Bidding Support

390535

Bidding Support

Warm Greetings from www.thetenders.com, the fastest growing tender information portal in India.

Supply Of Machinery And Equipment - Steel Rule 15 Cm With Metric Graduation Hss Divider 15 Cm Spring Straight Scriber 15 Cm. Hcs Hardened And Temprerd Hrc 40-45 Centre Punch 10 Cm Hcs Hardened And Temprerd Hrc 40-45 Screw Driver 15 Cm Chisel Cold Flat 20 Cm Hcs Hardened And Temprerd Hrc 40-45 File Flat 25 Cm. Second Cut With Handle File Flat 25 Cm. Smooth With Handle File Half Round Second Cut 15 Cm.With Handle Hacksaw Frame 30 Cm Fixed . Safety Googles. Transparent Dot Slot Punch 10 Cm.Material Hcs Hardened And Temprerd Hrc 40-45 Steel Rule 30Cm With Metric And British Graduation Hss Steel Rule 60 Cm Metric And British Graduation Hss Surface Plate 600 × 600 X 100 Mm Ci / Granite.With Stand 3.5 Angle Plate 150X150x250 Spirite Level Metal Type -23, Accuracy 0.1Mm /M 300Mm File Wardending 15 Cm Smooth With Handle File Knife Edge 15Cm Smooth With Handle File Cut Saw 15Cm Smooth With Handle File Feather Edge 15Cm Smooth With Handle File Triangular 20Cm Smooth With Handle File Round 20 Cm Second Cut With Handle File Square 25 Cm Second Cut With Handle File Triangular 20 Cm Second Cut With Handle File Flat 30 Cm Second Cut With Handle File Flat20 Cm Bastard With Handle File Flat 30 Cm Bastard With Handle File Swiss Type Needle Set Of 12 File Half Round 25 Cm Bastard With Handle File Round 30 Cm Bastard With Handle File Hand 15 Cm Second Cut With Handle Card File 3X 5 Brass Or Steel Spanner D. E 6-26 Mm Set Of 10 Pcs Clamp C 20 Cm Scraper Flat 15Cm With Hendle Scraper Triagngular 15Cm With Hendle Scraper Half Round 15Cm With Hendle Chisel Cold 9 Mm Cross Cut 9Mm Diamond Hcs Hardened And Tempered Chisel Cold 19 Mm Flat Hcs Hardened And Tempered Chisel Cold 9Mm Round Nose Hcs Hardened And Tempered Stud Extractor Ezy - Out Set Of 8 Micrmeter 25-50Mm Outside Mitutoyo With List Count 00.01Mm Vernier Caliper 15Cm Mitutoyo With List Count 00.02Mm Adjustable Pipe Tap Set Bsp With Die Set Cover Pipe Size 15, 20, 25, 32, 38, 50Mm Wheel Dresser One For 4 Units Diamond Brazed Machine Vice 100Mm Swivel Base Different Profile Gauges Plate Type- For Demonstration Metric Standard Plate Type 150Mm 250 Mm, 300Mm Knurling Tool Diamond, Straight & Diagonal Indexable Boring Bar With Inserts 1Shank Machine Maintenance Mannuals, For Latheall Gear Type, Pedestal Grinder, Dril Lm/C, Power Saw. Terparature Gauge Range 0-150*C Dowel Pin Straight Dia, - 1 Lenth -4 Mat: Stainless Steel Standard Tap Screws M3, M4, M5, M6, M8, M10, M12, M14, M16 Lapping Plate Dia 6 Dia Medium Carbon Heat Treated Alloy Steel Metric Studs And Bolts Along With Nuts M6.M8.M10.M12.M14.M16.Standard Caps Screw M6.M8.M10.M12. Drill Gauges Letter Drill Gauge A To Z No. Dill Gauge 1-60, Metric Drill Gauge 1.5Mm To 12.5Mm -30 Holes Cast Iron Globe Valve Flanged Type 2 Or Above C.L Sluice/ Gate Valve Flanged Type 150Nb, Class# 150 Flange: Ansi 125- B 16.1 Stop Cock 25Nb 2-Way, Threaded End Slip On Forget Steel Flange 150 Nb Ansi-B16.5, Class #150 Pipe Threading Die With Handle Ratchet Type Die Head Of 1/2, 3/4 And 1 Jigs & Fixture Sample For Demostration May Be Manufactured In - House Plate Type, Box Zig, Channel Zig, Sand Wach Zig Woth Hardened Bushes Hrc 45- 50 Pulleys For V-Belt Or Flat Belt To Fit On 50Mm Dia. Shaft With Key Slot For V-Belt Or Flat Belt To Fit On 50Mm Dia Damaged Old Spur Gear To Fit 50Mm Dia. Shaft Fit On 50Mm Dia Flat Belt 100Mm X 5000Mm To Fit On Pulley Packing Gasketmaterial Ptfe Gasket Small Role Washer, Clutch, Keys, Jib, Cotter & Circlip Minimum 25Mm Size, Carbon Stel Material Bearing Different Types -Each Type Of Diameter 25Mm Min. Lifting Sling -8Mm Nominal Dia. Single Leg Sling Bearing Extract Or Universal -Gear Puller 2 Or 3 Jaws Adjustable Pulley Extractor Gear Puller 2 