand supporting documentin case any bidder is seeking exemption from experience /turnover criteria, the supporting documents to prove hiseligibility for exemption must be uploaded for evaluation bythe buyer7 7 9 9 : : ; ; & 9 & 9 < < 9 9 ; ; > >? ? % % /do you want to showdocuments uploaded by bidders to allbidders participated in bid?no -- b b c c 5 5 d d / minimum number ofbids required to disable automatic bidextension1 d /bid number: gem/2025/b/6405627; /dated: 15-07-2025 & & / bid document1 / 15 ; 9; 9 d d, , m m -- / / number of days for which bidwould be auto--extended7 o %o % ;5 ;5 ; ; /bid to ra enabledno 4 4 /type of bidtwo packet bid4 4 r r /primary product categoryoffice chair v3 s s & u & u /time allowed for technicalclarifications during technical evaluation2 days v v b b w w v v 4 4 / % % < 9 < 9 : : /inspection required byempanelled inspection authority / agenciespre-registered with gemno s s /estimated bid value1776000 s s w w /evaluation methoditem wise evaluation/ y & y & /arbitration clauseno /mediation clauseno //bid details /emd detail b /requiredno /epbg detail > /advisory bankstate bank of india 4 %/epbg percentage%5.00 b /duration of epbgrequired months.38a. , , \ v < ; / emd & performance securityshould bein favour of beneficiary, wherever it is applicable. \ \ /beneficiary : director, sctimstsree chitra tirunal institute for medical sciences and technology sctimst, thiruvananthapuram, departmentof science and technology dst, ministry of science and technologydirector, sctimst /splitting2 / 15 ; / bid splitting not applied. /mii purchase preference /mii purchase preferenceyes /mse purchase preference /mse purchase preferenceyes1. preference to make in india products for bids < 200 crore:preference shall be given to class 1 local supplieras defined in public procurement preference to make in india, order 2017 as amended from time to time and itssubsequent orders/notifications issued by concerned nodal ministry for specific goods/products. the minimumlocal content to qualify as a class 1 local supplier is denoted in the bid document. if the bidder wants to avail thepurchase preference, the bidder must upload a certificate from the oem regarding the percentage of the localcontent and the details of locations at which the local value addition is made along with their bid, failing whichno purchase preference shall be granted. in case the bid value is more than rs 10 crore, the declaration relatingto percentage of local content shall be certified by the statutory auditor or cost auditor, if the oem is a companyand by a practicing cost accountant or a chartered accountant for oems other than companies as per the publicprocurement preference to make-in -india order 2017 dated 04.06.2020. only class-i and class-ii local suppliersas per mii order dated 4.6.2020 will be eligible to bid. non - local suppliers as per mii order dated 04.06.2020 arenot eligible to participate. however, eligible micro and small enterprises will be allowed to participate .thebuyers are advised to refer the om no.f.1/4/2021-ppd dated 18.05.2023.om no.1 4 2021 ppd dated 18.05.2023 for compliance of concurrent application of public procurement policyfor micro and small enterprises order, 2012 and public procurement preference to make in india order, 2017. 2. purchase preference will be given to mses having valid udyam registration and whose credentials arevalidated online through udyam registration portal as defined in public procurement policy for micro and smallenterprises mses order, 2012 dated 23.03.2012 issued by ministry of micro, small and medium enterprises andits subsequent orders/notifications issued by concerned ministry. if the bidder wants to avail themselves of thepurchase preference, the bidder must be the manufacturer / oem of the offered product on gem. traders areexcluded from the purview of public procurement policy for micro and small enterprises and hence resellersoffering products manufactured by some other oem are not eligible for any purchase preference. in respect of bidfor services, the bidder must be the service provider of the offered service. relevant documentary evidence inthis regard shall be uploaded along with the bid in respect of the offered product or service and buyer will decideeligibility for purchase preference based on documentary evidence submitted, while evaluating the bid. if l-1 isnot an mse and mse seller s has / have quoted price within l-1+ 15% selected by buyer of margin ofpurchase preference /price band defined in relevant policy, such mse seller shall be given opportunity to matchl-1 price and contract will be awarded for 25% selected by buyer percentage of total quantity. the buyers areadvised to refer the om no. f.1/4/2021-ppd dated 18.05.2023 om no.1 4 2021 ppd dated 18.05.2023 forcompliance of concurrent application of public procurement policy for micro and small enterprises order, 2012and public procurement preference to make in india order, 2017. benefits of mse will be allowed only if seller isvalidated on-line in gem profile as well as validated and approved by buyer after evaluation of documentssubmitted. 