Bidding Support

955977

Bidding Support

Warm Greetings from www.thetenders.com, the fastest growing tender information portal in India.

Providing And Fixing Of Play Equipment, Bench, Open Gym At Anah Gate Shastri Park W.No. 18 Providing And Installation Cast Iron Bench: Total Area Should Be 1.5Mtrx0.50Mtr. For Proper Installation And Safty Purpose Of Bench And Made Of Two No. Side Panel Must Be Made By Heavy Duty Cast Iron With Decorative Desence Panel Properly Connected With 50Mmx25mm Rectangle Squire Pipe With Proper Fitting. There Is Total 11 Nos. Rectangle Squire Pipe Ribs For Proper Sitting And Back Rest Arrangement For Peoples. There Is On Any Sharp Corner Not Seen On The Joints And Sitting Or Back Rest Of The Bench. All Sharp Corner Is Properly Grinded By Grinder And Fill By Filler. The Pure Polyester Powder Coating Oven Backed Done On The Pipes Extend The Life Of Equipments. And Install By C.C. Base System. Work To Be Completed As Per Direction And Satisfaction Of Engineer Incharge Providing And Fixing Of Frp Wave Slide- Safe Play Area-5.2 Mtr. X 0.6 Mrt. Height – 1.8Mtr. Providing & Fixing Of Wave Slide Its Total Required Area 4.2 Mtrx0.6Mtr. Platform Height 1.8Mtr From Ground Level Connected With Leg Support 60Mm Idgi Pipe & Ladder Should Be Made By Steel Frame Rectangular Square Pipe 50Mmx25mm For Safty Purpose. Ralling Should Be Made By 25Mm Idgi Pipe. Total Slide Length 3.8Mtr. With 5 Mm Frp Thick Overall Both Side Finish. All The Sharp Edges And Corner Properly Grinded To Give Smooth Finishing So That Children Are Not Hurt With Playing On It. The Pure Polyester Powder Coating Oven Baked Done On The Pipes Extend The Life Of Equipments. Slide Should Be Made In A Single Mould Piece There Is No Any Joint In The Slide. Frp Components Should Be Paint By 3 Layers Of Pu Paint. And Install By C.C. Base System Complete Work To Be Completed As Per Direction And Satisfaction Of Engineer Incharge Providing And Fixing Of 2 Seater Arch Swing:- Safe Play Area -4 Mtr. X2.5 Mtr. Height - 2.4Mtr Total Required Area Of Swing Is 3Mtr. X 1.5Mtr. And Height Shall Be 2.4 Mtr. From Ground Level Top Bar Of Swing Is Made By 80Mm Idgi Pipe 12 Gauge. And 4 Nos. Of Leg Support Pipe Should Be 80 Idgi Pipe 12 Guage. Top Bar Attach With 2 Nos. Of Alloy Steel Coasting Bearing With Gi Chain. Seating Arrangement Of Swing Is Made Up Of 10Mm Thick. Anti Skid Chequred Reinforced Rubber Belt. Bearing Should Be Heavy Duty Only. All The Sharp Edges And Corner Properly Grinded To Give Smooth Finishing So That Children Are Not Hurt With Playing On It. The Pure Polyester Powder Coating Oven Baked Done On The Pipes Extend The Life Of Equipment. And Install By C.C. Base System As Per Order By Engineer In Charges Age Capacity 3-16 Year Work To Be Completed As Per Direction And Satisfaction Of Engineer Incharge Providing & Fixing Of Aerial Stroller Having Dimension : • Product Area : 1M X 0.5M 5Ft X 2.6Ft • Safe Play Area : 2M X 1.5M 6.6Ft X 5Ft • Ideal For : 13 Years & Above Function: • Strengthens Leg Muscles. • Lower Body Workout Technical Specification: •Post Dia: The Aerial Stroller Having Ergonomic Design With 80Nb Gi Main Vertical Support Pipe Of Aerial Stroller Is Fixed Over 10Mm Thick Base Plate. Clamping Plates Are Attached To Main Frame To Hold The Rest Of Assemblies. •Footrest And Handles: Footrest Bend And Handle Having 40Nb And 25Nb Dia Galvanized Pipe Respectively. The Materials Used For Foorest Are Aluminum/Nylon/Lldpe/Hdpe•Specially Designed Mounting Flange Assembly Having Circular Flange Of 130Mm Dia With 16Mm Thickness Is Provided For Footrest Assembly. •Pipes: All Metal Pipes Are Hot Dipped Galvanized Pipes Conforming To Is 1239 Part 1 With Gi Thickness Of 60Micron. •Pipe Materials Or Class: Medium Duty B Class And Heavy Duty C Class Series Of Pipes Only.Wall Thickness Of Pipe Varies According To Class/Series Of Pipe Used. •Powder Coating:It Shall Be Done With Pure Polyester Raw Material.Dry Film Thickness Maintained Within The Range Of 50-70 Microns.It Is Tested For Adhesion Test According To Astm-D-3359 With The Help Of Cross Hatch Cutter Instruments. •Bearing Housing Shall Be Made From Solid Bar Of Ms Material. •Bearing: Bearings Are Oil Sealed, Self-Lubricated Made Of Skf/ Ntn/ Nachi Make Shall Be