Or 3 Jaws Adjustable Prick Punch Hcs Hrc 45-50, 150Mm Length Snips Straight 25Cm Digital Micrometer Digital Vernier Caliper 0-150 Mm L.C 0.001 Mm .Optional Compressor Unit : Suitable For Pressure:8 Bar, Delivery :50 Lpm Or More, Resevoir Capacity :24 Litres Or More 230 V, 50 Hz, With Pressure Regulaor And Water Separator Pneumatic Trainer Kit Each Consisting Of The Following Matching Componets And Accessories :Max.Stroke Length 50 Mm, Bore Dia 20 Mm I.Single Acting Cylinder Ii. Double Acting Cylinder :Max .Stroke Length 100 Mm, Bore Dia 20 Mm, Magnetic Type Iii.3/2-Way Valve :Manually -Actuated, Normally Closed Iv.3/2 Way Valve :Manually -Actuated, Normally Closed V.One Way Flow Control Valve :Manually -Actuated, Normally Closed Vi.5/2 - Way Valve :Manually -Actuated, Normally Closed Vii. 5/2 -Way Valve :Manually -Actuated, Normally Closed Viii. 5/2 - Way Pneumatic Actuated Valve Ix.3/2-Way Roller Lever Valve :Manually -Actuated, Normally Closed X.Shuttle Valve Or :Manually -Actuated, Normally Closed Xi.Two-Pressure Valve And :Manually -Actuated, Normally Closed Xii.Presssure Gauge :Manually -Actuated, Normally Closed Xiii.Manifold With Self-Closing Xiv. Pushbutton Station For Elecsing Signal Input Xv. Relay Station :Manually -Actuated, Normally Closed Xvi. 3/2- Way Single Solenoid Valve :Manually -Actuated, Normally Closed Xvii. 5/2- Way Single Soleniod Valve :Manually -Actuated, Normally Closed Xiii. 5/2- Way Single Soleniod Valve :Manually -Actuated, Normally Closed Xix. Power Supply Unit, Xx. Profile Plate, Anodised Aluminium :Manually -Actuated, Normally Closed Penumatic Workstation With 40 Square Mm Aluminium Profile Lega, Wooden Work Surface And Pedestal Drawer Unit Having 5 Drawers, Each With Handels And Individual Locks, On Metallic Full Panel Drawer Slide:1 Work Table - Size Approx.L1200mm Xw900mmxh900mm, With Four Castor Wheels Including Two Lockable Wheels At The Front Side, 2 Drawer - Size Approx.- L460mmxw495mm Xh150mm Each, And Overall Size Of Drawer Unitapprox.-L470mmxw495mmxh825mm And 3 Drawer Slide Height Approx 85Mm Carrier For Mounting Components, Such As Pb & Relay Boxes. Cut Section Model For Pneumatic Components :- 1.Single Acting Cylinder, 2. Double Acting Cylinder Max .Stroke Length 100 Mm, Bore Dia 20 Mm, Magnetic Type, 3. 3/2-Way Valve Manually -Actuated, Normally Closed 4.3/2 Way Valve :Manually -Actuated, Normally Closed, 5. One Way Flow Control Valve :Manually -Actuated, Normally Closed 6. 5/2 - Way Valve :Manually -Actuated, Normally Closed 7. 5/2 -Way Valve :Manually -Actuated, Normally Closed 8. 5/2 - Way Pneumatic Actuated Valve, 9. 3/2-Way Roller Lever Valve :Manually -Actuated, Normally Closed, 10. Shuttle Valve Manually -Actuated, Normally Closed, 11. Two-Pressure Valve And Manually -Actuated, Normally Closed, 12. Manifold With Self-Closing. Hydraulic Workstation With 40 Square Mm Aluminium Profile Legs, Wooden Work Surface, And One Pedestal Drawer Unit Having 5 Drawers, Each With Handles And Individual Locks, On Metallic Full Panel Drawer Slide:1 Worktable – Size Approx. L1200mmxw900mmxh900 Mm, With Four Castor Wheels Including Two Lockable Wheels At The Front Side, 2 Drawer – Size Approx. – L460mmxw495mm Xh158mm Each, And Overall Size Of Drawer Unit Approx. L470mmxw495mmxh825m M And 3 Drawer Slide Height Approx. 85Mm. Cut- Section Models For Hydraulic Components Pressure Relief Valve Pilot-Operated 2. Four-Way Distributor With Five Ports 3. Double Acting Hydraulic Cylinder With A Control Cam, Piston Diameter16 Mm 4. 3/2-Way Directional Control Valve With Hand Lever Actuation 5. 4/2-Way Directional Control Valve With Hand Lever Actuation. 6. 4/3-Way Directional Control Valve Closed-Centre Position. 7 Non-Return Valve 8. Pilot-Operated Check Valve Pilotto Open 9. One-Way Flow Control Valve With Integrated Check Valve . For Fitter Trade