3. estimated bid value indicated above is being declared solely for the purpose of guidance on emd amount andfor determining the eligibility criteria related to turn over, past performance and project / past experience etc.this has no relevance or bearing on the price to be quoted by the bidders and is also not going to have anyimpact on bid participation. also this is not going to be used as a criteria in determining reasonableness ofquoted prices which would be determined by the buyer based on its own assessment of reasonableness andbased on competitive prices received in bid / ra process. s s s s / evaluation method item wise evaluation method contract will be awarded schedulewise and the determination of l1 will be done separately for each schedule.the details of item-consignee combination covered under each schedule are as under:3 / 15 s /evaluation schedules s /estimated value & / / item/category /quantityschedule 1208000office chair v332schedule 2800000steel shelving cabinets adjustable typeconfirming to is 3312 v432schedule 3768000metal beds v364office chair v3 32 pieces 5 5 1 2 & & % % % % ^ ^ < < % % 4 4 b b /minimum 50% and 20% localcontent required for qualifying as class 1 and class 2 local supplier respectively u u /technical specifications u / as per gem category speci cation /speci cation u u /specificationname b b s s /bid requirementallowed valuesgeneralrequirementchair typenon-revolving and non-tilting chair with armrest, non-revolving and non-tilting chair without armrestunderstructurechair understructure typecantilever, legsunderstructure materialerw tube conforming to is : 1161 latest, aluminiumpipe hollow section conforming to is: 1285 latest, stainless steel ss 202, stainless steel ss 304, stainless steel ss 316, mild steel, solid woodthe shape of tubularsection of understructureround, square, rectangular, elliptical, nasection sizediameter/sides ofunderstructure19 mm, 22 mm, 25 mm, 30 mm, 19x19 mm, 25x25mm, 30x30 mm, 25x15 mm, 30x12 mm, 30x15 mm, 30x20 mm, 45x19 mm, 35x15 mm, 38x20 mm, naunderstructure wallthickness mm1, 1.2, 1.6, 2, 2.5, 3, na for woodcastoryes, noseatseat materialmoulded pu, pu foam, mesh, caned, hot pressedplywooddensity of pu used in seatkg per cubic meter< 30, >30< 40, >40< 50, >50, nathickness of pu used inseat mm< 30, >30< 40, >40< 50, >50, naminimum seat height fromfloor surface mm< 400, >400< 500, >500width of seat mm< 400, >400< 450, >450depth of seat mm< 400, >400< 450, >450seat upholstery materialmesh fabrics, polyester fabric, leatherette, leatherette with spacer fabric, leather, caned, moulded pu4 / 15 backrestbackrest base framematerialmild steel frame, hot pressed plywood, solid wood, injection moulded plasticbackrest materialmoulded pu, pu foam, mesh, caned, hot pressedplywooddensity of pu used inbackrest kg per cubicmeter< 30, >30< 40, >40< 50, >50, nathickness of pu used inbackrest mm< 30, >30< 40, >40< 50, >50, nawidth of backrest mm< 400, >400< 450, >450backrest height from theseat level> 350< 450, >450< 550, >550backrest upholsterymaterialmesh fabrics, polyester fabric, leatherette, leatherette with spacer fabric, leather, caned, moulded puarmrestarmrest typeoverhanging armrest, continuous armrest, mouldedarmrest continuously fitted with seat and back, moulded t armrest fitted with seat bottom, mouldedarmrest mounted to frame, without armrestarmrest movementadjustable, fixed, without armrestswarrantywarranty period in numberof years1, 2, 3, 4, 5 or higher year /speci cation u u /specificationname b b s s /bid requirementallowed valuesadditional specification parameters - office chair v3 32 pieces specification parameternamebid requirement allowed valuesremarksdetailed specification is included in buyer added bid specific atc. biddersshould submit declaration regarding the compliance of the specification.* bidders offering must also comply with the additional specification parameters mentioned above. //o ; a o ; a /consignees/reporting officer and quantity5. .5. ./s.no. //o ; a o ; a /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1shiju v s695011, sree chitra tirunalinstitute for medical scienceand technology, medicalcollege po, trivandrum3230steel shelving cabinets adjustable type confirming to is 3312 v4 32 pieces 5 / 15 5 5 1 2 & & % % % % ^ ^ < < % % 4 4 b b /minimum 50% and 20% localcontent required for qualifying as class 1 and class 2 local supplier respectively u u /technical specifications* u / as per gem category speci cation /speci cation u u /specificationname b b s s /bid requirementallowed valuesstandards andcertificationsgoverning standardconformity to is 3312generictypes of shelving cabinetsdimensions are withoutpedestal heightsmall 1150 mm x 760 mm x 430 mm, large 1855mm x 910 mm x 480 mmavailability of drawersyes, noavailability of lockersyes, noadditional specification parameters - steel shelving cabinets adjustable type confirming to is3312 v4 32 pieces specification parameternamebid requirement allowed valuesremarksdetailed specification is included in buyer added bid specific atc. biddersshould submit declaration regarding the compliance of the specification.* bidders offering must also comply with the additional specification parameters mentioned above. //o ; a o ; a /consignees/reporting officer and quantity5. .5. ./s.no. //o ; a o ; a /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1priya p695011, sree chitra tirunalinstitute for medical scienceand technology, medicalcollege po, triavndrum3230metal beds v3 64 pieces 5 5 1 2 & & % % % % ^ ^ < < % % 4 4 b b /minimum 50% and 20% localcontent required for qualifying as class 1 and class 2 local supplier respectively u u /technical specifications* u / as per gem category speci cation6 / 15 /speci cation u u /specificationname b b s s /bid requirementallowed valuesgenerictype of metal bedmetal bed, metal bed with headboard only, metal bedwith footboard only, metal bed with headboard andfootboard, metal bed with headboard, footboard andcanopysize category of