Filters

List of carrier Tenders

List of latest carrier Tenders in Indian Tenders. Click on any carrier Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for carrier Tenders.

All-Tenders (90)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :35193039 | 30 Aug, 2025

Tender Value : 0

Jammu - Jammu And Kashmir

Tender for gem bids for boq, positioner assy, hand brake cable, gear lever kitnm, brush carrier assy, major repair kit aircompressor, tapper roller bearing front hub, flexible hose assy, brake shoe lining set, oil seal

Central Government/Public Sector

TRN :35194118 | 30 Aug, 2025

Tender Value : 0

Jaipur - Rajasthan

Tender for gem bids for filter, filter element, front brake lever, brake shoe front, brake shoe rear, rep kit, dia clutch disc assy, field coilassy, brush carrier plate, brush set, radiator assy, kitmaster cylinder, clutch pressure plate, cable assy contspeedometer, throttle cable assy acccerlerator, discclutch

Central Government/Public Sector

TRN :35194477 | 01 Sep, 2025

Tender Value : 0

Nagpur - Maharashtra

Tender for gem bids for steel tubes, tubulars and other wrought steel fittings v2as per is 1239 part 1 q2 . . % % 4 4 /mse exemption for years ofexperience and turnoverno& % & % . . % % 4 4 /startup exemption for years ofexperience and turnoverno 5 5 & & /document requiredfrom sellercertificate requested in atc, oem authorizationcertificate, additional doc 1 requested in atc, additionaldoc 2 requested in atc, additional doc 3 requested inatc, additional doc 4 requested in atcin case any bidder is seeking exemption from experience /turnover criteria, the supporting documents to prove hiseligibility for exemption must be uploaded for evaluation bythe buyer7 7 9 9 : : ; ; & 9 & 9 < < 9 9 ; ; > >? ? % % /do you want to showdocuments uploaded by bidders to allbidders participated in bid?yes documents submitted as part of a clarification orrepresentation during the tender/bid process will also bedisplayed to other participated bidders after log in -- b b c c 5 5 d d / minimum number ofbids required to disable automatic bidextension3 d /bid number: gem/2025/b/6590919; /dated: 21-08-2025 & & / bid document1 / 27 ; 9; 9 d d, , m m -- / / number of days for which bidwould be auto--extended7 o %o % ;5 ;5 ; ; /bid to ra enabledyeso %o % p p /ra quali cation ruleh1-highest priced bid elimination5 5 r r /itc available tobuyeryes 4 4 /type of bidtwo packet bid4 4 t t /primary product categorysteel tubes, tubulars and other wrought steel fittings v2as per is 1239 part 1 u u & w & w /time allowed for technicalclarifications during technical evaluation3 days x x b b y y x x 4 4 / % % < 9 < 9 : : /inspection required byempanelled inspection authority / agenciespre-registered with gemno u u y y /evaluation methodgroup wise evaluation & & /arbitration clauseno /mediation clauseno //bid details /emd detail > /advisory bankidbi bankschedule-1 /emd amount in inr25000schedule-2 /emd amount in inr25000schedule-3 /emd amount in inr25000 /epbg detail > /advisory bankidbi bank 4 %/epbg percentage%5.00 b /duration of epbgrequired months.14a. . ^ % & 4& % & % 4 > o 9 /emd exemption: the bidder seeking emd exemption, must submit the valid supporting document2 / 27 for the relevant category as per gem gtc with the bid. under mse category, only manufacturers for goods andservice providers for services are eligible for exemption from emd. traders are excluded from the purview of thispolicy.b. the emd amount will be applicable for each schedule/group selected during bid creation.c. , , ` x < ; / emd & performance securityshould bein favour of beneficiary, wherever it is applicable. ` ` /beneficiary : head of department, financefinance department, moil limited, moil bhavan, 1a, katol road, nagpur-440013 the details of beneficiarybank for sending details of bg under sfms platform is advisory bank: idbi bank, idbi bank, gupta house, ravindranath tagore road, civil lines nagpur-440001, advisory bank ifsc code: ibkl0000389 & currentaccount no. 041102000018027.moil limited /splitting ; / bid splitting not applied. /mii purchase preference /mii purchase preferenceyes /mse purchase preference /mse purchase preferenceyes1. preference to make in india products for bids < 200 crore:preference shall be given to class 1 local supplieras defined in public procurement preference to make in india, order 2017 as amended from time to time and itssubsequent orders/notifications issued by concerned nodal ministry for specific goods/products. the minimumlocal content to qualify as a class 1 local supplier is denoted in the bid document. if the bidder wants to avail thepurchase preference, the bidder must upload a certificate from the oem regarding the percentage of the localcontent and the details of locations at which the local value addition is made along with their bid, failing whichno purchase preference shall be granted. in case the bid value is more than rs 10 crore, the declaration relatingto percentage of local content shall be certified by the statutory auditor or cost auditor, if the oem is a companyand by a practicing cost accountant or a chartered accountant for oems other than companies as per the publicprocurement preference to make-in -india order 2017 dated 04.06.2020. only class-i and class-ii local suppliersas per mii order dated 4.6.2020 will be eligible to bid. non - local suppliers as per mii order dated 04.06.2020 arenot eligible to participate. however, eligible micro and small enterprises will be allowed to participate .thebuyers are advised to refer the om no.f.1/4/2021-ppd dated 18.05.2023.om no.1 4 2021 ppd dated 18.05.2023 for compliance of concurrent application of public procurement policyfor micro and small enterprises order, 2012 and public procurement preference to make in india order, 2017. 2. purchase preference will be given to mses having valid udyam registration and whose credentials arevalidated online through udyam registration portal as defined in public procurement policy for micro and smallenterprises mses order, 2012 dated 23.03.2012 issued by ministry of micro, small and medium enterprises andits subsequent orders/notifications issued by concerned ministry. if the bidder wants to avail themselves of thepurchase preference, the bidder must be the manufacturer / oem of the offered product on gem. traders areexcluded from the purview of public procurement policy for micro and small enterprises and hence resellersoffering products manufactured by some other oem are not eligible for any purchase preference. in respect of bid3 / 27 for services, the bidder must be the service provider of the offered service. relevant documentary evidence inthis regard shall be uploaded along with the bid in respect of the offered product or service and buyer will decideeligibility for purchase preference based on documentary evidence submitted, while evaluating the bid. if l-1 isnot an mse and mse seller s has / have quoted price within l-1+ 15% selected by buyer of margin ofpurchase preference /price band defined in relevant policy, such mse seller shall be given opportunity to matchl-1 price and contract will be awarded for 25% selected by buyer percentage of total quantity. the buyers areadvised to refer the om no. f.1/4/2021-ppd dated 18.05.2023 om no.1 4 2021 ppd dated 18.05.2023 forcompliance of concurrent application of public procurement policy for micro and small enterprises order, 2012and public procurement preference to make in india order, 2017. benefits of mse will be allowed only if seller isvalidated on-line in gem profile as well as validated and approved by buyer after evaluation of documentssubmitted. 3. estimated bid value indicated above is being declared solely for the purpose of guidance on emd amount andfor determining the eligibility criteria related to turn over, past performance and project / past experience etc.this has no relevance or bearing on the price to be quoted by the bidders and is also not going to have anyimpact on bid participation. also this is not going to be used as a criteria in determining reasonableness ofquoted prices which would be determined by the buyer based on its own assessment of reasonableness andbased on competitive prices received in bid / ra process. 