Filters

List of latest dismantling Tenders in Indian Tenders. Click on any dismantling Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for dismantling Tenders.

All-Tenders (268)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :22198325 | 23 Oct, 2021

Tender Value : 0

Fatehabad - Haryana

Tender for auction contract for dismantling of school building

State Government

TRN :22198371 | 27 Oct, 2021

Tender Value : 14.02 Lacs

Patna - Bihar

Tender for proposed dismantling of road and earth cutting for the year 2021-22

State Government

TRN :22198597 | 26 Oct, 2021

Tender Value : 0

Fatehgadh - Uttar Pradesh

Tender for auction contract for dismantling of building and disposal of building

State Government

TRN :22198599 | 01 Nov, 2021

Tender Value : 24.16 Lacs

Kolhapur - Maharashtra

Tender for supply well providing, constructing coffer dam in river basin/dam storages as per type design including excavation, the middle portion with b.c. soil in gunny bags if required. providing impervious/semipervious materials on both side of b.c. soil in gunny bags if required including ramming, compacting to the satisfaction of engineer-in-charge, till the completion of work including dismantling coffer dam after completion of works and disposing off the material as directed by the engineer-in-charge.

Central Government And Public Sector

TRN :22199147 | 26 Oct, 2021

Tender Value : 21.1 Thousand

Chennai - Tamil Nadu

Tender for dismantling, shifting and installing of existing old 63kva ea set from te kalmandapam to te koyambedu and misc worksw:providing ms pipe line work for diesel inlet and outlet of engine

Central Government And Public Sector

TRN :22199162 | 26 Oct, 2021

Tender Value : 60.7 Thousand

Chennai - Tamil Nadu

Tender for supply, installation, testing, commissioning of 2nos. 380 kva engine alternator set with acoustic enclosure for te bldg. rk nagar, sw: dismantling & shifting of existing 500kva e/a set

corporations/Associations/Others

TRN :22199730 | 25 Oct, 2021

Tender Value : 8.27 Lacs

Kutch - Gujarat

Tender for erection of 05 nos of tower and dismantling of 05 h-frame with conductor and hardware replacement of 66kv vajepar- kharoi line. work approved under r and m plan 2021-22

Central Government/Public Sector

TRN :22200969 | 10 Nov, 2021

Tender Value : 0

Raipur - Chhattisgarh

Tender for design, supply, delivery to site, dismantling, erection, commissioningand pg test of seven nos of tws with trash racks, one set of electricalhoist semi goliath crane, one set of stop log gates of stage i cw system and six nos of tws with trash rack