Provided For Smooth & Trouble-Free Movement. •Pins And Circlips: 35Mm And 62Mm Diameter Pins Shall Be Made From En8 Material & Circlips Made From Standard Material. •Nut And Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts Are Used With Pvc Bolt Caps. All Open Ends Of Pipe Been Closed By Gi / Pvc Caps For User Safety Against Entrapment, The Casting Of Above Structure Must Be As Per Direction Of Site Incharge. Providing & Fixing Of Chest Press & Shoulder Exerciser Combination/ Seated And Chest Combo Having Dimension : • Product Area : 2.3M X 1.2M 7.5Ft X 4Ft • Safe Play Area : 3.3M X 2.2M 10.8Ft X 7.2Ft •Ideal For: 13 Years And Above Function: •Strengthens Upper Back, Biceps & Core. Technical Specification: •Post Dia: 100Nb Gi Main Vertical Support Pipe Of Chest Press & Shoulder Exerciser Combination Is Fixed Over 10Mm Thick Base Plate. 10Mm Thick Clamping Plates Are Attached To Main Frame To Hold The Rest Of Assemblies. •Seat Frame: Seat Frame Made From 40Nb Bend Gi Pipes And Material Used For Seat Are Hdpe High-Density Polyethylene Uv Stabilised With Uv Property/Lldpe. This Seat Frame Is Mounted On Vertical Support Pipe Through 40Nb Gi Pipe Links With The Help Of Specially Designed Bearing Housings. Connecting Link Plates Are 8Mm Thick. •Footrest/Handle: 25Nb Gi Pipe Is Attached To Seat Frame To Form A Foot Rest. Handle Made Up Of 25Nb Pipe With Pvc End Cap. •Bearing Housing Shall Be Made From Solid Bar Of M.S. Material. •Bearing: Bearings Are Oil Sealed, Self-Lubricated Made Of Skf/ Ntn/ Nachi Make Shall Be Provided For Smooth & Trouble-Free Movement. • Foundation Stand: The Foundation Stand Is Made From 80Nb Gi Pipe With C Class Materials Having 250X10 Thk Plate. •Pipes: All Metal Pipes Are Hot Dipped Galvanized Pipes Conforming To Is 1239 Part 1 With Gi Thickness Of 60Micron. •Pipe Materials Or Class: Medium Duty B Class And Heavy Duty C Class Series Of Pipes Only.Wall Thickness Of Pipe Varies According To Class/Series Of Pipe Used. •Powder Coating:It Shall Be Done With Pure Polyester Raw Material.Dry Film Thickness Maintained Within The Range Of 50-70 Microns.It Is Tested For Adhesion Test According To Astm-D-3359 With The Help Of Cross Hatch Cutter Instruments. •Nut And Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts Are Used With Pvc Bolt Caps. All Open Ends Of Pipe Been Closed By Gi / Pvc Caps For User Safety Against Entrapment. The Casting Of Above Structure Must Be As Per Direction Of Site Incharge. Providing & Fixing Of Shoulder Twirl Double Dimension: • Product Area : 1.2M X 0.9M 4Ft X 3Ft • Safe Play Area : 2.2M X 1.9M 7.2Ft X 6.2Ft • Ideal For : 13 Years & Above Function: • Strengthens Shoulders & Arms. • Improves Shoulder Agility. Technical Specification: •Post Dia: 80Nb Gi Main Vertical Support Pipe Of Shoulder Builder Is Fixed Over 10Mm Thick Base Plate. 10Mm Thick Clamping Plates Are Attached To Main Frame To Hold The Rest Assemblies •Wheel Structure: 25Nb Galvanized Pipe Bend To Form Ring Of Wheel And Spokes Are Made Up Of 15Nb G.I. Pipes That Connect To Each Other To Form A Wheel Of Shoulder Twirl. Nylon Knobs Are Provided On The Wheels For Gripping Purpose. This Wheel Is Fixed To Main Support With The Help Of 40Nb Connector Pipe With Specially Designed Bearing Housing. •Pipes: All Metal Pipes Are Hot Dipped Galvanized Pipes Conforming To Is 1239 Part 1 With Gi Thickness Of 60Micron. •Pipe Materials Or Class: Medium Duty B Class And Heavy Duty C Class Series Of Pipes Only.Wall Thickness Of Pipe Varies According To Class/Series Of Pipe Used. •Powder Coating: It Shall Be Done With Pure Polyester Raw Material.Dry Film Thickness Maintained Within The Range Of 50-70 Microns.It Is Tested For Adhesion Test According To Astm-D-3359 With The Help Of Cross Hatch Cutter Instruments. •Bearing Housing Shall Be Made From Solid Bar Of Ms Material. •Bearing: Bearings Are Oil Sealed, Self-Lubricated Made Of Skf/ Ntn/ Nachi Make Shall Be Provided For Smooth & Trouble-Free Movement. •Pins And Circlips: 25Mm Diameter Pins Shall Be Made From En8 Material & Circlips Made From Standard Material. •Nut And Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts Are Used With Pvc Bolt Caps All Open Ends Of Pipe Been Closed By Gi / Pvc Caps For User Safety Against Entrapment. The Casting Of