Filters

List of plastic-tub Tenders

List of latest plastic-tub Tenders in Indian Tenders. Click on any plastic-tub Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for plastic-tub Tenders.

All-Tenders (62)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :35383137 | 30 Sep, 2025

Tender Value : 71.2 Thousand

New Delhi - Delhi

Tender for gem bids for financail, plastic crates with lid rigid solid side walled blue 600 400300, silicon tube transparent outer dia 5 8 mm inner dia 4 6mm length 20 m, bubble release air stone 1 5 inch pack of10, 3 way t joint air line connector for fish tank 100pcs pack, 2 way i joint air line connector for fish tank 100pcs pack, 4way x joint air line connector for fish tank 100pcs pack, hand net for aquarium 7 6 inch, kitchen press idiappammaker for feed preparation, hose pipe 30 m, double netsmall water strainer plastic filter with nylon mesh 20 cmlength 10 cm dia

Central Government/Public Sector

TRN :35384423 | 03 Oct, 2025

Tender Value : 47.52 Lacs

Agra - Uttar Pradesh

Tender for gem bids for mh, dermi marker pen sterile pack bone wax manual vaccumaspiration syringes disposable vascular tape red disposable vascular tape yellow bandage suspensoryscrotal disposable lap ports trocar optical 10mm gasports on off valve disposable lap ports trocar optical5mm gas ports on off valve polypropylene bluemonofilament 70 75cm 4 0 half circle rb 25 mm needle isopropanol 60 65 percentage and benzalkonium chloride skindisinfectant 63gm 025gm in 100gm apparatus oxygeninhalation portable tubing 1 meter with connector for apparatus oxygen portable light weight tubing 122 cmwhite mask adapter and bayonet connection for cathetersuction endobronchial with terminal transparent non toxicpvc tubing size fg 10 length 45 cm catheter suctionendobronchial with terminal transparent non toxic pvctubing size fg 12 length 50 cm catheter suctionendobronchial with terminal transparent non toxic pvctubing size fg 14 length 50 cm medium and highconcentration oxygen seethrough masks pvc with 7 ftoxygen supply tubing adult medium and highconcentration oxygen seethrough masks pvc with 7 ftoxygen supply tubing paediatric mapleson non rebreathingsystem bain circuit pressure monitoring line 100 cm 200cm male female tube endo tracheal oral nflatable cufftube pilot bag 50 mm internal diameter tube endotracheal oral inflatable cuff tube pilot bag 55 mm internaldiameter tube endo tracheal oral with inflatable cuff tubeand pilot bag 75 mm internal diameter tube endotracheal oral with inflatable cuff tube and pilot bag 80 mminternal diameter tube endo tracheal oral with inflatablecuff tube and pilot bag 90 mm internal diameter disposable sterile tourniquet bandage triangular lintabsorbent cotton tube feeding smooth plastic infant 38 bid number gem2025b6654001 dated 11-09-2025 bid document1 131 1 1 cm long 8f with red flexible connector for nasogastricfeeding, tube feeding smooth plastic infant 38 cm long 5fwith red flexible connector for nasogastric feeding, markingpen, aluminium foils, paediatric vol. admn set, foleyballoon three way 26 fr, ultrasound jelly bottle of 250 ml., extension tubing with three way stop cock 10 cms in length, glucostrips one touch select bott of 25 strips, glucostripsfor accucheck active bott of 50 strips, endotrachealtube pvc cuffed size 2, mucus sucker, swab sticks, disposable urinal female, disposable urinal male, paeditric urine collection bags, pencil cell aa, sheathprotective condom, body wipes pkt of 100 wipes, rifaximin 400 mg cap, silodosin 4mg tab, ipratropiumbromide respirator soln 500 mcg 2 ml respule, injondansetron 4 mg, cefixime syp 50 mg 5ml bott of 30 ml, ondansetron syp 2 mg 5ml in bott of 30 ml, ondansetron 8mg tab, natural micronised progesterone 200 mg tab, clobazam 5 mg tab, ear drop acetic acid 2 percentage bottof 10ml, tab methylergometrine 0.2 mg, zolpidem 10 mgtab, tab nifedipine retard 10 mg, mometasone nasalspray 0.1 percentage, tab mifepristone 25 mg, dinogest 2mg tab, fentanyl citrate 50 mcg ml 2 ml inj, vasopressin20 units ml inj 1ml ampoule, diltiazem 5mg ml inj, terlipressin 1mg plus 10ml diluent zero point 10mg ml, injthiamine 100 mg ml 2 ml amp, inj clindamycin 600 mg, tranexamic acid 500 mg 5ml inj, inj doxycycline 100 mg, inj ceftriaxone 1 gm plus salbuctam 500 mg plus disodiumadetate 37 mg, oint gentamycin 0.1 percentage tube of 15gm, lotion carbolic acid bott of 400 ml, formaldehyde 40percentage w v, hydrogen peroxide solution with stabilizerip 20 volume 500 ml bott, continuous glucose monitoringsystem free style libre sensor, tab tenofovir disoproxilfumarate 300 mg plus tab lamivudine 300 mg plus tabdolutegravir 50 mg, clindamycin 600 mg cap, lotchlorhexidine gluconate 2.5 percentage w v in ethyl alcohol70 percentage v v bott of 500ml, lma i gel size 4, i gelsize 5, disposable sterile nerve stimulator needle forregional anaesthesia size 21g 100mm length, microlaryngeal oral