Filters

List of latest chandigarh-ut Tenders in Indian Tenders. Click on any chandigarh-ut Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for chandigarh-ut Tenders.

All-Tenders (461)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :20699535 | 22 Apr, 2021

Tender Value : 0

Chandigarh Ut - Chandigarh

Tender for supply of kitchen equipment ss work table work table with under shelf size 44x24x34+6 providing by supplying, fixing and placing in position complete, work table of size 44x24x34+6 made of 16 gauge stainless steel of grade 304 duly 120 grit matt polished with all resulting edges rounded with no bur or other excess material left. top will be turned down 2” and ½ underneath in channel shape on all exposed sides, in case of sink in top wherever mentioned the side shall be raised by ¾” on all exposed sides, where tables are placed against building walls, they will be turned up at back approximately 6” returned ¾” at 45 degree to wall with all exposed ends closed, argon are welded and smooth polish. the work table and undershelve sheet shall be placed on welded ms angle frame of size 35mmx35mmx5mm shall be primed and painted which will be welded with stainless steel square pipe/dia pipe of size 40mm supports/legs of table having adjustable nylon leveling feet at bottom and two tables shall have arrangements to make it as single table and including undershelves of size 24x24x12+6 constructed of 0.8mm, stainless steel sheeting of ss grade 304 uniformly matt polished with 12 grit and reinforced with 35mm x 35mm x 5mm ms angle frame welded with supports / legs at bottom to support undershelve. all shelves will be turned down 1½ and ½ underneath on all sides in channel shape with resulting corners cutout to fit counter of leg complete in all respect and to the entire satisfaction of engineer in charge. chappati with puffer chapati plate with puffer providing and supplying dosa plate with puffer of size 48x24x34 consisting of heavy duty ms plate removable for dosa and chapati range, top area covered as approx 2/3 portion for baking or cooking the chapati both side and 1/3 portion kept for puffing as a grill area. 12 mm thick polished mild steel or stainless steel cooking plate for chapati or 16mm thick plate for dosa plate welded to 16 swg thick stainless steel trims. 18 swg thick stainless steel sheet with recessed design. v type hp burners of min. 40000 btu/ hr. capacity each with the chapati, dosa plate to ensure uniform heating throughout the plate. cast iron or mild steel puffing grid fitted on right hand side. all sides turned down 50mm and in 12mm, both sides, control valve & pilot @ psi pressure to be mounted on the front, with one under shelf welded over with frame made of ms angle 35mmx35mmx5mm duly primed and painted with top in 16 guage stainless steel of 304 grade non-magnetic with legs in 1½ dia/ square pipe of stainless steel of 304 grade non magnetic with adjustable nylon leveling feet with side coverage by 22 guage stainless sheet pc sheet in 304 grade. the complete unit has inbuilt oil drain box to collect the oil complete in all respect and to the entire satisfaction of engineer in charge. dumper table work table with under shelf size 24x24x34+6 providing by supplying, fixing and placing in position complete, work table of size 24x24x34+6 made of 16 gauge stainless steel of grade 304 duly 120 grit matt polished with all resulting edges rounded with no bur or other excess material left. top will be turned down 2” and ½ underneath in channel shape on all exposed sides, in case of sink in top wherever mentioned the side shall be raised by ¾” on all exposed sides, where tables are placed against building walls, they will be turned up at back approximately 6” returned ¾” at 45 degree to wall with all exposed ends closed, argon are welded and smooth polish. the work table and undershelve sheet shall be placed on welded ms angle frame of size 35mmx35mmx5mm shall be primed and painted which will be welded with stainless steel square pipe/dia pipe of size 40mm supports/legs of table having adjustable nylon leveling feet at bottom and two tables shall have arrangements to make it as single table and including undershelves of size 24x24x12+6 constructed of 0.8mm, stainless steel sheeting of ss grade 304 uniformly matt polished with 12 grit and reinforced with 35mm x 35mm x 5mm ms angle frame welded with supports / legs at bottom to support undershelve. all shelves will be turned down 1½ and ½ underneath on all sides in channel shape with resulting corners cutout to fit counter of leg complete in all respect and to the entire satisfaction of engineer in charge. stock pot size 30x30x20+16 providing by supplying, fixing and placing in position complete, stock pot of size 30x30x20+16 with frame made of ms angle 35mmx35mmx5mm duly primed and painted with top in 16 guage stainless steel 304 grade non-magnetic and legs of 1.5 dia/square tube of 16guage stainless steel 304 grade non magnetic with adjustable nylon leveling feet with side coverage of 22 guage plastic coated sheet in stainless steel 304 grade will be turned