Bidding Support

729649

Bidding Support

Warm Greetings from www.thetenders.com, the fastest growing tender information portal in India.

Various Works - Dismantling Artificial Stone Flooring Upto 50 Mm. Thick By Carefully Chiselling Without Damaging The Base And Removing Rubbish As Directed Within A Lead Of 75 M. In Ground Floor Including Roof. Stripping Off Worn Out Plaster And Raking Out Joints Of Walls, Celings Etc. Upto Any Height And In Any Floor Including Removing Rubbish Within A Lead Of 75M As Directed. Single Brick Flat Soling Of Picked Jhama Bricks Including Ramming And Dressing Bed To Proper Level And Filling Joints With Local Sand. Brick Work With 1St Class Bricks In Cement Mortar 1:6 In Foundation And Plinth 125 Mm. Thick Brick Work With 1St Class Bricks In Cement Mortar 1:4 In Ground Floor. Ordinary Cement Concrete Mix 1:1.5:3 With Graded Stone Chips 20 Mm Nominal Size Excluding Shuttering And Reinforcement If Any, In Ground Floor As Per Relevant Is Codes. Pakur Variety In Gr Floor Ordinary Cement Concrete Mix 1:2:4 With Graded Stone Chips 6Mm Nominal Size Excluding Shuttering And Reinforcement, If Any, In Gound Floor As Per Relevant Is Codes. Pakur Variety In Gr Floor Artificial Stone In Floor, Dado, Staircase Etc With Cement Concrete 1:2:4 With Stone Chips, Laid In Panels As Directed With Topping Made With Ordinary Or White Cement As Necessary And Marble Dust In Proportion 1:2 Including Smooth Finishing And Rounding Off Corners Including Raking Out Joints Or Roughening Of Concrete Surface And Application Of Cement Slurry Before Flooring Works Using Cement @ 1.75 Kg/Sq.M All Complete Including All Materials And Labour 3 Mm. Thick Topping High Polishing Grinding On This Item Is Not Permitted With Ordinary Cement. Using Grey Cement 35 Mm. Thick Supplying, Fitting & Fixing 1St Quality Ceramic Tiles In Walls And Floors To Match With The Existing Work & 4 Nos. Of Key Stones 10Mm Fixed With Araldite At The Back Of Each Tile & Finishing The Joints With White Cement Mixed With Colouring Oxide If Required To Match The Colour Of Tiles Including Roughening Of Concrete Surface, If Necessary Or By Synthetic Adhesive & Grout Materials Etc. Floor With Sand Cement Mortar 1:4 20 Mm Thick & 2 Mm Thick Cement Slurry At Back Side Of Tiles Using Cement @ 2.91 Kg/Sq.M & Joint Filling Using White Cement Slurry @ 0.20Kg/Sq.M. Area Of Each Tile Above 0.09 Sq.M Coloured Decorative, In Gr Fl Wall With Sand Cement Mortar 1:3 15 Mm Thick & 2 Mm Thick Cement Slurry At Back Side Of Tiles Using Cement @ 2.91 Kg/Sq.M & Joint Filling Using White Cement Slurry @ 0.20Kg/Sq.M. Area Of Each Tile Above 0.09 Sq.M Coloured Decorative, In Gr Fl Taking Out Old Damaged Tarfelt From The Roof, Parapet Etc. Preparing The Roof Surfaces By Removing All Spoils, Blisters, Moss Etc. From The Working Site And Disposal Of The Same Beyond The Compound And Cleaning The Site In All Respect As Per Direction Of Engineer-In-Charge. Supplying & Laying 3Mm Thick Pre-Fabricated Plastomeric Water Proofing Membrane Conforming To En 12311-1 & Astmd 5147, Manufactured With Atactic Poly Propylene App Modified Premium Grade Asphalt, Specially Reinforced With Non-Woven Polyester Core With Polyester Reinforcement @160 Gms Per Sqm & Both Faces Covered With Thermo-Fusible Polyethylene Film /Mineral On Top Face Over A Coat Of Primer @ 0.40 Lit/Sqm Of Manufacturers Specification On Smooth, Clean Dry Surface Prepared Wherever Required.Lap Joint Shall Be Provided Of 75 Mm In Longitudinal & 100 Mm In Transverse Direction And Fused Using Lpg/ Propane Torch Employing Extra Care Ensuring Full Bondage, Complete Removal Of Entrapped Air And Sealing Edges Into Grooves In Appropriate Manner As Per Direction Of Engineer -In-Charge All Complete Including Materials, Labour And Applicable Taxes. Payment Shall Be Made On The Basis Of Finished Surface Area.. Membrane Property: Softening Point > 150 Deg C, Cold Flexibility < -6 Deg C, Tensile Strength, N/Cm : 600 Longitudinal, 450 Transverse, Tearing Strength, N: 300 