metal bedsingle, double, queen size, king size, super king sizeoverall length of bed inmm1800 - 1850 mm, 1850 - 1900 mm, 1900 - 1950 mm, 1950 - 2000 mmoverall width of bed inmm750 - 900 mm 2.5 to 3 ft, 900 - 1050 mm 3 to 3.5ft, 1050 - 1200 mm 3.5 to 4 ft, 1200 - 1350 mm 4to 4.5 ft, 1350 - 1500 mm 4.5 to 5 ft, 1500 - 1650mm 5 to 5.4 ft, 1650 - 1800 mm 5.4 to 6 ft, 1800 -1950 mm 6 to 6.4 ft, 1950 - 2100 mm 6.4 to 6.9 ftoverall height of bed frominstallation level in mm150 - 200 mm, 200 - 250 mm, 250 - 300 mm, 300 -350 mm, 350 - 400 mm, 400 - 450 mm, 450 - 500mm, 500 - 550 mm, 550 - 600 mmavailability of headboardyes, noavailability of footboardyes, nometal bed framematerial of bed frameincluding legsmild steel, aluminium, wrought ironmetal bedmattress supportpaneltype of bed mattresssupporthorizontal beams only, vertical beams only, crossbeams - horizontal & vertical combomaterial of bed mattresssupport panelmild steel, aluminium, wrought ironmetal bedheadboardmaterial of bed headboardframemild steel, aluminium, wrought iron, nametal bedfootboardmaterial of bed footboardframemild steel, aluminium, wrought iron, naadditional specification parameters - metal beds v3 64 pieces specification parameternamebid requirement allowed valuesremarksdetailed specification is included in buyer added bid specific atc. biddersshould submit declaration regarding the compliance of the specification.* bidders offering must also comply with the additional specification parameters mentioned above. //o ; a o ; a /consignees/reporting officer and quantity7 / 15 . .5. ./s.no. //o ; a o ; a /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1shiju v s695011, sree chitra tirunalinstitute for medical scienceand technology, medicalcollege po, trivandrum6430special terms and conditions-version:1 effective from 25-06-2024 for category office chair v31. special terms and conditions1. the colours for the seat and back, are speci ed based on the procurement done by various buyerson gem. 2. sellers are advised to refrain from uploading any catalogue selecting image colour other than theoption chosen for the catalogue, as available in the category. any mismanagement of this will betreated seriously as per gem policies.3. in case buyer requires to buy any other colour not covered in the category, same may be speci edunder additional parameters while creating the bid. the colours mentioned in the additionalparameters by the buyer in the bid shall prevail over the colours indicated in the catalogue.4. sellers are advised to check the complete bid document while offering their prices.5 5 : : d d/buyer added bid specific terms and conditions1. genericoption clause: the purchaser reserves the right to increase or decrease the quantity to be ordered upto 25 percent of bid quantity at the time of placement of contract. the purchaser also reserves the right toincrease the ordered quantity up to 25% of the contracted quantity during the currency of the contract atthe contracted rates. the delivery period of quantity shall commence from the last date of originaldelivery order and in cases where option clause is exercised during the extended delivery period theadditional time shall commence from the last date of extended delivery period. the additional deliverytime shall be increased quantity original quantity original delivery period in days, subject tominimum of 30 days. if the original delivery period is less than 30 days, the additional time equals theoriginal delivery period. the purchaser may extend this calculated delivery duration up to the originaldelivery period while exercising the option clause. bidders must comply with these terms.2. genericbidder financial standing: the bidder should not be under liquidation, court receivership or similarproceedings, should not be bankrupt. bidder to upload undertaking to this effect with bid.3. genericbidders shall quote only those products part of service delivery in the bid which are not obsolete in themarket and has at least 7 years residual market life i.e. the offered product shall not be declared end-of-life by the oem before this period.4. certificatesbidders offer is liable to be rejected if they dont upload any of the certificates / documents sought in thebid document, atc and corrigendum if any.5. genericbidders are advised to check applicable gst on their own before quoting. buyer will not take any8 / 15 responsibility in this regards. gst reimbursement will be as per actuals or as per applicable rateswhichever is lower, subject to the maximum of quoted gst %.6. buyer added bid specific atcbuyer added text based atc clausesa. bidders are advised to quote prices as per technical specification and additional specification. bidders should not include price bid in the technical bid. the price format to be submitted along with financial bid only. if any of the price components disclosed in the technical bid, the bid will summarily be rejected and thebidder will be disqualified from further bidding process.b. bidders should submit the manufacturers authorization in attached format- a buyer uploaded atc documentc. liquidated damages:if the supplier fails to deliver or install/commission any or all the goods or fails to perform the services within the time frames incorporated in the purchase order, the purchaser shall, without prejudice to other rights and remedies available to the purchaser under the contract, deduct from the contract price, asliquidated damages, a sum equivalent to 0.5% per week of delay or part thereof on delayed supply of goods, installation, commissioning