Filters

List of bar Tenders

List of latest bar Tenders in Indian Tenders. Click on any bar Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for bar Tenders.

All-Tenders (107)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :34796381 | 24 Jul, 2025

Tender Value : 0

Pune - Maharashtra

Tender for gem bids for cement opc 43 grade, lime unslacked, steel 12 mm diatmt bar, requirment of upvc pipe 1 inch dia, upvc elbowbrass 0.75 inch x0.50 inch, angle cook 0.50 inch, cp bibcook 0.50 inch, upvc tee 0.75 inch, upvc elbow 0.75 inch, connection pipe 0.50 inch, tank nipple 1 inch, ball valve1 inch, upvc union 1 inch, upvc reducer socket 1 inch to0.75 inch, female threaded adopter upvc 1 inch, malethreaded adopter upvc 1 inch, uovc elbow 1 inch, femalethreaded adopter upvc 0.75 inch, upvc reducer 1 inchto0.75 inch, taflon tape, pvc waste coupling 40 mm dia, wash basin set, wc european type, urinal plot 11 inch x11 inch x 15 inch, pvc water storage tank 500 ltr, looking mirror, stainless steel twin type towel holder forbathroom, pvc conduit pipe 20 mm with isi mark 3 mtrlength, pvc long bend 20 mm with isi mark, pvc junctionbox 20 mm four way with isi mark, pvc round or holder orjunction plate 4inch, metal flash box 6 module, metal flashbox 4 module, plate and frame 6 module, plate and frame4 module, switch 06a modular isi marked, socket 06amodular isi marked, celling rose legrand nos, mcb sp10a b type, pvc mcb box 2 way legrand nos, insulationtape 1.8x6.5x0.125 mm, led tube 4 feet 20 watts isimarked, led tube 2 feet 10 watts isi marked, pvc copperwire 2.5 sqmm red roll of 90 mtr, pvc copper wire 2.5sqmm black roll of 90 mtr, pvc copper wire 2.5 sqmmgreen roll of 90 mtr, pvc copper wire 1.5 sqmm red rollof 90 mtr, pvc copper wire 1.5 sqmm black roll of 90 mtr, steel screw 1.5 inch black pkt of 50, cocrete drill bit hss06 mm, exhaust fan 300 mm, door size 0.90 x 2.15 mtr, ventilator size 2.00 ft x 1.5 ft, cgi sheet 8ft x 3ft 0.63 mmthick, ms square pipe 20x20 mm thickness 2.00 mm, sshd screw 0.50 inch 100 nos per pkt, cutting wheels 4 inchdia, welding electrode, requirement of wooden scantlingsize 7 feet x 3 inch x 2 inch, requirement of woodenbeading 7 feet x 1.5 inch x 0.50 inch, wire nails 1 inch, wire nails 1.5 inch, wire nails 4 inch, wood primer, oilpaint for celling and steel structure, thinner, paintingbrush 2 inch and 3 inch, stone metal 45 mm, stone chips20 mm, crushed sand, burnt clay brick size 214 mm x 95mm, interlocking tiles 6 cm thick of size 0.225x0.1125 m or0.0253 sqm area per nos

Central Government/Public Sector

TRN :34796498 | 26 Jul, 2025

Tender Value : 0

Leh Ladakh - Jammu And Kashmir

Tender for gem bids for chain link fence, angle iron and supports, ms flat iron, barbed wire, transportation and installation includingcement work

Central Government/Public Sector

TRN :34781902 | 28 Jul, 2025

Tender Value : 0

New Delhi - Delhi

Tender for gem bids for 8340000486 pin iron for tent 152 mm, e3 4030 000441clamps double throated 12mm, 14 5420 hhy 880hardner hy 880, 4030 000452 grip bull dog sui table10mm, 7920000009 demissing compund tube, nk we50044 screwc ounter shunk head, ixc 1060 reamersguard adj, g10023454400 box spaner 10x11, f1 51205478412 spaner djoe, f1 5120 2287445 tubler spaner, wc 63973 drill portable heavy duty 1 inch dia 240vac rnd 559, aa 146 kk 7 98 cm width, aa 81 kk 750mm type b, nk we 50165 thermo pricker, 2590000857 chock storage timber ceij, y3 wb 1502batteries dry lamp electric, e3 4010 000120 swr 1by 2 inch 12mm rope steel wire galvanised gs 11, 1502 batteries dry lamp electric, 102200201002 hppump oil, 43 3040 000018 terminal spigot 11 point5mm, f1 5120 000991 bar crow chiesel end 1070 x29mm round, f1 5120 001012 bar crow chiesel andclaw ends 685 mm x 29mm, 5660 00013 box wooden, 1123 0010 1001 membance cleanner 11, 1123 00102001 membrane cleaner 22, 1123 0010 3001membance cleanner 33, 1123 0010 4001 membancecleanner 44

