Notice Inviting Tender (NIT) by the State Government Of Maharashtra for Supply Of Sport Material- 7 Station Multy Gym Unit Chest Press Cum Shoulder Press - 75 Kg Latpull Down-75 Kg Single Hand Pulley-50 Kg Incline Leg Press-90 Kg Leg Raiser With Dipping Abdomen Board Twister 6 Station Multy Gym Unit Chest Press Cum Shoulder Press - 75 Kg Latpull Down-75 Kg Single Hand Pulley - 50 Kg Leg Curl & Leg Extension - 70 Kg Leg Raiser With Dipping Abdomen Board 5 Station Multy Gym Unit Chest Press Cum Shoulder Press - 75 Kg Latpull Down-75 Kg Leg Curl & Leg Extension - 70 Kg Leg Raiser With Dipping Twister Wrist Conditioner Preacher Curl Machine Lat Pull Down Rowing Pulley Chest Press Multi Functional Trainer Pec Fly With Rear Delt Shoulder Press Standing Calf Machine Incline Leg Press Leg Extension And Leg Curl Combo Hack Machine Multi Hip Abdomen Crunch Assisted Chin-Up Hyper Extension Bent Over Rower T Bar Bench Press Bench Incline Bench Decline Bench Adjustable Bench Dual Axis Incline Press Dual Axis Bench Press Dual Axis Decline Press 45 Degree Leg Press Abdomen Bench Vertical Knee Raiser Twister 3-Dimensional Smith Machine Pushup Stand Plain Bench Smith Bench Rack For 20 Dumbells With Bar Rack Arc Dumbell Rack Weight Plate Tree Rack Abdomen Board With Ladder Double Twister Seated Calf Bench Shoulder Press Free Weight: Dimensions: L X W X H 1300X1260x1350mm. Main Frame: ?114X3 Mm Thick M.S Pipe And Subordinate Tube Is Of ?88X3.0 Large Thickness M.S Pipe. Handle: Is Made Of ?88 X3 Mm Thick Pipe And ?25 Mm Round M.S Bright Bar In Bending Design. All Remaining Frame Is Made By ?88X3mm Thick Ms Pipe. Weight Plates: Rubberized Moulding Round Weight Plates Are Used. Weight Plates Holder With Spring Lock And Spare Weights Holder: Is Made By Hard Chrome Plated Mild Steel ?48 Dia Pipe Open Front Covered With Half Round Cap And Holder End Is Covered With Heavy Quality Rubber Ring Of Od-68 Mm And Id-48 Mm With 10Mm Wall Thickness For Free Weight Noiseless Operations. Bearing: Lubricated High Grade6305 2Rssteel Ball Bearing. Base Plate: Is Od166, Id 116, And 6 Mm Thick. Pins: Are Made Up Of M.S Bright Bar. Bearing Bushes: ?75Mm Od Seamless Pipe. Weight Plate Mounting Pipe Is Of 048 Mm Ms Pipe. Padding And Cushion; Seats And Pads Are Made Up Of 3 Mm Thick M.S Plate With 2 Inches Of High-Density Foam And Finally Covered With Completely Stitched Heavy Vinyl Cover In Any Color. Seat Frame: Made Up Of Hard Chrome Plated Mild Steel 048 Dia Round Pipe. Hardware: All Hardwares Uses Button Heads Bolts And Nuts Made Up Of High Tensile Steel. Hand Grips: Hand Grips Is Used On Handles Wherever Necessary Made Up Of High-Quality Rubber And Handle Ends Are Covered With Aluminum/Pp/Nylon Caps With Grub Screw For Long Endurance. Spring Knob: Mechanism Is Used For Seat Height Adjustment. Closing Caps: Are Of Pp/Nylon/Hdpe Material. Laser Cutting: Profiles Of 6Mm And 4Mm Thick M.S Sheet Are Used For Connecting Subordinates With Each Other. Rubber: Safety Base Pads: Anti-Skid Safety Base Pads Made Up Superior Rubber To Prevent Slippery And Damage To Floor. Heavy Duty 20Mm Thick Rubber Pads Are Placed For Resting Handles For Noise Less Operations. Powders Coating: All Components Are Chemically Treated To Seal Exterior And Interior Surfaces Against Corrosion. The Components Are Electro Statically Powder Coated At Minimum 80-100-Micron Thickness To Make It Resistant To Scratch, Corrosion And Humidity In Dual Color Combination. Safety Instructions And Exercise Chart On Machine - Start & Finish Position Chart Stick On 5Mmthick Mild Steel Plate. Front Pull Down Free Weight: Dimensions: L X W X H 1230X1120x1860mm. Main Frame: ?114 X3 Mm Thick M.S Pipe And Subordinate Tube Is Of ?88X3.0 Large Thickness M.S Pipe. Handle Frame Shall Be Made Using Bending Design. Handle: Is Made Of ?88X3 Mm Thick Pipe And ?25 Mm Round M.S Bright Bar In Bending. All Remaining Frame Is Made By 088 X3mm Thick Ms Pipe. Weight Plates: Rubberized Moulding Round Weight Plates Are Used. Weight Plates Holder With Spring Lock And Spare Weights Holder: Is Made By Hard Chrome Plated Mild Steel ?48 Dia Pipe Open Front Covered With Half Round Cap