Indian Tenders Tender information of India
Global Tenders International Tender information
Projects Project information of India
Tender Awarded Tender awarded information
Sub-Contractor Vendor information of India
Pay Online
Register now
Login
Contact Info All India : 9276083333 / 9274315555 South India : 9274315555

Filters

List of aluminium-grating Tenders

List of latest aluminium-grating Tenders in Indian Tenders. Click on any aluminium-grating Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for aluminium-grating Tenders.

All-Tenders (8)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :35559003 | 16 Oct, 2025

Tender Value : 25.85 Lacs

Jaipur - Rajasthan

Tender for earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils "pcc in foundation : providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)." providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).floor random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in: cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for foundation, footings, strap beam, raft, base of column etc centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc. centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for columns, pillers, posts,and struts etc "providing and laying in position specified grade of cement concrete for all rcc structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. m20 grade nominal mix / design mix add extra for providing richer mixes respectively at all floor levels providing m-25 grade concrete by using cement as per codal provision instead of m-20 grade design mix." "providing and laying in position specified grade of cement concrete for all rcc structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. m20 grade nominal mix / design mix" providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.m20 grade nominal mix / design mix add extra for providing richer mixes respectively at all floor levelsproviding m-25 grade concrete by using cement as per codal provision instead of m-20 grade design mix. supply & stacking good soil of earth at site complete including loading unloading & transportation etc.good soil of earthfilling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. stone kharanja : random rubble dry stone kharanja under floor. brick work with clay flyash f.p.s. brick (is 13757- 1993 ) of class designation 75 in superstructure above plinth level upto floor five level in : cement mortar 1 : 6 (1 cement : 6 coarse sand) providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) providing and fixing m.s. sheet 1mm thick single leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint extra for double leaf shutters. providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (is 1038-1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required :partly fixed and partly openable [ fixed area not to exceed 33%] supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. guard bars : providing and fixing square bars or other flat welded to window, ventilatiors etc. kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm internal plaster : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :12mm thick. external plaster : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. plaster (ceiling): 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand) grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m15 grade nominal mix 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete internal finishing: distempering with oil bound washeble distemper of approved brand and manufacture to give an even shade including all scaffolding new work (two or more coats) over and including scrapping and priming coat with cement primer finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). panting on doors & windows :- painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work providing and fixing in cm 1 : 4 double paitam (rebated) stone door window and ventilator frames of approved quarry:size 125 x 100mm p&f rigid pvc pipe (is:4985 mark) class ii(4 kg. /cm.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant 110mm dia p&f rigid pvc pipe fittings (is: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: bend 87.5 110mm dia pipe clip 110mm dia wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of 240/415 v ac mcb with positive isolation of breaking capacity not less than 10 ka (b/ c tripping characteristic as per type of load and site requirement) 4kv impulse withstand voltage, as per pwd specification for electrical works with isi marked is 8828(1996) / conforming to iec 60898-1 2002, iec 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per iec, minimum phase termination capacity of 35sq.mm. , conductorline load reversibility, label holding facility , ip 20 contact protection and fitted with existing distribution board/sheets, min. operation 20,000 upto 32 a rating and 10,000 upto 63 a, 5000 for 80 a rating including making connections, testing etc. as required. . oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .6a to 32a rating. 50 a to 63a rating providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed un-arrmoured aluminium cable confirming to is:1554 p-i / is :7098 p - i of 1.1 kv with h4- grade electrolytic aluminium conductor confirming to is 8130 of purity >99.6 %, inner / outer sheath confirming to is:5831 in existing rcc / hume / stoneware / pvc pipe/ open duct/cable trench / cable tray (with cable tie) including testing etc. as required of following size. oem must have it's own in house nabl accrediated laboratory for testing procedure as per is:10810. for additional technical parameters of product / work refer annexure 'a' attached with this bsr 6.0 sq. mm 4 core providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating p & f isi marked (is:3854) 6 amp. flush type non modular switch with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material including cutting hole in tile and making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of of 3/5 pin 6 amp. flush type non modular socket made out from industrial grade polycarbonate or fire resistant abs material, brass terminal with porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . "earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils " "pcc in foundation : providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)." random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in: cement mortar 1:6 ( 1-cement : 6-sand). centering and shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc. centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.m20 grade nominal mix supplying and filling in plinth with blown sand under floors including watering ramming consolidating and dressing complete including cost of sand. stone kharanja : random rubble dry stone kharanja under floor. brick work with clay flyash f.p.s. brick of class designation 75 in superstructure above plinth level upto floor five level in : cement mortar 1 : 4 (1 cement : 4 coarse sand) beam:- providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) providing and fixing m.s. sheet 1mm thick single leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint extra for double leaf shutters. glazed windows : providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required : windows side hung /ventilators top or centre hung (openable) supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. guard bars : providing and fixing square bars or other flat welded to window, ventilatiors etc. kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm internal plaster : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :12mm thick. external plaster : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. plaster (ceiling): 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand) grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. painting exterior surface of wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including sand papering, prime coat, making smooth surface with cement based putty etc complete in all respect: . new work panting on doors & windows :- painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work door frames:-providing and fixing in cm 1 : 4 double paitam (rebated) stone door window and ventilator frames of approved quarry :size 100 x 75mm. p&f rigid pvc pipe (is:4985 mark) class ii(4 kg. /cm.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant 110mm dia p&f rigid pvc pipe fittings (is: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: bend 87.5 110mm dia pipe clip 110mm dia wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of 240/415 v ac mcb with positive isolation of breaking capacity not less than 10 ka (b/ c tripping characteristic as per type of load and site requirement) 4kv impulse withstand voltage, as per pwd specification for electrical works with isi marked is 8828(1996) / conforming to iec 60898-1 2002, iec 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per iec, minimum phase termination capacity of 35sq.mm. , conductorline load reversibility, label holding facility , ip 20 contact protection and fitted with existing distribution board/sheets, min. operation 20,000 upto 32 a rating and 10,000 upto 63 a, 5000 for 80 a rating including making connections, testing etc. as required. . oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .6a to 32a rating. 50 a to 63a rating providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed un-arrmoured aluminium cable confirming to is:1554 p-i / is :7098 p - i of 1.1 kv with h4- grade electrolytic aluminium conductor confirming to is 8130 of purity >99.6 %, inner / outer sheath confirming to is:5831 in existing rcc / hume / stoneware / pvc pipe/ open duct/cable trench / cable tray (with cable tie) including testing etc. as required of following size. oem must have it's own in house nabl accrediated laboratory for testing procedure as per is:10810. for additional technical parameters of product / work refer annexure 'a' attached with this bsr 6.0 sq. mm 4 core providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating p & f isi marked (is:3854) 6 amp. flush type non modular switch with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material including cutting hole in tile and making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of of 3/5 pin 6 amp. flush type non modular socket made out from industrial grade polycarbonate or fire resistant abs material, brass terminal with porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . "earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils " pcc in foundation : providing and laying in position cement concrete including curing compaction etc. complete in spcified grade excluding the cost of centering and shuttering all work upto plinth level 1:4:8(1 cement:3 coarse sand :6 graded stone aggregate 40 mm nominal size). random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in cement mortat 1:6 (1-cement: 6- sand) centering and shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation, footings, strap beam, raft, bases of columns etc. providing and laying in position specified grade of cement concrete for all rcc structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement m20 grade nominal mix / design mix brick work with clay flyash f.p.s. brick (is 13757- 1993 ) of class designation 75 in superstructure above plinth level upto floor five level in : cement mortar 1 : 6 (1 cement : 6 coarse sand) half brick work with mechanised autoclaved flyash lime bricks conforming to is: 12894 :2002 of class designation 100 in superstructure above plinth level upto floor v level in. c.m.1:4 "supplying and fixing stone lintels/bed plates of approved quarry rough dressed in cement mortar 1:4 upto 15 cm. thick:" centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. "providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc. m20 grade nominal mix / design mix " stone kharanja: random rubble dry stone kharanja under floor "providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size)." providing & fixing ist quality standard white, gray, ivory,fume red brown, light green, light blue and other light