Bidding Support

036125

Bidding Support

Warm Greetings from www.thetenders.com, the fastest growing tender information portal in India.

Supply Of Machine Equipment- Gauge Length-0.3Mm To 60Mm, Foil Material- Cu-Ni Alloy, Base Material Polyester Scales-0 To 10 Marking, Accuracy-+-5%Of Full Scale Maxium Pressure 6.7Bar Maximum Temperature 1210 No. Of Blade 10, Measuring Range .05Mm To .8Mm Flatness-0.1, Thickness-12Mm, Base Dia 45Mm Dimensions-20X48x40, Range-0 To 40 M Laser Emitter, Accuracy - +-2.5Cm At A Distance Greater Than 1M, Laser Wave Length/Peak Power-905Nm/1.3 Watts Model 0F Cut Sectioned Transfer Case Assembly.A Crank Lever Is Provided To Demonstrate The Mechanism.Complete Unit Is Mounted On A Stutrdy Iron Frame. Pressure-1Mpa, Material-Grey Cast Iron Arrangement Of Gear In An Epicyclic Train Permitting The Rotation Of Two Shafts At Different Speeds, Used On The Rear Axle Of Automotive Vehicles To Allow Different Rates Of Wheel Rotation On Curve. 3.5 Turning Revolution From Lock To Lock, Standard Galvanised Steering Cable Is Also Available, Standard ¾ Tapered Shaft, Quick And Easy Installation Break Drum Diameter 100 To 600 Mm, Breaking Torque 6Kg.M To 580 Kg.M, Self Adjusting Lining Wear Mechanism, Real” Automotive Components With Fully Functional Disc/Drum Hydraulic Braking System Including: All Hydraulic Components Brake Pedal And Parking Brake Pedal Power Brake Booster Parking Brake Components Hydraulic Pressure Gauges At Each Wheel 4Fully Functional Parking Brake System Fits Through A Standard 30” Door Opening Heavy Duty Metal Stand With Casters For Easy Transport Two Fixed And Two Swivel W/Locksall Routine Brake Service Procedures Can Be Performed On This Trainer Including: Master Cylinder Service Brake Pad/Shoe Replacement Disc/Drum Service Wheel Bearing Service Caliper/Wheel Cylinder Service Brake Hose/Line Service Parking Brake Service With: Catlog, Work Manual And Necessary Accessories Sizelxwxh 3500X4000x2000mm, Electric Supply- 230+/- 10V Ac, Frequency-50Hz, Phase- Single, No. Of Cylinder-4, Fuel Type- Diesel, Fuel Capacity- 10Litre, Lubricating Oil-3.5 Litre, Current- 5Amp3-Pin Socket, Exhaust Pipe- 32Nb, Size Pipe- 1.25Inch, Water Supply Rate- 4000Ph At 10M Head Continous, Clean & Soft Water, Bhp- 21-35 Hp, Note- Actual Working Model For Lab Purpose With Catalog, Work Manual And Other Necessary Accessories Sizelxwxh 3500X4000x2000mm, Electric Supply- 230+/- 10V Ac, Frequency-50Hz, Phase- Single, No. Of Cylinder-4, Fuel Type- Petrol, Fuel Capacity- 10Litre, Lubricating Oil-3.5 Litre, Current- 5Amp3-Pin Socket, Exhaust Pipe- 32Nb, Size Pipe- 1.25Inch, Water Supply Rate- 4000Ph At 10M Head Continous, Clean & Soft Water, Bhp- 21-35 Hp, Note- Actual Working Model For Lab Purpose With Catalog, Work Manual And Other Necessary Accessories Sizelxwxh 3300X2900x1700mm, Electric Supply- 230+/- 10V Ac, Frequency-50Hz, Phase- Single, Diesel Tank Capacity- 10Litre, Lubricating Oil-5 Litre, Bhp- 18-20 Hp, Rpm- 4000-6000, Bore- 8.8Cm, Stroke- 12Cm, Torque-18-20Nm Note- Actual Working Model For Lab Purpose With Catalog, Work Manual And Other Necessary Accessories Sizelxwxh 3300X2900x1700mm, Electric Supply- 230+/- 10V Ac, Frequency-50Hz, Phase- Single, Petrol Tank Capacity- 5-10Litre, Lubricating Oil-1 Litre, Bhp- 16-20 Hp, Rpm- 3000-5000, Bore- 8.8Cm, Stroke- 12Cm, Note- Actual Working Model For Lab Purpose With Catalog, Work Manual And Other Necessary Accessories Motor Power-2Kw, Pressure 10 Mpa, Voltage 415V, Speed 1500Rpm, With Control Panel, Phase 3, Flow Measurement :Using Orifice &Air Tank, Pressure Measurement :Bordon Pressure Gauge With Catalog, Work Manual And Other Necessary Accessories 1 Benchtop Experiment On The Uneven Reciprocating Motion Of Whitworths Quick Return 2 Crank Radius 46Mm, Slider Radius 55Mm, Connecting Rod Length 145Mm 3 Slider Crank And Connecting Rod Mounted On Ball Bearings 4 Lxwxh 360X280x60mm With Catalog, Work Manual And Other Necessary Accessories Material Stainless Steel, Motor Variable Speed ½ Hp, 0 To 1500 Rpm Lab Model With Catalog, Work Manual And Other Necessary Accessories D.C Motor 0.5Hp, 0 To 1500Rpm, 220 V, Belt And Pulley Spindle Speed Lab Model With Catalog, Work Manual And Other Necessary Accessories Disc Brakes Weighing Under 50 Kg Apply A Clamping Force Of 300Kn And Produce A Retardation Of 900Kw Lab Model With Catalog, Work Manual And Other Necessary Accessories Standard Company Machine/Equipment Civil Engg. Vicat Appratus Mild Steel Base Plate 5 Inches X 5 Inches. Fulcrum Mould, Brass, 70Mm I.D. Base Dia X 60 Mm I.D. Top Dia, 40Mm Height Lechatelier Apparatus Mould- Split Cylinder 30 Mm Internal Diameter, 30Mm High With Two Indicator Stems Which Measure 165 Mm From The Points Of The Centre Line Of The Cylinder And O Ring. 3-Moulds Single Unit Individually Checked, Supplied Complete With Certificate Of Conformity And Identified By A Serial Number Weight Approx. 