And Holder End Is Covered With Heavy Quality Rubber Ring Of Od-68 Mm And Id-48 Mm With 10Mm Wall Thickness For Free Weight Noiseless Operations. Bearing: Lubricated High Grade 6305 2Rs‘ Steel Ball Bearing. Base Plate Base Plate Is Od 166, Id 116, And 6 Mm Thick. Pins: Made Up Of M.S Bright Bar. Bearing Bushes:- ?75Mm Od Seamless Pipe. Padding And Cushion; Seats And Pads Are Made Up Of 3 Mm Thick M.S Plate With 2 Inches Of High-Density Foam And Finally Covered With Completely Stitched Heavy Vinyl Cover In Any Color. Foam Roller; Foam Roller Made Up Of High Density Composed Foam And Covered With Stitched Heavy Vinyl Cover, And Their Ends Are Covered With Aluminum Or Mild Steel Chrome Plated Caps And M8 Allen Bolt. Hardware: All Hardwares Uses Button Heads Bolts And Nuts Made Up Of High Tensile Steel. Hand Grips: Hand Grips Is Used On Handles Wherever Necessary Made Up Of High-Quality Rubber And Handle Ends Are Covered With Aluminum/Pp/Nylon Caps With Grub Screw For Long Endurance. Spring Knob: Mechanism Is Used For Seat Height Adjustment. Closing Caps: All Open Ends Should Close Using Closing Caps Of Pp/Nylon/Hdpe Material. Laser Cutting: Laser Cutting Profiles Of 6Mm And 4Mm Thick M. S Sheet Are Used For Connecting Subordinates With Each Other. Rubber: Safety Base Pads: Anti-Skid Safety Base Pads Made Up Superior Rubber To Prevent Slippery And Damage To Floor. Heavy Duty 20Mm Thick Rubber Pads Are Placed For Resting Handles For Noise Less Operations. Powders Coating: All Components Are Chemically Treated To Seal Exterior And Interior Surfaces Against Corrosion. The Components Are Electro Statically Powder Coated At Minimum 80-100-Micron Thickness To Make It Resistant To Scratch, Corrosion And Humidity In Dual Color Combination. Safety Instructions And Exercise Chart On Machine - Start & Finish Position Chart Stick On 5Mm Thick Mild Steel Plate. Seated Dip Free Weight: Dimensions: L X W X H 1750X1010x890mm. Main Frame :?114 X3mm Thick M.S Pipe Made In Bending Design And Subordinate Tube Is Of ?88X3mm Thickness M.S Pipe. Handle And Plate Holder Frame, Bottom Frame And Front Are Made In Bending Design By Using ?88X3mm Thickness M.S Pipe. Handle: Is Made Of ?88 X3 Mm Thick Pipe And ?25 Mm Round M.S Bright Bar In Bending Design. Weight Plates Holder With Spring Lock And Spare Weights Holder: Is Made By Hard Chrome Plated Mild Steel ?48 Dia Pipe Open Front Covered With Half Round Cap And Holder End Is Covered With Heavy Quality Rubber Ring Of Od-68 Mm And Id-48 Mm Wall Thickness For Free Weight Noiseless Operations. Bearing: Lubricated High Grade 6305 2Rs Steel Ball Bearing. Base Plates Od 166, Id 116, And 6 Mm Thick And Od 130, 1077, 6Mm Thick M.S Round Laser Cut Profile. Pins: Are Made Up Of M.S Bright Bar. Bearing Bushes: ?75Mm Od Seamless Pipe. Weight Plate Mounting Pipe Is Of ?48 Mm Ms Pipe. Weight Plates: Rubberized Moulding Round Weight Plates Are Used. Padding And Cushion; Seats And Pads Are Made Up Of 3 Mm Thick M.S Plate With 2 Inches Of High-Density Foam And Finally Covered With Completely Stitched Heavy Vinyl Cover In Any Color. Foam Roller; Foam Roller Made Up Of High Density Composed Foam And Covered With Stitched Heavy Vinyl Cover, And Their Ends Are Covered With Aluminum Or Mild Steel Chrome Plated Caps And M8 Allen Bolt. Hardware All Hardwares Uses Button Heads Bolts And Nuts Made Up Of High Tensile Steel. Hand Grips :Hand Grips Is Used On Handles Wherever Necessary Made Up Of High-Quality Rubber And Handle Ends Are Covered With Aluminum/Pp/Nylon Caps With Grub Screw For Long Endurance. Spring Knob: Mechanism Is Used For Seat Height Adjustment. Closing Caps: Aii Open Ends Should Close Using Closing Caps Of Pp/Nylon/Hdpe Material. Laser Cutting: Profiles Of 6Mm And 4Mm Thick .M.S Sheet Are Used For Connecting Subordinates With Each Other. Rubber: Safety Base Pads: Anti-Skid Safety Base Pads Made Up Superior Rubber To Prevent Slippery And Damage To Floor. Heavy Duty 20Mm Thick Rubber Pads Are Placed For Resting Handles For Noise Less Operations. Powders Coating: All Components Are Chemically Treated To Seal Exterior And Interior Surfaces Against Corrosion. The