shades glazed tiles confirming to is : 13753 and is: 15622 of size 300mm x 200mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster on walls and piller) providing and fixing 1st quality mat finished ceremic tile size 300x300mm confirming to is : 13755 and is : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). door frames : p & f t- iron frames for doors , windows and ventilators of mild steel , tee section joints mitred and welded with 15x3 mm lugs 10 cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement:3 fine sand6 graded stone aggregate 20 mm nominal size:) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinged and screws and applying a priming coat of approved steel primer providing and fixing m.s. sheet 1mm thick single leaf door shutter windows in angle iron frame 35x35x5 mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3 - fine sand) internal plaster :plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished : 12mm thick external plaster : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished 20 mm thick grading roof for water proofing treatment cement concrete 1: 2: 4 (1 cement: 2 course sand: 4 greded stone aggregate 20 mm nominal size) "providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (is 1038- 1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sashputty of approved make or metal beading with screwscomplete including priming coat of approval steel primer,excluding the cost of metal beading and other fitting exceptnecessary hinges of pivots steel handles peg stay etc. asrequired partly fixed and partly openable [ fixed area not to exceed33%]" "supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance" providing and fixing square bars or other flat welded to window, ventilatiors etc.12mm dia providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer "finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm )." panting on doors & windows :- painting with syntheitic enamel paint of approved brand and manufacture in all shade to give an even shade new steel work (2 or more coat on new work). copping: cement concrete flooring 1:2:4 (1 cement: 2 course sand: 4 greded stone aggregate) finishing with a floating coat of neat cement including cement slurry, making of lines or groove etc. complete but excluding the cost of nosing of steps etc. complete : 40mm thick with 20mm thick nominal size aggregate. chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) light shade using shade cement.p providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge. (concealed work including cutting chases and making good the walls etc.,)20mm nominal outer dia pipes 25 mm nominal outer dia pipes p & f indian type white glazed vitreous china 1st quality w.c. orissa pan (is :2556 mark) with 100 mm vitreous china p or s trap including cutting and making good the wall and floor: size 530410mm "p & f wvc wash basin (1st quality, i.s. : 2556 mark) of approved make with c.i. brackets duly painted, 1 no. 15 mm c.p. pillar cock (is : 8934 mark) & 32 mm c.p. brass waste coupling of approved make,25 mm g.i. waste pipe complete including cutting & making good the wall.: 450 x 300 mm " p & f bib cock (is : 8931 mark) superior quality of approved make.c.p. brass 400 gm, 15 mm nominal bore. p & f inlet connection (angle valves) superior quality of approved make c.p. intel connection 15 mm brass (is : 8931) p&f rigid pvc pipe (is:4985 mark) class ii/ (4 kg. /cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 110 mm dia p & f low level flushing cistern of 10 litres capacity (is : 2556mark). of approved make with complete fittings c.i. brackets duly painted, brass ball cock with ball, (is: 1703 mark) complete including cutting and making good the wall:pvc with pvc bend and superior internal fittings as per is :7231 p&f rigid pvc pipe fittings (is: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: bend 87.5 110mm dia p&f rigid pvc pipe fittings (is: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant plain floor trap 110 mm dia p&f rigid pvc pipe fittings (is: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant p-trap 110 mm dia p&f rigid pvc pipe fittings (is: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant vent cowel 110 mm dia s/f rcc main hole covers with frame of approved make (light duty) size 450x450 mm p/f grating of approved quality stainiese steet sheet size 125 mm dia construction of soakage well in all types of soil of approved drawing , top 90 cm portion in 450 mm thick with cement mortar 1:6 80 mm stone slab covering jointing of slab in cm 1 : 3, ralthal, kharanja, 40 mm thick m-15 grade c.c. flooring earthwork etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr.inner dia 90 cm & 10 to 12 m deep construction of chamber in all types of soil with 300 mm thick masnory in cm. 1 : 6, 100 mm thick c.c. 1 : 5 : 10 in foundation , 20 mm thick inside plaster in cm 1 : 6, finished with floating neat cement 50 mm thick m-15 grade c.c. flooring earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr.inside size 450 x 450 mm depth upto 0.5 m & 5 kg ci cover with frame. p & f ball cock (is : 1703 mark) with rod & p.v.c. ball complete.brass wt. 300 gm, 15 mm p & f 15 mm dia connection pipe of approved quality make pvc pipes with nuts 450 mm. p & f stop cock (is:8931 mark),superior quality and of approved mark: brass 400 gm. 15 mm nominal bore p & f pvc storage tank isi marked ( is : 12701) indicating the bis license no. of approved make with cover , 25mm dia 1 m long g.i. overflow pipe & 25 cm long wash out pipe with plug & socket including making connection etc. complete of approved design 500 litres capacity wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 25 mm dia supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x 1.5 sq. mm 2 x 2.5 sq. mm providing & fixing of heavy duty capacitor start, copper woind double ball bearing 900/1400 rpm single phase exhaust fan as per pwd specification for electrical works, conforming to is:2312 isi marked in existing opening including making connections testing etc. as required. oem shall be an iso certified company. appropriate oem test certificate shall be submitted by contractor. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 300 mm sweep (900/1400 rpm) earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils "pcc in foundation : providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)." providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).floor random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in: cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for foundation, footings, strap beam, raft, base of column etc centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc. centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for columns, pillers, posts,and struts etc "providing and laying in position specified grade of cement concrete for all rcc structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. m20 grade nominal mix / design mix add extra for providing richer mixes respectively at all floor levels providing m-25 grade concrete by using cement as per codal provision instead of m-20 grade design mix." "providing and laying in position specified grade of cement concrete for all rcc structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. m20 grade nominal mix / design mix" providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.m20 grade nominal mix / design mix add extra for providing richer mixes respectively at all floor levelsproviding m-25 grade concrete by using cement as per codal provision instead of m-20 grade design mix. supply & stacking good soil of earth at site complete including loading unloading & transportation etc.good soil of earthfilling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. stone kharanja : random rubble dry stone kharanja under floor. brick work with clay flyash f.p.s. brick (is 13757- 1993 ) of class designation 75 in superstructure above plinth level upto floor five level in : cement mortar 1 : 6 (1 cement : 6 coarse sand) providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) providing and fixing m.s. sheet 1mm thick single leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint extra for double leaf shutters. providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (is 1038-1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required :partly fixed and partly openable [ fixed area not to exceed 33%] supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. guard bars : providing and fixing square bars or other flat welded to window, ventilatiors etc. kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm internal plaster : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :12mm thick. external plaster : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. plaster (ceiling): 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand) grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m15 grade nominal mix 1: 2: 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete internal finishing: distempering with oil bound washeble distemper of approved brand and manufacture to give an even shade including all scaffolding new work (two or more coats) over and including scrapping and priming coat with cement primer finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). panting on doors & windows :- painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work providing and fixing in cm 1 : 4 double paitam (rebated) stone door window and ventilator frames of approved quarry:size 125 x 100mm p&f rigid pvc pipe (is:4985 mark) class ii(4 kg. /cm.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant 110mm dia p&f rigid pvc pipe fittings (is: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: bend 87.5 110mm dia pipe clip 110mm dia wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of 240/415 v ac mcb with positive isolation of breaking capacity not less than 10 ka (b/ c tripping characteristic as per type of load and site requirement) 4kv impulse withstand voltage, as per pwd specification for electrical works with isi marked is 8828(1996) / conforming to iec 60898-1 2002, iec 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per iec, minimum phase termination capacity of 35sq.mm. , conductorline load reversibility, label holding facility , ip 20 contact protection and fitted with existing distribution board/sheets, min. operation 20,000 upto 32 a rating and 10,000 upto 63 a, 5000 for 80 a rating including making connections, testing etc. as required. . oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .6a to 32a rating. 