nasal tracheal tube cuffed s 5.00mm, microlaryngeal oral nasal tracheal tube cuffed s 6.00mm, supraglotic airway device lma bockbuster size 1, supraglotic airway device lma bockbuster size 2, supraglotic airway device lma bockbuster size 3, supraglotic airway device lma bockbuster size 4, supraglotic airway device lma bockbuster size 5, baskamask size 3, baska mask size 4, baska mask size 5, disposable buffet cap, opening pack containing sheetlarge 3 trolley cover 2 surgeon gown 4, lot povidoneiodine 10 percentage solution bottle opf 500ml, lotpovidone iodine 10 percentage solution bottle opf 100ml, 2propanol 45gm 1 propanol 30gm ethyl hexadecyl dimethylammonium ethyl sulphate 0.2gm with skin protectingsubstances 500ml bottle with dispenser, lot propanol 2 and1 propanol macetronium ethylsulphate 0.2 percentage45gm 30gm 10 100gm bottle of 500ml, liq formaldehyde40 percentage, lot povidone iodine 5 percentage bottle of100ml, lma i gel size 3, disposable sterile spinal needle26g adult, shi gowns operating hiv kit, bowle dick testpack for steam sterilisation, biological indicator geobacillus sterio thermophilus for steam sterilization, unglignocaine 2.5 percentage plus prilocaine 2.5 percentagetube of 30gm, betascrub lotion betadine 7.5 percentagewith surfactant bottle of 500ml, steam chemical integratorcomlpy sterigauge 3m 100 in each packet, disposable //bid details2 / 131 sterile bougie for difficult intubation adult size, disposablesterile bougie for difficult intubation neonate size, rapidplasma reagin test kit the kit contain i rpr antigensuspension ii positive control serum iii negative controlserum iv disposable plastic cards v disposable plasticdropper, widal latex test kit of 4 x 5ml, westergren tubefor esr disposable, ra factor 100 test, stool occult blood50 test, enterocheck kit 50 test, cover slip 22 x 50mm, crp latex test 5.0ml, multistic 10sg reagent strip for urineanalysis bottle of 100, uristicks strips albumin and glucosestrips 100 strips, ketostick bottle of 100 test, glass slide75 x 25mm, bio rad control l1 12 x 5 ml for biochemical, bio rad control l2 12 x 5 ml for biochemical, lipocheckdiabetic control, absolute alcohol bottle of 500ml, paraffinwax for histopath mp 50 degree c, xylene, acetone 1 x500ml, poly l lysine bottle of 50ml, rapid haematoxylinharris stain 1 x 500ml bottle, pulv lithium carbonate, stain phloxine bottle of 25gm, disc optochin, bacitracindisc 50 disc, rapid scrub typhus igg plus igm test of 20, leptospira igg and igm card test of 10, petri dish, acidsulphuricum sp. gravity 1.820 1.825, amyl alcohol, tourniquet, johnson and johnson band aid for use aftersample collection, aaa power cell, micro pipette tip for 500to 1000ml packet of 1000 tips, improved neubauercounting chamber, tissue paper roll, pas stain, highprofile blade, mac conkey agar, inj monoclonal, eye dropsdorzolamide 2 percentage plus timolol 0.5 percentagebottle of 5ml, eye drops bimatoprost 0.03 percentagebottle of 3ml, eye drops travoprost 0.004 percentage plustimolol 0.5 percentage bak plus 0.015 percentage withdrop tainer, eye oint sodium chloride 6 percentage w w, moxifloxacin hydrochloride 0.5 percentage plusdexamethsone 0.1 percentage ophthalmic solution bottleof 5ml, eye drops bromofenac 0.9mg ml bottle of 5ml, eyedrops nepafenac sodium 0.1 percentage, eye ointmoxifloxacin, eye drops azelastine 0.05 percentage bottleof 5ml, eye oint hypromellose 2 percentage, eye dropslatanoprost 0.005 percentage with dropper applicator, edsystane complete propylene glycol 0.6 percent polyquad0.001 percentage sorbitol oil heavy 1 percenthydropxypropyl gaur boric poyoxyl 40 sterate sorbitoltristerate editate disodium dimyristol, eye drops systanehydration sodium hyaluronate plus peg 400 plus pg, systane gel, eye drops ripasudil 0.4 percentageophthalmic solution bottle of 5ml, eye drops neetarsudilophthalmic solution 0.02 percentage bottle of 3ml, cap ofocular antioxident containing vitamin c 500mg vitamin e400 iu copper 2mg zinc 80mg luetin 10mg andzeaxantithin 2mg, cap i site vitamin c zinc l glutathionemangenese lutein copper selenium caretenoids betacarotene vitamin e acetate, eye gel genteal gel hpmc, eye drops levofloxacin ophthalmic solution, cooling eyepatch, evolve eye mask, cellulose sponge spears forophthalmic surgery pack of 5, wet amniotic membrane, amniotic membrane sheet dry sterile, adhesive patches foramblyopia for 10 years age, pfs pre filled syringehydroxy propyl methyl cellulose 1 percentagedermi marker pen sterile pack, bone wax, manual vaccumaspiration syringes, disposable vascular tape red, disposable vascular tape yellow, bandage suspensoryscrotal, disposable lap ports trocar optical 10mm, gasports on, off valve, disposable lap ports trocar optical5mm, gas ports on/off valve, polypropylene bluemonofilament 70-75cm size 4/0, circle rb 2, iso-propanol60-65% and benzalkonium chloride skin disinfectant 63gm, //bid details3 / 131

