Filters

List of latest acrylic-item Tenders in Indian Tenders. Click on any acrylic-item Tenders to view BOQ, NIT and Tender Documents. Get Bidding Support and Vendor Registration for acrylic-item Tenders.

All-Tenders (37)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :18720418 | 11 Aug, 2020

Tender Value : 0

Chennai - Tamil Nadu

Tender for supply of acrylic square box for coach model scale 1:100 drawing no icf/j & t/misc/2823 as per specification: 1. the box for coach model is to be made by poly acrylic clear sheet as per enclosed drawing. 2. the acrylic sheet used for box manufacturing should be of commercial quality category -1 best quality sheet and finish - 1 smooth or polished. 3. critical dimensions like inside length and width of the box shall be strictly maintained as per drawing attached. 4. outer surface must be free from dent or scratch. 5. in case of any clarification regarding the items, the sample pieces are available in mms/ttc.

Central Government / Public Sector

TRN :18722790 | 12 Aug, 2020

Tender Value : 0

Secunderabad - Telangana

Tender for supply of set of display boards.set consists of following two items. 1. golden colour vinyl letters cutting and pasting for the smm office incumbency board in bilingual. approximately 4sft. 01 no. 2. smm office name indication board brand new of 5mm acrylic of 15 inch x 9 inch both sides with led lighting with in&out indication in green and red light respectively 01 no. note: firm shall mention hsn code for the tendered item along with offer.