50 a to 63a rating providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed un-arrmoured aluminium cable confirming to is:1554 p-i / is :7098 p - i of 1.1 kv with h4- grade electrolytic aluminium conductor confirming to is 8130 of purity >99.6 %, inner / outer sheath confirming to is:5831 in existing rcc / hume / stoneware / pvc pipe/ open duct/cable trench / cable tray (with cable tie) including testing etc. as required of following size. oem must have it's own in house nabl accrediated laboratory for testing procedure as per is:10810. for additional technical parameters of product / work refer annexure 'a' attached with this bsr 6.0 sq. mm 4 core providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating p & f isi marked (is:3854) 6 amp. flush type non modular switch with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material including cutting hole in tile and making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of of 3/5 pin 6 amp. flush type non modular socket made out from industrial grade polycarbonate or fire resistant abs material, brass terminal with porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . "earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sum on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils " "pcc in foundation : providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)." random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in: cement mortar 1:6 ( 1-cement : 6-sand). centering and shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc. centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.m20 grade nominal mix supplying and filling in plinth with blown sand under floors including watering ramming consolidating and dressing complete including cost of sand. stone kharanja : random rubble dry stone kharanja under floor. brick work with clay flyash f.p.s. brick of class designation 75 in superstructure above plinth level upto floor five level in : cement mortar 1 : 4 (1 cement : 4 coarse sand) beam:- providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) providing and fixing m.s. sheet 1mm thick single leaf door shutter in angle iron frame 35x35x5mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint extra for double leaf shutters. glazed windows : providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required : windows side hung /ventilators top or centre hung (openable) supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. guard bars : providing and fixing square bars or other flat welded to window, ventilatiors etc. kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm internal plaster : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :12mm thick. external plaster : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. plaster (ceiling): 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand) grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. painting exterior surface of wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including sand papering, prime coat, making smooth surface with cement based putty etc complete in all respect: . new work panting on doors & windows :- painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work door frames:-providing and fixing in cm 1 : 4 double paitam (rebated) stone door window and ventilator frames of approved quarry :size 100 x 75mm. p&f rigid pvc pipe (is:4985 mark) class ii(4 kg. /cm.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant 110mm dia p&f rigid pvc pipe fittings (is: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: bend 87.5 110mm dia pipe clip 110mm dia wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of 240/415 v ac mcb with positive isolation of breaking capacity not less than 10 ka (b/ c tripping characteristic as per type of load and site requirement) 4kv impulse withstand voltage, as per pwd specification for electrical works with isi marked is 8828(1996) / conforming to iec 60898-1 2002, iec 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per iec, minimum phase termination capacity of 35sq.mm. , conductorline load reversibility, label holding facility , ip 20 contact protection and fitted with existing distribution board/sheets, min. operation 20,000 upto 32 a rating and 10,000 upto 63 a, 5000 for 80 a rating including making connections, testing etc. as required. . oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .6a to 32a rating. 50 a to 63a rating providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed un-arrmoured aluminium cable confirming to is:1554 p-i / is :7098 p - i of 1.1 kv with h4- grade electrolytic aluminium conductor confirming to is 8130 of purity >99.6 %, inner / outer sheath confirming to is:5831 in existing rcc / hume / stoneware / pvc pipe/ open duct/cable trench / cable tray (with cable tie) including testing etc. as required of following size. oem must have it's own in house nabl accrediated laboratory for testing procedure as per is:10810. for additional technical parameters of product / work refer annexure 'a' attached with this bsr 6.0 sq. mm 4 core providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating p & f isi marked (is:3854) 6 amp. flush type non modular switch with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material including cutting hole in tile and making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of of 3/5 pin 6 amp. flush type non modular socket made out from industrial grade polycarbonate or fire resistant abs material, brass terminal with porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . "earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils " pcc in foundation : providing and laying in position cement concrete including curing compaction etc. complete in spcified grade excluding the cost of centering and shuttering all work upto plinth level 1:4:8(1 cement:3 coarse sand :6 graded stone aggregate 40 mm nominal size). random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in cement mortat 1:6 (1-cement: 6- sand) centering and shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation, footings, strap beam, raft, bases of columns etc. providing and laying in position specified grade of cement concrete for all rcc structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement m20 grade nominal mix / design mix brick work with clay flyash f.p.s. brick (is 13757- 1993 ) of class designation 75 in superstructure above plinth level upto floor five level in : cement mortar 1 : 6 (1 cement : 6 coarse sand) half brick work with mechanised autoclaved flyash lime bricks conforming to is: 12894 :2002 of class designation 100 in superstructure above plinth level upto floor v level in. c.m.1:4 "supplying and fixing stone lintels/bed plates of approved quarry rough dressed in cement mortar 1:4 upto 15 cm. thick:" centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. "providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc. m20 grade nominal mix / design mix " stone kharanja: random rubble dry stone kharanja under floor "providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size)." providing & fixing ist quality standard white, gray, ivory,fume red brown, light green, light blue and other light shades glazed tiles confirming to is : 13753 and is: 15622 of size 300mm x 200mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster on walls and piller) providing and fixing 1st quality mat finished ceremic tile size 300x300mm confirming to is : 13755 and is : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). door frames : p & f t- iron frames for doors , windows and ventilators of mild steel , tee section joints mitred and welded with 15x3 mm lugs 10 cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement:3 fine sand6 graded stone aggregate 20 mm nominal size:) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinged and screws and applying a priming coat of approved steel primer providing and fixing m.s. sheet 1mm thick single leaf door shutter windows in angle iron frame 35x35x5 mm suitabilly diagonally braced with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of engg. incharge but excluding cost of chowkhats: including two coats of anit-corrosive red oxide primer paint 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3 - fine sand) internal plaster :plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished : 12mm thick external plaster : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished 20 mm thick grading roof for water proofing treatment cement concrete 1: 2: 4 (1 cement: 2 course sand: 4 greded stone aggregate 20 mm nominal size) "providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (is 1038- 1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sashputty of approved make or metal beading with screwscomplete including priming coat of approval steel primer,excluding the cost of metal beading and other fitting exceptnecessary hinges of pivots steel handles peg stay etc. asrequired partly fixed and partly openable [ fixed area not to exceed33%]" "supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance" providing and fixing square bars or other flat welded to window, ventilatiors etc.12mm dia providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer "finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm )." panting on doors & windows :- painting with syntheitic enamel paint of approved brand and manufacture in all shade to give an even shade new steel work (2 or more coat on new work). copping: cement concrete flooring 1:2:4 (1 cement: 2 course sand: 4 greded stone aggregate) finishing with a floating coat of neat cement including cement slurry, making of lines or groove etc. complete but excluding the cost of nosing of steps etc. complete : 40mm thick with 20mm thick nominal size aggregate. chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) light shade using shade cement.p providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge. (concealed work including cutting chases and making good the walls etc.,)20mm nominal outer dia pipes 25 mm nominal outer dia pipes p & f indian type white glazed vitreous china 1st quality w.c. orissa pan (is :2556 mark) with 100 mm vitreous china p or s trap including cutting and making good the wall and floor: size 530410mm "p & f wvc wash basin (1st quality, i.s. : 2556 mark) of approved make with c.i. brackets duly painted, 1 no. 15 mm c.p. pillar cock (is : 8934 mark) & 32 mm c.p. brass waste coupling of approved make,25 mm g.i. waste pipe complete including cutting & making good the wall.: 450 x 300 mm " p & f bib cock (is : 8931 mark) superior quality of approved make.c.p. brass 400 gm, 15 mm nominal bore. p & f inlet connection (angle valves) superior quality of approved make c.p. intel connection 15 mm brass (is : 8931) p&f rigid pvc pipe (is:4985 mark) class ii/ (4 kg. /cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 110 mm dia p & f low level flushing cistern of 10 litres capacity (is : 2556mark). of approved make with complete fittings c.i. brackets duly painted, brass ball cock with ball, (is: 1703 mark) complete including cutting and making good the wall:pvc with pvc bend and superior internal fittings as per is :7231 p&f rigid pvc pipe fittings (is: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: bend 87.5 110mm dia p&f rigid pvc pipe fittings (is: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant plain floor trap 110 mm dia p&f rigid pvc pipe fittings (is: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant p-trap 110 mm dia p&f rigid pvc pipe fittings (is: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant vent cowel 110 mm dia s/f rcc main hole covers with frame of approved make (light duty) size 450x450 mm p/f grating of approved quality stainiese steet sheet size 125 mm dia construction of soakage well in all types of soil of approved drawing , top 90 cm portion in 450 mm thick with cement mortar 1:6 80 mm stone slab covering jointing of slab in cm 1 : 3, ralthal, kharanja, 40 mm thick m-15 grade c.c. flooring earthwork etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr.inner dia 90 cm & 10 to 12 m deep construction of chamber in all types of soil with 300 mm thick masnory in cm. 1 : 6, 100 mm thick c.c. 1 : 5 : 10 in foundation , 20 mm thick inside plaster in cm 1 : 6, finished with floating neat cement 50 mm thick m-15 grade c.c. flooring earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr.inside size 450 x 450 mm depth upto 0.5 m & 5 kg ci cover with frame. p & f ball cock (is : 1703 mark) with rod & p.v.c. ball complete.brass wt. 300 gm, 15 mm p & f 15 mm dia connection pipe of approved quality make pvc pipes with nuts 450 mm. p & f stop cock (is:8931 mark),superior quality and of approved mark: brass 400 gm. 15 mm nominal bore p & f pvc storage tank isi marked ( is : 12701) indicating the bis license no. of approved make with cover , 25mm dia 1 m long g.i. overflow pipe & 25 cm long wash out pipe with plug & socket including making connection etc. complete of approved design 500 litres capacity wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 25 mm dia supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x 1.5 sq. mm 2 x 2.5 sq. mm providing & fixing of heavy duty capacitor start, copper woind double ball bearing 900/1400 rpm single phase exhaust fan as per pwd specification for electrical works, conforming to is:2312 isi marked in existing opening including making connections testing etc. as required. oem shall be an iso certified company. appropriate oem test certificate shall be submitted by contractor. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 300 mm sweep (900/1400 rpm)