Central Government/Public Sector

TRN :22201006 | 08 Nov, 2021

Tender Value : 8.89 Crore

Auraiya - Uttar Pradesh

Tender for supply of carbon steel pipes including connettor / coupling is 1239 part i galv, scrm, welded size: 1/2, heavy carbon steel, as per astm a 105, dimension confirming to ansi b 16.5 & scrd, 150, ff/125aarh size: 6, 150# blind flanges carbon steel, as per astm a 105galv, dimension confirming to ansi b 16.5, 150, ff/125aarh size: 6, 150# 90° elbow, astm a 105galv, b-16.11, scrf, 3000, is 1239part ii size: 1 equal tee, astm a 105galv, b-16.11, scrf, 3000, is 1239part ii size: 1 un-equal tee, astm a 105galv, b-16.11, scrf, 3000, is 1239part ii size: 2 x 1 cplng.half, astm a 105galv, b-16.11, scrf, 3000, is 1239part ii size: 3 / 4 cap, astm a 105galv, , b-16.11, scrf, 3000, is 1239part ii size: 3 / 4 vlv. gate, scrf, cl.2, 3000, body/bonnet – is 318 gr. 2, leaded tin bronze, trim – is 320 alloy ht. 2 dimn confirming to is 778 cl. 2 size: 1 str., 150#, flgd/ff/ 125 aarh, astm a234 gr. wpb, internal ss 304 / ‘t’ type, galv. size: 6 upright sprinkler, k-factor : us-8, & 79 deg.c, min operating pressure - 2 bar size: 3 / 4 12. carbon steel pipes including connettor / coupling is 1239 part i black, be, welded size: 6, heavy carbon steel, as per astm a 105, dimension confirming to ansi b 16.5 & scrd, 150, ff/125aarh size: 6, 150# blind flanges carbon steel, as per astm a 105galv, dimension confirming to ansi b 16.5, 150, ff/125aarh size: 6, 150# 90° elbow, astm a 105galv, b-16.11, scrf, 3000, is 1239part ii size: 1 equal tee, is-1239part-ii galv, is-1239-ii, scrf, size: 2 cplng.half, astm a 105galv, b-16.11, scrf, 3000, is 1239part ii size: 3 / 4 cap, astm a 105galv, , b-16.11, scrf, 3000, is 1239part ii size: 3 / 4 cap, is-1239part-ii galv, is-1239-ii, scrf size: 2 vlv. gate, scrf, cl.2, 3000, body/bonnet – is 318 gr. 2, leaded tin bronze, trim – is 320 alloy ht. 2 dimn confirming to is 778 cl. 2 size: 1 vlv. gate, scrf, cl.2, 3000, body/bonnet – is 318 gr. 2, leaded tin bronze, trim – is 320 alloy ht. 2 size: 3 / 4 vlv. gate, scrf, cl.2, 3000, body/bonnet – is 318 gr. 2, leaded tin bronze, trim – is 320 alloy ht. 2 size: 1 / 2 vlv. nrv, 150#, pn 1.6, flgd/ff 125 aarh, body/bonnet – is 210 gr. fg. 200, trim is 320 alloy ht2 & dimn. confirming to is 5312 size: 6 str., 150#, flgd/ff/ 125 aarh, astm a234 gr. wpb, internal ss 304 / ‘t’ type, galv. size: 6 upright sprinkler, k-factor : us-8, & 79 deg.c, min operating pressure - 2 bar size: 3 / 4 hook up with existing 16 pipe to new 6 pipe including reinforcement pad size: 16 x 6 ptd warehouse - 1 providing temporary free standing movable barricades of height 2.0 m and made of angle sections 40x40x6mm or 50x50x3mm hollow ms tube posts/horizontal members/ bracings covered with 1.63mm thick ms sheet the sheet shall be fixed with 30x5mm ms flat by suitable welding/riveting. the panels shall be made so that gap of 50cm above the ground is available making overall height as 2.5m. ms channel islc 75 @ 5.70 kg/m, 50cm long shall be provided at the bottom having oval shaped holes of size 50x25mm at both ends with 50cm long ms angle 40x40x6mm bracing. suitable arrangement shall be made to fix the barricading to avoid from overturning by providing 250mm long expansion fasteners at both ends. 1.63 mm thickness for isolation of area, provided with suitable glow signs, warning signs etc. and painted with approved quality and color including dismantling /relocation / removal after earthwork in excavation including surface clearing removal of vegetation etc. to a maximum depth of 3.0 m for foundation of walls, columns etc., in all kinds of soil except soft rock and hard rock. including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m, as per direction of engineer-in-charge. filling available excavated earth excluding rock in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. including watering and consolidating by mechanical means to the required density as per the specification achieving 95% proctor density as per is: 2720. excess material shall be disposed, spread & levelled as per eic direction. providing and filling of fine/ coarse sand of approved quality in compressor block foundations etc. the sand shall be properly rammed and watered as per is:2720 in thickness not exceeding 150 mm all complete as per specifications and directions of engineer-in-charge. providing and laying stone / gravel soling under foundation and trench with stones of size 5-20 cm in layers not exceeding 75 mm including filling of voids with material like bajri, stone grits etc and compacting as per specifications and directions of engineer-in-charge. providing and laying fps bricks of class designation 7.5 masonry work in foundation in cement mortar 1:4 1 cement: 4 coarse sand as per specifications in one or more brick thickness and in any shape including circular, curved including providing recesses, opening, scaffolding, staging, curing, finishing the joints flush below ground level. the rate to include plastering of 15 mm thickness in cm 1:4 on exposed surface, complete in all respects. only net brick masonry volume as per drawing are measurable for payment. providing and laying half brick masonry of fps bricks of class designation 7.5 in superstructure in cement mortar 1:4 1 cement: 4 coarse sand as per specifications including, scaffolding, staging, curing, finishing the joints flush below ground level. the rate to include plastering of 15 mm thickness in cm 1:4 on exposed surface, complete in all respects. only net brick masonry surface as per drawing are measurable for payment. providing & applying cement plaster 1:4 1 cement: 4 fine sand on internal walls at all floors, at all heights with necessary preparation of base surfaces, hacking the brick masonry or rcc surface, the plaster surface shall be rubbed with iron plate till the surfaces become smooth, including, scaffoldings with platform, tools and tackles providing and laying external sand faced cement plaster in two coats 12 mm + 8mm with external pebble dash in cement mortar 1:3 mix respectively with water proofing compound, with chicken mesh wherever required including all tools and tackles and scaffolding and curing etc. complete providing and applying two coats white washing lime paint of approved manufacture with mixing of fevicol or equivalent approved adhesive @ 200gm per 10kg lime, on existing painted/unpainted surfaces including cleaning of existing surface using wire brush, removing all dirt and dust, preparing surface for applying painting evenly, with all materials, labour, tools & tackles & scaffolding if required etc… all complete as directed by engineer-in-charge. providing and laying in