Bidding Support

902654

Bidding Support

Warm Greetings from www.thetenders.com, the fastest growing tender information portal in India.

Procurement Of Sports Equipment - For Nsec Kolkata Hockey Ball Carry Cart It Should Have 500 Ball Carrying Capacity Metal Frame Steel / Iron Lacrosse Sticks Should Have Long Handle, Netted Sac At The Bottom Material- Synthetic Green Band Elastic / Rubber Band Level Of Resistance: 15Kg Yellow Band Elastic / Rubber Band Level Of Resistance: 25Kg Red Band Elastic / Rubber Band Level Of Resistance: 45Kg Black Band Elastic / Rubber Band Level Of Resistance: 60Kg Teeth Guard As Per Fih Guidelines Material- Mouldable Hockey Goal Post 1 Pair Should Be Made Of Aluminium To Increase Ease Of Portability Of The Goal Post. -75Mm X 50Mm Aluminium Profile Uprights And Crossbars. - The Front Profile Should Feature The Inbuilt Net Slots System The Meeting Fih Requirements. It Should Hold The Net Tightly And Neatly In Place Without The Requirement Of The Net Clips. -There Should Be 38Mm Diameter Anodized Tubes At Back With Net Hanging Freely As Per Fih Requirements. - Solid 38Mm Wheels Made Of Highly Durable Plastic Should Be Strongly Welded At Back Of The Goal Post For Easy Portability. - Backboard Should Be Made Of Thick Aluminium Check Red Anodized Sheet And All Inside Faces Are Padded With Thick Rubber Granules Coating Allowing Noise Reduction. - Should Have A Foldable Design That Reduces The Transportation And Storage Cost. - All Major Joints Should Be Strongly Welded For Superior Strength And Added Safety. - Should Have 5Mm Thick Braided Polypropylene Net. As Per Fih Guidelines The Goal Post And Cross-Bar Should Be White, Rectangular In Cross Section, 50Mm Wide And Between 50Mm And 75Mm Deep. The Distance Between The Inner Edges Of The Goal-Posts Should Be 3.66 Meters And The Distance From The Lower Edge Of The Cross-Bar To The Ground Should Be 2.14 Meters. Side-Boards And Backboard Should Be A Minimum Of 0.90 Metres Deep At The Cross-Bar And A Minimum Of 1.20 Metres Deep At Ground-Level. Small Goal Post 1Pair - Should Be 4Feet In Height, 6Feet Width, Depth 3Feet And Board Height 1 Feet -Cross Bars And Uprights Should Be Made Of Aluminium 75Mm X 50Mm. -Back Board And Side Board Should Be Made Of Wood -Thickness Of Board Should Be 45Mm. -Should Be Made Of Solid 38Mm Wheels, Highly Durable Plastic Strongly Welded At Back Of The Goal Post For Easy Portability. Tactics Board -Fibre Board, -Length- 16 Inches -Tall- 12 Inches -Dry Erase Board -Front Side Full Hockey Ground -Back Side Half Ground Agility Ladder Strap Material- Pvc, Polypropylene Number Of Rungs- 12, 5 Meter Agility Hurdles Material- Pvc Height- 6 Inch Width- 45Cm Agility Hurdles Material- Pvc Height- 12 Inch Width- 45Cm Agility Hurdles Material- Pvc Height- 18 Inch Width- 45Cm Hurdles For Training • Should Be Simple And Have Light Frame Made Of Tube Profiles Bent At A 90 Degree Angle. • Should Be Easy To Store • Should Be Powder Painted, Permanent Counterweights And Aluminium Telescope Tubes • Should Have Spring-Loaded Button System Of Height Adjustment. • Adjustable Height Levels: 686Mm, 762Mm, 838Mm, 914Mm, 991Mm, 1067Mm • Weight- 3 To 6 Kg High Jump Mat Dimensions: 6.0M X 4M X 71Cm Handles And Straps: Handles : 2 Inch 3500 T.C. Nylon Webbing Encased In Vinyl Knife Coated Fabric. Handles Are Sewn To Side Of Pit Below Zipper Flap. Triple Reinforced. Should Have Very High Tear Resistance Strength. Seams And Hems: Double Stitched, Double Folded And Double Stitched Again With High Tenacity 232 Polyester Thread, With At Least 5 Stitches To The Inch And No More Than 6 Stitches Foampolyuconstruction: Honeycomb Urethane Foam/ Pu Foam Core Combining Three Densities And Three Compressions In Lattice Configuration. Foam Covered With Weatherproof Material, With A Pvc Cover. Equipped With Spike Resistant Breather Fabric On Both Sides. Additional Wear And Tear Resistant Layer On Top. 2 Inch Foam Top Pad To Hold Entire Pit Securely In Place. Provides Safe Comfortable Landings. Prevents Landing Between The Units. The Mat Should Have A Rain Cover Also And A Fully Aluminium Bar Frame. The Aluminium Bar Frame Raises The Mat To Make Sure It Is Not Exposed To Water. Compliant To Iaaf Specifications Bosu Balance Trainer • Latex-Free, Burst-Resistant Material • 180 Day Limited Warranty • 6 Rubberized Feet • Holds Up To 136 Kg 300 Lbs. • Weight: 9 Kg 13 Lbs. • Diameter: 65 Cm • Height: 25.4 Cm 10” When Fully Inflated 40+3 Star Ball For Multi Open Ball Practice Plastic Seam Ball Should Be Ittf Approved. 