down 2 and ½ in channel shape to hold the heavy duty pilot burner controls and removable spill tray underneath burners of 16 guage ss 304 grade with stainless steel handles complete in all respect and to the entire satisfaction of engineer in charge. ss work table work table with under shelf size 30x30x34+16 providing by supplying, fixing and placing in position complete, work table of size 30x30x34+6 made of 16 gauge stainless steel of grade 304 duly 120 grit matt polished with all resulting edges rounded with no bur or other excess material left. top will be turned down 2” and ½ underneath in channel shape on all exposed sides, in case of sink in top wherever mentioned the side shall be raised by ¾” on all exposed sides, where tables are placed against building walls, they will be turned up at back approximately 6” returned ¾” at 45 degree to wall with all exposed ends closed, argon are welded and smooth polish. the work table and undershelve sheet shall be placed on welded ms angle frame of size 35mmx35mmx5mm shall be primed and painted which will be welded with stainless steel square pipe/dia pipe of size 40mm supports/legs of table having adjustable nylon leveling feet at bottom and two tables shall have arrangements to make it as single table and including undershelves of size 24x24x12+16 constructed of 0.8mm, stainless steel sheeting of ss grade 304 uniformly matt polished with 12 grit and reinforced with 35mm x 35mm x 5mm ms angle frame welded with supports / legs at bottom to support undershelve. all shelves will be turned down 1½ and ½ underneath on all sides in channel shape with resulting corners cutout to fit counter of leg complete in all respect and to the entire satisfaction of engineer in charge. single sink unit size 24x24x34+6+6 providing by supplying, fixing and placing in position complete, triple sink of outer size 24x24x34+6+6 constructed of 16 gauge. 304 grade quality stainless steel with side edge shall be turned down 2 and ½ in channel shape and shall have radius corners, argon arc welded, smooth ground and uniformly finished, duly fitted with 1½ dia. british standard pipe drain copling and 1½ british standard pipe valve and complete frame of sink shall be surrorted over frame of ms angle of size 35mmx35mmx5mm shall be duly primed and painted and having 1½ dia/ square pipe supports of stainless steel of 304 grade non magnetic with adjustable nylon leveling feet complete in all respect and to the entire satisfaction of engineer in charge. two burner indian range size 48x24x34+6 providing by supplying, fixing and placing in position complete, two burner indian cooking range with one under shelf of size 48x24x34+6 with frame made of ms angle 35mmx35mmx5mm duly primed and painted with top in 16 guage stainless steel 304 grade non-magnetic and legs of 1.5 dia/square tube of 16 gauge stainless steel 304 grade non magnetic with adjustable nylon leveling feet with side coverage of 22 guage pc sheet in stainless steel 304 grade will be turned down 2 and ½ in channel shape to hold the pilot burner controls and removable spill tray underneath burners of 0.8mm guage ss 304 grade with stainless steel handles complete in all respect and to the entire satisfaction of engineer in charge. work table with under shelf size 24x24x34+6 providing by supplying, fixing and placing in position complete, work table of size 24x24x34+6 made of 16 gauge stainless steel of grade 304 duly 120 grit matt polished with all resulting edges rounded with no bur or other excess material left. top will be turned down 2” and ½ underneath in channel shape on all exposed sides, in case of sink in top wherever mentioned the side shall be raised by ¾” on all exposed sides, where tables are placed against building walls, they will be turned up at back approximately 6” returned ¾” at 45 degree to wall with all exposed ends closed, argon are welded and smooth polish. the work table and undershelve sheet shall be placed on welded ms angle frame of size 35mmx35mmx5mm shall be primed and painted which will be welded with stainless steel square pipe/dia pipe of size 40mm supports/legs of table having adjustable nylon leveling feet at bottom and two tables shall have arrangements to make it as single table and including undershelves of size 24x24x12+6 constructed of 0.8mm, stainless steel sheeting of ss grade 304 uniformly matt polished with 12 grit and reinforced with 35mm x 35mm x 5mm ms angle frame welded with supports / legs at bottom to support undershelve. all shelves will be turned down 1½ and ½ underneath on all sides in channel shape with resulting corners cutout to fit counter of leg complete in all respect and to the entire satisfaction of engineer in charge. under counter refrigerator with 2 over head size 72x24x34+18+12 providing by supplying, fixing and placing in position complete, under counter refrigerator of size 72x24x34 with 2 overhead shelves and heating element on the underside of the top shelf with exterior cladding of 20 gauge ss sheet interior cladding no 22 gauge stainless steel sheet 38mm x 38mm thick. ms angle frame work, 