Central Government/Public Sector

TRN :18677126 | 12 Aug, 2020

Tender Value : 37.79 Lacs

New Delhi - Delhi

Tender for supply of mta items- 2.5 kva genr set yamaha sparking plug make- yamaha for: batote starting rope assy make- yamaha for: batote 3kva honda genr set spark plug make-honda for: batote rope bucket make-honda for: batote fuel filter make-honda for: batote chock cable comp make-honda for: batote element ac make-honda for: batote fuel filter comp make-honda for: batote fuse blade 1a make-honda for: batote head gasket make-honda for: batote tappered paking make-honda for: batote air filter element make-honda for: batote oil filter make-honda for: batote piston ring make-honda for: batote carburetor air filter make-honda for: batote carburettor assy make-honda for: batote 5kva genr set kirloskar cell make-kirloskar for: batote oil filter make-kirloskar for: batote fuel filter make-kirloskar for: batote fuel flexible pipe tank to filter make-kirloskar for: batote fuel pipe assy filter to pump make-kirloskar for: batote air filter make-kirloskar for: batote air cleaner make-kirloskar for: batote air filter element make-kirloskar for: batote pad anti vibration mounting make-kirloskar for: batote avr make-kirloskar for: batote ignition key make-kirloskar for: batote bush holder set make-kirloskar for: batote bush holder insulator rod make-kirloskar for: batote self stater pinion make-kirloskar for: batote alternator regulator make-kirloskar for: batote alternator fan belt make-kirloskar for: batote fuel filter primary make-kirloskar for: batote fuel filter secondary make-kirloskar for: batote fan belt a54 make-kirloskar for: batote exhaust mainfold make-kirloskar for: batote exhaust extension make-kirloskar for: batote expansion below make-kirloskar for: batote fuel pump element make-kirloskar for: batote stop solenoid assy make-kirloskar for: batote l o gear pump sr with relief valve make-kirloskar for: batote fuel pump with over lead stopper make-kirloskar for: batote nozzle assy mico make-kirloskar for: batote large end bearing set make-kirloskar for: batote inlet valve make-kirloskar for: batote exhaust valve make-kirloskar for: batote cylinder liner make-kirloskar for: batote piston assembly make-kirloskar for: batote voltmeter make-kirloskar for: batote ampear meter make-kirloskar for: batote elect oil pressure gauge make-kirloskar for: batote ractifier service kit consists surge compressor, forward & reverse set 25mm for: batote ignition switch make-kirloskar for: batote piston ring make-kirloskar for: batote oil pump make-kirloskar for: batote oil seal fly wheel make-kirloskar for: batote cyl head gasket make-kirloskar for: batote fuel filter assy make-kirloskar for: batote push rod oil seal make-kirloskar for: batote fan belt make-kirloskar for: batote bty 12v 88ah make-luminous/amaron for: batote recharable bty 12v 120ah luminus/amaron for: batote 5.5 kva genr set kirloskar air filter element make-kirloskar for: batote 6 kva genr set kirloskar oil filter make-kirloskar for: batote fuel filter make-kirloskar for: batote air cleaner element make-kirloskar for: batote pump element make-kirloskar for: batote sleev assy make-kirloskar for: batote valve inject & eject make-kirloskar for: batote big and cell beraring make-kirloskar for: batote chest cover seal make-kirloskar for: batote anabond tube for: batote pull and push rod seal up & down make-kirloskar for: batote cyl head guide make-kirloskar for: batote cyl head seat set make-kirloskar for: batote cyl cover gasket make-kirloskar for: batote exhuast mani fold gasket make-kirloskar for: batote high pressure line make-kirloskar for: batote injector seat make-kirloskar for: batote 18mm nut for: batote tappet cover gasket make-kirloskar for: batote fuel rod oil seal make-kirloskar for: batote fuel flexible pipe make-kirloskar for: batote connecting rod with bolt and bush make-kirlosker for: batote cell make-kirloskar for: batote sim crank shaft make-kirloskar for: batote shim injector make-kirloskar for: batote oil seal make-kirloskar for: batote binju nut with washer 10 nos make-kirloskar for: batote piston make-kirloskar for: batote piston ring make-kirloskar for: batote bush make-kirloskar for: batote air filter make-kirloskar for: batote oil filter make-kirloskar for: batote fan belt make-kirloskar for: batote 12.5 kva genr set kirloskar bush make-kirloskar for: batote bush plate make-kirloskar for: batote fan belt make-kirloskar for: batote 15 kva genr set kirloskar armature rewinding for: batote fuel filter make-kirloskar for: batote fuel pipe tank to tank unit make-kirloskar for: batote fuel pipe tank to fuel pump make-kirloskar for: batote fuel pipe feed pump to filter make-kirloskar for: batote fuel pipe fuel filter to fuel pump make-kirloskar for: batote anti vibration mounting for engine make-kirloskar for: batote anti vibration mounting for alternate make-kirloskar for: batote set screw 50.003.10.035 for: batote set screw 50.003.12.035 for: batote belt avx 10 1500 sp for: batote fire oil seal housing with cr make-kirloskar for: batote seal make-kirloskar for: batote oil seal make-kirloskar for: batote bty 12v 88ah make-luminous/amaron for: batote bty 12v 150ah luminous/amaron for: batote rectifier service kit make-kirloskar for: batote fuel pupe t type make-kirloskar for: batote fuel flexible pipe make-kirloskar for: batote oil filter make-kirloskar for: batote injector nozzle make-kirloskar for: batote air cleaner house make-kirloskar for: batote oil pressure guage make-kirloskar for: batote banjo bolt make-kirloskar for: batote banjo washer make-kirloskar for: batote stopper solenoid switch make-kirloskar for: batote bty 12v 130ah luminous/amaron for: batote bty 12v 88ah make-luminous/amaron for: batote high pressure pipe make-kirloskar for: batote volt meter make-kirloskar for: batote amp mtr make-kirloskar for: batote feed pump assy make-kirloskar for: batote air filter make-kirloskar for: batote fuel filter assy make-kirloskar for: batote push rod oil seal make-kirloskar for: batote oil seal fly wheel make-kirloskar for: batote all gasket set make-kirloskar for: batote head gasket cylinder make-kirloskar for: batote tappet cover gasket make-kirloskar for: batote fan belt make-kirloskar for: batote fan belt a-53 make-kirloskar for: batote exhaust fan make-kirloskar for: batote oil filter element make-kirloskar for: batote piston make-kirloskar for: batote piston ring make-kirloskar for: batote valve seal inlet & exhaust make-kirloskar for: batote valve guide with valve lock make-kirloskar for: batote valve seat make-kirloskar for: batote trust washer make-kirloskar for: batote oil pressure gauge make-kirloskar for: batote push rod tube seal uppar make-kirloskar for: batote cylider head make-kirloskar for: batote cylinder bore make-kirloskar for: batote fip make-kirloskar for: batote cylinder head gasket make-kirloskar for: batote engine gasket comp set make-kirloskar for: batote fuel pipe filter to fip make-kirloskar for: batote oil pressure pipe make-kirloskar for: batote benjo washer 10 nos make-kirloskar for: batote oil filter cartridge make-kirloskar for: batote fuel pr filter insert water separator make-kirloskar for: batote copper washer 17mm make-kirloskar for: batote copper washer 19mm make-kirloskar for: batote joint for inlet mainfold make-kirloskar for: batote joint for exhaust mainfold make-kirloskar for: batote nozzle leak off pipe make-kirloskar for: batote fuel pipe return make-kirloskar for: batote spin on filter for lubricating oil make-kirloskar for: batote air cleaner filter make-kirloskar for: batote head gasket make-kirloskar for: batote 30kva genr set kirloskar air cleaner filter inner filter make-kirloskar for: batote air filter outer make-kirloskar for: batote sealing ring top make-kirloskar for: batote bty terminal lead make-kirloskar for: batote fuel filter element make-kirloskar for: batote silencer make-kirloskar for: batote radiator in/out hose pipe make-kirloskar for: batote fuel filter primary filter make-kirloskar for: batote cylinder head gasket make-kirloskar for: batote bty 12v180ah luminus/amaron for: batote avr make-kirloskar for: batote pump element make-kirloskar for: batote fuel pipe make-kirloskar for: batote oil filter make-kirloskar for: batote fan belt make-kirloskar for: batote tappet gasket make-kirloskar for: batote fuel flexible pipe make-kirloskar for: batote air cleaner assy make-kirloskar for: batote b&r items water proofing bitumen felt roll self finished felt hessian base for water proofing grade i conforming to is-1322-1982 of size 20m x 0.90m weight of each roll shall not be less than 42.50 kgs + 2.5 kgs in dry conditions. the finished material shall be free from visible external defect such as holes, oil patches, ragged or untrue edges, brakes, cracks, tears, protuberances and indentations. make iwl/ sikka/ aqua polymers/ dwi. for: batote bed cushion having density of 40 kg/m3 &n 80 mm thick covered with high quality rexin for: batote acrylic sheet solid transparent of size 4x4x3 mm thick make-duratuff/lexan/vmt plastic ltd/ms loxwell for: batote punched tape concertina coil including spike and handle with 50 turns and dia 1050 mm, having a 2.60 mm core wire of high carbon spring steel of high tensile strength. the punched tape and core wire are electro galavanised to provide protection against out door exposure .the punched tape is mechanically crimped over the core wire and then formed into a coil at various parts of