Notice Inviting Tender (NIT) by the State Government Of Maharashtra for Contract For Pws At Durgwadi Khurd Mainkond Kadamwadi Sub Estimate No.1 Swith House Excacation For Foundation / Pipe Trenches In By Blasting In Soft Rock And Old Masonry Including Removing The Excavated Material Upto A Distance Of 50 M Beyond Area And Lifts As Below, Stacking As Directed By Engineer-In-Charge, Normal Dewatering, Preparing The Bed For Foundation And Excluding Backfilling, Etc. Complete. Providing And Laying In Situ Cement Concrete Of Trap/Granite/Quartzite/Gneiss Metal For Rcc Work In Foundation Like Raft Grillage Strip Foundation And Footing Of Rcc Columns And Steel Stanctions Including Normal Dewating Fromwrok Compaction Finishing And Curing Etc Complete Excluding Ms Or Tor Reinforcemen Providing Dry Trap/Granite/Quartzite/Gneiss, Rubble Stone Soling In 15Cm To 20 Cm Thick Layers Including Hand Packing And Compacting, Royalty Charges Etc. Complete Providing Laterite Stone Msonry In Cement Mortar 1:6 In Founation And Plinth Of Inner Wall Including Racking Out Joints Wher Plastering Is To Done Watering And Scaffolding Etc Complete Providing Laterite Stone Msonry In Cement Mortar 1:6 In Superstructer Of Inner Wall Including Racking Out Joints Wher Plastering Is To Done Watering And Scaffolding Etc Complete Providing And Fixing Factory Made Precast Door/ Window Frames With Shutter As Per Requirement And As Per Specification Without Fanlight Including Holdfasts Carting And Erecting In Position Etc Complete Door Providing And Fixing Factory Made Precast Door/ Window Frames With Shutter As Per Requirement And As Per Specification Without Fanlight Including Holdfasts Carting And Erecting In Position Etc Complete Window Providing And Fabricating Structural Steel Work In Roller Sections Like Joist Channels Angles Tees Etc Complete Providing And Fixing Zincalume Profiles Sheets For Roofing Including Etc Complete Providing Internal Cement Plaster 20Mm Thick In A Single Coat In Cement Mortar 1:3 Without Neeru Fininsh To Stone Masonry Surface In All Position Including Scaffolding Racking Out Joints Providing Groove At Joints Masonry Etc Complete Providing And Applying Two Coats Waterproof Cement Paint Of Approved Manufacturar And Approved Colour To The Plastered Surface Including Scaffolding And Necessary Preparation The Surface Etc Complete Pumping Machinery Providing Errecting And Giving Test Of Sub Mersible Pump Set Conforming Pump Set Conforming To Is 8034 An Motor Conforming To Is 9283 With Water Proof Winding Pump Shall Be Suitable Fo Various Delivery Head And Discharge With Stainless Steel Shaft Mortor Suitable For Working On 415+10% 3Ph 50Hza C Supply With Cable Guard, Thrust Carbon/Firbre Bearing To With Stand Entire Hydraulic Thrust. The Pump Sets Hall Be Suitable For Direct Coupling With Suitable Suction Straniner Pump Should Have Suitable Discharge Out Let As Per Manufactures Desing. Antithrust Stream Lined On Return Valve Shall Be Provided With The Pump 3 M Submersible Copper Conductor Cable In Single/Double Run And 2 Pair Of Erection Dclamps 65Mm Width 10Mm Thick Shall Be Provided Witheach Pump Submersible Pump 150 Mm Dia With Bronze Impeller Providing And Fixing Ci B/F Sluice Suitable Type Of Pressure Relief Valve/O Velocity Valve, Reflux Valve Of Following Dia Including All Taxes Central And Local Transportation Upto Site Of Work Unloading Stacking Etc Complete A 50Mm Dia Sluice Value B 50Mm Dia Nr Valve Providing Errecting And Giving Testing Of Vertical Drop Pipe 80Mm Dia Gi Medium Class In1.5M Or 1 M In Length Asper Site Condition With Heavy Duly Flanges Etc Complete Asper Detailed Specification Providing And Erecting Flat Flexible Sub Mersible Cable With Copper Condurctor Pvc Insulated And Pvc Sheathed Etc Complete Providing Errecting, Commission And Testing Of Floor