Notice Inviting Tender (NIT) by the Central Government And Public Sector Of India for Supply Of Ctvs Surgical Consumable Items- Iabp Catheter 7.5 Fr • Catheter Size Should Be 7.5 French With Balloon Volume Displacement Range 30 Cc -40 Cc. • Should Enable Fast Gas-Shuttle Performance In Situations Of Tachyarrythmias • Should Enable Smooth Insertion With Minimum Force. • Catheter Should Be Insertable In Both Options – With Sheath / Sheath Less. • Should Have Kink Resistant Wire Reinforced Body • Should Give Sharp Calibrated Arterial Waveforms On The Monitor. • Should Enable Consistent Prolonged Augmentation Without The Need For Frequent Line Flushing. • Should Have High Fatigue Resistance. • Should Inflate Immediately With Start-Up Of Machine. • Balloon Membrane Should Have High Abrasion Resistance And Minimum Thrombogenicity. • Compact Efficient Protective Packing For Balloon Membrane Protection. • Balloon Catheter Kit Should Have All Requisite Accessories – 1 / 2 Guide Wires, Dilators, Sheath, Gas Tubing, Console Connector If Required. • Catheter Should Be Connectable To All Standard Iabp Machine Consoles. • Should Be Fda Approved Iabp Catheter Small Adult 7.0 Fr • Catheter Size Should Be 7.0 French With Balloon Volume Displacement Range 20-30 Cc. • Should Enable Fast Gas-Shuttle Performance In Situations Of Tachyarrythmias • Should Enable Smooth Insertion With Minimum Force. • Catheter Should Be Insertable In Both Options – With Sheath / Sheathless. • Should Have Kink Resistant Wire Reinforced Body • Should Give Sharp Calibrated Arterial Waveforms On The Monitor. • Should Enable Consistent Prolonged Augmentation Without The Need For Frequent Line Flushing. • Should Have High Fatigue Resistance. • Should Inflate Immediately With Start-Up Of Machine. • Balloon Membrane Should Have High Abrasion Resistance And Minimum Thrombogenicity. • Compact Efficient Protective Packing For Balloon Membrane Protection. • Balloon Catheter Kit Should Have All Requisite Accessories – Puncture Angiographic Needles, 1 Or 2 Guide Wires, Dilators, Sheath, Gas Tubing, Console Adapter, Catheter Extender, Three-Way Stopcock. • Catheter Should Be Connectable To All Standard Iabp Machine Consoles. • Should Be Fda Approved. 1. Iabp Catheter Large Adult 8 Fr • Catheter Size Should Be 8.0 French With Balloon Volume Displacement Range 40-50 Cc. • Should Enable Fast Gas-Shuttle Performance In Situations Of Tachyarrythmias • Should Enable Smooth Insertion With Minimum Force. • Catheter Should Be Insertable In Both Options – With Sheath / Sheathless. • Should Have Kink Resistant Wire Reinforced Body • Should Give Sharp Calibrated Arterial Waveforms On The Monitor. • Should Enable Consistent Prolonged Augmentation Without The Need For Frequent Line Flashings. • Should Have High Fatigue Resistance. • Should Inflate Immediately With Start-Up Of Machine. • Balloon Membrane Should Have High Abrasion Resistance And Minimum Thrombogenicity. • Compact Efficient Protective Packing For Balloon Membrane Protection. • Balloon Catheter Kit Should Have All Requisite Accessories – 1 / 2 Guide Wires, Dilators, Sheath, Gas Tubing, Console Connector If Required . • Catheter Should Be Connectable To All Standard Iabp Machine Consoles. • Should Be Fda Approved. Mist Blower • Surgical Blower Humidifier Intended For Use During Cardiac And Other Fine Surgeries. • Should Be Made Up Of Latex Free, Non-Toxic Medical Grade Material. • Specially Designed For Improving The Visibility At Anastomotic Or Other Fine Surgical Sites. • Should Create A Consistent And Predictable Blood Clearing Mist. • Should Consist Of An Extra Soft Tip, Preceded By A Shaft And A Soft Textured, Ergonomic Handle Followed By A Flexible Connector Provided With A Dual Lumen Tubing That Entails Passage Of Normal Saline At Gentle Air Pressure. • Should Have Specialized Nozzle Utilizing A Micro Orifice For Fluid Delivery And A Separate Orifice For Gas Delivery. • Should Have The Malleable Shaft And On/Off Control On The