Bidding Support

975137

Bidding Support

Warm Greetings from www.thetenders.com, the fastest growing tender information portal in India.

Supply of Ferritic Steel Sheet 5X1250 X 3000 Mm., As Per Drawing: Rdso Spec No.C-K201, Gra De X2crni12 409M Table 1&2. Heat Treatment Condition 2D As Per Table-5., Packing Instructio N: Stainless Steel Sheets, Coils And Plates:- A Stainless Steel Austenitic & Ferritic S Teel Coils. The Coil Shall Be Protected In Reasonably Good Condition To Withstand Normal Handling Hazard During Transit With The Following Provision As The Barest Minimum: I Coil Should Be Wrapped With A Layer Of Water Proof Paper Through Out Whole Length. Ii Coil Should Be Wrapped With A Layer Of Biodegradeable Sheet. Iii O Uter & Inner Of Coil Should Be Wrapped With Gi Sheet. Iv Side Of The Coil Should Be C Overed With Card Board Sheet. V After This Whole Coil Should Be Wrapped With Biod Egradeable Plastic Sheet Of Suitable Thickness. Vi The Inner Edge Of The Coil Shoul D Be Protected By Gi Ring Followed By Another Iron Ring. Vii Outer Edge Of The Coil Should Be Wrapped With Gi Ring. Viii Coil Should Be Securely Strapped With Minium 5 Steel Bands Through The Eyes Of The Coil And Minium 3 Steel Bands On The Circumfer Ence Of The Eye. Ix Whole Coil Should Be Mounted On Wooden Blocks For Easy Liftin G/Stacking. X The Sheets In Coil Form For Thickness 2Mm And Above Shall Have: Inner Dia Of Coil 450-800Mm Outer Dia Of Coil 1000-1300Mm Weight Of Coil 2.4 - 10 Tonnes Xi The Sheets In Coil Form For Thickness Below 2Mm Shall Have: Inner Dia Of Coil 450-650Mm O Uter Dia Of Coil 1000-1300Mm Weight Of Coil 5.0 - 10 Tonnes. B Stainless Steel Austeniti C & Ferritic Steel Plates/Sheets I The Sheets/Plates Shall Be Supplied In Bundles Of Optimum Weight: 2Mt+/-10% & Each Sheet/Plate Shall Be Seprated With A Layer Of Wate R Proof Paper, After This The Whole Bundle Should Be Wrapped With Double Layer O F Water Proof Paper And A Biodegradeable Plastic Sheet Of Suitable Thickness. A Me Tal Protection In Edges Should Also Be Provided. Ii All Bundles Shall Have A Minimum Of 2 Hoops Upto 1.2 Meter In Length And One Extra Hoop For Every Additional Meter. The Bundles Shall Also Be Provided With Skid Wooden Packing Under Neath To Facili Tate Handling. Mechanical Damange & Corrosion During Transit If Any Shall Be At Th E Cost Of Supplier. Warranty Period: 30 Months After The Date Of Delivery Ferritic Steel Sheet 3X1250x3100 Mm., As Per Drawing: Rdso Spec. No. C-K201, Gra De X2crni12 409M Table 1&2, Heat Treatment Condition 2B As Per Table-5., Packing Instructi On: Stainless Steel Sheets, Coils And Plates:- A Stainless Steel Austenitic & Ferritic Steel Coils. The Coil Shall Be Protected In Reasonably Good Condition To Withstand Normal Handling Hazard During Transit With The Following Provision As The Barest Minimum: I Coil Should Be Wrapped With A Layer Of Water Proof Paper Through Out Whole Length. Ii Coil Should Be Wrapped With A Layer Of Biodegradeable Sheet. Iii O Uter & Inner Of Coil Should Be Wrapped With Gi Sheet. Iv Side Of The Coil Should Be C Overed With Card Board Sheet. V After This Whole Coil Should Be Wrapped With Biod Egradeable Plastic Sheet Of Suitable Thickness. Vi The Inner Edge Of The Coil Shoul D Be Protected By Gi Ring Followed By Another Iron Ring. Vii Outer Edge Of The Coil Should Be Wrapped With Gi Ring. Viii Coil Should Be Securely Strapped With Minium 5 Steel Bands Through The Eyes Of The Coil And Minium 3 Steel Bands On The Circumfer Ence Of The Eye. Ix Whole Coil Should Be Mounted On Wooden Blocks For Easy Liftin G/Stacking. X The Sheets In Coil Form For Thickness 2Mm And Above Shall Have: Inner Dia Of Coil 450-800Mm Outer Dia Of Coil 1000-1300Mm Weight Of Coil 2.4 - 10 Tonnes Xi The Sheets In Coil Form For Thickness Below 2Mm Shall Have: Inner Dia Of Coil 450-650Mm O Uter Dia Of Coil 1000-1300Mm Weight Of Coil 5.0 - 10 Tonnes. B Stainless Steel Austeniti C & Ferritic Steel Plates/Sheets I The Sheets/Plates Shall Be Supplied In Bundles Of Optimum Weight: 2Mt+/-10% & Each Sheet/Plate Shall Be Seprated With A Layer Of Wate R Proof Paper, After This The Whole Bundle Should Be Wrapped With Double Layer O F Water Proof Paper And A Biodegradeable Plastic Sheet Of Suitable Thickness. A Me Tal Protection In Edges Should Also Be Provided. Ii All Bundles Shall Have A Minimum Of 2 Hoops Upto 1.2 Meter In Length And One Extra Hoop For Every Additional Meter. The Bundles Shall Also Be Provided With Skid Wooden Packing Under Neath To Facili Tate Handling. Mechanical Damange & Corrosion During Transit If Any Shall Be At Th E Cost Of Supplier. Warranty Period: 30 Months After The Date Of Delivery Ferritic Steel Sheet 4X1250x3100 Mm., As Per Drawing: Rdso Spec. No. C-K201, Gra De X2crni12 409M Table 1&2, Heat Treatment Condition 2B As Per Table-5., Packing Instructi On: Stainless Steel Sheets, Coils And Plates:- A Stainless Steel Austenitic & Ferritic Steel Coils. The Coil Shall Be Protected In Reasonably Good Condition To Withstand Normal Handling Hazard During Transit With The Following Provision As The Barest Minimum: I Coil Should Be Wrapped With A Layer Of Water Proof Paper Through Out Whole Length. Ii Coil Should Be Wrapped With A Layer Of Biodegradeable Sheet. Iii O Uter & Inner Of Coil Should Be Wrapped With Gi Sheet. Iv Side Of The Coil Should Be C Overed With Card Board Sheet. V After This Whole Coil Should Be Wrapped With Biod Egradeable Plastic Sheet Of Suitable Thickness. Vi The Inner Edge Of The Coil Shoul D Be Protected By Gi Ring Followed By Another Iron Ring. Vii Outer Edge Of The Coil Should Be Wrapped With Gi Ring. Viii Coil Should Be Securely Strapped With Minium 5 Steel Bands Through The Eyes Of The Coil And Minium 3 Steel Bands On The Circumfer Ence Of The Eye. Ix Whole Coil Should Be Mounted On Wooden Blocks For Easy Liftin G/Stacking. X The Sheets In Coil Form For Thickness 2Mm And Above Shall Have: Inner Dia Of Coil 450-800Mm Outer Dia Of Coil 1000-1300Mm Weight Of Coil 2.4 - 10 Tonnes Xi The Sheets In Coil Form For Thickness Below 2Mm Shall Have: Inner Dia Of Coil 450-650Mm O Uter Dia Of Coil 1000-1300Mm Weight Of Coil 5.0 - 10 Tonnes. B Stainless Steel Austeniti C & Ferritic Steel Plates/Sheets I The Sheets/Plates Shall Be Supplied In Bundles Of Optimum Weight: 2Mt+/-10% & Each Sheet/Plate Shall Be Seprated With A Layer Of Wate R Proof Paper, After This The Whole Bundle Should Be Wrapped With Double Layer O F Water Proof Paper And A Biodegradeable Plastic Sheet Of Suitable Thickness. A Me Tal Protection In Edges Should Also Be Provided. Ii All Bundles Shall Have A Minimum Of 2 Hoops Upto 1.2 Meter In Length And One Extra Hoop For Every Additional Meter. The Bundles Shall Also Be Provided With Skid Wooden Packing Under Neath To Facili Tate Handling. Mechanical Damange & Corrosion During Transit If Any Shall Be At Th E Cost Of Supplier. Warranty Period: 30 Months After The Date Of Delivery