Above Structure Must Be As Per Direction Of Site Incharge. Providing & Fixing Of Hip Twister Double Rectangular Having Dimension : • Product Area : 1.9M X 0.6M 6.2Ft X 2Ft • Safe Play Area : 2.9M X 1.6M 9.5Ft X 5.2Ft • Ideal For : 13 Years & Above Function: •Stretches Waist & Upper Body. Technical Specification: • Main Support: The Main Support Of Hip Twister Double Circular Consist Of 80Nb G.I Pipe. •Handle/Wheel: 25Nb Galvanized Pipe Bend To Form Rectangular Shape Of Handle Product. • Footrest: 40Nb Gi Pipe Is Attached With Main Frame To Form A Foot Rest Having 130X50x5 Thk Plate •Standing Or Rotating Disc: Standing Disc Of 300Mm Dia Round Size Shall Be Made Of Hdpe/Metal. 15Mm Thick Hdpe Sheet And Plate 10Mm Thick For Base Support. •Bearing: Bearings Are Oil Sealed, Self-Lubricated Made Of Skf/ Ntn/ Nachi Make Shall Be Provided For Smooth & Trouble-Free Movement. • Foundation Stand: The Foundation Stand Is Made From 80Nb Gi Pipe Having 200X10 Thk Plate. •Pipes: All Metal Pipes Are Hot Dipped Galvanized Pipes Conforming To Is 1239 Part 1 With Gi Thickness Of 60Micron. •Pipe Materials Or Class: Medium Duty B Class And Heavy Duty C Class Series Of Pipes Only. Wall Thickness Of Pipe Varies According To Class/Series Of Pipe Used. •Powder Coating: It Shall Be Done With Pure Polyester Raw Material. Dry Film Thickness Maintained Within The Range Of 50-70 Microns. It Is Tested For Adhesion Test According To Astm-D-3359 With The Help Of Cross Hatch Cutter Instruments. •Nut And Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts Are Used With Pvc Bolt Caps. All Open Ends Of Pipe Been Closed By Gi / Pvc Caps For User Safety Against Entrapment. The Casting Of Above Structure Must Be As Per Direction Of Site Incharge. Providing & Fixing Of Leg Press Double Standard Having Dimension : • Product Area : 2.2M X 0.6M 7.2Ft X 2Ft• Safe Play Area : 3.2M X 1.6M 10.5Ft X 5.2Ft •Ideal For: 13 Years And Above Function: •Workout Of Thigh And Calfs Strengthening Legs Technical Specification: •Post Dia: 80Nb Gi Main Vertical Support Pipe Of Leg Press Double Is Fixed Over 10Mm Thick Base Plate. 10Mm Thick Clamping Plates Are Attached To Main Frame To Hold The Rest Of Assemblies. •Seat Frame: Seat Frame Made From 40Nb Bend Gi Pipes And Material Used For Seat Are Hdpe High-Density Polyethylene Uv Stabilised With Uv Property/Lldpe. This Seat Frame Is Mounted On Vertical Support Pipe Through 40Nb Gi Pipe Links With The Help Of Specially Designed Bearing Housings. Connecting Link Plates Are 8Mm Thick. •Footrest: Footrest Support To Be Of 25Nb G.I Pipe. The Materials Used For Foorest Are Aluminum/Nylon/Lldpe/Hdpe. •Bearing Housing Shall Be Made From Solid Bar Of M.S. Material. •Bearing: Bearings Are Oil Sealed, Self-Lubricated Made Of Skf/ Ntn/ Nachi Make Shall Be Provided For Smooth & Trouble-Free Movement. • Foundation Stand: The Foundation Stand Is Made From 80Nb Gi Pipe With C Class Materials Having 200X10 Thk Plate. •Pipes: All Metal Pipes Are Hot Dipped Galvanized Pipes Conforming To Is 1239 Part 1 With Gi Thickness Of 60Micron. •Pipe Materials Or Class: Medium Duty B Class And Heavy Duty C Class Series Of Pipes Only. Wall Thickness Of Pipe Varies According To Class/Series Of Pipe Used. •Powder Coating: It Shall Be Done With Pure Polyester Raw Material. Dry Film Thickness Maintained Within The Range Of 50-70 Microns. It Is Tested For Adhesion Test According To Astm-D-3359 With The Help Of Cross Hatch Cutter Instruments. •Nut And Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts Are Used With Pvc Bolt Caps. All Open Ends Of Pipe Been Closed By Gi / Pvc Caps For User Safety Against Entrapment. The Casting Of Above Structure Must Be As Per Direction Of Site Incharge. Providing & Fixing Of Walker Having Dimension: • Product Area : 2.5M X 0.8M 8.2Ft X 2.6Ft • Safe Play Area : 3.5M X 1.8M 11.5Ft X 5.9Ft • Ideal For : 13 Years & Above Function: • For Lower Body Workout. Technical Specification: •Two Side Frames Of Walker Are Made From 80Nb & 40Nb Galvanized Pipes. •The Handle Pipe: Consists Of 25Nb Galvanized Pipes With Rubber Grip On Top End. This Handle Pipes Are Hinged Over 80Nb Frame. The Handle Pipe Is Further Extended To The Rectangular Tube Of 50 X 25 Mm On Both Sides With 40Nb Galvanized Pipe Links. •Footrest : The Materials Used For Foorest Are Aluminum/Lldpe/Hdpe/Nylon. •Bearing Housing Shall Be Made From Ms Material. •Bearing: Bearings Are Oil Sealed, Self-Lubricated Made Of Skf/ Ntn/ Nachi Make Shall Be Provided For Smooth & Trouble-Free Movement. •Pipes: All Metal Pipes Are Hot Dipped Galvanized Pipes Conforming To Is 1239 Part 1 With Gi Thickness Of 60Micron. •Pipe Materials Or Class: Medium Duty B Class And Heavy Duty C Class Series Of Pipes Only.Wall Thickness Of Pipe Varies According To Class/Series Of Pipe Used. •Powder Coating:It Shall Be Done With Pure Polyester Raw Material.Dry Film Thickness Maintained Within The Range Of 50-70 Microns.It Is Tested For Adhesion Test According To Astm-D-3359 With The Help Of Cross Hatch Cutter Instruments. •Nut And Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts Are Used With Pvc Bolt Caps. All Open Ends Of Pipe Been Closed By Gi / Pvc Caps For User Safety Against Entrapment. The Casting Of Above Structure Must Be As Per Direction Of Site Incharge. Providing & Fixing Of Forearm Twirl Having Dimension : • Product Area : 1.5M X 0.8M 5Ft X 2.6Ft • Safe Play Area : 2.5M X 1.8M 8.2Ft X 5.9Ft • Ideal For : 13 Years & Above Function: • Strengthens Shoulders & Forearms • Improves Wrist Agility. Technical Specification: •Post Dia: 80Nb Gi Main Vertical Support Pipe Of Shoulder Builder Is Fixed Over 10Mm Thick Base Plate. 10Mm Thick Clamping Plates Are Attached To Main Frame To Hold The Rest Assemblies •Wheel Structure: 25Nb Galvanized Pipe Bend To Form Ring Of Wheel And Spokes Are Made Up Of 15Nb G.I. Pipes That Connect To Each Other To Form A Wheel Of Shoulder Twirl. Nylon Knobs Are Provided On The Wheels For Gripping Purpose. This Wheel Is Fixed To Main Support With The Help Of 40Nb Connector Pipe With Specially Designed Bearing Housing. •Pipes: All Metal Pipes Are Hot Dipped Galvanized Pipes Conforming To Is 1239 Part 1 With Gi Thickness Of 60Micron. •Pipe Materials Or Class: Medium Duty B Class And Heavy Duty C Class Series Of Pipes Only.Wall Thickness Of Pipe Varies According To Class/Series Of Pipe Used. •Powder Coating:It Shall Be Done With Pure Polyester Raw Material.Dry Film Thickness Maintained Within The Range Of 50-70 Microns.It Is Tested For Adhesion Test According To Astm-D-3359 With The Help Of Cross Hatch Cutter Instruments. •Bearing Housing Shall Be Made From Solid Bar Of Ms Material. •Bearing: Bearings Are Oil Sealed, Self-Lubricated Made Of Skf/ Ntn/ Nachi Make Shall Be Provided For Smooth & Trouble-Free Movement. •Pins And Circlips: 25Mm Diameter Pins Shall Be Made From En8 Material & Circlips Made From Standard Material. •Nut And Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts Are Used With Pvc Bolt Caps. All Open Ends Of Pipe Been Closed By Gi / Pvc Caps For User Safety Against Entrapment. The Casting Of Above Structure Must Be As Per Direction Of Site Incharge. Providing & Fixing Of Leg Lift Post Having Dimension : • Product Area : 1.8M X 0.8M 5.9Ft X 2.6Ft • Safe Play Area : 2.8M X 1.8M 9.2Ft X 5.9Ft • Ideal For : 13 Years & Above Function: • Target Abdomen And Thigh Muscles Technical Specification: •Main Frame: 80Nb Gi Main Vertical Support Pipe Of Leg Lift Post Is Fixed Over 10Mm Thick Base Plate. •Back Rest: 6 No Of Spacer Pipes Made By 25 Nb G.I Pipes Are Arranged In Parallel At Equidistance To Form A Back Rest Of Product. •Handle: The Paired Handle Pipe Consists Of 25Nb Galvanized Pipe Fixed At The Top And Bottom Of 80Nb Support Pipe Main Frame. All Pipes Are •Pipes: All Metal Pipes Are Hot Dipped Galvanized Pipes Conforming To Is 1239 Part 1 With Gi Thickness Of 60Micron. •Pipe Materials Or Class: Medium Duty B Class And Heavy Duty C Class Series Of Pipes Only.Wall Thickness Of Pipe Varies According To Class/Series Of Pipe Used. •Powder Coating:It Shall Be Done With Pure Polyester Raw Material.Dry Film Thickness Maintained Within The Range Of 50-70 Microns.It Is Tested For Adhesion Test According To Astm-D-3359 With The Help Of Cross Hatch Cutter Instruments. •Nut And Bolts: Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts Are Used With Pvc Bolt Caps. All Open Ends Of Pipe Been Closed By Gi / Pvc Caps For User Safety Against Entrapment. The Casting Of Above Structure Must Be As Per Direction Of Site Incharge.

