Filters

List of alluminium section Tenders

List of latest alluminium section Tenders in Indian Tenders. Click on any alluminium section Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for alluminium section Tenders.

All-Tenders (340)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

corporations/Associations/Others

TRN :35786049 | 24 Nov, 2025

Tender Value : 15.57 Lacs

Rajkot - Gujarat

Tender for special repairs to police staff qtrs. b-cat. block no-15 ground floor qtr. no 61 to 64 and fixing of alluminium section windowthree trackin block no-15 first and second floorqtr. no 65 to 72 in srp gr-viii at gondal, including electric work sbd 2024-25

corporations/Associations/Others

TRN :35934811 | 27 Nov, 2025

Tender Value : 33.01 Lacs

Madurai - Tamil Nadu

Tender for external painting aluminium work renovation of lobby area e-tender for periodical external painting, aluminium work, renovation of lobby area at divisional office building madurai

State Government

TRN :35935136 | 02 Dec, 2025

Tender Value : 7.99 Lacs

Gandhi Nagar - Gujarat

Tender for providing and fixing aluminium slim series for internal partitions and doors in e7 -8 at nid ahmedabad

State Government

TRN :35935495 | 29 Nov, 2025

Tender Value : 9.99 Lacs

Sriganganagar - Rajasthan

Tender for gp bahrampurabodla rajiv gandhi sewa kender vistar kary furniture kursi and aluminium gate and partition rang rogan etc work

Central Government/Public Sector

TRN :35935752 | 08 Dec, 2025

Tender Value : 43.66 Lacs

Visakhapatnam - Andhra Pradesh

Tender for as and as to wooden doors with aluminium doors, tiling work, internal and external painting, replacement of window in p-32 building of submarine school at ins satavahana

Central Government/Public Sector

TRN :35936100 | 08 Dec, 2025

Tender Value : 0

Bangalore - Karnataka

Tender for addn/altn to externals at various md accn phase-1 and its lodger unit and provn of aluminium cubicles with work station for dental offrs and for server at afids at chafb

Central Government And Public Sector

TRN :35936348 | 04 Dec, 2025

Tender Value : 0

Varanasi - Uttar Pradesh

Tender for supply of aluminium lugs flat type,

Central Government/Public Sector

TRN :35936719 | 24 Nov, 2025

Tender Value : 0

Alwar - Rajasthan

Tender for speed breaker v2 q3, road barrier q3, supply andfix solar cat eye aluminium alloy shall of size 125mm x 125mm x25mm shank 65mm of high efficiency mono rystafiesolar panel, supply and fixing cat eye solar reflective typeof metal body alloy of size 100mm x100mm x20mm withpama striplens reflector, supply and fixing metal tubulardelineator made out of abs round body fitted with 2 nos 65mm out of abs round body fitted with 2 nos 65 mm of absround body fitted with 2 nos. 65mm, supply and fixing inrepair solar delineator, 1000 mm long flashing rate 30 timesper minute. electronically operated with solar cells, batteryni-cd 1.2 v, bottom frame aluminium., supply and fixing inrepair of 3mm thick aluminium composite panel acp boardof size 4 inch x 5 inch n.exc 20 sqft fixed on both sidesboard shall be rectangular or pentagular shape ., supplyand fixing in repair road traffic informing convex mirror 100cm of polycarbonate material on road junction and cornerswith adjustable brackets complete all as specified anddirected., supply and fixing in repair road sign board suchas regulatory sign equilateral triangular shape of 400mm x400mm made up of 2 mm thick aluminium sheet., supplyand fixing in spring post made of special pu, polyurethanematerial of dia 80mm tape size 80mm height 800mm andbase dia 200 mm complete all as specified and directed., supply and fixing ultra flex post wt 1350 gms complete andall as specified and directed., supply and fixing guide postbollard of height 800 mm fitted with reflector 100mm dia onboth faces made of hdpe materials and wt 1230 gmcomplete and all as specified and directed., supply andfixing rumble strips made out of pu material weight 480gms height 15mm length 500mm complete all as specifiedand directed., supply and fixing ldpe traffic cones of ht750mm weight 4.50 kg base size 395mm x 395mm heavybase complete all as specified and directed., supply andfixing delinators of ht 177.50 mm and 100 mm reflector diaof wt 170 gms complete and all as specified and directed., supply and fixing delinators 100 mm dia made of highreflectors made out of pmma and mounted on ms pipe of50mm powder coated anti rust and anti theft steel., supplyand fixing yellow coloured pole mounted solar blinker of 300mm diameter powered by solar panel 12v and 40w.