4. reverse auction would be conducted amongst all the technically qualified bidders except the highest quotingbidder. the technically qualified highest quoting bidder will not be allowed to participate in ra. however, h-1will also be allowed to participate in ra in following cases:i. if number of technically qualified bidders are only 2 or 3.ii. if buyer has chosen to split the bid amongst n sellers, and h1 bid is coming within n.iii. in case primary product of only one oem is left in contention for participation in ra on elimination of h-1.iv. if l-1 is non-mse and h-1 is eligible mse and h-1 price is coming within price band of 15% of non-mse l-1v. if l-1 is non-mii and h-1 is eligible mii and h-1 price is coming within price band of 20% of non-mii l-1if the buyer has mentioned mse purchase preference in atc then service provider is required to uploadnecessary documents for mse purchase preference for verification by the buyer during evaluation.evaluation method group wise evaluation method contract will be awarded schedulewise and the determination of l1 will be done separately for each schedule.the details of item-consignee combination covered under each schedule are as under:evaluationschedulesitem/categoryconsignee/reportingofficerconsignee addressquantityschedule-1steel tubes, tubulars and otherwrought steel fittings v2 as per is1239 part 1nitin surendraghodeswarpo:kandri, tah:ramtek, dist:nagpur, maharashtra, 44140144140154schedule-2steel tubes, tubulars and otherwrought steel fittings v2 as per is1239 part 1nitin surendraghodeswarpo:kandri, tah:ramtek, dist:nagpur, maharashtra, 44140144140156schedule-3steel tubes, tubulars and otherwrought steel fittings v2 as per is1239 part 1nitin surendraghodeswarpo:kandri, tah:ramtek, dist:nagpur, maharashtra, 44140144140113steel tubes, tubulars and otherwrought steel fittings v2 as per is1239 part 1nitin surendraghodeswarpo:kandri, tah:ramtek, dist:nagpur, maharashtra, 44140144140133steel tubes, tubulars and otherwrought steel fittings v2 as per is1239 part 1nitin surendraghodeswarpo:kandri, tah:ramtek, dist:nagpur, maharashtra, 4414014414013steel tubes, tubulars and otherwrought steel fittings v2 as per is1239 part 1nitin surendraghodeswarpo:kandri, tah:ramtek, dist:nagpur, maharashtra, 44140144140114 / 27 steel tubes, tubulars and other wrought steel fittings v2 as per is 1239 part 1 54 metric tonne 5 5 1 2 & & % % % % b b < < % % 4 c4 c b b /minimum 50% and 20% localcontent required for qualifying as class 1 and class 2 local supplier respectivelybis requiredyes w w /technical specifications w / as per gem category speci cation /speci cation w w /specificationname b b u u /bid requirementallowed valuesgoverningspecificationsgoverning specificationsgenerally conforming to is 1239 part 1 - latestmaterial, design &dimensionsmanufacturing process oftubeelectric resistance welded or high frequncyinduction welded erw or hfiwend condition of tubescrewed & socketed endclassification of steel tubedepending on wallthicknessmediumsurface condition of thetubegalvanized tubenominal bore of tube mm100additional specification parameters - steel tubes, tubulars and other wrought steel fittings v2as per is 1239 part 1 54 metric tonne specification parameternamebid requirement allowed valueseligibility criteria:the bidder should upload bis license issued to manufacturer for offereditem valid as on the date of bid opening. copy of the valid bis license shouldbe uploaded, failing which the offer submitted by bidder shall be liable to beignored. make/ manufacturer name and brand name of the offered itemmust be clearly specified by the bidder.pre-qualifying condition:the bidder should have supplied tendered product s during preceding 3financial years i.e. current year and three previous financial years as ondate of opening of the bid as per the following criteria: i single order of atleast 35% of quantity under procurement; or ii two orders of at least 20?chof quantity under procurement; or iii three orders of at least 15?ch ofquantity under procurement.pre-qualifying condition-1:guarantee / warrantee:satisfactory performance certificate issued by respective buyer organizationalong with the above orders should be uploaded with the bid. the materialsupplied shall be guaranteed for a period of 12 months from the date ofreceipt at destination towards manufacturing defect, bad workmanship andsubstandard material. such material shall be replaced by you free of cost.5 / 27 test certificates: quantityvariation : class:the successful bidder shall be required to submit test certificates of theoffered item along with supply, as per is provisions free of cost. thementioned quantity is subject to change 20% and order for such changedquantity shall be placed. supply quantity variation +/- 2% is acceptable.medium.technical specification:galvanised mild steel tube conforming to is 1239 part-i of 2004 with latestamendments & isi mark, continuously welded, electric resistance weldederw, high frequency induction welded hfiw/hot finished welded hfw, screwed on both ends to is:554/86 for pipe threading, suitable for gas, water & steam application, one end socketed and other end protected withplastic thread protector in random lengths of 5 to 7 mtrs., socket to confirmis 1239 part- ii of 1992 in following sizes.specification parameternamebid requirement allowed values* bidders offering must also comply with the additional specification parameters mentioned above. 5 ; 5 ; o %o % 4 4 /input tax credititc and reverse chargercm details 5 ; 5 ; /itc on gst 5 ; 5 ; /itc on gst cess100%na //o ; e o ; e /consignees/reporting officer and quantity5. .5. ./s.no. //o ; e o ; e /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1nitin surendraghodeswar441401, po:kandri, tah:ramtek, dist:nagpur, maharashtra, 4414015460steel tubes, tubulars and other wrought steel fittings v2 as per is 1239 part 1 56 metric tonne 5 5 1 2 & & % % % % b b < < % % 4 c4 c b b /minimum 50% and 20% localcontent required for qualifying as class 1 and class 2 local supplier respectivelybis requiredyes w w /technical specifications* w / as per gem category speci cation /speci cation w w /specificationname b b u u /bid requirementallowed valuesgoverningspecificationsgoverning specificationsgenerally conforming to is 1239 part 1 - latestmaterial, design &dimensionsmanufacturing process oftubeelectric resistance welded or high frequncyinduction welded erw or hfiwend condition of tubescrewed & socketed end6 / 27 classification of steel tubedepending on wallthicknessmediumsurface condition of thetubegalvanized tubenominal bore of tube mm150 /speci cation w w /specificationname b b u u /bid requirementallowed valuesadditional specification parameters - steel tubes, tubulars and other wrought steel fittings v2as per is 1239 part 1 56 metric tonne specification parameternamebid requirement allowed valueseligibility criteria:the bidder should upload bis license issued to manufacturer for offereditem valid as on the date of bid opening. copy of the valid bis license shouldbe uploaded, failing which the offer submitted by bidder shall be liable to beignored. make/ manufacturer name and brand name of the offered itemmust be clearly specified by the bidder.pre-qualifying condition:the bidder should have supplied tendered product s during preceding 3financial years i.e. current year and three previous financial years as ondate of opening of the bid as per the following criteria: i single order of atleast 35% of quantity under procurement; or ii two orders of at least 20?chof quantity under procurement; or iii three orders of at least 15?ch ofquantity under procurement.pre-qualifying condition-1:guarantee / warrantee:satisfactory performance certificate issued by respective buyer organizationalong with the above orders should be uploaded with the bid. the materialsupplied shall be guaranteed for a period of 12 months from the date ofreceipt at destination towards manufacturing defect, bad workmanship andsubstandard material. such material shall be replaced by you free of cost.test certificates: quantityvariation : class:the successful bidder shall be required to submit test certificates of theoffered item along with supply, as per is provisions free of cost. thementioned quantity is subject to change 20% and order for such changedquantity shall be placed. supply quantity variation +/- 2% is acceptable.medium.technical specification:galvanised mild steel tube conforming to is 1239 part-i of 2004 with latestamendments & isi mark, continuously welded, electric resistance weldederw, high frequency induction welded hfiw/hot finished welded hfw, screwed on both ends to is:554/86 for pipe threading, suitable for gas, water & steam application, one end socketed and other end protected withplastic thread protector in random lengths of 5 to 7 mtrs., socket to confirmis 1239 part- ii of 1992 in following sizes* bidders offering must also comply with the additional specification parameters mentioned above. 