Longitudinal, 200 Transverse M.S.Or W.I. Ornamental Grill Of Approved Design Joints Continuously Welded With M.S, W.I. Flats And Bars Of Windows, Railing Etc. Fitted And Fixed With Necessary Screws And Lugs In Ground Floor. Grill Weighning Above 16 Kg Wood Work In Door And Window Frame Fitted And Fixed In Position Complete Including A Protective Coat Of Painting At The Contact Surface Of The Frame Exluding Cost Of Concrete, Iron Butt Hinges And M.S Clamps. The Quantum Should Be Correted Upto Three Decimals. Sal : Malayasian, In Gr Fl Supplying, Fitting And Fixing Fibre Reinforced Polymer Frp Composite Door Frame As Per Approved Section With Glass Fibre Reinforced Plastic Moulded Skins And A Special Sandwich Core, So As To Impart Monolitaheic Composite Structure As Per Approved Technology Of Department Of Science And Technology Dst To Safisfy Is: 4020 Door Testing Performance Criteria. 66Mm X 90Mm Z-Batten Shutters Of Door And Window As Per Design Havings Tongued And Groovehalf Lap Jointed As Per Direction Of The Engineer-In-Charge Including Fitting And Fixing Shutter In Position, But Excluding The Cost Of Hinges And Other Fittings In Ground Floor. Sal : Local, In Gr Fl Supplying, Fitting & Fixing Fibre Reinforced Polymer Frp Composite Door Shutters As Per Approved Design With Glass Fibre Reinforced Plastic Moulded Skins And A Special Sandwich Core, So As To Impart Monolitaheic Composite Structure As Per Approved Technology Of Department Of Science And Technology Dst To Satisfy Is:4020 Door Testing Performance Criteria. 32 Mm Thick Wood Work In Beams And Burgahs Fitted And Fixed In Position Complete. Cost For Repairing Of Damage To Be Paid Separately Sal : Local Supplying, Fitting, Fixing Fly / Mosquito Proof Nylon Net On Any Type Of Window, Door Shutter Frame With Necessary Fixing Arrangements Complete. Supplying, Fitting And Fixing M.S. Clamps For Door And Window Frame Made Of Flat Bent Bar, End Bifurcated With Necessary Screws Etc. By Cement Concrete1:2:4 As Per Direction. Cost Of Concrete Will Be Paid Separately 40Mm X 6Mm, 200Mm Length 40Mm X 6Mm, 125Mm Split Shank Iron Door Ring Fitted And Fixed Complete 75Mm Dia. Anodised Aluminium Barrel / Tower / Socket Bolt Full Covered Of Approved Manufactured From Extruded Section Conforming To I.S. 204/74 Fitted And Fixed With Cadmium Plated Screws: 150Mm Long X 10Mm Dia. Bolt. 225Mm Long X 10Mm Dia. Bolt. Anodised Aluminium Aldrop / Sliding Bolts Of Approved Quality Manufactured From Extruded Section Conforming To I.S. Specification I.S. 2681/66 Fitted And Fixed Complete. 250Mm X 16Mm Dia Bolt Anodised Aluminium Butt Hinges Of Approved Quality Manufactured From Extruded Section Conforming To I.S. Specification I.S. 205/66 And Fitted And Fixed With Cadmium Plated Screws: 100 X 63 X 3.2Mm. Anodised Aliminium D-Type Handle Of Approved Quality Manufactured From Extruded Section Conforming To I.S. Specification I.S. 230/72 Fitted And Fixed Complete: With Round Base: 100 Mm Grip X 10 Mm Dia Rod. 125 Mm Grip X 10 Mm Dia Rod. Renewing 125Mm Long Wooden Buffer Block With Sal : Malayasian Plaster To Wall, Floor, Ceiling Etc. With Sand And Cement Mortar Including Rounding Off Or Chamfering Corners As Directed And Raking Out Joints Including Throating, Nosing And Drip Course, Scaffolding/Staging Where Necessary Ground Floor.Excluding Cost Of Chipping Over Concrete Surface With 1:6 Cement Mortar 20 Mm Thick Plaster Gr. Floor 15 Mm Thick Plaster Ground Floor With 1:4 Cement Mortar 10 Mm Thick Plaster Ground Floor Acrylic Distemper To Interior Wall, Ceiling With A Coat Of Solvent Based Interior Grade Acrylic Primer As Per Manufacturers Specification Including Cleaning And Smoothning Of Surface. Two Coats Priming One Coat On Steel Or Other Metal Surface With Synthetic Oil Bound Primer Of Approved Quality Including Smoothening Surfaces By Sand Papering Etc. Priming One Coat On Timber Or Plastered Surface With Synthetic Oil Bound Primer Of Approved Quality Including Smoothening Surfaces By Sand Papering Etc. Painting With