State Government

TRN :35936970 | 25 Nov, 2025

Tender Value : 23.30 Lacs

Kota - Rajasthan

Tender for excavation for structures earthwork in excavation for structures as per drawing and morth specifications clause 304.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. ordinary soil upto 3 m depth providing concrete for plain/reinforced concrete in open foundations complete as per drawings and morth specifications clause 1702, 1703, 2102 & 2104 p.c.c grade m 10 nominal mix 1:3:6 providing concrete for plain/reinforced concrete in open foundations complete as per drawings and morth specifications clause 1702, 1703, 2102 & 2104 r.c.c grade m 20 supplying, fitting and placing hysd bar reinforcement in foundation complete as per drawings and morth specifications clauses 1009,1600 and 2102 plain/reinforced cement concrete in substructure complete as per drawings and morth specification clauses 1700 and 2200 for height upto 5 m r.c.c grade m 20 plain/reinforced cement concrete in substructure complete as per drawings and morth specification clauses 1700 and 2200 for height upto 5 m r.c.c. grade m 25 supplying, fitting and placing hysd bar reinforcement (fe 415) in substructrue complete as per drawings and morth specification clauses 1009,1600 & 2202 providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia ac pipe extending through the full width of the structures with slope of 1(v):20(h) towards drawing face complete as per drawing and morth specification clauses 1409, 2204.4, 2206.4 & 2706 providing and laying reinforced cement concrete in superstructure as per drawing and morth specifications clauses 1700, 2302 and 2304 r.c.c. grade m 30 supplying, fitting, and placing hysd bar reinforcement in superstructure complete as per drawing and morth specifications clauses 1009,1600 and 2302 providing and laying cement concrete wearing course m 30 grade including reinforcement complete as per drawing and morth specifications clauses 1700 and 2702.2 providing and fixing 20 mm thick compressible fibre board in expansion joint complete as per drawing and morth specifications clause 2604 providing and fillling joint sealing compound as per drawings and morth specifications with coarse sand and 6 per cent bitumen by weight clause 2604 drainage spouts complete as per drawing and morth specifications clause 2705 providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and morth specification clause 2204.6 & 2504.2.2 backfilling behind abutment, wing wall and return wall complete as per drawings & morth specification clause 304.3.7 & 2204.6 granular material supply & fixing of flood gauge (water gauge) as per i.r.c. 67 standard 200 cm long fixed on angle iron posts 50x50x6 mm, 2.6 m. long. construction of embankment with material obtained from borrow pits construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300-1 and 300-2 with a lead upto 50 m as per morth specification clause 305 granular sub-base with close graded material (table:- 400-1) plant mix method providing laying spreading and compacting specified graded sand, gravel (crushed stone) as per table 400-1,400-2 or any other course material as per design mix, as per cbr in sub base course including premixing the material at omc in wet mix plant, carriage of mixed material spreading in uniform layers with motor grader f.e loader on a prepared base and compacting with vibratory roller to achieve desired density (as per i.s.2720) including all material, labor, machinery, lighting guarding, barricading and maintenance of diversion complete.[morth specification : clause 401]. by mechanical means. for grading-ii material dry lean cement concrete construction of dry lean cement concrete sub- base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing. construction of un-reinforced , plain cement concrete pavement m30 (grade), thickness as per design, over a prepared sub base, with 43/53 grade cement as per clause 602, coarse and fine aggregates conforming to is:383, maximum size of coarse aggregate not exceeding 31.5 mm, mixed in a in fully automatic batching plant and transported to site in transit mixer for having continuous agitated mixer, manufactured as per approved mix design including pumping of r.m.c. from transit mixer to site of laying , with all lead and lift including cost of admixtures in recommended portion as per is 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of engineer in charge laid with a fixed form paver (laying and fixing of 150 micron thick polythene film and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days using water finishing to lines and grade as per drawing and morth specification clause 602 including vaccum dewatering process with all required equipments (dowel bars will be paid seprately). painting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new, plastered / concrete surfaces as per drawing and morth specification clause 801 providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 801.3.1 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and morth specification clause 801 800 mm x 600 mm rectangular pali to neemkhera via hanaheri km. 4/100