5 ; 5 ; o %o % 4 4 /input tax credititc and reverse chargercm details 5 ; 5 ; /itc on gst 5 ; 5 ; /itc on gst cess7 / 27 %na 5 ; 5 ; /itc on gst 5 ; 5 ; /itc on gst cess //o ; e o ; e /consignees/reporting officer and quantity5. .5. ./s.no. //o ; e o ; e /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1nitin surendraghodeswar441401, po:kandri, tah:ramtek, dist:nagpur, maharashtra, 4414015660steel tubes, tubulars and other wrought steel fittings v2 as per is 1239 part 1 13 metric tonne 5 5 1 2 & & % % % % b b < < % % 4 c4 c b b /minimum 50% and 20% localcontent required for qualifying as class 1 and class 2 local supplier respectivelybis requiredyes w w /technical specifications* w / as per gem category speci cation /speci cation w w /specificationname b b u u /bid requirementallowed valuesgoverningspecificationsgoverning specificationsgenerally conforming to is 1239 part 1 - latestmaterial, design &dimensionsmanufacturing process oftubeelectric resistance welded or high frequncyinduction welded erw or hfiwend condition of tubescrewed & socketed endclassification of steel tubedepending on wallthicknessmediumsurface condition of thetubegalvanized tubenominal bore of tube mm25additional specification parameters - steel tubes, tubulars and other wrought steel fittings v2as per is 1239 part 1 13 metric tonne specification parameternamebid requirement allowed values8 / 27 eligibility criteria:the bidder should upload bis license issued to manufacturer for offereditem valid as on the date of bid opening. copy of the valid bis license shouldbe uploaded, failing which the offer submitted by bidder shall be liable to beignored. make/ manufacturer name and brand name of the offered itemmust be clearly specified by the bidder.pre-qualifying condition:the bidder should have supplied tendered product s during preceding 3financial years i.e. current year and three previous financial years as ondate of opening of the bid as per the following criteria: i single order of atleast 35% of quantity under procurement; or ii two orders of at least 20?chof quantity under procurement; or iii three orders of at least 15?ch ofquantity under procurement.pre-qualifying condition-1:guarantee / warrantee:satisfactory performance certificate issued by respective buyer organizationalong with the above orders should be uploaded with the bid. the materialsupplied shall be guaranteed for a period of 12 months from the date ofreceipt at destination towards manufacturing defect, bad workmanship andsubstandard material. such material shall be replaced by you free of cost.test certificates: quantityvariation : class:the successful bidder shall be required to submit test certificates of theoffered item along with supply, as per is provisions free of cost. thementioned quantity is subject to change 20% and order for such changedquantity shall be placed. supply quantity variation +/- 2% is acceptable.medium.technical specification:galvanised mild steel tube conforming to is 1239 part-i of 2004 with latestamendments & isi mark, continuously welded, electric resistance weldederw, high frequency induction welded hfiw/hot finished welded hfw, screwed on both ends to is:554/86 for pipe threading, suitable for gas, water & steam application, one end socketed and other end protected withplastic thread protector in random lengths of 5 to 7 mtrs., socket to confirmis 1239 part- ii of 1992 in following sizes.specification parameternamebid requirement allowed values* bidders offering must also comply with the additional specification parameters mentioned above. 5 ; 5 ; o %o % 4 4 /input tax credititc and reverse chargercm details 5 ; 5 ; /itc on gst 5 ; 5 ; /itc on gst cess100%na //o ; e o ; e /consignees/reporting officer and quantity5. .5. ./s.no. //o ; e o ; e /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1nitin surendraghodeswar441401, po:kandri, tah:ramtek, dist:nagpur, maharashtra, 4414011360steel tubes, tubulars and other wrought steel fittings v2 as per is 1239 part 1 33 metric tonne 5 5 1 2 & & % % % % b b < < % % 4 c4 c b b /minimum 50% and 20% localcontent required for qualifying as class 1 and class 2 local supplier respectively9 / 27 bis requiredyes w w /technical specifications* w / as per gem category speci cation /speci cation w w /specificationname b b u u /bid requirementallowed valuesgoverningspecificationsgoverning specificationsgenerally conforming to is 1239 part 1 - latestmaterial, design &dimensionsmanufacturing process oftubeelectric resistance welded or high frequncyinduction welded erw or hfiwend condition of tubescrewed & socketed endclassification of steel tubedepending on wallthicknessmediumsurface condition of thetubegalvanized tubenominal bore of tube mm50additional specification parameters - steel tubes, tubulars and other wrought steel fittings v2as per is 1239 part 1 33 metric tonne specification parameternamebid requirement allowed valueseligibility criteria:the bidder should upload bis license issued to manufacturer for offereditem valid as on the date of bid opening. copy of the valid bis license shouldbe uploaded, failing which the offer submitted by bidder shall be liable to beignored. make/ manufacturer name and brand name of the offered itemmust be clearly specified by the bidder.pre-qualifying condition:the bidder should have supplied tendered product s during preceding 3financial years i.e. current year and three previous financial years as ondate of opening of the bid as per the following criteria: i single order of atleast 35% of quantity under procurement; or ii two orders of at least 20?chof quantity under procurement; or iii three orders of at least 15?ch ofquantity under procurement.pre-qualifying condition-1:guarantee / warrantee:satisfactory performance certificate issued by respective buyer organizationalong with the above orders should be uploaded with the bid. the materialsupplied shall be guaranteed for a period of 12 months from the date ofreceipt at destination towards manufacturing defect, bad workmanship andsubstandard material. such material shall be replaced by you free of cost.test certificates: quantityvariation : class:the successful bidder shall be required to submit test certificates of theoffered item along with supply, as per is provisions free of cost. thementioned quantity is subject to change 20% and order for such changedquantity shall be placed. supply quantity variation +/- 2% is acceptable.medium.10 / 27 technical specification:galvanised mild steel tube conforming to is 1239 part-i of 2004 with latestamendments & isi mark, continuously welded, electric resistance weldederw, high frequency induction welded hfiw/hot finished welded hfw, screwed on both ends to is:554/86 for pipe threading, suitable for gas, water & steam application, one end socketed and other end protected withplastic thread protector in random lengths of 5 to 7 mtrs., socket to confirmis 1239 part- ii of 1992 in following sizes.specification parameternamebid requirement allowed values* bidders offering must also comply with the additional specification parameters mentioned above. 5 ; 5 ; o %o % 4 4 /input tax credititc and reverse chargercm details 5 ; 5 ; /itc on gst 5 ; 5 ; /itc on gst cess100%na //o ; e o ; e /consignees/reporting officer and quantity5. .5. ./s.no. //o ; e o ; e /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1nitin surendraghodeswar441401, po:kandri, tah:ramtek, dist:nagpur, maharashtra, 4414013360steel tubes, tubulars and other wrought steel fittings v2 as per is 1239 part 1 3metric tonne 5 5 1 2 & & % % % % b b < < % % 4 c4 c b b /minimum 50% and 20% localcontent required for qualifying as class 1 and class 2 local supplier respectivelybis requiredyes w w /technical specifications* w / as per gem category speci cation /speci cation w w /specificationname b b u u /bid requirementallowed valuesgoverningspecificationsgoverning specificationsgenerally conforming to is 1239 part 1 - latestmaterial, design &dimensionsmanufacturing process oftubeelectric resistance welded or high frequncyinduction welded erw or hfiwend condition of tubescrewed & socketed endclassification of steel tubedepending on wallthicknessmediumsurface condition of thetubegalvanized tube11 / 27 nominal bore of tube mm15 /speci cation w w /specificationname b b u u /bid requirementallowed valuesadditional specification parameters - steel tubes, tubulars and other wrought steel fittings v2as per is 1239 part 1 3 metric tonne specification parameternamebid requirement allowed valueseligibility criteria:the bidder should upload bis license issued to manufacturer for offereditem valid as on the date of bid opening. copy of the valid bis license shouldbe uploaded, failing which the offer submitted by bidder shall be liable to beignored. make/ manufacturer name and brand name of the offered itemmust be clearly specified by the bidder.pre-qualifying condition:the bidder should have supplied tendered product s during preceding 3financial years i.e. current year and three previous financial years as ondate of opening of the bid as per the following criteria: i single order of atleast 35% of quantity under procurement; or ii two orders of at least 20?chof quantity under procurement; or iii three orders of at least 15?ch ofquantity under procurement.pre-qualifying condition-1:guarantee / warrantee:satisfactory performance certificate issued by respective buyer organizationalong with the above orders should be uploaded with the bid. the materialsupplied shall be guaranteed for a period of 12 months from the date ofreceipt at destination towards manufacturing defect, bad workmanship andsubstandard material. such material shall be replaced by you free of cost.test certificates: quantityvariation : class:the successful bidder shall be required to submit test certificates of theoffered item along with supply, as per is provisions free of cost. thementioned quantity is subject to change 20% and order for such changedquantity shall be placed. supply quantity variation +/- 2% is acceptable.medium.technical specification:galvanised mild steel tube conforming to is 1239 part-i of 2004 with latestamendments & isi mark, continuously welded, electric resistance weldederw, high frequency induction welded hfiw/hot finished welded hfw, screwed on both ends to is:554/86 for pipe threading, suitable for gas, water & steam application, one end socketed and other end protected withplastic thread protector in random lengths of 5 to 7 mtrs., socket to confirmis 1239 part- ii of 1992 in following sizes.