Bidding Support

547120

Bidding Support

Warm Greetings from www.thetenders.com, the fastest growing tender information portal in India.

Supply Of Ci Cs Casted Items -C.I. Idler For Cane Carrier I As Per Drawing No. Ksc/Cc1/4/17, , C.I. Pulley As Per Drawing With Machining, C.I. Coupling Different Size As Per Drawing, C.I. Casting Various Size Gulla As Per Drawing With Rough Machining. Different Size, , Cast Steel Spur Gear & Pinion New Basis, Cast Steel & Spur Gear- 72 Teeth, Face Width- 75Mm, Bore- 50Mm Od- 473 Mm, Module- 6.4. Approx Weight 90 Kg, , Cast Steel & Spur Gear- 26 Teeth, Face Width- 75Mm, Bore- 45Mm Od- 178.24 Mm, Module- 6.4- Approx Weight 11.6 Kg, , Cast Steel Pinion- 24 Teeth, Face Width- 70Mm, Bore- 45Mm Od- 166.4 Mm, Module- 6.4 -Approx Weight 9.7 Kg, , Cast Steel Pinion- 34 Teeth, Face Width- 75Mm, Bore- 40Mm Od- 308 Mm, Module- 8.56. Approx Weight 20 Kg, , Cast Steel Gear Pinion- 50 Teeth, As Per Drg No. Mills-138Approx Weight 11 Kg, , Cast Steel Sprocket- 13 Teeth 6” Pitch, As Per Drg. Mills-27, , Cast Steel Pinion- 18 Teeth, Face Width- 75Mm, Bore- 45Mm Od- 128 Mm, Module- 6.4.Approx Weight 5 Kg, , C.S.Scaper For Mills Duly Machined As Per Sample Drg.No Ksc/Mh/91618 Approx Wt-190Kg Each, Cast Steel Trash Plate Lenth 1680 Mm Made Of Is 2708 Grade Iii Duly Rough Machined As Per Drg.No – Ksc/Mh/285/22, C.S. Wheel For Cane Unloader Bridge As Per Drg.No. Ksc/Unloader/2/17.Approx Wt 185 Kg., C.S Gear 68 Teeth, Module-6.14, Face Width-65Mm, O.D--430Mm, Drg No.-Ksc/Unloder/17, C.S.Wheel For Cane Unloder Trolly Drg No.-Ksc/Cr/145 Approx.Wight-55Kg, C.S.Pinion-18Teeth, Module-6.14, F.W-65 Od-122.8 Drg. No.-Ksc/Unloder/17, C.S. Sprroket 6 Pich 14 Teeth Drg No.-Ksc/M/1565 Tail End Material 2708, C.S. Sprroket 6 Pich 14 Teeth Drg No.-Ksc/M/1564 Driving Shaft Material 2708, C.S.Sproket-36 Teeth For Duplex Chain 2 1/2 Pitch Material 2708 Drg No Ksc/Boiler-163, C.S. Sprocket 17 Teeth For Duplex Chain 2 1/2 Pitch Material 2708 Drg No-Ksc/Mill/4887, Opertuinity Device Of Trash Turner Beam Material-Ss Drg No. Mills-8488, C.S. Pinion Duly Hardent Tempered And Grinded- 24 Teeth, Module-10, Fw-110Mm Od-260Mm Bore-50Mm, C.S. Pinion Duly Hardent Tempered And Grinded- 24 Teeth, Module-8, Fw-120Mm Od-208 Mm Bore-50Mm, C.S.Worm Shaft As Per Sample For Mill, C.S. Mill Coupling Weight 700Kg Approx As Per Drawing, C.S. Mill Crown Pinion 16 Teeth Weight 1500 Kg. As Per Drawing, Cast Steel Spur Gear & Pinion On Conversion Basis, Cast Steel & Spur Gear- 72 Teeth, Face Width- 75Mm, Bore- 50Mm Od- 473 Mm, Module- 6.4. Approx Weight 90 Kg, , Cast Steel & Spur Gear- 26 Teeth, Face Width- 75Mm, Bore- 45Mm Od- 178.24 Mm, Module- 6.4- Approx Weight 11.6 Kg, , Cast Steel Pinion- 24 Teeth, Face Width- 70Mm, Bore- 45Mm Od- 166.4 Mm, Module- 6.4 -Approx Weight 9.7 Kg, , Cast Steel Pinion- 34 Teeth, Face Width- 75Mm, Bore- 40Mm Od- 308 Mm, Module- 8.56. Approx Weight 20 Kg, , Cast Steel Gear Pinion- 50 Teeth, As Per Drg No. Mills-138Approx Weight 11 Kg, , Cast Steel Sprocket- 13 Teeth 6” Pitch, As Per Drg. Mills-27, , Cast Steel Pinion- 18 Teeth, Face Width- 75Mm, Bore- 45Mm Od- 128 Mm, Module- 6.4.Approx Weight 5 Kg, , C.S.Scaper For Mills Duly Machined As Per Sample Drg.No Ksc/Mh/91618 Approx Wt-190Kg Each, Cast Steel Trash Plate Lenth 1680 Mm Made Of Is 2708 Grade Iii Duly Rough Machined As Per Drg.No – Ksc/Mh/285/22, C.S. Wheel For Cane Unloader Bridge As Per Drg.No. Ksc/Unloader/2/17.Approx Wt 185 Kg., C.S Gear 68 Teeth, Module-6.14, Face Width-65Mm, O.D--430Mm, Drg No.-Ksc/Unloder/17, C.S.Wheel For Cane Unloder Trolly Drg No.-Ksc/Cr/145 Approx.Wight-55Kg, C.S.Pinion-18Teeth, Module-6.14, F.W-65 Od-122.8 Drg. No.-Ksc/Unloder/17, C.S. Sprroket 6 Pich 14 Teeth Drg No.-Ksc/M/1565 Tail End Material 2708, C.S. Sprroket 6 Pich 14 Teeth Drg No.-Ksc/M/1564 Driving Shaft Material 2708, C.S.Sproket-36 Teeth For Duplex Chain 2 1/2 Pitch Material 2708 Drg No Ksc/Boiler-163, C.S. Sprocket 17 Teeth For Duplex Chain 2 1/2 Pitch Material 2708 Drg No-Ksc/Mill/4887, Opertuinity Device Of Trash Turner Beam Material-Ss Drg No. Mills-8488, C.S. Pinion Duly Hardent Tempered And Grinded- 24 Teeth, Module-10, Fw-110Mm Od-260Mm Bore-50Mm, C.S. Pinion Duly Hardent Tempered And Grinded- 24 Teeth, Module-8, Fw-120Mm Od- 208 Mm Bore-50Mm, C.S.Worm Shaft As Per Sample For Mill, C.S. Mill Coupling Weight 700Kg Approx, C.S. Mill Crown Pinion 16 Teeth Weight 1500 Kg.