Central Government And Public Sector

TRN :34782739 | 28 Jul, 2025

Tender Value : 13.14 Lacs

Chamba - Himachal Pradesh

Tender for gem bids for ms plate size 16mm, ms plate size 18mm, ms plate size20mm, ms plate size 28mm, 90 degree ms angle size25mm, 45 degree ms angle size 25mm, ms hex bolt withnut 12x1.75x40 mm, hex screw m24x3x100 lg, materialss410, hex screw m24x3x50, material ss410, hex screwm24x3x125 lg, material ss410, ss hex bolt with nut3by8mmx16gx1 inch, ms hex bolt with nut 32x3.5x350, ss hex bolt with nut 20x2.5x100, ms hex bolt with nut12x1.75x35, ms hex bolt with nut 18x2.5x120, ss ballvalve 1 inch class 150 female thread, ss 90 degree elbow 1inch, ss 45 degree elbow 1 inch, ss ball valve 1.25 inchclass 150 female thread, ss 90 degree elbow 1.25 inch, ss45 degree elbow 1.25 inch, 1by2 inch ball valve steel, 1by2 inch 90 degree elbow steel, 1by2 inch 45 degreeelbow steel, d spanner 18x19, ring spanner 18x19, slidewrench 8, slide wrench 12, pipe wrench 8, pipe wrench 12, 1by2 to 1by4 inch female adapter npt, 1by4 to 1.25 inchss adapter with 60 degree cone both side, 1by4 to 1by2inch male adapter npt, 3by4 to 1by2 inch male adapternpt, 3by8 inch female to 1by2 inch male adapter npt, nrv 6 inch check valve, nrv 4 inch check valve, ms union1by2 inch, ms rod hexagonal 25mm, ms rod hexagonall40mm, 1.5 inch, 20 inch flange class 300, brass rod 2 inch, brass rod 1.5 inch, brass rod 2.5 inch, foot valve 3 inch, pvc suction hose pipe 3 inch dia, pvc suction hose pipe 6inch dia, clamp 4 inch, clamp 6 inch, 1by2 inch x 14 tpibsp hss round die, o-ring 3mm, o-ring 4mm, o-ring5.3mm, o-ring 5.7mm, o-ring 6mm, o-ring 8mm, o-ring 8.5mm, o-ring 9mm, rubber gasket sheet size 2mm, rubber gasket sheet size 3 mm, rubber gasket 2.5mmexact, steel putty 3473, thread locker 263, si 5900 flangesealant, sealant 495, super metal composite 1111, maintain 100, m seal 75gm, hydraulic sealant 545, 50mlpack, pipe repair kit, sf 790 gasket remover 510 gm, weldon shank 3by4 inch drill bit set 6, 8, 10, 12, 16, 20 mm, compressor belt size c90 1 34, filteration plant belt a800, a30 poly f plus, new hp compressor belt 30440903 -1000015342, 50 hp blower belt - b3500 b136, shapermachine belt b56, auto darkening welding helmet, testhose stauff minimess hose g-1by4 dn4, elc 50c cover, cutting wheel 4 inch, flap disc 4 inch, buffer wheel ag-4, abrassive belt with cloth backing, grain- al oxide, cutresistant hand gloves, cut level 4, die penetration test kitconsisting of cleaner, penetrant and developer, fillergauge .02 to 1.00mm, 600mm length, foam-spung for oilsoaking 2 inch thick, size- 4 ft x 6ft, plastic can 2 ltr, boxspanner 65mm, phosphate finish, bucket 20l, digitalvernier caliper, carbide drill bit set 1 to 13mm, tungstencarbide tipped tool for machining, scotch self bonding tape3.8x9.15x0.075 cubic cm, t30 compressor oil of 5 ltr pack, gland 10mm, taflon tape, ht insulation tape 25mm wide25m long roll, measuring tape 3 mtr, ss scale of 6inchlength, hose wp 700 bar e6 series with coupling set ofc604, marker parmanent type, welding electrode 7018 -3.15mm, welding electrode 7018 - 4 mm, weldingelectrode 7018 - 2.50mm, welding electrode 6013 -3.15mm, welding electrode 6013 - 2.50mm, weldingelectrode e-308 - 3.15 mm, welding electrode cast iron -119e size 2.50mm, star coupling rubber buna-n, gasket2mm non asbestos, caf gasket 3mm thick- non asbestos

Central Government/Public Sector

TRN :34785309 | 28 Jul, 2025

Tender Value : 1.87 Lacs

Raigad - Maharashtra

Tender for gem bids for feather broom phool jhadu, super mop rifills, polish metalbrass, duster cloth, cloth sponge, cleaner white toilet-harpic, cotton waste, cloth stockline-mutton cloth, broom country, brush sweeping hand, cleaning bar foruntensils 500 gms, brush with long handle, scrubberwith handle, scrub pads, steel cleaning liquid, spin mopset, wiper, rags cotton coloured, blue laundry, redoxide iron, hand wash liquid, glass cleaner, cleaningliquid for untensils, hit spray, hand towel, detergentpowder, room freshner, deodriser refill 8cmx3cm, soapliquid toilet, disnifectant fluid white or black -phenol, refill for automatic air freshner 250ml, rat sticking gel, urinal screen mats, mosquito repellent machine with liquid, biodegradable garbage bags- gash bags, napthaleneballs, plastic mug, dust bin, spray hand liquid insecticide, distilled water, mosquito repellentgel odomos, fiberdust brush, distemper white, paint brush 4 inch, paintbrush 2 inch, paint roller 4 inch, paint roller 7, paintroller 12 inch, paint roller 9 inch, paint roller 6 inch

