Filters

List of connection-pin Tenders

List of latest connection-pin Tenders in Indian Tenders. Click on any connection-pin Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for connection-pin Tenders.

All-Tenders (25)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :35763340 | 10 Nov, 2025

Tender Value : 17.65 Lacs

Dausa - Rajasthan

Tender for major repair work under state budget head at govt. sss bilona kalan -demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster (ceiling): 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand) internal plaster : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :12mm thick. plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. panting on doors & windows :- painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of 240/415 v ac mcb with positive isolation of breaking capacity not less than 10 ka (b/ c tripping characteristic as per type of load and site requirement) 4kv impulse withstand voltage, as per pwd specification for electrical works with isi marked is 8828(1996) / conforming to iec 60898-1 2002, iec 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per iec, minimum phase termination capacity of 35sq.mm. , conductorline load reversibility, label holding facility , ip 20 contact protection and fitted with existing distribution board/sheets, min. operation 20,000 upto 32 a rating and 10,000 upto 63 a, 5000 for 80 a rating including making connections, testing etc. as required. . oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .6a to 32a rating. 50 a to 63a rating providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed un-arrmoured aluminium cable confirming to is:1554 p-i / is :7098 p - i of 1.1 kv with h4- grade electrolytic aluminium conductor confirming to is 8130 of purity >99.6 %, inner / outer sheath confirming to is:5831 in existing rcc / hume / stoneware / pvc pipe/ open duct/cable trench / cable tray (with cable tie) including testing etc. as required of following size. oem must have it's own in house nabl accrediated laboratory for testing procedure as per is:10810. for additional technical parameters of product / work refer annexure 'a' attached with this bsr 6.0 sq. mm 4 core providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating p & f isi marked (is:3854) 6 amp. flush type non modular switch with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material including cutting hole in tile and making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of of 3/5 pin 6 amp. flush type non modular socket made out from industrial grade polycarbonate or fire resistant abs material, brass terminal with porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .

Central Government/Public Sector

TRN :35763694 | 11 Nov, 2025

Tender Value : 0

Jhansi - Uttar Pradesh

Tender for gem bids for gasket blanking plate , gasket , ring retaining , ring rubber o , seat , pin , gasket jocky pully , rerainer gasket , gasket aerator , plug magnetic , pin master , gasket connection , plug , o ring , washer , clamp hose , nut , connection fuel drain ar , nut cross head , spring , cock drain , boot , seal cap filter , bolt , seal , gasket water pump , bolt shoe , screw cross head , bushing , connection fuel inlet , elbow on by pass filter , hose , gasket exhaust manifold , tube fuel supply , element filter , screen lub oil section , seal oil , starter switch , screen filter , o ring cover , manifold fuel supply , gasket housing to block , eliment corrison resister , blanking plate , thermostat , belt fan , gasket exhaust front , hose assy , cap assy , washer spring , manifold fuel drain

State Government

TRN :35763827 | 10 Nov, 2025

Tender Value : 2.94 Lacs

Dausa - Rajasthan

Tender for major repair work under state budget head at gups narayanpura - demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). random rubble stone masonry with hard stone in superstructure above plinth level and upto five level above 30cm. thick walls in :cement mortar 1:6 ( 1-cement : 6-sand).cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." stone kharanja : random rubble dry stone kharanja under floor. panting on doors & windows :- painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work p&f rigid pvc pipe (is:4985 mark) class ii(4 kg. /cm.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant 110mm dia wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr

State Government

TRN :35765746 | 10 Nov, 2025

Tender Value : 4.90 Lacs

Jaipur - Rajasthan

Tender for demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). supply & stacking good soil of earth at site complete including loading unloading & transportation etc.good soil of earth filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :columns, pillars, posts and struts etc. centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.m20 grade nominal mix / design mix roviding m-25 grade concrete by using cement as per codal provision instead of m-20 grade design mix. providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating

State Government

TRN :35766126 | 10 Nov, 2025

Tender Value : 4.90 Lacs

Dausa - Rajasthan

Tender for demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating

Central Government/Public Sector

TRN :35766141 | 25 Nov, 2025

Tender Value : 0

Ratlam - Madhya Pradesh

Tender for ratlam division-pingleshwar - electrical work in connection with (1) provision of 2 high level platforms with water supply arrangements (simhastha 2028).(2) provision of 2 nos. 6 meters wide fobs with cover with ramp at pingleswar station (simhastha 2028)

Central Government/Public Sector

TRN :35770160 | 12 Nov, 2025

Tender Value : 0

Imphal - Manipur

Tender for gem bids for led bulb 18w 220-240 volt led bulb 9w 220-240 volt ceiling fan 1200mm sweep with electronic regulatorconforming to is switch socket combination 6 amp 240vwith gang box isi marked switch socket combination 15amp 240v with gang box isi marked pedestal fan 400mmsweep wall mounted fan 300mm sweep conforming to is socket 3 oblique 6 pin 5 obliqu 15 amp 240v isi marked exhaust fan 300mm sweep conforming to is mcbdistribution box 8 way conforming to is 13032 mcb 20amp sp 240 volts angle holder bakelite isi marked concertina coil 1050mm dia hdpe sand bags of size14inch x 36inch weight not less than 60 gms led securitylifgt fitting 20 watts security light fittings for 65w led plywood commercial bwr grade isi marked of size 8ft x 4ftx 12mm thick bib cock fancy type 15mm long nozzle cpbrass mirror for gents of size 30inchx 15inch x5mm thick pvc connection pipe 15mm dia 450mm long with both sidenut and washer jet spray teflon tape 3 oblique 8 inchwide 10 mtr roll gun metal gate valve 25mm m painingbrush 100mm standard quality cp towel rail 600mm long20mm dia with bracket bricks sub class b old size bestlocally available minimum compressive strength 75 kgoblique sqcm water absorption not more than 20percentage app water proofing membrane 3 mm thick 1mwide 10 m long long angle iron picket of size 18 mtrlength of size 2inch x2inch laip pendent holder bakelite isimarked led batten surface 4ft long 18w output 1600lumen per watt with suitable powder coated frame endcape and connector swtich piano 6 amp 240v isi marked cp cast copper alloy bib cock long body 15mm bore cpshower rose 75mm dia with swivel arm 15mm bore squareoblique round shape mcb 10 amp sp with enclosure boxmild steel mcb 32 sp 240 volts mcb 40 amp sp 240 bid number gem2025b6848455 dated 01-11-2025 bid document1 63 0 0 volts, , mcb 63 dp 240 volts, , bulk head fitting in deepdrawn anodized aluminum body, epoxy powder coated andhead resistant prismatic glass cover with specially., waterdespencer 20 ltr make voltas, vitreous china pedestalpattern water closet european type ewc inclk pvc seat andcover, nylon rope 32mm, vitreous china wash hand basinof size 550mm x 400mm, pvc insulated sheathedunarmored cable 6sqmm twin core aluminum conductor isimarked with working voltage upto 1100 volt roll of 90 mtrs, flexible cable twin twisted roll of 90 mtr 23 oblique 0.0040, conforming to is, pvc sheathed