30G. Venturimeter Material Clear Acrylic Compatible To 1” Dia, Water Circulation 0.5 Hp Pump, Measuring Tank Capacity 40Ltrs, Sump Tank Capacity 85 Ltrs, Stop Watch Electronic, Control Panel On/Off Switch, Mains Indicator, Differential Manometer, Pipe Arrangement Etc. Laser Distance Meter: Range 50 Mtrs, Display Touch Screen, Accuracy +- 1Mm, Dia Of The Laser Dot In Mm 6.30, 60 Mm, Tilt Sensor Measuring Range 3600 Photograph File Format Jpg, Complete Set. Levelling Staff 15 M 30 M Tripod Folding Stand Size 100Mm With Case Machine/Equipment Mining Engg. Hypabasal Igneous Rock Volconic Igneous Rock Plutonic Igneous Rock Sedimentory Rock Metamorphic Rock Mineral Hand Specimen Stand With 4/5 Position Centrable Nose Piece Microscope Frame For Polarizing Microscopy With Circular Rotatation Graduated Stage, Including Centring Knob 1 Pair And Stage Clip U-Scb2 Pair With Condenser & Polarizer. Trinocular Tube, Fn20, Fixed Light Pass, Bi/Photo : 50/50, Wide Frame Eyepiece 10X, Fn20. Light Balancing Day Light Filter, 30W Led/Halogen Bulb, Cord, Dust Cover. Attachable Mechanical Stage, Graduated For Circular Stage. Polarizing Objectives :-Achromat Polarising Objective 10X/0.25, Wd 6Mm Achromat Polarising Objective 4X/0.1, Wd 18.5 Mm Level Of About 20 Mm Below The Drum Axis, Rotation Must Be Driven By A Motor Capable Of Rotating The Drums At A Constant Speed Of 20 Rpm. Hardness Box Made Of Sharp Edge Of Minerals Having Hardness 1 To 10 In Form Of Pencil. Measuring Accuracy Range + 1.5 Mm To Capable To Measure Distance Upto 100 Mm, Units M, Ft, In Tilt Measuring Range + 45 Or 360°.With Software And Stand Tripod And All Accessories With Area. Volume Measurement, Pythagoras Functions. Bonded And Molded Shock Reduction Grip Which Offers The Utmost In Both Comfort And Durability, While Reducing Vibrations Caused By Impact The Head And Handle Are Forged In One Piece And Have A Fully Polished Head Weight – 22 Oz / 616 G Overall Lenght 13” / 330 Mm Bonded And Molded Shock Reduction Grip Which Offers The Utmost In Both Comfort And Durability, While Reducing Vibrations Caused By Impact The Head And Handle Are Forged In One Piece And Have A Fully Polished Head Weight – 22 Oz / 616 G Overall Lenght 13” / 330 Mm Rock/Minerals/Slide 2000 Kn Capacity. Ram Travel :- 50Mm Daylight Clearance :- 325Mm Minimum Horizontal Clearance :- 300Mm Platen Size : Minimum Dia-220Mm 220V/50Hz Ac Supply Proving Ring 2000 Kn Capacity With Loading Platens Conforming Is-4169 Sensitivity :- 5N Per Division, Certified By Npl/Nabl Or Other Approving Body. Core Cutting – Core Drilling Machine Electrically Operated Suitable To Cut/Drill Cores Of Rocks, Stones, Tiles Concrete Or The Similar Material. Core Cutting Machines At Least 100 Mm Dia With 2 Core Bit 4 Inch, 6 Inch The Base Frame Is Also Fitted With Wheels For Ease Or Transportation. Drill Speeds : 900 Rpm For Soft Samples And 350 Rpm Hard Samples. Suitable For 220 Volts Ac, Single Phase Accessories : Thin Wall Diamond Bit – 1 Core Barrel – 1 Two Sets Of Drums Of The Length Of At Least 100 Mm And The Diameter Of At Least 140 Mm. Drums Rotate In Water That Achromat Polarising Objective 20X/0.4 Wd 3Mm Achromat Polarising Objective 40X/0.65 Wd 0.45Mm Spring 7. Microscopic Digital Camera – High Resolution Digital Camera With ½” Cmos Chip Usb 2.0 Pc Connection, Minimum Image Resolution : 3.3 Mega Pixels, 2048 X 1536 Pixels, 16Mm Lens Macro Viewing Tube, Calibration Slide And Microscope Eyepiece Adapters, Roi Region Of Interest From 1X1 Pixels Up To Full Resolution, Continuously Variable In Single-Pixel Increments Frame Speed Of 30Fps Full Field Of View Higher Fps With Roi Functions And Necessary C Mount Adapter. 