Central Government/Public Sector

TRN :34785857 | 28 Jul, 2025

Tender Value : 0

Visakhapatnam - Andhra Pradesh

Tender for gem bids for mild steel plates 2500l x 1250w x 2 thick - in mm, mildsteel plates 2500l x 1250w x 4 thick - in mm, mild steelplates 2500l x 1250w x 6 thick - in mm, mild steel plates2500l x 1250w x 8 thick - in mm, mild steel plates 2500l x1250w x 10 thick - in mm, mild steel plates 2500l x1250w x 12 thick - in mm, mild steel plates 2500l x1250w x 14 thick - in mm, mild steel plates 2500l x1250w x 16 thick - in mm, mild steel plates 2500l x1250w x 18 thick - in mm, mild steel plates 2500l x1250w x 20 thick- in mm, en-8 round bar 330 dia x2500l - in mm, ss 304 plates 2500l x 1250w x 1th -in mm, ss 304 plates 2500l x 1250w x 2th -in mm, ss 304plates 2500l x 1250w x 3th -in mm, ss 304 plates 2500l x1250w x 4th -in mm, ss 304 plates 2500l x 1250w x 5th-in mm, ss 304 plates 2500l x 1250w x 6th -in mm, ss304 plates 2500l x 1250w x 8th -in mm, ss 304 plates2500l x 1250w x 10th -in mm, ss 304 plates 2500l x1250w x 12th -in mm, ss 304 rods dia 5 x 4000l - in mm, ss 304 rods dia 10 x 4000l - in mm, ss 304 rods dia15 x 4000l - in mm, ss 304 rods dia 20 x 4000l - in mm, ss 304 rods dia 60 x 2000l - in mm, ss 304 rods dia 80x 2000l - in mm, ss 304 rods dia 100 x 2000l - in mm, ss 304 rods dia 120 x 1000l - in mm, ss 304 rods dia150 x 1000l - in mm, ss 304 rods dia 175 x 1000l - inmm, ss 304 rods dia 200 x 1000l - in mm, ss 316lplates 2500l x 1250w x 1 thick - in mm, ss 316l plates2500l x 1250w x 2 thick - in mm, ss 316l plates 2500l x1250w x 4 thick - in mm, ss 316l plates 2500l x 1250w x5 thick - in mm, ss 316l plates 2500l x 1250w x 6 thick -in mm, ss 316l plates 2500l x 1250w x 8 thick - in mm, en-24 rods dia 16 x 4000l - in mm, en-24 rods dia 20 x4000l - in mm, en-24 rods dia 25 x 4000l - in mm, en-24 rods dia 30 x 4000l - in mm, en-24 rods dia 40 x4000l - in mm, en-24 rods dia 50 x 4000l - in mm

Central Government/Public Sector

TRN :34789418 | 28 Jul, 2025

Tender Value : 4.86 Lacs

Umiam - Meghalaya

Tender for gem bids for raw, m.s. flat, saw blade, m.s sheet 4x8 feet, ms equal angle, ms rectangular pipe, black conduit pipe, ms square pipe, ms rod, gi nuts and bolts, welding electrodes, enamelpaint mint green, thinner, ball bearings, pillow blockbearing, m s cold roll round bright bar, bicycle saddle, cycle frame double bar, crank and pedal for bicycle, 22teeth sprocket freewheel rear flywheel for bicycle, bicycle chain pitch, hexagonal galvanized nuts and boltsm10, heavy duty steel hatch hinge free swing, m.s rivets

Central Government/Public Sector

TRN :34777010 | 30 Jul, 2025

Tender Value : 4.54 Lacs

Kanchrapara - West Bengal

Tender for provision of digital printed laminated retro board with iron bar frame 1.0 inch x 1.0 inch square iron bar mounted on an acp base and framed with an aluminum channel, at shop nos.9, 9a, 10, 11, 11a, 14 and 34/kpa with a total quantity of 1300 sq.feet.

Central Government/Public Sector

TRN :34779981 | 28 Jul, 2025

Tender Value : 8.10 Lacs

Narmadapuram - Madhya Pradesh

Tender for brass or phosphor bronze round and square and hollow bar and steel en8 bar