the 9 mm and for: batote barbed wire 2.24 mm dia, minimum length of 450 in 50 kgs of roll, galvanized barbed wire shall be of 2 line strands for: batote thinner make-j&n/asian paint/berger nerolac ist quality for: batote factory made solid pannel pvc door of size 0.77x2.9mtr and 30 mm thickness including hinges 100 mm long for each pvc door shall be provided 02 nos of aluminium tower bolt 150 mm long and 02 nos of aluminium bow handle 150 mm long shall be provided. make- rajshree/sintex for: batote hydraulic door closer complete make-godrej/amar/master/everest/priya for: batote sliding bolt 8 long for: batote tower bolt 8 long for: batote door stopper complete make-godrej/amar/master/everest/priya for: batote door spring for: batote bow handle make-godrej for: batote ms hinges 3 long for: batote ms hinges 4 long for: batote synthetic enamel paint, colour blue make:- asian / berger/shalimar/nerolac ist quality packing-1 ltr, 4 ltr, 10 ltr for: batote synthetic enamel paint, colour yellow make:- asian / berger/shalimar/nerolac ist quality packing-1 ltr, 4 ltr, 10 ltr for: batote synthetic enamel paint, colour olive green make:- asian / berger/shalimar/nerolac ist quality packing-1 ltr, 4 ltr, 10 ltr for: batote oil bound distemper, colour-white. make: -nerolac / berger / asian. packing-1 ltr, 4 ltr, 10 ltr for: batote synthetic enamel paint, colour brown make:- asian / berger/shalimar/nerolac ist quality packing-1 ltr, 4 ltr, 10 ltr for: batote synthetic enamel paint, colour white make:- asian / berger/shalimar/nerolac ist quality packing-1 ltr, 4 ltr, 10 ltr for: batote synthetic enamel paint, colour red make:- asian / berger/shalimar/nerolac ist quality packing-1 ltr, 4 ltr, 10 ltr for: batote synthetic enamel paint, colour black make:- asian / berger/shalimar/nerolac ist quality packing-1 ltr, 4 ltr, 10 ltr for: batote synthetic enamel paint, colour bus green make:- asian / berger/shalimar/nerolac ist quality packing-1 ltr, 4 ltr, 10 ltr for: batote red oxide primer. make:- asian / berger/shalimar /nerolac. packing-1 ltr, 4 ltr, 10 ltr for: batote galvanised steel sheet of 0.63 mm thick of size 8x3 with grade of zinc coating 275 gm/sqm. make - sail/ tata/ jsw steel. for: batote galvanised steel sheet of 0.63 mm thick of size 10x3 with grade of zinc coating 275 gm/sqm. make - sail/ tata/ jsw steel. for: batote galvanised steel sheet of 0.63 mm thick of size 12x3 with grade of zinc coating 275 gm/sqm. make - sail/ tata/ jsw steel. for: batote hdpe sand bag khaki unproofed item no w8/wa-8015-000196 and specification no ind/tc 2028 and as per sample minimum weight of each bag should not be less than 75 gm. for: batote commercial plywood bwp of size 6x3x6mm thick. make century/green ply/dura ply. for: batote commercial plywood bwp of size 6x3x8mm thick. make century/green ply/dura ply. for: batote commercial plywood bwp of size 6x3x12mm thick. make:- make century/green ply/dura ply. for: batote commercial plywood bwp of size 8x4x6mm thick make century/green ply/dura ply. for: batote commercial plywood bwp of size 8x4x8mm thick make century/green ply/dura ply. for: batote commercial plywood bwp of size 8x4x12mm thick make century/green ply/dura ply. for: batote ms round wire nails 1 for: batote ms round wire nails 2 for: batote ms round wire nails 2.5 for: batote ms round wire nails 3 for: batote ms round wire nails 4 for: batote ms round wire nails 6 for: batote j hook 250mm long with waher for: batote white cement. make : birla / jk for: batote wall putty make:- birla white/nerolac/jk cement/beger paint for: batote glass putty. make:-bawa/golden. for: batote m-seal 100g in each pkt. make : pedilite. for: batote screw 1 with star top each pkt 1000nos for: batote self tapping screw 35 mm long with rubber washer each pkt 250 nos for: batote self tapping screw 50 mm long with rubber washer each pkt 250 nos for: batote self tapping screw 68 mm long with rubber washer each pkt 250 nos for: batote self tapping screw 100 mm long with rubber washer each pkt 250 nos for: batote gi ceiling angle 12 long for: batote ceramic coloured tiles of square of size 300x300x7mm thick any approved colour for flooring . make - johnson/ kajaria/ orient/bell/ somany. for: batote vitrified coloured tiles 10mm thick, square, of size 600 x 600mm of any approved colour. make -johnson/ kajaria/ orient/ somany for: batote gi binding wire 0.9 mm dia. for: batote insulation tape 9mtr long make - anchor for: batote hinges 4 long for: batote long angle iron picket 10 long. make. sail/tata/jindal/kamdhenu. for: batote alam for sedimantation for: batote paint brush 2. make: super horse / horse gold / horse 7 / kirpal for: batote paint brush 4. make: super horse / horse gold / horse 7 / kirpal for: batote window glass 2.1 x 1.9 long 3mm thick transparent. make:- atul/swastic/saint gobaint/modiguard. for: batote silicon gel 280ml make: dr fixit for: batote synthetic enamel paint, colour shade enemal make:- asian / berger/shalimar/nerolac ist quality for: batote e&m items pvc casing and capping of size 25mm. make: presto plast / press fit / akg / sunco/daulpin. for: batote pvc casing and capping of size 32mm. make: presto plast / press fit / akg / sunco/daulpin. for: batote pvc casing and capping of size 40mm. make: presto plast / press fit / akg / sunco/daulpin. for: batote led bulb 5w. syska/ havells/ phillips/ bajaj./crompton for: batote led bulb 7w. syska/ havells/ phillips/ bajaj.crompton for: batote led bulb 9w. syska/ havells/ phillips/ bajaj.crompton for: batote led bulb 15w. syska/ havells/ phillips/ bajaj.crompton for: batote led bulb 20w. syska/ havells/ phillips/ bajaj./crompton for: batote flood light led type 50 watt of 6300 k make:-philips/havells/c&g/syska/crompton for: batote tube light fittings 18/20 w with minimum 1800/ 2000 lm with polly carbonated housing and cover, 6000k, 4 feet long including 18/20 w tube rod, decorative ultra slim linear led lighting fixture frame etc complete . make: c&s/ syska/ phillips/ havells/ bajaj /crompton for: batote tube light fittings 18/20 w with minimum 1800/ 2000 lm with polly carbonated housing and cover, 6000k, 2 feet long including 18/20 w tube rod, decorative ultra slim linear led lighting fixture frame etc complete . make: c&s/ syska/ phillips/ havells/ bajaj /crompton for: batote tube rod lamp 4 tl -36w star make: hpl/ philips /surya /wipro/cromption greaves. for: batote bulk head fitting 9 watt led type with 9 watt led, clear prismatic diffuser, 6000k ip65 bulkhead luminaire with opal diffuser. make: syska/ c&s / phillips/ havells/ bajaj./crompton for: batote switch socket combination 2 in 1 flush type universal 5 a 5 pin, 240 volts and make: anchor/ havells/cona/greatwhite for: batote switch socket combination 2 in 1 flush type universal 15 a 5 pin, 240 volts. make: anchor/ havells/cona/greatwhite for: batote switch socket combination 5a with pvc board make - c&s, anchor, havells/greatwhite for: batote switch socket combination 15a with pvc board make - c&s, anchor, havells for: batote socket outlet 5 amp flush type 5 pin 240 v 50 hz. make:-havells/anchor/cona./greatwhite for: batote socket outlet 15 amp flush type 5 pin multi purpose 240 v 50 hz . make:-havells/anchor/cona /greatwhite for: batote pvc insulated copper cable of size 1.5sq mm round two core 1100 volt conforming is :694 of 100 mtr/roll colour. make - havells/grandlay wire/polycab/finolex./kie for: batote pvc insulated copper cable of size 2.5sq mm 2 core 1100 volt conforming is :694 of 100 mtr/roll colour. make - havells/grandlay wire/polycab/finolex. for: batote pvc insulated copper cable of size 2.5sq mm single core 1100 volt conforming is :694 of 90 mtr/roll colour. make - havells/grandlay wire/polycab/finolex. for: batote pvc insulated copper cable of size 1.5sq mm single core 1100 volt conforming is :694 of 90 mtr/roll colour. make - havells/grandlay wire/polycab/finolex. for: batote pvc insulated copper cable of size 1sq mm single core 1100 volt conforming is :694 of 90 mtr/roll colour. make - havells/grandlay wire/polycab/finolex. for: batote 6 sqmm flat two core pvc insulated cables stranded aluminium conductor 1100v grade conforming to is 694/1990 100 /rm roll . make - havells/grandlay wire/polycab/finolex. for: batote 10 sqmm flat two core pvc insulated cables stranded copper conductor 1100v grade conforming 100 /rm roll . make:- plaza/rpg/polycab. for: batote pvc aluminium conductor 1100 volt heavy duty service cable 16 sq mm two core. make:- rpg/plaza/havells. for: batote armoured cable four core 25sqmm. make:- rpg/plaza/havells. for: batote exhaust fan 250 mm sweep 1400 rpm single phase 240 volt 50 hz metal frame heavy duty. make - usha/ orient / khaitan/ bajaj/ havells. for: batote bed switch 1 way 6 amp make:-havells/anchor/cona /greatwhite for: batote switch piano type 5 amp single pole one way 240 volt 50 hz. make:-havells/ anchor/ cona/greatwhite for: batote switch piano type 15 amp single pole one way 240 volt 50 hz. make:-havells/ anchor/ cona holder batten angle type 240v 50 hz make:- havells/cona/anchor/greatwhite for: batote pendent holder 240v 50 hz make:- havells/cona/anchor/greatwhite for: batote flexible wire copper 2 core make-finolex/havells for: batote flexible pipe ist quality isi marked for: batote endura flate panel ultra slim edge-lt led edge -lit luminaire suitable for armstrong /grid ceiling complete with separate electronic driver 36 watt led 6000k. make : havells or equivalent /crompton for: batote ceiling fan of size 1200 mm sweep 240 volt 50 hz including mini fan ragulator and accessories.. make:- bajaj / khaitan / usha / crompton greaves/ havells. for: batote fan regulator resistance step type.make:- havells/cona/anchor. for: batote fan capacitors up to 2 mfd suitable for ceiling fan make:- havells/tibcon. for: batote electronic chock electronic ballast suitable for 1x36/40 watt 240v 50 hz ftl tube light fitting make: havells/wipro/cg/bajaj. for: batote mcb spn 6a. 240v 50 hz c curve characteristic. make:- havells/ legrand/ schneider/ l&t/greatwhite for: batote mcb spn 10a. 240v 50 hz c curve characteristic. make:- havells/ legrand/ schneider/ l&t/greatwhite for: batote mcb spn 16a. 240v 50 hz c curve characteristic. make:- havells/ legrand/ schneider/ l&t/greatwhite for: batote mcb sp 32 a. 240v 50 hz c curve characteristic. make:- havells/ legrand/ schneider/ l&t/greatwhite for: batote mcb dp 32 amp 2 pole. 240 v 50 hz c series characteristics. make:- havells/legrand/schneider/l&t /greatwhite for: batote mcb spn 63 amp 2 pole . 