* bidders offering must also comply with the additional specification parameters mentioned above. 5 ; 5 ; o %o % 4 4 /input tax credititc and reverse chargercm details 5 ; 5 ; /itc on gst 5 ; 5 ; /itc on gst cess100%na //o ; e o ; e /consignees/reporting officer and quantity12 / 27 . .5. ./s.no. //o ; e o ; e /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1nitin surendraghodeswar441401, po:kandri, tah:ramtek, dist:nagpur, maharashtra, 441401360steel tubes, tubulars and other wrought steel fittings v2 as per is 1239 part 1 1metric tonne 5 5 1 2 & & % % % % b b < < % % 4 c4 c b b /minimum 50% and 20% localcontent required for qualifying as class 1 and class 2 local supplier respectivelybis requiredyes w w /technical specifications* w / as per gem category speci cation /speci cation w w /specificationname b b u u /bid requirementallowed valuesgoverningspecificationsgoverning specificationsgenerally conforming to is 1239 part 1 - latestmaterial, design &dimensionsmanufacturing process oftubeelectric resistance welded or high frequncyinduction welded erw or hfiwend condition of tubescrewed & socketed endclassification of steel tubedepending on wallthicknessmediumsurface condition of thetubegalvanized tubenominal bore of tube mm40additional specification parameters - steel tubes, tubulars and other wrought steel fittings v2as per is 1239 part 1 1 metric tonne specification parameternamebid requirement allowed valueseligibility criteria:the bidder should upload bis license issued to manufacturer for offereditem valid as on the date of bid opening. copy of the valid bis license shouldbe uploaded, failing which the offer submitted by bidder shall be liable to beignored. make/ manufacturer name and brand name of the offered itemmust be clearly specified by the bidder.13 / 27 pre-qualifying condition:the bidder should have supplied tendered product s during preceding 3financial years i.e. current year and three previous financial years as ondate of opening of the bid as per the following criteria: i single order of atleast 35% of quantity under procurement; or ii two orders of at least 20?chof quantity under procurement; or iii three orders of at least 15?ch ofquantity under procurement.pre-qualifying condition-1:guarantee / warrantee:satisfactory performance certificate issued by respective buyer organizationalong with the above orders should be uploaded with the bid. the materialsupplied shall be guaranteed for a period of 12 months from the date ofreceipt at destination towards manufacturing defect, bad workmanship andsubstandard material. such material shall be replaced by you free of cost.test certificates: quantityvariation : class:the successful bidder shall be required to submit test certificates of theoffered item along with supply, as per is provisions free of cost. thementioned quantity is subject to change 20% and order for such changedquantity shall be placed. supply quantity variation +/- 2% is acceptable.medium.technical specification:galvanised mild steel tube conforming to is 1239 part-i of 2004 with latestamendments & isi mark, continuously welded, electric resistance weldederw, high frequency induction welded hfiw/hot finished welded hfw, screwed on both ends to is:554/86 for pipe threading, suitable for gas, water & steam application, one end socketed and other end protected withplastic thread protector in random lengths of 5 to 7 mtrs., socket to confirmis 1239 part- ii of 1992 in following sizes.specification parameternamebid requirement allowed values* bidders offering must also comply with the additional specification parameters mentioned above. 5 ; 5 ; o %o % 4 4 /input tax credititc and reverse chargercm details 5 ; 5 ; /itc on gst 5 ; 5 ; /itc on gst cess100%na //o ; e o ; e /consignees/reporting officer and quantity5. .5. ./s.no. //o ; e o ; e /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1nitin surendraghodeswar441401, po:kandri, tah:ramtek, dist:nagpur, maharashtra, 4414011605 5 : : h h/buyer added bid specific terms and conditions1. genericoption clause: the purchaser reserves the right to increase or decrease the quantity to be ordered upto 25 percent of bid quantity at the time of placement of contract. the purchaser also reserves the right toincrease the ordered quantity up to 25% of the contracted quantity during the currency of the contract atthe contracted rates. the delivery period of quantity shall commence from the last date of originaldelivery order and in cases where option clause is exercised during the extended delivery period the14 / 27 additional time shall commence from the last date of extended delivery period. the additional deliverytime shall be increased quantity original quantity original delivery period in days, subject tominimum of 30 days. if the original delivery period is less than 30 days, the additional time equals theoriginal delivery period. the purchaser may extend this calculated delivery duration up to the originaldelivery period while exercising the option clause. bidders must comply with these terms.2. genericbidder financial standing: the bidder should not be under liquidation, court receivership or similarproceedings, should not be bankrupt. bidder to upload undertaking to this effect with bid.3. genericbidders are advised to check applicable gst on their own before quoting. buyer will not take anyresponsibility in this regards. gst reimbursement will be as per actuals or as per applicable rateswhichever is lower, subject to the maximum of quoted gst %.4. genericbuyer organization specific integrity pact shall have to be complied by all bidders. bidders shall have toupload scanned copy of signed integrity pact as per buyer organizations policy along with bid. click hereto view the file5. genericbidder shall submit the following documents along with their bid for vendor code creation: a. copy of pan card. b. copy of gstin. c. copy of cancelled cheque. d. copy of eft mandate duly certified by bank.6. genericsupplier shall ensure that the invoice is raised in the name of consignee with gstin of consignee only.7. genericwithout prejudice to buyer s right to price adjustment by way of discount or any other right or remedyavailable to buyer, buyer may terminate the contract or any part thereof by a written notice to the seller, if:i the seller fails to comply with any material term of the contract.ii the seller informs buyer of its inability to deliver the materials or any part thereof within thestipulated delivery period or such inability otherwise becomes apparent.iii the seller fails to deliver the materials or any part thereof within the stipulated delivery periodand/or to replace/rectify any rejected or defective materials promptly.iv the seller becomes bankrupt or goes into liquidation.v the seller makes a general assignment for the benefit of creditors.vi a receiver is appointed for any substantial property owned by the seller.vii the seller has misrepresented to buyer, acting on which misrepresentation buyer has placed thepurchase order on the seller.8. genericwhile generating invoice in gem portal, the seller must upload scanned copy of gst invoice and thescreenshot of gst portal confirming payment of gst.9. scope of supplyscope of supply bid price to include all cost components : only supply of goods15 / 27 . purchase preference centrepurchase preference to micro and small enterprises mses: purchase preference will be given to mses asdefined in public procurement policy for micro and small enterprises mses order, 2012 dated23.03.2012 issued by ministry of micro, small and medium enterprises and its subsequentorders/notifications issued by concerned ministry. if the bidder wants to avail the purchase preference, the bidder must be the manufacturer of the offered product in case of bid for supply of goods. traders areexcluded from the purview of public procurement policy for micro and small enterprises. in respect of bidfor services, the bidder must be the service provider of the offered service. relevant documentaryevidence in this regard shall be uploaded along with the bid in respect of the offered product or service. ifl-1 is not an mse and mse seller s has/have quoted price within l-1+ 15% of margin of purchasepreference /price band defined in relevant policy, such seller shall be given opportunity to match l-1price and contract will be awarded for percentage of 25% of total value.11. purchase preference centrepurchase preference linked with local content pp-lc policy:the bid clause regarding preference to make in india products stands