50mm thick puff insulation four 4 38mm dia pipe legs with adjustable bullet feet four 4 nos of insulated doors const of # 20 gauge stainless steel sheet with ss handel magnetic gasket hinged at front compressor unit of kirloskar louver front of compressor unit complete with control with static cooling 1”0 waste outlet pipe at bottom with stainless steel drip tray & handel, internal temperature +0” to +4 to be maintained complete in all respect and to the entire satisfaction of engineer in charge. work table with under shelf size 44x24x34+6 providing by supplying, fixing and placing in position complete, work table of size 44x24x34+6 made of 16 gauge stainless steel of grade 304 duly 120 grit matt polished with all resulting edges rounded with no bur or other excess material left. top will be turned down 2” and ½ underneath in channel shape on all exposed sides, in case of sink in top wherever mentioned the side shall be raised by ¾” on all exposed sides, where tables are placed against building walls, they will be turned up at back approximately 6” returned ¾” at 45 degree to wall with all exposed ends closed, argon are welded and smooth polish. the work table and undershelve sheet shall be placed on welded ms angle frame of size 35mmx35mmx5mm shall be primed and painted which will be welded with stainless steel square pipe/dia pipe of size 40mm supports/legs of table having adjustable nylon leveling feet at bottom and two tables shall have arrangements to make it as single table and including undershelves of size 24x24x12+6 constructed of 0.8mm, stainless steel sheeting of ss grade 304 uniformly matt polished with 12 grit and reinforced with 35mm x 35mm x 5mm ms angle frame welded with supports / legs at bottom to support undershelve. all shelves will be turned down 1½ and ½ underneath on all sides in channel shape with resulting corners cutout to fit counter of leg complete in all respect and to the entire satisfaction of engineer in charge. four door refrigerator size 48x27x84 providing by supplying, fixing and placing in position complete, four door vertical refrigerator for storage of size 48x27x84, outer body of the freezer made of 0.8mm plastic quoted stainless steel 304 sheet and inner cabins and shelves shall be made of 22 gauge stainless steel fitted with stainless steel wire mesh jali 6mm thick crompton compressor for defreeze 0.75 hp with 15 degree c temperature will be used. insulation by puff. complete in all respect and to the entire satisfaction of engineer in charge. ss crockery rack rack size 42x18x72 providing by supplying, fixing and placing in position complete, vertical rack with five shelves of size 42x18x72 made of 0.8mm stainless steel sheeting of grade 304 welded with legs of 40mm dia/ square pipe with adjustable nylon leveling feet and having stainless steel tubular frame of size 40mmx20mm of 16 guage of 304 grade provided underneath each shelf and all shelves will be turned down 2 and ½ in channel shape underneath on all sides complete in all respect and to the entire satisfaction of engineer in charge. ss crockery rack rack size 48x18x72 providing by supplying, fixing and placing in position complete, vertical rack with five shelves of size 48x18x72 made of 0.8mm stainless steel sheeting of grade 304 welded with legs of 40mm dia/ square pipe with adjustable nylon leveling feet and having stainless steel tubular frame of size 40mmx20mm of 16 guage of 304 grade provided underneath each shelf and all shelves will be turned down 2 and ½ in channel shape underneath on all sides complete in all respect and to the entire satisfaction of engineer in charge. ss crockery rack rack size 33x18x72 providing by supplying, fixing and placing in position complete, vertical rack with five shelves of size 48x18x72 made of 0.8mm stainless steel sheeting of grade 304 welded with legs of 40mm dia/ square pipe with adjustable nylon leveling feet and having stainless steel tubular frame of size 40mmx20mm of 16 guage of 304 grade provided underneath each shelf and all shelves will be turned down 2 and ½ in channel shape underneath on all sides complete in all respect and to the entire satisfaction of engineer in charge. ss crockery rack rack size 60x18x72 providing by supplying, fixing and placing in position complete, vertical rack with five shelves of size 60x18x72 made of 0.8mm stainless steel sheeting of grade 304 welded with legs of 40mm dia/ square pipe with adjustable nylon leveling feet and having stainless steel tubular frame of size 40mmx20mm of 16 guage of 304 grade provided underneath each shelf and all shelves will be turned down 2 and ½ in channel shape underneath on all sides complete in all respect and to the entire satisfaction of engineer in charge. patato onion bins pot rack pot rack sink scrubber visi cooler providing by supplying, fixing and placing in position complete, visi cooler -700 ltr. capacity with power supply of 230v/1ph/50hz, with low emissive toughened glass having provision of internal lighting and locking of make bluestar or similar complete in all respect and to the entire satisfaction of