and/or services until actual delivery or performance subject to a maximum of 10 % of the contract price. once the maximum is reached purchaser may consider termination of the contract.if any delay by the supplier is maintained its contractual obligations towards delivery of goods andperformance of services shall render the supplier liable to any or all of the following sanctions:a. imposition of liquidated damages, b. forfeiture of its performance security andc. termination of the contract for defaultd. sctimst reserves the right to ask for a free demonstration of the quoted equipment/ items after giving reasonable time to the bidder at a pre-determined place acceptable to the purchaser or at a site in case of non-portable and heavy equipment for evaluating the technical compatibility as per the bidding documentspeci cations, professionalism and quality of work of the bidder for technically qualifying for opening the price bid. sctimst reserves the right to accept/ reject the bid based on the product/ site evaluation as stated above.1 2 door storage cupboards. indent no: 1 qty 32 supply & installation of 2 door cupboards the storage size should be 900w x 507d x 1950ht +/-1 mm. storage should be completely knock down construction. storage skirting should be removableand to cover integral legs and legs should be fitted with screw type leveller. storage should be made from combination of crca 0.8 mm & 0.6 mm thickness. storage door should be provided with steel hinge door. door lock should be 3-way 90 degree removable key type cam lock &locking mechanism and handle should be base aesthetically appealing, ergonomic, flush with door made from zinc alloy.9 / 15 one locker should be placed in the rh side of the storage with hinge door and 2-way cam lock with knob type handle top side full shelf should be fixed and adjustable half shelves 1 no on rh side of the storage & 2 no s on lh side of vertical partition. one number hanging rod should be provided on left half of partition below top shelf & another one on right half below locker both mounted on snap-ontype plastic brackets. storage nish should be epoxy powder coated to the thickness of 50 microns +/-10. product should be certified by bifma, greenguard, greenpro, aiota, and iaq2 cantilever chair. indent no.3 qty 32 supply &installation of non revolving chair the chair seat should be made of injection moulded in glass lled polypropylene compound which is upholstered with fabric upholstery covers and moulded polyurethane foam. the chair back should be injection moulded in glass lled polypropylene compound which is upholstered with mesh fabric seat size should be: 50 cm. d x48 cm. w back size should be: 53 cm. w x 39 cm. d the foam should be high-resilience polyurethane moulded with density 45+/-2 kg/m and hardness 16+/-2 kgf as per is: 7888 for 25% compression. chair under structure should be cantilever with powder coateddft 50 10 microns welded tubular main frame is made from 2.54 0.03 cm x 0.2 0.016cm and 1.9 0.3mm x 0.12 0.0096 cm with mild steel electric resistance welding tube. the armrest should be made of glass filled polypropylene compound andassembled over the tubular frame the chair shoes should be made of glass lled polypropylene compound with and pressed fitted with tubular frame. felt is provided below the shoes. 10 / 15 3 single bed with head and footboard. indent no.4 qty 64 supply & installation of single size metal bed. the bed size should be 2080w x 925d x 385 ht +/-1 mm. bed should be completely knock down construction with metal frame material. metal frame size should be mild steel pipe 25.4x 50.8 x 1.2 thk, mild steel pipe 19.05x 19.05 x 0.8 thk and angle 20x20x1.6 thk +/-0.1mm. bed should be provided with headboard & footboard bed nish should be epoxy powder coated to the thickness of 50 microns +/-10. product should be certi ed by bifma, green guard, green pro, aiota, and iaq additional terms and conditions1 the bidder participating in the tender should be an oem or an authorized dealer. upload manufacturer authorization: wherever authorized distributors are submitting the bid, manufacturers authorization form maf/certi cate withoem details shall also be uploaded.2 splitting up of bid items is not possible. bidder shall quote for all products mentioned in the bill of quantity. bidders o er is liable to be rejected if theydo not quote for all products mentioned in bill of quantity boq.3 bidder should upload speci cation and catalogues of the quoted products. bidder should provide the available colour options for the o ered chairs, lpsc reserves the right to choose the colours from the available options for the above items and the same will be mentioned in the p.o. 4 service escalation matrix of the bidder should be provided with o ce set up and warehouse details in kerala. registration certi cate also to be submitted as documentary evidence.5 the supplied products should be designed and tested as per bifma standards for comfort, safety, and durability.6 the bidder/oem should have manufacturing facility in india and they shall manufacture in accordance with iso 9001:2015, 14001:2015, 45001:2018 and 500o1:2018follow safety norms in accordance of ohsas7 the bidder/ oem should have green guard, aiota, iaq, green pro and griha certi cation for the o ered furniture which are in accordance with environment requirements and recognized under ministry of new and renewable energy.11 / 15 the bidder / oem themselves or through resellers, should have executed project for supply and installation / commissioning of same or