Central Government/Public Sector

TRN :35390274 | 22 Sep, 2025

Tender Value : 0

Kupwara - Jammu And Kashmir

Tender for gem bids for maint, bid number gem2025b6639110 dated 11-09-2025 bid document1 40 1 1 tower bolts ferrous metals as per is 204 q3, pvc flatcable, aluminium conductor with pvc insulation and sheathas per is 694 q3, mcb - miniature circuit - breakers fora.c. operation as per is / iec 60898 part 1 q2, propellertype ac ventilating fans - exhaust fans v2 as per is 2312q2, plastics bib taps pillar taps angle valves and stopvalves as per is 9763:2000 latest q3, towel rail / ringfor bathroom q3, metal alloy casting water tap withaerator v2 q3, pvc insulated unsheathed cable withflexible conductor as per is 694 q2, natural sand, pipeinsulation foam, wooden ballies of size 10 feet, cgi sheet10ft x 3ft long zero point 63mm thick, cgi sheet 12feet x3feet long zero point 63mm thick, cgi sheet ft x 3ft longzero point 63mm thick, ply wood 6ft x 3ft x 6 mm thick, plywood 6ft x 3ft x 12 mm thick, ply wood 8ft x 4ft x 6 mmthick, ratchet pipe threader dia 15 20mm, door handlesteel 8 inch, hand press gun, long iron picket, grinderbosch, water level pipe 30 mtr, bosch gsb 600 cordedclectric impact drill 600w motor, hand riverters 509mm, hand grinder blade 4 inch, hand grinder michine, slicon, cp stop cock 25mm, steel but hinges 75mm, hinges50mm, hinges 100 mm, pvc gate wall 15mm, ppr teereducer thread 20 to 15mm, ppr elbow thread 15mm, ppr elbow thread 20mm, ppr elbow thread 25mm, pprelbow reducer 20 to15mm, ppr socket 20mm, ppr socketreducer 20 to 15mm, reducer 15mm to 20 mm, ptmtpillar cock 20mm, ppr bib cock 15mm, bib cock withflange 20mm, ppr pipe 15mm dia, ppr pipe 25mm dia, ppr nipple 20mm 150mm long, pvc 4 inch dia bend, lbend 15mm, l bend 20mm, tap 20mm, pvc pipe 15mm, pvc water tap 20mm, tubing gi 15mm dia, ms doorspring rat rail, tubing gi 20mm dia, lime, lagging for gipipe 15mm dia, snowcerm cement paint white, tank coverpvc with locking arrangement for 1000 ltrs tank 3 layer, legging for gi pipe 20mm dia, plywood 8x4x6mm ost, pvc waste coupling sink 41x20x7mm, snowcerm cementpaint red, pvc elbow 110 mm, gi tubing wall hooks, 12mm thick plywood size 6ft x 3ft commercial bwr grade, foam cushion for sofa set size 555x530x 100mm 32 densityduly covered with velvette cloth, prelaminated particleboard 9x6x12mm exterior grade