Best Quality Synthetic Enamel Paint Of Approved Make And Brand Including Smoothening Surface By Sand Papering Etc. Including Using Of Approved Putty Etc. On The Surface, If Necessary On Timber Or Plastered Surface With Super Gloss Hi-Gloss - Two Coats With Any Shade Except White On Steel Or Other Metal Surface : With Super Gloss Hi-Gloss - Two Coats With Any Shade Except White Supplying, Fitting And Fixing Gunmetal Wheel Valve Of Approved Brand And Make Tested To 21 Kg Per Sq. Cm. For Water Lines Only. 40 Mm Dia 25 Mm Dia Supplying, Fitting And Fixing Bib Cock Or Stop Cock. Chromium Plated Stop Cock Equivalent To Code No. 513A & 513B & Model - Tropical / Sumthing Special Of Essco Or Similar Ptmt Polytetra Bib Cock / Stop Cock Prayag Or Equivalent 15 Mm Thick Supplying, Fitting And Fixing Pvc Pipes Of Approved Make Of Medium Duty Conforming To Astmd - 1785 And Threaded To Match With Gi Pipes As Per Is : 1239 Part - I. With All Necessary Accessories, Specials Viz. Socket, Bend, Tee, Union, Cross, Elbo, Nipple, Longscrew, Reducing Socket, Reducing Tee, Short Piece Etc. Fitted With Holder Bats Clamps, Including Cutting Pipes, Making Threads, Fitting, Fixing Etc. Complete In All Respect Including Cost Of All Necessary Fittings As Required, Jointing Materials And Two Coats Of Painting With Approved Paint In Any Position Above Ground. Payment Will Be Made On The Centre Line Measurements Of Total Pipe Line Including All Specials. No Separate Payment Will Be Made For Accesories, Specials. Payment For Painting Will Be Made Seperately For Exposed Work Pvc Pipes Dia 15 Mm 20 Mm Supplying, Fitting And Fixing 10 Litre P.V.C. Low-Down Cistern Conforming To I.S. Specification With P.V.C. Fittings Complete, C.I. Brackets Including Two Coats Of Painting To Bracket Etc. Supplying, Fitting And Fixing Approved Brand P.V.C. Connector White Flexible, With Both Ends Coupling With Heavy Brass C.P. Nut, 15 Mm Dia. 600 Mm Long Supply Of Upvc Pipes B Type & Fittings Conforming To Is-13592-1992 Single Socketed 3 Meter Length 110 Mm Fittings Door Tee 110 Mm Bend 87.5º 110 Mm Vent Cowl 110 Mm Pipe Clip 110 Mm Labour For Fitting And Fixing U.P.V.C. Pipes For Above Ground Work Including Cost Of Jointing Materials Etc. Fitting And Fixing All Necessary Specials, Cutting Pipes, Cutting Holes In Walls Or R.C. Floor Where Necessary And Mending Good All Damages Excluding The Cost Of Masonry Or Concrete Work, If Necessary, But Including The Cost And Fitting And Fixing Holder Bat Clamps Any Floor Or For Underground Work Including Cutting Trenches Upto 1.5 Metre And Refilling The Same Complete As Per Direction Of The Engineer-In-Charge. Payment Will Be Made On Centre Line Measurement Of The Total Pipeline Including Specials. Above Ground 110 Mm Dia. Under Ground 160 Mm Dia. Supplying, Fitting And Fixing Anglo-Indian W.C. In White Glazed Vitreous China Ware Of Approved Make Complete In Position With Necessary Bolts, Nuts Etc. With P Trap With Vent Supplying, Fitting And Fixing Orissa Pattern Water Closet In White Glazed Vitreous Chinaware Of Approved Make In Position Complete Excluding P Or S Trap Excluding Cost Of Concrete For Fixing. 530 Mm X 410 Mm Supplying, Fitting And Fixing Flat Back Urinal Half Stall Urinal In White Vitreous Chinaware Of Approved Make In Position With Brass Screws On 75 Mm X 75 Mm X 75 Mm Wooden Blocks Complete. 635 Mm X 395 Mm X 420 Mm Supplying, Fitting And Fixing Closet Seat Of Approved Make With Lid And C.P. Hinges, Rubber Buffer And Brass Screws Complete. Anglo Indian Plastic Hallow Type Black Supplying, Fitting And Fixing Bevelled Edged Mirror 5.5 Mm Thick Silver Red As Per I.S. 3438 / 1965 Together With Brass C.P. Hinges. 