Central Government And Public Sector

TRN :34821028 | 30 Jul, 2025

Tender Value : 0

Kaiga - Karnataka

Tender for gem bids for aluminium edge angle

Central Government/Public Sector

TRN :34821928 | 05 Aug, 2025

Tender Value : 0

Ajmer - Rajasthan

Tender for supply of aluminium angle silky white anodized.

Central Government/Public Sector

TRN :34829959 | 01 Aug, 2025

Tender Value : 0

Gorakhpur - Uttar Pradesh

Tender for supply of aluminium angle moulding 30 x 30 x 1.5 x 2000 mm..

Central Government/Public Sector

TRN :34818049 | 01 Aug, 2025

Tender Value : 0

Bangalore - Karnataka

Tender for gem bids for electrical, aluminium screws 20mm pop approved quality aluminium screws 25mm pop approved quality aluminium screws 32mm pop approved quality automatic switch over carrier ac timer 230 volt borewell starter meco 25 hp casing and caping 25mm lengths modislashpolycare cardless musicalbell anchorslashgm ceiling fan 1200 mmhavellsslashushaslashorient ceiling fan 1400 mmhavellsslashushaslashorient ceiling fan 900 mmhavellsslashushaslashorient cell 1point5 voltsdura cell cfl 11 watt 230 volt philipsslashwipro copper lugs 25 sq mm dowells copper lugs 4 sq mmbullet type dowells copper wire 1 core 2point5 sqmm 3slash20 frlsh havellsslashfinolexslashsbee copper wire 1 core 25 sq mm frlshhavellsslashfinolexslashsbee copper wire 1 core120 sqmm frlsh havellsslashfinolexslashsbee copper wire 1 core 4point0 sq mm 7slash20 frlshhavellsslashfinolexslashsbee copper wire 1 core1point5 sq mm frlsh havellsslashfinolexslashsbee copper wire 3 core 2point5 sq mm frlshhavellsslashfinolexslashsbee copper wire 3 core4point0 sqmm frlsh havellsslashfinolexslashsbee d p switch 32 amps fslasht lishaslashcona electrical stove with connection wire highco 2 kw electronic open type fan regulatorconaslashlisha exhaust fan 12quatationlightduty almonardslashcrompton exhaust fan lightduty small 230mm almonardslashcrompton exhaust fan pvc 200mm ushaslashhavells fancapacitor 2point5 mfdslashtibconslashindtech fan regulator socket type lishaslashcona hifi 1way switch plate swood holder straight slash bid number gem2025b6441494 dated 11-07-2025 bid document1 71 1 1 holder angle lishaslashconaslashgm, inductionstove electrical prestige cook top 1600 watt, insulation tape achem wonder, led 1 feet tubelightfitting 5w philipsslashhavells, led 2 feet tubelight fitting 9 to 10 watt philipsslashhavells, ledbatte fittings 36w philipsslashhavells, led bulbs0point5 watts wiproslashphilips, led false ceilinground type 20w havells, led focus light 100wphilipsslashwipro, led light 8w leaf junction boxdown light sturlite, led street light fittings 45wphilipsslashwipro, led street light fittings 70 to80w philipsslashwipro, led surface panel light 2x2wiproslashphilips 40 watt white, led tube lightfiitting 4 feet 22w philipsslashhavells, ledtubelight 4 feet 20w retro philipsslashhavells, ledsurface and recess in one size 6hyphen26cmhavells, led par 30 spot light renesola 13 w e273000 k, led recessed 12hyphen15w light round typehavells, led surface light round type 24w havells, mcb 1 pole 20 amps havells euroslash indoasianslash c and s, mcb 1 pole 32 amps havellseuroslash indo asianslash c and s, mcb 2 pole 5hyphen 40 amps havells euroslash indo asianslashc and s, mcb 25a 2 pole havells euroslash indoasianslash c and s, mcb 3 pole 40 amps havellseuroslash indo asianslash c and s, mcb 4 pole 32amps havells euroslash indo asianslash c and s, mcb 4 pole 63 amps havells euroslash indoasianslash c and s, mccb 3 pole 100 amps l and t, mccb 3 pole 250 amps l and t, mccb 3 pole 250 ampsschneider, mccb 3 pole 400 amps schneider, mccb 3pole 400 amps havells, modular bell pushromaslashanchorslashpanasonic, modular pvcbox 12 way romaslashanchorslash panasonic deco, modular pvc box 3 way romaslashanchorslashpanasonic deco, modular pvc box 6 wayromaslashanchorslash panasonic deco, modularpvc plate 3 way romaslashanchorslash panasonicdeco, modular fan regulator socket typeromaslash panasonic, modular socket 16hyphen20amps romaslashanchorslash panasonic, modularsocket 6 hyphen 10 amps romaslashanchorpanasonic, modular switch 10 ampsromaslashanchorslashpanasonic, modular switch20 amps with indicatorromaslashanchorslashpanasonic, modular dp 32amps romaslashanchorslashpanasonic, pedestalfan crompton 450mm storm 2slashorienttornadohyphen2, pvc bend 20mm approved quality, pvc bend 25mm approved quality, pvc c clamps20mm approved quality, pvc c clamps 25mmapproved quality, pvc collar 20mm approvedquality, pvc flexible pipe 20 mm in meters approvedquality, stove coil 7quotation theeta, switch 5amps fslasht lishaslashcona, switch combinedsocket 15 amps with box 5 in 1 lishaslashcona, switch dummy coversromaslashanchorslashpanasonic, teakwoodghatta approved quality, top 5 amps 3 pinlishaslashcona, wall mounting geezer 25 ltrsracoldslashao smith, wall mounting fanindustrialtype 450 mm havells v 3 slash orient tornadowallhyphen2 black, sewage pump 7point5 hp 19meter head 6 inch high head kirlosker, sewage //bid details2 / 71 pump 5 hp 19 meter head 3 inch high head kirlosker, mono block 7point5 centrifugul pump high head 2inch kirlosker, sewage pump besten 1point5 hp 2inch outlet high discharge flot wall kirloskerwith out starter oil cooled, statrer stardelta7point5 hp 25 amps meeco, statrer dol 7point5 hp25 amps meeco, 6 hp 60 stage v 4 submarsible texmoaqua, 40 mm nylon rope, solwet hand operatedcable cutter smdhyphen500 sutting range 400mm2for copper and aluminum cable wire comma3point5kg weight with black handle, bosch gws180hyphenli cordless ngle grinder comma11000 rpm, bosch professional gws 900hyphen100 heavy dutyangle grinder 900 watt power 11000 rpm, copperwire 3 core 1point5 sqmm frlshhavellsslashfinolexslashsbeeee, led surfacepanel light 2x2 wiproslashphilips 40 watt warmwhite