Central Government/Public Sector

TRN :35375754 | 04 Oct, 2025

Tender Value : 0

Silvassa - Dadra And Nagar Haveli

Tender for gem bids for dental, molar bands with tubes 0022 slot band size 38 plus upperleft molar bands with tubes 0022 slot band size 38 plusupper right molar bands with tubes 0022 slot band size39 lower left molar bands with tubes 0022 slot band size39 lower right molar bands with tubes 0022 slot bandsize 39 upper left molar bands with tubes 0022 slot bandsize 39 upper right molar bands with tubes 0022 slotband size 39 plus lower right molar bands with tubes0022 slot band size 39 plus upper left molar bands withtubes 0022 slot band size 39 plus upper right molarbands with tubes 0022 slot band size 39 plus lower left molar bands with tubes 0022 slot band size 40 lower left molar bands with tubes 0022 slot band size 40 lower right molar bands with tubes 0022 slot band size 40 upper left molar bands with tubes 0022 slot band size 40 upperright molar bands with tubes 0022 slot band size 40 pluslower left molar bands with tubes 0022 slot band size 40plus lower right molar bands with tubes 0022 slot bandsize 40 plus upper left molar bands with tubes 0022 slotband size 40 plus upper right molar bands with tubes0022 slot band size 41 lower left molar bands with tubes0022 slot band size 41 lower right molar bands withtubes 0022 slot band size 41 upper left molar bands withtubes 0022 slot band size 41 upper right molar bandswith tubes 0022 slot band size 41 plus lower left molarbands with tubes 0022 slot band size 41 plus lower right molar bands with tubes 0022 slot band size 41 plus upperleft molar bands with tubes 0022 slot band size 41 plusupper right molar bands with tubes 0022 slot band size42 lower left molar bands with tubes 0022 slot band size42 lower right molar bands with tubes 0022 slot bandsize 42 upper left molar bands with tubes 0022 slot bandsize 42 upper right molar bands with tubes 0022 slot bid number gem2025b6666009 dated 12-09-2025 bid document1 151 1 1 band size 42 plus lower left, molar bands with tubes 0.022slot band size 42 plus lower right, molar bands with tubes0.022 slot band size 42 plus upper left, molar bands withtubes 0.022 slot band size 42 plus upper right, mylarstrips 1x200 strips per pkt, niti rcs wire 0.016x0.0022 l1x10 per pkt, niti rcs wire 0.016x0.0022 u 1x10 per pkt, niti wire 0.012 l 1x10 per pkt, niti wire 0.012 u 1x10 perpkt, niti wire 0.014 l 1x10 per pkt, niti wire 0.014 u 1x10per pkt, niti wire 0.016 l 1x10 per pkt, niti wire 0.016 u1x10 per pkt, niti wire 0.016x0.022 u 1x10 per pkt, nitiwire 0.016x0.022 l 1x10 per pkt, non perforated andperforated trays for complete denture upper and lower, orthophosphoric acid, pain off solution 20ml, paper pointf1 1 x 200 pieces per pkt, paper point f2 1 x 200 piecesper pkt, paper point f3 1 x 200 pieces per pkt, periodontalbone graft, periodontal pack, polishing brush, polishingpaste for dental use, powder calcium hydroxide, protaperfiles rotary f1 21mm, protaper files rotary f1 25mm, protaper files rotary f2 21mm, protaper files rotary s121mm, protaper files rotary s1 25mm, protaper filesrotary s2 21mm, protaper files rotary s2 25mm, protaperfiles rotary sx 19mm, protaper files rotary f2 25mm, protaper files rotary f3 21mm, protaper files rotary f325mm, protaper files rotary f4 21mm, protaper filesrotary f4 25mm, protaper files rotary f5 21mm, protaperfiles rotary f5 25mm, protapers hand f1 21mm 1x6 pieceper pkt., protapers hand f1 25mm 1x6 piece per pkt., protapers hand f2 21mm 1x6 piece per pkt., protapershand f2 25mm 1x6 piece per pkt., protapers hand f321mm 1x6 piece per pkt., protapers hand f3 25mm 1x6piece per pkt., protapers hand f4 21mm 1x6 piece per pkt., protapers hand f4 25mm 1x6 piece per pkt., protapershand f5 21mm 1x6 piece per pkt., protapers hand f525mm 1x6 piece per pkt., protapers hand s1 21mm 1x6piece per pkt., protapers hand s1 25mm 1x6 piece per pkt., protapers hand s2 21mm 1x6 piece per pkt., protapershand s2 25mm 1x6 piece per pkt., protapers hand sx19mm 1x6 piece per pkt., rapid repair self cure acrylicresin powder plus liquid, resin luting cement with gun11gm, retraction cord 0, 00, 000, root canal sealerpowder and liquid sure seal, rubber bowl big size, rubberbowl small size, rvg sleeves 500 pieces per pkt, s.s wire0.016 x 0.022 upper 1x10 per pkt, s.s wire 0.016 x 0.022upper rcs 1x10 per pkt, s.s wire 0.016x0.022 lower 1x10per pkt, s.s wire 0.016x0.022 lower rcs 1x10 per pkt, s.s wire 0.017x0.025 upper 1x10 per pkt, s.s wire0.019x0.025 upper 1x10 per pkt, s.s wire 0.17x0.025lower 1x10 per pkt, s.s wire 0.19x0.025 lower 1x10 perpkt, sectional tray plastic, separators large loose pack of1000, shade guide class a1-d4, stainless steel crownprimary kit, suction tips disposable for dental 1 pkt x100pcs, surgical round burs hp-10, hp-08 carbide bur, teethset a2 size 13-6, 14-8, 15-12, 18-4, teethset a1 size13-5, 14-3, 15-5, 18-2, temporary crown and bridgematerial, temporary restorative cement, temporaryrestorative cement coltosol 38gm, tofflemire retrainer, transbond xt-3m adhesive, transbond xt-3m primer, transperant strips for composite restoration, trayadhesive, tungsten carbide trimmers set, ultrasonic scalertip - surface scaling tip g2, ultrasonic scaler tips -interdental g4, ultrasonic scaler tips -universal g1, wooden wedges 1x 100 pieces per pkt, zinc oxideeugenol cement powder 50gm and liquid 15ml, zinc oxideimpression paste 125 gm plus 85 gm, zinc oxide powder //bid details2 / 151 gm, zinc phosphate cement powder 35gm and liquid15ml, zoe mixing pad, novabone putty bone graft 0.25cccatridge 1ccpack, novabone porous granules 0.25gm per0.5cc, fix guide membrane size 6mm gir 15x10mm, fixguide membrane size 6mm gir 15x25mm, fix guidemembrane size 6mm gir 25x25mm, patient drape, metallic suction tip, rubber dam, air rotar cutting bursround small 1x5 piece per strip., air rotar cutting burstapered small 1x5 piece per strip., air rotar cutting bursround medium 1x5 piece per strip., air rotar cutting bursround large 1x5 piece per strip., air rotar cutting bursstraight medium 1x5 piece per strip., air rotar cutting burstaprered large 1x5 piece per strip., air rotar cutting burstaprered medium 1x5 piece per strip., air rotar diamondburs cr-22f 299 per 013 pkt of 5, air rotar diamond bursfo-32 257 per 018 pkt of 5, air rotar diamond burs sf11 1strip 1x5 pieces, air rotar diamond burs sf12 1 strip 1x5pieces, cavity varnish, composite restoration kit allshades packable a1, a2, a3 a 3.5, b1, crown and bridgepreparation kit, crown preparation bur contact breaker, denture cutting burs conical, denture cutting burscylindrical, denture cutting burs straight, diamond burs197 per 016 tr-21 pkt of 5, diamond burs 199 per 016 cr-22f pkt of 5, diamond burs 199 per 016 ex-18f pkt of 5, diamond burs 199 per 016 tf-12ef pkt of 5, diamond burs199 per 016 tf-21ef pkt of 5, diamond burs 199 per 016tr-12 pkt of 5, diamond burs 288 per 014 so-21 pkt of 5, diamond burs 288 per 016 fo-32 pkt of 5, diamond bursiso 173 per 018 tf-13, diamond burs iso 198 per 018 tr-13f, files flexifiles no.15-40 25mm, files flexifiles no.45-80 25mm, files flexifiles no.8 25mm, flame shaped acrylictrimmers cross cut, flexi files no.15-40 21mm, flowableglass ionomer cement, k file no 15-40 25mm 1x6 pic perpkt, k files no.08 21mm 1x6 pic per pkt, k files no.15-4021mm 1x6 pic per pkt, lab wires 19 guage spool, modernmolar band roll, pin accale tracing stick, root canalsealer base and catalyst paste, rotary files 25 per 621mm, rotary protaper files sx 25mm, rpd trays plasticperforated u0-u4 and lo-l4, shoulder preparation burs 173per 014 tf 11 pkt of 5, shoulder preparation burs 173 per016 tf 12 pkt of 5, ultra rock dental stone 3kg class iii, crown remover kit, r.c seal, handpiece spray fordental, root canal seal for apexificationof rootcanalsmolar bands with tubes 0.022 slot band size 38+ upperleft, molar bands with tubes 0.022 slot band size 38+upper right, molar bands with tubes 0.022 slot band size 39lower left, molar bands with tubes 0.022 slot band size 39lower right, molar bands with tubes 0.022 slot band size 39upper left, molar bands with tubes 0.022 slot band size 39upper right, molar bands with tubes 0.022 slot band size39+ lower right, molar bands with tubes 0.022 slot bandsize 39+ upper left, molar bands with tubes 0.022 slotband size 39+ upper right, molar bands with tubes 0.022slot band size 39+lower left, molar bands with tubes 0.022slot band size 40 lower left, molar bands with tubes 0.022slot band size 40 lower right, molar bands with tubes 0.022slot band size 40 upper left, molar bands with tubes 0.022slot band size 40 upper right, molar bands with tubes 0.022slot band size 40+ lower left, molar bands with tubes0.022 slot band size 40+ lower right, molar bands withtubes 0.022 slot band size 40+ upper left, molar bandswith tubes 0.022 slot band size 40+ upper right, molarbands with tubes 0.022 slot band size 41 lower left, molarbands with tubes 0.022 slot band size 41 lower right, molar //bid details3 / 151