Central Government/Public Sector

TRN :35548769 | 16 Oct, 2025

Tender Value : 0

Jalpaiguri - West Bengal

Tender for gem bids for fd store shelters size 20m x 8m light lgsf technology with 1.8 m enclosed varandah , water storage tank triple layer 1000 ltrs , fabrication from structural steel section for staging of water storage tank made of capacity 1000 ltrs , ewc european type , decorative oval shape looking mirror , chromium plated toilet paper holder with flap , brass chromium plated towel rail , chromium plated piller cock swan neck with aerator and butter fly handle , stop cock angular type chromium plated brass 15 mm weight not less then 330 gm , stop cock t type chromium plated brass 15 mm , brass chromium plated shower rose 100 mm dia with bend , bib cock long spout brass chromium plated 15 mm , pvc connection 45 cm long 15 mm , peg set of six fitted with galvanised screws , corner sheet glass shelf with two shelf assembly , soap dish ss flat back complete with screw , pvc waste pipe 32 mm and 1m long , chromium plated waste coupling 32 mm dia , cp grating 100 mm dia with hole for waste pipe , cp grating 100 mm dia without hole for waste pipe , pvc pipe 110 mm dia 3 mtr long , pvc socket 110 mm dia , pvc bend110 mm dia , s trap vitreous china , vitreous china wash hand basin white , brass cp wall mixer for mixing hot and cold water , brass cp jet water spray for ewc , plastic dustbin of capacity 10 ltrs , dwcp double wall corrugated pipes , 1000 ltrs anaerobic frp or lldpe septic tank , b and r items qty as per store list ser no 31 to 50 as per site reqmt , distribution box 8 way spn, 240 volts copper bus bar and neutral link earthing stud , mcb spn 240 volts 40 amps , mcb sp 6 to 32 amps , pvc tape 19mm wide 5 m long , cable pvc insulated electric cables heavy duty 1100 volts size 1.5 sqmm single core , cable pvc insulated electric cables heavy duty 1100 volts size 4 sqmm single core , cable pvc insulated electric cables heavy duty 1100 volts size 2.5 sqmm single core , pvc casing capping of size 1 inch medium grade , pvc casing capping of size 3 oblique 4 inch medium grade , switch piano 5 amp 230 volts flush type two way , switch piano 5 amp 230 volts flush type one way , led tube light fittings 20 w rechargeable 230v box type 4 feets with crca body pre coated white and prewired for led tuble complete , screw full thread 6 x 19 mm isi marked, 200 nos pkt , pvc switch board size 7x4 inch for sockets and switches , pvc switch board size 8 x 10 inch for main switches , pvc l bend and t junction joint for pvc casing and capping , switch socket combination multipurpose two in one 15 amp 230 volts , switch socket combination 5 amp 230 volts , service bracket 40mm dia gi tubing medium grade 1.5 mtr long with led street light 50w , service cable pvc insulated aluminium conductor 1100 volt 10 sqmm 2 core , service cable pvc insulated aluminium conductor 1100 volt 50 sqmm 3.5 core , ceiling rose three terminal , led bulk led lamp 10 watts , pvc flexible wire copper conductor multi stranded , pvc flexible conduit pipe 15 mm dia , pvc round oblique squire block , fire extinguisher of one kilogram capacity , ceiling fan 1200mm , electric geyser 5 star of capacity 25 ltr , exhaust fan 230 volts 300 mm sweep plastic body , main switch 63 amps 4 pole tpn , earthing plate 600 x 600 x 6 mm , ci earth pit cover of size 300 x 300 x 6 mm , funnel fitted with 20 mm diameter gi pipe 1.5 m long pipe , gi wire 4 mm diameter , charcoal , salt normal , air termination single pointed aluminium rod 12 mm dia and 300 mm long , testing point terminal block make of gun metal and phosphorus bronze size 75 x 75 x 25 mm drilled , aluminium strips 25 x 3.0 mm , galvanized iron strip 32 x 6 mm , funnel fitted with 20 mm diameter gi pipe 1.5 m long pipe , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings drilled , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm 3 mm thick with ms frame. , insulating pvc block 75x75x30 mm , individual standalone plastic body smoke alarm , individual standalone plastic body heat alarm , fire ball extinguisher of 1.3 kg wt with suitable provision , bed hard steel with mattress , steel bed side locker of size 1520mm x 1000mm x 450mm , study chair of size length 56 cm height 82 cm and width 56cm , study table of size 4x2 wooden top on round tube structure with three drawers unit , looking mirror of selected quality frameless of size 600 x 450 x 5 mm , water dispenser of 230 v 500 watts without refrigerator , plastic dustbin of capacity 40 ltr , stainless steel dining table with seat fitted chair for 8 person of size 2.44m x 0.9m x 0.812m , ms portable rust proof rifle rack with anti theift wiyh locking system capacity 10 rifle per row orange or green colour

Central Government/Public Sector

TRN :35533257 | 25 Oct, 2025

Tender Value : 24.75 Lacs

New Delhi - Delhi

Tender for gem bids for aluminium tower bolt , aluminium sliding bolt , aluminium handle , aluminium door stopper , anti cockroach jaali , glass shelf , brass phase , brass phase half trun , brass phase marc , brass phase jaquar , ball cock super flow , cement , c.p. waste , c.p. pillar cock , cp swan pillar cock , cp connection pipe , cp shower with arm , cp jali grating , cp wash basin mixer , cp wall mixer , cp bib cock long body , cp bib cock short body , cp wall cap for tap , china wash basin , cp angle valve , curtain brackets , commercial board , cp bottle trap , cp towel rod , cp towel ring , curtain rod , cp extension nipple , chain link fencing , cp jali for sink , cutter blade , cutter blade wood , cutter blade iron , double syphon , drapery rod , ss drawer channel , ms chhapka kunda , english wc with s trap , flush door shutter , fevicol , gi nipple , gi reducing elbow , gi elbow , gi socket , gi reducing socket , gi union , glass putty , glass runner , glass corner , ms hinges , ms hex nipple , indian wc , cp health faucet , jet spray , mortice lock with handle , ms sliding bolt , ms tower bolt , ms handle , m seal , magnetic catcher , marandi wood batten , masking tap , ms nails , old dhoti , pvc connection pipe , pvc bib cock , pvc stop cock , pvc ball cock , pvc water tank , pvc ewc seat cover , pvc bend , pvc cistern , pvc waste pipe , pvc elbow , pvc socket , pvc tee , pvc nahani trap , pvc pipe , pvc tank cover , painting brush , synthetic enamel paint , plain glass 5 mm thick , pvc cistern handle , pvc syphon washer , cp toilet paper holders , gypsum screws , ss kitchen sink , seat cover hinges , water proofing compound , ss wire mesh , wall putty , drawer knob

Central Government/Public Sector

TRN :35517850 | 20 Oct, 2025

Tender Value : 0

Kamrup - Assam

Tender for gem bids for living shelter for 120 men of light gauge frame structuresize 6481m x 946m x 30m with 15 m as per drawing andtechnical sanction attached water storage tank triplelayer 3000 ltrs confirming to is 12701 1996 make sintexultrapure aqua polywell as per drawing and technicalsanction attached ewc european type of size 580mm x440 of pvc flushing cistern of 10 ltr capacity make cerahindware jaquar all as per drawing and technical sanctionattached decorative oval shape looking mirror 55mmthick of size 450 x 600mm make saint gobain modi guarddura fit confirming to isi standard chromium platedtoilet paper holder with flap of make ess ess jaquar johnsonsuisse brass chromium plated towel rail 600 mm long 20mm dia with cloth hooks min 04 nos of make ess ess prayagjohnson suisse chromium plated piller cock swan neckwith aerator and butter fly handle weight not less then 450gm of make ess ess prayag johnson suisse stop cockangular type chromium plated brass 15 mm weight not lessthen 330 gm of make jaquar cera hindware stop cock ttype chromium plated brass 15 mm weight not less then330 gm of make jaquar cera hindwar brass chromiumplated shower rose 100 mm dia with bend bib cock longspout brass chromium plated 15 mm weight not less then330 gm of cera hindware jaquar bib cock short spoutbrass chromium plated 15 mm of make jaquar cerahindware pvc connection 45 cm long 15 mm of make ofsupreme johnson suisse famingo peg set of six fittedwith galvanised screws along the internal surface of thewalls in the rooms of make ess ess prayag johnson suisse corner sheet glass shelf with two shelf of 55mm thicksheet glass shelf with cromium plated brass bracket guardand railing make supreme neelkamal