TRN :31701033
Central Government And Public Sector / Railway Transport
Kapurthala - Punjab

INDIAN Hire Our Expertise :

  • Tender Bidding
  • Tender Consultancy
  • Tender Advisory
  • Identify Eligibility Criteria
  • Identify Penelty Clauses
  • Highlight Important Dates
  • Technical Bid Preparation
  • Offline Bid Preparation
  • Online Bid Preparation
  • Offline Bid Submission
  • Online Bid Submission
  • Track Corrigendum / Addendums
  • Attend Pre Bid Meetings
  • Consistent Liaison & Coordination
  • EMD Follow Ups

INDIAN - bidding
image

We heartily welcome your move to excel your business to new heights.

Set Tender Alert

Activate daily alerts to know the tenders available of your work.

Get alerts

Bidding Support

Ask experts, how to fill bid forms, submit bids, participate in bids.

Get in touch

GeM Registration

Looking for GeM Registration? Get in touch with us and we will do the needful.

Registration

Digital Certificate

Get DSC for e-Tendering, e-Auction, e-bidding, Corporations / Associations / Others Tenders

Purchase now

Tender Awards

Want to know who's got the tender and are looking for subcontracting?

Connect now

Projects

Government and other private players, Real-time Updates of Project Information

Get info

International Tenders

We almost cover all the regions and countries across the world. Click to take your business to new heights.

Start now

Web Design

Get the Best Offers & Deals, expertise in developing static websites, dynamic websites and e-commerce.

Design now

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us

W B


Copyright ©2018 - Thetenders.com. Read Policies