position pcc 1:3:6 1 cement: 3 coarse sand: 86stone aggregate 40 mm nominal size in foundations, substructure, under floor including tamping, ramming, vibrating, shuttering and curing etc. as specified and directed all complete. providing and laying in position specified grade of reinforced cement concrete, including the cost of centering, shuttering, finishing and excluding the cost of reinforcement, all work for all heights & depths- 1:1:2 1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size. notes: the rates of the above items are inclusive of the cost of labor, material & curing etc. complete. the construction material like cement, sand, coarse and fine aggregate, steel, bricks, water etc. should confirm to the quality as per concerning is codes. the contractors to arrange slump, cube test for cement concrete work as per standard at their cost. for bigger areas like forecourt etc-rmc m- 25 can be used. specifications will be - ready mixed m-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of r.m.c. from transit mixer to site of laying, including the cost of centering, shuttering finishing and excluding the cost of reinforcement, including cost of admixtures in recommended proportions as per is : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the engineer - in - charge to be supplying placing and fixing in position cold twisted deformed reinforcement bars conforming to is 1786 for rcc works including transportation to site, straightening, bending cleaning and cutting. cost to include binding wires all as per specification and directions of engineer in charge. supply, fabricating and fixing of mild steel embedments, inserts, pipe sleeves, angle pieces, rungs of various diameters, teflon, lugs, plates of dimensions as required etc. including welding, bolting, cutting, drilling, scaffolding, setting etc. all complete. centering and shuttering including strutting, propping etc. and removal of same for in-situ reinforced concrete and plain concrete work, below plinth level for foundation, footings, tie beams/plinth beams, columns, copings cable trenches, canopy foundations, slabs floor slabs, etc. complete in and as directed by engineer- in- charge. supply & fixing of toughened safety glass 5 to 12 mm thick for door & windows with material and labour complete inlcuding removal of broken glass and disposal of the same as per engineer in charge hdpe pipe 8 in 2 cuts to provide of 1 higher size than fire water pipe dia to be used at wall and pipe intersection. removal and refixing of exiting paver block:removal & refixing of paver block including laborer, watering ramming, compaction using soil compactor as per specification and instruction of eic providing, laying, spreading and compacting graded stone aggregate size range 53 mm to 0.075 mm to wet mix macadam wmm specification including premixing the material with water at omc in for all leads & lifts, laying in uniform layers with mechanical paverfinisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions of engineer-in-charge. providing and laying dense graded bituminous macadam using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specificatons and directions of engineer-in-charge. i 50 to 100 mm average compacted thickness with bitumen of grade vg-30 @ 5% percentage by weight of total mix and lime filler @ 2% percentage by weight of aggregate prepared in batch type hot mix plant of 100-120 tph capacity. demolition of brick masonry taking all necessary safety for all heights above or below plinth level . including supply of all tools tackles, labour, cutters, necessary scaffolding, propping etc including removing the debris and disposal of unserviceable material to any lead and stacking of serviceable materials, handing over serviceable material if required as per technical specifications and direction of engineer-in-charge. demolishing existing rcc works taking all necessary precautions for all depths below and all height above plinth level including supply of all tools and tackles, labour, cutters, necessary scaffolding, propping etc. including disposal of unserviceable material to any lead, stacking of steel and other serviceable materials as per technical specifications and direction of engineer-in-charge. demolishing cement concrete 1:4:8 manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. dismantling doors, windows and clerestory windows steel or wood shutter including frame, architrave, holdfasts etc. complete and stacking within 50 metres lead. dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground. dismantling water bound macadam road/ paver blocks manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the municipal dump yard as per direction of engineer-in-charge. dismantling bituminous road manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the muncipal dumpyard as per direction of engineer-in-charge. supply of m.s. plate of 12mm thick is conforming to is 2062 including transportation, handling & storage. supply of m.s. plate of 10mm thick is conforming to is 2062 including transportation, handling & storage. supply of m.s. plate of 6mm thick is conforming to is 2062 including transportation, handling & storage. supply of m.s. angle isa 50x50x6 is conforming to is 2062 gr. e250br/s275gr including transportation, handling & storage. supply of m.s. rod 16 dia. is conforming to is 2062 including transportation, handling & storage. supply of m.s. rod 10 dia. is conforming to is 2062 including transportation, handling & storage. supply of m.s. flat 50x6 is conforming to is 2062 including transportation, handling & storage. supply of m.s. flat 40x5 is conforming to is 2062 including transportation, handling & storage. fabricating & erection / fixing in position structural steel upto15m height at all locations including supply of nuts, bolts, hilti bolts, washers, welding electrodes and all others consumables as required, including painting of steel structure & handling & transportation from owner’s store to site as per the drawings / directions of engineer-in-charge. supply, transportation, installation, testing & commissioning of pressure guages 150mm dia, range 0- 16 kg/cm2 with isolation cock including all required tube fittings and accessories etc. complete with in all respect. reference datasheet attached supply, transportation, installation, testing & commissioning of orifice plate multi stage, range 0-16 kg/cm2, including all required tube fittings and accessories etc. complete with in all respect. reference datasheet attached supply, transportation, installation, testing & commissioning of hydraulic operated alarm including all required tube fittings and accessories etc. complete with in all respect.