prayag soap dishss flat back complete with screw make ess ess prayag bid number gem2025b6734471 dated 30-09-2025 bid document1 93 1 1 johnson suisse., upvc pipe 32 mm dia. make, sfmc, finolex supreme., upvc pipe 20 mm dia. make, sfmc, finolex supreme., upvc socket 32 mm. make, sfmcfinolex supreme., upvc elbow 90 degree 32 mm. make, sfmc, finolex supreme., upvc elbow 20 mm. make. sfmc, finolex, supreme., upvc female thread elbow 90 degree20 mm dia. make, sfmc, finolex, supreme., upvc femalethread t 20 mm dia. make, sfmc finolex supreme., upvcplain t 32 mm make sfmc finolex supreme., upvcreducer t 32 20 32 mm dia. make. sfmc, finolex, supreme., upvc union 32 mm. make, sfmc, finolex supreme., tankconnector 32 mm. make, sfmc, finolex, supreme., pvcwall clamp 32 mm. make, sfmc, finolex, supreme., pvcwall clamp 20 mm dia. make, sfmc, finolex, supreme., float valve 20 mm. make, sfmc, finolex supreme., gatevalve 32 mm. make. sfmc, finolex, supreme., m seal 150gm pkt. make. pidilite, fevicol, m seal., taflon tape roll isimarked. make, supreme, omega, asbestos., pvc wastepipe 32 mm and 1m long. make, supreme, johnson, suissefamingo., chromium plated waste coupling 32 mm dia.make, supreme johnson suisse famingo., cp grating 100mm dia with hole for waste pipe. make ess ess, prayag, johnson, suisse., cp grating 100 mm dia without hole forwaste pipe. make. ess ess, prayag, johnson, suisse., pvcpipe 110 mm dia 3 mtr long. make, prince, finolex, supreme., pvc socket 110 mm dia. make prince, finolex, supreme., pvc bend110 mm dia. make, prince, finolex, supreme., s trap vitreous china. make, hindware, cera., vitreous china wash hand basin white of size450mmx300mm with vitreous china pedestal of suitablesize. makecera or equivalent model no 1009 hindware ., upvc reducer elbow 32mm x 20mm dia. make, sfmc, finolex, supreme., brass cp wall mixer for mixing hot andcold water screwed down for upvc pipe of dia 20mm. make.cera, hindware, parryware., brass cp jet water spray forewc. make. ess ess, prayag, johnson, suisse., urinal potvitreous china bowl urinal pot flat back model 5004confirming to is 771 part 3 sec 2. make. cera, parryware, hindware., dwcp double wall corrugated pipes of internaldiameter 150mm, 200mm, 250mm, 9000 ltrs anaerobicfrp ldpe septic tank of make sintex, ultra pure, supreme, united technocraft india or equivalent alongwithall accessories., ultra manholes with dia 800 10001200mm, and height as per the site requirement., distribution box 8 way spn, 240 volts copper bus bar andneutral link earthing stud all as per tech specificationattached., mcb spn 240 volts 63 amps. make. havells.finolex. polycab. natural white or equivalent., mcb sp 6 to32 amps havells finolex polycab natural white orequivalent, pvc tape 19mm wide 5 m long. havells finolexpolycab natural white or equivalent., cable pvc insulatedelectric cables heavy duty 1100 volts size 1.5 sqmm singlecore frls part 1 1988 as per tech specificaion attached., cable pvc insulated electric cables heavy duty 1100 volts ofsize 4 sqmm single core make havells finolex polycabnatural white or equivalent all as per technical specification., cable pvc insulated electric cables heavy duty 1100 voltsof size 2.5 sqmm copper make havells, finolex, polycab, asper techincal specification., pvc casing capping of size 1inch medium grade snow white. make havells, finolex, polycab, natural white or equivalent., pvc casing cappingof size 3 4 inch medium grade snow white. make havells, finolex, polycab, natural white or equivalent., switch piano5 amp 230 volts flush type two way snow white. make //bid details2 / 93 havells, finolex, polycab, natural white or equivalent., switch piano 5 amp 230 volts flush type one way snowwhite. make, havells, finolex, polycab, natural white orequivalent., led tube light fittings 18 20 w rechargeable230v box type 4 feets with of make havells, bajaj, philips, crompton., screw full thread 6 x 19 mm isimarked, 200 nos pkt., pvc switch board snow white size 7inch x4 inch for sockets and switches. make, havells, finolex, polycab, natural white or equivalent., pvc switchboard snow white size 8 inch x 10 inch for main switchesdb. make havells, finolex, polycab, natural white orequivalent., pvc l bend and t junction joint for pvc casingand capping confirming to is 3419 part 3 make havellsfinolex polycab natural white or equivalent., switch socketcombination snow white multipurpose 2 in 1, 15 amp 230volts with pvc switch board make, havells, finolex, polycab, natural white or equivalent., switch socket combinationsnow white 5 amp 230 volts with pvc switch board. makeanchor, ssk, finolex or equivalent., service cable pvcinsulated aluminium conductor, as per technicalspecification attached., ceiling rose three terminal snowwhite. make, anchor, ssk, cona equivalent., led bulkhead fitting as per technical specification attached., pvcflexible wire copper conductor multi stranded 0.0016 76.make, havells, finolex, polycab, natural white or equivalent., pvc flexible conduit pipe 15 mm dia make, havells, finolex, polycab, natural white or equivalent., pvc roundsquare block of make, havells, finolex, polycab, naturalwhite or equivalent., fire extinguisher of two kilogramcapacity, dry power type conforming to is 13849 along withits accessories of make cease fire omex alfa fire., ceilingfan 1400mm sweep with regulator and incl clamps, hooks, holdfast and complete fittings. make, usha, khaitan, bajaj., exhaust fan 230 volts 300 mm sweep plastic body alongwithlouvers and complete fittings. make bajaj, havells, crompton., main switch 63 amps, 4 pole tpn confirming tois 13947 part 3 2607 make havells, standard, l and t., gibracket 40mm dia light grade with led street light 50w ofmake bajaj, havells, crompton., electric geyser 5 star ofcapacity 25 ltr with pvc pipe-02nos and 15amp pin top.make, v guard, racold, bajaj, crompton., led blub10w. make bajaj crompton havells philips., angle holder.make, anchor, ssk, finolex., earthing plate 600 x 600 x 6mm galvanised steel suitable for gi strip fittings, drilled with2 nos holes for 6 mm dia near one side., ci earth pit coverof size 300 x 300 x 6 mm with angle iron of size 20x20mm, 3 mm thick with ms frame., funnel fitted with 20 mmdiameter gi pipe 1.5 m long pipe make, jindal, tata, kalinga, equivalent., gi wire 4 mm diameter for earthing., charcoal., salt normal., air termination single pointedaluminium rod 12 mm dia and 300 mm long., testing pointterminal block make of gun metal and phosphorus bronzesize 75 x 75 x 25 mm drilled and screwed including 3 nos 8mm dia 25 mm long hexagonal head screw., aluminiumstrips 25 x 3.0 mm., galvanized iron strip 32 x 6 mm., funnel fitted with 20 mm diameter gi pipe 1.5 m long. pipemake, jindal, tata, kalinga, equivalent., insulating pvcblock 75x75x30 mm with insulating clamp nut and boltmake, presto, polycab, finolex, equivalent., individualstandalone plastic body smoke alarm with provision forfixing on wall ceiling all as specified in tech specificationand drawing of make fire end afo safe guard., individualstandalone plastic body heat alarm with provision for fixingon wall ceiling as specified in tech specification and drawing //bid details3 / 93 of make fire end afo safe guard., fire ball extinguisher of1.3 kg wt with suitable provision for wall mounting andcapable of self activating on contact with flames completeall as specified in tech specification and drawing., bed hardsteel with mattress of make sleepwell kurlon comfortcomplete all as specified in tech specification and drawing., steel bed side locker of size 1520mm x 1000mm x 450mm, complete all as specified in tech specification., study chairof size length 56 cm, height 82 cm and width 56cm, typeof lacquered finish with arm, seat and back cushion of makesupreme or equivalent as per photograph of sampleattached., study table of size 4x2 wooden top on roundtube structure with three drawers unit as per technicalspecification and drawings., looking mirror of selectedquality frameless of size 600 x 450 x 5 mm of make prayagsaint gobain modiguard equivalent as per technicalspecification and drawings., water dispenser of 230 v 500watts without refrigerator with normal cold and heatingcapacity of 5 lts hour of make voltas lg usha equivalentand all as per technical specification and drawing., plasticdustbin of capacity 40 ltr make of make neelkamal cellosuprele or equivalent.