unarmored strandedcopper conductor cable of size 1sqmm conforming to isimarked 90m roll, tripple layer hdpe water storage tankcylindrical vertical with closed top 1000ltrs capacityconforming to is specification, tripple layer hdpe waterstorage tank cylindrical vertical with closed top 500ltrscapacity conforming to is specification, 1 hp motor, nonskid ceramic colored tiles of size 600mm x 600mm x 9 to10mm thick, sheated unarmored stranded copperconductor cable of size 1.5sqmm conforming to isiconductor cable to size 1.5sqmm conforming to isi marked90m roll, flood light 200 watt, ppgi profiled sheet of size10ft x 3.5ft, 0.50mm thick, mild steel corrugatedgalvanized cgi sheet 8ft x 3ft, .63mm thick isi marked, ordinary portland cement 43 grade in hdpe bags of 50 kgseach, confirming to is 269-1976, m seal 100gm, pvcsheathed unarmoured stranded copper conductor cable ofsize 2.5sqmm conforming to isi marked 90m roll, pvcsheathed unarmoured stranded copper conductor cable ofsize 4sqmm conforming to isi marked 90m roll, thinner forpaint, tarpentin oil, paining brush 75mm standard quality, painting brush 50mm standard quality, coarse sanddimapur sand conforming to is 383 to1978., coarseaggregate crushed stone 20mm graded conforming to is383 to1979, plywood commercial bwr grade isi marked ofsize 8ft 4ft x 19mm thich, cp cast copper alloy stoop cock15 mm bore, mild steel hard drawn wire mesh 50 x 50mmpitch 3mm dia of wire, weight not less that 2.20 kg per, white cement, tirpolean plastic 30 x 30, tirpolean plastic24x18, pvc swr pipe 75m dia 3m long with socket end isimarked, pvc swr pipe 110m dia 3m long with socket endisi marked, pvc l bow 4 inch, pvc t 4 inch, pvc socket 4inch, pvc l bow 3 inch, pvc t 3 inch, pcv socket 3 inch, pixel bulk head fitting in deep drawn anodized minimumbody, epoxy powder coated and heat resistant prismaticglass cover with specially, change over switch 63 amp fourpole, change over switch 100 amp four pole, 25 ltr waterstrong geyser plastic body with all accessories forinstallation, pvc insulated sheathed unarmoured cable10sqmm twin core aluminium conductor isi marked withworking voltage upto 1100 volt roll of 90 mtr, insulationtape 3 oblique 8 inch wide 9 mtr roll, mild steel wire nailssorted size, gi binding wire 3mm dia, curtain rod mscp20mm dia 12ft long, bracket for curtain rod aluminiumpowder coated curtain rod in white colour 20 oblique 25mmdia, synthetic enamel paint high gloss superiour qualityblack colour, synthetic enamel paint high gloss superiourquality red colour, synthetic enamel paint high glosssuperiour quality yellow colour, synthetic enamel painthigh gloss superiour quality og colour, synthetic enamelpaint high gloss superiour quality white colour, plywoodcommercial bwr grade isi marked of size 6ft x 3ft x 12mmthick, cp cast copper alloy pillar cock 15mm, batten holderbakelite, vitreous china urinal pot bowl type including //bid details2 / 63 spreader, solvent cement for pvc pipe, distemper paintemulsion oblique acrylic distemper, pvc flexible ribbed pipe20mm dia