State Government

TRN :35375838 | 25 Sep, 2025

Tender Value : 0

Mumbai - Maharashtra

Tender for gem bids for allopathic, bid number gem2025b6666060 dated 10-09-2025 bid document1 88 1 1 pantoprazole inj. 4mg per ml, ondansetron inj i.p 2mg perml, pheniramine maleate inj. 22.75 mg per ml, paracetamol inj.l50mg per ml, inj. paracetamol iv 1gm 100ml, inj. amoxycillin plus clavunic acid plus amoxycillinsodium clavuanic acid, ceftriaxone inj. 1000mg, cefotaxime inj. 1000mg, tetanus toxoid, sodium chloridenormal saline 0.9 percent inj. i.v. 500ml, sodium chloride -normal salin ef 9percent inj.i.v. 100ml, inj.ceftriaxone andsulbactam 1.5g, inj diclofenac soudium, inj hyoscinebutylbromide, inj artesunate 60 mg, inj tranexemic acid500 mg, inj metronidazole i.v. 100ml, sodium chloride anddextrose i.v. 500ml dns, piperacillin plus tazobactum forinjection ups 4 gm plus 500 mg, pantoprazoletab 40 mg, paracetamol tab 500mg, paracetamol tab 650mg, tabdiclogenac plus potassium plus paracetamol plusserratiopeptidase, tab motelukast sodium phosphate ip, diclofenac gel 30gm, povidone iodine ointment 15gm, surgical spirit b.p. 500ml, povidone iodine 5 percentsolution, betadine scrub, syrup paracetamol 125 mg, syrup paracetamol 250 mg, paracetamol drops 100 mg, vitamin d drops 400 iu, syrup calcium 50 mg, syrupmultivitamin, syrup albendazole 200 mg, syrup ondem4mg, syrup azithromycin 100 mg, syrup cefpodoxime 100mg, syrup cefixime 100 mg, syrup levosalbutamol plusambroxol uniphore 1 mg, colimex-df drops, syrup zn 20, oral rehydration salt powder 20.5mg sachet, electrolpowder, probiotic sachet, disposable plastic appron, disposable faee mask, disposable scalp vein set no. 22, disposable scalp vein set no. 23, disposable syringe 2ml, disposable syringe 5ml, disposable syringe 10ml, disposable syringe 100 ml, disposable delivery kit, disposable needle no. 18, disposable needle no. 21, disposable needle no. 22, disposable needle no. 23, disposable needle no. 24, disposable needle no. 26, disposable plastic gloves, disposable bed sheet, ecg eeggel, adhesive plaster cotton based, elastic adhesive tape, bandage cloth as per schedule f- ii than, i.v.cannula 22 g, i.v.sets with hypodermic needle 21 g of 1.5 inch length, infant feeding tube no. 7, infant feeding tube no.8, surgical rubber gloves 6, surgical rubber gloves 6.5, surgical rubber gloves 7, examination gloves small, examination gloves mediuim, examination gloves large, polypropylene mesh with double bar knitted contrsuctionpore, i.v.cannula 24, i.v.cannula 26, sterile plastic sheetsadult, sterile absorbent sheet for new born, dispsosablesterile drape, metrogyl-p 2 percent, vdrl kit 1x 100 test, widal kit 4x5 ml, r a kit 1x50 test, antiseptic liquid, urine strips multistrips 11 parameters, mp kits 1x50 test, edta vaccutainer tubes, plain vaccutainer tubes, fluoridevaccutainer tubes, vaccutainer needles, hbsag kit, antiabd reagent kit, stool container, dengure ns1 antigenkit, intra cathter no.20, three way, rubber catherterno.10, eye pad, gallant blade, ethilon 3-0, ethilon 2-0, ethilon 4-0, gauze, sterillium, disposable plastic tubes10ml, cotton bundle, lab clean //bid details2 / 88

Central Government/Public Sector

TRN :35377294 | 22 Sep, 2025

Tender Value : 0

Bangalore - Karnataka

Tender for gem bids for industrial rubber gloves medium, face mask n 95, tubelevel plastic - 6mm dia, brick line nylon 2mm, woodenfloat size length1feet 6 inch x breath 8 inch, plasteringsponge - size 17cm x 11cm x 7 cm, measuring tape 5 mtr, open cage hesco bags, drum plastic 200ltr, kerb blockmould size 2 x 1 feet, interlocking block mould size l300mm x b 190 mm x h 60 mm rubber, binding wire 22swg, white cement, rebar tying wire, granite polishblade, granite molding blade, core cutter bit 12mm to32mm each size x 1 pkt, water proofing compound, electric tile cutter

