Notice Inviting Tender (NIT) by the State Government Of Bihar for Mr-N/22-23 Masaurhi/05 - Masaurhi Pali Path Puranchak Se Chhotki Masaurhi Via Dighma Mahadepur Dhanauti, Clearing And Grubbing Road Land By Manual Means Including Uprooting Wild Vegetation, Grass, Bushes, Shrubs, Saplings And Trees Of Girth Upto 300Mm, Removals Of Stumps Of Such Trees Cut Earlier & Disposal Of Unserviceable Materials & Stacking Of Serviceable Materials To Be Used Or Auctioned Upto A Lead Of 1000 M Including Removal And Disposal Of Top Organic Soil Not Exeeding 150Mm In Thickness As Per Technical Specification Clause 201.1 And Direction Of E/I, Dismantling Of Cement Concrete Pavements By Mechanical Means Using Pneumatic Tools Breaking To Pieces Not Exceeding 0.02 Cum In Volume And Stock Piling At Designated Locations And Disposal Of Dismantled Materials Upto A Lead Of 1000 M, Stacking Serviceable And Unserviceable Materials Separately, Construction Of Subgrade And Earthen Shoulders :-Construction Of Subgrade And Earthen Shoulders With Approved Material Obtained From Borrow Pits With All Lifts And Leads, Transporting To Site, Spreading, Grading To Required Slope And Compacted To Meet Requirement Of Table 300.2 With Lead Upto 1000 M As Per Technical Specification Clause 303.1., Granular Sub-Base With Well Graded Material Table 400.1 :- Construction Of Granular Sub-Base By Providing Well Graded Material, Spreading In Uniform Layers With Motor Grader On Prepared Surface, Mixing By Mix In Place Method With Rotavator At Omc, And Compacting With Smooth Wheel Roller To Achieve The Desired Density, Complete As Per Technical Specification Clause 401., Wbm Grading 2 By Mechanical Means :- Providing, Laying, Spreading And Compacting Stone Aggregates Of Specific Sizes To Water Bound Macadam Specification Including Spreading In Uniform Thickness, Hand Packing, Rolling With Three Wheel 80-100 Kn Static Roller In Stages To Proper Grade And Camber, Applying And Brooming, Crushable Screening To Fill-Up The Interstices Of Coarse Aggregate, Watering And Compacting To The Required Density Grading 2 As Per Technical Specification Clause 405., Wbm Grading 3 By Mechanical Means :- Providing, Laying, Spreading And Compacting Stone Aggregates Of Specific Sizes To Water Bound Macadam Specification Including Spreading In Uniform Thickness, Hand Packing, Rolling With Smooth Wheel Roller 80-100 Kn In Stages To Proper Grade And Camber, Applying And Brooming, Stone Screening To Fill-Up The Interstices Of Coarse Aggregate, Watering And Compacting To The Required Density Grading 3 As Per Technical Specification Clause 405., Prime Coat Low Porosity :- Providing And Applying Primer Coat With Bitumen Emulsion Ss-1 On Prepared Surface Of Granular Base Including Cleaning Of Road Surface And Spraying Primer At The Rate Of 0.70- 1.0 Kg/Sqm Using Mechanical Means As Per Technical Specification Clause 502., Tack Coat :- Providing And Applying Tack Coat With Bitumen Emulsion Using Emulsion Pressure Distributor At The Rate Of 0.25 To 0.30 Kg Per Sqm On The Prepared Granular Surface Tretaed With Primer And Clened With Hydriloc Broom As Per Technical Specification Aclouse 503., Patch Work Over Wbm Using Mix Seal Surface With Waste Plastic For Bituminous And Existing Cc Pavement :- Providing, Laying And Rolling Of Close-Graded Premix Surfacing Material Of 20 Mm Thickness Composed Of 11.2 Mm To 0.9 Mm Type-A Or 13.2 Mm To 0.9 Mm Type-B Aggregates Using Penetration Grade Bitumen To Required Line, Grade And Level To Serve As Wearing Course On A Previously Prepared Base, Including Mixing In A Suitable Plant, Laying And Rolling With A Three Wheel 8-10 Kn Static Roller And Finishing To Required Level And Grades As Per Technical Specification Clause 509.With Waste Plastic, Tack Coat :- Providing And Applying Tack Coat With Bitumen Emulsion Using Emulsion Pressure Distributor At The Rate Of 0.25 To 0.30 Kg Per Sqm On The Prepared Granular Surface Tretaed With Primer And Clened With Hydriloc Broom As Per Technical Specification Aclouse 503., Semi-Dense Bituminous Concrete :- Providing And Laying Semi Dense Bituminous Concrete With 100-120 Tph Batch Type Hmp Producing An Average Output Of 75 Tonnes Per Hour Using Crushed Aggregates Of Specified Grading, Premixed With Bituminous Binder @ 4.5 To 5 Per Cent Of Mix And Filler, Transporting The Hot Mix To Work Site, Laying With A Hydrostatic Paver Finisher With Sensor Control To The Required Grade, Level And Alignment, Rolling With Smooth Wheeled, Vibratory And Tandem Rollers To Achieve The Desired Compaction As Per Morth Specification Clause No. 508 Complete In All Respects., Construction Of Dry Lean Cement Concrete Sub- Base Over A Prepared Sub-Grade With Coarse And Fine Aggregate Conforming To Is: 383, The Size Of Coarse Aggregate Not Exceeding 25 Mm, Aggregate Cement Ratio Not To Exceed 15:1, Aggregate Gradation After Blending To Be As Per Table 600-1, Cement Content Not To Be Less Than 150 Kg/ Cum, Optimum Moisture Content To Be Determined During Trial Length Construction, Concrete Strength Not To Be Less Than 10 Mpa At 7 Days, Mixed In A Batching Plant, Transported To Site, Laid With A Paver With Electronic Sensor, Compacting With 8-10 Tonnes Vibratory Roller, Finishing And Curing., Cement Concrete Pavement :- Construction Of Un-Reinforcedplain Cement Thickness As Perdesign, Over A Prepared Sub Base With 43 Grade Cement Or Any Other Type As Per Clause 1501.2.2 M 30 Grade Coarse And Fine Aggregate Maximum Size Of Aggregate Not Exceding 25Mm, Mixed In A Concrete Of Not Less Than 0.2Cum Capacity And Appropriate Weigh Batcher Using Approved Mix Design, Laid In Approved Fixed Side Formwork Steel Channel, Laying And Fixing Of 125 Micron Thick Plythene Film, Wedges, Steel Plates Including Levelling The Formwork As Per Drawing Spreading The Concrete With Shovels, Rakes, Compacted Using Needle, Screed And Plate Vibrators And Finished In Continuous Operation Including Provision Of Contraction And Expansion, Constrution Joints, Applying Debonding Strips, Primer, Sealant, Dowel Bars, Near Approaches To Bridge/ Culvert And Construction Joints, Admixtures As Approved, Curing Of Concrete Slab For 14 Days Curing Compound Where Specified And Water Finishing To Lines And Grade As Per Drawing And Technical Specification Clause 1501., Kilometre Stone :- Reinforced Cement Concrete M15 Grade Kilometre Local Stone Of Standard Design Asper Irc:8 Fixing In Position Including Painting And Printing, Etc As Per Drawing And Technical Specification Clause 1703. I Km Stone, Ii Km Stone, Iii 200 M Stone, Retro-Reflectorised Traffic Signs :- Providing And Fixing Of Retro-Reflectorised Cautionary, Mandatory And Informatory Sign As Per Irc:67 Made Of Encapsulated Lens Type Reflective Sheeting Vide Clause 1701.2.3 Fixed Over Aluminium Sheeting, 1.5 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Firmly Fixed To The Ground By Means Of Properly Designed Foundation With M15 Grade Cement Concrete 450 Mm X 450 Mm X 600 Mm, 600 Mm Below Ground Level As Per Drawings And Technical Specification Clause 801 I 600 Mm Equletral & Triangle, 600 Mm Circular, 600 Mm X 450 Mm Rectangular, Boundary Pillar/Gaurd Post :- Reinforced Cement Concrete M15 Grade Boundary Pillars/Local Stone Of Standard Design As Per Irc:25, Fixed In Position Including Finishing And Lettering But Excluding Painting As Per Drawing And Technical Specification Clause 1704, Planting Of Trees And Their Maintenance For One Year :- Planting Of Trees By The Road Side Avenue Trees In 0.60 M Dia Holes, 1 M Deep Dug In The