Central Government/Public Sector

TRN :35756804 | 10 Nov, 2025

Tender Value : 0

Dimapur - Nagaland

Tender for gem bids for universal batten with g-13 lamp holder for t-8 lamps 20watt single side connection as per zonal specification led2 feet x2 feet 42 watt electronic drive recess mountedfitting warmwhite oblique coolday white make philipsoblique wipro oblique cg oblique bajaj oblique surya andeqivalent ultra modern recess mounting luminaire highbrightness leds 42 watt led 6000k led green lamp 05watt make philips oblique wipro oblique cg oblique bajajoblique surya and equivalent led white lamp 05 wattmake philips oblique wipro oblique cg oblique bajaj obliquesurya and equivalent ledyellow lamp 05 watt makephilips oblique wipro oblique cg oblique bajaj oblique suryaand equivalent led red lamp 05 watt make philipsoblique wipro oblique cg oblique bajaj oblique surya andequivalent runway lamp 200watt as per zonalspecification aviation lights alumimium led neon as perzonal specification globe led as per zonal specification city 3 decorative wall light fitting make philips oblique wiprooblique cg oblique bajaj oblique surya and equivalent mcbdb 2 way make siemens oblique l and t oblique hageroblique abb and equivalent isolator 100 amps 4 pole tpnmake siemens oblique l and t oblique hager oblique abband equivalent change over swtich 63 amp 415 volt makehavells oblique legrand oblique abb and equivalent cableflexible copper conductor 23 oblique 0076 make finolexoblique rr kable oblique kei oblique polycabe and eqivalentas per buyer reqmt cable flexible copper conductor 14oblique 0076 make finolex oblique rr kable oblique keioblique polycabe and eqivalent as per buyer reqmt pvcround cable 3 core 23 oblique 0076 make finolex obliquerr kable oblique kei oblique polycabe and eqivalent pvcround cable 3 core 40 oblique 0076 make finolex obliquerr kable oblique kei oblique polycabe and eqivalent bid number gem2025b6797642 dated 31-10-2025 bid document1 120 1 1 250mm exhaust fan plastic body make bajaj oblique cgoblique sudhir and eqivalent, 200mm exhaust fan plasticbody make bajaj oblique cg oblique sudhir and eqivalent, 150mm exhaust fan plastic body make bajaj oblique cgoblique sudhir and eqivalent, ht barrel fuse 20 amp pkt of10 nos make denson oblique rashtriya oblique m-3 andequivalent, ht barrel fuse 10 amp 10nos pkt as per zonalspecification, barrel fuse suitable for ht 11 kv ratedcapacity 60 amps as per zonal specification, ht barrel fuse5 amp 10 nos pkt as per zonal specification, ht barrel fuse15 amp 10 nos pkt as per zonal specification, capacitor forcelling fan 2.5 mfd make universal oblique anchor andeqivalent, lugs copper alloy 150 sqmm make denseenoblique raychem oblique m-3 and equivalent, lugs copperalloy 185 sqmm as per zonal specification, lugs copperalloy 95 sqmm as per zonal specification, lugs copperalloy 120 sqmm as per zonal specification, lugs copperalloy 70 sqmm as per zonal specification, lugs copperalloy 50 sqmm as per zonal specification, lugs copperalloy 35 sqmm as per zonal specification, lugs copperalloy 25 sqmm as per zonal specification, lugs copperalloy 240 sqmm as per zonal specification, lugs copperalloy 400 sqmm as per zonal specification, plug top 3 pin 5oblique 6 amp make anchor oblique schnieder obliquehager and equivalent, pinao socket 16 amp, 5 pin makeanchor oblique schnieder oblique hager and equivalent, 5amps socket make anchor oblique schnieder oblique hagerand equivalent, pvc batton holder make anchor obliqueschnieder oblique hager and equivalent, pvc angle holdermake anchor oblique schnieder oblique hager andequivalent, pvc pendent holder make anchor obliqueschnieder oblique hager and equivalent, modular fanregulator 1200 oblique 1400 mm make as per sample, thread bulb big led as per zonal specification, threadbulb small led make philips oblique wipro oblique cgoblique bajaj oblique surya and equivalent, pvc ceiling rose2 oblique 3 terminal make anchor oblique schnieder obliquehager and equivalent, insulation tape roll 38 mm x 25 mlong as per zonal specification, insulation tape roll 20 mmx 25 m long as per zonal specification, insulation tape roll15 mm x 25 m long