Mounting Type Lt Pannel Board Asper Detailed Specifcating Skelton Type Providing Installing And Commissioning Ternal Electrification Arrangemetn As Directed By Engineer In Charge Providing And Errecting Triple Spur Gear Type Chain Pully Block Suitable For Capacity As Below With 6M Lift Complete With Load Chain Andhand Chain Suitable For Above Lift Ested 50% Over Load As Per Is 3832 Carrying Isi Mark Etc Complet Providing Structural Steel Work In Rolled Stanchions Fixed With Connecting Plates Or Angle Cleats As In Main And Cross Beams, Hip And Jack Rafters, Purlins Connecting To Truss Members And Like As Per Detailed Designs And Drawings Or As Directed By Engineer-Incharge Including Cutting, Fabricating, Hoisting, Erecting, Fixing In Position, Making Riveted / Bolted / Welded Connections And One Coat Of Anticorrosive Paints And Over It Two Coats Of Oil Painting, Etc. Complete Providing And Fixing M.S. Chequerred Plate Flooring Of Following Thickness Supported On M.S.Angles 25 X 25 X 5 Mm Size Including Welding, Cutting And Fabricating The Plate To The Required Square Or Rounding Shape, Making Holes In The Plate, Including Providing And Applying 3 Coats Of Anticorrosive Paint, Etc. Complete As Directed By Engineer-In-Charge Providing And Fixing G.I. Pipe Railing Having 1.0M Height Consisting 50 X 50 X 6 Mm Thick M. S. Angles As Verticals At 1.5 M C/C, Distance And Additional Posts At Every Corner Bends To Curved Shape With 3 Rows Of 25 Mm Dia G.I. Pipes Of Medium Class Variety As Horizontal And Painting 3 Coats Of Oil Paint Over 1 Coat Of Anticorrosive Paint Of Approved Colour And Shade Including Cost Of All Labour, Transporting Bends To Curved Shape, Etc. Complete Risin Main Excavation For Foundation / Pipe Trenches In Earth, Soils Of All Types, Sand, Gravel And Soft Murum, Including Removing The Excavated Material Upto A Distance Of 50 Metres And Lifts As Below, Stacking And Spreading As Directed, Normal Dewatering, Preparing The Bed For Foundation And Excluding Backfilling, Etc. Complete Excavation For Foundation / Pipe Trenches In Hard Rock By Controlled Blasting, Including Trimming And Levelling The Bed By Chiselling Where Necessary And Removing The Excavated Material And Stacking It In Measurable Heaps Within A Distance Of 50 Metres From The Area And Lifts As Below, Normal Dewatering, Excluding Backfilling, Etc. Com- Plete. Providing And Supplyin Gi Pipes And Special Of Following Class And Dia In Proper Position Grade And Alignment As Directed Including Conveyance To Site Of Work Cost Of Jointing Material Labour Giving Satisfactory Hydraulic Testing Including Paying Eil Inspecting Charges Etc Complete A80mm Dia M 8.64Kg/M B50mm Dia M 5.16Kg/M C65mm Dia M 6.63Kg/M Lowering Laying And Jointing Gi Pipes And Specials Of Follwong Class And Diameter Including Conveyance From Stores To Site Of Works All Labour Giving Satisfactory Hydraulic Test Etc Complete Either Underground Or In Vertical Position As Directed By Engineer In Charge A80mm Dia M 107.00+10% B50mm Dia M 65.00+10% C65mm Dia M95.00+10% Providing And Laying In Situ, Following Grades Of C.C. Of Trap /Granite / Quartzite / Gneiss Metal For Foundation And Bedding Including Dewatering, Formwork, Compacting And Curing, Finishing, Etc. Complete. Item No.7C-Providing And Testing Varnished Plank 20 Mm Thick Fixed Towall Cr On Provided Pannel Board For Fitting Mseb Connection With Necessary Materials Supports Etc. Complete. Providing And Supplying In Standard Lengths Polyethelene Pipes, Confirming To Is 4984 /14151 / 12786 / 13488 With Nesessary Jointing Material Like Mechanical Connector I. E. Thread / Insert Joint / Quick Release Coupler Joint /Compression Fitting Joint Or Flanged Joint Excluding Coupler/ Specials, Including Transportation And Freight Charges, Inspection Charges, Loading / Unloading