Central Government/Public Sector

TRN :34767800 | 24 Jul, 2025

Tender Value : 2.96 Crore

Ranga Reddy - Telangana

Tender for gem bids for procurement, bar round,stainless steel,p/n d17-4ph ann 5/16in (8.0mm),solution heattreated, central ground, ams 5643r, austenetic type-non magnetic bright stainless steel plate in cold rolled,annealed,pickled condition con.to us federal spec.qq-s-766c, aisi 304-chromium-18 percentage , nickle-8 percentage , halstd 1210,size thickness6mm x 1000 x 1000mm. plate, stainless steel,aisi type 304l,annealed, no.2d finish, astm a-666, size - thickness6.35 x 1000 x1000mm bar round,low alloy steel, condition annealed, hot rolled,specification dsae 4340 /en24, bs 817m40, ams-s-5000a cond.c(canc), size - dia 15.9mm, 1 to 2m length bar round,stainless steel,17-4ph,solution heat treated, central ground ams 5643r, size - dia 15.9 x 500mm, bar round,stainless steel,d17-4ph,solution heattreated, central ground, ams 5643r, size - dia 6.35 x 500 to 1000mm. austenitic type free machining non-magnetic bright quality stainless steel round conf.to hal std 1206,aisi-303-gr18/10,dia 65mmx2 to 3 mtrs length austenitic type free machining non-magnetic bright quality stainless steel hexagonal conf.to hal std 1206,aisi-303-gr18/10,a/f 19mmx2 to 3 mtrs length medium carbon steel cold drawn round conforming to hal std 1051, is 1570 part ii, grade (c-40 / 40 c 8) / en 8 , en 10083-3 / bs 080 m40 , bs 970 size dia 25 mm x 1 to 2 meters in length. ss 304 round, condition annealed, specification annealed, specification 304, qq-s-763 / 304, astm a276 / aisi 304 / 1.4301 grade x5 crni189, din 17440 / 1.4301 grade x5 crni1810, en 10088-3 / bs 304 s31, bs970 / uni x5crni1810, uni 6900 / 4 /gost 08kh 18n10 or o6kh 18n11 / is 1570-5 grade x04cr19ni9 / is 6603, grade x04 cr19ni9 / en 58e size dia 16 mm x 1 to 2 meters in length. ss 304 round, condition annealed, specification annealed, specification 304, qq-s-763 / 304, astm a276 / aisi 304 / 1.4301 grade x5 crni189, din 17440 / 1.4301 grade x5 crni1810, en 10088-3 / bs 304 s31, bs970 / uni x5crni1810, uni 6900 / 4 /gost 08kh 18n10 or o6kh 18n11 / is 1570-5 grade x04cr19ni9 / is 6603, grade x04 cr19ni9 / en 58e size dia 30 mm x 1 to 2 meters in length. hot rolled structural steel sheet, condition normalised, specification 1.0037 s 235jr, en 10025 / rst 37.2, din 17100 / fe 360 b, uni 7070 / bs 40b, bs 4360 size thickness 3 mm x 1000 x 1000 mm with pvc coating on both sides. stainless steel plate, specification ss 304 per qq-s-766 size thickness12 mm x 1000 x 1000 mm. bar round,stainless steel,aisi type 303, annealed,0.5in,cold finish, ams 5640u type 2, dia 12.7 (0.5in) x 500mm, austenitic type (303 se) free machining non-magnetic bright quality stainless steel hexagonal bar conforming to hal std 1206 / 303 se, astm a 582 / ams 5641 / ams 5640 type 2 / mil-s-7720, 303 se / bs 303 s 41, bs 970 / aisi 303 se size a/f 4.8 mm x 2 to 3 meters in length bar hexagonal,stainless steel,aisi type 303, sollution heat treated, ams 5640u, size -a/f 4.7625 x 500 to 1000 mm hexagonal,stainless steel,(5/8 in) ,aisi type 303 annealed, cold finish,ams5640u, type2, size -a/f15.875 (5/8in) x 500 to 1000mm ni-cr-mo alloy steel round, conforming to hal std 1032, condition ht (hrc 32- 38), specification 1.6562 40nicrmo8, din 17200 / en24,bs 970/bs 817 m40, bs 970 /is 5517 / 4367 / 3930 gr 40ni6cr4mo3 / gr 30chnml , gost 4543, size dia 20 mm x 1 to 2 meters in length. ni-cr-mo alloy steel round, conforming to hal std 1032, condition ht (hrc 32- 38) 1.6562 40nicrmo8, din 17200 / en24,bs 970/bs 817 m40, bs 970 / is 5517 / 4367 / 3930 grade 40ni6cr4mo3 / gr 30chnml , gost 4543 size dia 25 mm x 1 to 2 meters in length. hot rolled ni-cr-mo alloy steel round condition annealed, conforming to hal std 1032, as per en 24, bs 970 / bs 817 m40, bs 970 / gr 40, ni6 cr 4 mo 3, is 5517 or is 3930, size dia 25 mm x 1 to 2 meters in length. austenitic stainless steel rod, condition plusat (solution annealed), specification z10cnf18-09 (or) x8crnis18-09 as per en 10088-3, , tensile strength 500-750 mpa, size dia 6 mm x 1 to 2 meters in length. austenitic stainless steel rod, condition plusat (solution annealed), specification z2cn18-10 (or) x2crni18-10 as per en 10088-3,tensile strength 500-750 mpa size dia 7 mm x 1 to 2 meters in length. austenitic stainless steel rod, condition