Central Government/Public Sector

TRN :35379433 | 20 Sep, 2025

Tender Value : 1.99 Lacs

Leh - Ladakh

Tender for gem bids for purchase, coller 90 ltr, table cloth white, plastic tub large, plasticchair with arms, register 250 pages

corporations/Associations/Others

TRN :35379519 | 25 Sep, 2025

Tender Value : 14.55 Lacs

Balasore - Orissa

Tender for earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the engineer-incharge. filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the engineer-incharge. cement concrete (1:4:8) with 4cm size h.g.b. hand broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement t&p required etc. complete as per the direction of the engineer-incharge. brick work with fly ash brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the engineer-incharge. 12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. r.c.c. work in c.c. (1:2:4) including hoisting & laying & curring for 28 days using 12mm. size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. "rigid smooths centering and shuttering for rcc works including false work and dismentgalling then after casting including cot os materials complete. (a) rcc walls and fins including attached pillasters" labour charge for m.s. reinforcement for r.c.c. work including cutting, bending & typing the grills & placing in position including cost of binding wire 18 to 20 guage per qntl. including cost of hysd still bar (fe 415/ fe 500) filling the foundation and plinth with excavated material as directed by the engineer-incharge. finishing wall with water proofing cement paint of approved shade two coats to new work to give an even shade including cost of cement paints. etc. complete as per the direction of engineer – in charge. writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the engineer-incharge. supplying of 160 mm dia unplasticised rigid upvc pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies conforming to is - 4985 / 2000 of bis - amendment - 2 read with table - 1 of is - specification bearing isi marks for working pressure ci - i upvc pipe to withstand pressure of 2.5 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest amendment of is - 4985. it includes the cost of sockets in case of plain ended pipe. pdi test ( both pre & post inspection ) are to be condcuted and should be marked on body of each pipe and report is to be obtained from cipet, bhubaneswar necessary approval of authority including transportation to work site in complete shape. fitting of un plasticised 160mm dia pvc pipe for following inside dia mtr. for all classes of pipe including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of pvc tee for outlet and pvc shaddle and pvc riser nipple for fitting air valve, equal tee etc. complete including conveyance pipe from village to worksite and testing of pipe line etc. complete as per the direction of the engineer-incharge. 7.5 hp / 5.6 kw submersible pumpset corpled with totally enclosed water cooled squirrel case induction motor with delivery discharge 1100 lpm at 36 meter head with s/s cable, clamp clip etc. suitable for operation at 415v + -15%, 3 phase 50hz a.c. power supply as per particulars in annexure. labour charges for installation of 7.5hp motor including fitting & fixing of base frame, fitting & fixing suction and delivery pipe to motor, nr valve, foot valve, sluice valve and other fitting materials including cutting, welding and construction of supporting pillar etc. complete as per the direction of the engineer-incharge. 100 mm ø nominal bore g.i. pipe having wall thickness 4.5 mm electrical resistance welded of medium class confirming to is - 1239 (pt-1 of 2004) with socketed at one end and the other end protected with plastic thread protector. the socket confirming to is-1239 (pt-ii/1992) with latest amendmewnts in random length of 4 to 7 mtrs. each pipe should bear isi certification & manufacturers name / trade mark. 100 mm dia g.i. bend is no.1239(part-ii/1992) 100 mm dia g.i. flange is no.6392 / 1971 cost of tw safe guard for stand includng labour charge 100mm dia gi socket is 1239 (part-ii/1992 ) cost of 100 mm dia ms t/w clamp cost of 100 mm dia c.i reflux valve(nr) 160 mm x 160 mm x 160 mm ø pvc equal tee (w.p. 4 kgf/cm2) confirming to is-4995/1988 with latest ammendment 160 mm ø pvc end cap (w.p. 10 kgf/cm2) confirming to is-4995/1988 with latest ammendment 5/8 x3" nut bolt & foundation nut bolt as per is specification 1/8" thick rubber insertion as per is specification cost, supplying of 160mmx160mmx110mm dia weldless g.i.tee (3.6mm thickness) with bend, closing and opening arrangement of reputed brand including all cost, conveyance, cess etc complete but excluding cost of gst cost of 160mm×110mm dia pvc reducing socket. cost of 12 mm wire rope control pannel with automatic star delta starter, sheet steel enclosure suitable for operation of squirrel cage induction motor up to 10 hp with 16 amp (ac -3) duty contractor at 415 volt+6%-15%, 3 phase, 50 hz ac supply with over load relay range 6.00 to 9.50 amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 v. the starter should provide dependable protection against over load and single phasing fitted with volt meter,ameter,mcb in complete shape including indicator lamp 63 amp main switch triple pole & neutral of voltage range 440 volt of re-wirable fuse and shall confirm to is 4064 part i & with isi mark. 3 x 10 sqmm tarpodar cable xlpe (cross link polyethylin) conforming to is: 7098 (part-ii) including laying below .9mtr. of the ground and filling the excavated materials including watering and ramming. cost of empty outdoor irrigation panel board (size 0.45mx0.25mx1.20m) of 18 swg (cold rolled) m.s. sheet with one coat of red oxid primer and two coats of smoke gray / navey blue enemel paint on both side ( inside & outside) suitable to mount 3 phase starter, main switch and capacitor inside the pannel board vertically over 18 swg m.s. sheet. the pannel board should be provided with locking arrangement and have grover on rear side for fixing motor hood. the danger board should be fixed on the to of the pannel door. 2.50mm2 submerssible (3 core) flat cable isi mark of reputed brand of isi specification including all cost, conveyance, cess etc complete but excluding cost of gst construction of 3 phase 11 kv line as per rec standard confirming to ie rules 1956 with 300 kg 9 m long psc pole with 80 sqmm aaac , 11 kv "v" cross arm, with required no.of 11 kv t & c disc. insulators in tension point & 11 kv pin insulators, couping & padding of poles. danger board at each pole, anti climbing devices, stay set at bending point & double stay at end point with 18 mm g.i.h.t.stay, concreting of stay with anchor plate, guarding at road crossings etc. including cost of all materials, labour transportation,inspection & commissioning etc. complete. construction and erection of 11 /0.4 kv , 25 kva double pole mounted substation star rated confirming to re rules 1956, mounted on 2.44 mtr. long structure, supported in 300 kg 9 mtr long psc pole,transformer hard channel & top channel made of 2.8 m long 100 x 50 x 6 mm m.s.channel, transformer belting on 2.80 m long 50 x 50 x 5 mm m.s.angle, (all rec spn std.f-3) with all accessories like 3 pole 11 kv hg fuse(f-5)& a.b.switches(f-9) both mounted on 2.8 m long 75 x 40 x 6 mm m.s.channel and supported by 1.0 m long 50 x 50 x 5 mm m.s.angle, with 3 no. 11 kv lightening arrestors & distribution box for 25 kva s/s, g.i.pipe earthing with 25x5mm g.i.flats including cost of 25 kva 11/0.4 k.v.transformer , 35 sqmm 3 1/2 core pvc cable - 40 mtr couping & padding of poles, danger board at each pole, anti climbing devices & all other necessary fittings i.e required size nuts & bolts, brackets, cable, cable sockets, barbed fencing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. construction of boundry wall fancing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc for substation as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. electrical installation with electrical materials such as pvc tape, ampere tape, 7/20 pvc copper wire, 3/20 pvc copper wire, g.i. flexible conduite pipe, no.6 g.i. wire, copper cable socket, g.i. socket and flange and petty materials required for electrical installation including fixing of td cable inside the earth trench as per direction of engineer-in-charge.. electrical earthing with digging earth pit of size (2 ft x 2 ft x 3 ft ) and using 1/2 '' g.i pipe ,no -6 g.i wire ,cable socket ,flange , carcoal, salt etc. as per the direction of the engineer-incharge. 4 kvr power shunt capasitor 4.0 mm 2 pvc single core copper wire labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level in alluvial soil strata by mud rotary rig drilling as required to suit the site condition as per the direction of engineer in charge including use of own rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of finished bore suitable for lowering (minimum 400 mm dia.) of 200mm dia gi/pvc pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. gi/pvc casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion. for drilling of 200 (8”) dia pipe. from 0 mtr. to 100th meters supply of all labour & t&p for lowering the following sizes of pvc pipes with or without slotted pipes as per the necessity from ground level & fitted & fixed up in perfectly verticaly position inlcuding cutting & threading pipe and slotted pipe and fixing all jointing materials etc. complete. and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above excluding cost of fitting & joining materials. 200mm dia pvc/gi casing pipes cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour as per the direction of engineer-in-charge. supplying all materials,labour t & p for packing the bore with washed gravel size (p-6) arround the well screen and pipes in good quality including cost of gravel ,conveyance,royality,etc complete as per direction engineer-in-charge. (100m depth) =0.786 x (0.4² - 0.2²) x 100mtr = 9.43 say 9.5 cum supplying all labour tools ,plant and grouting with cement bentonite slurry for saline sealing in the bore arround 200mm dia pvc casing pipe etc all complete as per direction of engg in charge(including cost of cement and bentonite) labour charges for cutting transverse slot on 200 mm dia pvc pipe with slot size 1.5 mm as per specification threading charges 8" pvc bail plug 8" pvc threaded end cap pn-10 200mm x 12" long pvc shot piece 200mm ø schedule 80 casing pipe (as per epm rate order no.2877 dated 05.07.2025) water sample test if required