Components Are Electro Statically Powder Coated At Minimum 80-100-Micron Thickness To Make It Resistant To Scratch, Corrosion And Humidity In Dual Color Combination. Safety Instructions And Exercise Chart On Machine - Start & Finish Position Chart Stick On 5Mm Thick Mild Steel Plate. Preacher Curl Free Weight: Dimensions: Lx W X H 1210X1360x14b0mm. Main Frame:?88 X3 Mm Thick M.S Pipe And Subordinate Tube Is Of ?88X3mm Large Thickness M.S Pipe In Bending Design. Handle: Handle Is Made Of ?88 X3 Mm Thick M.S Pipe Duly Bending Design And ?25 Mm Round M.S Bright Bar. Weight Plates: Rubberized Moulding Round Weight Plates Are Used. Weight Plates Holder With Spring Lock And Spare Weights Holder: Is Made By Hard Chrome Plated Mild Steel ?48 Dia Pipe Open Front Covered With Half Round Cap And Holder End Is Covered With Heavy Quality Rubber Ring Qd-68 Mm And Id-48 Mm With 10Mm Wall Thickness For Free Weight Noiseless Operations. Bearing: Lubricated High Grade 6305 2Rs Steel Bail Bearing. Base Plate: Base Plate Is Od130, Id 90, And 6 Mm Thick. Pins: Are Made Up Of M.S Bright Bar. Bearing Bushes: ?75Mm Od Seamless Pipe. Padding And Cushion; Seats And Pads Are Made Up Of 3 Mm Thick M.S Plate With 2 Inches Of High-Density Foam And Finally Covered With Completely Stitched Heavy Vinyl Cover In Any Color. Hardware : All Hardwares Uses Button Heads Bolts And Nuts Made Up Of High Tensile Steel. Cables; 6Mm Thick Nylon Coated Cables With Aluminum Crimping At One End To Attach And Hold Handle. One Additional Cable Set To Be Supplied. Hand Grips: Hand Grips Is Used On Handles Wherever Necessary Made Up Of High-Quality Rubber And Handle Ends Are Covered With Aluminum/Pp/Nylon Caps With Grub Screw For Long Endurance. Spring Knob: Mechanism Is Used For Seat Height Adjustment. Closing Caps : All Open Ends Should Dose Using Closing Caps Of Pp/Nylon/Hdpe Material. Laser Cutting: Profiles Of 8Mm, 6Mm And 4Mm Thick M. S Sheet Are Used For Connecting Subordinates With Each Other. Rubber: Safety Base Pads: Anti-Skid Safety Base Pads Made Up Superior Rubber To Prevent Slippery And Damage To Floor. Heavy Duty 20Mm Thick Rubber Pads Are Placed For Resting Handles For Noise Less Operations. Powders Coating: All Components Are Chemically Treated To Seal Exterior And Interior Surfaces Against Corrosion. The Components Are Electro Statically Powder Coated At Minimum 80-100-Micron Thickness To Make It Resistant To Scratch, Corrosion And Humidity In Dual Color Combination. Safety Instructions And Exercise Chart On Machine - Start & Finish Position Chart Stick On 5Mm Thick Mild Steel Plate Row Free Weight: Dimensions: L X W X H 1375X1570x1530mm. Main Frame: ?114 X3 Mm Thick M.S Pipe And Subordinate Tube Is Of ?88X3mm Large Thickness M.S Pipe. Handle Main And Base Frame, Bottom Frame Are Made In Bending Design Using Of ?88X3mm Thick M.S Pipe. Handle: Is Made Of ?88 X3 Mm Thick Pipe Bending Design And ?25 Mm Round M.S Bright Bar. All Remaining Frame Is Made By ? 88 X3mm Thick Ms Pipe. Weight Plates: Rubberized Moulding Round Weight Plates Are Used. Weight Plates Holder With Spring Lock And Spare Weights Holder: Is Made By Hard Chrome Plated Mild Steel ?48 Dia Pipe Open Front Covered With Half Round Cap And Holder End Is Covered With Heavy Quality Rubber Ring Of Od-68 Mm And Id-48 Mm With 10Mm Wall Thickness For Free Weight Noiseless Operations. Bearing: Lubricated High Grade 6305 ^Rs Steel Ball Bearing. Base Plate :Is 00166, 10 116, And 6 Mm Thick. Pins: Are Made Up Of M.S Bright Bar. Bearing Bushes : ? 75Mm Od Seamless Pipe. Weight Plate Mounting Pipe Is Of 048 Mm Ms Pipe. Padding And Cushion; Seats And Pads Are Made Up Of 3 Mm Thick M.S Plate With 2 Inches Of High-Density Foam And Finally Covered With Completely Stitched Heavy Vinyl Cover In Any Color. Hardware : All Hardwares Uses Button Heads Bolts And Nuts Made Up Of High Tensile Steel. Hand Grips :Hand Grips Is Used On Handles Wherever Necessary Made Up Of High-Quality Rubber And Handle Ends Are Covered With Aluminum/Pp/Nylon Caps With Grub Screw For Long, Endurance. Spring Knob: Mechanism Is Used For Seat Height Adjustment. Closing Caps-.All Open Ends Should