plusat (solution annealed) specification z10cnf18-09 (or) x8crnis18-09 as per en 10088-3, tensile strength 500-750 mpa ,size dia 14 mm x 1 to 2 meters in length.. austenitic stainless steel hexagonal rod, condition plusat (solution annealed), specification z10cnf18-09 (or) x8crnis18-09 as per en 10088-3, tensile strength 500-750 mpa ,size a/f 5 mm x 1to 2 meters in length. austenitic stainless steel hexagonal rod, condition plus c700, specification x8crnis18-09 as per en 10088-3, tensile strength rm equal to 700-850n/mm2, size a/f 5 mm x 1to 2 meters in length. aluminium bronze rod condition annealed, conforming to hal std 1313, ams 4640 / astm b150, c63200 size dia 35 mm x 1 to 2 meters in length aluminium bronze rod condition annealed, conforming to hal std 1313, ams 4640 / astm b150, c63200 size dia 40mm x 1 to 2 meters in length. aluminium bronze rod, condition hard (150 to 170 hb), specification (bs 1400 ab2) / (as 1565-c95810) / (astm b505 and b271-958) / (sae-ca958) / (uns-c95800), size dia 55 mm x 2 to 3 meters in length. aluminium bronze rod condition annealed, conforming to hal std 1313, ams 4640 / astm b150, c63200 / bs 1400 - ab2 size dia 65 mm x 1000 mm in length. brass sheet hal std 1300-1/4h, is 410-cuzn-37-1/4, size thickness 0.4mm x 350 x 1200mm with pvc coating on both sides. free machining brass rod, specification cuzn39pb3 r-430 as per en 12164 / hal std1301-1/2 hard, size dia 6 mm x 1 to2 mtrs in length. electrolytic copper sheet,strip andfoil, condition annealed (o) as per gr cu-etp, is 191 part v/ is 14811,gr etp/ cu-etp(mechanical properties),is1897/hal std 1310-o, size 0.8 mm x 350 mm x 1200 mm. copper tube conforming to hal std 1311, condition drawn, as per bs 2871 part 2, c101 / is 2501, etp tube size od 6 mm x 0.5 mm (id 5.0 mm) x 2 to 3 meters in length and ends should be covered with end caps. al. alloy sheet hal std 1252-1/2h,is-737-74 gr.31000 (ns-3)1/2h, bs 1470 gr.ns3 or l61, 59 or qqa-359 gr.3003 or enaw 573-3-3103 thickness1mmx1000x1000mm alclad al.alloy plates, spec. 2014/2014 a-t6 /wp/t651, cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad, is 736/al.clad 2014 ,astm b209/ d.t.d 5040 a/hal std 1250, th. thickness10 mm, min. size 1000x1000mm, tolerances as per ansi h35.2/ hal std. 1250. alclad al.alloy plates, spec. 2014/2014 a-t6 /wp/t651, cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad, is 736/al.clad 2014 ,astm b209/ d.t.d 5040 a/hal std 1250, th. thickness10 mm, min. size 1000x1000mm, tolerances as per ansi h35.2/ hal std. 1250. alclad al.alloy plates, spec. 2014/2014 a-t6 /wp/t651, cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad, is 736/al.clad 2014 ,astm b209/ d.t.d 5040 a/hal std 1250 th. thickness12 mm, min. size 1000x1000mm, tolerances as per ansi h35.2/ hal std. 1250. alclad al.alloy plates, spec. 2014/2014 a-t6 /wp/t651, cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad, is 736/al.clad 2014 ,astm b209/ d.t.d 5040 a/hal std 1250, th. thickness14 mm, min. size 1000x2000mm, tolerances as per ansi h35.2/ hal std. 1250. alclad al.alloy plates, spec. 2014/2014 a-t6 /wp/t651, cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad, is 736/al.clad 2014 ,astm b209/ d.t.d 5040 a/hal std 1250, th. thickness20 mm, min. size 1000x1500mm, tolerances as per ansi h35.2/ hal std. 1250. alclad al.alloy plates, spec. 2014/2014 a-t6 /wp/t651, cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad, is 736/al.clad 2014 ,astm b209/ d.t.d 5040 a/hal std 1250 th. thickness22.5 mm, min. size 3 feet x 6 feet .,tolerances as per ansi h35.2/ hal std. 1250. alclad al.alloy plates, spec. 2014/2014 a-t6 /wp/t651, cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad, is 736/al.clad 2014 ,astm b209/ d.t.d 5040 a/hal std 1250, th. thickness28.5 mm, min. size 1000x1000mm, tolerances as per ansi h35.2/ hal std. 1250. alclad al.alloy plates, spec. 2014/2014 a-t6 /wp/t651, cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad, is 736/al.clad 2014 ,astm b209/ d.t.d 5040 a/hal std 1250, th. thickness30 mm, min. size 1000x1000mm, tolerances as per ansi h35.2/ hal std. 1250. alclad al.alloy plates, spec. 2014/2014 a-t6 /wp/t651, cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad, is 736/al.clad 2014 ,astm b209/ d.t.d 5040 a/hal std 1250, th. thickness19.05 mm, min. size 1250 x 2500 mm, tolerances as per ansi h35.2/ hal std.1250. alclad