40+ 3 Star Ball For Multi Ball Practice Should Have Seamless Poly-Plastic Material Gki, Dhs Premium Or Equivalent Carbon Fiber Table Tennis Ball Catch Net Table Tennis Ball Catch Net Should Have Been Made With Metal Brackets, Carbon Fibre Frame, 100% Polyster Net Should Be Lightweight, Durable, Compatible With Regulation Size Tt Table. Dimensions: 66X18x28 Inches L X D X H Ipong, Butterfly, Joola Or Equivalent. Plastic Basket Plastic Basket Should Be Of Medium Size For Table Tennis Ball Storage Kettlebell Should Be Of 2.5 Kg And 5Kg Kakss, Nivia, Strass Or Equivalent 10 Each Table Tennis Floor Mat Should Be 100% Pvc, 4.5Mm Thickness With Roll Length Of 20M And Width 1.5M Costing To Be Given For 2000 Sq.Ft. Area. Shock Absorption >25%, Vertical Deformation <3.5Mm, Sliding Coefficient 80 To 110, Ball Bounce>90%, Abrasion Resistance <1000Mg Impact Resistance >8 And Other Technical Specifications As For Flooring Mats Used For International Level Competitions And As Approved By Ittf. Stag Or Equivalent Table Tennis Table Arena Should Be Of 100% Polyster Of Size: 230Cm X 70 Cm. Height Must Be Not More Than 75 Cm Donic, Stag, Gki Or Equivalent Table Tennis Table Cover Should Be Of Nylon Material Of Size: 3M X 2M With Velcro Stag, Gki, Metco Or Equivalent Table Tennis Ball Trolley The Trolley Should Be With Wheel And Should Be Lightweight Size: 30X18x18 Inches. Stag, Joola Or Equivalent Ball Picker Table Tennis This Retractable Pole Should Be Made Of Aluminium Alloy And Should Be Light Weight Anti-Corrosion Min 100 Cm Length, Min 20 Cm Net Head Gki, Stag Or Equivalent. For Stc Agartala Agility Ladder Strap Material- Pvc, Polypropylene Number Of Rungs- 12, 5 Meter Agility Ladder Strap Material- Pvc, Polypropylene 8 Meter Hurdles For Competition •Should Be Strong And Made Of 50 Mm Square Steel Tube, Galvanized Version. • Should Be Pvc Coated Counter Weights Adjusted To Meet Precise Official Pullover Force At Each Of The 5 Heights. Height Should Be Adjustable By Easy Snap Locking System. • Special Design Makes It Easy To Stack In Minimum Space. - Adjustable Heights: 68.6 Cm, 76.2 Cm, 83.8 Cm, 91.4 Cm, 99.1 Cm, 106.7 Cm - Spring Back Hurdle For Both Directions - Durable Steel Frame - Padded Crossbar Adjustable Height: 68.6 Cm, 76.2 Cm, 83.8 Cm, 91.4 Cm, 99.1 Cm, 106.7 Cm Hurdles For Training • Should Be Simple And Have Light Frame Made Of Tube Profiles Bent At A 90 Degree Angle. • Should Be Easy To Store • Should Be Powder Painted, Permanent Counterweights And Aluminium Telescope Tubes • Should Have Spring-Loaded Button System Of Height Adjustment. • Adjustable Height Levels: 686Mm, 762Mm, 838Mm, 914Mm, 991Mm, 1067Mm • Weight- 3 To 6 Kg Take Off Board The Take-Off Board For Long And Triple Jump Should Have White Gloss Wood, Fixed On An Aluminium Frame With Levelling Bolts For Perfect Alignment With The Level Of The Track. It Should Be Equiped With A Red Foul Board For A Good Visibility By The Athlete. Should Be Delivered With Screw Extractors For Board Ease Of Handling. Iaaf-Certified Dimensions : 122 X 30 X 10 Cm Weight Jacket 2 Kg Weight Jacket 3 Kg Weight Jacket 5 Kg Training Marker • Material -Ldpe, Vinyl • Colour- Red, Blue, Green, Orange, Yellow • Should Be Made From Strong Vinyl • Should Be Light Weight Cones With Square Base For Stability Lane Ropes 1. Discs Should Be Made From Top Quality Uv Stabilised Co-Polymer Polypropylene 2.Cable Should Be Stainless Steel With Diameter Of 3.1Mm And Max Force Of 5Kn 4. Lane Ropes Should Come Along With Hooks Used For Binding The Ropes To The Pool, Long Clamp And Stainless Steel Hooks. 5. Anti Wave As In Should Not Generate Waves. Diameter-0.15 Mtrs 150Mm Length-50 Meters Should Be As Per Fina Standards And Used For Dividing Lanes In The Swimming Pools And Control The Waves Which Are Formed During Competition Or Practice. Flipper Full Mixed 1. Should Be Made Of Tpr, Soft Natural Rubber/ Silicone Material. 