modified in this bid and shall begoverned by the pplc policy no. fp-20013/2/2017-fp-png dated 17.11.2020 issued by mop&ng asamended up to date. accordingly, bidders with local content less than or equal to 20% will be treated as non local supplier . the prescribed lc shall be applicable on the date of bid opening. sanctions on thebidders for false / wrong declaration or not fulfilling the local content requirement shall be as per the pplcpolicy. further following additional provisions are added in the certification and verification of local contentprovision of the preference to make in india clause:i. in case of foreign bidder, certificate from the statutory auditor or cost auditor of their own office orsubsidiary in india giving the percentage of local content is also acceptable. in case office orsubsidiary in india does not exist or indian office/subsidiary is not required to appoint statutoryauditor or cost auditor, certificate from practicing cost accountant or practicing charteredaccountant giving the percentage of local content is also acceptable.ii. along with each invoice: the local content certificate issued by statutory auditor on behalf ofprocuring company shall be submitted along with each invoice raised. however, the % of localcontent may vary with each invoice while maintaining the overall % of local content for the totalwork/purchase of the pro-rata local content requirement. in case, it is not satisfied cumulatively inthe invoices raised up to that stage, the supplier shall indicate how the local content requirementwould be met in the subsequent stages.iii. the bidder shall submit an undertaking from the authorized signatory of bidder having the power ofattorney along with the bid stating the bidder meets the mandatory minimum lc requirement andsuch undertaking shall become a part of the contract.12. certificatesbidders offer is liable to be rejected if they dont upload any of the certificates / documents sought in thebid document, atc and corrigendum if any.13. buyer added bid specific atcbuyer added text based atc clausesbidder to confirm clause mentioned in buyer atc in their offer:1. this purchase is also governed by the general terms and conditions: https://gem.gov.in/termscondition 2. delivery schedule: maximum delivery period for offered item should be 60 days from the date of receipt of purchase order. delivery period more than 60 days is not acceptable. o er with delivery period more than 60 days shall be straightway rejected. 3. firm price: prices quoted/bidded shall remain firm till supply is completed satisfactorily in all respects. price variation clause will not be accepted. 4. manufacturer authorization: wherever selling agent/dealer/distributor authorized by the manufacturerare submitting the bid, tender speci c authorization & undertaking certi cate by manufacturer on letter head of pr16 / 27 incipal/manufacturer, mentioning the details such as name, designation, address, e-mail id and phone no., as per annexure-i must be submitted. note: i the authorization should be pre- dated from tender opening date, properly signed and valid.the validity should corresponds to the delivery period stipulated in tender enquiry. ii selling agent/dealer/distributor authorized by the manufacturer shall submit manufacturer authorization as per annexure-i, failing which the offer shall be outrightly rejected. 5. the sellers/bidders who are not in the category of emd exemption: step-i: the intending bidders should submit earnest money of rs.25, 000.00 for schedule-1, rs.25, 000.00 for schedule-2 & rs.25, 000.00 for schedule-3. i.e. rs.75, 000.00 for all 3 schedules mentioned in bid documents to moil ltd., along with their o er otherwise their o er will summarily be rejected. emd should be deposited electronically rtgs/neft from nationalised/ scheduled bank only in the designated account as under: a: name of bank & branch: idbi bank, civil lines branch, nagpurb: account no. 0041102000038465c: ifs code: ibkl0000041 bidder to indicate bid number and name of bidding entity in the transaction details eld at the time of online transfer. bidder has to upload scanned copy/proof of the online payment transfer along with bid. bidders are requested to upload the emd details in format mentioned below. emd should be deposited in one go and exact amount should be re ected in our bank statement on or before the opening date & time of tender, failing which the o er shall be rejected outrightly. step-ii: after remittance of earnest money as above, utr no./reference no. in case of idbi bank should besubmitted by participating bidder in their o er on gem portal. the receipt of emd shall be veri ed by moil ltd., against details of the utr no. /reference no. in case of idbi bank and o ers of those participating bidders whose receipt of emd is confirmed by finance department, moil ltd., shall be considered for further evaluation. in short, mentioning the correct utr no. /reference no. in case of idbi bank in their o er on gem portal is mandatory, failing which the offer shall be rejected outrightly. earnest money by way of demand draft, cheque, bank guarantee, deposit receipt or any other form will not be entertained. i.e. no other mode of payment of emd shall be accepted. emd shall be forfeited if any bidder withdraws their offer before finalization of this tender.note: emd of the successful bidder shall be returned within 30 days of submission of performance bank guarantee/security deposit as per contractual terms or thirty days of successful completion of contract, whichever occurs earlier.format of emd deposited. bid number : name of bidder : bidder pan no. : bidder gstin no. bidder bank account no. bidder bank ifsc code : authorised person name: mobile no.& e-mail id of authorised person : 17 / 27 scheduleno.description of item/categorycorrectutr no. /referenceno.& dateamountrs.1lot no-1 g.i. pipe, size: od:115.0-113.1mm, wall thickness: 4.5 mm, nb: 100mm 25, 000/-2lot no-2 g.i. pipe, size: od: 166.5-163.9mm, wall thickness:4.8mm, nb: 150mm 25, 000/-3lot no-3 g.i. pipe, size: od:34.2 33.3mm, wall thickness: 3.20mm, nb: 25mm 25, 000/-lot no-4 g.i. pipe, size :od: 60.8 59.7mm, wall thickness: 3.60mm, nb: 50mmlot no-5 g.i. pipe, size: od: 21.8 21.0mm, wall thickness: 2.6mm, nb: 15mmlot no-6 g.i. pipe, size :od:48.8 47.9mm, wall thickness: 3.2mm, nb:40mm enclosed: payment receipt towards above utr no. /reference no. signed:designation:corporate seal: 6. for emd exemption bidders: the bidder seeking emd exemption, must submit the valid supporting document for the relevant category as per gem gtc with the bid may refer point no.4xiii, n of gtc general terms & conditions with amendments, if any. under mse category, only manufacturers for goods and service providers for services are eligible for exemption from emd. traders are excluded from the purview of this policy. in absence of valid emd exemption document, the bid will be out- rightly/summarily rejected and no correspondence in this regard shall be entertained. step i: the participating bidders under this category should mandatorily mention the exemption document type in their offer on gem portal.step-ii: upload the relevant document in the upload link on gem portal. the status of mse shall be decided based on the uploaded document and if found in line then only, their offer shall be considered for further evaluation. in short, mentioning the exemption document type in their o er on gem portal & uploading the same on gem portal is mandatory, failing which the o er shall be rejected outrightly. c: psus: state/central govt. organization/psus are exempted from submission of emd/sd. however, they should mandatorily mention the document type in their o er on gem portal for getting exemption andupload the relevant document with their o er on gem portal, failing which the o er shall be rejected outrightly. 18 / 27 . supplier shall ensure that the invoice is raised in the name of consignee with gstin of consignee only. please provide details of contact person name, designation, mobile & e-mail id for correspondence. 7.1 for madhya pradesh state mines/plant: the material shall be despatched & invoiced from supplier s invoicing location & invoice should be generated on consignee as per bid document. i.e. in the tax invoice to be issued by the supplier, ship to party & billed to party will be: consignee as per bid document with gstn: 23aaacm8952a1zt for madhya pradesh state supply. 7.2 for maharashtra state mines/plant: the material shall be despatched & invoiced from supplier s invoicing location & invoice should be generated on consignee as per bid document. i.e. in the tax invoice to be issued by the supplier, ship to party & billed to party will be: consignee as per bid document with gstn: 27aaacm8952a1zl for maharashtra state supply.8. despatch/transportation through registered common carrier: in the event you are successful tenderer and you intend to dispatch/transport the ordered material by road, it will be through registered common carrier as per guidelines mentioned in the carriage by road act 2007 and subsequent amendments if any. in case of non-compliance, action shall be imposed as deemed fit, as per the above mentioned carriage by road act 2007 . 