600 Mm X 450 Mm Supplying, Fitting And Fixing Glass Shelf With Aluminium Guard Rails. Ordinary Type With 5.5 Mm Sheet Glass 450 Mm X 125 Mm Supplying, Fitting And Fixing Towel Rail With Two Brackets. C.P. Over Brass 25 Mm Dia. And 750 Mm Long Constructing Inspection Pit Of Inside Measurement 600Mm X 600Mm X Upto 600Mm Depth With 250 Mm Thick 1St. Class Brick Work In Cement Mortar 1:4 On All Sides, Bottom Of The Pit Consisting Of 100 Mm Thick Cement Concrete 1:3:6 With Stone Chips Over A Layer Of Jhama Brick Flat Soling, 15 Mm Thick 1:4 Cement Plaster To Inside Walls And Out-Side Walls Upto G.L. And 20 Mm.Thick 1:4 Plaster To Bottom Of The Pit, Providing Necessary Invert With Cement Concrete 1:3:6 With Stone Chips As Per Direction, Neat Cement Finishing To Entire Internal Surfaces, Top Of The Pit Covered With 100 Mm Thick R.C.C. Slab 1:1.5:3 With Stone Chips And Necessary Reinforcements Upto 1% And Shuttering Including 6 Mm Thick Cement Plaster 1:4 In All External Surfaces Of The Slab And One 560 Mm Dia. R.C.C. Manhole Cover Of Approved Make Supplied, Fitted And Fixed In The Slab With Necessary Fittings, Necessary Earthwork In Excavation In All Sorts Of Soil, Filling Sides Of The Pit With Earth And Removing Spoils After Work Complete In All Respect With All Costs Of Labour And Materials. With Pakur Variety. Sail/Tata/Rinl Construction Of Septic Tank Of Different Capacities As Per Approved Drawing With 1St Class Brick Work In Cement Mortar 1:4 Including Two 560 Mm Dia. R.C.C. Manhole Coverheavy Typeof Approved Make Supplied, Fitted And Fixed In The 100Mm Thick R.C.C 1:1.5:3 Top Slab With Necessary Fittings, 20Mm Thick Cement Plaster 4 : 1 With Neat Cement Finish To The Internal Surfaces And 15 Mm Thick Cement Plaster 4 : 1 To Outside Wall Upto 200 Mm Below G.L Floor Finished With 25 Mm Thick Grey Artificial Stone Over 100 Mm Thick R.C.C1:1.5:3 Bottom Slab Including Supplying, Fitting And Fixing All Necessry Specials, Fittings, S.W. Tees, C.I. Foot Rest Etc. Including Excavation Earth In All Sorts Of Soil, Shoring, Bailing Out And Pumping Out Water As Necessary, Ramming, Dressing The Bed And Fefilling The Sides Of The Tanks With Earth, Removing Spoils, Filling Up The Chamber With Clear Water, Removing Foreign Materials From The Chamber And Including Constructing Attached Inspection Pit As Per Approved Drawing And Connecting All Necessary Pipes, Joints Etc. With Internal Plaster Work And Artificial Stone Flooring Is To Be Done With Admixture Of Water Proofing Compound @ 0.5% By Weight Of Cement With All Costs Of Labour And Materials. Note:- I Finished Level Of Septic Tank Should Be 400 Mm. From Ground Level. Ii Height Of 50 Mm. Ventilation Pipe &Mosquito Proof Mesh, Should Be Follwed As Per Is:2470, Part- I.Payment Will Be Made Separetly On The Basis Of Actual Height Based On Relevant I.S.Code For 100 Users With Pakur Variety. Other Than Sail/Tata/Rinl Construction Of Circular Soak Well 2.5 Metre Deep In All Types Of Sandy Soils With Dry Brick Work Upto 1.6 Metre From The Bottom Having 150 Mm Intermediate Cement Brick Work 1:4 Band All Round And Cement Brick Work 1:4 Upto 0.90 Metre From Top With 20Mm Thick Cement Plastering 1:4 To Inside Face Upto The Depth Of Cement Brick Work, 15Mm Thick Cement Plaster 1:4 On Outer Face From Top Of The Well Upto G.L. And 6 Mm Thick Cement Plaster 1:4 On Top Of The R.C.C. Cover Slab Including Filling Bottom 1.00 Metre Of Inside Of The Well With Brick Metal 50 Mm To 63 Mm Size Including R.C.C. Cover Slab Of 100 Mm Thick With Cement Conc 1:1.5:3 With Stone Chips With Necessary Reinforcement And Shuttering Including One 560 Mm Dia. R.C.C. Manhole Cover Heavy Typeof Approved Make Supplied, Fitted And Fixed In The Cover Slab With Necessary Fittings, Making Nacessary Arrangements For Pipe Connections, Excavation Of Well Including Shoring, Dewatering And Removing The Exess Earth From The Premises As Per Direction Complete In All Respect With All Costs Of Labour And Materials. Removing Sludge From Septic Tank, Soak Well Etc. By Methor Labour Including Disposal Of The Same Outside The Compound As Directed. Upto 100 Users:- Beyond A Lead Of 150 Metre And Outside The Municipal Limit Cleaning Soak Pit By Removing The Top Slab And Replacing Inner Filling With Jhama Bats And Repairing The Pit As Necessary Including Fitting The Slab. At Male Vagrant Home, Petrapole