2. Should Have Open Heel For Ankle Flexibility. Dimensions:- S- 5-6 32X15.5 Cms M- 7-8 33X16 Cms L- 9-10 34X16.5 Cms Xl- 10-11 35X 17 Cms Can Be Used In Training With These Flippers Strengthen Ankles And Calf Muscles. Also Helps Develop A Faster Leg Kick And Improved Control. Flippers Breaststroke Should Be Made Of Tpr, Soft Natural Rubber/ Silicone Material. Should Have Open Heel For Ankle Flexibility. Reinforces Outward Angling And Rotation Of Feet. Dimensions:- M- 7-8 Uk L- 8-9 Uk Breast Stroke Fins Should Be Designed To Instruct And Reinforce The Proper Breast Stroke Kicking Position. Should Be Used In Learning Breaststroke Whip Kick Teaching And Learning Process. Mini Trampoline -Dimensions: 120 X 98 Cm Lxw -Reinforced Push Off Bed In Pvc 47 X 74 Cm With Central Cross Marking, Tightened By 34 Springs - 3 Cm Thick Peripheral Protection Pad - Integrated Castors - Non-Slip Pads - Weight: 27 Kg Mini Parallel Bar -Two-Piece Stable Basic Frame Of 200 Cm -4 Uprights With Adapter For The Basic Frame - Special Clamping Device -4 Low Sliding Tubes -Uprights 160 Cm -Height Adjustable In Steps From 85 To 125 Cm - Width-170 Cm -Adjustability- Height Adjustable From 85 To 125 Cm, With 5 Cm Increments. - Length- 200 Cm - Net Weight Kg- 58.00 -Gross Weight Kg- 64 For Stc Cuttack Agility Ladder Strap Material- Pvc, Polypropylene 8 Meter Agility Hurdles Material- Pvc Height- 6 Inch Width- 45Cm Agility Hurdles Material- Pvc Height- 12 Inch Width- 45Cm Agility Hurdles Material- Pvc Height- 18 Inch Width- 45Cm Take Off Board The Take-Off Board For Long And Triple Jump Should Have White Gloss Wood, Fixed On An Aluminium Frame With Levelling Bolts For Perfect Alignment With The Level Of The Track. It Should Be Equipped With A Red Foul Board For A Good Visibility By The Athlete. Should Be Delivered With Screw Extractors For Board Ease Of Handling. Iaaf-Certified Dimensions : 122 X 30 X 10 Cm Training Marker • Material -Ldpe, Vinyl • Colour- Red, Blue, Green, Orange, Yellow • Should Be Made From Strong Vinyl • Should Be Light Weight Cones With Square Base For Stability Discus 2.5 Kg • High Spin Discus Should Be Specially Designed And Manufactured For The Competition Stage • Rim Should Be Made Of Special Alloy Resistant To Corrosion • Should Have Synthetic Side Plates With High Fibreglass Content • The 80% Rim Weight Should Ensure A High Level Of Spin. Nelco/Ate Or Equivalent Drag Running Equipment Sports Resistance Umbrella • Size: 142 * 142 Cm About 56 Inches • Adjustable Waistline: About 50-110 Cm Hammer With Wire - 5 Each Should Be Cast Iron Precisely Machine Turned Hammer For Accurate Weight And Diameter. Should Be Come With World Athletics Approved Hammer Handles. 3 Kg, 97 Mm Hammer With Wire - 5 Each Should Be Cast Iron Precisely Machine Turned Hammer For Accurate Weight And Diameter. Should Be Come With World Athletics Approved Hammer Handles. 4 Kg, 102 Mm High Jump Mat Dimensions: 6.0M X 4M X 71Cmll Handles And Straps: Handles : 2 Inch 3500 T.C. Nylon Webbing Encased In Vinyl Knife Coated Fabric. Handles Are Sewn To Side Of Pit Below Zipper Flap. Triple Reinforced. Should Have Very High Tear Resistance Strength. Seams And Hems: Double Stitched, Double Folded And Double Stitched Again With High Tenacity 232 Polyester Thread, With At Least 5 Stitches To The Inch And No More Than 6 Stitches Foampolyuconstruction: Honeycomb Urethane Foam/ Pu Foam Core Combining Three Densities And Three Compressions In Lattice Configuration. Foam Covered With Weatherproof Material, With A Pvc Cover. Equipped With Spike Resistant Breather Fabric On Both Sides. Additional Wear And Tear Resistant Layer On Top. 2 Inch Foam Top Pad To Hold Entire Pit Securely In Place. Provides Safe Comfortable Landings. Prevents Landing Between The Units. The Mat Should Have A Rain Cover Also And A Fully Aluminium Bar Frame. The Aluminium Bar Frame Raises The Mat To Make Sure It Is Not Exposed To Water. Compliant To Iaaf Specifications Iron Shoe Pair Size:5 Iron Shoe Pair Size: 6 Iron Shoe Pair Size: 7 Iron Shoe Pair Size: 8 Iron Shoe Pair Size: 9 Javelin Should Be Made Of Hardened Best Quality Dura Aluminium. Designed And Crafted For Maximum Throw Distance. Javelin Head Should Be Made Of High Quality Steel For Extra Durability. Conclusively, Should Be One Of The Best Available Javelins • Throw Distance Up To 50 M • Weight : 500G The Body Precision Should Be Machined From Multi-Hardened Aluminium Alloy And Designed For Exceptional Durability And Stability, With Steel Tip And Tight Grip Winding. The Spears Should Be Specially Designed For Advanced And Ambitious Launchers. Should Be Characterized By The Centre Of Gravity Drawn Backwards. Characteristic Features Should Be The Excellent Sailing Characteristics With Optimum Power Transmission Values. Iaaf Certified. Ate/Crown Or Equivalent Javelin Should Be Made Of Hardened Best Quality Dura Aluminium. Designed And Crafted For Maximum Throw Distance. Javelin Head Should Be Made Of High Quality Steel For Extra Durability. Conclusively, Should Be One Of The Best Available Javelins • Throw Distance Up To 50 M • Weight Up To 600G The Body Precision Should Be Machined From