Central Government/Public Sector

TRN :34799116 | 30 Jul, 2025

Tender Value : 0

Kamrup - Assam

Tender for gem bids for replaces glass comma cover comma microscopic commarectangular pv 16442 22x50 mm made of usp no 1 glasspkt of 14 gm, replaces glass comma cover commamicroscopic comma rectangular pv 16446 22x40mm madeof usp no 1 glass pkt of 14 gm, micropipettes comma tipsfor 1 minus200 ul, micropipettes comma tips for 500 minusminus1000 ul, slide comma microscope thickness 1 dot 15mm to 1 dot 35mm size 76mm x 50mm, slide commamicroscope comma thickness 1 dot 15 to 1 dot 35mm size75mm x 25mm, open system device foroocyteslashembryo storage bracket human ivf gradebracket, sticky mats for laboratory bracket human ivfgrade bracket bracket 30 sheet slashmat bracket bracketpack of 10 mats bracket, icsi injecting needle for ivf andicsi holding needle for ivf comma 35 angle bracket fromsame company bracket, 1ml rubber free tuberculin syringesfor ivf embryo transfer, powder free gloves comma latexcomma gamma irridation size 7, 3 ml pipette sterileindividually packed bracket human ivf grade bracket, ultrapure gas in line filters for co2 incubator bracket human ivfgrade bracket, aluminium canes, disposable tips bracket10 to 100 ul bracket individually sterile packed brackethuman ivf grade bracket, disposable tips bracket 100 to1000 ul bracket individually sterile packed bracket humanivf grade bracket, semen collection jar individually sterilepacked for iui, embryo grade water for co2 incubator 2000ml bracket human ivf grade bracket bottle, embryominussafe disinfectant wipes bracket human ivf gradebracket pack of 150, antiseptic spray bracket nonembryoseptic bracket of 1 litre bracket human ivf grade, marker pens for labelling ivf plates bracket nonminusxylene bracket bracket human ivf grade bracket, 35mm x10 mm ivfplates bracket human ivf grade bracket, denudation pipette bracket plastic bracket 300 micronsbracket human ivf grade bracket, 14 ml tube poly roundbottom tubes individually sterile packed for ivf brackethuman ivf grade bracket, semen collection jar sterileindividually packed bracket 110ml bracket bracket humanivf grade bracket, denuding pipette bracket 170 minus175bracket microns plastic bracket human ivf grade bracket, 11 ml conical tube bracket ivf grade bracket, 1 dot 8 mlcryo tube vial bracket ivf grade bracket, transducer probecover individually sterile packed bracket 70mm bracket, 100 percent ehanol, kim wipes disposables wipers bracketl x w 4 1 by 2 in x 8 1 by 2 in bracket pack of 500 wiper, iui kit single density bracket 2 centrfuge tubes comma 2pipettes comma one iui cannula comma one semencollection jar bracket ivf grade, fertilization media, cleavage media, embryo grade oil, sperm preparationmedia, flushing media with proteins, blastocyst culturemedia, 45 percent density gradient sperm preprationmedia, 90 percent density gradient sperm preprationmedia, hydase, pvp media, high quality disposable slidefor semen anlysis for ivf, embryo transfer mediabracket embryo glue bracket, oocyte activate mediaionophore bracket, sperm freezing media 10, singlestep media a fertilization media150ml b embro culturemedia 150ml d embryo grade oil 500ml d flushing mediawith protein 150ml sperm preparation media 300ml

Central Government/Public Sector

TRN :34790390 | 30 Jul, 2025

Tender Value : 0

Bangalore - Karnataka

Tender for gem bids for aluminium alloy connector olive drab chromate overcadmium plated straight 3 pin female connector, aluminium alloy connector olive drab chromate overcadmium plated with right angled adopter assy withprotective cap, aluminium alloy connector olive drabchromate over cadmium plated with straight adopter assywith protective cap, aluminium alloy connector olive drabchromite over cadmium plated straight 7 pin socket female with adopter and bush ring, binding wire atc 0 5 mm dia, boot heat shrinkable strain relief straight withadhesive property 202k 132 raychem, boot heatshrinkable strain relief straight with meltable inner walladhesive properties 202 k 132 raychem h, boot heatshrinkable strain relief straight with meltable innerwalladhesive properties 202 k 121 raychem h, boot heatshrinkable strain relief straight with meltable innerwalladhesive properties 202 k 142 raychem h, boot heatshrinkable strain relief straight with meltable innerwalladhesive