al.alloy plates, spec. 2014/2014 a-t6 /wp/t651, cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad, is 736/al.clad 2014 ,astm b209/ d.t.d 5040 a/hal std 1250, th. thickness32.25 mm, min. size 1000x1000mm, tolerances as per ansi h35.2/ hal std. 1250. alclad al.alloy plates, spec. 2014/2014 a-t6 /wp/t651, cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad, is 736/al.clad 2014 ,astm b209/ d.t.d 5040 a/hal std 1250, th. thickness25.4 mm, min. size 1000x2000mm, tolerances as per ansi h35.2/ hal std. 1250. alclad al.alloy plates, spec. 2014/2014 a-t6 /wp/t651, cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad, is 736/al.clad 2014 ,astm b209/ d.t.d 5040 a/hal std 1250, th. thickness16 mm, min. size 1000x1000mm, tolerances as per ansi h35.2/ hal std. 1250. alclad al.alloy plates, spec. 2014/2014 a-t6 /wp/t651, cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad, is 736/al.clad 2014 ,astm b209/ d.t.d 5040 a/hal std 1250, th. thickness40 mm, min. size 1000x1000mm, tolerances as per ansi h35.2/ hal std.1250. alclad al.alloy plates, spec. 2014/2014 a-t6 /wp/t651, cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad, is 736/al.clad 2014 ,astm b209/ d.t.d 5040 a/hal std 1250, th. thickness57.2 mm, min. size 1000x1000mm, tolerances as per ansi h35.2/ hal std.1250. alclad al.alloy plates, spec. 2014/2014 a-t6 /wp/t651, cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad, is 736/al.clad 2014 ,astm b209/ d.t.d 5040 a/hal std 1250, th. thickness50 mm, min. size 1000x1000mm, tolerances as per ansi h35.2/ hal std.1250. alclad al.alloy plates, spec. 2014/2014 a-t6 /wp/t651, cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad, is 736/al.clad 2014 ,astm b209/ d.t.d 5040 a/hal std 1250, th. thickness60 mm, min. size 1000x1000mm, tolerances as per ansi h35.2/ hal std.1250. alclad al.alloy plates, spec. 2014/2014 a-t6 /wp/t651, cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad, is 736/al.clad 2014 ,astm b209/ d.t.d 5040 a/hal std 1250, th. thickness35 mm, min. size 1000x1000mm, tolerances as per ansi h35.2/ hal std.1250. alclad al.alloy plates, spec. 2014/2014 a-t6 /wp/t651, cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad, is 736/al.clad 2014 ,astm b209/ d.t.d 5040 a/hal std 1250, th. thickness69.85 mm, min. size 1000x1000mm, tolerances as per ansi h35.2/ hal std.1250. (approx. wt per sheet is 196 kgs) alclad al.alloy sheets, spec. 2014/2014 a-t6 /wp, cladding 1050 a /1070/19500/19700/6003 on both sides as per bs l165/bs l167 / en 4400-2/en 2087/gr 24345-wp al.clad, is 3436/al.clad 2014,astm b209/ams 4029 clad/hal std 1250, th. thickness5.0 mm, min. size 1000x1000mm, tolerances as per ansi h35.2/ hal std.1250. it should be protected with transparent pvc coating morethan 50micro on both sides. alclad al.alloy plates, spec. 2014/2014 a-t6 /wp/t651, cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad, is 736/al.clad 2014 ,astm b209/ d.t.d 5040 a/hal std 1250, th. thickness6.0 mm, min. size 1000x2000mm, tolerances as per ansi h35.2/ hal std.1250. alclad al.alloy plates, spec. 2014/2014 a-t6 /wp/t651, cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad, is 736/al.clad 2014 ,astm b209/ d.t.d 5040 a/hal std 1250, th. thickness8.0 mm, min. size 1000x1000mm, tolerances as per ansi h35.2/ hal std.1250. alclad al.alloy plates, spec. 2014/2014 a-t6 /wp/t651, cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad, is 736/al.clad 2014 ,astm b209/ d.t.d 5040 a/hal std 1250, th. thickness32.0 mm, min. size 1000x1000mm, tolerances as per ansi h35.2/ hal std.1250. alclad al.alloy plates, spec. 2014/2014 a-t6 /wp/t651, cladding 1050 a /1070 /19500/19700/6003 on both sides as per gr 24345-wp al.clad, is 736/al.clad 2014 ,astm b209/ d.t.d 5040 a/hal std 1250, th. thickness18.0 mm, min. size 1000x1000mm, tolerances as per ansi h35.2/ hal std.1250. al. alloy plate thickness12.7mm, temper t651, specification (6061,qq-a-250/11)/(6061,astmb209)/(ams4027)/(is 65032(hp20),is736)/(6061-bsh20,en 573-3/en 485-2)/(enaw6061, en573-3/en 485-2)/(uni9006/2,en573-3/en 485-2) / (din almg1sicu 3, 3211, en573-3 / en 485-2) size thickness 12.7 x 1200 x 1800 mm al. alloy plate thickness15.87mm, temper t651 specification (6061,qq-a-250/11) / (6061,astmb209) /(ams4027) / ( is 65032(hp20),is736)/(6061-bsh20,en 485-2/en 573-3)/(enaw6061, en573-3/en 485-2)/(uni9006/2,en573-3/en 485-2) /(din