Multi-Hardened Aluminium Alloy And Designed For Exceptional Durability And Stability, With Steel Tip And Tight Grip Winding. The Spears Should Be Specially Designed For Advanced And Ambitious Launchers. Should Be Characterized By The Centre Of Gravity Drawn Backwards. Characteristic Features Should Be The Excellent Sailing Characteristics With Optimum Power Transmission Values. Iaaf Certified. Ate/Crown Or Equivalent Javelin Should Be Made Of Hardened Best Quality Dura Aluminium. Designed And Crafted For Maximum Throw Distance. Javelin Head Should Be Made Of High Quality Steel For Extra Durability. Conclusively, Should Be One Of The Best Available Javelins • Throw Distance Up To 60 M • Weight Up To 700G The Body Precision Should Be Machined From Multi-Hardened Aluminium Alloy And Designed For Exceptional Durability And Stability, With Steel Tip And Tight Grip Winding. The Spears Should Be Specially Designed For Advanced And Ambitious Launchers. Should Be Characterized By The Centre Of Gravity Drawn Backwards. Characteristic Features Should Be The Excellent Sailing Characteristics With Optimum Power Transmission Values. Iaaf Certified. Ate/Crown Or Equivalent Javelin Should Be Made Of Hardened Best Quality Dura Aluminium. Designed And Crafted For Maximum Throw Distance. Javelin Head Should Be Made Of High Quality Steel For Extra Durability. Conclusively, Should Be One Of The Best Available Javelins • Throw Distance Up To 70 M • Weight Up To 800G The Body Precision Should Be Machined From Multi-Hardened Aluminium Alloy And Designed For Exceptional Durability And Stability, With Steel Tip And Tight Grip Winding. The Spears Should Be Specially Designed For Advanced And Ambitious Launchers. Should Be Characterized By The Centre Of Gravity Drawn Backwards. Characteristic Features Should Be The Excellent Sailing Characteristics With Optimum Power Transmission Values. Iaaf Certified. Ate/Crown Or Equivalent Relay Baton It Should Be A Set Of 8, Made Of The Finest Aluminium Alloy Which Conforms To The Iaaf Standards And Rules. Should Be Ideal For Senior Athletes And Should Be Extremely Light, Strong, And Durable. Should Be A Set Of 8 Anodized Batons In Multiple Colours Should Meet Iaaf Standards And Regulations. Nelco Or Equivalent Starting Block Should Be Super Heavy Duty Block Especially Designed For Top Athletes. All Aluminium Block With Centre Rail 100 Mm Wide X 900 Mm Long And Slotted Angles To Firmly Grip Pedals. Should Be Adjustable At Four Different Angles. All Pedals Should Be Fitted With Special Thick Rubber To Take In Spikes. It Should Be A Suitable Block For Synthetic Track And Should Come With Steel Plates. Should Be Flushed To Centre Rail. Iaaf Certified Nelco/ Asics Or Equivalent Weight Training Belt Should Be Easily Adjustable High Jump Cross Bar Should Be Of Top Quality Fibreglass. Which Should Ensures That They Will Not Sag. The High Jump Cross Bar Should Be 4 Metres In Length And Should Be Iaaf Certified.Nelco Or Equivalent Spring Board Should Be Made Of Heavy Duty Steel Frame And Springs. Frame Should Be Powder Coated For Durability Features : Aimed More At The Lighter Build 40 -75 Kg. With 5 Springs. Weight 23 Kg. Standardised 120 X 60 Cm Size Board In Curved Multiply Timber And Carbon Fibre Covered In Carpet. Height 23 Cm Javelin Stand Nelco/Stag Or Equivalent Agility Stick Material –Pvc, Plastic Gisco, Nivia Or Equivalent For Stc Hazaribagh Goalkeeper Kit High Rebound -It Should Be As Per Fih Guidelines, -Helmet Standard Quality Made Of Fibre / Poly Carbonate Material -Neck Guard -Standard Quality -Chest With Arm Guard Thickness- 30Mm -Padded Shorts Thickness -25Mm -Abdominal Guard- Standard -Leg Guard Thickness- Must Include: Hockey Leg Guard Hockey Kicker Hockey Chest Cum Arm Guard Hockey Gloves Hockey Helmet Hockey Neck Guard Hockey Abdominal Guard Hockey Padded Shorts Hockey Over T-Shirts Hockey Over Nicker Hockey Goalie Stick Composite Hockey Trolley Kit Bag With Wheel Hockey Kicker Strap Professional Size: Small Goalkeeper Kit High Rebound -It Should Be As Per Fih Guidelines, -Helmet Standard Quality Made Of Fibre / Poly Carbonate Material -Neck Guard -Standard Quality -Chest With Arm Guard Thickness- 30Mm -Padded Shorts Thickness -25Mm -Abdominal Guard- Standard -Leg Guard Thickness- Must Include: Hockey Leg Guard Hockey Kicker Hockey Chest Cum Arm Guard Hockey Gloves Hockey Helmet Hockey Neck Guard Hockey Abdominal Guard Hockey Padded Shorts Hockey Over T-Shirts Hockey Over Nicker Hockey Goalie Stick Composite Hockey Trolley Kit Bag With Wheel