Ground, Mixing The Soil With Decayed Farm Yard/Sludge Manure, Planting The Saplings, Backfilling The Trench, Watering, Fixing The Tree Guard And Maintaining The Plants For One Year, Road Marking With Hot Applied Thermoplastic :- Providing And Laying Of Hot Applied Thermoplastic Compound 2.5 Mm Thick Including Reflectorising Glass Beads @ 250 Gms Per Sqm Area, Thickness Of 2.5 Mm Is Exclusive Of Surface Applied Glass Beads As Per Irc:35 .The Finished Surface To Be Level, Uniform And Free From Streaks And Holes., At Edge For Cc Protion, Providing And Fixing Logo Of Maintenance Project :- Providing And Fixing Of Typical Mmgsy Informatory Sign Board With Logo As Per Mord Specifications And Drawing. Three Ms Plates Of 1.6 Mm Thick, Top And Middle Plate Duly Welded With Ms Flat Iron 25Mm X 5M Size On Back On Edges. The Lower Plate Will Be Welded With Ms Angle Iron Frame Of 25Mm X 25Mm X 5Mm. The Angle Iron Frame Of The Lower Most Plate And Flat Iron Frame Of Middle Plate Will Be Welded To 2 Nos. 75Mm X 75 Mm Of 12 Swg Sheet Tubes Posts Duly Embedded In Cement Concrete M-15 Grade Blocks Of 450Mm X 450Mm X 600Mm, 600Mm Below Ground Level. The Top Most Diamond Plate Will Be Welded To Middle Plate By 47Mm X 47Mm Of 12 Swg Steel Plate Tube. All M.S. Will Be Stove Enameled On Both Sides. Lettering And Printing Arrows, Border Etc. Will Be Painted With Ready Mixed Synthetic Enamel Paint Of Superior Quality In Required Shade And Colour. All Sections Of Framed Posts And Steel Tube Will Be Painted With Primer And Two Coats Of Epoxy Paint As Per Drawing Clause 1701 And Annexure 1700.1, Earth Work In Excavation Of Foundation Trenches :-- Earthwork In Excavation For Structures As Per Drawing And Technical Specifications Clause 305.1 Including Setting Out, Construction Of Shoring And Bracing, Removal Of Stumps And Other Deleterious Material And Disposal Upto A Lead Of 50 M, Dressing Of Sides And Bottom And Backfilling In Trenches With Excavated Suitable Material., Sand Filling In Foundation :-- Sand Filling In Foundation Trenches As Per Drawing And Technical Specification Clause 1108 ., Providing M15 Pcc 1:2.5:5 As Levelling Course In Foundation :-- Providing Pcc M 15 1:2.5:5 Concrete For Plain Concrete In Open Foundations Complete As Per Drawings And Technical Specifications Clause 802, 803, 1202 & 1203, Brick Masonary In C.M.1:4 In Foundation :-- Brick Masonry Work In Cement Mortar Cm 1:4 In Foundation Complete Excluding Pointing And Plastering As Per Drawing And Technical Specifications Clauses 602, 603, 604, 1202 & 1203, Brick Masonary In C.M.1:4 In Sub Structure :-- Brick Masonry Work In Cement Mortar Cm 1:4 In Substructure And Kerb Complete Excluding Pointing And Plastering As Per Drawing And Technical Specifications Clauses 602, 603, 604, 1202 & 1203, Plain/Reinforced Cement Concretem-20 In Substructure Complete As Per Drawings And Technical Specification Clauses 802, 804, 805, 806, 807, 1202 Ans 1204, Providing Bitumen Painting Over Top Surface Of Abutment Cap & Inner Vertical Surface Of Dirt Wall Including Heating The Bitumen & Cost Of Painting Brush Etc. All Complete., Providing Rcc M25 In Deck Slab :-- Providing And Laying Reinforced Cement Concrete In Superstructure Deck Slab M25 As Per Drawing And Technical Specifications Clauses 800, 1205.4, 1205.5, Supplying, Fitting And Placing Hysd Bar Reinforcement In Super-Structure Complete As Per Drawing And Technical Specifications, Providing And Filling Joint Sealing Compound As Per Drawings And Technical Specifications With Coarse Sand And 6 Per Cent Bitumen By Weight, Brick Masonry Work In Cement Mortar 1:3 In Parrapet Excluding Pointing And Plastering As Per Drawing And Technical Specifications Clauses 600, 900 And 1208.4, Plastering With Cement Mortar 1:4 :-- Plastering With Cement