as per zonal specification, insulationtape roll 25 mm x 25 m long as per zonal specification, ampere tape 15mm width as per zonal specification, pvcswitch board 8 feet feet x6 feet feet make presto plastoblique finolex oblique kalinga and equivalent, pvc switchbd 4 inch x4 inch make presto plast oblique finolex obliquekalinga and equivalent, pvc switch bd 7 inch x 4 inch makepresto plast oblique finolex oblique kalinga and equivalent, pvc switch bd 12 inch x10 inch make presto plast obliquefinolex oblique kalinga and equivalent, pvc switch bdrectangular 8 inch x10 inch make presto plast obliquefinolex oblique kalinga and equivalent, pvc casing capping15mm make presto plast oblique finolex oblique kalingaand equivalent, pvc cassing capping 20 mm make prestoplast oblique finolex oblique kalinga and equivalent, pvccasing capping 25 mm x 12mm make presto plast obliquefinolex oblique kalinga and equivalent, pvc casing capping32 mm make presto plast oblique finolex oblique kalingaand equivalent, pvc conduit pipe 25 mm make presto plastoblique finolex oblique kalinga and equivalent, pvcconduit pipe 20 mm make presto plast oblique finolexoblique kalinga and equivalent, pvc flexible pipe 20 mmcorrugated make presto plast oblique finolex obliquekalinga and equivalent, pvc flexible pipe 25 mm //bid details2 / 120 corrugated make presto plast oblique finolex obliquekalinga and equivalent, pvc flexible pipe 32 mmcorrugated make presto plast oblique finolex obliquekalinga and equivalent, tarpentine oil make asian andequivalent, paint og of 04 ltr container make asian obliqueberger oblique dulux and equivalent, paint black of 04 ltrcontainer make berger oblique asian oblique shalimar andequivalent, synthetic enamel paint white of 04 ltrcontainer 1st grade make dulux oblique berger obliqueasian, timber scantling 1st class 50x50mm teak wood, timber scantling 1st class 100x50mm teak wood, plywoodcommercial bwr grade 7 feet x3 feet x12mm thick makearchid oblique globe oblique green ply and equivalent, prelaminated mdf board 8 feet x4 feet x 18 oblique 20 mmmake bhutan oblique novapam oblique green ply andequivalent, block board bwr 8 feet x4 feet x19 mm thickmake archid oblique globe oblique green ply and equivalent, ply wood bwr 8 feet x 4 feet x 12 mm thick make archidoblique globe oblique green ply and equivalent, ply woodbwr 8 feet x 4 feet x 6mm thick archid oblique globeoblique green ply and equivalent, ply wood one side teakface size 8 feet x 4 feet x 4mm thick archid oblique greenply and equivalent, ply wood bwr 8 feet x 4 feet x 4mmthick archid oblique globe oblique green ply and equivalent, pre-laminated mdf board 8 feet x4 feet x12mm bhutanoblique novapam oblique green ply and equivalent, headboard pf bed ply top as per zonal specification, foot boardof bed ply top as per zonal specification, timber scantling1st class 75mm x 40mm teak wood, timber scantling 1st coblique h oblique w 30mm x 25mm teak wood, timberscantling 1st class 25x50 mm teak wood, laminated sheet8 feet x 4 feet x 1 mm thick make green ply oblique kitoblique archid and equivalent, beading teak wood size4mm x40mm as per zonal specification, teak woodenbeading 12x25mm, teak wood beading 20x25mm, teakwooden beading half round 20mm as per zonalspecification, teak wooden beedings1 inch x1 inch x6 feetlong as per zonal specification, looking mirror size 365mm x 1220mm x 5mm thick make modi guard andequivalent, looking mirror size 380 mm x 760mm x 5mmthick modi guard and equivalent, mirror of size1200x600x5mm thick modi gurad oblique gold fish andequivalent, glass panes size 3 feet x2 feet x5mm modiguard and equivalent, pvc beading 4mm x 20mm as perzonal specification, pvc beading 4mm x 15mm as perzonal specification, pvc seat for chair varamdah as perzonal specification, pvc seat for chair dining jco feet soblique ors as per zonal specification, nails wire 75mm asper zonal specification, nails wire 100mm as per zonalspecification, nails wire 40mm as per zonal specification, nails wire 60mm as per zonal specification, nails wire50mm as per zonal specification, nails wire 25mm as perzonal specification, nailes wire 150 mm as per zonalspecification, ms