Charges, Conveyance To The Departmental Stores & Stacking The Same In Closed Shade Duly Protecting From Sunrays & Rains, Excluding Gst Levied By Gi & Gom In All Respect Etc. Complete.As Per Is:4984-2016, The Pipes Upto 110 Mm Dia.Should Be Supplied In Coil Form Only.Hdfc Pe 100Dia 75Mm 8Kg/Sqcm Lowering, Laying And Jointing H. D. P. E./M. D. P. E. Pipes In Proper Position Including All Specials By Compression Fitting/Electrofusion And Butt Fusion Jointing Procedure As Per Relevent Is Code Complete With All Materials For Jointing Procedure Like Lectrofusion Machine, Electric Heater/ Butt Fusion Welding Machine With Hydraulic Jack, Top Loading Clamp Etc. And All Labours As Directed By Engineer In Charge Hdfc Pe 100Dia 75Mm 8Kg/Sqcm Providing And Supplying Isi Mark Ci D/F Reflux Valves Non-Return Valves Of Following Dia Including All Taxes Central And Local Railway Freight, Inspection Charges, Unloading From Railway Wagon, Loading Into Truck, Transportation Upto Departmental Stores, Unloading, Stacking Etc Complete 1 20Mm Dia Lowering Laying And Jointing In Position Cid/ F Reflux Valves, Butterfly Valves And Sluice Valves Including Cost Of All Labour, Jointing Material Including Nut Bolts And Giving Satisfactory Hydraulic Testing Etc Complete A 20Mm Dia Refilling The Trenches With Available Excavated Stuff With Soft Material First Over Pipeline And Then Hard Material In 15 Cm Layers With All Leads And Lifts Including Consolidation, Surcharging, Etc.Complete. Providing And Fixing In Position M.S. Air Valve Boxes Fabri- Cated With 2 Mm Thick M.S. Plate, 30 X 30 X 3 Mm Size M.S. Angle Frame, Concreting In M-150 For Fixing The Box In Position, Applying Two Coats Of Oil Paint, Painting Chainage, Locking Arrangement, Etc.Complete As Directed By Engineer-In-Charge. Sub Estimate No 4 Designing Aesthetically And Constructing Rcc Ground Service Reservoirs/ Rcc Sumps In M-300 Mix Of Required Capacity Including Excavation In All Types Of Strata, Foundation Concrete, Container Walls, Bottom Slab Top Rcc Roof Slab/ Or Dome, 20 Mm Thick Cement Plaster With Water Profing Compound In Cm 1:3 Proportion, To Inside Face Of The Container, Including Refilling And Disposing Of Surplus Stuff Within Lead Of 50 M, All Labour And Material Charges For Laying And Jointing Of Pipe Assembly For Inlet, Outlet Washout, Over Flow And Bye-Pass Arrangement Consisting Of C.I./ M.S.D / F. Pipes Specials And Valves Of Given Disameters, Providing And Fixing Accessories Such As M.S. Ladder Inside And Outside, C.I. Manhole Frame And Cover, Water Top Slab, B.B. Masonry Chamber For All Valves, Ventilating Shafts, Including Giving Satisfactory Hydraulic Test And Water Tightness Test As Per Is Code And Providing Three Coat Of Cement Paints To All Expose Surface Of Structure Including Roof Surface Etc. Complete As Per Design Data, Criteria, Obligatory Requirments And Detailed Specifications. 3Entire Structure Shall Be In M-300 Only 4The Scope Of Pipe Assembly Work Shall Be Up To 5M Beyond Outside Face Of The Wall Cost Of Pipes Valves And Specials Is Not Included In The Rate Bu Labour Cost For Laying And Jointing Is Inclued 975%Part Rate Shall Be Payable For Reinforcement Concrete And Plastering Item Of All Types Of Gsr And Sumps Till Satisfactory Hydraulic Testing For Water Tightness Test If Given Cap 19000 Lit Item No.2- Providing Isi Mark G.I. Pipes Of Following Class And Dia Including All Local And Central Taxes, Octroi, Inspection Charges Etc Complete 80Mm Dia Gi 8.64Kg/M Item No.3-Providing Double Flanged Sluice Valve Confirming For Is-2906/14846 Including Worn Gear Arrangements As Per Test Pressure Stainless Steel Spindle, Caps Including All Taxes Transportation Etc.Complete. 