properties 202 k 153 raychem h, boot heatshrinkable strain relief t connectivity with meltable innerwall for adhesive properties 301 a 022 raychem, boot heatshrinkable strain relief t transission with meltable innerwalladhesive properties 301 a 022 raychem, boot heatshrinkable strain relief t transission with meltable innerwalladhesive properties 301 a 034 raychem, boot heatshrinkable strain relief t transission with meltable innerwalladhesive properties 322 a 112 raychem, boot heatshrinkable strain relief y trasission straight with meltableinnerwall adhesive properties 382 a 012 raychem h, braid tinned copper 16 x 24mm size , braid tinnedcopper 24 x 30mm size , braid tinned copper 10 x16mm, braid tinned copper 12 x 20 mm, braid tinnedcopper 6 x 10 mm, clamp asper drg no a4 515 smp 56173 /bid number: gem/2025/b/6283887* /dated: 09-07-2025 & & / bid document1 / 41, elect cable copper multi strands silver coated ptfeinsulated shielded screened over ptfe jacketed 7 by 0 21 0 25 sq mm , elect cable copper multi strands silvercoated ptfe jacketed scd 19 by 0 15 0 35 sq mm , electrical cable copper multi strands hook up wire outer dia0 35 sq mm 0 35 sq mm 22 awg , electrical cablecopper multi strands silver coated ptfe insulated shieldedover ptfe jacket white wire outer dia 1 82 mm 7 by 0 21 0 24 sq mm , electrical cable copper multi strandssilver coated ptfe insulated shielded over ptfe jacket whitewire outer dia 2 3mm 18 by 0 19 0 51 sq mm , electrical cable copper multi strands silver coated ptfeinsulated shielded screened over ptfe jacketed 7 by 0 21 0 25 sqmm , heat shrink sleeve black dr 25raychem dr 25 1 by 2 25 0, heat shrink sleeve blackdr 25 raychem dr 25 3 by 4 25 0, heat shrinksleeve black dr 25 raychem dr 25 3 by 8 25 0, heat shrink sleeve clear id 3 x 0 5 thk mm, heat shrinksleeve clear 10 by 20 mm, heat shrink sleeve clear 5 by 10mm, heat shrink sleeve yellow 10 by 20 mm, heat shrinksleeve yellow 5 by 10 mm, heat shrinkable sleeve clear 10by 5 mm, heat shrinkable sleeve clear 18 by 9 mm, heatshrinkable sleeve clear id 3 x 0 5 thk, heat shrinkablesleeve yellow 10 by 5 mm, heat shrinkable sleeve yellow18 by 9 mm, iso propile alcohal, marker pen black, plasticcover 802 microns 18 inches x 18 inches, pvc insulationtape 15 x 0 2mm thk black, pvc tape insulation black 15x 0 2mm thk, quick fix tube 15 ml, solder flux, soldersoft sn 63 percent pb 37 percent, stainless steel clamp forbraid crimping asper drg no a4 515 smp 54357, transparent poly prop aline film, transparent polypropeline film tape standard size 1 by 2 inchesaluminium alloy connector olive drab chromate overcadmium plated straight 3 pin female connector withstraight adopter assy with protective cap con no - bli srj12319 x w 1044 amphinol based on sample & drg, aluminium alloy connector olive drab chromate overcadmium plated with right angled adopter assy withprotective cap con no - ams 108e 10 sl - 35 1044 3 pinright angled adopter assy amphinol bli arp 10329xw -21047 based on sample & drg, aluminium alloy connectorolive drab chromate over cadmium plated with right angledadopter assy with protective cap con no - d 38999/26-w-d-19 pn 1047 19 pin male connector with right angledadopter assy no amphinol sliarl 14349xw 1045 based onsample & drg, aluminium alloy connector olive drabchromate over cadmium plated with straight adopter assywith protective cap con no - d 38999/26-w-e-26 pn 104426 pin male plug connector with straight adopter assy noamphinol bli srl 16369xw 1043 based on sample & drg, aluminium alloy connector olive drab chromite overcadmium plated straight 7 pin socket female with adopter& bush ring, pvc protective cap. d38999/26 w-b-99sn 7pin female connector bl1 srl 10339 x w-14-1046 jss no- 50860, asper sample & drg, binding wire atc 0.5 mm dia, boot heat shrinkable strain relief straight with adhesiveproperty 202k 132 raychem, boot heat shrinkable strainrelief straight with meltable inner wall adhesive properties202 k 132 raychem h asper sample & drg, boot heatshrinkable strain relief straight with meltable innerwalladhesive properties 202 k 121 raychem h asper sample &drg, boot heat shrinkable strain relief straight with meltableinnerwall adhesive properties 202 k 142 raychem h aspersample & drg, boot heat shrinkable strain relief straight withmeltable innerwall adhesive properties 202 k 153 raychem