Hockey Kicker Strap Professional Size: Medium Hockey Balls Carry Cart It Should Have 500 Ball Carrying Capacity Metal Frame Steel / Iron Lacrosse Sticks Should Have Long Handle, Netted Sac At The Bottom Material- Synthetic Green Band Elastic / Rubber Band Level Of Resistance: 15Kg Yellow Band Elastic / Rubber Band Level Of Resistance: 25Kg Red Band Elastic / Rubber Band Level Of Resistance: 45Kg Black Band Elastic / Rubber Band Level Of Resistance: 60Kg Teeth Guard As Per Fih Guidelines Material- Mouldable Hockey Goal Post 1 Pair Should Be Made Of Aluminium To Increase Ease Of Portability Of The Goal Post. -75Mm X 50Mm Aluminium Profile Uprights And Crossbars. - The Front Profile Should Feature The Inbuilt Net Slots System The Meeting Fih Requirements. It Should Hold The Net Tightly And Neatly In Place Without The Requirement Of The Net Clips. -There Should Be 38Mm Diameter Anodized Tubes At Back With Net Hanging Freely As Per Fih Requirements. - Solid 38Mm Wheels Made Of Highly Durable Plastic Should Be Strongly Welded At Back Of The Goal Post For Easy Portability. - Backboard Should Be Made Of Thick Aluminium Check Red Anodized Sheet And All Inside Faces Are Padded With Thick Rubber Granules Coating Allowing Noise Reduction. - Should Have A Foldable Design That Reduces The Transportation And Storage Cost. - All Major Joints Should Be Strongly Welded For Superior Strength And Added Safety. - Should Have 5Mm Thick Braided Polypropylene Net. As Per Fih Guidelines The Goal Post And Cross-Bar Should Be White, Rectangular In Cross Section, 50Mm Wide And Between 50Mm And 75Mm Deep. The Distance Between The Inner Edges Of The Goal-Posts Should Be 3.66 Meters And The Distance From The Lower Edge Of The Cross-Bar To The Ground Should Be 2.14 Meters. Side-Boards And Backboard Should Be A Minimum Of 0.90 Metres Deep At The Cross-Bar And A Minimum Of 1.20 Metres Deep At Ground-Level. Small Goal Post 1Pair - Should Be In 4Feet Height, 6Feet Width, Depth 3Feet And Board Height 1 Feet -Cross Bars And Uprights Should Be Made Of Aluminium 75Mm X 50Mm. -Back Board And Side Board Should Be Made Of Wood -Thickness Of Board Should Be 45Mm. -Should Be Made Of Solid 38Mm Wheels, Highly Durable Plastic Strongly Welded At Back Of The Goal Post For Easy Portability. Tactics Board -Fibre Board, -Length- 16 Inches -Tall- 12 Inches -Dry Erase Board -Front Side Full Hockey Ground -Back Side Half Ground Shin Guard Type- Hockey Shin Guard Material- Hard Plastic / Washable And Velcro Strap Shell With A Protective Foam Face Mask For Hockey Player Material- Poly Carbonate Grill- No Straps- Yes Colour- Transparent Size: Small Face Mask For Hockey Player Material- Poly Carbonate Grill- No Straps- Yes Colour- Transparent Size: Medium Hand Protective Gloves Type Hockey Material- Lycra Three Fingered- Yes For Left Hand Rebound Board Should Be Made Of Aluminium Structure Covered With Polyurethane Foam Encased In A Weatherproof Pvc Cover Width-200Cm Height-35Cm Agility Hurdles Material- Pvc Height- 6 Inch Width- 45Cm Agility Hurdles Material- Pvc Height- 12 Inch Width- 45Cm Plyometric Box Height- 15 Cm Length- 61Cm Width- 61Cm Platform-Non Slip Rubber Stoppers Maximum Weight Support- 100Kg Should Be With Extra Foam Over The Wooden Material To Prevent Injury Plyometric Box Height- 30 Cm Length- 61Cm Width- 61Cm Platform-Non Slip Rubber Stoppers Maximum Weight Support- 100Kg Should Be With Extra Foam Over The Wooden Material To Prevent Injury Plyometric Box Height- 45 Cm Length- 61Cm Width- 61Cm Platform-Non Slip Rubber Stoppers Maximum Weight Support- 100Kg Should Be With Extra Foam Over The Wooden Material To Prevent Injury Plyometric Box Height- 60Cm Length- 61Cm Width- 61Cm Platform-Non Slip Rubber Stoppers Maximum Weight Support- 100Kg Should Be With Extra Foam Over The Wooden Material To Prevent Injury Hurdles For Competition •Should Be Strong And Made Of 50 Mm Square Steel Tube, Galvanized Version. • Should Be Pvc Coated Counter Weights Adjusted To Meet Precise Official Pullover Force At Each Of The 5 Heights. Height Should Be Adjustable By Easy Snap Locking System. • Special Design Makes It Easy To Stack In Minimum Space. - Adjustable Heights: 68.6 Cm, 76.2 Cm, 83.8 Cm, 91.4 Cm, 99.1 Cm, 106.7 Cm - Spring Back Hurdle For Both Directions - Durable Steel Frame - Padded Crossbar Adjustable Height: 68.6 Cm, 76.2 Cm, 83.8 Cm, 91.4 Cm, 99.1 Cm, 106.7 Cm Hurdles For Training • Should Be Simple And Have Light Frame Made Of Tube Profiles Bent At A 90 Degree Angle. • Should Be Easy To Store • Should