TRN :19856149
State Government / Construction
North 24 Paragana - West Bengal

INDIAN Hire Our Expertise :

  • Tender Bidding
  • Tender Consultancy
  • Tender Advisory
  • Identify Eligibility Criteria
  • Identify Penelty Clauses
  • Highlight Important Dates
  • Technical Bid Preparation
  • Offline Bid Preparation
  • Online Bid Preparation
  • Offline Bid Submission
  • Online Bid Submission
  • Track Corrigendum / Addendums
  • Attend Pre Bid Meetings
  • Consistent Liaison & Coordination
  • EMD Follow Ups

INDIAN - bidding
image

We heartily welcome your move to excel your business to new heights.

Set Tender Alert

Activate daily alerts to know the tenders available of your work.

Get alerts

Bidding Support

Ask experts, how to fill bid forms, submit bids, participate in bids.

Get in touch

GeM Registration

Looking for GeM Registration? Get in touch with us and we will do the needful.

Registration

Digital Certificate

Get DSC for e-Tendering, e-Auction, e-bidding, Corporations / Associations / Others Tenders

Purchase now

Tender Awards

Want to know who's got the tender and are looking for subcontracting?

Connect now

Projects

Government and other private players, Real-time Updates of Project Information

Get info

International Tenders

We almost cover all the regions and countries across the world. Click to take your business to new heights.

Start now

Web Design

Get the Best Offers & Deals, expertise in developing static websites, dynamic websites and e-commerce.

Design now

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us

W B


Copyright ©2018 - Thetenders.com. Read Policies