Mortar 1:4 On Brick Work In Sub-Structure As Per Technical Specifications, Providing 1.5 Mm Thick Neat Cement Punning:--Providing 1.5 Mm Cement Punning Including Curing Carriage Of Water With All Leads And Lifts As Per Building Specification And Direction Of E/I, Providing Weep Holes In Abutement :-- Providing Weepholes In Brick Masonary, Plain / Reinforced Concrete Abutement, Wing Wall, Return Wall With 100 Mm Dia Ac Pipe Extending Through The Full Width Of The Structure With Slope Of 1V: 20H Towards Drawing, Brick Masonary In C.M.1:3 In Parapet :- Brick Masonry Work In Cement Mortar 1:3 In Parapet Excluding Pointing And Plastering As Per Drawing And Technical Specifications Clauses 600, 900 And 1208.4, Plastering With Cement Mortar 1:4:- Plastering With Cement Mortar 1:4 On Brick Work In Sub-Structure As Per Technical Specifications, Painting Two Coats On New Concrete Surfaces :- Painting Two Coats Including Primer Coat After Filling The Surface With Synthetic Enamel Paint In All Shades On New, Plastered / Concrete Surfaces As Per Drawing And Technical Specification Clause 1701, 1% Labour Construction, 12% Gst Construction, Total Seigniorage Fee Construction, Maintainance, 1% Labour Maintainance, 12% Gst Maintainance, Total Seigniorage Fee Maintainance, T010 Bhojpur Karay Path Se Suktiya, Clearing And Grubbing Road Land By Manual Means Including Uprooting Wild Vegetation, Grass, Bushes, Shrubs, Saplings And Trees Of Girth Upto 300Mm, Removals Of Stumps Of Such Trees Cut Earlier & Disposal Of Unserviceable Materials & Stacking Of Serviceable Materials To Be Used Or Auctioned Upto A Lead Of 1000 M Including Removal And Disposal Of Top Organic Soil Not Exeeding 150Mm In Thickness As Per Technical Specification Clause 201.1 And Direction Of E/I, Dismantling Of Cement Concrete Pavements By Mechanical Means Using Pneumatic Tools Breaking To Pieces Not Exceeding 0.02 Cum In Volume And Stock Piling At Designated Locations And Disposal Of Dismantled Materials Upto A Lead Of 1000 M, Stacking Serviceable And Unserviceable Materials Separately, Construction Of Subgrade And Earthen Shoulders :-Construction Of Subgrade And Earthen Shoulders With Approved Material Obtained From Borrow Pits With All Lifts And Leads, Transporting To Site, Spreading, Grading To Required Slope And Compacted To Meet Requirement Of Table 300.2 With Lead Upto 1000 M As Per Technical Specification Clause 303.1., Granular Sub-Base With Well Graded Material Table 400.1 :- Construction Of Granular Sub-Base By Providing Well Graded Material, Spreading In Uniform Layers With Motor Grader On Prepared Surface, Mixing By Mix In Place Method With Rotavator At Omc, And Compacting With Smooth Wheel Roller To Achieve The Desired Density, Complete As Per Technical Specification Clause 401., Wbm Grading 2 By Mechanical Means :- Providing, Laying, Spreading And Compacting Stone Aggregates Of Specific Sizes To Water Bound Macadam Specification Including Spreading In Uniform Thickness, Hand Packing, Rolling With Three Wheel 80-100 Kn Static Roller In Stages To Proper Grade And Camber, Applying And Brooming, Crushable Screening To Fill-Up The Interstices Of Coarse Aggregate, Watering And Compacting To The Required Density Grading 2 As Per Technical Specification Clause 405., Wbm Grading 3 By Mechanical Means :- Providing, Laying, Spreading And Compacting Stone Aggregates Of Specific Sizes To Water Bound Macadam Specification Including Spreading In Uniform Thickness, Hand Packing, Rolling With Smooth Wheel Roller 80-100 Kn In Stages To Proper Grade And Camber, Applying And Brooming, Stone Screening To Fill-Up The Interstices Of Coarse Aggregate, Watering And Compacting To The Required Density Grading 3 As Per Technical Specification Clause 405., Prime Coat Low Porosity :- Providing And Applying Primer Coat With Bitumen Emulsion Ss-1 On Prepared Surface Of Granular Base Including Cleaning Of Road Surface And Spraying Primer At The Rate Of 0.70- 1.0 Kg/Sqm Using Mechanical Means As Per Technical Specification Clause 502., Tack Coat :- Providing And Applying Tack Coat With Bitumen Emulsion Using Emulsion Pressure Distributor At The Rate Of 0.25 To 0.30 Kg Per Sqm On The Prepared Granular Surface Tretaed With Primer And Clened With Hydriloc Broom As Per Technical Specification Aclouse 503., Patch Work Over Wbm Using Mix Seal Surface With Waste Plastic For Bituminous And Existing Cc Pavement :- Providing, Laying And Rolling Of Close-Graded Premix Surfacing Material Of 20 Mm Thickness Composed Of 11.2 Mm To 0.9 Mm Type-A Or 13.2 Mm To 0.9 Mm Type-B Aggregates Using Penetration Grade Bitumen To Required Line, Grade And Level To Serve As Wearing Course On A Previously Prepared Base, Including Mixing In A Suitable Plant, Laying And Rolling With A Three Wheel 8-10 Kn Static Roller And Finishing To Required Level And Grades As Per Technical Specification Clause 509.With Waste Plastic, Tack Coat :- Providing And Applying Tack Coat With Bitumen Emulsion Using Emulsion Pressure Distributor At The Rate Of 0.25 To 0.30 Kg Per Sqm On The Prepared Granular Surface Tretaed With Primer And Clened With Hydriloc Broom As Per Technical Specification Aclouse 503., Semi-Dense Bituminous Concrete :- Providing And Laying Semi Dense Bituminous Concrete With 100-120 Tph Batch Type Hmp Producing An Average Output Of 75 Tonnes Per Hour Using Crushed Aggregates Of Specified Grading, Premixed With Bituminous Binder @ 4.5 To 5 Per Cent Of Mix And Filler, Transporting The Hot Mix To Work Site, Laying With A Hydrostatic Paver Finisher With Sensor Control To The Required Grade, Level And Alignment, Rolling With Smooth Wheeled, Vibratory And Tandem Rollers To Achieve The Desired Compaction As Per Morth Specification Clause No. 508 Complete In All Respects., Construction Of Dry Lean Cement Concrete Sub- Base Over A Prepared Sub-Grade With Coarse And Fine Aggregate Conforming To Is: 383, The Size Of Coarse Aggregate Not Exceeding 25 Mm, Aggregate Cement Ratio Not To Exceed 15:1, Aggregate Gradation After Blending To Be As Per Table 600-1, Cement Content Not To Be Less Than 150 Kg/ Cum, Optimum Moisture Content To Be Determined During Trial Length Construction, Concrete Strength Not To Be Less Than 10 Mpa At 7 Days, Mixed In A Batching Plant, Transported To Site, Laid With A Paver With Electronic Sensor, Compacting With 8-10 Tonnes Vibratory Roller, Finishing And Curing., Cement Concrete Pavement :- Construction Of Un-Reinforcedplain Cement Thickness As Perdesign, Over A Prepared Sub Base With 43 Grade Cement Or Any Other Type As Per Clause 1501.2.2 M 30 Grade Coarse And Fine Aggregate Maximum Size Of Aggregate Not Exceding 25Mm, Mixed In A Concrete Of Not Less Than 0.2Cum Capacity And Appropriate Weigh Batcher Using Approved Mix Design, Laid In Approved Fixed Side Formwork Steel Channel, Laying And Fixing Of 125 Micron Thick Plythene Film, Wedges, Steel Plates Including Levelling The Formwork As Per Drawing Spreading The Concrete With Shovels, Rakes, Compacted Using Needle, Screed And Plate Vibrators And Finished In Continuous Operation Including Provision Of Contraction And Expansion, Constrution Joints, Applying Debonding Strips, Primer, Sealant, Dowel Bars, Near Approaches To Bridge/ Culvert And Construction Joints, Admixtures As Approved, Curing Of Concrete Slab For 14 Days Curing Compound Where Specified And Water Finishing To Lines And Grade As Per Drawing And Technical Specification Clause 1501., Kilometre Stone :- Reinforced Cement Concrete M15 Grade Kilometre Local Stone Of Standard Design Asper Irc:8 