Notice Inviting Tender (NIT) by the Corporations And Associations And Others Of Kerala for Supply Of 3.2 Preparation Of Foundation For Embankment Scarifying Existing Bituminous Surface To A Depth Of 150 Mm By Mechanical Meansscarifying The Existing Bituminous Road Surface To A Depth Of 150 Mm And Disposal Of Scarified Material With A Lift Upto 3 M And Lead Upto 1000 M As Per Technical Specification Clause 301.4. 4.11.2 : Granular Sub-Base/Base/Surface Course With Local Materials Table 400.13 By Mix In Place Method Normal. Construction Of Granular Sub-Base By Providing Local Material Spreading In Uniform Layers With Motor Grader On Prepared Surface, Mixing By Mix In Place Method With Rotavator At Once And Compacting With Smooth Wheel Roller To Achieve The Desired Density Complete As Per Clause 401.4 As Per Technical Specification Clause 408. <Br>Ii Using Gravel Mix Soil. 4.9 : Wet Mix Macadam <Br> Providing, Laying, Spreading And Compacting Graded Stone Aggregate To Wet Mix Macadam Specification Including Premixing The Material With Water At Omc In Mechanical Mixer Pug Mill, Carriage Of Mixed Material By Tipper To Site, Laying In Uniform Layers In Sub-Base/Base Course On A Well Prepared Sub-Base And Compacting With Smooth Wheel Roller Of 80 To 100Kn Weight To Achieve The Desired Density Including Lighting, Barricading And Maintenance Of Diversion, Etc As Per Tables 400.11 & 400.12 And Technical Specification Clause 406. <Br> By Mechanical Means With 1 Km Lead 75.5.1.1Pb : Prime Coat - Low Porosity - With Packed Bitumen Rates <Br> Providing And Applying Primer Coat With Bitumen Emulsion Ss-1 On Prepared Surface Of Granular Base Including Cleaning Of Road Surface And Spraying Primer At The Rate Of 0.70-1.0 Kg/Sqm Using Mechanical Means As Per Technical Specification Clause 502 75.5.2.2Pb : Tack Coat - With Packed Bitumen Rates <Br> Providing And Applying Tack Coat With Bitumen Emulsion Rs-1 Using Emulsion Distributor At The Rate Of 0.25 To 0.30 Kg Per Sqm On The Prepared Dry And Hungry Bituminous Surface Cleaned With Hydraulic Broom As Per Technical Specification Clause 503. 75.5.2.3Pb : Tack Coat - With Packed Bitumen Rates <Br> Providing And Applying Tack Coat With Bitumen Emulsion Rs-1 Using Emulsion Distributor At The Rate Of 0.25 To 0.30 Kg Per Sqm On The Prepared Granular Surfaces Treated With Primer & Cleaned With Hydraulic Broom As Per Technical Specification Clause 503. 75.5.5.A.1Pb : Modified Penetration Macadam 50 Mm Thick Using Bitumen S-65 - Packed Bitumen Rates <Br> Construction Of Penetration Macadam Over Prepared Base By Providing A Layer Of Compacted Crushed Coarse Aggregate Using Chips Spreader With Alternate Applications Of Bituminous Binder And Key Aggregates And Rolling With A Three Wheel 80-100 Kn Static Roller To Achieve The Desired Degree Of Compaction As Per Technical Specification Clause 506. 75.5.5.B.2Pb : Modified Penetration Macadam 75 Mm Thick Using Bitumen S-65 - Packed Bitumen Rates <Br> Construction Of Penetration Macadam Over Prepared Base By Providing A Layer Of Compacted Crushed Coarse Aggregate Using Chips Spreader With Alternate Applications Of Bituminous Binder And Key Aggregates And Rolling With A Three Wheel 80-100 Kn Static Roller To Achieve The Desired Degree Of Compaction As Per Technical Specification Clause 506. 75.5.9.2.2.Pa : Plastic Roads - Bitumen S-65 <Br> 20Mm Thick Open-Graded Premix Carpet Using Bituminous Penetration Grade/Modified Bitumen Binder <Br> Providing, Laying And Rolling Of Open-Graded Premix Carpet Of 20 Mm Thickness Composed Of 13.2 Mm To 5.6 Mm Aggregates Either Using Penetration Grade Bitumen Or Emulsion To Required Line, Grade And Level To Serve As Wearing Course On A Previously Prepared Base, Including Mixing In A Suitable Plant, Laying And Rolling With A Three Wheel 80-100 Kn Static Roller Capacity, Finished To Required Level And Grades To Be Followed By Seal Coat Of Either Type A Or Type B Or Type C As Per Technical Specification Clause 508 With 7% Of Bitumen Replaced By Shredded Waste Plastic <Br> Case - I By Manual Means <Br> Ii Bitumen S-65 Vg - 30 75.5.12.A.3.2Pb : Seal Coat - Manual Means - Type C - Bitumen S-65 - Packed Bitumen Rates <Br> Providing And Laying Seal Coat Sealing The Voids In A Bituminous Surface Laid To The Specified Levels, Grade And Cross Fall Using Type A, Type B And Type C As Per Technical Specification Clause 510 <Br> A. By Manual Means <Br> Case Iii : Type C <Br> Ii Bitumen S-65 3.5.1 : Excavation In Cutting In Soil By Manual Means With Lead Upto 50 Mexcavation For Roadway In Soil Using Manual Means For Carrying Of Cut Earth To Embankment Site With A Lift Upto 1.5 M And Lead Upto 50 M As Per Technical Specification Clause 302.3 11.4.3.1 : Providing Concrete For Plain/Reinforced Concrete In Open Foundations Complete As Per Drawings And Technical Specifications Clause 802, 803, 1202 & 1203Iii.P.C.C. Grade M 20 Inominal Mix 1:2:4 10.4.A.3 : Direction And Place Identification Signs With Size More Than 0.9 Sqm Size Board<Br> A. Retro-Reflectorised Traffic Signs <Br>3 Providing And Erecting Direction And Place Identification Retro- Reflectorised Sign As Per Irc:67 Made Of Encapsulated Lens Type Reflective Sheeting Vide Clause 1701.2.3, Fixed Over Aluminium Sheeting, 2 Mm Thick With Area Exceeding 0.9 Sqm Supported On Rcc Posts 100 Mm X 100 Mm Firmly Fixed To The Ground By Means Of Properly Designed Foundation With M 15 Grade Cement Concrete 450 Mm X 450 Mm X 600 Mm, 600 Mm Below Ground Level As Per Approved Drawing And Technical Specification Clause 1701 in Kozhikode - Kerala has been published.
The last date of this tender is 12/08/2020, work value is  892275 INR, EMD is  22310 INR and tender document fees is  1785 INR
For more details call us on +91 92760 83333 for bidding support this tender, GeM, vendor registration (if any) and tender BOQ documents.