Notice Inviting Tender (NIT) by the State Government Of Madhya Pradesh for Procurement Of Filter Bags I Size- Length: 88 2235 Mm, I.D.: 147.5 Mm, Od:152Mm Ii Fabric Material : Nomex 100% Aromatic Polyamide Iii Design Pressure: 6-7 Kg/Cm2, Iv Vacuum : 760 Mm Hg V Temp. :220 º C, Vidensity :550Gsm Bag Filter Cage, Material: Ss-304 Suitable For The Bags Of 88” Long Blow Pipe With Nozzles, Material: Ss-304 Each Set Will Comprise Of 12 Nos Blow Pipes Of Different Sizes. Pulse Jet Valve With Pilot. Make: Asco/Equivalent, Air/Inert Gas :0-11 Bar, Volt 240/50Hz Pipe Size 1/8” Main Door Gasket For Bag Filter Separators, Material: Synthetic Rubber. D.P. Arrangement Manual Valve 20 Nb Material: Gun Metal Check Valve 20 Nb Differential Pressure Switch. Pressure Gauge Range 0-10Kg/Cm2 Wire Breaded Hose With Clamps 40 Nb Material: S.S. Corrugated Wire Breaded As Per Mfg Standard Wire 48X0.3 15 Mtr, Clamps :48 No’S Transfer Hopper Top/ Bottom Gate Complete Swing Gate Assembly For 18” Transfer Hopper, Material- Body : Ms To Is:2062 Material - Disc : Ms To Is 2062, Seat: Alloy Cast Steel Hardness 250 To 300 Bhn Along With Pneumatic Actuators And Limit Switches Fluidizing Tiles 12”X10” Material – Blue Fused Alumina Al2o3 Content 82% Type - Porous Tiles Champers Cut, Bulk Density– 2.3 Gm/Cc Max. Porosity - 30% To 40%, Max. Used Temp - 9000C Vent Valve Assembly 2 ½”- 3 Way Valves Complete Assembly With Actuator Material: Casing-Alloy Cast Iron – Hardness 180-200 Bhn Valve Seat & Disc- High Chrome/Steel Ceramic Seating Face 2 ½”- 2 Way Valves Complete Assembly With Actuator Material: Casing-Alloy Cast Iron – Hardness 180-200 Bhn Valve Seat & Disc- High Chrome/Steel Ceramic Seating Face Surge Hopper Single Stone With Frame. Stone Material: Blue Fused Alumina Al2o3 Content 82% Type - Porous Tiles Champers Cut, Bulk Density – 2.3 Gm/Cc Max. Porosity - 30% To 40%, Max. Used Temp - 9000C Mounted In Frame /Plenum –Ss-304 04 Stones -04 Tiles With Frame Stone Material: Blue Fused Alumina Al2o3 Content 82% Mounted In Frame /Plenum –Ss-304 02 Stones -02 Tiles With Frame Stone Material: Blue Fused Alumina Al2o3 Content 82% Mounted In Frame /Plenum –Ss-304 Safety Valve Complete Assembly For Surge Hopper As Per Ucc Design. Nuva Diffuser Feeder Complete Assembly Specifications Of Main Parts Of Assembly: Body : G-3 Bhn 180, Gate Seat & Disc: Durite 350 Bhn, Diffuser Feeder Shaft: Steel, Seat Fixing Bolt : Ms, Compression Spring: Ss Cold Drawn, Air Cylinder Size : 6 Bore× 7 Stroke, Spring For Cylinder : Spring Steel, Diffuser Tile : Porous Tile Make: Grindwel Norton Preferably / Equivalent, Diffuser Plenum : S.S. 304 Body Fluidizing Tiles Fluidizing Pad 4 Wide × 48 Long, With Imported Ss Element For Nuva Feeder Pneumatic Ball Valve 40 Nb 25 Nb 3 Way Single Quail Solenoid Valve 3 Way Single Coil Solenoid Valve Make Asco /Rotex Preferably/Equivalent Spring Loaded Check Valve/ Diaphragm Valve 40 Nb 25 Nb Hose And Connector Hose : Wire Braided Hose Of 6Mm, 8Mm, 10Mm, 12 Mm : 20 Mtr Each Brass Hose Connectors 08 Nb, 10 Nb & 12Nb With Brass Hose Nipple 8Mmx8mm, 6Mmx8 Mm, 15Mmx08mm, & 15Mmx10mm, 25 Each Fittings Pressure Feeder Outlet Tee, Material : Durite / Equivalent Hardness 450Bhn Bend, 90O 300 Nb Material : : Durite/ Equivalent Hardness 450Bhn 10” Tersg Valve Complete Assly Moc: Body : G-4 Or Equivalent Hardness 200-230 Bhn, Slide : Alloy Cast Steel Hardness 200-230 Bhn, Shaft : En8, Bush : Bronze, Seal Strip : Nitrile Rubber, Band Clamp : Ss 410/ 416, Cylinder Bracket: M.S., Cylinder : 4” Bore X 6” Stroke Standard, Fixing Bolt : Carbon Steel Butter Fly Valve With Actuator 300 Nb Air Washer Assembly: Tank Design Pressure 07 Kg/Cm2, Test Pressure 14 Kg/Cm2, Body With Flange And Support & Top Cover : M.S. I.S:2062, Gauge Glass With Isolation& Drain Gauge Glass Cock ½” Bspt, Screwed Of Gun Metal, Filling Funnel With Top Flange : M.S. I.S:2062, Inside And Outside Surface And All Ms Fitting To Be Galvanized Gi Pipes& Fittings Gi Nipple Size 15 Mm Gi Nipple Size 20 Mm Gi Nipple Size 25 Mm Gi Union Size 15 Mm Gi Union Size 20 Mm Gi Union Size 25 Mm For Re Commissioning Of Stand By Stream Of Fly Ash Disposal System Of Unit No 1 To 4 For Ahp I And Ii Sgtps in Birsinghpur - Madhya Pradesh has been published.
The last date of this tender is 31/12/2020, work value is  17934228 INR, EMD is  250000 INR and tender document fees is  6534 INR
For more details call us on +91 92760 83333 for bidding support this tender, GeM, vendor registration (if any) and tender BOQ documents.

Tender Document

Related Information

Location

Birsinghpur - Madhya Pradesh ( IN )

Ownership

State Government Of Madhya Pradesh

Sector

Power

Important Dates

Published on

28 Nov, 2020

Submission Date

26 Dec, 2020

Opening Date

31 Dec, 2020

Key Values

Work Value

1.79 Crore

EMD

2.50 Lacs

Document Fee

6.5 Thousand
Tender Document Liaison Service Connect with us