240 v 50 hz make havells/legrand/schneider/l&t/greatwhite for: batote mcb dp 63a. 240v 50 hz c curve characteristic. make:- havells/ legrand/ schneider/ l&t/greatwhite for: batote mcb tpn 63a. 240v 50 hz c curve characteristic. make:- havells/ legrand/ schneider/ l&t/greatwhite for: batote pvc board of size 100x150mm for: batote wooden board with screw rectangular block for mounting switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cut of hole as per reqd size for mounting of switch socket, regulator cover of size board 250 mm x 200 mm and 50 mm deep. for: batote wooden board with screw rectangular block for mounting switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cut of hole as per reqd size for mounting of switch socket, regulator cover of size 175 mm x100mm and 50 mm deep. for: batote 32 a on load change over switch dp in sheet enclosure with side handle. make:- havells/legrand/schneider/l&t. for: batote 63 a on load change over switch tpn in sheet enclosure with side handle. make:- havells/ legrand /schneider/l&t. for: batote plug top 6 a 3 pin top 240 v 50 hz . make:-havells/anchor/cona for: batote plug 16a top 3 pin top 240 v 50 hz.make:-havells/anchor/cona for: batote water supply items pvc connection pipe 15mm dia 450mm long with brass end with washer isi marked. for: batote flush pipe pvc, 32 mm dia for low level cistern.long size for: batote pvc bib cock 15mm dia make -parko/sona/prayag for: batote pvc bib cock 20mm dia make -parko/sona/prayag for: batote cp concusive push with self closing tap 15mm dia high presser screwed for iron pipe and fixed. prayag/ gem/ parko/ sona for: batote cp bib cock 15mm make :- sona, parko, gem for: batote cp bib cock 20mm make :- sona, parko, gem for: batote fancy type bib cock 15mm make :- sona, parko, gem for: batote fancy type bib cock 20mm make :- sona, parko, gem for: batote fancy type bib cock 25mm make :- sona, parko, gem for: batote vitreous china wash hand basin pedestal type angle back white, flat back, pedestal pype size 580 mm x 450 mm including bracket and waste pipe. make hindware/cera/parryware/hindustan for: batote iwc vitreous china squatting pan, orissa pattern of size 580 mm x 440 mm of white colour with integral foot. make hindware/ cera/parryware. for: batote ewc vitreous china with seat cover make hindware/ cera/parryware. for: batote provn of rotational moulded polyethylene water storage tanks, cylindrical vertical type double layer isi marked to is 12701:1996 reaffirmed-2006 edition 2.2. of capacity 1000 ltr, with closed lid with clamp and locking arrangement. make:-star/sintex/plasto. for: batote bib cock 15 mm brass isi marked isi marked. make tata/jindal/unik for: batote bib cock 20 mm brass isi marked isi marked. make tata/jindal/unik for: batote gi pipe 15 mm dia medium grade 20 long. make : surya prakash/ tata/jindal. for: batote gi pipe 20 mm dia medium grade 20 long. make : surya prakash/ tata/jindal. for: batote gi pipe 25 mm dia medium grade 20 long. make : surya prakash/ tata/jindal. for: batote gi l bend 15 mm dia make :- surya/unik/mac for: batote gi l bend 20 mm dia make :- surya/unik/mac for: batote gi l bend 32 mm dia make :- surya/unik/mac for: batote gi l bend 40 mm dia make :- surya/unik/mac for: batote gi elbow 15mm dia. make:- surya/ unik/ mac. for: batote gi elbow 20mm dia. make:- surya/unik/mac. for: batote gi elbow 25mm dia medium grade. make:- surya/ unik/ mac. for: batote gi union 15mm dia. make: surya/unik/mac. for: batote gi union 20mm dia. make: surya/unik/mac. for: batote gi union 25mm dia. make: surya/unik/mac. for: batote gi union 40mm dia. make: surya/unik/mac. for: batote gi union 50mm dia. make: surya/unik/mac. for: batote end cap 15 mm for: batote end cap 20mm for: batote cotton thread 100mtr for: batote safeda for: batote gi tee 15 mm. make:- surya/unik/mac. for: batote gi tee 20 mm. make:- surya/unik/mac. for: batote gi tee 25 mm. make:- surya/unik/mac. for: batote gi reducer tee 20x15mm make:- surya/unik/mac. for: batote cp wall mixer make :- sona, parko, gem for: batote cp pillar cock 15mm make :- sona, parko, gem for: batote cp stop cock 15mm make :- sona, parko, gem for: batote stop cock15 mm brass isi marked isi marked. make tata/jindal/unik. for: batote stop cock 20 mm brass isi marked isi marked. make tata/jindal/unik. for: batote stop cock25 mm brass isi marked isi marked. make tata/jindal/unik. for: batote gi reducer socket 20/15 mm dia. make:- surya/unik/mac. for: batote gi reducer socket 25/15 mm dia. make:- surya/unik/mac. for: batote gi reducer socket 25/20 mm dia. make:- surya/unik/mac. for: batote gi reducer socket 32/20 mm dia. make:- surya/unik/mac. for: batote gi nipple 15mm x 50 mm isi marked make unik/mac for: batote gi nipple 15mm x 75 mm isi marked make unik/mac for: batote gi nipple 15mm x 100 mm isi marked make unik/mac for: batote gi nipple 15mm x 150 mm isi marked make unik/mac for: batote gi nipple 20mm dia 4 long isi marked make tata/jindal/unik. for: batote gi nipple 20mm dia 6 long isi marked make tata/jindal/unik. for: batote gi nipple 50mm 4 long isi marks make : unik for: batote gi tank nipple 15mm dia 3 long isi marked make tata/jindal/unik for: batote sheet glass self assy consisting of 5.5mm thick sheet glass shelf 12cm wide chromium plated bracket guard and railing 60cm long make - hindware, prayag, parko. for: batote pvc pipe 15mm bore 3 mtr long. make :- prince/supreme/kisan for: batote pvc pipe 25mm bore 3 mtr long. make :- prince/supreme/kisan for: batote pvc pipe 110mm bore 6 mtr long. make :- prince/supreme/kisan for: batote pvc pipe 110mm bore 3 mtr long. make :- prince/supreme/kisan for: batote pvc pipe 75mm bore 3 mtr long. make :- prince/supreme/kisan for: batote pvc swr bend 110 mm bore. make - kisan/ supreme/ prince. for: batote pvc swr branch piece 110 mm bore. make - kisan/ supreme/ prince. for: batote pvc bend 75mm dia. make:- prince/kisan/supreme. for: batote pvc tee 110mm make :- prince/supreme/kisan. for: batote pvc vent coul 110mm dia isi marked for: batote pvc vent coul 75mm dia isi marked for: batote pvc floor trap make :- prince/supreme/kisan. for: batote gi socket 15 mm dia make :- surya/unik/mac for: batote gi socket 20 mm dia make :- surya/unik/mac for: batote gi socket 50mm dia make :- surya/unik/mac for: batote ball brass valve 15mm make :- sona, parko, gem for: batote gate valves 15 mm brass isi marked make tata/jindal/unik for: batote gate valves 20 mm brass isi marked make tata/jindal/unik for: batote gate valves 25 mm brass isi marked make tata/jindal/unik for: batote gate valves 40 mm brass isi marked make tata/jindal/unik for: batote gate valves 50 mm brass isi marked make tata/jindal/unik for: batote nrv 40mm with flange for: batote pvcwaste pipe for urinal pot isi marked. for: batote pvc waste pipe for wash hand basin isi marked. for: batote cp coupling for wash hand basin isi marked. for: batote stainless stell sink with coupling isi marked. for: batote cp soap dish make:- prayag/parko/sona. for: batote health faucet 15 mm make:- prayag/parko/sona. for: batote cp angle valve 15mm make:- prayag/parko/sona. for: batote float valve/ball brass valves 15mm dia high pressure, with polythene float and flynut complete isi marked. for: batote float valve/ball brass valves 20mm dia high pressure, with polythene float and flynut complete isi marked. for: batote pvc float valve 25mm make :- sona, parko, gem for: batote shower rose 100mm with rod make:- prayag/parko/gem. for: batote teflon tape for fixing of gi fittings for: batote cutting plier make taparia, hira, johnson for: batote pipe dia set 15 to 25mm make- hira for: batote tile cutter blade make-bosch for: batote pipe wrench 6 make- taparia, hira for: batote pipe wrench 24 make- taparia, hira for: batote pipe wrench 30mm make- taparia, hira for: batote pipe wrench 20mm make - taparia, hira for: batote pipe wrench 15mm make- taparia, hira for: batote adjustable spanner 10 make - taparia, hira for: batote tile cutter make- bosch for: batote fevicol make-pidilite for: batote solution sr 998 make-pidilite for: batote water pump 2hp make - kirloskar, crompton, johnson for: batote hacksaw blade 2 in 1 for: batote measuring tape 30mtr make- freemans/heera for: batote welding rod make-heera for: batote screw drive comp set make - hira/ taparia for: batote drill machine make- bosch/hira for: batote ro plant cri pump 1000ltr for: batote doging pump for: batote spun 20 for: batote ctp 20 for: batote pressure meter for: batote