9. performance bank guarantee: it is mandatory on part of supplier to submit the performance bank guarantee @ 5% of total value of order for period of 14 months as mentioned in bid document. - bank details: moil limited, nagpur- name of the bank & branch: idbi bank, gupta house, ravindranath tagore road, civil lines nagpur-440001- ifs code: ibkl0000389- current account no. 041102000018027.- the pbg will be submitted through structured financial management systemsfms platform- performance bank guarantee to be uploaded on gem portal within 15 days of award of contract on gem, as per general terms and conditions gtc on gem, refer clause no. 7, ii. hard copy to be submitted to jgm fin., moil ltd., moil bhawan 1a katol road, nagpur-440013. performance bank guarantee is to be furnished by a speci ed date generally fteen days after noti cation of award and it should remain valid for a period of sixty days beyond the date of completion of all contractual obligations ofthe supplier, including warranty obligations. the performance security will be forfeited in the event of a breach of contract by the bidder/contractor. it shall be refunded to the bidder/contractor without interest, after he duly performs and completes the contract in all respects but not later than sixty days of completion of all such obligations including the warranty under the contract. 10. declaration under companies act:the firm/individual while submitting the tender should submit the under mentioned declaration duly signed. we declare that none of our proprietor / partner / director of the rm/ company has any relationship within the meaning of section 6 of the companies act 2013 with any of the employee working in moil ltd. or director of moil . if the proprietor / partner / director of the rm/ company has any relationship within the meaning of section 6 of thecompanies act 2013 with any of the employee working in moil ltd or director of moil shall declare the same in his bid. 11. arbitration clause: disputes & arbitration for psus only- all the disputes and di erences arising out of or in any way touching or concerning this agreement between the parties shall be resolved by a reference to the permanent machinery of arbitrators pma i.e. to the sole arbitrator in the department of public enterprises as per the o.m. no. 41/2013-dpegm/fts-1835 dated 22/05/2018 issued by the department of public enterprises, ministry ofheavy enterprises govt. of india and for all purposes of the arbitration the rules and procedure prescribed therein shall be applicable . 12. jurisdiction: all questions, disputes or di erences, arising under, outside or in connection with the tender/or19 / 27 der contract shall be subject to the exclusive jurisdiction of the courts at nagpur only. 13. dispute: in the event of dispute arising out of this contract, the decision of chairman-cum managing director moil ltd. shall be final & binding. 14. no deviation certificate: we certify that, there is no deviation in the o er submitted by us, from the bid/tender terms & conditions on gem portal. in case if there is any di erence in any terms & conditions, the same may be ignored and considered to have been accepted by us into to as per bid document on gem . bidder to upload the no deviation certificate . 15. revised public procurement preference to make in india: it is certified that the tender is compliant to ppp mii order & shall be nalised keeping in view of all its updates. the instant tender shall be inter-alia subject to revised public procurement preference to make in india, order 2017 revision, as amended from time to time bearing no. p-45021/2/2017 pp be-ii issued by the government of india, ministry of commerce and industry, department for promotion of industry and internal trade public procurement section dated 16/09/2020. the tenderers who wish to take the preference under the said order dated 16/09/2020 shall mandatorily be required to submit the requisite documents as prescribed under the public procurement preference to make in india, order 2017- revision. only after satisfactory submission of the requisite documents bene ts under the aforesaid order shall be provided. revised order or any updates may be accessed at dpiits website: https.dipp.gov.in/public-procurements only to facilitate, we may request to refer clause no.9a & b of above order towards verification of local content reproduced hereunder and upload as applicable: a. the class-i local supplier / class-ii local supplier at that time of tender, bidding or solicitation shall be requiredto indicate percentage of local content and provide self-certi cation that, the item o ered meets the local content requirement for class-i local supplier / class-ii local supplier, as the case may be. they shall also give details of the locations at which the local value addition is made. b. in cases of procurement for a value in excess of rs.10 crores, the class-i local supplier / class-ii local supplier shall be required to provide a certificate from i statutory auditor or cost auditor of the company in the case of companies orii a practicing cost accountant or practicing chartered accountant in respect of suppliers other than companies giving the percentage of local content. in event of non-submission of the above documents, your offer shall be liable to be ignored. kindly upload the certi cate giving the percentage %of local content and give details of the locations/addresss at which the local value addition is made. as per revised public procurement preference to make in india, order 2017, on 16/09/2020 enclosed, clause no.3, bidder to mention in which category their firm belong i.e. class-i local supplier/ class-ii local supplier/ non-local supplier. kindly upload the certificate by mentioning the class. in view of above, you are requested to kindly provide the self-certi cation as we certify that items o ered/quoted in tender has got % of local content and the details of the locations at which the local value addition is made is . bidder to submit the % of local content & location of local content with their offer. 16. restrictions on public procurement from certain countries: in this regard bidder may please refer o ce memorandum no. 6/18/2019-ppd dt.23-07-2020 & subsequent orders issued by public procurement division, department of expenditure, ministry of finance, government of india towards restrictions on public procurement from certain countries. referring to the above, the local suppliers should submit the certificate as under: we have read the clauses regarding restrictions on procurement from a bidder of a country which shares a land border with india and we hereby certify that our firm is not from such a country and is eligible to be considered . 17. bidder to con rm location from where the materials shall be invoiced upto destination basis as per consignee mentioned in bid document complete address, name of the bidder company/firm along with telephone no. & fax no., name of person, mobile no., e-mail id of the bidder to be given. 18. past supplies: bidders is requested to submit/upload the supply order copies for tendered items as docu20 / 27 mentary evidence towards past supplies from govt. deptt./govt. undertaking, enterprises/customer. 19. taxes: payment of tax is primarily the responsibility of the seller and will not be paid unless it is clearly shown on the quotation as payable extra. any change in taxation during the tenure of contract, will be as per applicable statute. under gst regime registration under gst is made mandatory. you shall mention your gst provisional id s incase your supply is from more than one location mention all relevant gst s in the quotation. offers received from company/ rm/individual without gst provisional id s are liable to be rejected provided they fall within the preview of gst. timely compliance of gst provisions and ling of gst returns is the responsibility of the bidder. any non-compliance may result in withholding of bills partly or fully until it is reflected in form gstr-2a. 19.1 tds under gst shall be deducted as per the applicable gst provisions. 20. bidder/supplier to ensure that the validity of the statutory certi cate /competency certi cate shall be valid during tender finalization and execution stage. 20.1 test certificate: the successful bidder shall be required to submit test certi cates of the o ered item along with supply, as per is provisions free of cost. 21. bidder to submit itr/profit & loss statement/balance sheet to substantiate applicability of gst. 22. treds platform: it may be noted that government of india has implemented trade receivable discounting system treds to address challenges faced by msmes in delayed payments after receipt/acceptance of material/services from government buyers leading to shortfall of working capital. treds is an online electronic institutional mechanism for facilitating the nancing of trade receivables of msmes through multiple nanciers. moil ltd., is already registered on the following treds platform: m/s. a. treds invoicemart, mumbai msme bidders are required to register on the treds platform. the msme vendors can avail the treds facility, if they want to . all mse vendors/suppliers are advised to get themselves registered on treds platform www.treds.in accordingly. 