Be Powder Painted, Permanent Counterweights And Aluminium Telescope Tubes • Should Have Spring-Loaded Button System Of Height Adjustment. • Adjustable Height Levels: 686Mm, 762Mm, 838Mm, 914Mm, 991Mm, 1067Mm • Weight- 3 To 6 Kg Take Off Board The Take-Off Board For Long And Triple Jump Should Have White Gloss Wood, Fixed On An Aluminium Frame With Levelling Bolts For Perfect Alignment With The Level Of The Track. It Should Be Equipped With A Red Foul Board For A Good Visibility By The Athlete. Should Be Delivered With Screw Extractors For Board Ease Of Handling. Iaaf-Certified Dimensions : 122 X 30 X 10 Cm Training Marker • Material -Ldpe, Vinyl • Colour- Red, Blue, Green, Orange, Yellow • Should Be Made From Strong Vinyl • Should Be Light Weight Cones With Square Base For Stability Discus 2.5 Kg • High Spin Discus Should Be Specially Designed And Manufactured For The Competition Stage • Rim Should Be Made Of Special Alloy Resistant To Corrosion • Should Have Synthetic Side Plates With High Fibreglass Content • The 80% Rim Weight Should Ensure A High Level Of Spin. Nelco/Ate Or Equivalent Drag Running Equipment Sports Resistance Umbrella • Size: 142 * 142 Cm About 56 Inches • Adjustable Waistline: About 50-110 Cm High Jump Mat Dimensions: 6.0M X 4M X 71Cmll Handles And Straps: Handles : 2 Inch 3500 T.C. Nylon Webbing Encased In Vinyl Knife Coated Fabric. Handles Are Sewn To Side Of Pit Below Zipper Flap. Triple Reinforced. Should Have Very High Tear Resistance Strength. Seams And Hems: Double Stitched, Double Folded And Double Stitched Again With High Tenacity 232 Polyester Thread, With At Least 5 Stitches To The Inch And No More Than 6 Stitches Foampolyuconstruction: Honeycomb Urethane Foam/ Pu Foam Core Combining Three Densities And Three Compressions In Lattice Configuration. Foam Covered With Weatherproof Material, With A Pvc Cover. Equipped With Spike Resistant Breather Fabric On Both Sides. Additional Wear And Tear Resistant Layer On Top. 2 Inch Foam Top Pad To Hold Entire Pit Securely In Place. Provides Safe Comfortable Landings. Prevents Landing Between The Units. The Mat Should Have A Rain Cover Also And A Fully Aluminium Bar Frame. The Aluminium Bar Frame Raises The Mat To Make Sure It Is Not Exposed To Water. Compliant To Iaaf Specifications Iron Shoe Pair Size:5 Iron Shoepair Size: 6 Iron Shoe Pair Size: 7 Iron Shoe Pair Size: 8 Iron Shoe Pair Size: 9 Javelin Should Be Made Of Hardened Best Quality Dura Aluminium. Designed And Crafted For Maximum Throw Distance. Javelin Head Should Be Made Of High Quality Steel For Extra Durability. Conclusively, Should Be One Of The Best Available Javelins • Throw Distance Up To 60 M • Weight Up To 600G The Body Precision Should Be Machined From Multi-Hardened Aluminium Alloy And Designed For Exceptional Durability And Stability, With Steel Tip And Tight Grip Winding. The Spears Should Be Specially Designed For Advanced And Ambitious Launchers. Should Be Characterized By The Centre Of Gravity Drawn Backwards. Characteristic Features Should Be The Excellent Sailing Characteristics With Optimum Power Transmission Values. Iaaf Certified. Ate/Crown Or Equivalent Javelin Should Be Made Of Hardened Best Quality Dura Aluminium. Designed And Crafted For Maximum Throw Distance. Javelin Head Should Be Made Of High Quality Steel For Extra Durability. Conclusively, Should Be One Of The Best Available Javelins • Throw Distance Up To 50 M • Weight Up To 700G The Body Precision Should Be Machined From Multi-Hardened Aluminium Alloy And Designed For Exceptional Durability And Stability, With Steel Tip And Tight Grip Winding. The Spears Should Be Specially Designed For Advanced And Ambitious Launchers. Should Be Characterized By The Centre Of Gravity Drawn Backwards. Characteristic Features Should Be The Excellent Sailing Characteristics With Optimum Power Transmission Values. Iaaf Certified. Ate/Crown Or Equivalent Javelin Should Be Made Of Hardened Best Quality Dura Aluminium. Designed And Crafted For Maximum Throw Distance. Javelin Head Should Be Made Of High Quality Steel For Extra Durability. Conclusively, Should Be One Of The Best Available Javelins • Throw Distance Up To 50 M • Weight Up To 800G The Body Precision Should Be Machined From Multi-Hardened Aluminium Alloy And Designed For Exceptional Durability And Stability, With Steel Tip And Tight Grip Winding. The Spears Should Be Specially Designed For Advanced And Ambitious Launchers. Should Be Characterized By The Centre Of Gravity Drawn Backwards. Characteristic