Central Government/Public Sector

TRN :35499576 | 10 Oct, 2025

Tender Value : 2.80 Crore

Baramulla - Jammu And Kashmir

Tender for gem bids for ug, supply and construction of ug ops room excavation inover area getting out in hard dense soil n exc 1 50 m deep ditto but exc 150m but n exc 3 0 m ms steel formwork tosides of concrete ms steel formwork finished formwork tofaces of walls ms steel formwork finished formwork tosides and soffits of floor or roof beams ms steel formworkfinished formwork to soffits of suspended slabs ms steelformwork finished formwork to staircases with sloping orstepped soffits including risers and stringers excludinglanding surface excavation n exc not exceeding 30 cmdeep and averaging 15cm deep and getting out in harddense soil returning filling in including spreading levellingwatering and well ramming in layers not exc 25 cm removing excavated material exc 250m n exc 500m anddepositing where directed at a level n exc 1 5 m above thestarting point water proofing compound providing andapplying smartcare dampproof a fibre reinforcedelastomeric liquid water proofing membrane applyingevenly a tack coat of in dustrial bitumen 85 25 at the rate of1 2 kg per sq m including cleaning surfaces app basedpolymeric membrane minimum weighing 3kg sqm andminimum 3mm thick reinforced with polyster m and l for40mm thick brick tiles bedded laid on 15mm thick cementmortar 1 6 and joints grouted flush in cement mortar 1 3 treating the bottom and sides of excavation at the rate of 5litres of emulsion per square metre of surface area treating the backfill in contact with foundation at the rate of7 5 litres of emulsion per square metre of vertical surface treating the top surface of filled earth at the rate of 5 litresof emulsion per square metre of surface m and l treatingthe soil under plinth protection at the rate of 5 litres ofemulsion per square metre of surface area applying two ormore coats of 100 premium acrylic emulsion paint having bid number gem2025b6741448 dated 29-09-2025 bid document1 112 voc less than 50 gm litre mirror polish granite of any typework 25mm thick table rubbed and polished in steps jambspillars window cills cooking platforms and like in cementmortar 1 4 i rounding to edges of stone slabs one edgesuch as in steps cooking platform and other similarsituations m and l vitrified ceramic tiles dark shadedoublecharged ultracharged 10 mm thick squarerectangular polished area of each tiles exceeding 0 42 sqm m and l for non skid joint free ceramic tiles 7 to 8 mm thickarea of each tile exceeding 0 18 sqm but not exceeding 038 sqm in floors etc m and l for coloured joint free glazedceramic tiles in vertical surface 350x 250 x 7mm 450x350x 7mm thick set and jointed in neat cement slurry andpointed in white or colour cement to match providing andapplying plaster of paris putty of 1 mm thickness overplastered surface to prepare the surface even and smoothincl distempering with 1st quality acrylic distemper rccseptic tank designed to carry sewage and sullage waterexcavation in any type of soil pcc 1 4 8 below foundationrcc m 30 design mix in walls base slab baffle walls androof rcc np3 200 mm diameter pipes laid on 150 mmthick bed with excavation m and l for providing and fixingfactory made upvc white colour casement openable doormade of extruded profile wilh wall thickness of 2 3mm 02mm 4 80mm thick froasted glass for fixing in door supplyonly m and l for cortex tile made up of wood fiber cementcomposite 1mm width wood fiber 25mm thick covered withacoustically transparent m and l providing and fixing10mm thick plaster of paris ceiling gypsum anhydrous tocurved surface incl any sunk or raised fe 410w gde e 250quality b framed work as in doors orgates of angle or othersectionwith gusset plates rails braces etc fe 410w gde e250 quality b rolled sections as in framing for claddingglazing and the like fixed with angle cleats flats andconnecting plates etc two coat of synthetic enamel paintover a coat of red oxide surfaces of any description over10cm in width or girth not otherwise described tubesmedium grade galvanised with all fitting and fixed completeto walls and ceilings or laid in floors of 25 mm dia tubesmedium grade galvanised with all fitting and fixed completeto walls and ceilings or laid in floors of 20 mm dia tubesmedium grade galvanised with all fitting and fixed completeto walls and ceilings or laid in floors of 15 mm dia rotational moulded polyethylene water storage tanks 1000ltr capacity m and l for gun metal globe or gate valveswith iron wheel head screwed both ends for iron pipe andfixed for 25 mm bore rimless blind installation wall hungwc with uf soft close slim seat cover hinges accessoriesset size 380x520x375 mm with single piece slim concealedcistern with floor mounting frame hand shower healthfaucet abs body with 8mm dia 1 meter long spirochromeflex tube and wall hook complete fixed at site fullyfunctional incl all necessary fitting and fixtures other thanmentioned table top basin of size 565x425x140 mm inclsingle lever basin mixer without popup waste system with450mm long braided hoses conealed body for singlelever diverter 40mm cartridge with button assemblybutton on top but without exposed parts single leverexposed parts kit of diverter consisting single lever wallmixer 3 in 1 system with provision for both hand showerand overhead shower complete with 115mm long bendpipe connecting legs and wall flange overhead shower140mm round shape single flow with air effect abs bodyand face plate chrome plated with rubit cleaning system bid details2 112 0 0 hand shower 140mm round shape single flow with aireffect abs body and face plate chrome plated with rubitcleaning system make jaquar cat hsh 1727, tumblerholder complete fixed at site fully functional incl allnecessary fitting and fixtures other than mentioned makejaquar cat can 1141n, towel rack 600mm long withoutlower hangers but with 3 hooks stainless steel, toilet rollholder make jaquar cat can 1151n, corner glass shelfwith bracket make jaquar cat can 1173, swivel mirrorcomplete fixed at site fully functional incl all necessaryfitting and fixtures other than mentioned make jaquar catcan 1195n, corner shower basket make jaquar cat can1175n, towel ring square make jaquar cat akp 35721p, soap dish holder make jaquar cat akp 35731p, wastecoupling 32mm size half thread with 80mm height inclwaste pipe complete fixed at site fully functional incl allnecessary fitting and fixtures other than mentioned, 600mm long braided hose with m10x1 nipple15mm nut oring and rubber washer make jaquar cat ald 801b, angular stop cock with wall flange make jaquar cat flp5053pm, 2 way bib cock with wall flange make jaquarcat flp 5041pm, versa horizontal manual geysercomplete fixed at site fully functional incl all necessaryfitting and fixtures other than mentioned make jaquar catvrm wht hd070, walk in panel framed in standarddimension glass 10mm finish black h 2000 w 1200, tubeslight grad galvanised as in sleeves, sand cast cast iron soil100 mm bore waste and vent pipes in any length with orwithout ears with cement joints laid in trenches or in floors, 100mm cast iron sanitary connection bend 92 5 with arms380 to 450mm excluding joint, 100 mm bore cast iron floortrap with grating including jointing to waste pipe fixed incement concrete type b 1 1 2 4, wrought second class hardwood in scantlings timber framed and fixed, 1 5mm thickdecorative laminate type 1 of surface finish colour andpattern as approved fixed with approved adhesive as permanufacturers, glass 5 5 mm thick supplied only, 2ndclass hard wood wrought bullnosed splayed chamfered orrounded on one edge or face secured with nails or bradsarea exc 6 but n exc 13 sqcm, 2nd class hardwood cleansawn battens at 35 cm centres area of each batten exc 15and nexc 25 sqcm, 6mm thick 5 ply veneered decorativeplywood grade 1 with bwr resin with decorative faceveneerson one faces fixed with nails to timberframe work, vista wooden flooring vintage style 12 mm thick woodenfloors ac5 rating or equivalent colour, vista woodenflooring vintage style 12 mm thick wooden floors ac5 ratingor equivalent colour and pattern as aproved, cement opc43 grade packed in hdpe bag each 50 kg wt, quick settingcompound make acclerex rapidite, natural m sand freefrom moisture and organic matter confirming to is 383 1970and is 2386 part vi, agg 20mm the size and grading ofaggregate shall be as specified in is 456 200 rev, agg40mm the size and grading of aggregate shall be asspecified in is 456 200 rev, agg 63mm the size andgrading of aggregate shall be as specified in is 456 200 rev, tmt bar 10mm, tmt bar 12mm, tmt bar 16mm, tmtbar 20mm, tmt bar 25mm, tmt bar 28mm, tmt bar32mm, brickwork with subclass b bricks straight or curvedon plan exc 6m mean radius built in cm 1 4, supply andlaying jointing and testing xlpe insulated pvc sheathedarmoured heavy duty electric cable with strandedaluminium conductor 1100 volts grade, excavation intrenches in soft loose soil n exc 1 5 mtr wide and not exc 1 5 //bid details3 / 112 m deep and getting out including forming bottom surface forlaying of pipes complete all as specified and directed, returning filling in including spreading leveling wateringand well ramming in layers not exc 25 mm thick completeall as specified and directed, removal of excavatedmaterial to a distance not exc 50 meter and depositingwhere directed at a level not exc 1 5 m above the startingpoint complete all as specified and directed, supplyinglaying sand cushioning for cable protection in trenches 8 cmdeep before laying cable and 15 cm deep over the cableincluding well punning complete all as specified anddierected, supplying laying sub class b bricks old size withaxis of the bricks perpendicular to the axis of the cable as incable protection complete all as specified and directed, supply and fixing in replacement gi tubing light grade intrenches fixed to wall ceiling including required gi fitting ofsize 40mm dia complete all as specified and directed, onelight point controlled by one switch, one fan exhaust pointcontrolled by one switch, one three pin switch socket 5amps outlet on independent board, one bell buzzer pointcontrolled by one switch, one power point with insulatedstranded copper conductor cable 4 sqmm single core andpvc insulated frls 1100 volts unsheathed copperconductor 4 sqmm stranded, s and f modular type switch 6amps one way one module complete all as specified makecrabtree anchor legrand, s and f modular type socketoutlet 6 amps 2 3 pin combined 2 module complete all asspecified make crabtree anchor legrand, s and f modulartype socket outlet 6 16 amps combined 2 module completeall as specified, s and f electric bell ding dong ac 230voltssingle pole complete all as specified and directed, s and fmodular bell push 6 amps modular type complete all asspecified, supply and fix modular fan step regulator120watt 2 module, material and labour for white cover withframe suitable for accommodating 01 nos module switchsocket etc, material and labour for white cover with framesuitable for accommodating 02 nos module switch socketetc, material and labour for white cover with frame suitablefor accommodating 03 nos module switch socket etc, material and labour for white cover with frame suitable foraccommodating 4 nos module switch socket etc, materialand labour for white cover with frame suitable foraccommodating 6 nos module switch socket etc, materialand labour for white cover with frame suitable foraccommodating 8 nos module switch socket etc, supplyand fixing pvc body fresh air fan with pvc blades isi marked225 mm sweep with louvers and connecting up includingprovision of three core flexible copper wire of size 1 5 sqmm, m and l submain wiring with two run single core 6 sqmmfrls copper conductor cable pvc insulated unsheathed1100 volts grade in and including pvc conduit, s and f insub main wiring with two runs of 4 sqmm single core pvcinsulated frls cable 1100 volts, s and f factory madeepoxy powder coated distribution board mccb db tpn 4way vertical type ip 43 protection made out of min 1 6 mmthick, m and l for earthing complete with galvanised steel, supply and fix indoor metal black led ceiling lightsfixturesslim edge lit 50w full spectrum square ceilinglamps 6500k cool white, supply and fix indoor ceilingmounted aluminium led profile light ip33 18w wattagewarm white ip 33 ceiling mountedand environmentalprotection, supply and fix led batten luminaire surfacemounted 2 feet system wattage of not less than 10 wattsand not less than 1000 lm, supply and fix track light focus //bid details4 / 112 light bed side decorative type complete all as specified, supply and fix smd led panel recess surface 15 watt roundsquare type led ceiling light with extruded aluminiumhousing and milky diffuser including connecting up with twincore, supply and fix mccb 160 amps fp 415 volts 36 50 hzwith thermal, supply and fix mcb dp 32 40 amps 240 volts10 ka 50 hz b curve, supply and fix mcb sp 5 32 amps240 volts 10 ka 50 hz b curve, supply and fix 3 layer pp rp o l y p r o p y l e n e random copolymer concealed pipessdr 7 4 pn16 uv, excavation in trenches in soft loose soilnexc 1 5 mtr wide and not exc 1 5 m deep and getting outincluding forming bottom surface for laying of pipescomplete all as specified and directed, making connectionof ppr distribution branch with ppr main of sizes 16 mm to40 mm by providing and fixing tee including cutting andmaking fusion joint etc complete all as specified anddirected, supply and fix pp r gate valves brass insert isimarked of external dia 25 mm, supply and fix rnautomatic water pressure pump suitable for hot watercirculation washing machine ro and shower 15mm 1 by 2feet, supply and fix 2 hp single phase motor volt 220 50hz complete all as specified and as directed, supply and fixair cooled and hot system split unit air conditioner ofcapacity 1 tonne single phase 230 volt 50 hz ac indoor andoutdoor unit, supply and fix air cooled and hot system splitunit air conditioner of capacity 1 5 tonne single phase 230volt, supply and fix air cooled air conditioner electric drivensingle phase of capacity of 40 to 5 0tr complete all asspecified, supply and fix voltage stabilizer for automaticoperation single phase naturally air cooled indoor type anddesigned for input variation between 170 volt, s and fsingle pole and neutral sheet metal enclosure with a two pinand earth plug and socket complete with one single polemcb 25 a, sub main wiring with approved colour coding asper is with single core frls pvc insulated flexiblemultistranded copper conductor 1 1 kv grade, supply andfixing of gi duct 24 guage of size 8 inch x 8 inch h x winches 04 ducts complete all as speccified and as directed, sipply and fixing of exhaust inline fan 750 cfm fresh aircomplete all as speccified and as directed, sipply and fixingof exhaust fan 400 mm 15 inch complete all as speccifiedand as directed, sipply and fixing of canvas connectioncomplete all as speccified and as directed, sipply and fixingof diffusers 12 inch x 12 inch complete all as speccified andas directed, three phase 1 2 hp monoblock pump 430 voltcomplete with and incl 3 mtr length required size flexiblesuction pipepipe, provn of 58 5 kva diesel generating setcomplete with diesel engine alternator and amf controlpanel conforming to the specification given, xlpe cablexlpe insulated pvc sheathed heavy duty armoured multicore cable 25 sqmm 3 5 core aluminium conductor forworking voltage upto and including 1100 volts conformingto is 7098, on off changeover switch change over switchesin sheet metal enclosure 63 amp, fuel filter ctg duplextype, spin on lube oil filter, fuel filter element, main element for air cleaner, v belt cogged avx 101136, lube oil, earthing electrode prefabricated gelearthing electrode of pipe in pipe technology, gi pipe 100mm dia med grade as per is specification 1239 part i 1990isi marked length 2 mtr, back filled compound, ms earthpit cover of size 30 cm x 30 cm with handle, aluminiumstrip of size 25mm x 3mm 9 00m long, iron spikes 16 inchlong complete as directed and specified by buyer, gi stripof size 32 x 6mm 3 00m long, gi nipple 20mm dia and //bid details5 / 112 cm long is 1879, gi reducer socket 40x20mm isi marked, lightning air terminal a copper tube 150 cm long x 25 mmdia with five copper prongs of length 15cm each fixed tocopper ball, ms clamp 40x2mm with nut and bolt complete, gi wire 12 gauge conforming to is 2062 1991, earth augur, pvc pipe 3m long 6 inch dia, cement opc 43 gradepacked in hdpe bag each 50 kg, tester set meger forcarrying out serviceability check along with manual one perfive lc, gi pipe medium grade of 40mm dia 6 mtr long andone equal socket of 40mm dia welded with ms plate of size100mm x 100mm x 4mm thick with 04 nos hole of 12mmdia, natural sand, aggregate 20mm stone aggregate to becrushed rock or gravel 20mm, gi pipe 40 mm bore 2m longas per is 1239, 50 mm bore gi pipes sleeve, crystalinecondcutive mixture ccm, supply of control desk forprovision of 06 monitors and 06 operators made in xlat xesystem, supply of control desk for provision of 04 monitorsand 04 operators made in xlat xe system, supply ofcontrol desk made in xlat xe system, supply of managertable, supply of printer table, supply of 2 seater sofa, supply of corner table, supply of center table, supply ofchair