Close Using Closing Caps Of Pp/Nylon/Hdpe Material. Laser Cutting: Profiles Of 6Mm And 4Mm Thick .M.S Sheet Are Used For Connecting Subordinates With Each Other. Rubber: Safety Base Pads: Anti-Skid Safety Base Pads Made Up Superior Rubber To Prevent Slippery And Damage To Floor. Heavy Duty 20Mm Thick Rubber Pads Are Placed For Resting Handles For Noise Less Operations. Powders Coating: All Components Are Chemically Treated To Seal Exterior And Interior Surfaces Against Corrosion. The Components Are Electro Statically Powder Coated At Minimum 80-100-Micron Thickness To Make It Resistant To Scratch, Corrosion And Humidity In Dual Color Combination. Safety Instructions And Exercise Chart On Machine - Start & Finish Position Chart Stick On 5Mm Thick Mild Steel Plate. Calf Raise Free Weight: Dimensions: T X W X H 1470X735x92smm. Main Frame: ?114X3 Mm Thick M.S Pipe And Subordinate Tube Is Of ?88X3mm Large Thickness M.S Pipe. Bottom Frame, Seat Frame, Thighs Locking Frame Are Made In Bending Design ?88X3mm M.S. Pipe All Remaining Frame Is Made By ?88 X3mm Thickness M.S Pipe. Foot Rest: Foot Rest Is Made Using Heavy Duty 100 X 50 X 2.5Mm Thick Capsule Tube. Weight Plates: Rubberized Moulding Round Weight Plates Are Used. Weight Plates Holder With Spring Lock And Spare Weights Holder, Is Made By Hard Chrome Plated Mild Steel ?48 Dia Pipe Open Front Covered With Half Round Cap And Holder End Is Covered With Heavy Quality Rubber Ring Of Od-68 Mm And Id-48 Mm With 10Mm Wall Thickness For Free Weight Noiseless Operations. Bearing: Lubricated High Grade 6305 ‘2Rs1 Steel Ball Bearing. Base Plate : Is Od 166, Id 116, And 6 Mm Thick. Pins: Are Made Up Of M.S Bright Bar. Bearing Bushes : ? 75Mm Od Seamless Pipe. Padding And Cushion; Seats And Pads Are Made Up Of 3 Mm Thick M.S Plate With 2 Inches Of High-Density Foam And Finally Covered With Completely Stitched Heavy Vinyl Cover In Any Color. Hardware All Hardwares Uses Button Heads Bolts And Nuts Made Up Of High Tensile Steel. Hand Grips :Hand Grips Is Used On Handles Wherever Necessary Made Up Of High-Quality Rubber And Handle Ends Are Covered With Aluminum/Pp/Nylon Caps With Grub Screw For Long Endurance. Spring Knob: Mechanism Is Used For Seat Height Adjustment. Closing Caps: All Open Ends Should Close Using Closing Caps Of Pp/Nyion/Hdpe Material. Laser Cutting: Profiles Of 8 Mm 6Mm And 4Mm Thick .M.S Sheet Are Used For Connecting Subordinates With Each Other. Rubber: Safety Base Pads: Anti-Skid Safety Base Pads Made Up Superior Rubber To Prevent Slippery And Damage To Floor. Heavy Duty 20Mm Thick Rubber Pads Are Placed For Resting Handles For Noise Less Operations. Powders Coating: All Components Are Chemically Treated To Seat Exterior And Interior Surfaces Against Corrosion. The Components Are Electro Statically Powder Coated At Minimum 80-100-Micron Thickness To Make It Resistant To Scratch, Corrosion And Humidity In Dual Color Combination. Safety Instructions And Exercise Chart On Machine - Start & Finish Position Chart Stick On 5Mm Thick Mild Steel Plate. Kneeling Leg Curl Free Weight: Dimensions: L X W X H 1270X1430x1330mm. Main Frame:?114X3 Mm Thick M.S Pipe In Bending Design And Subordinate Tube Is Of ?88X3 Mm Large Thickness M.S Pipe. Plate Holder Frame, Front Abdomen Rest Frame, Knee Rest Frame And Leg Movement Frame Made In Bending Design Using 088X3mm M.S Pipe Handle: ?25 Mm Round M.S Bright Bar. Leg Movement Frame Made Of ?88 X3mm Thick Ms Pipe. All Remaining Frame Is Made By ?88 X3mm Thick Ms Pipe. Weight Plates: Rubberized Moulding Round Weight Plates Are Used. Weight Plates Holder With Spring Lock And Spare Weights Holder: Is Made By Hard Chrome Plated Mild Steel ?48 Dia Pipe Open Front Covered With Half Round Cap And Holder End Is Covered With Heavy Quality Rubber Ring Of Od-68 Mm And Id-48 Mm With 10Mm Wall Thickness For Free Weight Noiseless Operations. Bearing: Lubricated High Grade 6305 2Rs Steel Ball Bearing Bearing: Lubricated High Grade Zz Steel Ball Bearing. Base Plate :Is Od 166, Id 116, And 6 Mm Thick. Pins: Are Made Up Of M.S Bright Bar. Bearing Bushes : ? 