Hand Piece. • Sterile, Individually Packed In A Box. Ima Needle • Should Be Made Of Medical Grade Stainless Steel • Should Be Used For Flushing, Irrigation And Injection • Tip Should Be 3Mm And 6.5Cm Long2 .5” • The Lumen Should Be Of 1 Mm Or Lessonly. • The Tip Of Cannula Should Be Bulbous Andatraumatic. • The Cannula Should End With Female Luer Fitting: Which Can Be Attached To Any Regular 5Ml Or 10Mlsyringe • Prototype: Debakey Heparin Needle Smallcatalogue #: 351575 Https://Www.Teleflexsurgicalcatalog.Com/Pilling/Product/351575-Debakey-Heparin-Needle-Small Vascular Access Sheath 4Fr-9Fr Kit Radio-Opaque Polyurethane Sheath 7.5-11 Cm Long, Color Coded. One Haemostasis Valve And Attached Three-Way Stopcock. Vessel Dilator With Snap Lock Feature Guidewire Vascular Access Sheath 10 Fr-14 Fr Kit • Radio-Opaque Polyurethane Sheath 7 Color Coded. • One Haemostasis Valve And Attached Three-Way Stopcock. • Vessel Dilator With Snap Lock Feature Guidewire Micro Introducer Kit • Tapered, Siliconized Micro-Introducer For Smooth Vessel Insertion 4 Fr, 5 Fr • High Quality Guidewire • Smooth Echogenic 7 Cm /9 Cm Needle. Rapid Priming Set • These Should Facilitate The Transfer Of Fluid During The Priming Of The Circuit. • Should Have Large Bore Spikes Attached To Flexible Tubing With A Clamp. • Should Terminate With Either An Open-End Tube Or A Male Luer. Disposable Bulldog Clamps All Sizes • Disposable’ Bull Dog’ Clamps For Temporary Occlusion Of Vascular Structures. • Atraumatic • Made With Standard Quality Plastic. Color Coded Aortic Punch 3Mm-5.5 Mm • Blade Should Be Able To Float Around The Punch. • Punch Should Be Available With Tapered Cutting Blade To Increase Visibility. • Should Be Available In All Functional Sizes Coronary Artery Retraction Clips 3Mm, 5Mm. • Should Be Designed To Improve Exposure To A Coronary Anastomosis Site. • Should Be Able To Small Prongs And Gently Hold Tissues Away From The Vessel To Improve Vision. Epicardial Spring Retractor Fat Spreader Blunt Prongs • 3 X 3 Blunt Prongs • Size : 25Mm-38Mm • Prototype: Http://Unimedic.Co.Jp/Product/Geister/Pdf/Epicardial.Pdf Epicardial Spring Retractor Fat Spreader Sharp Prongs • 3 X 3 Sharp Prongs • Size : 25Mm-38Mm • Prototype: Http://Unimedic.Co.Jp/Product/Geister/Pdf/Epicardial.Pdf Emergency Cricothyroidotomy Set • Should Have A Conical Introducer, • Dilators Should Be Made Of Stainless Steel, • Cricothyroidotomy Tubes Should Be Of Medical Grade Plastic. • With 15 Mm Connector, Flexible Tube Extension Made Of Silicone, Scalpel, One Way Syringe, Comfort Neck Band Sizes 2Mm, 4Mm. Percutaneous Suture Closure Device • Percutaneous Suture-Mediated Closure System • Should Be Composed Of A Plunger, Handle, Guidewire, And Sheath. • The Device Should Deliver A Single Suture Stitch To Close The Puncture Sites Access Sites In Large Vessels In The Leg Femoral Vein Or Artery Following Catheterization Procedures. • It Should Be Possible To Close Puncture With 5-21Fr Max. 26F Od1 Arterial Sheaths And 5-24Frmax. 29F Od1 Venous Sheaths.Prototype : Perclose. Tissue Stabilizer For Minimally Invasive Beating Heart Surgery • Should Be Stabilizer To Be Used Via Thoracotomy With Detachable Shaft And Should Have Fully Rotating Pods Tissue Stabilizer For Beating Heart Surgery • Should Be A Low-Profile Tissue Stabilizer With Auto Spread Feature Of Pods. Heart Positioner For Minimally Invasive Beating Heart Surgery • Should Be A Positioner With Detachable Shaft For Mics Via Thoracotomy. Heart Positioner For Beating Heart Surgery • Should Be A Low-Profile Positioner For Off Apex Position Use/ To Lift The Heart For Ctvs Department On 2 Year Rate Contract Basis Part I in New Delhi - Delhi has been published. The last date of this tender is 03/12/2020, work value is 0 (Refer Doc) INR, EMD is 50000 INR and tender document fees is 0 (Refer Doc) INR For more details call us on +91 92760 83333 for bidding support this tender, GeM, vendor registration (if any) and tender BOQ documents.
Tender Document