State Government

TRN :18649856 | 19 Aug, 2020

Tender Value : 4.00 Crore

Jaipur - Rajasthan

Tender for supply of surgical items- absorbable gelatin sponge ip 66 size 80 10 mm x 50 mm x 10 mm should be sterilized. absorbent cotton wool ip 500 gm asepto syringe with transparent bulb sterile, 60 ml disposable sterile surgical rubber gloves size 6 ½ inches made of natural rubber latex, powdered, without tear, properly folded in a paper free of holes, with acceptable quality level aql of 1.5 or less tensile strength as per en 455-2 powder should be non-allergenic should conform to is 13422 isi marked/ce certified/fda approved. disposable sterile surgical rubber gloves size 6 ½ inches made of natural rubber latex, powder free polymer/silicon coated, without tear, properly folded in a paper free of holes, with acceptable quality level aql of 1.5 or less tensile strength as per en 455-2 should conform to is 13422 isi marked/ce certified/fda approved ce certification/fda approval for item is mandatory for importer firms, that cannot avail is standards disposable sterile surgical rubber gloves size 7 inches made of natural rubber latex, powdered, without tear, properly folded in a paper. free of holes, with acceptable quality level aql of 1.5 or less tensile strength as per en 455-2 powder should be non-allergenic should conform to is 13422 isi marked/ce certified/fda approved. disposable sterile surgical rubber gloves size 7 inches made of natural rubber latex, powder free polymer/silicon coated, without tear, properly folded in a paper free of holes, with acceptable quality level aql of 1.5 or less tensile strength as per en 455-2 should conform to is 13422 isi marked/ce certified/fda approved ce certification/fda approval for item is mandatory disposable sterile surgical rubber gloves size 7 ½ inches made of natural rubber latex, powdered, without tear, properly folded in a paper free of holes, with acceptable quality level aql of 1.5 or less tensile strength as per en 455-2 powder should be non-allergenic should conform to is 13422 isi marked/ce certified/fda approved. disposable sterile surgical rubber gloves size 7 ½ inches made of natural rubber latex, powder free polymer/silicon coated, without tear, properly folded in a paper. free of holes, with acceptable quality level aql of 1.5 or less tensile strength as per en 455-2 should conform to is 13422 • isi marked/ce certified/fda approved ce certification/fda approval for item is mandatory for importer firms, that cannot avail is standards suction catheter, sterile, size: fg 5 for use in respiratory tract • soft, kink resistant tubing • rounded open tip with lateral eye. • colour coded universal funnel connector for safe connection to standard suction equipment. • length 50 cm min. suction catheter, sterile, size: fg 6 for use in respiratory tract • soft, kink resistant tubing • rounded open tip with lateral eye. • colour coded universal funnel connector for safe connection to standard suction equipment. • length 50 cm min. • should conform to iso 8836:2014 suction catheter, sterile, size: fg 8 for use in respiratory tract • soft, kink resistant tubing • rounded open tip with lateral eye. • colour coded universal funnel connector for safe connection to standard suction equipment. • length 50 cm min. • should conform to iso 8836:2014 suction catheter, sterile, size: fg 10 for use in respiratory tract • soft, kink resistant tubing • rounded open tip with lateral eye. • colour coded universal funnel connector for safe connection to standard suction equipment. • length 50 cm min. • should conform to iso 8836:2014 suction catheter, sterile, size: fg 12 for use in respiratory tract • soft, kink resistant tubing • rounded open tip with lateral eye. • colour coded universal funnel connector for safe connection to standard suction equipment. • length 50 cm min. • should conform to iso 8836:2014 suction catheter, sterile, size: fg 14 for use in respiratory tract • soft, kink resistant tubing • rounded open tip with lateral eye. • colour coded universal funnel connector for safe connection to standard suction equipment. • length 50 cm min. • should conform to iso 8836:2014 suction catheter, sterile, size: fg 16 for use in respiratory tract • soft, kink resistant tubing • rounded open tip with lateral eye. • colour coded universal funnel connector for safe connection to standard suction equipment. • length 50 cm min. • should conform to iso 8836:2014 suction catheter, sterile, size: fg 18 for use in respiratory tract • soft, kink resistant tubing • rounded open tip with lateral eye. • colour coded universal funnel connector for safe connection to standard suction equipment. • length 50 cm min. • should conform to iso 8836:2014 suction catheter, sterile, size: fg 20 for use in respiratory tract • soft, kink resistant tubing • rounded open tip with lateral eye. • colour coded universal funnel connector for safe connection to standard suction equipment. • length 50 cm min. • should conform to iso 8836:2014 suction catheter, sterile, size: fg 22 for use in respiratory tract • soft, kink resistant tubing • rounded open tip with lateral eye. • colour coded universal funnel connector for safe connection to standard suction equipment. • length 50 cm min. • should conform to iso 8836:2014 sterile catheter single use, for urinary drainage foley balloon catheter 2 way, size 8fg • made of silicone elastomer bonded with latex • should have hard plastic valve. • smooth distal end with smooth eyes for atraumatic intubation • symmetrical foley balloon. • balloon capacity 3-5 ml • should conform to is 11497 • color coding marking to identify size • length, wall thickness and balloon capacity should be mentioned as per is 11497. • specification for b, c, d, e, f, g should be mentioned as per is 11497 for particular size. sterile catheter single use, for urinary drainage foley balloon catheter 2 way, size 10fg • made of silicone elastomer bonded with latex • should have hard plastic valve. • smooth distal end with smooth eyes for atraumatic intubation • symmetrical foley balloon. • balloon capacity 3-5 ml • should conform to is 11497 • color coding marking to identify size • length, wall thickness and balloon capacity should be mentioned as per is 11497. • specification for b, c, d, e, f, g should be mentioned as per is 11497 for particular size. • sterile catheter single use, for urinary drainage foley balloon catheter 2 way, size 16fg • made of silicone elastomer bonded with latex • should have hard plastic valve. • smooth distal end with smooth eyes for atraumatic intubation • symmetrical foley balloon. • balloon capacity 30±1 ml • should conform to is 11497 • color coding marking to identify size • length, wall thickness and balloon capacity should be mentioned as per is 11497. • specification for b, c, d, e, f, g should be mentioned as per is 11497 for particular size. • sterile catheter single use, for urinary drainage foley balloon catheter 2 way, size 18fg • made of silicone elastomer bonded with latex • should have hard plastic valve. • smooth distal end with smooth eyes for atraumatic intubation • symmetrical foley balloon. • balloon capacity 30±1 ml • should conform to is 11497 • color coding marking to identify size • length, wall thickness and balloon capacity should be mentioned as per is 11497. • specification for b, c, d, e, f, g should be mentioned as per is 11497 for particular size. • sterile catheter single use, for urinary drainage foley balloon catheter 2 way, size 20fg • made of silicone elastomer bonded with latex • should have hard plastic valve. • smooth distal end with smooth eyes for atraumatic intubation • symmetrical foley balloon. • balloon capacity 30±1 ml • should conform to is 11497 • color coding marking to identify size • length, wall thickness and balloon capacity should be mentioned as per is 11497. • specification for b, c, d, e, f, g should be mentioned as per is 11497 for particular size. • sterile catheter single use, for urinary drainage foley balloon catheter 2 way, size 22fg • made of silicone elastomer bonded with latex • should have hard plastic valve. • smooth distal end with smooth eyes for atraumatic intubation • symmetrical foley balloon. • balloon capacity 30±1 ml • should conform to is 11497 • color coding marking to identify size • length, wall thickness and balloon capacity should be mentioned as per is 11497. • specification for b, c, d, e, f, g should be mentioned as per is 11497 for particular size. sterile catheter single use, for urinary drainage foley balloon catheter 2 way, size 24fg • made of silicone elastomer bonded with latex • should have hard plastic valve. • smooth distal end with smooth eyes for atraumatic intubation • symmetrical foley balloon. • balloon capacity 30±1 ml • should conform to is 11497 • color coding marking to identify size • length, wall thickness and balloon capacity should be mentioned as per is 11497. • specification for b, c, d, e, f, g should be mentioned as per is 11497 for particular size. infant feeding tube size: 10fg length 50 cm min. • two lateral eyes as distal end. • soft, kink resistant non-toxic pvc tubing, non irritant to delicate mucosa. • with female flexible mount with in-built closure. • radio opaque line. • sterile. infant feeding tube size: 8fg length 50 cm min. • two lateral eyes as distal end. • soft, kink resistant non-toxic pvc tubing, non irritant to delicate mucosa. • with female flexible mount with in-built closure. • radio opaque line. • sterile. infant feeding tube size: 5fg length 50 cm min. • two lateral eyes as distal end. • soft, kink resistant non-toxic pvc tubing, non irritant to delicate mucosa. • with female flexible mount with in-built closure. • radio opaque line. • sterile. sterile disposable perfusion set with airway and needle adult use • for gravity feed only • sharp and easy piercing spike with air vent. • transparent and flexible drip chamber. • 150 cm long smooth kink resistant tubing . • self scaling latex bulb which will also act as an port for extra medication. • efficient roller clamp to control and adjust the fluid rate. • 21 g needle. • should conform to is 12655-4 standard. sterile disposable perfusion set infusion set with airway and needle paediatric use, • burette type measured volume chamber of 100 ml. • drop size of approx 60 drops per ml. • injection port, latexfree, for intermittent medication. • floating auto shut off valve latex free in burette. • soft and kink resistant pvc tubing. • roller controller for flow control. • tube length 150 cm. • 23g needle. • should conform to iso 8536-5 sterile disposable infusion set with microdrip, i.v. • microdrip infusion set with drop size reduced to approx 60 drops per ml. • sharp and easy piercing spike. • transparent and flexible drip chamber. • 150 cm long smooth kink resistant tubing. • efficient roller clamp to control and adjust the fluid rate. • should conform to is 12655-4 standard. infusion syringe 40 units with fixed 30 g needle. shall conform to is 12227 sterile disposable single useteflon/ ptfe i.v. cannula with integrated 3 way stop cock. size 16 g • should be packed in transparent, single blister pack. • should conform to is 10555 standard. sterile disposable single useteflon/ ptfe i.v. cannula with integrated 3 way stop cock. size 18 g • should be packed in transparent, single blister pack. • should conform to is 10555 standard. sterile disposable single useteflon/ ptfe i.v. cannula with integrated 3 way stop cock. size 20 g • should be packed in transparent, single blister pack. • should conform to is 10555 standard. sterile disposable single useteflon/ ptfe i.v. cannula with integrated 3 way stop cock. size 22 g • should be packed in transparent, single blister pack. • should conform to is 10555 standard. sterile disposable single useteflon/ ptfe i.v. cannula without port. size 24 g • suitable for paediatric & neonatal use. • should be packed in transparent, single blister pack. • should conform to is 10555 standard. mucus extractor sterile • clear transparent container. • antibacterial filter. • soft, kink resistant pvc tubing. • tube size 10 fg; length 40 cm min. • capacity 25 ml. nasal oxygen cannula set, twin bore accessory for compressed air breathing all sizes adult. • soft and kink resistant pvc tubing • multichannel/star lumen to preventing accidental kinking. • twin bores should ensure equal volume of oxygen to both air passages. • connector for easy connection to the oxygen source. • tube length 200 cm. nasal oxygen cannula set, twin bore accessory for compressed air breathing all sizes pediatrics. • soft and kink resistant pvc tubing • multichannel/star lumen to preventing accidental kinking. • twin bores should ensure equal volume of oxygen to both air passages. • connector for easy connection to the oxygen source. • tube length 200 cm. plaster of paris bandages 15 cm x 2.7 mts/roll should conform to schedule fii of drug and cosmetic act 1940 plaster of paris bandages 10 cm x 2.7 mts/roll should conform to schedule fii of drug and cosmetic act 1940 ryle’s tube/nasogastric tube p.v.c. with radio opaque lining .size : 10 • soft kink resistant pvc tubing for atraumatic intubation . • closed distal end should be coned with radio opaque material for accurate intubation. • four lateral eyes for greater efficiency. • radio opaque line. • marking at 50, 60, 70 cm from tip. • colour coded funnel. • with lucr connector/closure. • length 105 cm ryle’s tube/nasogastric tube p.v.c. with radio opaque lining .size : 12 • soft kink resistant pvc tubing for atraumatic intubation . • closed distal end should be coned with radio opaque material for accurate intubation. • four lateral eyes for greater efficiency. • radio opaque line. • marking at 50, 60, 70 cm from tip. • colour coded funnel. • with lucr connector/closure. • length 105 cm ryle’s tube/nasogastric tube p.v.c. with radio opaque lining .size : 14 • soft kink resistant pvc tubing for atraumatic intubation . • closed distal end should be coned with radio opaque material for accurate intubation. • four lateral eyes for greater efficiency. • radio opaque line. • marking at 50, 60, 70 cm from tip. • colour coded funnel. • with lucr connector/closure. • length 105 cm ryle’s tube/nasogastric tube p.v.c. with radio opaque lining .size : 16 • soft kink resistant pvc tubing for atraumatic intubation . • closed distal end should be coned with radio opaque material for accurate intubation. • four lateral eyes for greater efficiency. • radio opaque line. • marking at 50, 60, 70 cm from tip. • colour coded funnel. • with lucr connector/closure. • length 105 cm ryle’s tube/nasogastric tube p.v.c. with radio opaque lining .size : 18 • soft kink resistant pvc tubing for atraumatic intubation . • closed distal end should be coned with radio opaque material for accurate intubation. • four lateral eyes for greater efficiency. • radio opaque line. • marking at 50, 60, 70 cm from tip. • colour coded funnel. • with lucr connector/closure. • length 105 cm scalp vein set disposable size 18g • butterfly shaped wings for easy handling and attachment with skin colour coded. • needle should be beveled, siliconised and should ensure atraumatic cannulation. • female lucr fitting at one end. • soft, kink resistant, non-toxic, non irritant tube. • sterile. scalp vein set disposable size 20g • butterfly shaped wings for easy handling and attachment with skin colour coded. • needle should be beveled, siliconised and should ensure atraumatic cannulation. • female lucr fitting at one end. • soft, kink resistant, non-toxic, non irritant tube. • sterile. scalp vein set disposable size 22g • butterfly shaped wings for easy handling and attachment with skin colour coded. • needle should be beveled, siliconised and should ensure atraumatic cannulation. • female lucr fitting at one end. • soft, kink resistant, non-toxic, non