75Mm Od Seamless Pipe. Padding And Cushion; Seats And Pads Are Made Up Of 3 Mm Thick M.S Plate With 2 Inches Of High-Density Foam And Finally Covered With Completely Stitched Heavy Vinyl Cover In Any Color. Foam Roller; Foam Roller Made Up Of High Density Composed Foam And Covered With Stitched Heavy Vinyl Cover, And Their Ends Are Covered With Aluminum Or Mild Steel Chrome Plated Caps And M8 Allen Bolt. Hardware :All Hardwares Uses Button Heads Bolts And Nuts Made Up Of High Tensile Steel. Hand Grips :Hand Grips Is Used On Handles Wherever Necessary Made Up Of High-Quality Rubber And Handle Ends Are Covered With Aluminum /Pp/Nylon Caps With Grub Screw For Long Endurance. Spring Knob: Mechanism Is Used For Seat Height Adjustment. Closing Caps: All Open Ends Should Close Using Closing Caps Of Pp/Nylon/Hdpe Material. Laser Cutting Profiles Of 8 Mm 6Mm And 4Mm Thick .M.S Sheet Are Used For Connecting Subordinates With Each Other. Rubber: Safety Base Pads: Anti-Skid Safety Base Pads Made Up Superior Rubber To Prevent Slippery And Damage To Floor. Heavy Duty 20Mm Thick Rubber Pads Are Placed For Resting Paddle Movement For Noise Less Operations. Powders Coating: All Components Are Chemically Treated To Seal Exterior And Interior Surfaces Against Corrosion. The Components Are Electro Statically Powder Coated At Minimum 80-100-Micron Thickness To Make It Resistant To Scratch, Corrosion And Humidity In Dual Color Combination. Safety Instructions And Exercise Chart On Machine - Start & Finish Position Chart Stick On 5Mm Thick Mild Steel Plate. Leg Extension Free Weight: Dimensions: L X W X H 1490X1500x1090mm. Main Frame:?114 X3 Mm Thick M.S Pipe In Bending Design And Subordinate Tube Is Of ?88X3mm Large Thickness M.S Pipe.00 Leg Movement Frame: Is Made Of ?88 *3 Mm And ?48 X3mm Thick Pipe Thick Pipe In Bending Design And ?25 Mm Round M.S Bright Bar. All Remaining Frame Is Made By 076 X3mm Thick Ms Pipe. Weight Plates: Rubberized Moulding Round Weight Plates Are Used. Weight Plates Holder With Spring Lock And Spare Weights Holder: Is Made By Hard Chrome Plated Mild Steel 048 Dia Pipe Open Front Covered With Half Round Cap And Holder End Is Covered With Heavy Quality Rubber Ring Of Od-68 Mm And Id*48 Mm With 10Mm Wall Thickness For Free Weight Noiseless Operations. Bearing: Lubricated High Grade 6305 2Rs Steel Ball Bearing Base Plate :Is Od 166, Id 116, And 6 Mm Thick. Pins: Are Made Up Of M.S Bright Bar. Bearing Bushes : ? 75Mm Od Seamless Pipe. Weight Plate Mounting Pipe Is Of ?48 Mm Ms Pipe. Padding And Cushion; Seats And Pads Are Made Up Of 3 Mm Thick M.S Plate With 2 Inches Of High-Density Foam And Finally Covered With Completely Stitched Heavy Vinyl Cover In Any Color. Foam Roller; Foam Roller Made Up Of High Density Composed Foam And Covered With Stitched Heavy Vinyl Cover, And Their Ends Are Covered With Aluminum Or Mild Steel Chrome Plated Caps And M8 Allen Bolt. Hardware: All Hardwares Uses Button Heads Bolts And Nuts Made Up Of High Tensile Steel. Spring Knob: Mechanism Is Used For Seat Height Adjustment. Closing Caps: All Open Ends Should Close Using Closing Caps Of Pp/Nylon/Hdpe Material. Laser Cutting: Profiles Of 8 Mm 6Mm And 4Mm Thick M.S Sheet Are Used For Connecting Subordinates With Each Other. Rubber: Safety Base Pads: Anti-Skid Safety Base Pads Made Up Superior Rubber To Prevent Slippery And Damage To Floor. Heavy Duty 20Mm Thick Rubber Pads Are Placed For Resting Paddle Movement For Noise Less Operations. Powders Coating: All Components Are Chemically Treated To Seal Exterior And Interior Surfaces Against Corrosion. The Components Are Electro Statically Powder Coated At Minimum 80-100-Micron Thickness To Make It Resistant To Scratch, Corrosion And Humidity In Dual Color Combination. Safety Instructions And Exercise Chart On Machine - Start & Finish Position Chart Stick On 5Mm Thick Mild Steel Plate. 