23. bidders who have not performed satisfactorily in the earlier tenders/work orders or have violated the terms of nit, moil ltd. reserves the right to dis-qualify that bidder. 24. integrity pact:a the bidder is required to submit the integrity pact agreement duly lled, scanned & signed by authorized signatory of tender as per enclosed annexure along with the tender document & upload. b a person signing ip shall not approach the courts while representing the matters to iems and he/ she will await their decision in the matter. the details of independent external monitor iem nominated for this tender are given here as under: name of independent external monitor iem: i shri. cmde rakesh anand, e-mail:- ansem 2000@yahoo.com ii shri. nand kumar mishra, e-mail:- lambodhar2021@gmail.com adidev2014@gmail.com 25. details of the location of mines & plants situated: 21 / 27 name of mines & postal addressoff day/authorityto be contactedkandri minepo-kandri, tah ramtek, distt.- nagpur ms, pin: 441401.tel.: 07114-268179 off.268149 res., 268150noskandrithursday mine manager note: bidder to confirm / accept above clauses along with their offer on gem:sign. & date of authorised signatory: name of authorised signatory: designation of authorised signatory: seal of firm: 26. for technical clarifications if any, you may contact: mr. atul sharma, jt.gmmech., moil bhawan, 1a, katol road, nagpur-440 013. mobile no. 7709045650 email: ats@moil.nic.in for commercial clarifications if any, you may contact: mr. d. i. khan, agmmaterials, moil bhawan, 1a, katol road, nagpur-440 013. contact no. 0712-2806140 mobile no. 7387411115 email: khan@moil.nic.in 27. annexure-a format for undertaking to be submitted/uploaded by bidder along with the tender documents i name and designation appointed as the attorney/ authorized signatory of the bidder including its constituents m/s. hereinafter called the bidder the purpose of the tender documents for .as per the tender no of moil, do hereby solemnly a rm and state on the behalf of the bidder including its constituents as under: 22 / 27 . i/we the bidders am/are signing this document after carefully reading the contents of the above mentioned tender. 2. i/we declare and certify that i/we have not made any misleading or false representation anywhere in the tendersubmitted including the annexure thereto. 3. i/we also understand that my/ our o er will be evaluated based on the documents/credentials submitted along with the offer and same shall be binding upon me/us. 4. i/we declare that the information and documents submitted along with the tender documents by me/ us are complete and correct and i/we are fully responsible for the authenticity and correctness or the information and documents, submitted by us. 5. i/we understand that at any time during process for evaluation of tenders, if any information / document submitted by me / us are found to be suppressing facts / forged / false / fabricated / fudged or incorrect, it shall lead to forfeiture of the emd, if submitted and initiating any legal action as deemed t the moil. further, i/we...........................name of the bidder and all my/ our constituents understand that my/ our offer shall be summarily rejected. 6. i/we also understand that at any time after award of contract, if the certi cates submitted by me / us are found to be suppressing facts / false/ forged/ fabricated / fudged or incorrect, it may lead to termination of the contract, along with forfeiture of emd / sd and performance guarantee if submitted, besides any other action provided in the contract and initiating any legal action as deemed fit by moil. 7. we declare that none of our proprietor / partner / director of the rm/ company has any relationship within themeaning of section 6 of the companies act 2013 with any of the employee working in moil ltd or director of moil . 8. we have read the clause regarding restrictions on procurement from a bidder of a country which shares a land border with india and we hereby certify that our firm is not from such country and is eligible to be considered . 9. we certify that, there is no deviation in the o er submitted by us, from the bid/tender terms & conditions on gem portal. in case if there is any di erence in any terms & conditions, the same may be ignored and considered to have been accepted by us in to to as per bid document on gem . 10. despatch/transportation through registered common carrier:in the event you are successful tenderer and you intend to dispatch/transport the ordered material by road, it will be through registered common carrier as per guidelines mentioned in the carriage by road act 2007 and subsequent amendments if any. in case of non-compliance, action shall be imposed as deemed t, as per the above mentioned carriage by road act 2007 . seal and signature of the bidder place: date:23 / 27 28. annexure - bformat of non-collusive tendering certificateto be signed by an authorised person on the tenderer s behalf to, moil limited, nagpur. dear sir/ madam, non-collusive tendering certificate for rfq/ tender no. date 1. we, names of the tenderers of address es of the tenderers refer to the bid/ o er against the tender . 2. non-collusionwe represent and warrant that in relation to the tender: a our bid was developed genuinely, independently and made with the intention to accept the contract it awarded; b our bid was not prepared with any agreement, arrangement, communication, understanding, promise of undertaking with any person including any other tenderer or competitor regarding:i prices;ii methods, factors or formulas used to calculate prices;iii an intention or decision to submit a bid;iv an intention or decision to withdraw a bid;v the submission of bid that does not conform with the requirements of the tender;vi the quality, quantity, speci cations or delivery particulars of the products or services to which this tender relates; andvii the terms of the bid, and we undertake that we will not, prior to the award of the contract, enter into or engage in any of the foregoing. 3. disclosure of in case of job/ project contractswe understand that we are required to disclose all intended sub-contracting arrangements relating to the tender tothe plants/ mines--------, moil limited, place -------------, including those which are entered into after the contract is awarded. we warrant that we have duly disclosed and will continue to disclose such arrangements to the plants/ mines --------, moil limited, place ------. 4. consequences of breach or non-compliancewe understand that in the event of any breach or non-compliance with any warranties or undertakings in this certi cate, the plants/ mines, moil limited, place may, at its discretion, invalidate our bid, exclude us in future tenders, pursue damages or other forms of redress from us including but not limited to damages for delay, costs and expenses of re-tendering and other costs incurred, and /or in the event that we are awarded the contract terminate the contract. signed for and on behalf of the tenderersignature: 24 / 27 name:position:date: 29. annexure - i authorization & undertaking certificate by manufactureron letter head of the principal / manufacturerto, moil limited, moil bhavan, 1-a, katol road, nagpur 440013. sub: gem bid no.: . dear sir, whereas we, m/s name of manufacturer who are established and reputable manufacturers of tendered/offered items having factories at addresses of factoryies, do hereby authorize m/ name & address our agent to submit a bid and execute the resultant contract with you on our behalf against the above tender. we, m/s name of manufacturer also undertake the following: i that, as a matter of our corporate policy, we do not directly quote/ market our products directly to any organization in india except in situations like supplies to oem /oes/ opm, supplies of spares and consumables bundled with supply of equipment, supplies to customers not covered by dealer network due to geographical/ logistics constraints. ii that we will accept the responsibility for the satisfactory execution of orders placed on our authorized agent including warranty/ guarantee obligations. iii that, wherever necessary, we will provide requisite inspection and testing facilities at our works in respect of orders placed on our authorized agent. iv our authorized agents price will not exceed that which we would have quoted. v we hereby accept to extend our full support and commitment for all the terms and conditions including guarantee and warranty as per the conditions of contract, technical speci cations for the goods and services o ered for supply by the above bidder on our behalf against this tender for the entire

