Notice Inviting Tender (NIT) by the Corporations And Associations And Others Of Uttar Pradesh for Loading, Unloading And Safe Carriage Of Materials From Store Centre, Gorakhpur To Je Dump Store And Je Dump Store To Work Site With Proper Stacking 11Kv Xlpe 3X120 Sq Mm. St Pole 11 Mtr. Long 11 Kv Dropper Angle 11 Kv Top Channel Stay Complete 11 Kv T-Off Channel With Support 11 Kv Disc Insulator With Fitting 11 Kv Cable Jointing Kit 3X120 Sq.Mm. 11 Kv Cable Jointing Kit For 11 Kv Abc 3X120+100 Sq.Mm. 11 Kv Abc Cable 3X120+100 Sq.Mm. Lt Abc Cable 3X120+1X95+1X16 Sq.Mm. Earthing Complete Single Phase Electronic Meter Three Phase Electronic Meter Supply Of Following Material/Fitting Complete In All Respect :- Nuts & Bolts Of Different Size Holding Clamps Gi Pipe 6 Inch Dia Distribution Box With Clamp Distribution Box Shall Be Made From 20 Swg Crca Sheet By Deep Drown Method With Powder Coating & Size Of Box Shall Be 418 Mm X 300Mm X 120 Mm Roof Of The Box Shall Be Tapered On Both Sides To Drain The Rain Water Dead End Clamp With I Hook Insulated For Lt Abc Cable 3X120+1X95+1X16 Sq.Mm. Suspension Clamp With I Hook Insulated For Lt Abc Cable 3X120+1X95+1X16 Sq.Mm. Aluminium Xlpe Cable 1X35 For Energizing Distribution Box Lt Insulated Piercing Connector For Line To Line Jumpering In Case Of Tapping Lt Clamp For Stp Pole With Nuts & Bolts Lt Cable 2X6 Sq.Mm. Armoured Lt Cable 4X16 Sq.Mm. Armoured Shackle Insulator The Excavation Of 2 Nos. Foundation Pit Of Size 750Mmx450mm And Having Depth Of 1/6Th Of The Full Length Of The Pole. Fabrication & Erection Of Double Pole With Fixing Of Necessary Clamps & Accessories Top Channel, Dropper Angle Etc. As Per Required. All Required Materials Such As Holding Clamp/Stp Clamp, Nuts & Bolts Off Size Etc Will Be Provided By The Contractor. Grouting Of Pole In Cc 1:4:8 Cement, Sand & 40 Mm Brick Ballast, Grouting Will Be Done In The Block Of Size 450X450 Mm X Depth Upto Ground Level And Backfilling Of Pits With Mud Completely And Leveling Etc Material Provided By Contractor. Making Plinth Around Pole Height 300 Mm Above Ground Level With Top 100 Mm Is Kept Tapered So That No Rainwater Gets Accumulated On The Top. All Work Will Be Done As Per Respo Norms & Relevent Is Specification. The Excavation Of Foundation Pit Of Size 750Mmx450mm And Having Depth Of 1/6Th Of The Full Length Of The Pole. Fabrication & Erection Of St 11 Mtr. Long Pole With Fixing Of Necessary Clamps & Accessories As Per Required. All Required Materials Such As Holding Clamp/Stp/Lt Clamp, Lt Shackle Insulator, Nuts & Bolts Off Size Etc Will Be Provided By The Contractor. Grouting Of Pole In Cc 1:4:8 Cement, Sand & 40 Mm Brick Ballast, Grouting Will Be Done In The Block Of Size 450X450 Mm X Depth Upto Ground Level And Backfilling Of Pits With Mud Completely And Leveling Etc Material Provided By Contractor. In Case Of St Pole Making Plinth Around Pole Height 300 Mm Above Ground Level With Top 100 Mm Is Kept Tapered So That No Rainwater Gets Accumulated On The Top. All Work Will Be Done As Per Respo Norms & Relevent Is Specification. Erection And Grouting Of Stay In Cc Ratio 1:4:8 Of Cement, Sand And Stone Ballast Including Cost Of Grouting Material With Nozelling And Binding Of Stay Wire Complete Work Painting Of Pole With Aluminium Paint & Red Oxide Paint Provided By Contractor Earthing Of St Pole By Ms Earthing Rod & 6 Swg Earthing Wire As Per Respo Norms. Laying, Stringing, Sagging, Binding And Jumpering Of Abc 3X120+100 Sq.Mm. Cable Of 11 Kv Line With Fixing Of Required Accesiories Laying, Stringing, Sagging, Binding And Jumpering Of Abc 3X120+1X95+1X16 Sq.Mm. Cable Of Lt Line With Fixing Of Distribution Box With Clamp, Insulated Dead End Clamp With I Hook, Suspension Clamp With I Hookinsulated, Lt Insulated Piercing Connector, Xlpe 1X35 Sq.Mm. Al. Cable For Enerzing Db. Laying And Dressing Of Under Ground 11 Kv Xlpe 3X120 Sq Mm By Horizontal Drilling Method As Per Respo Norms. The Depth Of Horizontal Drilling Shall Be Between 2 To 3 Meters Or As Per Site Required. Errection Of Cable Jointing Kit & Hoisting Of Cable On Double Pole Using G.I. Pipe 4Dia 3 Mtr. Long G.I. Pipe 4 Dia And Other Necessary Materials Excluding 11 Kv Xlpe Cable 3X120 Mm² Cable Provided By Contractor Errection Of 11 Kv Abc 3X120+100 Sq.Mm.Cable Jointing Kit Preparing The Single Phase Electronic Meter By Fixing Plastic/Hologram Seals And Entering Meter Data On Meter Register And Then Marking The Lab Meter No. On Meter Cover With Permanent Marker Pen. After That Replacement/Installation Of Single Phase Electronic Meters On Connections At The Outside The Main Gate Of Permises Of The Consumer Including The Work Of Sealing The Meter And Filling Of Sealing Certificate Properly And Handing Over Copy Of Sealing Certificate To Consumer And Concerned Division/Subdivision On Same Day. Preparing The Three Phase Electronic Meter By Fixing Plastic/Hologram Seals And Entering Meter Data On Meter Register And Then Marking The Lab Meter No. On Meter Cover With Permanent Marker Pen. After That Replacement/Installation Of Three Phase Electronic Meters On Connections At The Outside The Main Gate Of Permises Of The Consumer Including The Work Of Sealing The Meter And Filling Of Sealing Certificate Properly And Handing Over Copy Of Sealing Certificate To Consumer And Concerned Division/Subdivision On Same Day. Disconnection And Re-Connection Of Consumer Cable Of Complete Lt Line Single/Three Phase Dismantling Of Following Line Materials And Safe Loading, Unloading And Carraige Of Dismantled Material From Work Site To Departmental Store Nuts & Bolts Of Different Size Holding Clamps in Varanasi - Uttar Pradesh has been published.
The last date of this tender is 14/05/2021, work value is  0 (Refer Doc) INR, EMD is  7500 INR and tender document fees is  1180 INR
For more details call us on +91 92760 83333 for bidding support this tender, GeM, vendor registration (if any) and tender BOQ documents.

Tender Document

Related Information

Location

Varanasi - Uttar Pradesh ( IN )

Ownership

Corporations And Associations And Others Of Uttar Pradesh

Sector

Power

Important Dates

Published on

01 May, 2021

Submission Date

13 May, 2021

Opening Date

14 May, 2021

Key Values

Work Value

Refer Doc

EMD

7.5 Thousand

Document Fee

1.1 Thousand
Tender Document Liaison Service Connect with us