Central Government/Public Sector

TRN :35482667 | 17 Oct, 2025

Tender Value : 0

Kamrup - Assam

Tender for gem bids for living, living shelter for 72 jcos of lgsf structure size 59m x986m with 15 m enclosed varandah both side detailedtech specification and drawing attached water storagetank triple layer 3000 ltrs confirming to is 12701 1996make sintex ultrapure aqua polywell fabrication fromstructural steel section for staging of water storage tank ofcapacity 2000 ltrs all as per technical specification attachedmake of angle iron tata sail jsw ewc european type ofsize 580mm x440 model 2008 ewc and combi flush pvcflushing cistern of 10 ltr capacity make cera or equivalentin hindware parryware decorative oval shape lookingmirror 55mm thick of size 450 x 600mm make saint gobainmodi cuard dura fit confirming to isi standard chromiumplated toilet paper holder with flap make ess ess jaquarjohnson suisse brass chromium plated towel rail 600mm long 20 mm dia with cloth hooks min 04 nos make essess prayag johnson suisse chromium plated piller cockswan neck with aerator and butter fly handle weight not lessthen 450 gm make ess ess prayag johnson suisse stopcock angular type chromium plated brass 15 mm weightnot less then 330 gm make ess ess prayag johnson suisse stop cock t type chromium plated brass 15 mm weight notless then 330 gm make ess ess prayag johnson suisse brass chromium plated shower rose 100 mm dia with bendmake ess ess prayag johnson suisse bib cock long spoutbrass chromium plated 15 mm weight not less then 330 gmmake ess ess prayag johnson suisse pvc connection 45cm long 15 mm make supreme johnson suisse famingo peg set of six fitted with galvanised screws along theinternal surface of the walls in the rooms make ess essprayag johnson suisse corner sheet glass shelf with twoshelf of 55mm thick sheet glass shelf with cromium platedbrass bracket guard and railing make supreme neelkamal bid number gem2025b6729593 dated 26-09-2025 bid document1 77 1 1 prayag., soap dish ss, flat back complete with screw makeess ess prayag johnson suisse., pvc waste pipe 32 mm and1m long make supreme johnson suisse famingo., chromium plated waste coupling 32 mm dia make supremejohnson suisse famingo ., cp grating 100 mm dia with holefor waste pipe make ess ess prayag johnson suisse., cpgrating 100 mm dia without hole for waste pipe make essess prayag johnson suisse., pvc pipe 110 mm dia 3 mtrlong make prince finolex supreme., pvc socket 110 mmdia make prince finolex supreme., pvc bend110 mm diamake prince finolex supreme., s trap vitreous china makehindware parryware cera., vitreous china wash hand basinwhite of size 450mmx300mm with vitreous china pedestal ofsuitable size . make cera or equivalent model no 1009hindware parryware., brass cp wall mixer for mixing hotand cold water screwed down for upvc pipe of dia 20mmmake cera hindware parryware., brass cp jet water sprayfor ewc. make ess ess prayag johnson suisse., plasticdustbin of capacity 10 ltrs., dwcp double wall corrugatedpipes of internal diameter 150mm, 200mm, 250mm., 3000ltrs anaerobic frp lldpe septic tank of make sintex ultrapure supreme united technocraft india or equivalentalongwith all accessories., distribution box 8 way spn, 240volts copper bus bar and neutral link earthing stud of makehavells legrand l and t equivalent all as per technicalspecificaion attached., mcb spn 240 volts 32 amps havellsfinolex polycab natural white or equivalent., mcb sp 6 to32 amps havells finolex polycab natural white orequivalent., pvc tape 19mm wide 5 m long havells finolexpolycab natural white or equivalent., cable pvc insulatedelectric cables heavy duty 1100 volts of size 1.5 sqmm asper tech specifiaion attached., cable pvc insulated electriccables heavy duty 1100 volts as per technical specificationattached., cable pvc insulated electric cables heavy duty1100 volts all as per technical specification attached., pvccasing capping of size 1 inch medium grade snow whitehavells finolex polycab natural white or equivalent., pvccasing capping of size 3 4 inch medium grade snow white.make havells finolex polycab natural white or equivalent., switch piano 5 amp 230 volts flush type two way snowwhite havells finolex polycab natural white or equivalent, switch piano 5 amp 230 volts flush type one way snowwhite havells finolex polycab natural white or equivalent, led tube light fittings 20 w rechargeable 230v box type 4feets complete all as per tech specification attached. makehavells bajaj philips crompton equivalent., screw fullthread 6 x 19 mm isi marked, 200 nos pkt., pvc switchboard snow white size 7 inch x 4 inch for sockets andswitches havells finolex polycab natural white orequivalent., pvc switch board snow white size 8 inch x 10inch for main switches db havells finolex polycab naturalwhite or equivalent., pvc l bend and t junction joint forpvc casing and capping confirming to is 3419 part 3 havellsfinolex polycab natural white or equivalent., switch socketcombination snow white multipurpose 2 in 1, 15 amp 230volts havells finolex polycab natural white or equivalent., switch socket combination snow white 5 amp 230 voltsmake anchor ssk finolex., service cable pvc insulatedaluminium conductor, 1100 volt grade heavy duty sqmm3.5 core havells finolex polycab all as per tech specificationattached., ceiling rose three terminal snow white makeanchor ssk finolex havells equivalent., led bulk head ledlamp 10 watts make havells bajaj philips cromptonequivalent all as per tech specifcation attached., pvc //bid details2 / 77 flexible wire copper conductor multi stranded 0.0016 76havells finolex polycab natural white or equivalent all asper technical specification attached., pvc flexible conduitpipe 15 mm dia havells finolex polycab natural white orequivalent., pvc round squire block havells finolexpolycab natural white or equivalent., fire extinguisher oftwo kilogram capacity, dry power type conforming to is13849 along with its accessories make cease fire omex alfafire., ceiling fan 1400mm sweep with regulator and inclclamps, hooks, holdfast and complete fittings make ushakhaitan bajaj., exhaust fan 230 volts 200 mm sweep plasticbody alongwith louvers and complete fittings make bajajhavells crompton ., gi bracket 40mm dia light grade withled street light 50w make bajaj havells crompton ., electricgeyser 5 star of capacity 25 ltr with pvc pipe 02nos and15amp pin top make v guard racold bajaj crompton., main switch 63 amps, 4 pole tpn confirming to is 13947part 3 2607 make havells standard l and t., led blub 10wmake bajaj crompton havells philips., earthing plate 600 x600 x 6 mm galvanised steel suitable for gi strip fittings, drilled with 2 nos holes for 6 mm dia near one side., ciearth pit cover of size 300 x 300 x 6 mm with angle iron ofsize 20x20mm, 3 mm thick with ms frame., funnel fittedwith 20 mm diameter gi pipe 1.5 m long. pipe make jindaltata kalinga equivalent., gi wire 4 mm diameter forearthing ., charcoal, salt normal, air termination singlepointed aluminium rod 12 mm dia and 300 mm long., testing point terminal block make of gun metal andphosphorus bronze size 75 x 75 x 25 mm drilled andscrewed including 3 nos 8 mm dia 25 mm long hexagonalhead screw., aluminium strips 25 x 3.0 mm., galvanizediron strip 32 x 6 mm., charcoal., salt normal., insulatingpvc block 75x75x30 mm with insulating clamp nut and boltmake presto polycab finolex equivalent., individualstandalone plastic body smoke alarm with adequateprovision for fixing on wall ceiling roof all as per techspefication attached. make. fire end afo safe guard., individual standalone plastic body heat alarm with adequateprovision for fixing on wall ceiling roof all as per techspecification attached. make fire end afo safe guard., fireball extinguisher of 1.3 kg wt with suitable provision for wallmounting as per tech spefication attached make afo kanexfire stop elide fire end safe guard., bed hard steel withmattress of size 1.9 mtr x 0.9 mtr x 75 mm thick makesleepwell kurlon all as per tech specification attached., steel bed side locker of size 1520mm x 1000mm x 450mm, comlete all as specified in tech specification., study chair ofsize length 56 cm, height 82 cm and width 56cm makesupreme or equivalent as per photograph of sampleattached., study table of size 4x2 wooden top on roundtube structure with three drawers unit as per photograph ofsample attached., looking mirror of selected qualityframeless of size 600 x 450 x 5 mm make prayag saintgobain modiguard equivalent., water dispenser of 230 v500 watts without refrigerator with normal cold and heatingcapacity of 5 lts hour of make voltas lg usha all as pertech specification attached., plastic dustbin of capacity 40ltr make neelkamal cello suprele equivalent.