Features Should Be The Excellent Sailing Characteristics With Optimum Power Transmission Values. Iaaf Certified. Ate/Crown Or Equivalent Relay Baton It Should Be A Set Of 8, Made Of The Finest Aluminium Alloy Which Conforms To The Iaaf Standards And Rules. Should Be Ideal For Senior Athletes And Should Be Extremely Light, Strong, And Durable. Should Be A Set Of 8 Anodized Batons In Multiple Colours Should Meet Iaaf Standards And Regulations. Nelco Or Equivalent Starting Block Should Be Super Heavy Duty Block Especially Designed For Top Athletes. All Aluminium Block With Centre Rail 100 Mm Wide X 900 Mm Long And Slotted Angles To Firmly Grip Pedals. Should Be Adjustable At Four Different Angles. All Pedals Should Be Fitted With Special Thick Rubber To Take In Spikes. It Should Be A Suitable Block For Synthetic Track And Should Come With Steel Plates. Should Be Flushed To Centre Rail. Iaaf Certified Nelco/ Asics Or Equivalent Weight Training Belt Should Be Easily Adjustable Body Flexibility Tester: Sit And Reach Box • This Sit N Reach Trunk Flexibility Box Should Be Used To Perform Sit And Reach Flexibility Tests • Standard Box Test Scales Should Include: Fitness, Program, Cooper Institute/Ymca, Aahperd • Results Should Be Read In Inches And Centimeters • Should Be Made Of Sturdy Powder-Coated Metal With A Built-In Foot Plate And A Maximum Stretch Indicator That Keeps Results Visible Until Reset • Start Point Should Be Easily Modified Per The Individual. • Sit And Reach Test Box Specifications Dimensions: 30 X 4 X 13 Weight: 7.25 Kg Baseline Standard Flexibility Tester Or Equivalent High Jump Cross Bar Should Be Of Top Quality Fibreglass. Which Should Ensures That They Will Not Sag. The High Jump Cross Bar Should Be 4 Metres In Length And Should Be Iaaf Certified.Nelco Or Equivalent High Jump Upright Set It Should Be Anodized Uprights With Built-In Levelling System. The Principal Section Should Be Fabricated Out Of O Purpose Designed Semi- Hollow Extruded Aluminium Profile. 140Mm X 59Mm X 5.5Mm Thickness Telescopic Tube Should Be Made Out Of 41 .5Mm Square Aluminium Profile Of 3Mm Thickness And Copped With High Quality Plastic. Should Be Zinc-Plated Steel Crossbar Peg Holders. Should Have Heavy Duty Powder Coated Steel Base With Wheels And Levellers. Sleeve Should Be Welded On Base To Provide Stability To Uprights. Nelco/Stag Or Equivalent Iron Roller 1.5 Tonne Type- Manual Material -Ms Capacity -1.5 Ton Colour -Yellow And Black • Pitch Roller Ms Manual • Roller Ms Sheet Thickness 15 Mm To 18 Mm • Net Weight : 900 Kg. • Gross Weight : 1500 Kg.After Filling Oil/Water • Rolling Width Of 36 Inches. • Extra Small Iron Roller Should Be Attached For Better Performance • Roller Handle Should Stand 1Mt. Above The Ground Level Easy To Push And Pull • Oil/Water Filling Cap •Should Be Easy To Drive With Minimum Effort Plastic Dome Diameter- 25Mm Weight- Light Weight Material- Plastic Colour- Multicolour Should Be Light Weight Plastic Base Which Can Be Used In Any Surface Spring Board Should Be Made Of Heavy Duty Steel Frame And Springs. Frame Should Be Powder Coated For Durability Features : Aimed More At The Lighter Build 40 -75 Kg. With 5 Springs. Weight 23 Kg. Standardised 120 X 60 Cm Size Board In Curved Multiply Timber And Carbon Fibre Covered In Carpet. Height 23 Cm Javelin Stand Nelco/Stag Or Equivalent For Stc Jalpaiguri Agility Ladder Strap Material- Pvc, Polypropylene Number Of Rungs- 12, 5 Meter Agility Ladder Strap Material- Pvc, Polypropylene 8 Meter Hurdles For Competition •Should Be Strong And Made Of 50 Mm Square Steel Tube, Galvanized Version. • Should Be Pvc Coated Counter Weights Adjusted To Meet Precise Official Pullover Force At Each Of The 5 Heights. Height Should Be Adjustable By Easy Snap Locking System. • Special Design Makes It Easy To Stack In Minimum Space. - Adjustable Heights: 68.6 Cm, 76.2 Cm, 83.8 Cm, 91.4 Cm, 99.1 Cm, 106.7 Cm - Spring Back Hurdle For Both Directions - Durable Steel Frame - Padded Crossbar Adjustable Height: 68.6 Cm, 76.2 Cm, 83.8 Cm, 91.4 Cm, 99.1 Cm, 106.7 Cm Take Off Board The Take-Off Board For Long And Triple Jump Should Have White Gloss Wood, Fixed On An Aluminium Frame With Leveling Bolts For Perfect Alignment With The Level Of The Track. It Should Be Equiped With A Red Foul Board For A Good Visibility By The Athlete. Should Be Delivered With Screw Extractors For Board Ease Of Handling. Iaaf-Certified Dimensions : 122 X 30 X 10 Cm Weight Jacket 2 Kg Weight Jacket 3 Kg Weight Jacket 5 Kg Drag Running Equipment Sports