corporations/Associations/Others

TRN :22201730 | 28 Oct, 2021

Tender Value : 0

New Delhi - Delhi

Tender for design fabrication erection maintenance and dismantling of punjab pavillion on turn-key basis at pragati maidan

Related Searched Keywords : dismantling

List of latest dismantling Tenders in Indian Tenders. Click on any dismantling Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for dismantling Tenders.

Tender for auction contract for dismantling of school building

Tender for proposed dismantling of road and earth cutting for the year 2021-22

Tender for auction contract for dismantling of building and disposal of building

Tender for dismantling, shifting and installing of existing old 63kva ea set from te kalmandapam to te koyambedu and misc worksw:providing ms pipe line work for diesel inlet and outlet of engine

Tender for supply, installation, testing, commissioning of 2nos. 380 kva engine alternator set with acoustic enclosure for te bldg. rk nagar, sw: dismantling & shifting of existing 500kva e/a set

Tender for erection of 05 nos of tower and dismantling of 05 h-frame with conductor and hardware replacement of 66kv vajepar- kharoi line. work approved under r and m plan 2021-22

Tender for design, supply, delivery to site, dismantling, erection, commissioningand pg test of seven nos of tws with trash racks, one set of electricalhoist semi goliath crane, one set of stop log gates of stage i cw system and six nos of tws with trash rack

Tender for design fabrication erection maintenance and dismantling of punjab pavillion on turn-key basis at pragati maidan

Get dismantling Tender Alert...

Related Searched Keywords : dismantling

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us