45 Degree Leg Press Free Weight: Dimensions: L X W X H 2480X1240x1450mm. Main Frame:?114 X3 Mm Thick M.S Pipe And Subordinate Tube Is Of ?88X3mm Large Thickness M.S Pipe. Trolley Movement Main Frame Made In Bending Using ?114 X3 Mm Thick M.S Pipe And Bottom Frame In Bending Design Made By ?88X3mm Thickness M.S Pipe. Trolley: Trolley Made 80X40x2.5Mm Thick Capsule Tube. Trolley Guide Bar Made Up Of M.S 25 Od Solid Bright Bar Duly Hard Chrome Plated. Trolley Footrest Made Up Of 5Mm Thick Checkered Plate Duly Powder Coated Finally Covered 5Mm Thick Heavy-Duty Rubber Sheet. Trolley Holder And Safety Rod Is Made Up Of 25Mm Od Solid M.S Bright Bar. Back Rest Frame Should Be Height Adjustable Using Spring Knob Mechanism. Handle: Made Up Of 25Mm Od M.S Bright Bar In Bending Design. All Remaining Frame Is Made By ?88 X3mm Thick. Weight Plates: Rubberized Moulding Round Weight Plates Are Used. Weight Plates Holder With Spring Lock And Spare Weights Holder: Is Made By Hard Chrome Plated Mild Steel ?48 Dia Pipe Open Front Covered With Half Round Cap And Holder End Is Covered With Heavy Quality Rubber Ring Of Od-68 Mm And Id-48 Mm With 10Mm Wall Thickness For Free Weight Noiseless Operations. Bearing: Lubricated High-Grade Linear Steel Ball Bearing 25 Id Inner Diameter. Base Plate: Is Od 166, Id 116, And 6 Mm Thick. Pins: Are Made Up Of M.S Bright Bar. Bearing Bushes :65X65mm Mild Steel Square Bar. Padding And Cushion; Seats And Pads Are Made Up Of 3 Mm Thick M.S Plate With 2 Inches Of High-Density Foam And Finally Covered With Completely Stitched Heavy Vinyl Cover In Any Color. Hardware: All Hardwares Uses Button Heads Bolts And Nuts Made Up Of High Tensile Steel. Hand Grips :Hand Grips Is Used On Handles Wherever Necessary Made Up Of High-Quality Rubber And Handle Ends Are Covered With Aluminum/Pp/Nylon Caps With Grub Screw For Long Endurance. Spring Knob: Mechanism Is Used For Seat Height Adjustment. Closing Caps: All Open Ends Should Close Using Closing Caps Of Pp/Nylon/Hdpe Material, Laser Cutting-.Profiles Of 8 Mm 6Mm And 4Mm Thick M.S Sheet Are Used For Connecting Subordinates With Each Other; Rubber: Safety Base Pads: Anti-Skid Safety Base Pads Made Up Superior Rubber To Prevent Slippery And Damage To Floor. Powders Coating: All Components Are Chemically Treated To Seal Exterior And Interior Surfaces Against Corrosion. The Components Are Electro Statically Powder Coated At Minimum 80-100-Micron Thickness To Make It Resistant To Scratch, Corrosion And Humidity In Dual Color Combination. Safety Instructions And Exercise Chart On Machine - Start & Finish Position Chart Stick On 5Mm Thick Mild Steel Plate. Decline Chest Press Free Weight: Dimensions: L X W X H 1240X1400x1930mm, Main Frame: ?114 X3 Mm Thick M.S Pipe And Subordinate Tube Is Of ?88X3mm Large Thickness M.S Pipe. Top, Bottom, Back Rest And Handle Frame Should Be In Bending Design Is Made Of ?88 X 3 Mm Thick Pipe And Handle025 Mm Round M.S Bright Bar In Bending Design. Weight Plates: Rubberized Moulding Round Weight Plates Are Used. Weight Plates Holder With Spring Lock And Spare Weights Holder: Is Made By Hard Chrome Plated Mild Steel ?48 Dia Pipe Open Front Covered With Half Round Cap And Holder End Is Covered With Heavy Quality Rubber Ring Of Od-68 Mm And Id-48 Mm With 10Mm Wall Thickness For Free Weight Noiseless Operations. Bearing: Lubricated High Grade 6305 2Rs1 Steel Ball Bearing Base Plate: Is Od 166, Id 116, And 6 Mm Thick. Pins: Are Made Up Of M.S Bright Bar. Bearing Bushes: ? 75Mm Od Seamless Pipe. Padding And Cushion; Seats And Pads Are Made Up Of 3 Mm Thick M.S Plate With 2 Inches Of High-Density Foam And Finally Covered With Completely Stitched Heavy Vinyl Cover In Any Color. Hardware :All Hardwares Uses Button Heads Bolts And Nuts Made Up Of High Tensile Steel. Hand Grips :Hand Grips Is Used On Handles Wherever Necessary Made Up Of High-Quality Rubber And Handle Ends Are Covered With Aluminum/Pp/Nylon Caps With Grub Screw For Long Endurance. Spring Knob: Mechanism Is Used For Seat Height Adjustment. Closing Caps: Aii Open Ends Should Close Using Closing Caps Of Pp/Nylon/Hdpe Material. Laser Cutting; Profiles Of 8 Mm 6Mm And 4Mm Thick M.S Sheet Are Used For Connecting Subordinates With Each Other. Rubber: Safety Base Pads: Anti-Skid Safety Base Pads Made Up Superior Rubber To Prevent Slippery And Damage To Floor. Powders Coating: All Components Are Chemically Treated To Seal Exterior And Interior Surfaces Against