8. Software Optional : Image Analysis Software For Measurements. Efi, Morphometry Analysis, Avi Recording, Annotations, Advanced Acquisition Control Snapshot, Time Lapse And Should Be Capable Of Driving The Camera For Capture Of Images In Real Time, Magnifier Zoom Function, Distant Image Sharing, Data Export, Interactive File Format, Please Mentioned The Price Of Software In Separate Sheet Optional : Related Optional Accessories Can Also Be Quoted. Steel Fabricated Compatible For Utm Fabricated As Per International Society Of Rock Mechanics Standard. Load Frame 60 Kn Capacity With A Hydraulic Loading Ram Actuated By A Hand Pump. The Frame May Be Adjustable To Allow For Testing Samples Up To 102 Mm Dia. A Ruler Assembled On The Frame Allows For Direct Measurement Of The Distance Between The Conical Platens Before And After The Test. The Compression Load Is Measured By A Pressure Transducer With An Advanced Digital Display Unit Assuring The Best Accuracy And Resistance To Be The Failure Shocks. The Machine, Fitted With The Set Of Lower And Upper Platen Of At Least 52 Mm Dia With Spherical Seat For Compression Tests, Can Also Be Used For Compression Tests On Small Cores Or Cylindrical Specimens. The Apparatus Is Contained In An Easily Transportable Case. Anchorage Testing Machine Strain Gauge Voltmeter- Ammeter- Dc Shount Generator Dc Series Generator. Dc Shunt Motor- Induction Motor Rotary Compressor Gas Mask Filter Self Rescuer Reviving Apparatus Machine/Equipment Wokshop And Electrical Lab Standard Wire Guage Hallowing Hammwer Scriber Divider Soldring Iron Capper For Sheet Metal 25 Watt Chisel Tool Grinder Machine Hand Blower With Stand For Black Smithy Round Nose Tong Flate Nose Tong Half Round Tong Hammer Center Punch Punch Different Size Chisel Flate Nose Electrode Oven Power Hacksaw Cutting Machine Dc12v-24V Dc Power Supply For Application Ciricuit Teeth Wheel Fitted With Motor Shaft Min Dc Motor- 12 Dc Speed Contest Arrangement- Mining Dc Pwm Drevi Magnetie Proxcinily Switch/Sensor Excitator Signal Ic Based Signal Conditiour Voltage Input 440 Vac 50 Hz Power Rating 0.7Kw Rpm- 1440/2880 Rpm Voltage Input 440 V Ac 50 Hz Power Rating- 2.2 Kw Rpm- 1440/2880 Rpm 1 Hp Power Rating 0.7Kw With Loading Arrangement 3 Hp Power Rating 2.2 Kw With Loading Arrangement High Performance Kit In Built Excitation Frequency Transduern Lvdt, Range- 10Mm On Board Digital Meter, Amplifier Scationed Dectifier Section Foil Type And Semiconductor Type For Single, Dual And Multiaxial Strain Measurement Photo Transducer Kit Transducer- 4 Nosphoto Conduction Cell, Photo Transistor, Photo Voltaie Cell & Pin Photo Diode Input Circuits- Rotary & Slide Output Circuits- Relay & Led Efficiency – 80% Wide Charging Inverter And Ups Operation Prolecter For Short Circuit Range 140-28 V, 1-15 Amp 24V Ac 16 A Single Phase – Current Rating 16 A 5 Kva. 415V Ac 1000M?. 6000Rpm. 1999M?. Upto 10Hp. 220V. 3 Hp. Ac Squirrel Cage Motor With Star Delta Starter And Triple Pole Iron Clad Switch Fuse. 2 To 3Hp, 3-Phase, . Copper Winding, 400Volts, 50Cycles Single Phase Capacitor Motor With Starter Switch 1 Hp Copper Winding, 230 Volts 50 Cycles. We Are Providing Our Clients An Excellent Quality Gamut Of Transformers Coil Winding Machines. These Winding Machines Are Tested On Several Quality Provisions By Our Quality Controllers For Supplying A Flawless Range. Offered Winding Machines Are Provided In Various Stipulations As Per The Needs Of The Customers. Features: Low Power Consumption Reliable Functioning High Performance Used In Following Industries: Mobile Charger Coils Cfl Adaptor Coils Inductor Coils Charger Coils Miniature Coils Control Transformer Coils High Frequency Coils Specifications: Winding Speed Max Winding Width : 99.9 Mm Wire Guage : 45 Swg To 20 Swg Bobbin Swing : 75 Max, : 8000 Rpm With Accessories. Machine & Equipment Computer Science & Engineering Computer Lab Slide Calliper With Wooden Cube And Hollow Cylinder Screw Gauge Spherometer With Watch Glass Apparatus With Lamp To Hold The Apparatus, Constant Weight Variable Weight. Slatted Weight Of 1/2 Kg And 1Kg Capillary Tube Falling Sphere Viscometer, Steel Ball Bearing Steam Bath And Thermometer 0-3600C Board Pin, Glass Lab Resonance Column Apparatus With Rubber Pad, Tunning Fork Of Different Frequencies Two Thermometer 0-1000C Moning Coil Galvanometer Lamp, Scale Arrangement Resistance Box 0-10000 Ohm Steam Generator, Pot Containing Cotton Wool Beaker, Stop Watch, Stand Of Bar Pendulum And Stop Clock And Meter Scale Spectrometer Prism And Sodium Light Resistance Of Different Range Meter Bridge, Key Single Way And Double Way Cell Galvanometer, Semiconductor Device, Ammeter Milli, Voltmeter, Rhuestat, Connecting Wires. Photo Electric Cell, Pensky Marten’S Flash And Fire Point Electric Oven, Porcelein Dish Digital Conductivity Meter Beaker 100-400 Ml, Conical Flask 250-400Ml, Burrete 250Ml, Pipette 100Ml, Burrete Stand Readwood Viscometer, Thermometer, Stop Watch, Laboratory Spatula, Volumetric Flash, Wash Botal, Measuring Cylinder, Dropper, Digital Chemical Balance, Glass Rod, Watch Glass, Ostwald Viscometer Table 3”X3”X2” With Granite Top With Basin For Lab Work, Water Connection,