TRN :21294404
Central Government And Public Sector / Sports And Health Services
Kolkata - West Bengal

INDIAN Hire Our Expertise :

  • Tender Bidding
  • Tender Consultancy
  • Tender Advisory
  • Identify Eligibility Criteria
  • Identify Penelty Clauses
  • Highlight Important Dates
  • Technical Bid Preparation
  • Offline Bid Preparation
  • Online Bid Preparation
  • Offline Bid Submission
  • Online Bid Submission
  • Track Corrigendum / Addendums
  • Attend Pre Bid Meetings
  • Consistent Liaison & Coordination
  • EMD Follow Ups

INDIAN - bidding
image

We heartily welcome your move to excel your business to new heights.

Set Tender Alert

Activate daily alerts to know the tenders available of your work.

Get alerts

Bidding Support

Ask experts, how to fill bid forms, submit bids, participate in bids.

Get in touch

GeM Registration

Looking for GeM Registration? Get in touch with us and we will do the needful.

Registration

Digital Certificate

Get DSC for e-Tendering, e-Auction, e-bidding, Corporations / Associations / Others Tenders

Purchase now

Tender Awards

Want to know who's got the tender and are looking for subcontracting?

Connect now

Projects

Government and other private players, Real-time Updates of Project Information

Get info

International Tenders

We almost cover all the regions and countries across the world. Click to take your business to new heights.

Start now

Web Design

Get the Best Offers & Deals, expertise in developing static websites, dynamic websites and e-commerce.

Design now

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us

W B


Copyright ©2018 - Thetenders.com. Read Policies