corporations/Associations/Others

TRN :35379561 | 25 Sep, 2025

Tender Value : 14.60 Lacs

Balasore - Orissa

Tender for earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the engineer-incharge. filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the engineer-incharge. cement concrete (1:4:8) with 4cm size h.g.b. hand broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement t&p required etc. complete as per the direction of the engineer-incharge. brick work with fly ash brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the engineer-incharge. 12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. r.c.c. work in c.c. (1:2:4) including hoisting & laying & curring for 28 days using 12mm. size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. "rigid smooths centering and shuttering for rcc works including false work and dismentgalling then after casting including cot os materials complete. (a) rcc walls and fins including attached pillasters" labour charge for m.s. reinforcement for r.c.c. work including cutting, bending & typing the grills & placing in position including cost of binding wire 18 to 20 guage per qntl. including cost of hysd still bar (fe 415/ fe 500) filling the foundation and plinth with excavated material as directed by the engineer-incharge. finishing wall with water proofing cement paint of approved shade two coats to new work to give an even shade including cost of cement paints. etc. complete as per the direction of engineer – in charge. writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the engineer-incharge. supplying of 160 mm dia unplasticised rigid upvc pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies conforming to is - 4985 / 2000 of bis - amendment - 2 read with table - 1 of is - specification bearing isi marks for working pressure ci - i upvc pipe to withstand pressure of 2.5 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest amendment of is - 4985. it includes the cost of sockets in case of plain ended pipe. pdi test ( both pre & post inspection ) are to be condcuted and should be marked on body of each pipe and report is to be obtained from cipet, bhubaneswar necessary approval of authority including transportation to work site in complete shape. fitting of un plasticised 160mm dia pvc pipe for following inside dia mtr. for all classes of pipe including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of pvc tee for outlet and pvc shaddle and pvc riser nipple for fitting air valve, equal tee etc. complete including conveyance pipe from village to worksite and testing of pipe line etc. complete as per the direction of the engineer-incharge. 7.5 hp / 5.6 kw submersible pumpset corpled with totally enclosed water cooled squirrel case induction motor with delivery discharge 1100 lpm at 36 meter head with s/s cable, clamp clip etc. suitable for operation at 415v + -15%, 3 phase 50hz a.c. power supply as per particulars in annexure. labour charges for installation of 7.5hp motor including fitting & fixing of base frame, fitting & fixing suction and delivery pipe to motor, nr valve, foot valve, sluice valve and other fitting materials including cutting, welding and construction of supporting pillar etc. complete as per the direction of the engineer-incharge. 100 mm ø nominal bore g.i. pipe having wall thickness 4.5 mm electrical resistance welded of medium class confirming to is - 1239 (pt-1 of 2004) with socketed at one end and the other end protected with plastic thread protector. the socket confirming to is-1239 (pt-ii/1992) with latest amendmewnts in random length of 4 to 7 mtrs. each pipe should bear isi certification & manufacturers name / trade mark. 100 mm dia g.i. bend is no.1239(part-ii/1992) 100 mm dia g.i. flange is no.6392 / 1971 cost of tw safe guard for stand includng labour charge 100mm dia gi socket is 1239 (part-ii/1992 ) cost of 100 mm dia ms t/w clamp cost of 100 mm dia c.i reflux valve(nr) 25 mm ø air release valve with saddle & raiser pipe. the air release valve shall confirm to is 14845 with isi mark. 160 mm x 160 mm x 160 mm ø pvc equal tee (w.p. 4 kgf/cm2) confirming to is-4995/1988 with latest ammendment 160 mm ø pvc end cap (w.p. 10 kgf/cm2) confirming to is-4995/1988 with latest ammendment 5/8 x3" nut bolt & foundation nut bolt as per is specification 1/8" thick rubber insertion as per is specification cost, supplying of 160mmx160mmx110mm dia weldless g.i.tee (3.6mm thickness) with bend, closing and opening arrangement of reputed brand including all cost, conveyance, cess etc complete but excluding cost of gst cost of 160mm×110mm dia pvc reducing socket. cost of 12 mm wire rope control pannel with automatic star delta starter, sheet steel enclosure suitable for operation of squirrel cage induction motor up to 10 hp with 16 amp (ac -3) duty contractor at 415 volt+6%-15%, 3 phase, 50 hz ac supply with over load relay range 6.00 to 9.50 amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 v. the starter should provide dependable protection against over load and single phasing fitted with volt meter,ameter,mcb in complete shape including indicator lamp 63 amp main switch triple pole & neutral of voltage range 440 volt of re-wirable fuse and shall confirm to is 4064 part i & with isi mark. 3 x 10 sqmm tarpodar cable xlpe (cross link polyethylin) conforming to is: 7098 (part-ii) including laying below .9mtr. of the ground and filling the excavated materials including watering and ramming. cost of empty outdoor irrigation panel board (size 0.45mx0.25mx1.20m) of 18 swg (cold rolled) m.s. sheet with one coat of red oxid primer and two coats of smoke gray / navey blue enemel paint on both side ( inside & outside) suitable to mount 3 phase starter, main switch and capacitor inside the pannel board vertically over 18 swg m.s. sheet. the pannel board should be provided with locking arrangement and have grover on rear side for fixing motor hood. the danger board should be fixed on the to of the pannel door. 2.50mm2 submerssible (3 core) flat cable isi mark of reputed brand of isi specification including all cost, conveyance, cess etc complete but excluding cost of gst cost of wiring of pump chamber construction of 3 phase 11 kv line as per rec standard confirming to ie rules 1956 with 300 kg 9 m long psc pole with 80 sqmm aaac , 11 kv "v" cross arm, with required no.of 11 kv t & c disc. insulators in tension point & 11 kv pin insulators, couping & padding of poles. danger board at each pole, anti climbing devices, stay set at bending point & double stay at end point with 18 mm g.i.h.t.stay, concreting of stay with anchor plate, guarding at road crossings etc. including cost of all materials, labour transportation,inspection & commissioning etc. complete. construction and erection of 11 /0.4 kv , 25 kva double pole mounted substation star rated confirming to re rules 1956, mounted on 2.44 mtr. long structure, supported in 300 kg 9 mtr long psc pole,transformer hard channel & top channel made of 2.8 m long 100 x 50 x 6 mm m.s.channel, transformer belting on 2.80 m long 50 x 50 x 5 mm m.s.angle, (all rec spn std.f-3) with all accessories like 3 pole 11 kv hg fuse(f-5)& a.b.switches(f-9) both mounted on 2.8 m long 75 x 40 x 6 mm m.s.channel and supported by 1.0 m long 50 x 50 x 5 mm m.s.angle, with 3 no. 11 kv lightening arrestors & distribution box for 25 kva s/s, g.i.pipe earthing with 25x5mm g.i.flats including cost of 25 kva 11/0.4 k.v.transformer , 35 sqmm 3 1/2 core pvc cable - 40 mtr couping & padding of poles, danger board at each pole, anti climbing devices & all other necessary fittings i.e required size nuts & bolts, brackets, cable, cable sockets, barbed fencing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. construction of boundry wall fancing ( size (15'x10') with constn. of retaining wall, erection of rcc fencing post , sand filling and metal spreading ,fixing of iron grill gate etc for substation as per cesu specification etc. including cost of all materials, labour , transportation complete with liasioning for testing inspection & commissioning. electrical installation with electrical materials such as pvc tape, ampere tape, 7/20 pvc copper wire, 3/20 pvc copper wire, g.i. flexible conduite pipe, no.6 g.i. wire, copper cable socket, g.i. socket and flange and petty materials required for electrical installation including fixing of td cable inside the earth trench as per direction of engineer-in-charge.. electrical earthing with digging earth pit of size (2 ft x 2 ft x 3 ft ) and using 1/2 '' g.i pipe ,no -6 g.i wire ,cable socket ,flange , carcoal, salt etc. as per the direction of the engineer-incharge. 4 kvr power shunt capasitor 4.0 mm 2 pvc single core copper wire labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level in alluvial soil strata by mud rotary rig drilling as required to suit the site condition as per the direction of engineer in charge including use of own rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of finished bore suitable for lowering (minimum 400 mm dia.) of 200mm dia gi/pvc pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. gi/pvc casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion. for drilling of 200 (8”) dia pipe. from 0 mtr. to 100th meters supply of all labour & t&p for lowering the following sizes of pvc pipes with or without slotted pipes as per the necessity from ground level & fitted & fixed up in perfectly verticaly position inlcuding cutting & threading pipe and slotted pipe and fixing all jointing materials etc. complete. and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above excluding cost of fitting & joining materials. 200mm dia pvc/gi casing pipes cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour as per the direction of engineer-in-charge. supplying all materials,labour t & p for packing the bore with washed gravel size (p-6) arround the well screen and pipes in good quality including cost of gravel ,conveyance,royality,etc complete as per direction engineer-in-charge. (100m depth) =0.786 x (0.4² - 0.2²) x 100mtr = 9.43 say 9.5 cum supplying all labour tools ,plant and grouting with cement bentonite slurry for saline sealing in the bore arround 200mm dia pvc casing pipe etc all complete as per direction of engg in charge(including cost of cement and bentonite) labour charges for cutting transverse slot on 200 mm dia pvc pipe with slot size 1.5 mm as per specification threading charges 8" pvc bail plug 8" pvc threaded end cap pn-10 200mm x 12" long pvc shot piece 200mm ø schedule 80 casing pipe (as per epm rate order no.2877 dated 05.07.2025) water sample test if required