Central Government/Public Sector

TRN :34792340 | 30 Jul, 2025

Tender Value : 0

East Khasi Hills - Meghalaya

Tender for gem bids for cp bib tap 15 mm, app based polymer membrance 1 mmthick, cp soap dish, pvc low level flushing cistern10 ltrcapacity dual flush, cp pillar tap15 mm, cp stop cock15mm, cp health faucet with hook and 1 point 5m longtube, cp angle stop cock 15mm, cp centre hole wash basinmixture hot and cold 15mm, mirror looking l 600 mm andw 450mm with frame, cp bip tap 15mm 2 way double handwith flange, pvc seat cover white for anglo indian type wc, cp towel ring, gun metal gate valve brass 20mm, pvcfloat valve with rod and ball 20mm, cp bib cock long body15mm, stainless steel kitchen plate rack size l30 inch w30 inch and dia10 inch, stainless steel kitchen plate racksize l 30 inch w 24 inch and dia 10 inch, pvc connectionpipe 15 mm dia 600 mm long with two nos coupling, stainless steel kitchen sink with single bowl l 24 and w 18, gun metal gate valve brass 15 mm dia, pvc connectionpipe 15mm dia 450mm long, pvc angle stop cock 15mmdia, pvc bip cock 15mm short body, synthetic enamelpaint black colour, aluminium floor door stopper double, primer red oxide, paint og green, bend pipe pvc 32mmdia for low level flushing cistern, synthetic enemelled paintgrey, sharpi flood light 280 watt, led water proofed focusdj light 200 watt, enamel, synthetic, exterior a undercoating b finishing paint v3 confirming to is 2932 q3

Related Searched Keywords : aluminium angle

List of aluminium-angle Tenders

Tender for gem bids for aluminium edge angle

Tender for supply of aluminium angle silky white anodized.

Tender for supply of aluminium angle moulding 30 x 30 x 1.5 x 2000 mm..

Get aluminium angle Tender Alert...

Related Searched Keywords : aluminium angle

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us