irritant tube. • sterile. scalp vein set disposable size 24g • butterfly shaped wings for easy handling and attachment with skin colour coded. • needle should be beveled, siliconised and should ensure atraumatic cannulation. • female lucr fitting at one end. • soft, kink resistant, non-toxic, non irritant tube. • sterile. sterile hypodermic syringe with needle attached, 24g, , single use- 2 ml. • clear transparent chamber. • prominent graduation. • inert material gasket at the piston to minimize friction during movement & prevent leakage and back flow. • sharp needle ensuring minimum trauma during penetration . • shall conform to is 12050 • packing: needle should be attached with the syringe and packed in unit ribbon pack. • the words “destroy after single use’’ or equivalent should be written on unit container. sterile hypodermic syringe with needle attached, 24g, , single use- 5 ml. • clear transparent chamber. • prominent graduation. • inert material gasket at the piston to minimize friction during movement & prevent leakage and back flow. • sharp needle ensuring minimum trauma during penetration . • shall conform to is 12050 • packing: needle should be attached with the syringe and packed in unit ribbon pack. • the words “destroy after single use’’ or equivalent should be written on unit container. suture needles curved ½ circle round body assorted size 11-15 • it should be mentioned whether needle is pointed or blunt with type of its point. • type of eye of the needle should be mentioned. • should conform to is-9165 suture needles curved ½ circle round body assorted size 1-5 • it should be mentioned whether needle is pointed or blunt with type of its point. • type of eye of the needle should be mentioned. • should conform to is-9165 suture needles curved ½ circle round body assorted size 16-20 • it should be mentioned whether needle is pointed or blunt with type of its point. • type of eye of the needle should be mentioned. • should conform to is-9165 suture needles curved ½ circle round body assorted size 6-10 • it should be mentioned whether needle is pointed or blunt with type of its point. • type of eye of the needle should be mentioned. • should conform to is-9165 suture needles curved and cutting ½ circle cutting size 6-10 • it should be mentioned whether needle is pointed or blunt with type of its point. • type of eye of the needle should be mentioned. • should conform to is-9165 suture needles curved and cutting ½ circle size 11-15 • it should be mentioned whether needle is pointed or blunt with type of its point. • type of eye of the needle should be mentioned. • should conform to is-9165 suture needles curved and cutting ½ circle size 16-20 • it should be mentioned whether needle is pointed or blunt with type of its point. • type of eye of the needle should be mentioned. • should conform to is-9165 suture needles curved and cutting size 1-5 • it should be mentioned whether needle is pointed or blunt with type of its point. • type of eye of the needle should be mentioned. • should conform to is-9165 sterile disposable spinal needle for single use., 22g x 3 ½ inch • clear/transparent hub • sharp tip which should ensure minimal puncture trauma. sterile disposable spinal needle for single use., 25g x 3 ½ inch • clear/transparent hub • sharp tip which should ensure minimal puncture trauma. double j stent, sterile, both ends open-size 4f, length 16 cm. • radio opaque. • should be of inert material, non-irritant to tissue. double j stent, sterile, both ends open-size 5f, length 20 cm. • radio opaque. • should be of inert material, non-irritant to tissue. double j stent, sterile, one end closed-size 4f, length 16 cm. • radio opaque. • should be of inert material, non-irritant to tissue. double j stent, sterile, one end closed-size 5f, length 20 cm. • radio opaque. • should be of inert material, non-irritant to tissue. endotracheal tube, plain-size 5.5 mm • transparent • standard 15 mm connector at proximal end. • radio-opaque line throughout the length • tip suitable for nasal and oral intubation • single use, sterile. endotracheal tube, plain with-opaque line, sterile, single use-size 6 mm • transparent • standard 15 mm connector at proximal end. • radio-opaque line throughout the length • tip suitable for nasal and oral intubation • single use, sterile. endotracheal tube, plain-size 6.5 mm • transparent • standard 15 mm connector at proximal end. • radio-opaque line throughout the length • tip suitable for nasal and oral intubation • single use, sterile. endotracheal tube, plain-size 7 mm • transparent • standard 15 mm connector at proximal end. • radio-opaque line throughout the length • tip suitable for nasal and oral intubation • single use, sterile. endotracheal tube, plain-size 7.5 mm • transparent • standard 15 mm connector at proximal end. • radio-opaque line throughout the length • tip suitable for nasal and oral intubation • single use, sterile. endotracheal tube, plain-size 8 mm • transparent • standard 15 mm connector at proximal end. • radio-opaque line throughout the length • tip suitable for nasal and oral intubation • single use, sterile. endotracheal tube, plain-size 8.5 mm • transparent • standard 15 mm connector at proximal end. • radio-opaque line throughout the length • tip suitable for nasal and oral intubation • single use, sterile. endotracheal tube, cuffed-size 4 mm • soft cuff towards the distal end. • kink resistant inflation tube. • murphy eye at distal end with polished smoothness • radio-opaque line • standard 15 mm connector. • sterile, single use • curved shaped blister pack- suiting the shape of product. endotracheal tube, cuff-size 4.5 mm • soft cuff towards the distal end. • kink resistant inflation tube. • murphy eye at distal end with polished smoothness • radio-opaque line • standard 15 mm connector. • sterile, single use • curved shaped blister pack- suiting the shape of product. endotracheal tube, cuff-size 5 mm • soft cuff towards the distal end. • kink resistant inflation tube. • murphy eye at distal end with polished smoothness • radio-opaque line • standard 15 mm connector. • sterile, single use • curved shaped blister pack- suiting the shape of product. endotracheal tube, cuff-size 6.5 mm • soft cuff towards the distal end. • kink resistant inflation tube. • murphy eye at distal end with polished smoothness • radio-opaque line • standard 15 mm connector. • sterile, single use • curved shaped blister pack- suiting the shape of product. endotracheal tube, cuff-size 7.5 mm • soft cuff towards the distal end. • kink resistant inflation tube. • murphy eye at distal end with polished smoothness • radio-opaque line • standard 15 mm connector. • sterile, single use • curved shaped blister pack- suiting the shape of product. endotracheal tube, cuff-size 8 mm • soft cuff towards the distal end. • kink resistant inflation tube. • murphy eye at distal end with polished smoothness • radio-opaque line • standard 15 mm connector. • sterile, single use • curved shaped blister pack- suiting the shape of product. endotracheal tube, cuff-size 9 mm • soft cuff towards the distal end. • kink resistant inflation tube. • murphy eye at distal end with polished smoothness • radio-opaque line • standard 15 mm connector. • sterile, single use • curved shaped blister pack- suiting the shape of product. tracheostomy tube pvc, plain, sterile, single use- all sizes • soft flexible flange at for easy fixation. • 15 mm connector at terminal end which can be rotated in 360 degree direction. • non-irritant • radio-opaque line. tracheostomy tube pvc, cuffed, sterile, single use- all sizes • soft flexible flange at for easy fixation. • 15 mm connector at terminal end which can be rotated in 360 degree direction. • non-irritant • radio-opaque line. • balloon with non return valve. abdominal drain kit, sterile, having drainage catheter and collection bag 2000 ml size 24 • graduated bag. • should have well fitting cap • soft drainage catheter 50 cm long, with radio opaque line • rounded open distal end with smooth atraumatic eyes in catheter • catheter with markings at 2 cm interval. abdominal drain kit, sterile, having drainage catheter and collection bag 2000 ml size 28 • graduated bag. • should have well fitting cap • soft drainage catheter 50 cm long, with radio opaque line • rounded open distal end with smooth atraumatic eyes in catheter • catheter with markings at 2 cm interval. abdominal drain kit, sterile, having drainage catheter and collection bag 2000 ml size 32 • graduated bag. • should have well fitting cap • soft drainage catheter 50 cm long, with radio opaque line • rounded open distal end with smooth atraumatic eyes in catheter • catheter with markings at 2 cm interval. corrugated drainage sheet, sterile, multichannel, with radio opaque line, single use-all sizes polypropylene nonabsorbable synthetic surgical mesh 7.5 cm x 15 cm soft to feel fast edges, slightly stretchbonding . polypropylene nonabsorbable synthetic surgical mesh 15 cm x 15 cm soft to feel fast edges, slightly stretchbonding . sterilised umbilical cotton tape width 3 mm, length 75 cm should conform to schedule fiii of drug and cosmetic act 1940 bone wax sterilised temporary cardiac pacing wire electrode sterile ½ cir, tapercut, 26 mm, straight cutting 60mm, breakaway skin graft knife blade sterile disposable skin grafting knife blade sterile made of carbon steel or stainless steel material 158 mm long individually wrapped in wrapper corrosion inhibitor paper in single packet. in packs of 10, the edge must be sharp enough to cut the skin in a single shave and should snugly fit in the handle should conform to is 3759. 2.skin grafting knife handle waston modification of humpy, s knife stainless steel, ce certified, in which the blade specified in a above should fit snugly, should conform to 7980-1976 k wire, length 375 mm; 1 mm length of wire should be mentioned with specification, should conform to is 8261 k wire, length 375 mm; 1.6 mm length of wire should be mentioned with specification, should conform to is 8261 k wire, length 375 mm; size 1.8 mm length of wire should be mentioned with specification, should conform to is 8261 face mask, disposable • should be manufactured from non woven poly prop fabric. • should be 3 ply construction. • should have high bacterial filtration efficiency. • should be heat scaled to keep 3 layers together. • standard size 17.5 x 9 cm. • color green/blue. • there should be a string each at all four comers, length of string should be 40 cm. • nose clip should be there. • no elastic band. surgical cap, disposable for surgeons • should be manufactured from non woven fabric. • strip for tying the cap stitched on the back for proper grip on the forhead. • green colour. • ultrasonically stitched. • air permeable/breathable. • should retain skin and hair particle. • strip for tying the cap. surgical cap, disposable for nurses • should be manufactured from non woven fabric. • blue/green colour. • round upon wearing, with clastic. • air permeable/breathable. • should retain skin and hair particle. foldable intra ocular lense with injector size +11 d to + 17.5 d size:6mm optics, 12-13mm total diameter 1. made of foldable acrylic hydrophobic material. 2. bi-convex single piece iol with aspheric optics. 3. size:6mm optic. 12-13mm total diameter. 4. modified c loop haptic/plate haptics 5. iol should have uv blocking capability. 6. iol should have 360º square edge. 7. foldable and insertion by injector with disposable cartridge insertable by a sub 2.8 mm incision size or smaller incision. 8. diopters- + 11 d to + 17.5 d at 0.5 d step. 9. supplying unit should be iso accredited and iol should be ce/us fda certified. foldable intra ocular lense with injector size +18 d to + 24 d size:6mm optics, 12-13mm total diameter 1. made of foldable acrylic hydrophobic material. 2. bi-convex single piece iol with aspheric optics. 3. size:6mm optic. 12-13mm total diameter. 4. modified c loop haptic/plate haptics 5. iol should have uv blocking capability. 6. iol should have 360º square edge. 7. foldable and insertion by injector with disposable cartridge insertable by a sub 2.8 mm incision size or smaller incision. 8. diopters- + 18 d to + 24 d at 0.5 d step. 9. supplying unit should be iso accredited and iol should be ce/us fda certified. foldable intra ocular lense with injector size +24.5 d to + 28.5 d size:6mm optics, 12-13mm total diameter 1. made of foldable acrylic hydrophobic material. 2. bi-convex single piece iol with aspheric optics. 3. size:6mm optic. 12-13mm total diameter. 4. modified c loop haptic/plate haptics 5. iol should have uv blocking capability. 6. iol should have 360º square edge. 7. foldable and insertion by injector with disposable cartridge insertable by a sub 2.8 mm incision size or smaller incision. 8. diopters- + 24.5 d to + 28.5 d at 0.5 d step. 9. supplying unit should be iso accredited and iol should be ce/us fda certified. standard pmma intra ocular lenses size + 11 d to + 17.5 d 6mm optic size 12.5 -13.0mm total diameter, biconved. 1. pmma optics and haptics single piece with hole. 2. 6mm optic size 12.5 to 13mm total diameter. biconvex. 3. iol haptics modified c shaped with 5º-10º anterior angulation. 4. should have 360º square edge. 5. iol should have uv blocking capability. 6. diopters- + 11 d to + 17.5 d at 0.5 d step. 7. supplying unit should be iso accredited and iol should be ce/us fda certified. standard pmma intra ocular lenses size + 18 d to + 24 d • 6mm optic size 12.5 -13.0mm total diameter, biconved. 1. pmma optics and haptics single piece with hole. 2. 6mm optic size 12.5 to 13mm total diameter. biconvex. 3. iol haptics modified c shaped with 5º-10º anterior angulation. 4. should have 360º square edge. 5. iol should have uv blocking capability. 6. diopters- + 18 d to + 24 d at 0.5 d step. 7. supplying unit should be iso accredited and iol should be ce/us fda certified. standard pmma intra ocular lenses size + 24.5 d to + 28.5 d 6mm optic size 12.5 -13.0mm total diameter, biconved. 1. pmma optics and haptics single piece with hole. 2. 6mm optic size 12.5 to 13mm total diameter. biconvex. 3. iol haptics modified c shaped with 5º-10º anterior angulation. 4. should have 360º square edge. 5. iol should have uv blocking capability. 6. diopters- + 24.5 d to + 28.5 d at 0.5 d step. 7. supplying unit should be iso accredited and iol should be ce/us fda certified. disposable sterile surgical rubber gloves size 8 inches • made of natural rubber latex powder free, without tear, properly folded in a paper. • should conform to is 13422 • isi marked/ce certified/fda approved. • colour code marking to designate size. rubber examination gloves made of natural rubber latex. non-sterile, ambidextous, aql 1.5 micro texturerd powdered with absorbable dusting powder usp. extra small should conform to is 15354 rubber examination gloves made of natural rubber latex. non-sterile, ambidextous, aql 1.5 micro texturerd powdered with absorbable dusting powder usp. small should conform to is 15354 rubber examination gloves made of natural rubber latex. non-sterile, ambidextous, aql 1.5 micro texturerd powdered with absorbable dusting powder usp. medium should conform to is 15354 rubber examination gloves made of natural rubber latex. non-sterile, ambidextous, aql 1.5 micro texturerd powdered with absorbable dusting powder usp. large should conform to is 15354 pressure monitoring line/high pressure extension line • suitable for high pressure monitoring and for connection between syringe infusion pump and patient. • male luer lock at one end and female luer lock at other end; should fit all standard equipment . luer lock connectors should provide secure fitting. • pressure upto 800 psi • length 200 cm • sterile. urine collecting bag for new born/paediatric urine collection bag. capacity 100 ml • should have suitability for both male and female patients.