screw 35 mm as per zonal specification, ms screw 50 mm as per zonal specification, ms screw20mm as per zonal specification, ms screw 25 mm as perzonal specification, ms piano hinges 50mm x 5 feet longeach pkt 100 nos as per zonal specification, steel screw35mm each pkt 100 nos as per zonal specification, steelscrew 3 oblique 4 inch flat head as per zonal specification, machine screw full thread 35mm each pkt 100 as per zonalspecification, machine screw full thread 20mm each pkt100 as per zonal specification, machine screw 75mm withnut 100 nos of pkt as per zonal specification, hinges ms 50 //bid details3 / 120 mm to 100 mm as per zonal specification, hexa bladedouble edge as per zonal specification, gi check nut32mm as per zonal specification, gi lock 6 levers foralmirah four 04 holes godrej pattern and equivalent, gilock 6 levers for almirah two 02 holes godrej pattern andequivalent, lock for cup board godrej oblique norexoblique priya and equivalent, gi elbow 3 way 32 mm as perzonal specification, thinner 4 ltr in each container asianand equivalent, varnish 4 ltr container asian andequivalent, touch wood 1 ltr container asian andequivalent, dendrite 1 kg in container pidilite andequivalent, fevicol make - pidilite and equivalent, copalvarnish make - peacock and equivalent, pila mati as perzonal specification, basanti colour powder pkt 10 gms asper zonal specification, black colour powder as per zonalspecification, brown clolur powder as per zonalspecification, sand paper no 60 10 mtr as per zonalspecification, panel pin 25mm as per zonal specification, panel pin 20mm as per zonal specification, hasp andstaple steel 100mm as per zonal specification, slidingwheel for glass shutter as per zonal specification, aluminium peg as per zonal specification, cp knob 40 mmas per zonal specification, tapestry cloth best quality asper zonal specification, cloth malmal white 1.2 mtr wideas per zonal specification, cloth green blaizer1.5 mtr asper zonal specification, latherised rexin cloth best qualityas per zonal specification, nylon tape newar 50 oblique 55mm width. best quality as per zonal specification, bowhandle 100 mm as per zonal specification, broom sticks forsweeping as per zonal specification, hard rubber shoe forchair verandah as per zonal specification, hard rubbershoe for steel table as per zonal specification, aluminiumsheet 22 gauge as per zonal specificationuniversal batten with g-13 lamp holder for t-8 lamps 20watt, led 2x2 42 watt electronic drive recess mounted, ultra modern recess mounting luminaire leds 42 watt led6000k., led green lamp 0.5 watt make :philips/wipro/cg/bajaj /surya, led white lamp 0.5 wattmake : philips/wipro/cg/bajaj /surya, ledyellow lamp 0.5watt make : philips/wipro/cg/bajaj /surya, led red lamp0.5 watt make : philips/wipro/cg/bajaj /surya, runwaylamp 200watt as per zonal specification, aviation lightsalumimium led neon as per zonal specification, globeled as per zonal specification, city 3 decorative wall lightfitting make : philips/wipro/cg, mcb db 2 way make :siemens/l&t/hager/abb & equivalent, isolator 100 amps 4pole tpn make : siemens/l&t/hager/abb, change overswtich 63 amp 415 volt make : havells/legrand, cableflexible copper conductor 23/.0076 as per buyer reqmt, cable flexible copper conductor 14/.0076 as per buyerreqmt, pvc round cable, 3 core 23/.0076 make : finolex/rrkable/kei, pvc round cable, 3 core 40/.0076 make :finolex/rr kable/kei, 250mm exhaust fan plastic bodymake:bajaj/cg/sudhir & eqivalent, 200mm exhaust fanplastic body make : bajaj/cg/sudhir & eqivalent, 150mmexhaust fan plastic body make : bajaj/cg/sudhir &eqivalent, ht barrel fuse 20 amppkt of 10 nos make :denson/rashtriya/m-3, ht barrel fuse 10 amp10nos pktas per zonal specification, barrel fuse suitable for ht 11kv rated capacity 60 amps, ht barrel fuse 5 amp10 nospkt as per zonal specification, ht barrel fuse 15 amp10nos pkt as per zonal specification, capacitor for cellingfan 2.5 mfd make : universal/anchor, lugs copper alloy150 sqmm make : denseen/raychem/m-3 , lugs copperalloy 185 sqmm as per zonal specification, lugs copperalloy 95 sqmm as per zonal specification, lugs copper //bid details4 / 120