almg1sicu 3,3211,en573-3/en 485-2) size thickness 5/8 inch (15.875mm) x 4 feet x 6 feet al.alloy plate, temper t651 specification (6061,qq-a-250/11)/(6061,astmb209)/(ams4027)/ (is 65032(hp20),is736)/(6061-bsh20,en 485-2/en 573-3)/(enaw6061, en573-3/en 485-2)/(uni9006/2,en573-3/en 485-2) /(din almg1sicu 3,3211,en573-3/en 485-2/) size thickness 3/4 inch (19.05) mm x4 feet (1200 mm) x 6 feet (1800 mm) aluminium alloy plate, specification en 485-2, grade enaw6061, condition t6/t651 (or) specification is 736, grade 65032, condition wp (or) ams 4027 size thickness1 inch (25.4mm)x1250 x 2500 mm. aluminium alloy sheet, condition t6, specification enaw 6061, en 485-2, size thickness 2.5 mm x 1000 x 1000 mm. packing pvc coating of 50 microns thickness / any equivalent protective coating on both sides of sheet to prevent scratches. material aluminium alloy plate, condition t6/t651, specification enaw 6061, en 485-2, size thickness 6 mm x 1000 x 1000 mm. al alloy plate thickness 31.75 mm,temper t651, spec (6061,qq-a-250/11)/(6061,astmb209)/(ams4027)/(is 65032(hp20),is736)/(6061-bsh20,en 573-3/en 485-2)/(enaw6061, en573-3/en 485-2)/(uni9006/2,en573-3/en 485-2) /(din almg1sicu 3,3211,en573-3/en 485-2), size 31.75 x 1000 x 1000 mm material aluminium alloy plate, specification en 485-2, grade enaw6061, condition t6/t651 (or) specification is 736, grade 65032, condition wp (or) ams 4027 size thickness 35mm x 1250 x2500mm aluminium alloy plate, specification t6 , en 485-2, grade enaw6061,is 736, grade 65032, condition wp (or) ams 4027 size thickness 40mm x 1250 x2500mm al alloy plate thickness 48 mm, temper t651,spec (6061,qq-a-250/11)/(6061,astmb209)/(ams4027)/( is 65032(hp20),is736)/(6061-bsh20,en 573-3/en 485-2) /(enaw6061, en573-3/en 485-2)/(uni9006/2,en573-3,en 485-2) /(din almg1sicu 3,3211,en573-3/en 485-2), size 48 x 1000 x 1000 mm plate,aluminium alloy,6061,t651,8mm, ams 4027n thickness8x1000x1000mm , aluminium alloy sheet al-1100-h14 per qq-a-250/1, size - thickness0.13 x 350 x 350 mm, packing pvc coating of 50 microns thickness/ any equivalent protective coating on both sides of sheet to prevent scratches. aluminium alloy plate, condition t6, specification 6061-t6 per qq-a-250/11, size thickness 31.75 mm(1 1/4in) x,1000x1000 aluminium alloy plate, condition t651, specification 6061-t651 per qq-a-250/11,ams4027n size thickness 76.2 mm (3in) x1200x1200mm aluminium alloy plate, condition t7351, specification 7075-t7351 per ams-qq-a-250/12 plususq, size thickness 114.3 mm (4.5in) x700x650mm aluminium alloy plate, condition t651, specification 6061-t651 per ams4027n size thickness 57.15mm (2.25in) x1000x1000mm plate,aluminium alloy,specification 6061,condition t651,,ams-qq-a-250/11a(canc), thickness38.1 (1.5in)x1000x1000mm. plate, aluminium alloy, 6061, t651,size - thickness6.35 x 1000 x 1000mm, ams-qq-a-250/11a (canc.), aluminium alloy sheet 6061,t651/t6, size - thickness3x1000x2000mm, ams-qq-a-250/11a(canc) / bs en 485 -2 2008, packing pvc coating of 50 microns thickness / any equivalent protective coating on both sides of sheet to prevent scratches. aluminium alloy sheet, specification 6061, condition t6 51, ams 4027n size thickness 2mm x 1250 x2500mm with pvc coating of thickness 50 microns and above on both sides. aluminium alloy plate, condition t651, specification 6061-t651 per qq-a-250/11, size thickness 16 mm x1000 x 1000 mm. aluminium alloy plate thickness19.05mm, condition t651, specification 6061-t651 per qq-a-250/11, size thickness 19.05 mm x1000 x 1000 mm. aluminium alloy plate, condition t651, specification 6061-t651 per qq-a-250/11, size thickness (2.5in) 63.5 mm x1000 x 1000 mm. al alloy plate 6061 -t651, size thickness 8 x 1000 x 1000mm. feet aircraft quality feet aluminium alloy bare sheets con to ams-qqa-250/11. bar round,aluminium alloy,specification - 6061, condition -t6, extruded, ams-qq-a-200/8,size - dia 11.5 (7/16 in) x500mm bar round,aluminium alloy,specification 6061, condition t651,cold finish, ams-qq-a-225/8a(canc), p/n d 6061, t651,1.3/4in,44.5(1.75in) x 500mm bar round,aluminium alloy, specification - 6061,condition t651, cold finish, ams-qq-a-225/8a (canc) p/n d 6061, t651,2.1/2in,. 