State Government

TRN :18745755 | 25 Aug, 2020

Tender Value : 15.00 Lacs

Ayodhya - Uttar Pradesh

Tender for supply of chemical, glassware/plasticware, filter paper and field materials- tassel bag 42x18x11cm 80gsm butter paper envelope 18x5cm butter paper envelope 20x8cm butter paper envelope 24x10cm butter paper envelope 10x7.5cm butter paper envelope 37x15cm craft paper envelope 23x10cm craft paper envelope 23x15cm craft paper envelope 30x25cm craft paper envelope 37x27cm craft paper envelope 40x30cm aluminium label with wire 3x1inch aluminium label with tail waterproof envelope 25x10cm waterproof envelope 28x12cm seed envelope 15x7cm seed envelope 19x7cm seed envelope 25x10cm seed envelope 35x12cm yellow seed packet 15x7cm gunny cloth bags 45x30cm gunny cloth bags 62x45cm gunny cloth bags 100x50cm alkathene sheet 400 gauge 1800mm width alkathene sheet 700 gauge gunny bags 100 kg cap muslin cloth bags 27x22cm muslin cloth bags 45x30cm muslin cloth bags 25x15cm muslin cloth bags with aluminium ring with 3 rings muslin cloth bags with aluminium ring with 2 rings luggage label no.3 eyeletted luggage label no.4 eyeletted cloth bags 500g cap 32x15cm cloth bags 1kg cap 30x7cm cloth bags 2kg cap 37x22.5cm cloth bags 5kg cap 45x30cm cloth bags 10kg cap 52x35cm cloth bags 15kg cap 60x45cm cloth bags 20kg cap 75x45cm plastic pots 4 inch 10x10cm plastic pots 6 inch 15x15cm plastic pots 8 inch 20x20cm plastic pots 10 inch 25x25cm alkathene bags 3 x 5 inch 400 gauge alkathene bags 12 x 8 inch alkathene bags 9 x 6 inch alkathene bags 15 x 9 inch alkathene bags 18 x 12 inch alkathene bags 24 x 18 inch jute canvas bags 40 kg cap jute canvas bags 20 kg cap price label with thread price label eyeletted twin ball wax coated seed displayer synthetic label 4x2 inch plastic peg label 70cm height with ring on top synthetic label waterproof with eyeletted 10x5 cm acrylic label with stand for pot 3x2.5x6inch acrylic label with stand for field 4x3x16inch acrylic label with stand for field 6x4x18inch acrylic label with stand for field big 9x6x20inch plastic pots made of fresh lldpe 20x20 cm white colour labortory coat apron terrycot standard size germination paper best quality 45 x 28 cm blotting paper handmade aluminium foil 9 mtr. tissue paper roll plastic hand sprayer knapsack 5 ltr., 10 ltr., 20 ltr. earthen pots 9 inch, 12 inch size cemented pots 12 inch, 18 inch size watering cane plastic cab hazara - 10 ltrs., 15 ltrs. slide box - 50 slides, 100 slides plastic tag 3x5cm, 4x6 cm plastic pots 1.0 kg, 2.0 kg, 5.0 kg root trainer with tray different size cocopit vermiculite different cap. pvc strip antiinsect 3 mm thickness nylon mesh 40 micron, 30 micron nylon rope 25 kg. bundle jute rope 25 kg. bundle green net for garden 1 mtr. x 10 mtr. 90 % diamond shade net 3 mtr. x 50 mtr. fashion senora green net 50% 10 x 12 feet hanging décor green shade net uv sterilized per meter isi mark i 50 s ii 70 s iii 90 s chemicals glassware plasticware and filter paper for anduat

