Notice Inviting Tender (NIT) by the Government Departments Of Uttar Pradesh for Tender For Repair Work In Government High School Niyamatpur Firozabad Under Alankar Yojana - Dismantling doors and windows leaves including chaukhats but excluding hold fasts and including stacking of materials as directed by Engineer-In-Charge within a distance of 60 meters (200 feet) CH-17 -SI NO. 15 (705) 2 Dismantling existing plaster including disposal of refuse as directed by Engineer-In-Charge within a distance of 60 meters. CH-17 -SI NO. 16 (706) 3 Earthwork in excavation in trenches for foundation pipes cable etc. in ordinary soil, including lift upto 1.5 m lead upto 50 m and dressing of sides and ramming of bottom and disposal of surplus excavated earth including all labour, T&P etc. for proper completion of work, as directed by Engineer Incharge. (SI. no. 251) 4 Class-150 Brick work in 1:3 cement and coarse sand of 1.25 FM mortar in super structure including necessary moulding and cutting of bricks as required including supply of all materials, labour and T&P etc. required for proper completion of the work thickness of wall of half brick thick.CH-6 -SI NO. 2(6.1) 5 Providing and laying in cement concrete 1:1.5:3(1cement:1.5 fine sand:3 graded brick aggregate 20 mm nominal size) and curing complete including cost of formwork in foundation and floors. (SI. No. 275) 6 Providing and laying in cement concrete 1:4:8 (1cement:4fine sand:8graded brick aggregate 40 mm nominal size) and curing complete including cost of formwork in foundation and floors. (SI. No. 275) 7 Fixing to steel or wooden chaukhats in position. CH-10 -SI NO. 9(11.14) (Labour only) Door chaukhats above 1.5 Sq.m. and upto 5 Sq.M. 8 Fixing to steel or wooden chaukhats in position. CH-10 -SI NO. 9(11.14) (Labour only) window chaukhats above 1.5 Sq.m. and upto 5 Sq.M. 9 Fixing to steel or wooden chaukhats in position. CH-10 -SI NO. 9(11.14) (Labour only) ventilator chaukhats above 1.5 Sq.m. and upto 5 Sq.M. 10 Provinding and fixing glass panes with putty and glazing clips in steel doors, windows,clerestory windows all complete with : 4.0 mm thick panes.CH-9 -SI NO. New(14) 11 Mild steel or iron work in heavy sizes such as built up gates record rack, roof work, gates etc. brought to required form including drilling holes revitting or welding where necessary, and also including supply of steel bolts, nuts, wastage etc. and their fixing require for proper completion of the work. CH-10 -SI NO. 2, (503) 12 Mild steel and iron work of small size and section such as holding down woods, hold fasts tierods, grating, etc. (When not included in and over all rates) brought to required form including supply of steel and its wastage including cost of bolts, nuts if required for proper completion of work including fabrication of holes in door chaukhats and nosing. CH-10 -SI NO. 3, (502) 13 Providing and laying vitrified floor tiles in different sizes (thickness to bespecified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.With out base concrete CH-14 -SI NO. 24 (11.41) Same as above but for 600X600mm size. 14 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead : CH-13 -SI NO. 18(14.1) (b) With cement mortar 1:4 (1cement: 4 coarse sand) 15 12 mm cement plaster 1:4 (1 cement and 4 finesand) in single coat on fair side of single or half brick wall for interior plastering upto floor two level including internal rounded angels chamfers, and/or rounded angles not exceeding 80 mm. In girth and finished even and smooth. No extra for mixing any additive. (Ch. 13 item no. 13.4 Newly Surface. 16 Finishing walls with one coat of waterproof cement paint of approved quality on previously old treated surface with this paint to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powder material including curing and cost of all materials. Ch. 15 item no. 19.29 17 Finishing walls with one coat of waterproof cement paint of approved quality on previously old treated surface with this paint to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powder material including curing and cost of all materials. Ch. 15 item no.662 18 Providing & Applying plaster of Paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. Ch. 15 item no. 31-NEW 19 One priming coat & two coat oil distemper on new work including supply of all materials, labour, T&P etc. required for proper completion of work. Paint to be used should confirm ISI no. 103-1950. (SI. No. 9+10-682) chapter -16 20 Painting 1st coat over priming coat (but excluding cost of priming coat) on steel and other metal surfaces upto 10cm width or girth or small articles not exceeding 0.10 Sq.M. in area with superior synthetic enamel such as Luxol 3, Hi gloss Apcolite, Superlac, Dulux specified brushing to give and even shade and including the cleaning the surface of all dirt, dust and other foreign matter sand papering and scrapping including cost of all materials, labour, tools and plants etc. required for proper completion of work.( ch-15 ,2-19.29 +3-642) 21 Painting 1st coat over priming coat (but excluding cost of priming coat) on steel and other metal surfaces upto 10cm width or girth or small articles not exceeding 0.10 Sq.M. in area with superior synthetic enamel such as Luxol 3, Hi gloss Apcolite, Superlac, Dulux specified brushing to give and even shade and including the cleaning the surface of all dirt, dust and other foreign matter sand papering and scrapping including cost of all materials, labour, tools and plants etc. required for proper completion of work.( ch-15 SI NO 3-642 ) 22 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. 23 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets,cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C. P. brass pillar taps 24 Supply & fixing of 11 cm (4) internal dia. PVC down pipes complete with rosehead, bends and gratings & including supply of necessary M.S. clamps 2.5cmx 3 mm1x 1/8) fixed to walls, with & includiug supply of 15cm (6) long 6 mm(1/4) dia. nails & including supply of all material labour and T&P etc. required for proper completion of the work & also including repair of plaster,pointing etc. if damaged during fixing of pipes. Details of 30 length. Toilet Waste Water 25 Note - 1. Cost of maintenance of road for five years will be paid as per G.O. No. 17/2024 SA-113/23-1-2024-23-1099/113/2023 Date 16-01-2024 2. The departmental road roller if spare, shall be made available to the contructior at site @ Rs. 2500 per day shall be made from contractors bell for idle period 3.Payment of maintenance shall be made as per final execution of civil work wich may vary from the BOQ. in Firozabad - Uttar Pradesh has been published.
The last date of this tender is 14/05/2025, work value is  0 (Refer Doc) INR, EMD is  66000 INR and tender document fees is  856 INR
For more details call us on +91 92760 83333 for bidding support this tender, GeM, vendor registration (if any) and tender BOQ documents.