Corrosion. The Components Are Electro Statically Powder Coated At Minimum 80-100-Micron Thickness To Make It Resistant To Scratch, Corrosion And Humidity In Dual Color Combination. Safety Instructions And Exercise Chart On Machine: Start & Finish Position Chart Stick On 5Mm Thick Mild Steel Plate. Abdominal Machine Free Weight: Dimensions: L X W X H 1210X132sx1640mm. Main Frame:?88 X3 Mm Thick M.S Pipe In Bending Design And Subordinate Tube Is Of ?60X3mm Thickness M.S Pipe. Back Rest Frame Made Up Of ?88 X 3 Mm Thick M.S Pipe In Bending Design. Seat Frame Should Have 180 Degree Rotational. Handle: Is Made Of ?25 Mm Round M.S Bright Bar. All Remaining Frame Is Made By ? 88 X3mm Thick And ?60 X3mm Thick Ms Pipe. Weight Plates: Rubberized Moulding Round Weight Plates Are Used. Weight Plates Holder With Spring Lock And Spare Weights Holder: Is Made By Hard Chrome Plated Mild Steel ?48 Dia Pipe Open Front Covered With Half Round Cap And Holder End Is Covered With Heavy Quality Rubber Ring Of Od-68 Mm And Id-48 Mm With 10Mm Wall Thickness For Free Weight Noiseless Operations. Bearing: Lubricated High Grade 6305 Irs Steel Ball Bearing Pins: Are Made Up Of M.S Bright Bar. Bearing Bushes: ? 75Mm Od Seamless Pipe. Weight Plate Mounting Pipe Is Of 048 Mm Ms Pipe. Padding And Cushion; Seats And Pads Are Made Up Of 6 Mm Thick M.S Plate With 2 Inches Of High-Density Foam And Finally Covered With Completely Stitched Heavy Vinyl Cover In Any Color. Foam Roller; Foam Roller Made Up Of High Density Composed Foam And Covered With Stitched Heavy Vinyl Cover, And Their Ends Are Covered With Aluminum Or Mild Steel Chrome Plated Caps And M8 Allen Bolt. Hardware : All Hardwares Uses Button Heads Bolts And Nuts Made Up Of High Tensile Steel. Hand Grips: Hand Grips Is Used On Handles Wherever Necessary Made Up Of High-Quality Rubber And Handle Ends Are Covered With Aluminum/Pp/Nylon Caps With Grub Screw For Long Endurance. Spring Knob: Mechanism Is Used For Seat Height Adjustment. Closing Caps: All Open Ends Should Close Using Closing Caps Of Pp/Nylon/Hdpe Material. Laser Cutting: Profiles Of 8 Mm 6Mm And 4Mm Thick M.S Sheet Are Used For Connecting Subordinates With Each Other. Rubber: Safety Base Pads: Anti-Skid Safety Base Pads Made Up Superior Rubber To Prevent Slippery And Damage To Floor. Heavy Duty 20Mm Thick Rubber Pads Are Placed For Resting Handle For Noise Less Operations. Powders Coating: All Components Are Chemically Treated To Seal Exterior And Interior Surfaces Against Corrosion. The Components Are Electro Statically Powder Coated At Minimum 80-100-Micron Thickness To Make It Resistant To Scratch, Corrosion And Humidity In Dual Color Combination. Safety Instructions And Exercise Chart On Machine - Start & Finish Position Chart Stick On 5Mm Thick Mild Steel Plate. E-Z Bar 28 Mm Dia With Collors Chrome Plated E-Z Bar 50 Mm Dia With Collors Chrome Plated Barbell Bars 28 Mm Dia With Collors Chrome Plated Barbell Bars 50 Mm Dia With Collors Chrome Plated M.S Hard Chrome Plated Weight Plates. Rubberized Weight Plate M.S Hard Chrome Plated Dumbbells Rubberized Dumbbells Gym Mat Gymnasium Mat Mirror For Gymnasiums Trademill - Commercial Trademill-Semi Commercial Ellipticals-Commercial Upright Bikes - Commercial Recumbent Bike - Commercial Spine Bike - Commercial Exer Cycle 4 Station Dual Multi Gym Chest Press Cum Shoulder Press-80 Kg Lat Cum Rowing - 80 Kg Leg Extension Cum Prone Leg Curl - 75 Kg Bicep Cum Triceps - 75 Kg Wrist Conditioner - 50 Kg Preacher Curl Machine - 60 Kg Lat Pull Down - 80 Kg Chest Press - 80 Kg Multi Functional Trainer - 120 Kg Pec Fly With Rear Pelt - 80Kg Shoulder Press - 70 Kg Leg Extension & Leg Curl Combo - 80 Kg Multi Hip- 60 Kg Assisted Chin-Up - 75 Kg Tricep Bench Press Bench Incline Bench Decline Bench Adjustable Bench 45 Degree Leg Press 7 Hack With Leg Press Smith Machine Rack For 20 Dumbells With Bar Rack Weight Plate Rack Power Cage E-Z Bar 50 Mm Dia With Collors Chrome Plated E-Z Bar 25 Mm Dia With Collors Chrome Plated Barbell Bars 50 Mm Dia With Collors Chrome Plated Barbell Bars 25 Mm Dia With Collors Chrome Plated M.S Hard Chrome Plated Weight