63.5 (2.5in) x500mm bar round aluminium alloy,specification - 6061, condition -t651,cold finish, ams-qq-a-225/8a (canc), dia 9.6 mm (3/8 in) x 500mm. al.alloy round dia 16 mm x 2 to 3 mtrs in length, temper t6511, spec (6061,qq-a-200/8)/(enaw6061,en573-3/en 755-2)/(is grade -65032(he20),is733)/(6061-bsh20,en 573-3/en 755-2)/(ams4150)/(6061,astmb221)/(din almg1sicu 3.3211, en573-3 /en 755-2)/(uni9006/2,en573-3/en 755-2) aluminium alloy round, spec aa2014-t652 , size dia 25 mm x 1000 mm aluminium alloy round, spec aa2014-t652 , size dia 70 mm x 1000 mm al alloy round cond t4, spec astm b316 grade aa2117, dia 5 mm x 2 to 3 mtrs in length al alloy round cond t4, spec astm b316 grade aa2117, dia 6 mm x 2 to 3 mtrs in length aluminium alloy plate, condition t651, specification almgsi1 or en aw-6082 as per nf en 485-1 and2, size thickness 10 x 1000 x 1000 mm. aluminium alloy plate, condition t651, specification almgsi1 or en aw-6082 . chemical composition is as per bs en 573-3 and mechanical properties are as per bs en 485-2, size thickness 3 x 1000 x 1000 mm. it should be protected with pvc coating morethan 50 microns on both sides. aluminium alloy plate, condition t651, specification almgsi1 or en aw-6082 as per nf en 485-1 and2, size thickness 44 x 1000 x 1000 mm. al.alloy plate 6061-t6, size - thickness12.75 (1/2in) x 1000 x 1000mm, ams-qq-a-250/11a al.alloy round 6061-t6, size - dia 6.35 ( dia 1/4 inch ) x 1000mm.extruded, ams-qq-a-200/8 aluminium wire conforming to is 739-1966, grade 19500, condition annealed, size dia 1.0mm x 2 to 3kg spools. one side/two sides polished(ra 0.2micro m) non-fading black electro coloured anodized ( as per mil-a-8625, type ii, class 2 ) sheet aluminium specification hal-1255 condition 3/4 hard or is737-19000-h6 size thickness 0.5 mm x 300mm x 300mm aluminium wire conforming to is 739-1966, grade 19500, condition annealed, size dia 2.0 mm or 14 swg (2.03 mm approx.) in 3 to 5 kg. spools. aluminium alloy sheet, 5052, h32, size - thickness2.0 (0.08in) x1000 x1000mm, ams-qq-a-250, packing pvc coating of 50 microns thickness / any equivalent protective coating on both sides of sheet to prevent scratches. aluminium alloy sheet 5052,h32, size - thickness3.175 x1000 x1000mm ,ams-qq-a-250/8b, packing pvc coating of 50 microns thickness / any equivalent protective coating on both sides of sheet to prevent scratches. aluminium alloy sheet, condition h111/o,specification en aw-5083 or ag4.5 or almg4.5mn as per bs en 573-3 and bs en 485-2, size thickness 2.0 mm x1250 x 2500 mm with pvc coating of thickness 50 microns and above on both sides. aluminium alloy sheet, specification enaw 5052,en573-3/en485-2/5052, qq-a-250/8,5052,astm b209 ,temper h32/h22 size 0.2 mm x 1000 mm x 1000 mm,packing pvc coating of 50 microns thickness / any equivalent protective coating on both sides of sheet to prevent scratches. aluminium alloy sheet, specification enaw 5052,en573-3/en485-2/5052, qq-a-250/8,5052,astm b209 ,temper h32/h22 size 0.5 mm x 1000 mm x 1000 mm,packing pvc coating of 50 microns thickness / any equivalent protective coating on both sides of sheet to prevent scratches. aluminium alloy sheet, specification enaw 5052,en573-3/en485-2/5052, qq-a-250/8,5052,astm b209 ,temper h32/h22 size 0.6 mm x 1000 mm x 1000 mm,packing pvc coating of 50 microns thickness / any equivalent protective coating on both sides of sheet to prevent scratches. aluminium alloy sheet,specification enaw 5052,en573-3/en485-2/5052, qq-a-250/8,5052,astm b209 ,temper h32/h22 size (0.03in) 0.8 mm x 1000 mm x 1000 mm,packing pvc coating of 50 microns thickness / any equivalent protective coating on both sides of sheet to prevent scratches. aluminium alloy plate, condition h111/o, specification en aw-5083 or ag4.5 (or) almg4.5mn as per bs en 573-3 and bs en 485-2, size thickness22 x 1000 x 1000 mm.

Related Sub Industries : Other Metal Products

List of bar Tenders

Tender for gem bids for chain link fence, angle iron and supports, ms flat iron, barbed wire, transportation and installation includingcement work

Tender for provision of digital printed laminated retro board with iron bar frame 1.0 inch x 1.0 inch square iron bar mounted on an acp base and framed with an aluminum channel, at shop nos.9, 9a, 10, 11, 11a, 14 and 34/kpa with a total quantity of 1300 sq.feet.

Tender for brass or phosphor bronze round and square and hollow bar and steel en8 bar

Get Bar Tender Alert...

Related Sub Industries : Other Metal Products

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us