80 Mm Dia Sluice Valve Pn-1 Sub Estimate No 5 Distribution System Excavation For Foundation / Pipe Trenches In Earth, Soils Of All Types, Sand, Gravel And Soft Murum, Including Removing The Excavated Material Upto A Distance Of 50 Metres And Lifts As Below, Stacking And Spreading As Directed, Normal Dewatering, Preparing The Bed For Foundation And Excluding Backfilling, Etc. Complete.. Excavation For Foundation / Pipe Trenches In Hard Rock By Controlled Blasting, Including Trimming And Levelling The Bed By Chiselling Where Necessary And Removing The Excavated Material And Stacking It In Measurable Heaps Within A Distance Of 50 Metres From The Area And Lifts As Below, Normal Dewatering, Excluding Backfilling, Etc. Com- Plete. Providing And Supplyin Gi Pipes And Special Of Following Class And Dia In Proper Position Grade And Alignment As Directed Including Conveyance To Site Of Work Cost Of Jointing Material Labour Giving Satisfactory Hydraulic Testing Including Paying Eil Inspecting Charges Etc Complete A80mm Dia M 8.64Kg/M B50mm Dia M 5.16Kg/M C65mm Dia M 6.63Kg/M Lowering Laying And Jointing Gi Pipes And Specials Of Follwong Class And Diameter Including Conveyance From Stores To Site Of Works All Labour Giving Satisfactory Hydraulic Test Etc Complete Either Underground Or In Vertical Position As Directed By Engineer In Charge A80mm Dia M 107.00+10% B50mm Dia M 65.00+10% C65mm Dia M95.00+10% Item No.1 -Providing & Supplying In Standard Lengths Polyethelene Pipes, Conforming To Is 4984/14151/12786/ 13488 With Necessary Jointing Material Like Mechanical Connector I.E.Thread/ Insert Joint/ Quick Release Coupler Joint, Including All Local & Central Taxes, Transportation And Freight Charges Inspection Charges, Loading/Unloading Charges, Conveyance To The Departmental Stores/ Site & Stacking The Same In Closed Shade Duely Protecting From Sunrays & Rains, Etc. 90Mm Dia Hdpe Pipe Pe - 100 - 6 Kg/Cm2 75 Mm Dia Hdpe Pipe Pe - 100 - 6 Kg/Cm2 63 Mm Dia Hdpe Pipe Pe - 100 - 6 Kg/Cm2 Item No.5- Lowering Laying & Jointing H.D.P.E. Pipe By Heating To The Ends Of Pipe With The Help Of Tefflon Coated Electrimirror/Heater To The Required Temparature & Then Pressing The End Together Against Each Other To Form A Monolithic & Leak Proof Joint By Thermosetting Process. The Pressing May Be Required To Be Done With Jack/Hydraulicjack/Vutt Fusion Machine Etc. Complete. With All Maerial, Labours As Directed By Engineer In Charge Including Given Satisfacory Hydraulic Test. 90Mm Dia Hdpe Pipe Pe - 100 - 6 Kg/Cm2 75Mm Dia Hdpe Pipe Pe100 - 6 Kg/Cm2 63 Mm Dia Hdpe Pipe Pe100 - 6 Kg/Cm2 Providing And Laying In Situ 1:2:4 M-150 Grade Of Cc Of Trap/Granite/Quartzite/Gniess Metel For Foundation An Bedingincluding Dewatering From Work Compating And Curing Finishing Etc Complete Providing And Supplying Isi Mark Ci D/F Reflux Valves Non-Return Valves Of Following Dia Including All Taxes Central And Local Railway Freight, Inspection Charges, Unloading From Railway Wagon, Loading Into Truck, Transportation Upto Departmental Stores, Unloading, Stacking Etc Complete Asluice Value I80mm Ii65mm Iii50mm Dia Lowering, Laying And Jointing In Position Following C.I.D./F. Sluice Valve Including Cost Of All Labour Jointing Material, Including Nut Bolts And Giving Satisfactory Hydraulic Testing Etc. Complete. Asluice Value I80mm 1580.00+176.00+10% Ii65mm 1137.00+127.00+10% Iii50mm 757.00+85.00+10% Refilling The Trenches With Available Excavated Stuff With Soft Material First Over Pipeline And Then Hard Material In 15 Cm Layers With All Leads And Lifts Including Consolidation, Surcharging, Etc.Complete. Provision For Msedcl Charges in Chiplun - Maharashtra has been published.
The last date of this tender is 22/06/2021, work value is  0 (Refer Doc) INR, EMD is  0 (Refer Doc) INR and tender document fees is  500 INR
For more details call us on +91 92760 83333 for bidding support this tender, GeM, vendor registration (if any) and tender BOQ documents.