Plates. Rubberized Weight Plate M.S Hard Chrome Plated Dumbbells. Rubberized Dumbbells Gym Mat Gymnasium Mat Trademill - Commercial Trademill - Semi Commercial Ellipticals - Commercial Upright Bikes - Commercial Recumbent Bike - Commercial Spine Bike - Commercial Air Walker Providing And Fixing Air Walker Manufactured By Combination Of Mild Steel And Alt-Season Artificial Wood To Seek Eco-Friendly Greenery Effect. Dimensions: L X W X H 1210X390x1264mm. 1 Main Frame Cover - Completely Covered Top To Bottom With All-Season Artificial Wood, Outer Size 120X120mm, 100 X 100 Mm Inner Area To Accommodate Square Tube Shape Which Is Completely Molded In One Single Piece. 2 Main Frame – Consist 91X91x2.5Mm Thickness Square Tube Get Maximum Internal Strength To Structure. 3 Paddle- 042Mm Od B Class Gl Pipe. 4 Handle Demountable Type - ? 33Mm Od B Class Gl Pipe Attached 5 Mm Thick Ms Plate For Demountable System 5 Footrest- Cast Iron 124X296x5mm Thick And M.S. Plate Of 2Mm Thick Used As Support. 6 Main Pipe Top Closing Cap’S- Decent Design Size 120X120 Pp/Hdpe/Ms. Material. 7 Main Frame Bottom Protective Cover -Decent Design Pp/Hdpe Material. 8 Nut & Bolts Closing Caps- All Nut & Bolt Closing Caps Made From Stainless Steel Press Fit Or Pp/Hdpe. 9 Bracket- 8Mm Thick Laser Profile Is Use To Support Paddle Frame. 10 Foundation Stool: Made From Main Pipe 91X91x2mm Pipe And Top Support Of M.S. Plate Of 250X250mm Square 8Mm Thickness Is Welded On Top. Torque Steel Is Used To Support Center Pipe. Height Of Stool Is 3Ft. 11 Foundation Plate -M.S. 250X250mm Square With 8Mm Thick. 12 Foundation Stool Is Embedded In C.C. Stock Below Ground Level. 13 Bearing- 6005 Use Is Permanent Lubricated Reputed Brands Or Self-Lubricated Imported Bushing. 14 Hardware Nut & Bolts- High Tensile Steel Zink Plated 15 Pins - ? 25Mm M.S./Stainless Steel Specification 304 Duly Machined As Per Size. 16 Circlips- A 24 Circlips Are Used For Assembly. 17 Bearing Bushes- ? 60Mm Od And - 0 50Mm Od Seamless Pipe. 18 Surface Coating-Best Quality Of Powder Coating 80 To 100 Micron. 19 Safety Instructions And Exercise Chart- Made From Aluminum/Stainless Steel Stick-On Product. Chest Press Double Providing And Fixing Chest Press Double Manufactured By Combination Of Mild Steel And All-Season Artificial Wood To Seek Eco-Friendly Greenery Effect. Dimensions: L X W X H 1975X720x1920mm. 1 Main Frame Cover - Completely Covered Top To Bottom With All-Season Artificial Wood, Outer Size 120X120mm, 100 X 100 Mm Inner Area To Accommodate Square Tube Shape Which Is Completely Molded In One Single Piece. 2 Main Center Pipe- - 91X91x2.5Mm Thickness Square Tube Get Maximum Internal Strength To Structure. 3 Remaining Frame- Made Up Of ?48Mmod 60 Od B Class G.I. Pipe. 4 Handle - Made Up Of ? 48Mm Od B Class G.I. Pipe, 5 Connecting Link - Made Up Of ?48Mmod B Class G.I. Pipe. 6 Seat & Back Rest - 330 X 300X 2Mm Thick M.S. Seat With Corner Fillet For Safety. 7 Handle Is Connected With Frame By 8 Mm Laser Cutting Ms Profile 8 Main Pipe Top Closing Cap’S- Decent Design Size 120X120 Pp/Hdpe/Ms. Material 9 Main Frame Bottom Protective Cover - Decent Design Pp/Hdpe Material. 10 Nut & Bolts Closing Caps- Ail Nut & Bolt Closing Caps Made From Pp/Hdpe/Ss 11 Bearing Bush Closing Cap’S-Pp/Ss/Hdpe Material. 12 Foundation Stool: Made From Main Pipe 91X91x2mm Mm Pipe And Top Support Of M.S. Plate Of 250X250mm Squire 8Mm Thickness Is Welded Top. Torque Steel Is in Ratnagiri - Maharashtra has been published.
The last date of this tender is 01/12/2020, work value is  0 (Refer Doc) INR, EMD is  70000 INR and tender document fees is  4200 INR
For more details call us on +91 92760 83333 for bidding support this tender, GeM, vendor registration (if any) and tender BOQ documents.

Tender Document

Related Information

Location

Ratnagiri - Maharashtra ( IN )

Ownership

State Government Of Maharashtra

Sector

Sports And Health Services

Important Dates

Published on

20 Nov, 2020

Submission Date

27 Nov, 2020

Opening Date

01 Dec, 2020

Key Values

Work Value

Refer Doc

EMD

70.0 Thousand

Document Fee

4.2 Thousand
Tender Document Liaison Service Connect with us