Notice Inviting Tender (NIT) by the Central Government And Public Sector Of India for Supply, Fixing And Assembling Of Gear Box Sub Assembly Comprising Of Components Asper Drg.- Sk. No. 35T/Jmp/Jack/01/2017, Alt.-2 And Base Plate As Per Drg.- Sk. No. 35T/Jmp/Jack/08/2017, Alt.-2. Warranty Period: 30 Months After The Date Of Delivery Supply, Fixing And Assembling Of Screw Spindle Sub Assembly Comprising Of Components As Per Sk. No. 35T/Jmp /Jack/29/2017, Alt.-2 & Supply, Fixing And Assembling Of Subassembly Of Worm & Worm Wheel As Per Drg.-Sk. No. 35T/Jmp/Jack/29/2017, Alt.-2. Make For Bearings: Skf/Fag/Mbe, For Seals: Royal / Alley / Sunny / Supreme. Warranty Period: 30 Months After The Date Of Delivery Supply, Fixing And Assembling Of Lifting Sub Assembly Comprising Of Components As Per Drg.-Sk. No. 35T/Jmp /Jack/26/2017, Alt.-2. Warranty Period: 30 Months After The Date Of Delivery Supply, Fixing And Assembling Of Gear Box & U Beam Assembly Comprising Subcomponents As Per Drg.- Sk. No. 35T/Jmp/Jack/31/2017, Alt.-2. Supply Of All Components Except Gear Box And Fixing And Assembling Of All Components Including Gear Box As Per Complete Assembly Drawing U Beam To Sk. No. 35T/Jmp/Jack/02/2017, Alt.-1. Warranty Period: 30 Months After The Date Of Delivery Supply, Fixing And Assembling Of Sub Assembly Of Comprising Of Rear Wheel & Handle Assembly Comprising Of Components As Per Drg.-Sk. No. 35T/Jmp/Jack/30/2017, Alt.-2 & Supply, Fixing And Assembling Of Sub Assembly Of Sprocket And Chain Comprising Of Components As Per Drg.-Sk. No. 35T/Jmp/Jack/28/2017, Alt.2 & Supply, Fixing And Assembling Of Sub Assembly Of Side Wheel With Shaft Assembly Comprising Of Components As Per Drg.-Sk. No. 35T/Jmp /Jack/30/2017, Alt. 2. Make For Chain : Diamond / Renold / Skf / Rolon. Warranty Period: 30 Months After The Date Of Delivery Spares With Metallic Kit Box Complete, One Set Consisting Of 14 Items As Per Annexure Attached, Make: Mbe / Snt / Bch / Delta / Royal / Mescab / Kdk / Diamond. Warranty Period: 30 Months After The Date Of Delivery Supply, Fitment, Assembling Of Pendent Type Push Button Assembly With 2 Nos. Of Normally Open Inching Type Push Button Suitable For With Cable Entry Arrangement For 35 Ton Jack. Fibre Body. Make: Snt / L&T / Havells / Bch. Warranty Period: 30 Months After The Date Of Delivery Supply Fitment Assembling Of Heavy Duty General Purpose Limit Switch Oil Tight On Line Diecast Aluminum Housing Suitable For 35 Ton Jack Supply Quick Brake Spring Loaded Leverwith Roller 01 No. + 01 Nc With Normal Angular Roller Lever. With Quantity: 3. Nos. Perjack. Make: Snt / L&T / Havells / Bch. Warranty Period: 30 Months After The Date Of Delivery Supply, Fitment, Assembling Of 4 Core Cable 10 Sq. Mm 80/0.4Mm Copper Conductorinsulated And Heavy Duty Sheathed Flexible Core 1100 Volt Grade Conforming To Is-694Pl-1 1981. Qty. 100 Mtrs. Roll Per Set Make: Kdk / Mescab / Snt / Havells. Warranty Period: 30 Months After The Date Of Delivery Supply, Fitment, Assembling Of Single Core 4 Sq.Mm 56/0.3 Mm Copper Conductor Insulated And Sheathed Cable 1100V Grade. Make : Snt / Kdk /Mescab / Havells. Warranty Period: 30 Months After The Date Of Delivery Supply, Fitment, Assembling Of Air Brake Direct On Line Starter With 2 Sets Of 3 Pole Contactor, Each Set Controlled Separately By 415V, 50Hz, Ac Contactor Coils. One Set Of Contractor Coil Is To Be Controlled By The Forward Direction Of Rotation Through An Inching Type Push Button And The Other Set Through Another Inching Button To Control The Reverse Direction Of 10 Hp, 3 Phase, 50 Hz 415 Volts Ac Motor. There Must Be Electrical Interlocking Contact To Prevent Both Set Of Contactors To Close Simultaneously. Each Of Above Push Buttons Should Have One Normally Closed Auxiliary Contact And One Stop Push Button. The Starter Shall Be Complete With Over Load, Shall Be Wired And Shall Be Provided With Power Plug And Socket With Locking Arrangement As Per Schematic Diagrams Mention Below: 1. Drg. No. 10 Hp Jack Bom, 2. Drg. No. 10 Hp Jack Ckt, 3. Drg. 10 Hp Jack Ga Each Starter To Be Provided With 2 Nos. Power Plug And Socket And 2 Nos. Of Control Plug And Socket. Maximum Dimension: 280 Mm B X 360 Mm L X 162 Mm T. As Per Material Specification Is : 13947 Part-4 Sec-1 1993. Make-Bch/Snt/Havelis. Warranty Period: 30 Months After The Date Of Delivery Supply, Fitment, Assembling Of 10 Hp Brake Motor With Fail Safe Disc Brake Assembly. Material Specification Is - 325/1996 And As Per Following: - Motor 10 Hp Squirrel Cage Totally Enclosed Fan Cooled Horizontal Foot Mounted With Brake Attachment Complete With Fan Cover Keys, Including Holding Down Bolt For Brake Fail Safe Disc Brake, To Be Fitted With The Motor Mentioned Above With Electromagnetic Complete With Suitable Cover And Tool. Complete Maintenance / Operation Manual In Duplicate To Be Provided With Motor And Brake Assembly, Make: Delta / Pethe / Abb / Bch / Crompton. Warranty Period: 30 Months After The Date Of Delivery Supply, Fitment, Assembly Of Air Brake Direct On Line Starter Wall Mounting Type With Pushbutton Control, Suitable For 3 Phase, 50Hz, 415V. 40Hp Motor. The Starter Shall Be Complete With Over Load And No Volt Protection. Citation Dol Motor Starter In Sheet Steel Enclosure With Citation E Contactor With 380-415 V Coil, Cat Ref Nact2leem, Over Load Relay Range 37.6 To 60A, 70A Contactor, Citation E Contactor Very Rugged And Reliable Contactor Having Mechanical Interlocking Facility. Make : Bch/L&T/Havells. Warranty Period: 30 Months After The Date Of Delivery in Jamalpur - Bihar has been published.
The last date of this tender is 17/04/2023, work value is  0 (Refer Doc) INR, EMD is  1332060 INR and tender document fees is  0 (Refer Doc) INR
For more details call us on +91 92760 83333 for bidding support this tender, GeM, vendor registration (if any) and tender BOQ documents.

Tender Document

Related Information

Location

Jamalpur - Bihar ( IN )

Ownership

Central Government And Public Sector Of India

Sector

Railway Transport

Important Dates

Published on

25 Mar, 2023

Submission Date

17 Apr, 2023

Opening Date

17 Apr, 2023

Key Values

Work Value

Refer Doc

EMD

13.32 Lacs

Document Fee

Refer Doc
Tender Document Liaison Service Connect with us