Fixing In Position Including Painting And Printing, Etc As Per Drawing And Technical Specification Clause 1703. I Km Stone, Ii 200 M Stone, Retro-Reflectorised Traffic Signs :- Providing And Fixing Of Retro-Reflectorised Cautionary, Mandatory And Informatory Sign As Per Irc:67 Made Of Encapsulated Lens Type Reflective Sheeting Vide Clause 1701.2.3 Fixed Over Aluminium Sheeting, 1.5 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Firmly Fixed To The Ground By Means Of Properly Designed Foundation With M15 Grade Cement Concrete 450 Mm X 450 Mm X 600 Mm, 600 Mm Below Ground Level As Per Drawings And Technical Specification Clause 801 I 600 Mm Equletral & Triangle, 600 Mm Circular, 600 Mm X 450 Mm Rectangular, Boundary Pillar/Gaurd Post :- Reinforced Cement Concrete M15 Grade Boundary Pillars/Local Stone Of Standard Design As Per Irc:25, Fixed In Position Including Finishing And Lettering But Excluding Painting As Per Drawing And Technical Specification Clause 1704, Planting Of Trees And Their Maintenance For One Year :- Planting Of Trees By The Road Side Avenue Trees In 0.60 M Dia Holes, 1 M Deep Dug In The Ground, Mixing The Soil With Decayed Farm Yard/Sludge Manure, Planting The Saplings, Backfilling The Trench, Watering, Fixing The Tree Guard And Maintaining The Plants For One Year, Road Marking With Hot Applied Thermoplastic :- Providing And Laying Of Hot Applied Thermoplastic Compound 2.5 Mm Thick Including Reflectorising Glass Beads @ 250 Gms Per Sqm Area, Thickness Of 2.5 Mm Is Exclusive Of Surface Applied Glass Beads As Per Irc:35 .The Finished Surface To Be Level, Uniform And Free From Streaks And Holes., At Edge For Cc Portion, Providing And Fixing Logo Of Maintenance Project :- Providing And Fixing Of Typical Mmgsy Informatory Sign Board With Logo As Per Mord Specifications And Drawing. Three Ms Plates Of 1.6 Mm Thick, Top And Middle Plate Duly Welded With Ms Flat Iron 25Mm X 5M Size On Back On Edges. The Lower Plate Will Be Welded With Ms Angle Iron Frame Of 25Mm X 25Mm X 5Mm. The Angle Iron Frame Of The Lower Most Plate And Flat Iron Frame Of Middle Plate Will Be Welded To 2 Nos. 75Mm X 75 Mm Of 12 Swg Sheet Tubes Posts Duly Embedded In Cement Concrete M-15 Grade Blocks Of 450Mm X 450Mm X 600Mm, 600Mm Below Ground Level. The Top Most Diamond Plate Will Be Welded To Middle Plate By 47Mm X 47Mm Of 12 Swg Steel Plate Tube. All M.S. Will Be Stove Enameled On Both Sides. Lettering And Printing Arrows, Border Etc. Will Be Painted With Ready Mixed Synthetic Enamel Paint Of Superior Quality In Required Shade And Colour. All Sections Of Framed Posts And Steel Tube Will Be Painted With Primer And Two Coats Of Epoxy Paint As Per Drawing Clause 1701 And Annexure 1700.1, Brick Masonary In C.M.1:3 In Parapet :- Brick Masonry Work In Cement Mortar 1:3 In Parapet Excluding Pointing And Plastering As Per Drawing And Technical Specifications Clauses 600, 900 And 1208.4, Plastering With Cement Mortar 1:4:- Plastering With Cement Mortar 1:4 On Brick Work In Sub-Structure As Per Technical Specifications, Painting Two Coats On New Concrete Surfaces :- Painting Two Coats Including Primer Coat After Filling The Surface With Synthetic Enamel Paint In All Shades On New, Plastered / Concrete Surfaces As Per Drawing And Technical Specification Clause 1701, 1% Labour Construction, 12% Gst Construction, Total Seigniorage Fee Construction, Maintainance, 1% Labour Maintainance, 12% Gst Maintainance, Total Seigniorage Fee Maintainance in Patna - Bihar has been published.
The last date of this tender is 30/06/2022, work value is  46240032 INR, EMD is  924801 INR and tender document fees is  10000 INR
For more details call us on +91 92760 83333 for bidding support this tender, GeM, vendor registration (if any) and tender BOQ documents.