corporations/Associations/Others

TRN :35379659 | 25 Sep, 2025

Tender Value : 14.99 Lacs

Balasore - Orissa

Tender for earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the engineer-incharge. filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the engineer-incharge. cement concrete (1:4:8) with 4cm size h.g.b. hand broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement t&p required etc. complete as per the direction of the engineer-incharge. brick work with fly ash brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the engineer-incharge. brick work with fly ash bricks 25cm x 12cm x 8cm size having crushing strength not less than 75 kg/cm2 with dimensional tolerance ±8 percent in cement mortar (1:6) in superstructure per cum etc. complete as per the engineer-incharge. 12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. r.c.c. work in c.c. (1:2:4) including hoisting & laying & curring for 28 days using 12mm. size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. 2.5 cm a.s. flooring with c.c. (1:2:4) using 12mm size black hard granite crusher broken chips of approve quality for approve quorry including water and curring with cost taxes royalty and conveyance charges of all material to the worksite and supply of all labour and t&p required for the work etc complete as directed by the engineer-incharge. "rigid smooths centering and shuttering for rcc works including false work and dismentgalling then after casting including cot os materials complete. (a) rcc walls and fins including attached pillasters" b) chajja/roof slab c) lintel d) rcc beams, culumns, grider & bressers etc e) rcc foundation an footing beases of columns etc. dry brick rammed khoa (10 cm) thick well watered and rammed inluding all cost as per specification in complete. labour charge for m.s. reinforcement for r.c.c. work including cutting, bending & typing the grills & placing in position including cost of binding wire 18 to 20 guage per qntl. including cost of hysd still bar (fe 415/ fe 500) filling the foundation and plinth with excavated material as directed by the engineer-incharge. white washing 3 coat with approve good stone lime including cost conveyance charges of materials including supply of labour, gum, indigo etc. required for the work complete as directed by the engineer-incharge. finishing wall with water proofing cement paint of approved shade two coats to new work to give an even shade including cost of cement paints. etc. complete as per the direction of engineer – in charge. writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the engineer-incharge. labour for fitting and fixing for door and window etc. complete as per the direction of the engineer-incharge. cost of grill for window cost of iron shutter for door priming 1 coat with any appproved primer painting two coats with approved paint on new work supplying of 160 mm dia unplasticised rigid upvc pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms/cc of straight length of 6 (six) meter for portable water supplies conforming to is - 4985 / 2000 of bis - amendment - 2 read with table - 1 of is - specification bearing isi marks for working pressure ci - i upvc pipe to withstand pressure of 2.5 kgf/sqcm & the specification and manufacturer name should be prominently marked on body of each pipe as per the latest amendment of is - 4985. it includes the cost of sockets in case of plain ended pipe. pdi test ( both pre & post inspection ) are to be condcuted and should be marked on body of each pipe and report is to be obtained from cipet, bhubaneswar necessary approval of authority including transportation to work site in complete shape. fitting of un plasticised 160mm dia pvc pipe for following inside dia mtr. for all classes of pipe including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of pvc tee for outlet and pvc shaddle and pvc riser nipple for fitting air valve, equal tee etc. complete including conveyance pipe from village to worksite and testing of pipe line etc. complete as per the direction of the engineer-incharge. 7.5 hp / 5.6 kw submersible pumpset corpled with totally enclosed water cooled squirrel case induction motor with delivery discharge 1100 lpm at 36 meter head with s/s cable, clamp clip etc. suitable for operation at 415v + -15%, 3 phase 50hz a.c. power supply as per particulars in annexure. labour charges for installation of 7.5hp motor including fitting & fixing of base frame, fitting & fixing suction and delivery pipe to motor, nr valve, foot valve, sluice valve and other fitting materials including cutting, welding and construction of supporting pillar etc. complete as per the direction of the engineer-incharge. 100 mm ø nominal bore g.i. pipe having wall thickness 4.5 mm electrical resistance welded of medium class confirming to is - 1239 (pt-1 of 2004) with socketed at one end and the other end protected with plastic thread protector. the socket confirming to is-1239 (pt-ii/1992) with latest amendmewnts in random length of 4 to 7 mtrs. each pipe should bear isi certification & manufacturers name / trade mark. 100 mm dia g.i. bend is no.1239(part-ii/1992) 100 mm dia g.i. flange is no.6392 / 1971 cost of tw safe guard for stand includng labour charge 100mm dia gi socket is 1239 (part-ii/1992 ) cost of 100 mm dia ms t/w clamp cost of 100 mm dia c.i reflux valve(nr) 25 mm ø air release valve with saddle & raiser pipe. the air release valve shall confirm to is 14845 with isi mark. 160 mm x 160 mm x 160 mm ø pvc equal tee (w.p. 4 kgf/cm2) confirming to is-4995/1988 with latest ammendment 160 mm ø pvc end cap (w.p. 10 kgf/cm2) confirming to is-4995/1988 with latest ammendment 5/8 x3" nut bolt & foundation nut bolt as per is specification 1/8" thick rubber insertion as per is specification cost, supplying of 160mmx160mmx110mm dia weldless g.i.tee (3.6mm thickness) with bend, closing and opening arrangement of reputed brand including all cost, conveyance, cess etc complete but excluding cost of gst cost of 160mm×110mm dia pvc reducing socket. cost of 12 mm wire rope control pannel with automatic star delta starter, sheet steel enclosure suitable for operation of squirrel cage induction motor up to 10 hp with 16 amp (ac -3) duty contractor at 415 volt+6%-15%, 3 phase, 50 hz ac supply with over load relay range 6.00 to 9.50 amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 v. the starter should provide dependable protection against over load and single phasing fitted with volt meter,ameter,mcb in complete shape including indicator lamp 63 amp main switch triple pole & neutral of voltage range 440 volt of re-wirable fuse and shall confirm to is 4064 part i & with isi mark. 3 x 10 sqmm tarpodar cable xlpe (cross link polyethylin) conforming to is: 7098 (part-ii) including laying below .9mtr. of the ground and filling the excavated materials including watering and ramming. 2.50mm2 submerssible (3 core) flat cable isi mark of reputed brand of isi specification including all cost, conveyance, cess etc complete but excluding cost of gst cost of wiring of pump chamber electrical installation with electrical materials such as pvc tape, ampere tape, 7/20 pvc copper wire, 3/20 pvc copper wire, g.i. flexible conduite pipe, no.6 g.i. wire, copper cable socket, g.i. socket and flange and petty materials required for electrical installation including fixing of td cable inside the earth trench as per direction of engineer-in-charge.. electrical earthing with digging earth pit of size (2 ft x 2 ft x 3 ft ) and using 1/2 '' g.i pipe ,no -6 g.i wire ,cable socket ,flange , carcoal, salt etc. as per the direction of the engineer-incharge. 4 kvr power shunt capasitor 4.0 mm 2 pvc single core copper wire labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level in alluvial soil strata by mud rotary rig drilling as required to suit the site condition as per the direction of engineer in charge including use of own rigs with its accessories, tools and plants and all consumables (like coir rope, cotton waste and bentonite powder etc. complete) etc. for lowering of finished bore suitable for lowering (minimum 400 mm dia.) of 200mm dia gi/pvc pipe for housing fitted with sockets and with or without well screen as per the necessity for the soft medium, hard and boulder formations (. gi/pvc casing pipes if required by the contractor to prevent collapse of over burden portion ) including lower and withdrawing of casing pipes after drilling 200mm to 450mm dia in over burden portion. for drilling of 200 (8”) dia pipe. from 0 mtr. to 100th meters supply of all labour & t&p for lowering the following sizes of pvc pipes with or without slotted pipes as per the necessity from ground level & fitted & fixed up in perfectly verticaly position inlcuding cutting & threading pipe and slotted pipe and fixing all jointing materials etc. complete. and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above excluding cost of fitting & joining materials. 200mm dia pvc/gi casing pipes cleaning and developing the production well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour as per the direction of engineer-in-charge. supplying all materials,labour t & p for packing the bore with washed gravel size (p-6) arround the well screen and pipes in good quality including cost of gravel ,conveyance,royality,etc complete as per direction engineer-in-charge. (100m depth) =0.786 x (0.4² - 0.2²) x 100mtr = 9.43 say 9.5 cum supplying all labour tools ,plant and grouting with cement bentonite slurry for saline sealing in the bore arround 200mm dia pvc casing pipe etc all complete as per direction of engg in charge(including cost of cement and bentonite) labour charges for cutting transverse slot on 200 mm dia pvc pipe with slot size 1.5 mm as per specification threading charges 8" pvc bail plug 8" pvc threaded end cap pn-10 200mm x 12" long pvc shot piece 200mm ø schedule 80 casing pipe (as per epm rate order no.2877 dated 05.07.2025) water sample test if required

Related Searched Keywords : plastic tub

List of plastic-tub Tenders

Tender for gem bids for purchase, coller 90 ltr, table cloth white, plastic tub large, plasticchair with arms, register 250 pages

Get plastic tub Tender Alert...

Related Searched Keywords : plastic tub

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us