engineer in charge. hot bain marie size 72x27x34 providing by supplying, fixing and placing in position complete, hot bain marrie with top constructed of 16 gauge stainless steel sheet gr. ss304 front turned down 2’ & in ½” rear & both sides & rear turned down 2” & flush with body cladding. top shall be secured to 1-1/2”x1/8” thick mild steel welded work, exterior/ interior cladding no 0.8mm stainless steel sheet with 2“ thick . puff insulation, top of unit shall be provided glass sliding door with handle & locking arrangement. internal temperature-20deg. to -24deg. to be matained. unit provided one no. removable &adjustable stainless steel welded wire helf on the stainless steel clip, side channel supported adjustable hight. right side of unit shall be provided 0.5 h.p. low temperature type kirloskar compressor with louvered access panels, single phase, independent control, digital thermometer & electrical cord. static cooling, bottom of internal tank shall be provided 1” dia drain outlet and removable perforated no. 0.8mm .s flase bottom & bellow no 0.8mm s.s drip tray with integral handle unit shall be mounted on 4 no.s 6” high 1-1/2”x1-1/2 s.s square pipe legs with adjustable bullet feet complete in all respects as per site and to the entire satisfaction of engineer in charge. stainless steel exhaust hood size 54x36x20 providing by supplying, fixing and placing in position complete, stainless steel exhaust hoods made of 20 guage cold rolled coil sheet with stainless steel baffle filters & grease and it top edge must be at min 2400mm height. the front edge of hood shall be 400mm deep and backside shall be 500mm min deep and it shall be 300mm extra on front and sides than cooking area. exhaust fan either gec/ crompton make 18 dia and 1400 rmp non-magnetic with oil filters covering tandoor, chapati plate, chinese and indian sections of size 120approx 10 x36x18 complete in all respect and to the entire satisfaction of engineer in charge. stainless steel exhaust hood size 36x36x20 providing by supplying, fixing and placing in position complete, stainless steel exhaust hoods made of 20 guage cold rolled coil sheet with stainless steel baffle filters & grease and it top edge must be at min 2400mm height. the front edge of hood shall be 400mm deep and backside shall be 500mm min deep and it shall be 300mm extra on front and sides than cooking area. exhaust fan either gec/ crompton make 18 dia and 1400 rmp non-magnetic with oil filters covering tandoor, chapati plate, chinese and indian sections of size 120approx 10 x36x18 complete in all respect and to the entire satisfaction of engineer in charge. stainless steel exhaust hood size 54x36x20 providing by supplying, fixing and placing in position complete, stainless steel exhaust hoods made of 20 guage cold rolled coil sheet with stainless steel baffle filters & grease and it top edge must be at min 2400mm height. the front edge of hood shall be 400mm deep and backside shall be 500mm min deep and it shall be 300mm extra on front and sides than cooking area. exhaust fan either gec/ crompton make 18 dia and 1400 rmp non-magnetic with oil filters covering tandoor, chapati plate, chinese and indian sections of size 120approx 10 x36x18 complete in all respect and to the entire satisfaction of engineer in charge. ducting ducts to exhaust :- providing by supplying, fixing and placing in position complete, galvanised iron duct 24 guage galvanised iron sheet for all exhaust hoods made of 20 gauge cold rolled coil sheet with ss baffle filters & grease, non-magnetic complete in all respect and to the entire satisfaction of engineer in charge. ducts to fresh air :- providing and supplying fresh air ducting 24 guage galvanised iron sheet as per air flow circulation duly painted with black paint over metal priming for kitchen and washing area complete in all respect and to the entire satisfaction of engineer in charge. gas cylinder cage size 48x24x40 providing by supplying, fixing and placing in position complete, cylinder cage made of m.s tubular frame with 40mm square pipe of 16 guage of size 48x24x40, shall be fixed with wall over raised platform upto plinth level and their sides, front doors and top in 20 gauge cold rolled coil sheet with locking arrangements and backside with solid mesh duly painted with red paint over metal priming complete in all respect and to the entire satisfaction of engineer in charge. lpg pipe fitting from cage to burner providing by supplying, fixing and placing in position complete, lpg pipe line fitting from cylinder cage upto lpg apparatus: 1 no. manifold 1 dia tata/ jindal c class pipe of 10 gauge, 1 nos skn or equivalent make manifold valves, 3 nos non return valve, 2 nos cylinder pig tails, 2 nos pin type adopters, regulator 2 pc., pipe line1/2 dia c class tata/ jindal of 10 gauge, needle valves, burner pig tails; all of the material shall be of isi mark and completly fixed as per site requirements approx length 40 complete in all respect and to the entire satisfaction of engineer in charge of proposed secuirity barracks for crpf at punjab raj bhawan, sector-6,