Central Government/Public Sector

TRN :35743120 | 10 Nov, 2025

Tender Value : 15.00 Lacs

Firozpur - Punjab

Tender for gem bids for demand, bid number gem2025b6828507 dated 30-10-2025 bid document1 53 1 1 xlpe cables for working voltages from 3.3 kv up to andincluding 33 kv as per is 7098 part 2 q3, mcb -miniature circuit - breakers for a.c. operation as per is / iec60898 part 1 q2, compression cable lugs q3, heatshrinkable straight joint kit ht 95 sqmm 11000v grade 3core isi marked, heat shrinkable straight lt joint kit 240sqmm 11000v grade 3 point 5 core isi marked, heatshrinkable lt end joint kit 240 sqmm 11000v grade 3 point5 core isi marked, heat shrinkable ht end joint kit indoor95 sqmm 11000v grade 3 core isi marked, tape insulation25mtr x 20mm width isi marked, plug and socket in sheetmetal box 01 mcb 20 amps isi marked, capacitor obliquecondenser 2.5 mfd, inner brass assembly for geyser 06holes isi marked, transformer oil di electric strength notless than 60 kv best quality, gi pipe medium grade 100mm bore isi marked, gi pipe medium grade 80 mm bore isimarked, gi pipe medium grade 50 mm bore isi marked, submersible pump starter 55 amps isi marked, pvcjunction box for street light, refrigeration gaschlorodifluora methane type cfm 22 r22 of size 1 kgcylinder, sluice valve 80 mm, upvc butterfly valve 160mm, thermostate 230v for geyser 7 inch long isi marked, heating element triangle 2 kw, fuse barrel 11 kv, powercontactor 100 amps isi marked, sluice valve 150 mm, pvcconduit pipe 1 inch dia 3 mtr length round shape isi marked, sluice valve 100 mm, gm gate valve 50 mm, pvc casingcaping 1 inch x 3 mtr long, gm gate valve 20 mm, gmgate valve 25 mm, fuse wire copper tinned 25 swg, submersible tullu water pump 18 w for desert cooler isimarked, spn db 4 way double door isi marked, nrv 80mm, plate 8m modular isi marked, nrv 100 mm, disctype insulator 11 kv, ceiling rose pvc 3 terminal isimarked, single phasing preventer isi marked, upvc butterfly valve 110 mm, primer paint red oxide 1 ltr pack, spndb 12 way double door isi marked, lower shutter forexhaust fan, spn db 8 way double door, adjustablenozzel 2 inch dia for swimming pool, dol starter 25 ampsisi marked, geyser safety valve 0 point 8 mpa isi standard, pvc connection pipe hot and cold 18 inch isi marked, geyser inner tank steel 25 ltrs, upvc foot valve 160 mm, solar heating element 3 kw isi marked, astronomical timerswitch isi marked, grass pad for desert cooler standard size, indicator bulb ac 220v neon type with wire for geyserred and green isi marked, gi elbow 25 mm, brass deadnut 3 oblique 4 inch for geyser isi standard, gi tee 25 mm, pin type insulator 11 kv, fastener 4 inch with screw forinstallation of geyser isi standard, upvc union 110 mm, pvc drain pipe 15 mm bore for ac 3 mtr long, pvc drainpipe 25 mm bore for water cooler 1 point 5 feet long, timer relay switch isi marked, gi nipple 25 mm 6 inchlong, gi nipple 25 mm 4 inch long, gi socket 25 mm, ginipple 20 mm 6 inch long, gi socket 20 mm, gi nipple 20mm 4 inch long, wash basin std size 550x450mm long isimarked, pvc water tank triple layer cylindrical type of1000ltrs capacity isi marked, pvc water tank triple layercylindrical type of 500ltrs capacity isi marked, pvc coverfor water storage tank 500 ltr isi marked