TRN :31690429
State Government / Sugar
Udhamsign Nagar - Uttaranchal

INDIAN Hire Our Expertise :

  • Tender Bidding
  • Tender Consultancy
  • Tender Advisory
  • Identify Eligibility Criteria
  • Identify Penelty Clauses
  • Highlight Important Dates
  • Technical Bid Preparation
  • Offline Bid Preparation
  • Online Bid Preparation
  • Offline Bid Submission
  • Online Bid Submission
  • Track Corrigendum / Addendums
  • Attend Pre Bid Meetings
  • Consistent Liaison & Coordination
  • EMD Follow Ups

INDIAN - bidding
image

We heartily welcome your move to excel your business to new heights.

Set Tender Alert

Activate daily alerts to know the tenders available of your work.

Get alerts

Bidding Support

Ask experts, how to fill bid forms, submit bids, participate in bids.

Get in touch

GeM Registration

Looking for GeM Registration? Get in touch with us and we will do the needful.

Registration

Digital Certificate

Get DSC for e-Tendering, e-Auction, e-bidding, Corporations / Associations / Others Tenders

Purchase now

Tender Awards

Want to know who's got the tender and are looking for subcontracting?

Connect now

Projects

Government and other private players, Real-time Updates of Project Information

Get info

International Tenders

We almost cover all the regions and countries across the world. Click to take your business to new heights.

Start now

Web Design

Get the Best Offers & Deals, expertise in developing static websites, dynamic websites and e-commerce.

Design now

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us

W B


Copyright ©2018 - Thetenders.com. Read Policies