Central Government/Public Sector

TRN :35464363 | 15 Oct, 2025

Tender Value : 0

Kamrup - Assam

Tender for gem bids for superstructure g 1 extended chdh of light gauge steel frame structure size 30m x 9.10m with 1.5 m enclosed varandah both side all as specified in ts and drawings. , water storage tank triple layer 3000 ltrs confirming to is 12701 to 1996 of make sintex, supreme, plasto, ultrapure aqua and polywell all as per specified in technical specification and drawings. , ewc european type of size 580mm x 440 model 2008 combi flush pvc flushing cistern of 10 ltr. , fabrication from structural steel section for staging of water storage tank all as per technical specification and drawings. , decorative oval shape looking mirror 5.5mm thick of size 450 x 600mm make saint gobain modi cuard dura fit confirming to isi standard. , chromium plated piller cock swan neck with aerator and butter fly handle weight not less then 450 gm make ess ess, prayag, johnson suisse. , stop cock angular type chromium plated brass 15 mm weight not less then 330 gm make ess ess prayag johnson suisse , bib cock long spout brass chromium plated 15 mm weight not less then 330 gm make ess ess, prayag, johnson suisse. , pvc connection 45 cm long 15 mm make-supreme johnson suisse famingo. , peg set of six fitted with galvanised screws along the internal surface of the walls in the rooms. make-ess ess, prayag, johnson suisse. , cp grating 100 mm dia with hole for waste pipe make ess ess prayag johnson suisse , cp grating 100 mm dia without hole for waste pipe make ess ess prayag johnson suisse. , pvc pipe 110 mm dia 3 mtr long make - prince finolex supreme. , pvc socket 110 mm dia. make - prince finolex supreme. , pvc bend110 mm dia. make - prince finolex supreme. , tank connector 32 mm. makesfmc,finolex,supreme. , float valve 20 mm. make- sfmc finolex supreme. , gate valve 32 mm. make sfmc finolex supreme. , pvc waste pipe 32 mm and 1m long make supreme johnson suisse famingo. , chromium plated waste coupling 32 mm dia. make-supreme johnson suisse famingo. , anti skid vintilised tiles of size 600 mm x 600 mm for floor thickness between 9 to 10 mm thick. , non skid ceramic tiles of size 600mmx600mm on the floor of thickness of 6-8 mm. make johnson kajaria orient somany as per technical specification and drawings. , material and labour glazed ceramic complete all as specified in technical sanction and drawings attached. , curtain arrangement drapery and rod made of 25 mm dia and 1600 mm long as per technical specification attached. , white cement confirming to is 8042 1989 make acc birla white ambuja. , distribution box 8 way spn, 240 volts copper bus bar and neutral link earthing stud conforming to is 13032 and is 8623 double door type. make havells legrand l and t equivalent , mcb spn 240 volts 32 amps havells finolex polycab natural white or equivalent. , mcb sp 6 to 32 amps havells finolex polycab natural white or equivalent. , pvc tape 19mm wide 5 m long. havells finolex polycab natural white or equivalent. , cable pvc insulated electric cables heavy duty 1100 volts grade multi stranded copper conductor of size 1.5 sqmm single core frls confirming to is 1554 part 1 1988. , cable pvc insulated electric cables heavy duty 1100 volts grade multi stranded copper conductor of size 4 sqmm single core frls confirming to is 1554 part 1 1988. , cable pvc insulated electric cables heavy duty 1100 volts as per technical specification attached. , pvc casing capping of size 1 inch medium grade snow white. make havells finolex polycab natural white or equivalent. , pvc casing capping of size 3 4 inch medium grade snow white make havells finolex polycab natural white or equivalent. , switch piano 5 amp 230 volts flush type two way snow white havells finolex polycab natural white or equivalent. , led tube light fittings 20 w rechargeable 230v box type 4 feets with crca body pre coated white and prewired for led tuble complete. , screw full thread 6 x 19 mm isi marked 200 nos pkt. , pvc switch board snow white size 7 inch x 4 inch for sockets and switches. make havells finolex polycab natural white or equivalent. , pvc switch board snow white size 8 inch x 10 inch for main switches db make havells finolex polycab natural white or equivalent. , pvc l bend and t junction joint for pvc casing and capping confirming to is 3419 part 3 havells finolex polycab natural white or equivalent , switch socket combination snow white multipurpose 2 in 1, 15 amp 230 volts make havells finolex polycab natural white or equivalent. , switch socket combination snow white 5 amp 230 volts. make anchor ssk cona. , service cable pvc insulated aluminium conductor as per technical sanction attached. , ceiling rose three terminal snow white. make, anchor ssk cona equivalent. , led bulk head fitting high pressure die cast aluminum front cover with glass cover with specially design gasket with led lamp 10 watts. , pvc flexible wire copper conductor multi stranded 0.0016 76 havells finolex polycab natural white or equivalent , pvc flexible conduit pipe 15 mm dia havells finolex polycab natural white or equivalent , pvc round squire block havells finolex polycab natural white or equivalent , fire extinguisher of two kilogram capacity, dry power type conforming to is 13849 along with its accessories. make cease fire omex alfa fire equivalent , ceiling fan 1400mm sweep with regulator and incl clamps, hooks, holdfast and complete fittings make usha khaitan bajaj , exhaust fan 230 volts 450mm sweep plastic body alongwith louvers and complete fittings make bajaj havells crompton . , exhaust fan 230 volts 200mm sweep plastic body alongwith louvers and complete fittings make bajaj havells crompton . , gi bracket 40mm dia light grade with led street light 50w make bajaj havells crompton . , electric geyser 5 star of capacity 25 ltr with pvc pipe-02nos and 15amp pin top make v guard racold bajaj crompton , main switch 32 amps, 4 pole tpn confirming to is 13947 part 3 2607 make havells standard l and t , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings, drilled with 2 nos holes for 6 mm dia near one side. , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm, 3 mm thick with ms frame. , funnel fitted with 20 mm diameter gi pipe 1.5 m long pipe . make jindal tata kalinga equivalent. , gi wire 4 mm diameter for earthing. , charcoal , salt normal , air termination single pointed aluminium rod 12 mm dia and 300 mm long. , testing point terminal block make of gun metal and phosphorus bronze size 75 x 75 x 25 mm drilled and screwed including 3 nos 8 mm dia 25 mm long hexagonal head screw. , aluminium strips 25 x 3.0 mm , galvanized iron strip 32 x 6 mm , funnel fitted with 20 mm diameter gi pipe 1.5 m long pipe. make-jindal tata kalinga equivalent. , insulating pvc block 75x75x30 mm with insulating clamp nut and bolt of make -presto polycab finolex equivalent. , individual standalone plastic body smoke alarm with adequate provision for fixing on wall ceiling roof all as per technical specification and drawings. , individual standalone plastic body heat alarm with adequate provision for fixing on wall ceiling roof. as per technical specfication attached. , fire ball extinguisher of 1.3 kg wt with suitable provision for wall mounting and capable of self activating on contact with flames. as per technical specification attached. , table food warmer stainless steel with temperature controller, ss with 3 containers of bits each. , chapati warmer electric ss, double walled glass wool insulation. as per technical specification attached. , insect fly catcher with two tubes of 2 ft 20 wts. , ro plant 300 ltr capacity. , stainless steel dining table with seat fitted chair for 8 person of size 2.44m x 0.9m x 0.812m thickness of top 1 mm on 40 mm dia verticle and under structure support. , chair with cushion. , table 900mm x 600 mm. , peg set of six fitted with galvanised secrew along the internal surface of the wall in the room. make s prayag johnsen suisse. , plastic dustbin of capacity 40 ltr. make neelkamal cello supreme

Central Government/Public Sector

TRN :35285967 | 29 Oct, 2025

Tender Value : 0

Kapurthala - Punjab

Tender for supply of set of aluminium panel for end wall for memut3ph bhel coaches.

1

Related Searched Keywords : aluminium grating

Get aluminium grating Tender Alert...

Related Searched Keywords : aluminium grating

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us

Copyright ©2018 - Thetenders.com.