State Government

TRN :20699703 | 01 Jun, 2021

Tender Value : 0

Chandigarh Ut - Chandigarh

Tender for procurement, erection, testing and commissioning of scada compatible ultrasonic flow monitoring system for penstocks using clamp on type sensors in multipath configuration along with complete accessories for bhakra right bank power house pong power house and dehar power house

Central Government/Public Sector

TRN :20699784 | 27 Apr, 2021

Tender Value : 0

Chandigarh Ut - Chandigarh

Tender for supply of desktop computers

State Government

TRN :20701250 | 29 Apr, 2021

Tender Value : 40.0 Thousand

Chandigarh Ut - Chandigarh

Tender for supply of instrument trolley for hospitals

Central Government/Public Sector

TRN :20701659 | 30 Apr, 2021

Tender Value : 0

Chandigarh Ut - Chandigarh

Tender for allotment of shops premises on rent basis

State Government

TRN :20701698 | 10 May, 2021

Tender Value : 0

Chandigarh Ut - Chandigarh

Tender for purchase of ceremonial summer uniform white coat and blue pant for brass band and pipe band

Central Government/Public Sector

TRN :20703104 | 29 Apr, 2021

Tender Value : 10.61 Lacs

Chandigarh Ut - Chandigarh

Tender for manpower outsourcing services - minimum wage - skilled; admin; junior assistant

Central Government And Public Sector

TRN :20703209 | 27 Apr, 2021

Tender Value : 0

Chandigarh Ut - Chandigarh

Tender for operation and comprehensive maintenance of electromechanical services at te bldg sec20

State Government

TRN :20703394 | 29 Apr, 2021

Tender Value : 9.00 Lacs

Chandigarh Ut - Chandigarh

Tender for supply of real time pcr machine

State Government

TRN :20704265 | 29 Apr, 2021

Tender Value : 0

Chandigarh Ut - Chandigarh

Tender for supply of distribution transformer, 3 phase, 11 kv, > 200 kva up to and including 2500 kva

Related Locations of : Chandigarh

List of latest chandigarh-ut Tenders in Indian Tenders. Click on any chandigarh-ut Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for chandigarh-ut Tenders.

Tender for procurement, erection, testing and commissioning of scada compatible ultrasonic flow monitoring system for penstocks using clamp on type sensors in multipath configuration along with complete accessories for bhakra right bank power house pong power house and dehar power house

Tender for supply of desktop computers

Tender for supply of instrument trolley for hospitals

Tender for allotment of shops premises on rent basis

Tender for purchase of ceremonial summer uniform white coat and blue pant for brass band and pipe band

Tender for manpower outsourcing services - minimum wage - skilled; admin; junior assistant

Tender for operation and comprehensive maintenance of electromechanical services at te bldg sec20

Tender for supply of real time pcr machine

Tender for supply of distribution transformer, 3 phase, 11 kv, > 200 kva up to and including 2500 kva

Get Chandigarh Ut Tender Alert...

Related Locations of : Chandigarh

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us