Central Government/Public Sector

TRN :35753319 | 19 Nov, 2025

Tender Value : 13.78 Lacs

Mundra - Gujarat

Tender for gem bids for supply and installation of double arm pole , supply and installation of single arm pole , supply and installation of led street lights , supply and installation of garden bollard type pole and 15w led lantern , supply and installation of 100w colour flood light , supply and installation of 50w flood light , supply and installation of 1.5 sq.mm x 3c armoured cable , supply and installation of electrical pole junction box , supply and installation of 30a, 6 way close type connector , supply and installation of 6a, 240v single pole mcb , supply and fabrication of copper clamp by using 25x3mm copper strip , supply and installation of 1. 5sq.mmx3c pvc insulated and sheathed coper flexible cable , supply and installation of 25 mm pvc pipe , supply and installation of 10a, 2p, mcb in power house , supply and installation of 6 way mcb distribution board , supply and installation of 25mm steel wire reinforced pvc flexible pipe , supply and laying of 50mm upvc pipe for road crossing , supply and installation of miscellaneous items , labour charges for excavation of cable trench , excavation for pole foundation , construction of footing structure , applying cement primer , applying signal red paint , applying metal primer , applying aluminium paint , demolishing of existing 29 footing structure , labour charges for laying of pipes in road crossings and ug cable markings with red colour bricks , supply and installation of 2m modular switch board box with matching frame plate and cover plate , supply and installation of 3m modular switch board box with matching frame plate and cover plate , supply and installation of 4m modular switch board box with matching frame plate and cover plate , supply and installation of 6m modular switch board box with matching frame plate and cover plate , supply and installation of 8m modular switch board box with matching frame plate and cover plate , supplying and fixing 6a modular switch and socket on the existing modular plate and switch box including connections , supplying and fixing 3 pin 6a modular socket outlet, on the existing modular plate and switch box including connections , supplying and fixing 16a modular switch on the existing modular plate and switch box including connections , supplying and fixing 6 pin 16 modular socket on the existing modular plate and switch box including connections , supply and installation of 16a universal extension board , supply and installation of 1m modular electronics fan regulator , supply and installation of 4 way spn db with earth connection. , supply and fixing 6a mcb , supply of 300mm pvc dom exhaust fan for installation in power house in the existing opening , installation of 300mm exhaust fan , extra carpentry work including supply and fixation of 19mm plywood on the exiting and ss net fixation at the outer side of opening , supply and installation of 12w, round surface led light , supply and fixing modular angle holder , supply and installation of self ballasted 20w led lamp , supply of 1200mm ceiling fan , installation testing and commissioning of ceiling fan , supply and installation of rotational adjustable pvc street light wall mount stand , supply and installation of led street light 25w,230v,50hz ac inbuilt with surge protection circuit , supply and installation of single phase 230v ac, 2hp monoblock pump , supply and installation of single phase 230v ac, 2hp motor starter , supply and installation of 6.5kg or higher front load, fully automatic washing machine , supply and installation of washing machine trolly stand , supply and installation of good quality of gate light on main gate pillar , supply of domestic clothing iron , supply of good quality nylon flexible pipe for gardening purpose , long solar panel cleaning brush kit heavy duty , gi mounting arm with clamps for installation led street light , supply of pvc suction hose and other items as per atc clause 7.1

Related Searched Keywords : connection pin

List of connection-pin Tenders

Tender for ratlam division-pingleshwar - electrical work in connection with (1) provision of 2 high level platforms with water supply arrangements (simhastha 2028).(2) provision of 2 nos. 6 meters wide fobs with cover with ramp at pingleswar station (simhastha 2028)

Get connection pin Tender Alert...

Related Searched Keywords : connection pin

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us