State Government

TRN :18747327 | 19 Aug, 2020

Tender Value : 0

Kolkata - West Bengal

Tender for supply of 802.11 a/g/n standalone ap make: cisco wireless controller with 25 ap liecences. make: cisco 3kva ups with 6 no of 12 v 26 ah mf battery. 24 port semi managed switch. make: cisco hdtv 720p compliant out door ready g5 hd 7000 20x dnin/ out pendent cl 50/60 hz and g4 pendent arm w/230 vac white. make: infinova ptz out door ip66- raced bullet, hdtv, day/ night, fixed network camera hd 720p with 12v dc adaptor/poe midspan 16w. make: infinova dome camera with 720p resolution and vandal proof with 12v dc adaptor/poe midspan. ipise sinetwark storage server & recording management solution, fully loaded and fully functional with microsoft os, bvms and bosch vrm inclduing video streaming gateway, with software for network surveillance systems prelicensed with 32 channel software. client work stations intel core 7/8 gb/ 500 gb/ dvd rw/ win 8 installed 2 gb graphics card. make: hpl 42 professional led display for monitoring pc with 5mtr. vga to vga cable and wall mounted accessories. make: panasonic layer-2 managed network switch with 24x10/ 100/1000 mbps gigabit ethernet with 2 combo mini gbic port and gigaeathernet, model- ws c2960 24tc-s. make- cisco 12u wall mount indoor rack completed with pdus/ fan/ cable management for indoor switches & lius. make: hcl/ net rack 36u floor mount server rack wth pdus/ fan/ cable management for servers/ storage boxes/ switch/ liu. make: hcl/ net rack 3kva ups with battery bank, rack and all accessories. management service 8 hrs x 7 days cctv bullet camera hd quality. make: cp plus digital video recorder. make: cp plus central power supply. make: cp plus surveillance hard disk 2 tb. make: seagate 32 hd led make: samsung client work stations intel core 7/8 gb/ 500 gb/ dvd rw/ win 7 installed 2 gb graphics card. installed at assistant engineers office make: dell 1 kva ups. make: microtek cd/dvd player with usb drive 6w dual cone loudspeaker with a 100v, matching transformer mounted in the back sound pressure level at 6w/1w 1khz at 1m- 108.8db/ 90.8db effective frequency range -10db-150 hr- 15khz opening angel at 1 khz/ 4khz -6db- 180/45 impedance -1667ohm, diameter -210mm. make: bosch 240w booster ampliphier with following specification: main voltage 230v ac: 10% at 50/60 hz or 24v dc max mains power consumption 260va- max mains inruch current 9a at 230v ac, 11a at 24v dc - frequency response -60hz to 18khz +/-3db at -10db ref rated output s/n flat at max volume >85 db-sensitivity -100v -impedance -330ohm, rated output power -240w approved. make: bosch 180w two zone mixer amplifier with 4 microphone inputs with independent level contol - usb drive and sd card for mp3 playback -builtin fm tuner with preset memories -100v/ telephone input with prority and vox frequency response -80hz to 18khz distortion. make: bosch, 18swg ms rack duly wired provided with front and back door front door with acrylic sheet back door with louvers with provision for housing of 1 no of dvd player connecting stripe., management service 16 hrs x 7 days, add:gst @ 12%, labour welfare cess @1%,

State Government

TRN :18739322 | 24 Aug, 2020

Tender Value : 0

New Delhi - Delhi

Tender for supply of tools and material for cosmetic lab- small die split for silicon finger medium die split for silicon finger large die split for silicon finger die compressor small for silicon finger manual die compressor medium for silicon finger manual die compressor large manual magnetic stirrer with hot plate small weighing machine digital micromotor with attachments for silicone trimming and grinding carving tool set rubber shaper, clay sculpture 27 tool pure sable brushes pvc plastic bowl wax caliper e skin spectrometer 20, 000 real skin colours storage-up to 100 measurements built-in microphone with quick audio record for each colour · previews samples before measurement and zooms in to manually select specific areas · portable, lightweight and powered with a usb rechargeable battery · three measurement area sizes – 8mm, 4mm and 2mm led lamp with magnifying glass platinum cured silicone rubber part a platinum cured silicone rubber part b dental stone type iii alginate cold mould seal modeling wax intrinsic pigment including base color extrinsic pigment extrinsic sealant coloured flocking colored swatches acrylic silicon putti

Central Government/Public Sector

TRN :18741959 | 14 Aug, 2020

Tender Value : 0

Jamalpur - Bihar

Tender for supply of acrylic based adhesive oil & moisture resistance in 310 gm pack, , make- anabond -666 / dow corning / loctite

Central Government/Public Sector

TRN :18729660 | 25 Aug, 2020

Tender Value : 0

Leh - Ladakh

Tender for supply of wc indian type c/ set wc european with all fitments flushing cistern c/set health faucet west pipe connection pipe 1/2x 2 long bathroom mirror s/quality gate valve 1/2 gate valve 3/4 socket 1/2 elbow 1/2 elbow 3/4 tee 1/2 union 1/2 union 3/4 gi reducer 1/2x3/4 gi nipple 1/2 x2 gi nipple 3/4x4 gi tank nipple 1/2x2 gi pipe 1/2 dia 6 m long gi pipe 3/4 dia 6 m long ppr tee 25 mm ppr tee 32 mm ppr elbow 25 mm ppr elbow 32 mm ppr union 25 mm dia ppr union 32 mm dia ppr reducer 32 mm x 25 mm ppr socket 25 mm ppr socket 32mm ppr gatevalve 25 mm ppr gatevalve 32 mm ppr ft socket ppr pipe 25 mm x 6 long ppr pipe 32 mm x 6 long cp bib cock pillar cock for wash basin pvc bend 4 dia pvc elbow 4 dia pvc pipe 4 dia x 6 m long pvc socket 4 dia m-seal plumbing thread glass putty nails 3 inches nails 4 inches nails 1 inches nails 1.5 inches nails 1/2 inches plywood 8x4x19 mm plywood 8x4x12 mm plywood 8x4x10 mm fevicol transparent acrylic sheet 8x4 cgi sheet 10x3x0.63 mm scantling 10x2x2 scantling 10x3x3 scantling 10x3x4 drill machine concrete bit 6 mm door closer door stopper pgi sheet screw 1 consisting 100 nos pbs roll 3 width curtain rod 1x12 long wire mesh for window conrugated transparent roofing sheet 10 x 4 paint teracotta blue paint green paint paint og yellow paint paint golden colour red paint white paint silver paint black paint distemper white strainer yellow oxide lime /chuna geru wall putty white cement synthetic rubber adhesive painting brush 2 painting brush 4 painting brush 5 glycol wall tiles glazed dado 0.2x0.3 tube light 4 long c/ set led led bulb 12 w cfl 20 w 5 amp socket 5 pin 15 amp socket 5pin 5 amp switch 15 amp switch pvc insulated e/ wire 1.5 sqm s/ core copper conductor pvc insulated e/ wire 2.5 sqm s/ core copper conductor flexible wire mcb 32 amp double pole mcb 16 amp with box electronic tube rod 4 long 40 w mcb 6 amp with box casing caping 6x2 insulation tape button holder angle holder 3 pin top 5 amp

Central Government / Public Sector

TRN :18720373 | 08 Sep, 2020

Tender Value : 0

Waltair - Andhra Pradesh

Tender for supply of foldable superphob hydrophobic acrylic unifocal biocompatible yellow premium uv light protective, aspheric optics & glistening free lens in nos multi focal natural yellow coloured chromatophore hydrophobic acrylic foldable infocus lens with uv protective with 360 degree square edge design with enhanced contrast sensitivity, anterior design refractive extended depth of focus & axial, micro diffractive optic with refractive index of 1.505 in nos

Related Keywords : acrylic item

List of latest acrylic-item Tenders in Indian Tenders. Click on any acrylic-item Tenders to view BOQ, NIT and Tender Documents. Get Bidding Support and Vendor Registration for acrylic-item Tenders.

Tender for supply of acrylic based adhesive oil & moisture resistance in 310 gm pack, , make- anabond -666 / dow corning / loctite

Get acrylic item Tender Alert...

Related Keywords : acrylic item

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us