State Government

TRN :35937344 | 25 Nov, 2025

Tender Value : 15.80 Lacs

Kota - Rajasthan

Tender for providing laying spreading and compacting specified graded sand, gravel (crushed stone) as per table 400-1,400-2 or any other course material as per design mix, as per cbr in sub base course including premixing the material at omc in wet mix plant, carriage of mixed material spreading in uniform layers with motor grader f.e loader on a prepared base and compacting with vibratory roller to achieve desired density (as per i.s.2720) including all material, labor, machinery, lighting guarding, barricading and maintenance of diversion complete.[morth specification : clause 401]. by mechanical means. for grading-ii material construction of dry lean cement concrete sub- base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing. construction of un-reinforced , plain cement concrete pavement m30 (grade), thickness as per design, over a prepared sub base, with 43/53 grade cement as per clause 602, coarse and fine aggregates conforming to is:383, maximum size of coarse aggregate not exceeding 31.5 mm, mixed in a in fully automatic batching plant and transported to site in transit mixer for having continuous agitated mixer, manufactured as per approved mix design including pumping of r.m.c. from transit mixer to site of laying , with all lead and lift including cost of admixtures in recommended portion as per is 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of engineer in charge laid with a fixed form paver (laying and fixing of 150 micron thick polythene film and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days using water finishing to lines and grade as per drawing and morth specification clause 602 including vaccum dewatering process with all required equipments (dowel bars will be paid seprately). providing and fixing of dowel bars of mild steel confirming to is : 432 of specified length and diameters as per morth specification irc 15 & 58 including cutting, placing in position across transverse joint with proper spacing, providing with pvc sleeve complete as per drawing, technical specification and as per direction of the engineer-in-charge. construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300-1 and 300-2 with a lead upto 50 m as per morth specification clause 305.3 supply & fixing of flood gauge (water gauge) as per i.r.c. 67 standard 200 cm long fixed on angle iron posts 50x50x6 mm, 2.6 m long providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per irc:67 made of encapsulated lens type reflective sheeting vide clause 801.3.1 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with m15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and morth specification clause 801 800 mm x 600 mm rectangular painting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new, plastered / concrete surfaces as per drawing and morth specification clause 801 excavation for structures earthwork in excavation for structures as per drawing and morth specifications clause 304.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. ordinary soil upto 3 m depth providing concrete for plain/reinforced concrete in open foundations complete as per drawings and morth specifications clause 1702, 1703, 2102 & 2104 p.c.c grade m 10 nominal mix 1:3:6 providing concrete for plain/reinforced concrete in open foundations complete as per drawings and morth specifications clause 1702, 1703, 2102 & 2104 r.c.c grade m 20 supplying, fitting and placing hysd bar reinforcement in foundation complete as per drawings and morth specifications clauses 1009,1600 and 2102 chhabra jharkheri mandkho km. 3/400

Related Searched Keywords : alluminium section

List of alluminium section Tenders

Tender for special repairs to police staff qtrs. b-cat. block no-15 ground floor qtr. no 61 to 64 and fixing of alluminium section windowthree trackin block no-15 first and second floorqtr. no 65 to 72 in srp gr-viii at gondal, including electric work sbd 2024-25

Tender for external painting aluminium work renovation of lobby area e-tender for periodical external painting, aluminium work, renovation of lobby area at divisional office building madurai

Tender for providing and fixing aluminium slim series for internal partitions and doors in e7 -8 at nid ahmedabad

Tender for gp bahrampurabodla rajiv gandhi sewa kender vistar kary furniture kursi and aluminium gate and partition rang rogan etc work

Tender for as and as to wooden doors with aluminium doors, tiling work, internal and external painting, replacement of window in p-32 building of submarine school at ins satavahana

Tender for addn/altn to externals at various md accn phase-1 and its lodger unit and provn of aluminium cubicles with work station for dental offrs and for server at afids at chafb

Tender for supply of aluminium lugs flat type,

Get alluminium section Tender Alert...

Related Searched Keywords : alluminium section

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us