TRN :19231998
Corporations And Associations And Others / Municipal Corporation
Bharatpur - Rajasthan

INDIAN Hire Our Expertise :

  • Tender Bidding
  • Tender Consultancy
  • Tender Advisory
  • Identify Eligibility Criteria
  • Identify Penelty Clauses
  • Highlight Important Dates
  • Technical Bid Preparation
  • Offline Bid Preparation
  • Online Bid Preparation
  • Offline Bid Submission
  • Online Bid Submission
  • Track Corrigendum / Addendums
  • Attend Pre Bid Meetings
  • Consistent Liaison & Coordination
  • EMD Follow Ups

INDIAN - bidding
image

We heartily welcome your move to excel your business to new heights.

Set Tender Alert

Activate daily alerts to know the tenders available of your work.

Get alerts

Bidding Support

Ask experts, how to fill bid forms, submit bids, participate in bids.

Get in touch

GeM Registration

Looking for GeM Registration? Get in touch with us and we will do the needful.

Registration

Digital Certificate

Get DSC for e-Tendering, e-Auction, e-bidding, Corporations / Associations / Others Tenders

Purchase now

Tender Awards

Want to know who's got the tender and are looking for subcontracting?

Connect now

Projects

Government and other private players, Real-time Updates of Project Information

Get info

International Tenders

We almost cover all the regions and countries across the world. Click to take your business to new heights.

Start now

Web Design

Get the Best Offers & Deals, expertise in developing static websites, dynamic websites and e-commerce.

Design now

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us

W B


Copyright ©2018 - Thetenders.com. Read Policies