TRN :19554456
State Government / Education And Research Institutes
Dhanbad - Jharkhand

INDIAN Hire Our Expertise :

  • Tender Bidding
  • Tender Consultancy
  • Tender Advisory
  • Identify Eligibility Criteria
  • Identify Penelty Clauses
  • Highlight Important Dates
  • Technical Bid Preparation
  • Offline Bid Preparation
  • Online Bid Preparation
  • Offline Bid Submission
  • Online Bid Submission
  • Track Corrigendum / Addendums
  • Attend Pre Bid Meetings
  • Consistent Liaison & Coordination
  • EMD Follow Ups

INDIAN - bidding
image

We heartily welcome your move to excel your business to new heights.

Set Tender Alert

Activate daily alerts to know the tenders available of your work.

Get alerts

Bidding Support

Ask experts, how to fill bid forms, submit bids, participate in bids.

Get in touch

GeM Registration

Looking for GeM Registration? Get in touch with us and we will do the needful.

Registration

Digital Certificate

Get DSC for e-Tendering, e-Auction, e-bidding, Corporations / Associations / Others Tenders

Purchase now

Tender Awards

Want to know who's got the tender and are looking for subcontracting?

Connect now

Projects

Government and other private players, Real-time Updates of Project Information

Get info

International Tenders

We almost cover all the regions and countries across the world. Click to take your business to new heights.

Start now

Web Design

Get the Best Offers & Deals, expertise in developing static websites, dynamic websites and e-commerce.

Design now

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us

W B


Copyright ©2018 - Thetenders.com. Read Policies