Central Government/Public Sector

TRN :35196349 | 30 Aug, 2025

Tender Value : 0

Jalandhar - Punjab

Tender for gem bids for tss, clutch cover 352 dia, clutch disc 352 dia, gear flywheelring, oil seal, tube fuel supply, brush carrier assy

Central Government/Public Sector

TRN :35196422 | 30 Aug, 2025

Tender Value : 0

Darjeeling - West Bengal

Tender for gem bids for mt, armature assy, field coil, repair kit spring brake actuator, shifting lever, hose, clutch booster, clutch master cyl, tank coolant vehicular, pipe assy air supply, hose -ab 309, brush carrier, door beading

Central Government/Public Sector

TRN :35196900 | 01 Sep, 2025

Tender Value : 0

Dang - Gujarat

Tender for gem bids for carrier based consortia v2 q3

State Government

TRN :35196937 | 01 Sep, 2025

Tender Value : 0

Raipur - Chhattisgarh

Tender for gem bids for carrier based consortia v2 q3

Central Government/Public Sector

TRN :35197226 | 01 Sep, 2025

Tender Value : 0

Bhopal - Madhya Pradesh

Tender for gem bids for mt, solenoid 24v, bush electrical contact, bendex drive, brake light assy, clutch plate, pipe intake, speedometercable, parts kit piston assy compressor, pressureregulator, combination switch, brush carrier plate, partskit hose non metallic, field cold als

Co-operative

TRN :35199394 | 28 Aug, 2025

Tender Value : 0

Pilibhit - Uttar Pradesh

Tender for tender for cane carrier feeding work

State Government

TRN :35199483 | 03 Sep, 2025

Tender Value : 6.00 Lacs

Banaskantha - Gujarat

Tender for gem bids for vaccine carrier q3

Related Searched Keywords : carrier

List of carrier Tenders

Tender for gem bids for boq, positioner assy, hand brake cable, gear lever kitnm, brush carrier assy, major repair kit aircompressor, tapper roller bearing front hub, flexible hose assy, brake shoe lining set, oil seal

Tender for gem bids for tss, clutch cover 352 dia, clutch disc 352 dia, gear flywheelring, oil seal, tube fuel supply, brush carrier assy

Tender for gem bids for mt, armature assy, field coil, repair kit spring brake actuator, shifting lever, hose, clutch booster, clutch master cyl, tank coolant vehicular, pipe assy air supply, hose -ab 309, brush carrier, door beading

Tender for gem bids for carrier based consortia v2 q3

Tender for gem bids for carrier based consortia v2 q3

Tender for gem bids for mt, solenoid 24v, bush electrical contact, bendex drive, brake light assy, clutch plate, pipe intake, speedometercable, parts kit piston assy compressor, pressureregulator, combination switch, brush carrier plate, partskit hose non metallic, field cold als

Tender for tender for cane carrier feeding work

Tender for gem bids for vaccine carrier q3

Get carrier Tender Alert...

Related Searched Keywords : carrier

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us