TRN :19927186
State Government / Education And Research Institutes
Mandi (Hp) - Himachal Pradesh

INDIAN Hire Our Expertise :

  • Tender Bidding
  • Tender Consultancy
  • Tender Advisory
  • Identify Eligibility Criteria
  • Identify Penelty Clauses
  • Highlight Important Dates
  • Technical Bid Preparation
  • Offline Bid Preparation
  • Online Bid Preparation
  • Offline Bid Submission
  • Online Bid Submission
  • Track Corrigendum / Addendums
  • Attend Pre Bid Meetings
  • Consistent Liaison & Coordination
  • EMD Follow Ups

INDIAN - bidding
image

We heartily welcome your move to excel your business to new heights.

Set Tender Alert

Activate daily alerts to know the tenders available of your work.

Get alerts

Bidding Support

Ask experts, how to fill bid forms, submit bids, participate in bids.

Get in touch

GeM Registration

Looking for GeM Registration? Get in touch with us and we will do the needful.

Registration

Digital Certificate

Get DSC for e-Tendering, e-Auction, e-bidding, Corporations / Associations / Others Tenders

Purchase now

Tender Awards

Want to know who's got the tender and are looking for subcontracting?

Connect now

Projects

Government and other private players, Real-time Updates of Project Information

Get info

International Tenders

We almost cover all the regions and countries across the world. Click to take your business to new heights.

Start now

Web Design

Get the Best Offers & Deals, expertise in developing static websites, dynamic websites and e-commerce.

Design now

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us

W B


Copyright ©2018 - Thetenders.com. Read Policies